Anyone heard from Tom Hoopes lately? Haven't been able to raise him for
a few weeks now...
Tom
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages
There is more info on the sale
http://adesigner.com/hobbies
Click on "The Best Winch Battery
Chargers"
Then on Today's special
Tom
T&G32 Mount View DrAfton, VA
22920
540 943-3356fax 943-4178540
943-3356
I still have a couple of Battery Minders left for sale at 20% off list.
Info is here:
http://www.vdcelectronics.com/batteryminder_12v_1a.htm
Have them for Optimas also.
Tom
T&G
32 Mount View Dr
Afton, VA 22920
540 943-3356
fax 943-4178
540 943-3356
RCSE-List facilities provided by M
e and wing tape. Cheap also.
T&G
32 Mount View Dr
Afton, VA 22920
540 943-3356
fax 943-4178
540 943-3356
- Original Message -
From: "Brian Smith" <[EMAIL PROTECTED]>
To: "Tom Broeski" <[EMAIL PROTECTED]>
Sent: Sunday, January 02, 2005 7:57 AM
Subject: Re
Try this:
Take packing tape and fold over the amount of non-sticky area you want and
stick it to itself. Press out on a nice flat surface. Cut to 1/4" to 1/2"
sticky part (depending on what you are sticking it to) makes a nice gap
seal.
Tom
T&G
32 Mount View Dr
Afton, VA 2292
Skye Malcolm and I met at the Franklin County
Fairgrounds for an impromptu NYD fly-in. Skye was just back from
Arizona and was wearing shorts and tennis shoes, so we didn't last too
long.
Sky had found an upgraded
ZingWing out west, one of those foamy flying wings that folds in half
http://conk.widomaker.com/tmss/
T&G
32 Mount View Dr
Afton, VA 22920
540 943-3356
fax 943-4178
540 943-3356
- Original Message -
From: "Jerry Miller <" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>;
Cc: <[EMAIL PROTECTED]>
Sent: Saturday, January 01, 2005 9:43 PM
Subject: Re: [RCSE] Tha
iring views
imaginable...totally unexpectedly. Made my day.
--
Tom Rust
Nanochip Inc
48041 Fremont Blvd
Fremont, CA 94538
(510) 770-2507
(510) 339-6263
(510) 339-9636 FAX
(510) 912-4662 cell
http://www.nanochip.com
RCSE-List facilities provided by Model Airplane News. Send "subscribe" a
Edgar,
I had some computer trouble and lost some emails.
I have the Alfa Models P51 Mustang (Marie) in stock now. And the Original
Corsair you wanted.
Tom
T&G
32 Mount View Dr
Afton, VA 22920
540 943-3356
fax 943-4178
540 943-3356
RCSE-List facilities provided by Model Airplane News.
. Yellow top, blue bottom with blue/red points on wing/stab. Add
your RX and fly.
$1,300 plus shipping. Selling to fund another project.
Tom
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please not
,
Here's the post I supplied to Gordy and Helmut at Picolario in 2003
regarding the Picolario and the Alti, using the Stylus. Here's part
#2:
At 12:41 AM 07/20/03 +, Tom
Hoopes wrote:
===
Solution #2 - (7) channel RX, (2) free C-MIXes (C-MIX2 &
,
Here's the post I supplied to Gordy and Helmut at Picolario in 2003
regarding the Picolario and the Alti, using the Stylus. The first attempt
to send was bounced by RCSE due to a size restriction, so here is part
#1
At 12:41 AM 07/20/03 +0000, Tom
Hoopes wrote:
Hi all,
In an attempt to catch up
taxi it tomorrow or
the next day, and try flying it within the week. Right now we have deep
snow, capped by lots of ice and very cold temperatures.
Happy Holler Days
Tom
I spent a year in Houston one
summer.
Harley,
I recommend you get Outwater Plastics www.outwater.com
to send you the "Big" catalog. There are plenty of things I know you would
like.
I like using aluminum divider like alu1850
Tom
T&G
32 Mount View Dr
Afton, VA 22920
540 943-3356
fax 943-4178
540 943-3356
- Or
Dudes:
My mother-in-law is going to be
out of town for the holidays, so she stopped by tonight to give the family
Christmas gifts. She gave me this electric model plane that I have
not heard of before, and I hang out in a lot of hobby shops.
It is sort of toy-like but maybe int
In the argument over the choice between handicapping the plane and
handicapping the pilot, all I can say is that I come into the game already
handicapped so there is no point in picking on my plane.
Tom H. Nagel
Columbus, OH
RCSE-List facilities provided by Model Airplane News. Send
F3B pilots -
Need one of them mono line spool stick-in-the-drill-and-wind-the-line-in
thingies (looks like an anorexic upside-down cactus that holds the
spool). Is this something that a fishing supply outfit might have, or
is it a fabricate yourself kinda deal?
Tom
RCSE-List facilities
1) 3M #600, 1/2" wide
2) 3M #600, 3/4" wide as a permanent 'base' layer on both sides of
joint. Colored electrical tape (to match, of course!) as the actual
retaining layer. #600 prevents paint from pulling when the electrical
tape is removed.
Tom
Russ Light wrote:
Holy Greased Lightning, Batman! Placed an order with RC-Direct
yesterday afternoon...and it's on my doorstep today!
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be
ed on my second Extreme (after the first one met
an untimely demise) and my current Pike Superior had a similar, though
not as tight, joiner fit when new and all was well after slight fitting
work and time in the sun.
Tom
Ron Kramer wrote:
I picked up a Xtreme and the outer square carbon joiner is
I have one. The first one didn't work. Got a second one and the tip split
in two. The third works reasonable well, but the conical tip works much
better for small stuff than the one the comes with it. It is not as good as
the Weller butane one I have for larger areas, but it does do what it
t use
nicads any longer. You can recycle your Nickle Metal Hydrides by sending
them to me. I prefer an Airtronics or JR connector.
Tom H. NagelColumbus, OH
Take the lock with you, but use something like a binder ring or a hitch pin
on the airline. Securely fasten whatever you use to the case and hope they
put it back right if they do open the case.
If you use a lock, hang the key on the lock. Use a cable tie to keep both
the key and the lock atta
I have .070 carbon rods, Teflon tubing and adapters and clevis or ball link
ends
Tom
Do you have just the teflon tubes?
EDG
Pittsburgh
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please not
How much do you need? Is .070
okay?
T
T&G Hobbies32 Mount View DrAfton, VA 22920
540 943-3356fax 943-4178540 943-3356
- Original Message -
From:
Cal
Posthuma
To: [EMAIL PROTECTED]
Sent: Saturday, December 11, 2004 6:03
PM
Subject: [RCSE] Where to get?
This message is forwarded from Don Stackhouse and Joe Hahn at DJ Aerotech
Tom H. Nagel
Columbus, OH
- Original Message -
From: "Don Stackhouse @ DJ Aerotech" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
Sent: Friday, December 10, 20
When using a desulfating charger, the recommended voltage is 14 volts with
an Optima. Many low amp chargers are not high enough voltage, and others
are too high.
http://www.vdcelectronics.com/batteryminder_12v_optima.htm
We charge and maintain 4 at our field with a solar charger at 14.4 volts
ge should allow
us to evaluate how the shift may affect our attendance.
Watch the page above for updates.
=
Tom Kallevang
Wheeling, IL
LSF President & Webmaster
LSF #303 Level V #103
AMA L292
SOAR (Chicago)
__
Do you Yahoo!?
Yahoo! Ma
arned --
Know Your Neighbors.
T
T&G
32 Mount View Dr
Afton, VA 22920
540 943-3356
fax 943-4178
540 943-3356
- Original Message -
From: "Brian Smith" <[EMAIL PROTECTED]>
To: "Tom Broeski" <[EMAIL PROTECTED]>
Sent: Thursday, December 02, 2004 6:55 PM
owers
running all the time. Go figure.
T
T&G
32 Mount View Dr
Afton, VA 22920
540 943-3356
fax 943-4178
540 943-3356
- Original Message -
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Thursday, December 02, 2004 6:32 PM
Subject: Re: [RCSE] BRASS
That sucks Tom, so
If anyone is interested, I can take offers to the club this
weekend.
This means no ESL or Woody contests next year.
Tom
T&G
32 Mount View Dr
Afton, VA 22920
540 943-3356
fax 943-4178
540 943-3356
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "u
. Yellow top, blue bottom with blue/red points on wing/stab. Add
your RX and fly.
$1,375 shipped anywhere in ConUS. Selling to fund another project.
Tom
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please
Why bother? Just run both motors same direction and use the same type
props. You won't notice the difference. I've done side by side pushers
on Zagi's, also front, back pusher puller configs. Lots of power, but
sucks batteries fast (unless your using LiPos).
--
Tom Rust
Nan
About ten years ago my
wife knoew I was interested in RC planes, but had never tried it. So she
got me a .40 size RC trainer for Christmas, some sort of Goldberg
kit. No engine, no radio, no monokote--just a box of balsa.
I never really wanted to fly gas
power, so I took the k
Tough question. Overall, I
think I have had the most fun with the Infamous Flamingoid, the 2 meter
Gnome in yard flamingo drag. It has had three or so memorable
half hour flights, and one startling appearance at Mt. Knobly for the Cumberland
Slope Fun Fly. It flies better than it
As an early present, Late Summer Santa brought a Furio and then a
WinchNZ F3B winch. His elves just notified me that my mono order has
arrived as well...and since I have been good I put my name on the list
for a second Furio.
Mrs. Claus would be really pissed if all was known.
targetdrone wrot
don, or in some of the more urban areas as Deer Gun
Season.
I will be off in a tree somewhere, and
for once, not trying to retrieve a plane. If you write, it may take
me a while to get around to responding.
Tom H. NagelColumbus, OH
nce. I've used the antenna with the Berg4, Berg5,
Berg6, Hitec Super Slim, Airtronics 92777 "blue cube", and the
FMA M5 receivers.
The specified "tag length" is most likely called out to insure
optimum resonance with the "loaded" Berg Peel & Stick
a
's a new Sheriff in town when it comes to wing
wiring:
> There is are significant differences between Tom Hoopes
sailplane
> systems and what I custom-build for large scale aerobatic
aircraft.
>
> The differences were significant enough that I am now the
exclusive
> supplier of &quo
This was forwarded to me; it makes for impressive
reading on quick thinking...
Tom
> Subject: FW: DHL out of Baghdad] MISSILE HIT
> HELL OF A STORY
>
>
>
>
> >I know you all heard of the story of the DHL Plane
> that was hit by a
>
> >mis
Way cool, we had one here on Maui about 3 or 4
years ago, the owner was trying to make a business
flying people on "tours" of Maui. My buddy Lance got
to fly with him, I was too late.
He "buzzed" Maluhia (one of our slope sites) going
majestically overhead with a whoo
not that old, it was my Dad's book ;-)
Tom Hoopes - ([EMAIL PROTECTED])
-- Hoopes Designs -
"Taking the hassle out of wing wiring harnesses"
<http://www.hoopesdesigns.com>
Now that Greg’s 368’s are all
gone and if your still looking for more I still have a few 6 servo set deals at
$350.00 for 6 DS368’s if you want. Unfortunately I need 5.00 for shipping
so add that.
Tom Copp
Composite
Specialties
www.f3x.com
949-645-7032
-Original Message
thing about longest flight...
Tom
Ben Diss wrote:
What the heck is a "postal" contest?
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be
everything):
"On the back of your voucher, Under "Section 11 - Competition; A -
Size" it states: "All contestants must compete at the same location on
the same date".
Therefore, no postal contests are valid for LSF points."
=
Tom Kallevang
Wheeling, IL
LSF Preside
Looks like the list has been hit again...two people have gotten e-mails
with my address spoofed and an evil attachment.
Tom
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and
three
or four clicks of the flap stick.
This isn't exactly what you're looking for (true 'flight mode'
engagement with the flap stick), but might accomplish nearly the same
thing if these settings are available...worth looking into.
Tom
Jon Stone wrote:
When I use cr
y, the brain can control the pitch and
roll of the simulated craft in most weather conditions, including storms and
hurricane-force winds.
Tom H. NagelColumbus, OH
. In fact, the Tiger Moth took off autonomously, flew a
short aerobatic sequence including some axial rolls and an outside loop, and did
a three point landing at my feet.
It was however covered with goose down,
which I do not understand.
Later,
Tom H. NagelColumbus, OH
el 47. At least on the
Airtronics/JR shift.
Tom H. NagelColumbus, OH
be informed of action
which is deemed
appropriate by the Academy.
-AMA Frequency Committee
Teachers Discount Music
www.metronomes.net
[EMAIL PROTECTED]
- Original Message -
From: "Jim Porter" <[EMAIL PROTECTED]>
To: "Tom Watson" <[EMAIL PROTECTED]>
Cc: &
I am working on a PSS model of
SpaceShipOne, thus P1, an acronym than sounds like Gordy pissing on a flat
rock. Gotta work on that.
Parts so far: some EPP
beds left over from a Casavos boomerang, a clear 3-liter pop bottle,
a clear plastic peanut butter jar some 2" balsa T
Last week, the FCC approved national deployment of BPL. Who knows
whether the effort will really take off (no pun) in a big way, but they
have the green light.
The article I read stated that the HAM operator's concerns "could be
managed" but nothing regarding R/C interference.
The website is up on the new ISP and the DNS entries have been changed.
Should you try and use the email features on the website, mails may not
work correctly until after the weekend after the DNS entries have
propogated across the ether ...
Thanks for your patience.
=
Tom Kallevang
I told you so.
Still not sure about the sunspots, though.
Tom H. Nagel
Columbus, OH
- Original Message -
From: "Jerry Miller" <[EMAIL PROTECTED]>
To: "Terry Mickle" <[EMAIL PROTECTED]>; "Jerry Miller"
<[EMAIL PROTECTED]>; "Dean Gr
operational.
My apologies to those who have contacted me with the latest series of
problems with access via Linksys router/firewall, know that this was
the straw that broke the camel's back.
Regards,
=====
Tom Kallevang
Wheeling, IL
AMA L292
SOAR
LSF President & Webmaster
LSF #30
friend in particular nearly fell out of his seat...once he could
breathe again, he told me he worked for UPS at one time and that the
average person has no idea how close to reality that bit really was.
If you haven't seen the movie, the first five minutes alone are worth it.
Tom
George Voss w
The only plane I have had attacked in the air was the Infamous Flamingoid,
which is pink. I was doing a half hour thermal flight, and a couple of
buzzards, of all things, took offense at the presence of a Flamingoid in
their air and made repeated swoops at it. I did loops and stalls, and they
e
John Derstine writes:
from: John Derstine
To: 'Tom H Nagel' ; 'RCSE'
Sent: Wednesday, October 06, 2004 5:39
PM
Subject: RE: [RCSE] Mystery Plane found
at MOSS site
Was W in the area
again?
Endless
Mountain Models
http://www.scal
ID'd it as a NE
Sailplanes XE2, with a brushless AVEOX motor and an 8 cell nicad battery
pack.
If it is yours, email me and identify
the receiver and channel. Plane looks to be in pretty fair shape,
though it may have been outside for a few days.
Tom H. NagelColumbus, OH
Wow, I want to get one of those Pterosaurs to fly at Cumberland! Or do
combat against Gordy! (Pterosoar vs Gordysoar)! Sounds like a bad
Japanese sci fi movie.
Tom H. Nagel
Columbus, OH
- Original Message -
From: "Douglas, Brent" <[EMAIL PROTECTED]>
To: "RC
OK guys, Burt Rutan's Space Ship One crew just won
the Ansari X-Prize. The ship went to about 360,000 feet, re-entered
and landed safely.
Dave Garwood, we need a foamy PSS model
for this fall's sloping. Just stretch the wingspan a
little. Let me know when it's r
It is... I posted this last sunday.
Tom Siler
Columbus, OH
--- In [EMAIL PROTECTED], AJ Bhatta <[EMAIL PROTECTED]> wrote:
> One week?! I thought it was Sat(2nd) and Sun(3rd).
>
> AJ
>
>
>
>
> __
> Do you Yahoo!?
Only 1 week left 'till the FRU. Details and registration at www.rc-
aero.com/LOFT
The CDs are ready, the field is always ready, and the competition is
heating up for the OVSS finale!
Don't miss this one!
Tom Siler (Saturday CD)
Columbus, OH
RCSE-List facilities provided by Mode
, and all's well that ends in one piece.
Tom H. NagelColumbus, OH
I mean "at" Newcastle.
T&G
32 Mount View Dr
Afton, VA 22920
540 943-3356
fax 943-4178
540 943-3356
- Original Message -----
From: "Tom Broeski" <[EMAIL PROTECTED]>
To: "soaring" <[EMAIL PROTECTED]>
Sent: Wednesday, September 29, 2004 11:57
Here's a photo taken a Newcastle VA by Millard Scott last Saturday.
http://www.adesigner.com/brass/New%20Castle%20036%20mod.jpg
T
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe mess
I agree completely with Jack's approach to park
flyers. We do the same at MOSS and have recruited several new
members this way. We do Park Flyer Outreach at the local hobby store by
leaving flyers near the pile of GWS boxes.
- Original Message -
From:
Jack
Harper
To:
buy all my inventory of REAL 368's ASAP and put
them to proper use!
Tom Copp
Composite Specialties
www.f3x.com
949-645-7032
-Original Message-
From: Les or Gypsy Stockley [mailto:[EMAIL PROTECTED]
Sent: Tuesday, September 28, 2004 10:32 PM
To: soaring
Subject: [RCSE] DS368/361 Serv
Would really REALLY like to, but cannot.
Tom
[EMAIL PROTECTED] wrote:
Tom, next week at Muncie, the 2004 F3B Team Select. WILL YOU BE THERE ?
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please not
If anyone wants any of these, I can get them at a discount when they are
available.
Tom
T&G
32 Mount View Dr
Afton, VA 22920
540 943-3356
fax 943-4178
540 943-3356
- Original Message -
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Tuesday, September 28, 2004 4:5
so do the spectators);
6. Fly what you want, no "primary/backup" models designated;
We have a great time, fly all day, BS and funfly until dark (or later),
and most of us are still talking by the end of the weekend.
What's not to like?
=
Tom Kallevang
Wheeling, IL
AM
Topic for the month of October:
Which vendor makes the best downwind
turn while trying to nail the UPS guy with a landing skeg? And could
Gordy do it better?
Tom H. NagelColumbus, OH
with the programming via the DSC cord.
Tom Copp
Composite Specialties
www.f3x.com
949-645-7032
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and
unsubscribe messages must be sent
Shoot, even REAL airplanes know not to land downwind â
Tom Copp
Composite Specialties
www.f3x.com
949-645-7032
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: Monday, September 27, 2004 8:23 PM
To: [EMAIL PROTECTED]
Subject: [RCSE] Re: Soaring V1 #4359
In a
YES!! Bring it on!! F3B...F3B...F3B
Tom
New F3B guy
Jeff Steifel wrote:
You want to eliminate the landing or minimize it and have fun FLY
F3B!!!
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTE
Jim,
Check the stick length, they are set at the shortest length from the
factory and that makes the TX feel "hot" on the controls.
Tom Copp
Composite Specialties
www.f3x.com
949-645-7032
-Original Message-
From: James V. Bacus [mailto:[EMAIL PROTECTED]
Sent: Saturday, Se
I forwarded an email reply to the RCSE list that Gordy sent
to me in private.
I deeply apologize for that.
I didn’t notice the address was to me and not the
RCSE.
Totally my bad.
Sorry Gordy!
Tom Copp
Composite Specialties
www.f3x.com
949-645-7032
Hey hey hey,
That’s not my
Quote! Let’s not put Gordy’s words in my mouth please!!
Tom Copp
Composite Specialties
www.f3x.com
949-645-7032
-Original Message-
From: James V. Bacus
[mailto:[EMAIL PROTECTED]
Sent: Saturday, September 25, 2004
6:28 PM
To
I was careful not to sign one. Oh, and they left the patent number off it,
so it is in the public domain if someone wants to build one from scratch.
: )
I did that so that the guys who said they really wanted it and would have
paid more, can contact him and make him an offer. He will have it
Icon sold to Skip Richards.
Tom
T&G
32 Mount View Dr
Afton, VA 22920
540 943-3356
fax 943-4178
540 943-3356
- Original Message -
From: "Doug Barry" <[EMAIL PROTECTED]>
To: "Tom Broeski" <[EMAIL PROTECTED]>
Sent: Thursday, September 23, 2004 7:26
Believe me, I tried and so did Adam Till who shipped it. FedEx says the
actually don't "insure" items. I filled out the claim for a "model plane".
I hope Adam chimes in so you can get his take on it and what they told him.
You've been lucky.
Tom
T&G
32 Moun
At 09:35 PM 9/15/04 +, [EMAIL PROTECTED]
wrote:
Tom,
Again, great PIX, thanks..
Where can I buy those special " Airplane" Trophies?
Way Kool
Jack
--
Jack Strother
Granger, IN
Hi Jack,
Actually one of my other hobbies is woodworking. I've made all of the
planes for the
tended and thanks for the vendor raffle support.
Enjoy!
Tom Hoopes - ([EMAIL PROTECTED])
-- Hoopes Designs -
"Taking the hassle out of wing wiring harnesses"
<http://www.hoopesdesigns.com>
RCSE-List facilities provided by Model Airplane News. Send &q
nd
VP, or just the incumbents. Captain Jack thinks I am
hallucinating. On the other hand, just because you are paranoid doesn't
mean they aren't really out to get you.
Have fun and be safe.
Tom H. NagelColumbus, OH
Here's some more pictures from Soar Utah 2004, held this last weekend.
Tauno Knuuttila, one of our local IMSF members, took the pics. Enjoy!
http://www.physics.utah.edu/~taunok/Rc-planes/Pics/Events/Soar-Utah-2004/index.htm
Tom Hoopes - ([EMAIL PROTECTED])
-- Hoopes De
The first ICON is sold to Dave Butkovich.
Hans is first on the list (may have another RTF one in a couple of weeks).
(Just for those who didn't respond it was $309 below cost).
Tom
T&G
32 Mount View Dr
Afton, VA 22920
540 943-3356
fax 943-4178
540 943-3356
RCSE-List facilities provided
lped to find my plane. We were
able to narrow the search area with several witness points of view,
especially Don Vicker's vantage point. Extra eyes and ears made the search
more thorough and Blinki's beep was invaluable.
A couple of things worked out right that time...
Tom Hoopes - ([E
Go back a few months and read Dave Brown's President's Column in Model
Aviation ... he speaks of working with the government on model issues
like shipping on airliners, etc.
Makes sense that AMA has been so successful in collaborating with gov't
due to the demonstated ability to self-regulate. Yo
9 months 8 days before it was retrieved. Tree was really only a small
bush, but far away from where I thought it landed.
T
T
T&G
32 Mount View Dr
Afton, VA 22920
540 943-3356
fax 943-4178
540 943-3356
- Original Message -
From: "Bill Swingle" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECT
I use both in my Pike Superiors (the JR on flaps and the Hitec on
ailerons) and have not had a single problem in a year of flying.
Tom
Norman E. Timbs, Jr. wrote:
I'm looking for some hands-on opinions with the current generation of
thin, wing-type servos, particularly the JR DS168 and the
I have some Polk Synth Micro Seeker 6 on sale for $58 if anyone is
interested.
These are great all channel receivers. Maybe about the same volume as the
HS Super 6. and smaller than the HS 555.
Tom
T&G
32 Mount View Dr
Afton, VA 22920
540 943-3356
fax 943-4178
540 943-3356
RCSE-
I've found the only reliable way to communicate with them is verbally.
Do that and you can't go wrong.
Tom
brian wrote:
have they just fallen off the map? sent an order
and a followup inquiry and have heard nothing
back.
RCSE-List facilities provided by Model Airplane News. Send
For old times --- is there a list of the models flown in the Nostalgia
event? Impressive list of contestants. Nice to know who flew what.
tom
-Original Message-
From: Tom Kallevang [mailto:[EMAIL PROTECTED]
Sent: Monday, August 02, 2004 10:47 PM
To: RCSE Soaring Exchange; [EMAIL
It'll be on ESPN-8 (The Ocho)...
Tom
Tom H. Nagel wrote:
If RC sailplane events ever make it onto ESPN-2 it will be the F3-B speed event
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Pleas
Consider them sold.
Tom
T&G32 Mount View DrAfton, VA 22920
540 943-3356fax 943-4178540 943-3356
- Original Message -
From:
Dan
Neelands
To: [EMAIL PROTECTED]
Sent: Saturday, July 17, 2004 5:46
PM
Subject: [RCSE] Vision Package for
sale
Too
.
Tom
-Original Message-
From: Jared [mailto:[EMAIL PROTECTED]
Sent: Thursday, July 15, 2004 9:33 AM
To: 'Marty Timm'; [EMAIL PROTECTED]
Subject: RE: [RCSE] Growing list. Inbox Filters
Personally I like the e-mail format. You can already view (and I believe
post) to this list,
r the Awards
Banquet.
Latest updates just put up on the donors' page last night.
Hurry, there is still time to add your name ... contact me at
[EMAIL PROTECTED] if you would like to donate.
Thanks,
=
Tom Kallevang
Wheeling, IL
AMA L292
SOAR
LSF President &am
OK, so who is going to do a PSS sloper of
SpaceShipOne?
Bill and Bunny were looking for a
project. Here you go--even sort of a flying wing.
Tom H. NagelColumbus, OH
401 - 500 of 1092 matches
Mail list logo
