com
> From: ah...@ah6le.net
> Date: Wed, 8 Sep 2010 18:24:41 -0700
> Subject: RE: [Repeater-Builder] Wacom WP-639 Duplexer question
>
> At 06:18 PM 9/8/2010, Richard Kelly wrote:
> >
> >
> > We will be trying other things such as adding a second ground rod
> &g
Good evening Eric,
Maybe this is why when the trasmit power is dropped to the 20-50 watt range,
the receive opens way up like it should. However, according to the spec sheets
regarding the Wacom SP-639 Duplexer, it is rated for 200 watts. So, again, not
sure what's going on. We will be try
i'm at work right now--I will get that info tomorrow!!
Rich K
W2RRK
x
To: Repeater-Builder@yahoogroups.com
From: aseyb...@andrewseybold.com
Date: Wed, 8 Sep 2010 16:38:49 -0700
Subject: RE: [Repeater-Builder] Wacom WP-639 Duplexer question
What repeater are you running? Is i
int value of 00,FF.
--- In Repeater-Builder@yahoogroups.com, MCH wrote:
>
> How do you set it back to normal?
>
> Joe M.
>
> Richard Arnold wrote:
> >
> >
> > There is an RSS software solution ("bitbang") to get rid of the alarms.
> > Conne
There is an RSS software solution ("bitbang") to get rid of the alarms.
Connect the RIB to the operating MSF.
>From the main menu hit ALT-F5. A command line bar will appear telling you to
>enter an IPCB command. Enter the following: (WITHOUT the " " quotes)
"/1e1607160800FF"
it is
The 5184621K70 cross references to 5184320A13. As a generic, its an LM-741
op-amp.
--- In Repeater-Builder@yahoogroups.com, "ac6vj" wrote:
>
>
>
> Hi Gang,
>
> I am looking for a Motorola M2170 8 pin DIP IC or a cross reference for it.
> It is used in a Mitrek transmit power control circuit.
Use your delete key and don't read them.
Richard, N7TGB
<http://www.n7tgb.net/> www.n7tgb.net
"A nation of sheep will beget a government of wolves."
Edward R. Murrow
_
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of
So, why do you keep posting this?
Richard, N7TGB
<http://www.n7tgb.net/> www.n7tgb.net
"A nation of sheep will beget a government of wolves."
Edward R. Murrow
_
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of AARON L
I have a pdf copy of the Moto Diplex Manual. If it s needed
I can upload it somewhere.
73, Dick, W1KSZ
-Original Message-
>From: skipp025
>Sent: Aug 23, 2010 12:49 PM
>To: Repeater-Builder@yahoogroups.com
>Subject: [Repeater-Builder] Re: Motorola Diplex Antenna Manual
>
>Re: Motorola D
In my line of work we have a term called Jesus clip, which refers to
E-Clips. The phrase was coined when, in removing one, it would go "ping" and
fly off to parts unknown. So, the first words said by the Tech, were: "Jesus
where did that go?"
Richard, N7TGB
<http://www.n7
Well, I think it's funny.
Richard, N7TGB
www.n7tgb.net
The problem with socialism is that eventually you run out of other people's
money
--Margaret Thatcher
_
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Kenneth Cook
Se
Sorry to hear of that. I hope you can get your computers cleaned once and
for all.
Richard, N7TGB
www.n7tgb.net
The problem with socialism is that eventually you run out of other people's
money
--Margaret Thatcher
_
From: Repeater-Builder@yahoogroups.com
[mailto:repeater
Who knows? When I see someone spamming a bunch of Yahoo groups, it can't be
good, and I definitely won't click on a link in the message.
Richard, N7TGB
www.n7tgb.net
The problem with socialism is that eventually you run out of other people's
money
--Margaret Thatcher
plugged
in, it runs continuously.
Richard
--- In Repeater-Builder@yahoogroups.com, "Brian J. Henry" wrote:
>
> I have an MSR 2000 repeater that I want to change the PL frequency on. Does
> anyone know if a KLN 6210A vibrasender will work in place of a KLN 6209A
> vibrasponde
Allow me to show my age ...
To me, the HT-220 is/was a Xtal Controlled Ht !!
The Forward/Reverse switch is the buttons on the
side. The flat knob on the right is the element
locking mechanism.
I have three of these and a box full of elements.
They are quite accurate, equaling a Bird 43. The
Gareth,
There are pre-amps on the input side. I have considered the possibility of rf
getting back into the receive side. I am running a similar configuration now
with a mono-band Antenex vhf antenna and Wacom 641's. It seems to be holding
its own.
Rich
- Original Message -
From:
I'd tell him no, because it is illegal.
Richard, N7TGB
www.n7tgb.net
The problem with socialism is that eventually you run out of other people's
money
--Margaret Thatcher
_
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of K
characteristics in a 1/4 tube constructed antenna than
that of the type of a mobile whip. at same frequency.
So Again thats not the exact true to a formula explanation but it gets the
picture in the minds eye of the electrical characteristics of an antenna, I
hope its clearer not muddie
Expect to see them on e-Pay soon ...
..."worked last time we plugged them (in)"...
73, Dick, W1KSZ
-Original Message-
>From: Joe
>Sent: Jun 30, 2010 8:36 AM
>To: Repeater-Builder@yahoogroups.com
>Subject: [Repeater-Builder] Death of a Service Monitor
>
>Worth watching if a service moni
Harbach sells a set of three that is for the SB-220. You might
look at them.
73, Dick, W1KSZ
-Original Message-
>From: kq7dx
>Sent: Jun 7, 2010 8:38 PM
>To: Repeater-Builder@yahoogroups.com
>Subject: [Repeater-Builder] MOVs for power supply primary
>
>Hello to group,
>Is putting a MOV
Tower location is an important piece of the equation. Big difference
between the East Coast and the Sonoran Desert !!
73, Dick, W1KSZ
-Original Message-
>From: dgrapach
>Sent: Jun 2, 2010 9:27 PM
>To: Repeater-Builder@yahoogroups.com
>Subject: [Repeater-Builder] Advice on 40 year old r
You forgot the most important text:
Microwave Spectroscopy by Townes & Shalow.
73, Dick, W1KSZ
-Original Message-
>From: allan crites
>Sent: May 31, 2010 8:38 PM
>To: Repeater-Builder@yahoogroups.com
>Subject: Re: [Repeater-Builder] Re: Help Needed (Guidance and advice) tuning a
>DB P
He didn't make it clear, but I think he's referring to the
Motorola_Software_Users group he has in the subject line. Repeater-Builder
moderators do an excellent job of spam control.
Richard
www.n7tgb.net
The problem with socialism is that eventually you run out of other peop
I've seen lots of groups die like that when the owner abandons it, but you
can go to Yahoogroups and do a search for one of similar interest.
Richard
www.n7tgb.net
The problem with socialism is that eventually you run out of other people's
money
--Margaret Thatcher
_
From
Do you mean a CW ID ?
73, Dick, W1KSZ
-Original Message-
>From: Gordon
>Sent: May 28, 2010 4:46 PM
>To: Repeater-Builder@yahoogroups.com
>Subject: [Repeater-Builder] Motorola Maxtrac for cw beacon
>
>Is it possible to mod a maxtrac for cw operation for a ham 6 meter repeater.
>If not m
For kicks, I re-tried it using various combinations of First Name ,
MI and Last Name. It finally hit on LN, FN, MI.
That's not how the licenses read ???
Glad I didn't check the exact match box !!
73, Dick, W1KSZ
-Original Message-
>From: Eric Lemmon
>Sent: May 11, 2010 10:15 PM
>To: R
Great system, can't even find my Amateur Extra Class License. I
wouldn't even try to find my GROL !!
73, Dick, W1KSZ
-Original Message-
>From: Eric Lemmon
>Sent: May 11, 2010 10:15 PM
>To: Repeater-Builder@yahoogroups.com
>Subject: RE: [Repeater-Builder] if you have a commercial licens
It looks very professionally done. I use something similar, except that it
is glued to a heat sink fin.
Richard
www.n7tgb.net
The problem with socialism is that eventually you run out of other people's
money
--Margaret Thatcher
_
From: Repeater-Builder@yahoogroup
e meantime some of the opinions
expressed are pretty funny.
Richard
www.n7tgb.net
The problem with socialism is that eventually you run out of other people's
money
--Margaret Thatcher
_
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf O
heard (usually on simplex
freqs)
Now I bet this will get things stirred up now won't they?
Richard
From: J C
To: Repeater-Builder@yahoogroups.com
Sent: Sat, May 1, 2010 12:30:08 AM
Subject: [Repeater-Builder] Re: A warning to Land Mobile Radio Dealers
good info!
Richard
From: Geert Jan de Groot
To: Repeater-Builder@yahoogroups.com
Sent: Sat, May 1, 2010 7:34:56 AM
Subject: [Repeater-Builder] Re: license-free radios
<1272619009.275.56317...@yahoogroups.com>
> While this one is not a huge pr
The few hams I've talked to, say "well, the frequencies aren't ours anyway,
so the FCC can do whatever they want with them. So, given that attitude, I'm
not surprised that few are commenting.
Richard
www.n7tgb.net
The problem with socialism is that eventually you run out of
Can you send me a copy of the program,please?
Thanks,
a...@n7tgb.net
Richard
www.n7tgb.net
The problem with socialism is that eventually you run out of other people's
money
--Margaret Thatcher
_
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.co
Thanks!
Sounds like it is time to change the password for the site, hmm?
Richard
www.n7tgb.net
The problem with socialism is that eventually you run out of other people's
money
--Margaret Thatcher
_
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroup
I have a Low-Split Maratrac (10 Meters) with a blown front end
(and I do mean fried ... looks like someone transmitted into it).
Do you have any Low-Splits with a blown Transmitter I can salvage
the receiver board from ?
Thanks, Dick, W1KSZ
-Original Message-
>From: Thomas Oliver
>S
Looking for a spare Low-Band Receiver, 12 or 13 split.
Failing that, I'll take the whole mobile.
Anyone have one they want to part with ?
Thanks, Dick, W1KSZ
The Low-Band MASTR II I am putting on 10 does not have
the Pre-Amp installed on the Receiver.
What are your opinions on adding one ? Is it worthwhile ?
73, Dick, W1KSZ
30 - 42 ???
I thought there was a 30 - 36 AND a 36 - 42 split.
73, Dick, W1KSZ
-Original Message-
>From: kd8biw
>Sent: Apr 2, 2010 8:12 PM
>To: Repeater-Builder@yahoogroups.com
>Subject: [Repeater-Builder] Re: Maxtrac
>
>John,
>
>I have 2 Micors, both low band. I have 1 complete contro
The combination number says it is a two channel 150-174 Mhz
Richard
www.n7tgb.net
The problem with socialism is that eventually you run out of other people's
money
--Margaret Thatcher
_
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Beha
Don't pitch them yet. If all else fails, they are programmable
devices and can be recycled.
I'll take them if no one else needs them. I can read what's in them
and see if I can make sense out of it.
73, Dick, W1KSZ
-Original Message-
>From: "larryjspamme...@teleport.com"
>Sent: Mar 2
Heh Thanks, I just sprayed coffee all over my keyboard!
Richard
www.n7tgb.net
The problem with socialism is that eventually you run out of other people's
money
--Margaret Thatcher
_
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Beha
On the subject of PL Encoder/Decoder: I was hoping that they
existed in a form factor that could plug into the MASTR II.
Failing that, I'll hardwire something in.
The reason for the different controllers: The NHRC will plug
into the MASTR II Mobile. The PSE will plug into the Card Cage
AND is
and can talk 50 miles
with your 50 watt radio, would you then expect to talk about 200 miles if you
changed it to a 5/8 antenna? Of cours not right? (Most 5/8 are typicaly 4
to 5db, so you kinda ket the idea right)?
Richard
From: Kevin Custer
To: Repeater
Have forwarded the questions to AA3ID who has the amp apart. We are third hand
at least on this amp but it did
operate at around 60 watts for ten years at 145.110 feeding 800 feet of 7/8
hardline into a ham cut db224.
when the tower came down it was given to me and i misread the pencil scratchin
I believe the ARRL did. I posted the link to it in an earlier message.
Richard
www.n7tgb.net <http://www.n7tgb.net/>
Government's first duty is to protect the people, not run their lives.
-- Ronald Reagan
_
From: Repeater-Builder@yahoogroups.com
[mailto:re
In my view this opens the door to other encroachments on our frequency
allocations.
Richard
www.n7tgb.net <http://www.n7tgb.net/>
Government's first duty is to protect the people, not run their lives.
-- Ronald Reagan
_
From: Repeater-Builder@yahoogroups.com
[mail
That is my concern, it'll be a foot in the door.
Richard
www.n7tgb.net <http://www.n7tgb.net/>
Government's first duty is to protect the people, not run their lives.
-- Ronald Reagan
_
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.c
Try this: http://www.arrl.org/news/stories/2010/02/25/11361/?nc=1
Richard
www.n7tgb.net <http://www.n7tgb.net/>
Government's first duty is to protect the people, not run their lives.
-- Ronald Reagan
_
From: Repeater-Builder@yahoogroups.com
[mailto:re
Since they'd be competing with high powered repeaters and government radars,
I thought 2.4 gig would have been a better choice than 70cm, but that's just
me...
Richard
www.n7tgb.net <http://www.n7tgb.net/>
Government's first duty is to protect the people, not run th
I feel a little pessimistic about this, in that I expect it to happen more
frequently as time passes. I hope I'm wrong, but I can't help feeling that
we are going to gradually lose our spectrum as companies with deep pockets
buy our frequencies out from under us.
Richard
www.n7tgb
of
that is in use anymore.
Good Luck!
-Richard
From: Chuck Kelsey
To: Repeater-Builder@yahoogroups.com
Sent: Sun, February 21, 2010 8:36:35 AM
Subject: Re: [Repeater-Builder] Re: DB-201 Measurements for 6 Meters?
First, the DB-201 was not designed for t
Should you not have a copy of the manual, you can get one from my website;
it is a great help and is how I learned to program those controllers.
http://www.n7tgb.net/Pages/radio/controller_manuals.htm
Richard
www.n7tgb.net <http://www.n7tgb.net/>
_
From: Repeater-B
riginal Message-
From: Repeater-Builder@ <mailto:Repeater-Builder%40yahoogroups.com>
yahoogroups.com
[mailto:Repeater-Builder@ <mailto:Repeater-Builder%40yahoogroups.com>
yahoogroups.com] On Behalf Of Richard MI Ranta
Sent: Wednesday, January 20, 2010 9:41 PM
To: Repeater-Builde
Wow, I wasn't aware lightening could do so much damage! Thanks Bob.
I'll pass that on to the technicians or they probably have already read it
here. ( yes, some of the technician's and even engineers read this list!)
We have replaced the repeater, so that much has been done. We may be in the
po
I thought I'd better update the list on what was found. First off, the
entire repeater was taken in to the shop for exhaustive testing. The can's
were taken apart, inspected and cleaned. All that was visibly found was a
little carbon. The two service monitors showed they were working ok. But,
when
Sorry if I've been late in posting. First, the antenna and hard line is ok.
We've tested that part out and its working. We think ( I ) that we got zapped
through a unused phone line which is mounted behind the repeater rack.
Yes, we have tested the can's using both a IRL (?sp) and a General Dynam
I know its been a long time since I first posed the question on what might be
causing the noise we were experiencing after being hit by lightening. After
many trips to the Technical shop for testing, we replaced the repeater ( was a
vertex 5000, now a Icom ur2000) and are in process of checking
I have two old rotary phones, one is an old fashioned wooden wall mount that
was built in the 60s.
Richard
<http://www.n7tgb.net/> www.n7tgb.net
"It does not take a majority to prevail ... but
rather an irate, tireless minority, keen on setting
brushfires of freedom in the m
ion. Maybe even a picture or the part number of
that PA would help.
Best Regards
Richard.
From: Greg Niles
To: Repeater-Builder@yahoogroups.com
Sent: Tue, January 5, 2010 9:33:59 PM
Subject: Re: [Repeater-Builder] Mastr II mods and parts
I am new t
.
-Richard
From: Eric Lemmon
To: Repeater-Builder@yahoogroups.com
Sent: Sun, January 3, 2010 8:26:41 PM
Subject: RE: [Repeater-Builder] Cold & MVP
Randy,
I am surprised that your building inspector allowed your repeater to be
installed at that location. Art
Tom,
Please be advised that boating laws do not specifically require a battery to be
in a box. What they do require is a battery to be securely mounted and the
"non-grounded" terminal covered. Most folks interpret that as a battery box or
bracket to old the battery in place. Most folks usual
Thanks, I appreciate it!
Richard
<http://www.n7tgb.net/> www.n7tgb.net
"It does not take a majority to prevail ... but
rather an irate, tireless minority, keen on setting
brushfires of freedom in the minds of men."
--Samuel Adams
_
From: Repeater-Builder
Well, it certainly is off topic, but you should have more of an open mind.
After all, people are entitled to their opinions, and to be able to speak
their minds.
Richard
<http://www.n7tgb.net/> www.n7tgb.net
"It does not take a majority to prevail ... but
rather an irate, tirele
Sure makes it look easy...
Richard
<http://www.n7tgb.net/> www.n7tgb.net
"When they call the roll in the Senate,
the Senators do not know whether to
answer 'present' or 'not guilty.'"
--President Theodore Roosevelt (1858-1919)
_
Fr
ja o que você
está procurando.
abraço
-Richard
From: Gustavo (Pu3gbw)
To: Repeater-Builder@yahoogroups.com
Sent: Tue, October 27, 2009 1:54:17 PM
Subject: [Repeater-Builder] Repeater Kenwood TKR-720
Greetings to all the group!
Hello everybody I am a resi
Thanks John for that Info. Will be headed into Town tomorrow & get what you
recomend.
Wesley
- Original Message -
From: John Sehring
To: Repeater-Builder@yahoogroups.com
Sent: Sunday, October 18, 2009 11:53 AM
Subject: [Repeater-Builder] Wavetek gone south
I've been usi
are very solid. (But not when you take them apart they are
quite the beast)
Good luck!
-Richard
From: Milt
To: Repeater-Builder@yahoogroups.com
Sent: Sun, October 18, 2009 9:38:14 AM
Subject: Re: [Repeater-Builder] Re: GE Lookout Repeater related info nee
Thanks Charles. Will try that. Have been thinking all day about buying an
Motorola or IFR. Hope that works. TKS
73 Wesley
- Original Message -
From: Ham-Radio
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, October 17, 2009 10:59 PM
Subject: RE: [Repeater-Builder] Wavete
Hi Walt,
Measure the radials of the ground plane, that might get you close. If there
near about 6 inches then its UHF, if they are near around 15 to 18 then it
would be in the VHF rage. But a picture could help some one spot it right away.
Regards
-Richard
running it
that low then I will mention that you can not do this. You need to run at near
the rated power for the PA to perform properly. (100w pa works best at 80+)
-Richard
From: W3ML
To: Repeater-Builder@yahoogroups.com
Sent: Sunday, October 4, 2009 2:24:34
Scott, Check your cables. Rick/RJB
--- On Sun, 10/4/09, Joe wrote:
From: Joe
Subject: Re: [Repeater-Builder] TXRX Duplexer Loss is HIGH??
To: Repeater-Builder@yahoogroups.com
Date: Sunday, October 4, 2009, 7:18 AM
Good Morning,
What frequency was the duplexer ordered for? In other wor
Tom,
A couple possibles here
1. signal is being radiated from the antenna back into your station because you
are in line with the beam pattern. Best if you can be directly under it. Could
also be getting in on other lines coming in such as un-shielded or poorly
shielded audio lines.
2. Bad con
Boy, would I love to visit that museum! I do remember some of that stuff,
and I used to own some of it.
Richard
<http://www.n7tgb.net/> www.n7tgb.net
"When they call the roll in the Senate,
the Senators do not know whether to
answer 'present' or 'not guilty.'&
Hi Bob,
You won't know until you ask the seller for the part number. But for the price
I would not fuss over trivial matters such as what split it is. The rest of it
is worth that just for the spare parts.
-Richard
From: "n...@no6b.com"
I very my search quarry just to get different results. Never know how folks are
spelling things. I have even had good luck finding stuff by incorporating "CB"
in my search. Got some pretty good deals that way.
-Richard
From: de W5DK
To: Repeat
the
needy first..;-)
Best regards
Richard
From: adjiqc
To: Repeater-Builder@yahoogroups.com
Sent: Monday, September 14, 2009 10:31:20 AM
Subject: [Repeater-Builder] GE Mastr II parts
Hi All,
I am new to this group and I was wondering if someone c
at’s my 2 cents, for what its worth.
Good Luck
-Richard
From: MCH
To: Repeater-Builder@yahoogroups.com
Sent: Sunday, September 13, 2009 4:07:34 PM
Subject: Re: [Repeater-Builder] Re: coax cable
Key word... --->jumpers< ---
You didn't h
Mike, please contact me directly at wb9...@sbcglobal.net thanks Rick/rjb
--- On Sun, 9/13/09, Mike Morris WA6ILQ wrote:
From: Mike Morris WA6ILQ
Subject: Re: [Repeater-Builder] msf5000 microphone
To: Repeater-Builder@yahoogroups.com
Date: Sunday, September 13, 2009, 12:21 AM
At 06:09
Tim,
This might be it. I miss read the previous. Try the Ringo for grins and see
what transpires. Might be a bad connection on the old antenna.
BR
-Richard
From: tahrens301
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday, September 1, 2009 4:02:35 PM
Hi Tim,
My first suspect would be the cable from the duplex er feeding the 7/8. I have
problems there more than anything. Although the 2.1 swr is a bit high I would
shoot the easy target first.
BR
_richard
From: tahrens301
To: Repeater-Builder@yahoogroups.
Navy MARS is also requiring a general license.
Richard
<http://www.n7tgb.net/> www.n7tgb.net
"When they call the roll in the Senate,
the Senators do not know whether to
answer 'present' or 'not guilty.'"
--President Theodore Roosevelt (1858-1919)
nity check on the input freq.
Be safe when you head to the hill and be sure you don't go alone. Never know
what you can get into in those remote locations right.
Good Luck
Richard
From: tahrens301
To: Repeater-Builder@yahoogroups.com
Sent: Tue
e connections on the station (before you start
turning the screws). Believe me, I have had to re-tune many a duplexer that
someone turned the screws on because of "desense" that was a cabling issue and
not the duplexer.
God luck on the adventure..
BR
-Richard
___
Hi All,
Any one looking for a Mastr II key (Mobile or base/repeater) only needs to go
to the local lock smith (Not Home Depot or Lowes, they only copy)
The Smith can cut you a key from the book. It is a BF10a. (I have done it)
Best Regards
Richard Fletcher
very
proud of the fact that his *private* system has only three users. This, to
me, is wrong and selfish in many ways.
Richard
<http://www.n7tgb.net/> www.n7tgb.net
"The trouble with socialism is that you eventually
run out of other people's money."
-Margaret Thatc
builder dot com
where you can find lots of info on them.
Remember that Google and Bing are your friend! just type in the make and model
of your antenna and you will find more than enough on your antenna.
Best Regards
Richard
From: Laryn Lohman
To: Repeater
Top quality crimpers are a must, though.
Richard
<http://www.n7tgb.net/> www.n7tgb.net
"The trouble with socialism is that you eventually
run out of other people's money."
-Margaret Thatcher
_
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil..
Are you kidding? The politicians don't care about the Constitution, to them
it is some totally irrelevant old document. In other words, they ignore it
and do whatever they want.
Richard
www.n7tgb.net
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater
-Richard
From: Barry
To: repeater-builder@yahoogroups.com
Sent: Saturday, June 27, 2009 8:46:58 PM
Subject: RE: [Repeater-Builder] Where to install my repeater antennas
You are going to need a lot more isolation than you are contemplating , either
fit cans
g with the Motrac other than when its 10 ton PA
gave out. (Its seems to run fine on just the exciter)
Regards
Richard
From: "rabre...@sbcglobal.net"
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, June 27, 2009 9:38:48 PM
Subject: [Repeater-
got some here please contact me at wb9...@sbcglobal.net
--- On Fri, 6/12/09, GUIDO wrote:
From: GUIDO
Subject: [Repeater-Builder] LOOKING FOR Motorola 450 to 470 75 watt Micor
Repeater Amp TLE1713A
To: Repeater-Builder@yahoogroups.com
Date: Friday, June 12, 2009, 9:11 PM
Hi all,
I am
Hi Norm,
I have seen this a couple times. Once was on an old Motorola Motrac and once
on a Mastr II.
Both were on UHF and both were because of a receive audio load problem. The
fix is making sure you have a speaker load on the receiver. Give that a try and
let me know if that seems to do the t
Good morning group.
Ah. Spring is here and with it, a blown output transistor on a Henry C130 AD
30R linear amplifier. It just blew around 8PM Wednesday evening. I thought
it must be lightening strike, due to scorched area around the part and
board. It almost looks like it tried to burn a hole r
Please contct me at wb9...@sbcglobal net
--- On Mon, 5/11/09, w1ik wrote:
From: w1ik
Subject: [Repeater-Builder] Motorola R-2001A Manual(s) needed!
To: Repeater-Builder@yahoogroups.com
Date: Monday, May 11, 2009, 5:36 PM
I am in need of service and operating manuals for the R-2001A Com
#x27;t know which
control signal you are using. Someone else mentioned using the printer port
and it seems to me that it would be ideal for your application.
Richard
<http://www.n7tgb.net/> www.n7tgb.net
_
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yah
Gosh, and it didn't sell!
Richard
<http://www.n7tgb.net/> www.n7tgb.net
_
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Chuck Kelsey
Sent: Sunday, April 12, 2009 11:01 AM
To: Repeater-Builder@yahoogroups.com
Subject: Re
YEah, but it is something that would be expected from California.
Richard
<http://www.n7tgb.net/> www.n7tgb.net
_
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of David Struebel
Sent: Wednesday, April 08, 2009 5:26 PM
To: Re
Some kind of weird sandwich?
Richard
www.n7tgb.net
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Chris Curtis
Sent: Wednesday, April 08, 2009 2:31 PM
To: Repeater-Builder@yahoogroups.com
Subject: RE: [Repeater-Builder
I fired off this reply without paying attention to the group it was
going to. Had I paid attention, I would have toned down the politics a
little. My apologies, I wasn't trying to anger anyone.
Yes, it was a "surprise".
Richard
<http://www.n7tgb.net/> www.n7tgb.n
eward them with hundreds of millions of dollars
instead. In other words, your typical democratic congress at work.
Richard
<http://www.n7tgb.net/> www.n7tgb.net
_
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of wd8chl
Sent: Sunday,
1 - 100 of 413 matches
Mail list logo