*Cc:* Dennis Younker NE6I
*Subject:* Re: [wsjt-devel] RC2 syslog file
I tried changing the priority of WSJT-X this morning but do not see
any difference. The capture below is using Priority set to Realtime. I
also tried Above Normal and High. Note that these logged drop outs are
occurring at
;WSJT software development'
Cc: Dennis Younker NE6I
Subject: Re: [wsjt-devel] RC2 syslog file
I tried changing the priority of WSJT-X this morning but do not see any
difference. The capture below is using Priority set to Realtime. I also tried
Above Normal and High. Note that these l
audio
entry.
--Dennis NE6I
-Original Message-
From: Black Michael via wsjt-devel
Sent: Friday, July 22, 2022 8:44 PM
To: Dennis Younker NE6I via wsjt-devel
Cc: Black Michael
Subject: Re: [wsjt-devel] RC2 syslog file
That's a pretty consistent bunch of dropped
On Fri, 22 Jul 2022, Black Michael via wsjt-devel wrote:
I'd appreciate if users could check their wsjtx_syslog.log file.
For Windows users it will be in C:\Users\[username]\Appdata\WSJT-X
For Linux users /[username]/.local/share/WSJT-X
Should look like this and have one warning possibly about
: [wsjt-devel] RC2 syslog file
That's a pretty consistent bunch of dropped audio samples.
As I asked another user have you tried raising the priority of WSJT-X to see if
making it real-time improves things?
Mike W9MDB
On Friday, July 22, 2022 at 07:17:20 PM CDT, Dennis Younker NE6
You mean lots of dropped audio?
What model Mac?
Can you raise the process priority?
Mike W9MDB
On Friday, July 22, 2022 at 11:02:29 PM CDT, Hisashi T Fujinaka
wrote:
On Fri, 22 Jul 2022, Black Michael via wsjt-devel wrote:
> I'd appreciate if users could check their wsjtx_syslog
: 960 (0.02 S)
--Dennis NE6I
-Original Message-
From: Black Michael via wsjt-devel
Sent: Friday, July 22, 2022 8:38 AM
To: WSJT Software Development
Cc: Black Michael
Subject: [wsjt-devel] RC2 syslog file
I'd appreciate if users could check their wsjtx_syslog.log file.
For Window
samples: 960 (0.02 S)
--Dennis NE6I
-Original Message-
From: Black Michael via wsjt-devel
Sent: Friday, July 22, 2022 8:38 AM
To: WSJT Software Development
Cc: Black Michael
Subject: [wsjt-devel] RC2 syslog file
I'd appreciate if users could check their wsjtx_syslog.log file.
For Wi
Hi Mike,
On 7/22/22 10:37, Black Michael via wsjt-devel wrote:
> I'd appreciate if users could check their wsjtx_syslog.log file.
> For Windows users it will be in C:\Users\[username]\Appdata\WSJT-X
> For Linux users /[username]/.local/share/WSJT-X
>
> Should look like this and have one warning po
I'd like to see some more detail
Please place this file as described below
https://www.dropbox.com/s/t52ngcalsgnpm8m/wsjtx_log_config.ini?dl=0
C:\Users\[username]\AppData\Local\WSJT-X
The WSJT-X_Rigcontrol.log file will be in the same location
For Linux put it in
~/.config
Mike,
A couple additional warnings but all seem to be working ok..
[SYSLOG][2022-07-22 19:08:02.659095][00:00:00.001682][info] Log Start
[SYSLOG][2022-07-22 19:08:02.659095][00:00:00.001767][info] WSJT-X
v2.6.0-rc2 994e3f by K1JT et al. - Program startup
[SYSLOG][2022-07-22 19:08:02.679860][
I had 11 audio warnings in 10 seconds today. Had the same or more on previous days. Also when using 2.5.4 I am running an Icom 7300 with a Dell windows 10 box.KD2RWCOn Jul 22, 2022 11:37 AM, Black Michael via wsjt-devel wrote:I'd appreciate if users could check their wsjtx_syslog.log file.
For Win
Thanks...
I have fixed the netrigctl errors which were left over debug stuff.
The error in get_vfo is a known one for Icom rigs --- that will remain an error
until Icom provides a way to determine the current vfo. A long-standing pet
peave of mine.
Mike W9MDB
On Friday, July 22, 2022
Mike,
I renamed my old file since it was too large and then started the WSJT-X
program.
I am using Win 10, 64-bit, Radio=IC-7610, mode was FT8 on 15 meters.
Hope this helps.
73, Gene, K5PA
See file attached. Contents is listed below.
[SYSLOG][2022-07-22 17:26:20.174566][00:00:00.000364][in
On 22.7.2022 18.37, Black Michael via wsjt-devel wrote:
I'd appreciate if users could check their wsjtx_syslog.log file.
For Windows users it will be in C:\Users\[username]\Appdata\WSJT-X
For Linux users /[username]/.local/share/WSJT-X
Actually, under Linux it is in ~/.local/share/WSJT-X/*logs*
Have you tried raising the priority of WSJTX to real-time?
There's a great replacment for Task Manager called Process Hacker that give
complete control over processes and can remember across restarts.
https://processhacker.sourceforge.io
Mike W9MDB
On Friday, July 22, 2022 at 11:24:41
I'd appreciate if users could check their wsjtx_syslog.log file.
For Windows users it will be in C:\Users\[username]\Appdata\WSJT-X
For Linux users /[username]/.local/share/WSJT-X
Should look like this and have one warning possibly about dropped audio. If
you see any other warnings please report
d.com>>
> Cc: WSJT software development <mailto:wsjt-devel@lists.sourceforge.net>>
> Subject: Re: [wsjt-devel] RC2 Report on MacOS 10.14.6 Mojave - Q65_Sync
>
> Steve,
>
> I understand, but I can’t find the ~/Library/Preferences/ folder. If I
> search my Mac for it
John:
Please send your telephone number to me at kj9idave. (at). Charter. [dot].
Net. . Let’s try a phone call.
Very 73,
Dave
From: John Stengrevics
Reply-To: WSJT software development
Date: Saturday, March 6, 2021 at 10:24 AM
To: WSJT software development
Subject: Re: [wsjt-devel] RC2
> 73
> Dave KJ9I
>
> From: John Stengrevics
> Reply-To: WSJT software development
> Date: Saturday, March 6, 2021 at 10:05 AM
> To: Steven Franke
> Cc: WSJT software development
> Subject: Re: [wsjt-devel] RC2 Report on MacOS 10.14.6 Mojave - Q65_Sync
>
> Steve,
>
From: John Stengrevics
Reply-To: WSJT software development
Date: Saturday, March 6, 2021 at 10:05 AM
To: Steven Franke
Cc: WSJT software development
Subject: Re: [wsjt-devel] RC2 Report on MacOS 10.14.6 Mojave - Q65_Sync
Steve,
I understand, but I can’t find the ~/Library/Preferences
Steve,
I understand, but I can’t find the ~/Library/Preferences/ folder. If I search
my Mac for it, nothing comes up but “WSJT User Guide.” I don’t see it anywhere.
Sorry to be so clueless here.
John
WA1EAZ
> On Mar 6, 2021, at 10:54 AM, Steven Franke wrote:
>
> John,
>
> The file that B
John,
The file that Bill sent to you should be placed in the ~/Library/Preferences
folder. This is the folder that your existing WSJT-X.ini file is located in.
You should be able to open the ~/Library/Preferences folder and simply grab the
attachment that Bill sent and drag it into that folder
Hi Steve,
Thanks for that.
I have followed your suggestions. However, I don’t see ~/Library/Preferences/
under WSJT. (Bill had asked me to move a file that he sent
(wsjt_log_config.ini) there for debugging purposes.) Maybe move it to WSJT INI?
73,
John
WA1EAZ
> On Mar 6, 2021, at 10:27
John,
You can make the ~/Library folder visible in Finder with the following steps:
1. Open a Finder window.
2. Select your home directory in the left panel of the Finder window.
3. Select Show View Options under the “View” menu.
4. Check the “Show Library Folder” box.
Thereafter, your Library f
Dave,
Thanks for trying to help. But, I am ashamed to admit that none of that makes
any sense to me. Sorry.
John
WA1EAZ
> On Mar 6, 2021, at 9:56 AM, David Tiller wrote:
>
> John,
>
> ~/Library is usually a hidden directory in the finder. I made a symlink to it
> called 'libr' that I use
John,
~/Library is usually a hidden directory in the finder. I made a symlink to it
called 'libr' that I use to get to it via the finder. You can see the Library
directory in terminal, so if you want to cp the file from a terminal session,
you can.
To create a symbolic link, in terminal type:
Hi Bill,
I can’t find the ~/Library/Preferences/ directory in which to put the file.
Can you provide a bit more detail on how I can locate it? Sorry.
John
WA1EAZ
> On Mar 6, 2021, at 9:20 AM, Bill Somerville wrote:
>
> Hi John,
>
> so I can see what is happening put the attached file into
On 06/03/2021 14:24, David Schmocker wrote:
Good morning everyone
OS 10.14.6 here (Intel ).. I saw in 2.4.0rc2 installation
instructions we must uninstall then reinstall the drivers to the radio.
For my application, this is the USB-CODEC inside the K3S radio.. I am
currently trying to figure
driver Hoping it
fixes the (hang-on PTT) issue I also have
73,
Dave
From: John Stengrevics
Reply-To: WSJT software development
Date: Saturday, March 6, 2021 at 8:15 AM
To: WSJT software development
Subject: Re: [wsjt-devel] RC2 Report on MacOS 10.14.6 Mojave - Q65_Sync
Bill,
I have
Hi John,
so I can see what is happening put the attached file into the WSJT-X
configuration files directory (~/Library/Preferences/ on macOS), restart
WSJT-X, run a minimal test to demonstrate the issue, then quit WSJT-X
(do not turn off the rig until WSJT-X has exited). There will be a new
f
Bill,
I have CAT selected and it does connect when I click on Test.
John (G4KLA) had asked what driver I was using. I replied that the driver had
not changed. It has always been /dev/cu.usbserial-A503XYAO.
John
WA1EAZ
> On Mar 6, 2021, at 9:07 AM, Bill Somerville wrote:
>
> Hi John,
>
>
Hi John,
which option do you have checked for "Preferences->Radio->PTT Method"?
73
Bill
G4WJS.
On 06/03/2021 14:03, John Stengrevics wrote:
Hi Bill,
I just tried to use Q65 with “Cumulative" selected as you suggested.
However, the problem is still there as described below. I have to
shut
Hi Bill,
I just tried to use Q65 with “Cumulative" selected as you suggested. However,
the problem is still there as described below. I have to shut down my
transceiver (Elecraft K3S) to get it to stop transmitting.
Thanks,
John
WA1EAZ
> On Mar 6, 2021, at 8:44 AM, Bill Somerville wrote:
>
Hi John,
I am not sure as I have not investigated this issue yet. It is easy
enough to check, select "Cumulative" for the 2D spectrum display,
restart WSJT-X, and see if the iusse goes away.
73
Bill
G4WJS.
On 06/03/2021 13:25, John Stengrevics wrote:
Hi Bill,
Will this fix solve the proble
Hi Bill,
Will this fix solve the problem I reported yesterday with OS Big Sur? I’ll
repost below in case you didn’t see it.
Thanks,
John
WA1EAZ
Repost - some additions in red:
John & Joe,
I had been using the previous version successfully on a MacBook Pro (Intel not
M1) OS Big Sur 11.2.2
Hi Dave and Kevin,
we have finally tracked down the cause of this crash, thanks for your
patience it was not so easy to track down. It is repaired for the next
release, for now if you do not use of the Q65_Sync Wide Graph
synchronization plot the crash will be avoided. Note this is not a Mac
Hello all,
A second report that mirrors this one:WSJT-X 2.4.0rc2
OS 10.14.6, Mac Mini
Mode Q65,Waterfall Q65_ Sync selected and slow to let go of PTT line to K3S
radio (even after Tx period). (when I go into Radio Panel, the Test PTT Red
bar stays on, won't easily release).
Then
Hi All:
I tried submitting this earlier today, but it didn’t seem to make to the list.
Hence, a re-submission:
Just trying out RC2 on an iMac, MacOS version 10.14.6 Mojave.
Selection of “Q65_Sync” from dropdown box on the wide graph causes a crash as
soon as the application starts to TX. Sele
Hi All:
Just trying out RC2 on an iMac, MacOS version 10.14.6 Mojave.
Selection of “Q65_Sync” from dropdown box on the wide graph causes a crash as
soon as the application starts to TX. Selection of “Cumulative” (the default)
and TX/RX are normal.
Specific exception was "EXC_BAD_ACCESS (SIGSE
When rig is in split mode and you open Settings split mode is still on. Then
doing "Test CAT" turns split mode off regardless of Split Operation setting so
"Test PTT" doesn't test split mode.
Mike W9MDB
___
wsjt-devel mailing list
wsjt-devel@lists.sou
,
Roger (K7GXB)
From: Black Michael via wsjt-devel [mailto:wsjt-devel@lists.sourceforge.net]
Sent: Thursday, December 3, 2020 06:56
To: WSJT Software Development
Cc: Black Michael
Subject: [wsjt-devel] RC2 Audio loss
I've had several instances where I get no audio from WSJT-X at all...
I've had several instances where I get no audio from WSJT-X at alljust
about daily.I can toggle the playback audio device and it comes backor a
restart of WSJT-X works.So it appears that it is losing the connection to the
playback audio device without giving an error.
It's talking to VB
(2.2.0-rc2 )
With RC2 I have been having random(?) cases where the Decode button
hangs up highlighted in blue.
The wide graph is still active but there are no further decodes and GUI
inputs are unresponsive.
Requires closing and restarting WSJT-X to recover.
Most of there freezes have happened
FWIW ... Tx5 is not cleared just in case you have to resend an RR73 if
your QSO partnet did not receive it.
Neil, KN3ILZ
On 5/26/2020 6:28 AM, Alan Groups wrote:
Redundant QSO left over from previous session - using ESC key cleared
all fields except TX5. This cleared itself on a program resta
Redundant QSO left over from previous session - using ESC key cleared
all fields except TX5. This cleared itself on a program restart.
False decodes - rig left running for an hour or so with no antenna -
nothing seen.
With just a bit of coax to a switched dummy load and the antenna
disconne
Hi Georg,
as you say "Preferences" I assume you are using macOS. What o/s version
are you using please?
73
Bill
G4WJS.
On 25/05/2020 17:38, Georg Isenbürger wrote:
Joe et al,
while using „Configurations“ I was not able to get back into „Preferences“
anymore. Showed a menue similar to „Conf
Joe et al,
while using „Configurations“ I was not able to get back into „Preferences“
anymore. Showed a menue similar to „Configurations“.
73’s Georg
> Am 25.05.2020 um 18:17 schrieb Joe Taylor :
>
> Hi Jim,
>
> On 5/25/2020 3:04 AM, Jim Brown K9YC wrote:
>> Thanks VERY much for this one:
>>
Hi Jim,
On 5/25/2020 3:04 AM, Jim Brown K9YC wrote:
Thanks VERY much for this one:
"Hold Tx frequency no longer cleared when switching between modes."
We're halfway there -- TX frequency defaults to 1500 Hz when I've
returned from MSK144 to FT8. Is it possible to remember prior setting of
TX
Hi, in my view goalposts are fine with the white line beneath the RX one
and the waterfall background no longer quite black.
Window resize issue on turning menus off has gone.
Nothing else checked yet.
Alan G0TLK
___
wsjt-devel mailing list
wsjt-
Thanks VERY much for this one:
"Hold Tx frequency no longer cleared when switching between modes."
We're halfway there -- TX frequency defaults to 1500 Hz when I've
returned from MSK144 to FT8. Is it possible to remember prior setting of
TX frequency?
I think the goalpost markers are improved
Ah ... I need to review that manual again :(
On 10/9/2018 10:12 AM, Neil Zampella wrote:
As mentioned in the Quick Start guide, both boxes need to be checked
when testing 77bit mode. These are two different 'flags' or
'switches' as I believe the encoder & decoder are two separate
process
As mentioned in the Quick Start guide, both boxes need to be checked
when testing 77bit mode. These are two different 'flags' or 'switches'
as I believe the encoder & decoder are two separate processes. The
system has no capability to detect what you're responding to since the
legacy FT8 wi
thanks. I thnk I did not understand that section.
so message format to be sent, not message received will determine the tx
format.
thanks for clarifying.
On Tue, Oct 9, 2018 at 9:34 AM Joe Taylor wrote:
> On 10/8/2018 6:15 PM, Bill Pence KI4US wrote:
> > Ok. I tried some tests.
> > I do decode
On 10/8/2018 6:15 PM, Bill Pence KI4US wrote:
Ok. I tried some tests.
I do decode both 77 bit and old messages
I had a buddy send an old cq and 77 bit cq.
I decided both.
But I did not select the always generate 77 bit messages so I expected
to answer with the format I decoded. That was not t
we were on 14.078. I was just expecting, since there are 2 different
selection boxes, that if I decoded a new message I would reply with new
message, and if I decoded an
old message, I would reply with old message. otherwise, why are there
separate selections for TX and RX message format?
things o
Bill.
77 bit mode is only to be used for testing on the two frequencies as
listed in the v2.0 Quick Start guide. It should not be used on normal
FT8 frequencies, so worrying about answering legacy FT8 messages on the
testing frequencies, or 77 bit messages on the normal frequencies, is
no
Ok. I tried some tests.
I do decode both 77 bit and old messages
I had a buddy send an old cq and 77 bit cq.
I decided both.
But I did not select the always generate 77 bit messages so I expected to
answer with the format I decoded. That was not the case ???
Is this intended operation? I know f
Second this suggestion and also would like to be able to filter B4 contacts
Thanks 73Morris WA4MIT
On Wednesday, October 3, 2018, 8:49:08 PM CDT, DXer
wrote:
A returnee from JTDX.
RC2 has been great, no problems so far. Decoding is very good.
One request. In addition to the CQ only b
A returnee from JTDX.
RC2 has been great, no problems so far. Decoding is very good.
One request. In addition to the CQ only box, would it be possible to
also offer a 73/RR73 box that would add to the CQ only option?
Thanks and 73.
Vince, VA3VF
_
Leviathan got squished?
Robin, G8DQX, feeling rather tongue-in-cheek
On 10/09/17 14:43, Richard Shaw [hobbes1...@gmail.com] wrote:
I probably would have caught that if I hadn't gotten dropped from the
mailing list for the last few months... Still not sure what happened
there.
-
Thanks guys...
I probably would have caught that if I hadn't gotten dropped from the
mailing list for the last few months... Still not sure what happened there.
Thanks,
Richard
KF5OIM
--
Check out the vibrant tech communi
This can also be found by checking the release notes link right above
the download links on the WSJT-X homepage:
https://physics.princeton.edu/pulsar/k1jt/Release_Notes_1.8.0.txt
See you on the air.
Jim S.
N2ADV
On 9/10/2017 9:14 AM, char...@sucklingfamily.free-online.co.uk wrote:
Hi Richar
Hi Richard
Open frequency table, right click and then select Reset. All the default
frequencies should reappear.
Note that if you are a user of different Configurations, you will need to
do the same for each one.
73
Charlie G3WDG
> Ok, I had wondered why things were so quiet but apparently I
Ok, I had wondered why things were so quiet but apparently I got
unsubscribed somehow from the mailing list!
I just built RC2 for Fedora 26 using the superbuild method and when I start
it up it shows "40m" in the dropdown menu (last freq I worked) but when I
try to click on it there's nothing ther
On 03/09/2017 21:24, Pino Zollo wrote:
201930 -4 0.4 1393 ~ CQ RI1ANO GC07 S. Shetland Is.
Isn't it in Antarctica ?
Hi Pino,
have you checked where the S. Shetland Islands are? They are not off the
coast of Scotland, hi hi.
73
Bill
G4WJS.
---
https://en.wikipedia.org/wiki/Bellingshausen_Station
On Sun, Sep 3, 2017 at 11:44 PM, KQ5S-Tom wrote:
> No according to QRZ.COM:
>
> RI1ANO [image: South Shetland Islands flag] South Shetland Islands
> Alexandr A. Ushakov, UA1OJL
> Bellingshausen Base
> King George Island
> South Shetland Island
No according to QRZ.COM:
RI1ANO South Shetland Islands
Alexandr A. Ushakov, UA1OJL
Bellingshausen Base
King George Island
South Shetland Islands
-
Tom - KQ5S
> On Sep 3, 2017, at 3:24 PM, Pino Zollo wrote:
>
>
> 1.8 RC2
> 201930 -4 0.4 1393 ~ CQ RI1ANO GC07 S. Shetland Is.
>
> Isn't
1.8 RC2
201930 -4 0.4 1393 ~ CQ RI1ANO GC07 S. Shetland Is.
Isn't it in Antarctica ?
73 de
Pino ZP4KFX
--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm
Thanks Mike. Worked like a charm.
Ernie KC4SIT
On Sun, Sep 3, 2017 at 9:35 AM, Black Michael via wsjt-devel <
wsjt-devel@lists.sourceforge.net> wrote:
> This is an FAQ now...means you were using one of the other development
> version which had a bug.
>
> Settings/Frequencies right-click in Frequ
This is an FAQ now...means you were using one of the other development version
which had a bug.
Settings/Frequencies right-click in Frequencies and Reset.
de Mike W9MDB
On Sunday, September 3, 2017 8:31 AM, Ernie Hollingsworth
wrote:
I just updated WSJT-X to the rc2 build. Did not fin
I just updated WSJT-X to the rc2 build. Did not find any frequencies under
the Settings>Frequencies tab. Has anyone else experienced this issue?
Downloaded from Source Forge.Thanks
Ernie KC4SIT
--
Check out the vibrant tec
When I installed rc2, it just changed back to the default audio devices. I
simply had to go into the menu and reselect the USB Audio Device for the
7300 and it's been fine since.
On Sep 2, 2017 12:49 PM, "Pino Zollo" wrote:
> Hi,
>
> The new version does not recognize any more the "CODEC" audio
On 02/09/2017 17:47, Pino Zollo wrote:
The new version does not recognize any more the "CODEC" audio interface
as generated by the USB connection to the IC-7300.
Hi Pino,
no changes have been made that would cause that. Please try a system
restart and tell us if the issue persists.
73
Bill
Hi,
The new version does not recognize any more the "CODEC" audio interface
as generated by the USB connection to the IC-7300.
73
Pino ZP4KFX
--
Check out the vibrant tech community on one of the world's most
engagin
On 02/09/2017 15:41, Black Michael via wsjt-devel wrote:
Seems to me we need to detect this and provide a dialog to notify and
reset when no frequencies are loaded.
It would be super-nice if previous edits weren't lost but that's
probably asking too much.
Hi Mike,
this is a transitory issue
*From:* Scott Bidstrup
*To:* wsjt-devel@lists.sourceforge.net
*Sent:* Saturday, September 2, 2017 9:38 AM
*Subject:* [wsjt-devel] RC2 bug report
Gentlemen,
I have downloaded and installed the RC2 release software, and am
delighted to report that, for
On 9/2/2017 10:52 AM, Scott Bidstrup wrote:
I tried that, and only after several retries, including re-starting the
software twice, did that finally work - might still be a problem there
that will need looking into.
Or maybe you need to remember to click OK to dismiss the Settings page.
--
On 02/09/2017 15:37, Scott Bidstrup wrote:
I have downloaded and installed the RC2 release software, and am
delighted to report that, for the most part, it is working.
One problem I have noted, though, is that the drop-down frequency
list, in all modes, seems to be missing in the new version (
On 02/09/2017 08:41 a.m., Ulderico Arcidiaco wrote:
Scott,
Please read Joe's note below:
Depending on what code revision you upgrade from, it may be
necessary to do a one-time reset of the default list of suggested
operating frequencies. Go to *File->Settings->Frequencies*, right
click on the
Please read the RC2 announcement again. Carefully.
On 9/2/2017 10:37 AM, Scott Bidstrup wrote:
Gentlemen,
I have downloaded and installed the RC2 release software, and am
delighted to report that, for the most part, it is working.
One problem I have noted, though, is that the drop-down freq
Scott,
Please read Joe's note below:
> Depending on what code revision you upgrade from, it may be necessary to do a
> one-time reset of the default list of suggested operating frequencies. Go to
> *File->Settings->Frequencies*, right click on the table and select *Reset*.
73, Ulde
IK2TYL
>
To: wsjt-devel@lists.sourceforge.net
Sent: Saturday, September 2, 2017 9:38 AM
Subject: [wsjt-devel] RC2 bug report
Gentlemen,
I have downloaded and installed the RC2 release software, and am
delighted to report that, for the most part, it is working.
One problem I have noted, though, i
Gentlemen,
I have downloaded and installed the RC2 release software, and am
delighted to report that, for the most part, it is working.
One problem I have noted, though, is that the drop-down frequency list,
in all modes, seems to be missing in the new version (downloaded from
sourceforge) -
Just wondering about release of RC2 time frame? It has been awhile
since RC1 was released and there have been many advances in the program.
So many so, that it is kind of obvious when someone is using RC1, which
is noticeably "deaf" compared to recent revisions. Many of us are hoping
that a RC
This fixes the problem of JTSDK building the package and still ending up with
rc1.The old package wasn't being removed on build.
You don't have to "enable-clean" either. Still builds correctly with
"disable-clean".
de Mike W9MDB
==
I discovered a problem with the change to rc2 in JTSDK.
Apparently the "enable-clean" doesn't clean everything it should.
So it was still generating an rc1 on the package build.
I completely removed the JTSDK\src\wsjtx directory and it built correctly after
that.
I'll try and see if I can figure o
87 matches
Mail list logo
