-Original Message-
From: softimage-boun...@listproc.autodesk.com
[mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of Sven Constable
Sent: October-29-14 3:47 PM
To: softimage@listproc.autodesk.com
Subject: RE: Upgrading Softimage. Was: Stand-Alone to Network license?
Maybe its
@listproc.autodesk.com
Subject: RE: Upgrading Softimage. Was: Stand-Alone to Network license?
Sorry if I'm missing the point, but what is the concern here (is there any
outstanding concern)? The functionality is all there. Both products are
licensed to run on the same workstation - as Luc Eric says
Message-
From: softimage-boun...@listproc.autodesk.com
[mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of Sven Constable
Sent: October-29-14 3:47 PM
To: softimage@listproc.autodesk.com
Subject: RE: Upgrading Softimage. Was: Stand-Alone to Network license?
Maybe its of interest
...@listproc.autodesk.com
[mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of Jill Ramsay
(Contractor)
Sent: Friday, October 31, 2014 4:53 PM
To: softimage@listproc.autodesk.com
Subject: RE: Upgrading Softimage. Was: Stand-Alone to Network license?
Sorry if I'm missing the point, but what
Angus Davidson schreef op 28-10-2014 18:01:
Hi Jill
Can these changes please be updated the resellers. They are normally the
first point of call for the customers and so far they in large been
inaccurate with their advise,
Kind regards
Angus
But then again: if more and clear information
] On Behalf Of Angus Davidson
Sent: October-28-14 1:01 PM
To: softimage@listproc.autodesk.com
Subject: Re: Stand-Alone to Network license?
Hi Jill
Can these changes please be updated the resellers. They are normally the first
point of call for the customers and so far they in large been inaccurate
@listproc.autodesk.com
Subject: Re: Stand-Alone to Network license?
Hi Jill
Can these changes please be updated the resellers. They are normally the first
point of call for the customers and so far they in large been inaccurate with
their advise,
Kind regards
Angus
, October 29, 2014 7:20 PM
To: softimage@listproc.autodesk.com
Subject: Re: Stand-Alone to Network license?
Great, and even if it may have missed a point or two, the May version
was already was quite straightforward.
Thanks very-much for your efforts in making it so!
J
On 10/29/14 12:14, Jill Ramsay
This applies to customers on subscription as well, or so it would seem.
My Softimage license turned into a MayaS license, where MayaS obviously
stands for Maya plus Softimage.
In the subscription center a separate download for Softimage 2015 is
available,
but the license issue by registeronce
Leendert A. Hartog schreef op 29-10-2014 21:07:
This applies to customers on subscription as well, or so it would seem.
My Softimage license turned into a MayaS license, where MayaS
obviously stands for Maya plus Softimage.
In the subscription center a separate download for Softimage 2015 is
Thanks (again) Jill! Looking forward to it!
J
On 10/27/14 10:53, Jill Ramsay (Contractor) wrote:
Hey guys,
I agree the updated FAQ (May) should contain the information that you can
purchase new seats of the bundle - I'll see if I can get that added. Please
don't refer to the original FAQ
Hi Jill
Can these changes please be updated the resellers. They are normally the
first point of call for the customers and so far they in large been
inaccurate with their advise,
Kind regards
Angus
On 2014/10/28, 6:54 PM, Jason S jasonsta...@gmail.com wrote:
Thanks (again) Jill! Looking
On a related note, it is a good time to check the Autodesk Store for the Desktop
Subscription.
In my specific case (e.g. locationlicenses) I see that updating my
subscription before Feb. 1st 2015:
Autodesk Entertainment Creation Suite Ultimate Subscription Advanced Support 1
Year from my
: Stand-Alone to Network license?
2) You can buy the Maya + Softimage or Max + Softimage bundle for the same
price as Maya or Max until Feb 1, 2016. Contact your reseller.
4) In neither of the above cases 2) or 3) do you need to be on subscription.
That's great Jill, seems much more reasonable
2) You can buy the Maya + Softimage or Max + Softimage bundle for the same
price as Maya or Max until Feb 1, 2016. Contact your reseller.
4) In neither of the above cases 2) or 3) do you need to be on subscription.
That's great Jill, seems much more reasonable!
and sorry if I confused the
@listproc.autodesk.com
Subject: Re: Stand-Alone to Network license?
I think it is tough to blame any for NOT totally understanding the situation.
-Original Message-
From: Luc-Eric Rousseau
Sent: Friday, October 24, 2014 4:04 PM
To: softimage@listproc.autodesk.com
Subject: Re: Stand-Alone to Network
So I downloaded the redshift demo...and it errors out right away with a
message about it being unable to operate with less than 256mb of free
vram. All of the values other than the card type are at 0 or 0kb. Any
ideas?
I have a gtx 560 ti i believe with 1 gig. No sli setup.
I was looking to
...@gmail.com]
Sent: 24 October 2014 10:05 AM
To: softimage@listproc.autodesk.com
Subject: Re: Stand-Alone to Network license?
So I downloaded the redshift demo...and it errors out right away with a message
about it being unable to operate with less than 256mb of free vram. All of the
values
fully functional trial licences.
Kind regards
Angus
--
*From:* Patrick Neese [patrickne...@gmail.com]
*Sent:* 24 October 2014 10:05 AM
*To:* softimage@listproc.autodesk.com
*Subject:* Re: Stand-Alone to Network license?
So I downloaded the redshift demo
Angus
--
*From:* Patrick Neese [patrickne...@gmail.com]
*Sent:* 24 October 2014 10:05 AM
*To:* softimage@listproc.autodesk.com
*Subject:* Re: Stand-Alone to Network license?
So I downloaded the redshift demo...and it errors out right away with
a message about
@listproc.autodesk.com
*Subject:* Re: Stand-Alone to Network license?
So I downloaded the redshift demo...and it errors out right away
with a message about it being unable to operate with less than
256mb of free vram. All of the values other than the card type
are at 0 or 0kb. Any ideas
ubject: Re: Stand-Alone to Network
license?
So I downloaded the redshift
demo...and it errors out
[mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of Jason S
Sent: October-23-14 5:32 PM
To: softimage@listproc.autodesk.com
Subject: Re: Stand-Alone to Network license?
Also for the 2015 to be somewhat more common than, or not exclusive to a bunch
of subscribers.
Actually I wish you could just
Hi Jill,
Elsewhere on this list I noted a couple of days ago that the document
currently online as the updated FAQ might require some additional
update, in that it was intentionally sparse, but might have gotten too
sparse in the process.
Greetz
Leendert
--
Leendert A. Hartog AKA Hirazi
-
From: softimage-boun...@listproc.autodesk.com
[mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of Jason S
Sent: October-23-14 5:32 PM
To: softimage@listproc.autodesk.com
Subject: Re: Stand-Alone to Network license?
Also for the 2015 to be somewhat more common than, or not exclusive
Of Jason S
Sent: October-23-14 5:32 PM
To: softimage@listproc.autodesk.com
Subject: Re: Stand-Alone to Network license?
Also for the 2015 to be somewhat more common than, or not exclusive
to a bunch of subscribers.
Actually I wish you could just sell Softimage 2015 (+ SP's) as it is.
No support
@listproc.autodesk.com
Subject: Re: Stand-Alone to Network license?
Also for the 2015 to be somewhat more common than, or not exclusive to a
bunch of subscribers.
Actually I wish you could just sell Softimage 2015 (+ SP's) as it is.
No support, .. and even if only available to Softimage users
I was quoted around 3000us to upgrade plus subscription.
-Original Message-
From: Luc-Eric Rousseau luceri...@gmail.com
Sent: 10/24/2014 1:57 PM
To: softimage@listproc.autodesk.com softimage@listproc.autodesk.com
Subject: Re: Stand-Alone to Network license?
Sorry, 6k+ to upgrade from
...@listproc.autodesk.com] On Behalf Of
Jason S
Sent: October-23-14 5:32 PM
To: softimage@listproc.autodesk.__com
mailto:softimage@listproc.autodesk.com
Subject: Re: Stand-Alone to Network license?
Also for the 2015 to be somewhat more common than
(Sorry, see erratum added between the asterisk)
Unless I missunderstood (?), the only way to access SI 2015 (if not on
sub)...
Ultimate Entertainment Creation Suite
Buy $ 6825 (more like 7k)
or if already specifically purchased the UECS .. (which I hardly think
would the case **for
Rousseau
Sent: 10/24/2014 1:57 PM
To: softimage@listproc.autodesk.com
Subject: Re: Stand-Alone to
Network license?
Sorry, 6k+ to upgrade from what product to what
product?
On Oct 24, 2014 1:07 PM, "Ja
On Fri, Oct 24, 2014 at 2:58 PM, Jason S jasonsta...@gmail.com wrote:
Unless I missunderstood (?), the only way to access SI 2015 (if not on
sub)...
Ultimate Entertainment Creation Suite
It's a bit discouraging that you missed all the info in the FAQ, the
webinar and the post here from jill !
yes, you upgrade and get on sub (both), so it was like 2500 + 600 (give or
take).
From: Jason S
Sent: Friday, October 24, 2014 3:12 PM
To: softimage@listproc.autodesk.com
Subject: Re: Stand-Alone to Network license?
Phil, do you mean that, if you aren't on sub, you CAN get on sub
] On
Behalf Of Jason S
Sent: Friday, October 24, 2014 9:12 PM
To: softimage@listproc.autodesk.com
Subject: Re: Stand-Alone to Network license?
Phil, do you mean that, if you aren't on
sub, you
I think it is tough to blame any for NOT totally understanding the
situation.
-Original Message-
From: Luc-Eric Rousseau
Sent: Friday, October 24, 2014 4:04 PM
To: softimage@listproc.autodesk.com
Subject: Re: Stand-Alone to Network license?
On Fri, Oct 24, 2014 at 2:58 PM, Jason S
have to upgrade (2500 or discount
slightly when on special) and then buy subscription on top of that (600 some
for Maya).
From: phil harbath
Sent: Friday, October 24, 2014 4:06 PM
To: softimage@listproc.autodesk.com
Subject: Re: Stand-Alone to Network license?
yes, you upgrade and get on sub
...
got 3dsmax for free.
Lol! xD
On 10/24/14 15:51, Sven Constable wrote:
I
just ordered the upgrade/update to soft2015 NLM and I was
never on sub. Rather expensive
Hurry up and learn 3DS Max, it's the next to be axed.
UX Designer
www.ericlampi.com
On Fri, Oct 24, 2014 at 5:22 PM, Jason S jasonsta...@gmail.com wrote:
... got 3dsmax for free.
Lol! xD
On 10/24/14 15:51, Sven Constable wrote:
I just ordered the upgrade/update to soft2015 NLM and I
To: softimage@listproc.autodesk.commailto:softimage@listproc.autodesk.com
Subject: Stand-Alone to Network license?
So I bought a Standalone license last year, before Softimage was killed, and
recently I have been trying to figure out if there is a way I can upgrade to
2014 networked version so
Mental ray standalone from Autodesk has come with the Softimage
shaders for years.
It renders mi2 from Max, Maya, Softimage. There is only one kind of
mental ray standalone license.
The batch licenses you get with the app are to run xsibatch or
mayabatch, etc., it is not to run ray.exe
On Wed,
This is long...TL;DR at the bottom
So, I'm using mental ray because it came with Softimage, it is well
established and adding 5 batch render node licenses was supposed to be
cheap. 3rd party renders all seem to lack some feature and are as
expensive as the 5 batch render node upgrade. Mental ray
Pssst!! Redshift (!) ;)
On 10/23/14 11:52, Luc-Eric Rousseau wrote:
On Thu, Oct 23, 2014 at 11:18 AM, Patrick Neese patrickne...@gmail.com wrote:
The reseller I talked with said I have unlimited render nodes for Max
and Backburner for Mental Ray and to just use that. I don't know what
Actually, it seems that it doesn't work
Based on this..
...
However, Autodesk has an article about how the configuration of
this stuff
image-boun...@listproc.autodesk.com
[mailto:softimage-boun...@listproc.autodesk.com]
On Behalf Of Patrick Neese
Sent: Wednesday, October 22, 2014 10:52 AM
To: softimage@listproc.autodesk.com
Subject: Stand-Alone to Netwo
Also for the 2015 to be somewhat more common than, or not exclusive to
a bunch of subscribers.
Actually I wish you could just sell Softimage 2015 (+ SP's) as it is.
No support, .. and even if only available to Softimage users, say
people on this list + current SI-Community Users.
(If too
to Send-To from say 2015 to a much earlier
version like 2013.
Thanks,
Hsiao Ming
From: softimage-boun...@listproc.autodesk.com
[mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of Jason S
Sent: Friday, October 24, 2014 4:12 AM
To: softimage@listproc.autodesk.com
Subject: Re: Stand-Alone
So I bought a Standalone license last year, before Softimage was
killed, and recently I have been trying to figure out if there is a
way I can upgrade to 2014 networked version so I can have a 5 batch MR
render nodes. I found FEE06-797413-0101 but an Autodesk chat rep, my
reseller and another
I don't like your odds friend :(
On 22 October 2014 18:52, Patrick Neese patrickne...@gmail.com wrote:
So I bought a Standalone license last year, before Softimage was
killed, and recently I have been trying to figure out if there is a
way I can upgrade to 2014 networked version so I can have
[mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of Patrick Neese
Sent: Wednesday, October 22, 2014 10:52 AM
To: softimage@listproc.autodesk.com
Subject: Stand-Alone to Network license?
So I bought a Standalone license last year, before Softimage was killed, and
recently I have been
: Wednesday, October 22, 2014 10:52 AM
To: softimage@listproc.autodesk.com
Subject: Stand-Alone to Network license?
So I bought a Standalone license last year, before Softimage was killed, and
recently I have been trying to figure out if there is a way I can upgrade to
2014 networked version so
: Wednesday, October 22, 2014 2:12 PM
To: softimage@listproc.autodesk.com
Subject: Re: Stand-Alone to Network license?
Matt thanks. I had this thought as well, but...the wording of the license
agreement for 2014 leaves a little question whether this is legitimate because
the MI2 would not have been
...@listproc.autodesk.com] On Behalf Of Patrick Neese
Sent: Wednesday, October 22, 2014 10:52 AM
To: softimage@listproc.autodesk.com
Subject: Stand-Alone to Network license?
So I bought a Standalone license last year, before Softimage was killed,
and recently I have been trying to figure out
From: softimage-boun...@listproc.autodesk.com
[mailto:softimage-boun...@listproc.autodesk.com]
On Behalf Of Patrick Neese
Sent: Wednesday, October 22, 2014 10:52 AM
To: softimage@listproc.autodesk.com
Subject: Stand-Alone to Netwo
On Wed, Oct 22, 2014 at 8:27 PM, Jason S jasonsta...@gmail.com wrote:
Can't render Mi2's,
Can't 'SendTo' non-synched versions,
can't buy latest (or -last-) version of SI, weather or not you're a long
time user/customer looking to replace -recent existing- licences.
can't not rent,
can't,
Sorry for the outburst, I sometimes
find unfairness so unfair.
On 10/22/14 21:09, Ed Manning wrote:
On Wed, Oct 22, 2014 at 8:27 PM,
Jason S jasonsta...@gmail.com
wrote:
55 matches
Mail list logo