mswlogo;543588 Wrote: 
> I never agreed 4 bits were free. In that test Volume 20 is a 4bit shift.
> If 4bits didn't lose detail you'd still have 96dB of dynamic range. But
> you get 76 dB. They attenuated 4bits and lost 4bits. I must have said
> that 6 times now.
> 
> Replay Gain is a slightly different deal and I'm rethinking using it
> myself in a unique way. If you have CD's that are way over compressed
> they are junk anyway and probably have no low level detail. So you
> can't make them much worse. Boosting them is fine in fact is good
> because if a CD has too much headroom it's the same argument that it's
> better to bring them up to full scale. As long as you don't clip them
> (significantly). However Replay Gain by default uses RMS Volume to
> decide not Peak Data. So you need to be careful it does not cause
> significant clipping. Minor occasional clipping is not a big deal.
> 
> I assume your premium albums have little or no replay gain. So it's up
> to you if want to use it. I personally won't ever attenuate with replay
> gain. But I might consider boosting with it. But that presents some
> other complex problems in Meridian land I'm not going into here. We
> have thread on that topic actually on Meridian Forum. Just one quick
> comment any time you change volume digitally you need to redither and
> I'm curious if that happens and who does it. Plugin or SqueezeBox.
> 
> I removed a 6dB digital attenuation from my system and I can hear the
> difference. I can't hear Meridian upsampling. I can't hear Merdian
> apodizing. I can't hear the difference between m...@320kps and flac. But
> I can hear the loss 6dB digitally does.
> 
> You can research Meridian spekaers on your own if you want. But
> effectively they are DAC, Preamp, and ANALOG amps all in one box. It's
> exactly the same as a conventional setup it's just they put it all in
> one box. They actually have 4 DAC channels and 4 amps in the box.
> Because they do crossover in digital domain. This allows amps to run
> 100% efficient compared to passive crossovers and avoid phase problems
> passive crossovers have.

Replaygain does not clip.


-- 
Phil Leigh

You want to see the signal path BEFORE it gets onto a CD/vinyl...it
ain't what you'd call minimal...
Touch(wired/XP) - TACT 2.2X (Linear PSU) + Good Vibrations S/W - MF
Triplethreat(Audiocom full mods) - Linn 5103 - Aktiv 5.1 system (6x
LK140's, ESPEK/TRIKAN/KATAN/SEIZMIK 10.5), Townsend Supertweeters, Blue
Jeans Digital,Kimber Speaker & Chord Interconnect cables
Kitchen Boom, Outdoors: SB Radio
------------------------------------------------------------------------
Phil Leigh's Profile: http://forums.slimdevices.com/member.php?userid=85
View this thread: http://forums.slimdevices.com/showthread.php?t=77725

_______________________________________________
audiophiles mailing list
audiophiles@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/audiophiles

Reply via email to