Re: Application.cfc racing
>From the LiveDocs (http://livedocs.macromedia.com/coldfusion/7/htmldocs/0696.htm) Use this method for application initialization code; for example, use it to set Application scope variables, to determine whether a required data source or other resource is available, or to log the application start. You do not have to lock the Application scope if you set Application variables in this method, and you can reference Application scope variables as you normally do; for example, as Application.myVariable. Same goes for the session according to the docs. On 5/23/06, Michael Dinowitz <[EMAIL PROTECTED]> wrote: > I'm about to do some tests on application.cfc as it deals with the > onApplicationStart and onSessionStart. The question is, if the > application/session does not exist, does the method 'lock' and single thread > the request to it or can multiple requests cause the start methods to run if > they happen at the same time. In an application.cfm this is handled by doing > a check to see if an application variable exists, if not lock the application > and then check again. > If no one has solid data on this then I'll be testing it out and posting the > results here and on Blog of Fusion. > > Michael Dinowitz > Host: House of Fusion > http://www.houseoffusion.com > Publisher: Fusion Authority > http://www.fusionauthority.com > > > ~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241193 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=11502.10531.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
Application.cfc racing
I'm about to do some tests on application.cfc as it deals with the onApplicationStart and onSessionStart. The question is, if the application/session does not exist, does the method 'lock' and single thread the request to it or can multiple requests cause the start methods to run if they happen at the same time. In an application.cfm this is handled by doing a check to see if an application variable exists, if not lock the application and then check again. If no one has solid data on this then I'll be testing it out and posting the results here and on Blog of Fusion. Michael Dinowitz Host: House of Fusion http://www.houseoffusion.com Publisher: Fusion Authority http://www.fusionauthority.com ~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241192 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=11502.10531.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
Re: Verity issues with MX 7
The verity core is different in what was shipped in 7 from the version shipped in 6. Verity version in 6.1 was about 4 I tyhink, and in MX7 the verity version is also 7. This means any collections created by your mx6.1 box wont work on 7 and will need to be recreated in the new verity format. Hope that helps. On 5/23/06, John Crawford <[EMAIL PROTECTED]> wrote: > My company recently upgraded a server from 6.1 to 7.0.1. After doing the > upgrade we discovered that our verity functionality has broken. The indexing > is taking roughly 50 times longer to complete, and once it does, it does not > seem that the collections have been created (the search results return > nothing). I know that due to all the new content in verity that the process > of indexing takes longer which may be one possible cause. In addition, our > system uses multiple collections and that could be another cause. You can > see an example of no results here: > > http://www.fortworthcpa.org/index.cfm?fuseaction=contentSearch.veritySearch&nodeID=1 > However, we have a client that uses our product on a third-party MX7 server, > and they have never experienced this issue. You can seen the correct results > here: > http://www.ovariancancer.org/index.cfm?fuseaction=contentSearch.veritySearch&nodeID=1 > So, we are not sure how to account for the situation that verity is > working with our system in one MX 7 environment but not in another. Any > thoughts? Also, as a temporary fix would it be possible to install the > verity (version 2.6.1) from 6.1 to work in conjunction with 7.0.1? > Thanks in advance, John > > > > > ~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241191 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
Re: confused on error
That "Record is Deleted" message can be an indication that you have a corrupt database. I would close all connections to the db, make a backup copy, then do a compact and repair. -- Jim Wright Wright Business Solutions [EMAIL PROTECTED] 919-417-2257 ~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241190 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=11502.10531.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
Re: Suggestion for the mods...RE: what does application.home point to?
but if they're all in the cf-talk folder...why the need for any additional visual cues? :) On 5/22/06, Eric Roberts <[EMAIL PROTECTED]> wrote: > That is how I am doing it now...it just makes it easier to have something in > the subject for visual purposes. > > Eric > > -Original Message- > From: Everett, Al (NIH/NIGMS) [C] [mailto:[EMAIL PROTECTED] > Sent: Monday, 22 May 2006 09:26 > To: CF-Talk > Subject: RE: Suggestion for the mods...RE: what does application.home point > to? > > I sort ALL of my mailing lists into separate folders (or, in Gmail, labels). -- Charlie Griefer "...All the world shall be your enemy, Prince with a Thousand Enemies, and whenever they catch you, they will kill you. But first they must catch you, digger, listener, runner, prince with a swift warning. Be cunning and full of tricks and your people shall never be destroyed." ~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241189 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
RE: Javascript image reorder package
Try dynamicdrive.com Eric -Original Message- From: Philip K. Dunn [mailto:[EMAIL PROTECTED] Sent: Monday, 22 May 2006 12:08 To: CF-Talk Subject: Javascript image reorder package Anyone know of a javascript package available to re-order images on-screen? ~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241188 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=11502.10531.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
RE: confused on error
> Error Executing Database Query. > [Macromedia][SequeLink JDBC Driver][ODBC > Socket][Microsoft][ODBC Microsoft Access Driver] Record is deleted. > > 1 : > 2 : select * > 3 : from RETURN_AUTHORIZATION > > SQLselect * from RETURN_AUTHORIZATION > DATASOURCE returns_version1 > VENDORERRORCODE -1017 > SQLSTATE HY109 My guess is that this is some sort of Access concurrency error. I would recommend that you stop the SequeLink services, see what happens when you open the Access database in Access, and restart the SequeLink services. Dave Watts, CTO, Fig Leaf Software http://www.figleaf.com/ Fig Leaf Software provides the highest caliber vendor-authorized instruction at our training centers in Washington DC, Atlanta, Chicago, Baltimore, Northern Virginia, or on-site at your location. Visit http://training.figleaf.com/ for more information! ~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241187 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
RE: Suggestion for the mods...RE: what does application.home point to?
That is how I am doing it now...it just makes it easier to have something in the subject for visual purposes. Eric -Original Message- From: Everett, Al (NIH/NIGMS) [C] [mailto:[EMAIL PROTECTED] Sent: Monday, 22 May 2006 09:26 To: CF-Talk Subject: RE: Suggestion for the mods...RE: what does application.home point to? I sort ALL of my mailing lists into separate folders (or, in Gmail, labels). If I didn't, my inbox would be overwhelmed by it. I usually read mailing list mail during my down times. Anything that's in my inbox was sent directly to me and I usually need to act on it relatively soon. My Outlook rule keys on the To: field being cf-talk@houseoffusion.com and moves it to my CF-Talk folder. -Original Message- From: Eric Roberts [mailto:[EMAIL PROTECTED] Sent: Friday, May 19, 2006 11:25 PM To: CF-Talk Subject: RE: Suggestion for the mods...RE: what does application.home point to? The problem lies in that I look at the listing of unread mail and it looks like spam Eric -Original Message- From: Charlie Griefer [mailto:[EMAIL PROTECTED] Sent: Friday, 19 May 2006 13:02 To: CF-Talk Subject: Re: Suggestion for the mods...RE: what does application.home point to? couldn't you just filter on where reply-to is cf-talk@houseoffusion.com ? On 5/19/06, Eric Roberts <[EMAIL PROTECTED]> wrote: > I left the original subject line it tact to show what I am referring to... > > Would it be possible to add something to all of the subjects, > programmatically, to show where the mail is coming from? A good > feature that the Yahoo lists have, for instance if this were a Yahoo > group, would add [CF-Talk] to the beginning of the subject line. If > something like this could be done, it would help differentiate the > real email from spam. I accidentally marked as spam a couple of > emails from this list that had the above subject line as I have been getting spam that had a similar format. > It would also help outlook users and others who have similar mail > rules in their email clients to redirect mail from this list into a > folder. It helps the mail to stick out from the sea of spam I get > every day. Thanks for taking a look at this and for considering my idea! > > Blessings, > Eric Roberts > Owner/CF Developer > Three Ravens Consulting > http://www.threeravensconsulting.com > ~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241186 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=11502.10531.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
Re: confused on error
ah sorry, my bad. i read your examples backwards. SQLSTATE HY109 refers to an invalid cursor. Is this just a straightforward select statement from a basic database table or is there more going on behind the scenes (like a cursor)? On 5/22/06, Joe Velez <[EMAIL PROTECTED]> wrote: > to answer your q, ID is a # (auto inc) ... but I'm using Access database. > (yea lets not get into WHY) > > anyways .. > the error is not occuring because of the WHERE portion. that actually works > perfect! > however, a simple "select * from TABLE" statement is causing an error. > > Strange, huh? > > > > - Original Message - > From: "Charlie Griefer" <[EMAIL PROTECTED]> > To: "CF-Talk" > Sent: Monday, May 22, 2006 5:04 PM > Subject: Re: confused on error > > > > is ID a numeric datatype or a string? if it's a string you'll need > > single quotes around '#id#' (or better yet, a ) > > > > On 5/22/06, joe velez <[EMAIL PROTECTED]> wrote: > > > Hey - I am looking at this error and spinning my wheels trying to figure > out WHY I'm getting it. If I add a WHERE statement to the query below it > works fine, so why not a simple "select * from table" ?? > > > > > > Any ideas? I can't find any information online. > > > > > > Server: > > > CFMX6.1 > > > ACCESS DB > > > > > > Thanks > > > > > > JV > > > > > > > > > ==error= > > > Error Executing Database Query. > > > [Macromedia][SequeLink JDBC Driver][ODBC Socket][Microsoft][ODBC > Microsoft Access Driver] Record is deleted. > > > > > > 1 : > > > 2 : select * > > > 3 : from RETURN_AUTHORIZATION > > > > > > SQLselect * from RETURN_AUTHORIZATION > > > DATASOURCE returns_version1 > > > VENDORERRORCODE -1017 > > > SQLSTATE HY109 > > > > > > =end_error > > > > > > > > > THROWS ERROR > > > > > > select * > > > from RETURN_AUTHORIZATION > > > > > > > > > WORKS FINE > > > > > > select * > > > from RETURN_AUTHORIZATION > > > WHERE id = #id# > > > > > > > > > > > > > > > ~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241185 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
Verity issues with MX 7
My company recently upgraded a server from 6.1 to 7.0.1. After doing the upgrade we discovered that our verity functionality has broken. The indexing is taking roughly 50 times longer to complete, and once it does, it does not seem that the collections have been created (the search results return nothing). I know that due to all the new content in verity that the process of indexing takes longer which may be one possible cause. In addition, our system uses multiple collections and that could be another cause. You can see an example of no results here: http://www.fortworthcpa.org/index.cfm?fuseaction=contentSearch.veritySearch&nodeID=1 However, we have a client that uses our product on a third-party MX7 server, and they have never experienced this issue. You can seen the correct results here: http://www.ovariancancer.org/index.cfm?fuseaction=contentSearch.veritySearch&nodeID=1 So, we are not sure how to account for the situation that verity is working with our system in one MX 7 environment but not in another. Any thoughts? Also, as a temporary fix would it be possible to install the verity (version 2.6.1) from 6.1 to work in conjunction with 7.0.1? Thanks in advance, John ~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241184 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=11502.10531.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
Re: confused on error
to answer your q, ID is a # (auto inc) ... but I'm using Access database. (yea lets not get into WHY) anyways .. the error is not occuring because of the WHERE portion. that actually works perfect! however, a simple "select * from TABLE" statement is causing an error. Strange, huh? - Original Message - From: "Charlie Griefer" <[EMAIL PROTECTED]> To: "CF-Talk" Sent: Monday, May 22, 2006 5:04 PM Subject: Re: confused on error > is ID a numeric datatype or a string? if it's a string you'll need > single quotes around '#id#' (or better yet, a ) > > On 5/22/06, joe velez <[EMAIL PROTECTED]> wrote: > > Hey - I am looking at this error and spinning my wheels trying to figure out WHY I'm getting it. If I add a WHERE statement to the query below it works fine, so why not a simple "select * from table" ?? > > > > Any ideas? I can't find any information online. > > > > Server: > > CFMX6.1 > > ACCESS DB > > > > Thanks > > > > JV > > > > > > ==error= > > Error Executing Database Query. > > [Macromedia][SequeLink JDBC Driver][ODBC Socket][Microsoft][ODBC Microsoft Access Driver] Record is deleted. > > > > 1 : > > 2 : select * > > 3 : from RETURN_AUTHORIZATION > > > > SQLselect * from RETURN_AUTHORIZATION > > DATASOURCE returns_version1 > > VENDORERRORCODE -1017 > > SQLSTATE HY109 > > > > =end_error > > > > > > THROWS ERROR > > > > select * > > from RETURN_AUTHORIZATION > > > > > > WORKS FINE > > > > select * > > from RETURN_AUTHORIZATION > > WHERE id = #id# > > > > > > > > ~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241183 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=11502.10531.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
Re: confused on error
is ID a numeric datatype or a string? if it's a string you'll need single quotes around '#id#' (or better yet, a ) On 5/22/06, joe velez <[EMAIL PROTECTED]> wrote: > Hey - I am looking at this error and spinning my wheels trying to figure out > WHY I'm getting it. If I add a WHERE statement to the query below it works > fine, so why not a simple "select * from table" ?? > > Any ideas? I can't find any information online. > > Server: > CFMX6.1 > ACCESS DB > > Thanks > > JV > > > ==error= > Error Executing Database Query. > [Macromedia][SequeLink JDBC Driver][ODBC Socket][Microsoft][ODBC Microsoft > Access Driver] Record is deleted. > > 1 : > 2 : select * > 3 : from RETURN_AUTHORIZATION > > SQLselect * from RETURN_AUTHORIZATION > DATASOURCE returns_version1 > VENDORERRORCODE -1017 > SQLSTATE HY109 > > =end_error > > > THROWS ERROR > > select * > from RETURN_AUTHORIZATION > > > WORKS FINE > > select * > from RETURN_AUTHORIZATION > WHERE id = #id# > > > ~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241182 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
confused on error
Hey - I am looking at this error and spinning my wheels trying to figure out WHY I'm getting it. If I add a WHERE statement to the query below it works fine, so why not a simple "select * from table" ?? Any ideas? I can't find any information online. Server: CFMX6.1 ACCESS DB Thanks JV ==error= Error Executing Database Query. [Macromedia][SequeLink JDBC Driver][ODBC Socket][Microsoft][ODBC Microsoft Access Driver] Record is deleted. 1 : 2 : select * 3 : from RETURN_AUTHORIZATION SQLselect * from RETURN_AUTHORIZATION DATASOURCE returns_version1 VENDORERRORCODE -1017 SQLSTATE HY109 =end_error THROWS ERROR select * from RETURN_AUTHORIZATION WORKS FINE select * from RETURN_AUTHORIZATION WHERE id = #id# ~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241181 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=11502.10531.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
Re: Announcing SeeFusion 3.3
Hi Jordan. From what we know of Server JX from our discussions with New Atlanta, SeeFusion should work fine on that edition of BlueDragon. As far as we know, it will NOT work on BlueDragon Server (which apparently is built on an older version of ServletExec under the covers; one that doesn't support servlet filters). Hope that helps. Best, Patrick >Hi Patrick, > >Does SeeFusion support BlueDragon Server JX? We are looking for >something like this at the moment that supports BD JX. > >Thanks! > >Warm regards, >Jordan Michaels >Vivio Technologies > > > >Patrick Quinn wrote: > >> ~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241180 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
RE: Server Backup Solutions
I have heard a lot of people rave about backup for workgroups. Snake ~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241179 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=11502.10531.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
RE: MaxHeapSize + MaxPermSize
Well I spose I should of added, on a non enterprise license then :-) Multiple instances is the method that I have used thus far. Snake -Original Message- From: Dave Watts [mailto:[EMAIL PROTECTED] Sent: 22 May 2006 20:29 To: CF-Talk Subject: RE: MaxHeapSize + MaxPermSize > > I have to wonder what one does if they have a CF server that > > requires more than 1.8gb RAM for the JVM, > > Multiple Instances and clustering. If you're using multiple instances, each has its own JVM and memory space. One of the reasons for using multiple instances is to bypass the JVM memory limitations of a single instance. Dave Watts, CTO, Fig Leaf Software http://www.figleaf.com/ Fig Leaf Software provides the highest caliber vendor-authorized instruction at our training centers in Washington DC, Atlanta, Chicago, Baltimore, Northern Virginia, or on-site at your location. Visit http://training.figleaf.com/ for more information! ~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241178 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=11502.10531.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
RE: Server Backup Solutions
Backup4All looks good...very similar to SyncBackSE...I'm just waiting for one of these vendors to offer block-level differential backup. Now *that* will be terrific! Rick -Original Message- From: Mike Klostermeyer [mailto:[EMAIL PROTECTED] Sent: Monday, May 22, 2006 5:15 PM To: CF-Talk Subject: RE: Server Backup Solutions Thanks, everyone. I'll add to the list one that I just found: http://www.backup4all.com/. Seems to cover most of my needs, all for $45. I'll check this one out as well. Mike -Original Message- From: Rick Faircloth [mailto:[EMAIL PROTECTED] Sent: Monday, May 22, 2006 4:03 PM To: CF-Talk Subject: RE: Server Backup Solutions Try www.2brightsparks.comSyncBackSE $20 or so...I run backup services for some of my customers to an FTP here at my studio. Works like a charm...and it's VERY inexpensive... Rick -Original Message- From: Emmet McGovern [mailto:[EMAIL PROTECTED] Sent: Monday, May 22, 2006 4:15 PM To: CF-Talk Subject: RE: Server Backup Solutions Both http://www.acronis.com and http://www.ultrabac.com offer great products. We use both. Not sure what price range you're looking for. $699 to $999 per server is a great price to pay if you ever need to put your disaster recovery plan to work. -e -Original Message- From: Mike Klostermeyer [mailto:[EMAIL PROTECTED] Sent: Monday, May 22, 2006 3:58 PM To: CF-Talk Subject: RE: Server Backup Solutions Thanks. Now thinking about it, an ideal solution would be able to manage, say, a weeks worth of daily backups, on a rotating basis. Any other ideas? Mike -Original Message- From: Adkins, Randy [mailto:[EMAIL PROTECTED] Sent: Monday, May 22, 2006 2:15 PM To: CF-Talk Subject: RE: Server Backup Solutions I use the standard NT Backup that comes with Windows. I made sure my drive mappings were setup and then scheduled Backups from that to a tape. Now ideally would be awesome to have the auto-tape changer System. I have seen it before but the project I am on, well Lets say we do with what we have or what we can scrounge for. -Original Message- From: Mike Klostermeyer [mailto:[EMAIL PROTECTED] Sent: Monday, May 22, 2006 3:07 PM To: CF-Talk Subject: OT: Server Backup Solutions Curious if anyone has some suggestions for server backup software. I need to backup (probably to a separate drive cage) web servers and database servers in a Microsoft environment, and looking for any input or experiences. I don't need much, but some requirements are to be able to put backup process on a scheduler, compression, and obviously, the cheaper the better. Thanks. Mike ~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241177 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=11502.10531.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
Re: Server Backup Solutions
At my last job, we started backing up to a rotating pair of USB 2.0 external HD's. It worked perfectly. We would switch them out on Monday AM, with last weeks going off-site and the other one coming in. The backups were done with Ghost and they were so handy! We'd have one new image for every day and you could use them as a whole image or get into them to pick and choose. We even had to use them once for a full restore and a couple of times for partials or for the odd file or folder restore and it was the coolest backup solution. Easy, reliable, fast... I really liked it. --Ferg > -Original Message- > From: Mike Klostermeyer [mailto:[EMAIL PROTECTED] > Sent: Monday, May 22, 2006 3:58 PM > To: CF-Talk > Subject: RE: Server Backup Solutions > > Thanks. Now thinking about it, an ideal solution would be able to manage, > say, a weeks worth of daily backups, on a rotating basis. Any other ideas? > > Mike > > -Original Message- > From: Adkins, Randy [mailto:[EMAIL PROTECTED] > Sent: Monday, May 22, 2006 2:15 PM > To: CF-Talk > Subject: RE: Server Backup Solutions > > > I use the standard NT Backup that comes with Windows. > I made sure my drive mappings were setup and then scheduled > Backups from that to a tape. > > Now ideally would be awesome to have the auto-tape changer > System. I have seen it before but the project I am on, well > Lets say we do with what we have or what we can scrounge for. > > > > > -Original Message- > From: Mike Klostermeyer [mailto:[EMAIL PROTECTED] > Sent: Monday, May 22, 2006 3:07 PM > To: CF-Talk > Subject: OT: Server Backup Solutions > > Curious if anyone has some suggestions for server backup software. I > need to backup (probably to a separate drive cage) web servers and > database servers in a Microsoft environment, and looking for any input > or experiences. I don't need much, but some requirements are to be able > to put backup process on a scheduler, compression, and obviously, the > cheaper the better. Thanks. > > Mike > > > > > > > > > > > > ~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241176 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
RE: Server Backup Solutions
Thanks, everyone. I'll add to the list one that I just found: http://www.backup4all.com/. Seems to cover most of my needs, all for $45. I'll check this one out as well. Mike -Original Message- From: Rick Faircloth [mailto:[EMAIL PROTECTED] Sent: Monday, May 22, 2006 4:03 PM To: CF-Talk Subject: RE: Server Backup Solutions Try www.2brightsparks.comSyncBackSE $20 or so...I run backup services for some of my customers to an FTP here at my studio. Works like a charm...and it's VERY inexpensive... Rick -Original Message- From: Emmet McGovern [mailto:[EMAIL PROTECTED] Sent: Monday, May 22, 2006 4:15 PM To: CF-Talk Subject: RE: Server Backup Solutions Both http://www.acronis.com and http://www.ultrabac.com offer great products. We use both. Not sure what price range you're looking for. $699 to $999 per server is a great price to pay if you ever need to put your disaster recovery plan to work. -e -Original Message- From: Mike Klostermeyer [mailto:[EMAIL PROTECTED] Sent: Monday, May 22, 2006 3:58 PM To: CF-Talk Subject: RE: Server Backup Solutions Thanks. Now thinking about it, an ideal solution would be able to manage, say, a weeks worth of daily backups, on a rotating basis. Any other ideas? Mike -Original Message- From: Adkins, Randy [mailto:[EMAIL PROTECTED] Sent: Monday, May 22, 2006 2:15 PM To: CF-Talk Subject: RE: Server Backup Solutions I use the standard NT Backup that comes with Windows. I made sure my drive mappings were setup and then scheduled Backups from that to a tape. Now ideally would be awesome to have the auto-tape changer System. I have seen it before but the project I am on, well Lets say we do with what we have or what we can scrounge for. -Original Message- From: Mike Klostermeyer [mailto:[EMAIL PROTECTED] Sent: Monday, May 22, 2006 3:07 PM To: CF-Talk Subject: OT: Server Backup Solutions Curious if anyone has some suggestions for server backup software. I need to backup (probably to a separate drive cage) web servers and database servers in a Microsoft environment, and looking for any input or experiences. I don't need much, but some requirements are to be able to put backup process on a scheduler, compression, and obviously, the cheaper the better. Thanks. Mike ~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241175 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
RE: Google Analytics?
Found the problem. I had the wrong SSL URL. Doh! Thanks for everyone's help. Mike -Original Message- From: Nick Tong - TalkWebSolutions.co.uk [mailto:[EMAIL PROTECTED] Sent: Monday, May 22, 2006 3:36 PM To: CF-Talk Subject: Re: Google Analytics? Mike, Did you check out my post? Aldon, . it can be slower but be sure to put the script at the end of you page - just before the tag. HTH On 22/05/06, Aldon <[EMAIL PROTECTED]> wrote: > I have found Google Analytics to increase load time making my pages slower. > Has anyone found a solution to this? > > Al > > > -Original Message- > From: Paul [mailto:[EMAIL PROTECTED] > Sent: Monday, May 22, 2006 12:10 PM > To: CF-Talk > Subject: RE: Google Analytics? > > This must no longer be true; I just set up Analytics last month on our SSL > site and after searching their online help for "SSL" and following the > instructions, all is working well. > > -Original Message- > From: Dave Watts [mailto:[EMAIL PROTECTED] > Sent: Monday, May 22, 2006 7:37 AM > To: CF-Talk > Subject: RE: Google Analytics? > > > Since it appears many here use Google Analytics, I have a > > question. Does anyone use it over an SSL connection (during > > the checkout process of a cart, for example)? I can't figure > > out how to use it without throwing browser security warnings > > (domain name does not match, etc.). Any way around this? > > Unfortunately, the SSL portion of Google Analytics is slightly broken. They > have SSL set up so that you can fetch their files, but their certificate > doesn't match the URL used to fetch the files. > > > > > > ~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241174 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
RE: Server Backup Solutions
Try www.2brightsparks.comSyncBackSE $20 or so...I run backup services for some of my customers to an FTP here at my studio. Works like a charm...and it's VERY inexpensive... Rick -Original Message- From: Emmet McGovern [mailto:[EMAIL PROTECTED] Sent: Monday, May 22, 2006 4:15 PM To: CF-Talk Subject: RE: Server Backup Solutions Both http://www.acronis.com and http://www.ultrabac.com offer great products. We use both. Not sure what price range you're looking for. $699 to $999 per server is a great price to pay if you ever need to put your disaster recovery plan to work. -e -Original Message- From: Mike Klostermeyer [mailto:[EMAIL PROTECTED] Sent: Monday, May 22, 2006 3:58 PM To: CF-Talk Subject: RE: Server Backup Solutions Thanks. Now thinking about it, an ideal solution would be able to manage, say, a weeks worth of daily backups, on a rotating basis. Any other ideas? Mike -Original Message- From: Adkins, Randy [mailto:[EMAIL PROTECTED] Sent: Monday, May 22, 2006 2:15 PM To: CF-Talk Subject: RE: Server Backup Solutions I use the standard NT Backup that comes with Windows. I made sure my drive mappings were setup and then scheduled Backups from that to a tape. Now ideally would be awesome to have the auto-tape changer System. I have seen it before but the project I am on, well Lets say we do with what we have or what we can scrounge for. -Original Message- From: Mike Klostermeyer [mailto:[EMAIL PROTECTED] Sent: Monday, May 22, 2006 3:07 PM To: CF-Talk Subject: OT: Server Backup Solutions Curious if anyone has some suggestions for server backup software. I need to backup (probably to a separate drive cage) web servers and database servers in a Microsoft environment, and looking for any input or experiences. I don't need much, but some requirements are to be able to put backup process on a scheduler, compression, and obviously, the cheaper the better. Thanks. Mike ~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241173 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
Re: Server Backup Solutions
Rotation of backups can easily be done with Windows scripting or batch files. I do this with my personal computers at home, backing up to an NAS on my network. I use the Windows scheduler to run the backup batch file each night. The batch file fires NTBackup, setting a destination backup filename (incorporating the date). I do a weekly full backup, then incremental daily backups. - Original Message - From: "Mike Klostermeyer" <[EMAIL PROTECTED]> To: "CF-Talk" Sent: Monday, May 22, 2006 1:58 PM Subject: RE: Server Backup Solutions > Thanks. Now thinking about it, an ideal solution would be able to > manage, > say, a weeks worth of daily backups, on a rotating basis. Any other > ideas? > > Mike > > -Original Message- > From: Adkins, Randy [mailto:[EMAIL PROTECTED] > Sent: Monday, May 22, 2006 2:15 PM > To: CF-Talk > Subject: RE: Server Backup Solutions > > > I use the standard NT Backup that comes with Windows. > I made sure my drive mappings were setup and then scheduled > Backups from that to a tape. > > Now ideally would be awesome to have the auto-tape changer > System. I have seen it before but the project I am on, well > Lets say we do with what we have or what we can scrounge for. > > > > > -Original Message- > From: Mike Klostermeyer [mailto:[EMAIL PROTECTED] > Sent: Monday, May 22, 2006 3:07 PM > To: CF-Talk > Subject: OT: Server Backup Solutions > > Curious if anyone has some suggestions for server backup software. I > need to backup (probably to a separate drive cage) web servers and > database servers in a Microsoft environment, and looking for any input > or experiences. I don't need much, but some requirements are to be able > to put backup process on a scheduler, compression, and obviously, the > cheaper the better. Thanks. > > Mike > > > > > > > > ~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241172 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
Re: Google Analytics?
Mike, Did you check out my post? Aldon, . it can be slower but be sure to put the script at the end of you page - just before the tag. HTH On 22/05/06, Aldon <[EMAIL PROTECTED]> wrote: > I have found Google Analytics to increase load time making my pages slower. > Has anyone found a solution to this? > > Al > > > -Original Message- > From: Paul [mailto:[EMAIL PROTECTED] > Sent: Monday, May 22, 2006 12:10 PM > To: CF-Talk > Subject: RE: Google Analytics? > > This must no longer be true; I just set up Analytics last month on our SSL > site and after searching their online help for "SSL" and following the > instructions, all is working well. > > -Original Message- > From: Dave Watts [mailto:[EMAIL PROTECTED] > Sent: Monday, May 22, 2006 7:37 AM > To: CF-Talk > Subject: RE: Google Analytics? > > > Since it appears many here use Google Analytics, I have a > > question. Does anyone use it over an SSL connection (during > > the checkout process of a cart, for example)? I can't figure > > out how to use it without throwing browser security warnings > > (domain name does not match, etc.). Any way around this? > > Unfortunately, the SSL portion of Google Analytics is slightly broken. They > have SSL set up so that you can fetch their files, but their certificate > doesn't match the URL used to fetch the files. > > > > > > ~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241171 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
RE: Server Backup Solutions
Both http://www.acronis.com and http://www.ultrabac.com offer great products. We use both. Not sure what price range you're looking for. $699 to $999 per server is a great price to pay if you ever need to put your disaster recovery plan to work. -e -Original Message- From: Mike Klostermeyer [mailto:[EMAIL PROTECTED] Sent: Monday, May 22, 2006 3:58 PM To: CF-Talk Subject: RE: Server Backup Solutions Thanks. Now thinking about it, an ideal solution would be able to manage, say, a weeks worth of daily backups, on a rotating basis. Any other ideas? Mike -Original Message- From: Adkins, Randy [mailto:[EMAIL PROTECTED] Sent: Monday, May 22, 2006 2:15 PM To: CF-Talk Subject: RE: Server Backup Solutions I use the standard NT Backup that comes with Windows. I made sure my drive mappings were setup and then scheduled Backups from that to a tape. Now ideally would be awesome to have the auto-tape changer System. I have seen it before but the project I am on, well Lets say we do with what we have or what we can scrounge for. -Original Message- From: Mike Klostermeyer [mailto:[EMAIL PROTECTED] Sent: Monday, May 22, 2006 3:07 PM To: CF-Talk Subject: OT: Server Backup Solutions Curious if anyone has some suggestions for server backup software. I need to backup (probably to a separate drive cage) web servers and database servers in a Microsoft environment, and looking for any input or experiences. I don't need much, but some requirements are to be able to put backup process on a scheduler, compression, and obviously, the cheaper the better. Thanks. Mike ~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241170 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
Re: Server Backup Solutions
For years I have been backing up to hard drives on the data server (NT/SQLS7) and then distributing those files (.bak) to other servers using scheduled ftp or PCAnywhere sessions. I maintain a 4 day rotation in different directories. I am not as diligent with transaction files only maintaining 2 hour backups for a day on an independant hard drive. I roll off data onto DVD every 4 days. Phil - Original Message - From: "Mike Klostermeyer" <[EMAIL PROTECTED]> To: "CF-Talk" Sent: Monday, May 22, 2006 2:58 PM Subject: RE: Server Backup Solutions | Thanks. Now thinking about it, an ideal solution would be able to manage, | say, a weeks worth of daily backups, on a rotating basis. Any other ideas? | | Mike | | -Original Message- | From: Adkins, Randy [mailto:[EMAIL PROTECTED] | Sent: Monday, May 22, 2006 2:15 PM | To: CF-Talk | Subject: RE: Server Backup Solutions | | | I use the standard NT Backup that comes with Windows. | I made sure my drive mappings were setup and then scheduled | Backups from that to a tape. | | Now ideally would be awesome to have the auto-tape changer | System. I have seen it before but the project I am on, well | Lets say we do with what we have or what we can scrounge for. | | | | | -Original Message- | From: Mike Klostermeyer [mailto:[EMAIL PROTECTED] | Sent: Monday, May 22, 2006 3:07 PM | To: CF-Talk | Subject: OT: Server Backup Solutions | | Curious if anyone has some suggestions for server backup software. I | need to backup (probably to a separate drive cage) web servers and | database servers in a Microsoft environment, and looking for any input | or experiences. I don't need much, but some requirements are to be able | to put backup process on a scheduler, compression, and obviously, the | cheaper the better. Thanks. | | Mike | | | | | | | | ~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241169 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
RE: QQ: What's the least intensive way to...
Thank you! My solution was much more convuluted. -Original Message- From: Charlie Griefer [mailto:[EMAIL PROTECTED] Sent: Monday, May 22, 2006 4:13 PM To: CF-Talk Subject: Re: QQ: What's the least intensive way to... On 5/22/06, Che Vilnonis <[EMAIL PROTECTED]> wrote: > What's the least intensive way to.. get the first 3 octets of any ip > address? > > Che Vilnonis > Application Developer > Advertising Systems Incorporated > 8470C Remington Avenue > Pennsauken, NJ 08110 > p: 856.488.2211 > f: 856.488.1990 > www.asitv.com > > > ~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241168 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
Re: QQ: What's the least intensive way to...
On 5/22/06, Che Vilnonis <[EMAIL PROTECTED]> wrote: > What's the least intensive way to.. get the first 3 octets of any ip > address? > > Che Vilnonis > Application Developer > Advertising Systems Incorporated > 8470C Remington Avenue > Pennsauken, NJ 08110 > p: 856.488.2211 > f: 856.488.1990 > www.asitv.com > > > ~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241167 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=11502.10531.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
QQ: What's the least intensive way to...
What's the least intensive way to.. get the first 3 octets of any ip address? Che Vilnonis Application Developer Advertising Systems Incorporated 8470C Remington Avenue Pennsauken, NJ 08110 p: 856.488.2211 f: 856.488.1990 www.asitv.com ~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241166 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
RE: Server Backup Solutions
Thanks. Now thinking about it, an ideal solution would be able to manage, say, a weeks worth of daily backups, on a rotating basis. Any other ideas? Mike -Original Message- From: Adkins, Randy [mailto:[EMAIL PROTECTED] Sent: Monday, May 22, 2006 2:15 PM To: CF-Talk Subject: RE: Server Backup Solutions I use the standard NT Backup that comes with Windows. I made sure my drive mappings were setup and then scheduled Backups from that to a tape. Now ideally would be awesome to have the auto-tape changer System. I have seen it before but the project I am on, well Lets say we do with what we have or what we can scrounge for. -Original Message- From: Mike Klostermeyer [mailto:[EMAIL PROTECTED] Sent: Monday, May 22, 2006 3:07 PM To: CF-Talk Subject: OT: Server Backup Solutions Curious if anyone has some suggestions for server backup software. I need to backup (probably to a separate drive cage) web servers and database servers in a Microsoft environment, and looking for any input or experiences. I don't need much, but some requirements are to be able to put backup process on a scheduler, compression, and obviously, the cheaper the better. Thanks. Mike ~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241165 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
Re: MaxHeapSize + MaxPermSize
exactly what I was thinking. Add in a couple more instances and cluster them up, eh? DK On 5/22/06, Dave Watts <[EMAIL PROTECTED]> wrote: > > > I have to wonder what one does if they have a CF server that > > > requires more than 1.8gb RAM for the JVM, > > > > Multiple Instances and clustering. > > If you're using multiple instances, each has its own JVM and memory space. > One of the reasons for using multiple instances is to bypass the JVM memory > limitations of a single instance. > > Dave Watts, CTO, Fig Leaf Software > http://www.figleaf.com/ > > Fig Leaf Software provides the highest caliber vendor-authorized > instruction at our training centers in Washington DC, Atlanta, > Chicago, Baltimore, Northern Virginia, or on-site at your location. > Visit http://training.figleaf.com/ for more information! > > > ~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241164 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=11502.10531.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
RE: MaxHeapSize + MaxPermSize
> > I have to wonder what one does if they have a CF server that > > requires more than 1.8gb RAM for the JVM, > > Multiple Instances and clustering. If you're using multiple instances, each has its own JVM and memory space. One of the reasons for using multiple instances is to bypass the JVM memory limitations of a single instance. Dave Watts, CTO, Fig Leaf Software http://www.figleaf.com/ Fig Leaf Software provides the highest caliber vendor-authorized instruction at our training centers in Washington DC, Atlanta, Chicago, Baltimore, Northern Virginia, or on-site at your location. Visit http://training.figleaf.com/ for more information! ~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241163 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
Re: MaxHeapSize + MaxPermSize
Multiple Instances and clustering. Like most things, when you reach a certain point, it's better to introduce more hardware than simply keep throwing memory(or cpus) at it. On 22/05/06, Rob Wilkerson <[EMAIL PROTECTED]> wrote: > Load balancing, I imagine. :-) > > On 5/22/06, Snake <[EMAIL PROTECTED]> wrote: > > I have to wonder what one does if they have a CF server that requires more > > than 1.8gb RAM for the JVM, say u have some big heavy site sthat do a lot > > of caching of big files/queries? > > > > > > -Original Message- > > From: Dante Orlando [mailto:[EMAIL PROTECTED] > > Sent: 22 May 2006 19:41 > > To: CF-Talk > > Subject: Re: MaxHeapSize + MaxPermSize > > > > Thanks for all of your replies. First of all, I was really just looking for > > the "whys" rather than any particular recommendation on what values to set > > these params to. As far as the permanent generation being part of the heap, > > I have been able to verify that the permenent generation (i.e. -XX:PermSize > > and -XX:MaxPermSize) is *separate* from the object heap (i.e. -Xms and > > -Xmx). See the following diagram from Sun: > > > > http://java.sun.com/docs/hotspot/gc1.4.2/fig4.gif > > > > which was taken from > > > > http://java.sun.com/docs/hotspot/gc1.4.2/ > > > > .also see Moazam Raja's explanation in the following blog entry: > > > > http://www.unixville.com/~moazam/stories/2004/05/17/maxpermsizeAndHowItRelat > > esToTheOverallHeap.html > > > > Rob: > > I too have heard the explanation about the object heap needing to occupy a > > contiguous block of memory, and that Windows is only able to meet that > > requirement up to 2GB. Incidently, this is also why the /3GB flag is useless > > on Windows at least as far as a jvm process is concerned. The thing is that > > even with these restrictions I thought you could still get a jvm process > > that was closer to 2GB, as opposed to the 1.6GB I'm seeing in my tests. > > There is even a ColdFusion TechNote that suggests that the maximum value > > should be more like 1.8GB ( > > http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_19359). It turns > > out that, if you dig a little deeper, the maximum contiguous memory block > > you can get in Windows is actually a bit less than 2GB because of the way > > some of the system DLLs are loaded, and the fact that Windows implements two > > "standard" 64KB holes in the virtual address space, one at the bottom, and > > another near the 2GB boundary. > > > > I guess I'm beginning to answer my own question... Anybody else have any > > additional thoughts on the matter? > > > > thx, > > > > -dante > > > > > > > > > > > > ~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241162 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
Re: MaxHeapSize + MaxPermSize
According to my tests, it's a 1.6GB max for a jvm process, but to answer your question, you would either need to move to Linux/Unix, or 64bit Windows. ~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241161 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=11502.10531.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
RE: Server Backup Solutions
I use the standard NT Backup that comes with Windows. I made sure my drive mappings were setup and then scheduled Backups from that to a tape. Now ideally would be awesome to have the auto-tape changer System. I have seen it before but the project I am on, well Lets say we do with what we have or what we can scrounge for. -Original Message- From: Mike Klostermeyer [mailto:[EMAIL PROTECTED] Sent: Monday, May 22, 2006 3:07 PM To: CF-Talk Subject: OT: Server Backup Solutions Curious if anyone has some suggestions for server backup software. I need to backup (probably to a separate drive cage) web servers and database servers in a Microsoft environment, and looking for any input or experiences. I don't need much, but some requirements are to be able to put backup process on a scheduler, compression, and obviously, the cheaper the better. Thanks. Mike ~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241160 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
Re: MaxHeapSize + MaxPermSize
Load balancing, I imagine. :-) On 5/22/06, Snake <[EMAIL PROTECTED]> wrote: > I have to wonder what one does if they have a CF server that requires more > than 1.8gb RAM for the JVM, say u have some big heavy site sthat do a lot > of caching of big files/queries? > > > -Original Message- > From: Dante Orlando [mailto:[EMAIL PROTECTED] > Sent: 22 May 2006 19:41 > To: CF-Talk > Subject: Re: MaxHeapSize + MaxPermSize > > Thanks for all of your replies. First of all, I was really just looking for > the "whys" rather than any particular recommendation on what values to set > these params to. As far as the permanent generation being part of the heap, > I have been able to verify that the permenent generation (i.e. -XX:PermSize > and -XX:MaxPermSize) is *separate* from the object heap (i.e. -Xms and > -Xmx). See the following diagram from Sun: > > http://java.sun.com/docs/hotspot/gc1.4.2/fig4.gif > > which was taken from > > http://java.sun.com/docs/hotspot/gc1.4.2/ > > .also see Moazam Raja's explanation in the following blog entry: > > http://www.unixville.com/~moazam/stories/2004/05/17/maxpermsizeAndHowItRelat > esToTheOverallHeap.html > > Rob: > I too have heard the explanation about the object heap needing to occupy a > contiguous block of memory, and that Windows is only able to meet that > requirement up to 2GB. Incidently, this is also why the /3GB flag is useless > on Windows at least as far as a jvm process is concerned. The thing is that > even with these restrictions I thought you could still get a jvm process > that was closer to 2GB, as opposed to the 1.6GB I'm seeing in my tests. > There is even a ColdFusion TechNote that suggests that the maximum value > should be more like 1.8GB ( > http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_19359). It turns > out that, if you dig a little deeper, the maximum contiguous memory block > you can get in Windows is actually a bit less than 2GB because of the way > some of the system DLLs are loaded, and the fact that Windows implements two > "standard" 64KB holes in the virtual address space, one at the bottom, and > another near the 2GB boundary. > > I guess I'm beginning to answer my own question... Anybody else have any > additional thoughts on the matter? > > thx, > > -dante > > > > > ~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241159 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=11502.10531.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
OT: Server Backup Solutions
Curious if anyone has some suggestions for server backup software. I need to backup (probably to a separate drive cage) web servers and database servers in a Microsoft environment, and looking for any input or experiences. I don't need much, but some requirements are to be able to put backup process on a scheduler, compression, and obviously, the cheaper the better. Thanks. Mike ~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241158 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
RE: MaxHeapSize + MaxPermSize
I have to wonder what one does if they have a CF server that requires more than 1.8gb RAM for the JVM, say u have some big heavy site sthat do a lot of caching of big files/queries? -Original Message- From: Dante Orlando [mailto:[EMAIL PROTECTED] Sent: 22 May 2006 19:41 To: CF-Talk Subject: Re: MaxHeapSize + MaxPermSize Thanks for all of your replies. First of all, I was really just looking for the "whys" rather than any particular recommendation on what values to set these params to. As far as the permanent generation being part of the heap, I have been able to verify that the permenent generation (i.e. -XX:PermSize and -XX:MaxPermSize) is *separate* from the object heap (i.e. -Xms and -Xmx). See the following diagram from Sun: http://java.sun.com/docs/hotspot/gc1.4.2/fig4.gif which was taken from http://java.sun.com/docs/hotspot/gc1.4.2/ .also see Moazam Raja's explanation in the following blog entry: http://www.unixville.com/~moazam/stories/2004/05/17/maxpermsizeAndHowItRelat esToTheOverallHeap.html Rob: I too have heard the explanation about the object heap needing to occupy a contiguous block of memory, and that Windows is only able to meet that requirement up to 2GB. Incidently, this is also why the /3GB flag is useless on Windows at least as far as a jvm process is concerned. The thing is that even with these restrictions I thought you could still get a jvm process that was closer to 2GB, as opposed to the 1.6GB I'm seeing in my tests. There is even a ColdFusion TechNote that suggests that the maximum value should be more like 1.8GB ( http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_19359). It turns out that, if you dig a little deeper, the maximum contiguous memory block you can get in Windows is actually a bit less than 2GB because of the way some of the system DLLs are loaded, and the fact that Windows implements two "standard" 64KB holes in the virtual address space, one at the bottom, and another near the 2GB boundary. I guess I'm beginning to answer my own question... Anybody else have any additional thoughts on the matter? thx, -dante ~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241157 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=11502.10531.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
RE: Google Analytics?
I have found Google Analytics to increase load time making my pages slower. Has anyone found a solution to this? Al -Original Message- From: Paul [mailto:[EMAIL PROTECTED] Sent: Monday, May 22, 2006 12:10 PM To: CF-Talk Subject: RE: Google Analytics? This must no longer be true; I just set up Analytics last month on our SSL site and after searching their online help for "SSL" and following the instructions, all is working well. -Original Message- From: Dave Watts [mailto:[EMAIL PROTECTED] Sent: Monday, May 22, 2006 7:37 AM To: CF-Talk Subject: RE: Google Analytics? > Since it appears many here use Google Analytics, I have a > question. Does anyone use it over an SSL connection (during > the checkout process of a cart, for example)? I can't figure > out how to use it without throwing browser security warnings > (domain name does not match, etc.). Any way around this? Unfortunately, the SSL portion of Google Analytics is slightly broken. They have SSL set up so that you can fetch their files, but their certificate doesn't match the URL used to fetch the files. ~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241156 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
Re: MaxHeapSize + MaxPermSize
Thanks for all of your replies. First of all, I was really just looking for the "whys" rather than any particular recommendation on what values to set these params to. As far as the permanent generation being part of the heap, I have been able to verify that the permenent generation (i.e. -XX:PermSize and -XX:MaxPermSize) is *separate* from the object heap (i.e. -Xms and -Xmx). See the following diagram from Sun: http://java.sun.com/docs/hotspot/gc1.4.2/fig4.gif which was taken from http://java.sun.com/docs/hotspot/gc1.4.2/ also see Moazam Raja's explanation in the following blog entry: http://www.unixville.com/~moazam/stories/2004/05/17/maxpermsizeAndHowItRelatesToTheOverallHeap.html Rob: I too have heard the explanation about the object heap needing to occupy a contiguous block of memory, and that Windows is only able to meet that requirement up to 2GB. Incidently, this is also why the /3GB flag is useless on Windows at least as far as a jvm process is concerned. The thing is that even with these restrictions I thought you could still get a jvm process that was closer to 2GB, as opposed to the 1.6GB I'm seeing in my tests. There is even a ColdFusion TechNote that suggests that the maximum value should be more like 1.8GB ( http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_19359). It turns out that, if you dig a little deeper, the maximum contiguous memory block you can get in Windows is actually a bit less than 2GB because of the way some of the system DLLs are loaded, and the fact that Windows implements two "standard" 64KB holes in the virtual address space, one at the bottom, and another near the 2GB boundary. I guess I'm beginning to answer my own question... Anybody else have any additional thoughts on the matter? thx, -dante ~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241155 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=11502.10531.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
I think I've discovered a bug in CFMX
Reading this I know it might sound like an Apache bug, but I only get the undesired behavior when I request certain types of CFM pages. Please read and help me!. SYMPTOM - Web browser seems to lose connection with the web server when making CFM requests that take a long time (over 10 seconds) to process. FIREFOX SIDE EFFECT When the apparent connection with the web server breaks, Firefox prompts me to download my "index.cfm" file. INTERNET EXPLORER SIDE EFFECT -- When the apparent connection with the web server breaks, Internet Explorer makes a second request passing all of the same data a second time. OTHER CLUES --- - This problem has surfaced in two unrelated parts (meaning there is no shared code) of one web application and in another web application as well. - This problem has occurred in a simple 3 page site that I wrote. - The problem seems to occur when CFMX is busy doing something like looping over a file write or trying to cache a large query object. - I could not reproduce this behavior when testing requests to a page that did a 45 second pause. - Although the web server seems to cut the connection with the browser, the CFML requests appear to finish because I'm usually able to verify that the thread finished what it was supposed to do on the server SERVER SOFTWARE --- Windows 2003 Server Apache 1.3.33 CFMX 7,0,1,116466 WHAT I'VE ALREADY TRIED --- - I check the Windows Event Log, Apache error and access log, and the ColdFusion logs, and the Jrun logs. I'm not able to find any information that seems to be related to this problem in any of these logs. - I have a copy of SeeFusion that I've recently installed (after the problem had started) and it's not able to reveal any clues - I did an HTTP trace with "HttpLook" and I'm able to verify IE is making a second POST at the server action page 15-20 seconds after I've pushed the submit button. I'm talking about forms that have no special javascript submit functionality. HELP! Thank you, Jon This electronic message transmission contains information from Collegiate Funding Services, LLC or its subsidiaries or affiliates that may be confidential or privileged. The information is intended to be for the use of only the individual or entity named above. If you are not the intended recipient, be aware that any disclosure, copying, distribution or use of the contents of this information is strictly prohibited. If you have received this electronic transmission in error, please notify the sender by reply e-mail @cfsloans.com immediately and delete this e-mail and any attachments from your system and any copies you may have made, electronic or otherwise. ~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241154 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
RE: Having problem with query and multiple tables.
You would have to do a left join. Now this Is untested and it's been a long time since I've written one of these but it's something like SELECT p.name, p.product_id, p.content_id, p.creationdate, h.hits AS hits, h.clickthroughs AS clicks, s.pagetitle, s.parent, c.pagetitle AS category FROM Products p LEFT JOIN Product_Hits h ON p.product_id = h.product_id, ContentPages s, ContentPages c Where p.Status = 1 AND p.content_id = s.content_id AND s.parent = c.content_id ORDER BY #sortorder# Thank you, Katrina Chapman Center Manager Whittier Community Center 435-753-9008 > -Original Message- > From: Michael Grove [mailto:[EMAIL PROTECTED] > Sent: Monday, May 22, 2006 12:15 PM > To: CF-Talk > Subject: Having problem with query and multiple tables. > > I have a query calling on data in multiple tables. The > database is MS Access. Here is the query that I am using > > SELECTp.name, p.product_id, p.content_id, > p.creationdate, h.hits AS hits, > h.clickthroughs AS clicks, s.pagetitle, s.parent, c.pagetitle > AS category FROM Products p, Product_Hits h, ContentPages s, > ContentPages c Where p.Status = 1 AND p.product_id = > h.product_id AND p.content_id = s.content_id AND s.parent = > c.content_id ORDER BY #sortorder# > > All the data is returned fine accept that The HITS and CLICKS > if there is not HIT available for a particular product in the > PRODUCT_HITS table, then that product does not show up. I > could break this into tow separate queries except that I need > to be able to dynamically change the sort order. > > Basically I need to list all of the products even if there > has been not HIT record created for it. Is this possible > using a single query? > > > ~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241153 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
RE: Having problem with query and multiple tables.
> I have a query calling on data in multiple tables. The > database is MS Access. Here is the query that I am using > > SELECTp.name, p.product_id, p.content_id, > p.creationdate, h.hits AS hits, > h.clickthroughs AS clicks, s.pagetitle, s.parent, c.pagetitle > AS category FROM Products p, Product_Hits h, ContentPages s, > ContentPages c Where p.Status = 1 AND p.product_id = > h.product_id AND p.content_id = s.content_id AND s.parent = > c.content_id ORDER BY #sortorder# > > All the data is returned fine accept that The HITS and CLICKS > if there is not HIT available for a particular product in the > PRODUCT_HITS table, then that product does not show up. I > could break this into tow separate queries except that I need > to be able to dynamically change the sort order. > > Basically I need to list all of the products even if there > has been not HIT record created for it. Is this possible > using a single query? Yes, you need to create an outer join instead of an inner join: SELECT p.name, p.product_id, p.content_id, p.creationdate, h.hits AS hits, h.clickthroughs AS clicks, s.pagetitle, s.parent, c.pagetitle AS category FROMProducts p, INNER JOIN ContentPages s ON p.content_id = s.content_id INNER JOIN ContentPages c ON s.parent = c.content_id LEFT OUTER JOIN Product_Hits h ON p.product_id = h.product_id ORDER BY#sortorder# Of course, I wasn't able to test this query, but this should be in the ballpark. Dave Watts, CTO, Fig Leaf Software http://www.figleaf.com/ Fig Leaf Software provides the highest caliber vendor-authorized instruction at our training centers in Washington DC, Atlanta, Chicago, Baltimore, Northern Virginia, or on-site at your location. Visit http://training.figleaf.com/ for more information! ~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241152 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
RE: Google Analytics?
> I'm still getting the security warning. Any ideas what I need to do? Use this URL for your secure pages: https://ssl.google-analytics.com/urchin.js Dave Watts, CTO, Fig Leaf Software http://www.figleaf.com/ Fig Leaf Software provides the highest caliber vendor-authorized instruction at our training centers in Washington DC, Atlanta, Chicago, Baltimore, Northern Virginia, or on-site at your location. Visit http://training.figleaf.com/ for more information! ~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241151 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
Having problem with query and multiple tables.
I have a query calling on data in multiple tables. The database is MS Access. Here is the query that I am using SELECT p.name, p.product_id, p.content_id, p.creationdate, h.hits AS hits, h.clickthroughs AS clicks, s.pagetitle, s.parent, c.pagetitle AS category FROM Products p, Product_Hits h, ContentPages s, ContentPages c Where p.Status = 1 AND p.product_id = h.product_id AND p.content_id = s.content_id AND s.parent = c.content_id ORDER BY #sortorder# All the data is returned fine accept that The HITS and CLICKS if there is not HIT available for a particular product in the PRODUCT_HITS table, then that product does not show up. I could break this into tow separate queries except that I need to be able to dynamically change the sort order. Basically I need to list all of the products even if there has been not HIT record created for it. Is this possible using a single query? ~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241150 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=11502.10531.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
RE: Google Analytics?
I'm still getting the security warning. Any ideas what I need to do? Mike -Original Message- From: Dave Watts [mailto:[EMAIL PROTECTED] Sent: Monday, May 22, 2006 11:24 AM To: CF-Talk Subject: RE: Google Analytics? > This must no longer be true; I just set up Analytics last > month on our SSL site and after searching their online help > for "SSL" and following the instructions, all is working well. Maybe it was just a temporary glitch. The SSL certificate seems to be fine now. Dave Watts, CTO, Fig Leaf Software http://www.figleaf.com/ Fig Leaf Software provides the highest caliber vendor-authorized instruction at our training centers in Washington DC, Atlanta, Chicago, Baltimore, Northern Virginia, or on-site at your location. Visit http://training.figleaf.com/ for more information! ~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241149 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
RE: cfqueryparam BIND list limit
I used to get around Oracle's 1000-item list limit by breaking up the list into an array of lists then looping over the array and putting OR between each iteration. I expect that there is a much more elegant way to do it with a temporary table. -Original Message- From: Billy Jamme [mailto:[EMAIL PROTECTED] Sent: Monday, May 22, 2006 1:40 PM To: CF-Talk Subject: cfqueryparam BIND list limit Hello All, I'm having some DB issues and I'm wondering if I could get some help with it. I'm running CFMX7, and MSSQL2k. On this specific task, I'm using the IN or NOT IN clauses in sql to grab a set of records. The problem occurs when I attempt to use cfqueryparam to fetch a 2100+ item list of records. Query 1: SELECT id FROM tempTable WHERE id IN () And I receive the error: "The DBMS returned an unspecified error." However if I select the recordset using: Query 2: SELECT id FROM tempTable WHERE id IN (#list#) I receive no error. And receive the recordset. To add to the pie, if I run this query: Query 3: SELECT id, FROM tempTable WHERE id IN I still get the same error message: "The DBMS returned an unspecified error." Even though syntaxically the query is invalid. To further troubleshoot I installed the jTBS 1.2 drivers and I ran all 3 queries again. The result this time around was: Query 1: "Prepared or callable statement has more than 2000 parameter markers." Query 2: No errors. Query 3: "Prepared or callable statement has more than 2000 parameter markers." What I'm guessing is that there is some form up of upper limit on the number of BIND variables that each driver can handle. What leads me to this conclusion is a couple of things. 1. The query will crash before the DB "sees" it. 2. Non-BINDed variables execute fine. Also, if I use the default DataDirect SQL drivers I can increase the number of BIND variables to 2097, where if I run the jTDS drivers I'm limited to 2000. Now the question. Is there a way to get around this limit? And if so, should I try to? Many thanks, Jim ~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241148 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
cfqueryparam BIND list limit
Hello All, I'm having some DB issues and I'm wondering if I could get some help with it. I'm running CFMX7, and MSSQL2k. On this specific task, I'm using the IN or NOT IN clauses in sql to grab a set of records. The problem occurs when I attempt to use cfqueryparam to fetch a 2100+ item list of records. Query 1: SELECT id FROM tempTable WHERE id IN () And I receive the error: "The DBMS returned an unspecified error." However if I select the recordset using: Query 2: SELECT id FROM tempTable WHERE id IN (#list#) I receive no error. And receive the recordset. To add to the pie, if I run this query: Query 3: SELECT id, FROM tempTable WHERE id IN I still get the same error message: "The DBMS returned an unspecified error." Even though syntaxically the query is invalid. To further troubleshoot I installed the jTBS 1.2 drivers and I ran all 3 queries again. The result this time around was: Query 1: "Prepared or callable statement has more than 2000 parameter markers." Query 2: No errors. Query 3: "Prepared or callable statement has more than 2000 parameter markers." What I'm guessing is that there is some form up of upper limit on the number of BIND variables that each driver can handle. What leads me to this conclusion is a couple of things. 1. The query will crash before the DB "sees" it. 2. Non-BINDed variables execute fine. Also, if I use the default DataDirect SQL drivers I can increase the number of BIND variables to 2097, where if I run the jTDS drivers I'm limited to 2000. Now the question. Is there a way to get around this limit? And if so, should I try to? Many thanks, Jim ~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241147 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
Javascript image reorder package
Anyone know of a javascript package available to re-order images on-screen? ~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241146 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
RE: Possible in SQL?
> I have a table that looks something like this. > > Com1 genderfname lname > 001 M Matt Smith > 001 M Bill Wright > 005 FKara Brown > 005 M Mike White > > > > What I need to do is pull a record from each "com1" group > that meets my where criteria. Say from above I want all the > males. I would want the answer to be > > 001 M Matt Smith > 005 M Mike White > > Or > > 001 M Bill Wright > 005 M Mike White > > I don't care which record I just want ONE per com1 id meeting > the criteria. > I tried using distinct but that will not work as you have to > list all the field names out and then group but the none > distinct ones which gives me all the com1's meeting the where > criteria. Any idea's? You're not looking for distinct records, you want one random record from within a set of records that otherwise match your search conditions. You can fix this within your SQL using "TOP 1" or whatever similar functionality your database provides to get the first matching record within a set, or you can fix this within your CFML by using the GROUP attribute of CFOUTPUT to just show the first row within the set. Dave Watts, CTO, Fig Leaf Software http://www.figleaf.com/ Fig Leaf Software provides the highest caliber vendor-authorized instruction at our training centers in Washington DC, Atlanta, Chicago, Baltimore, Northern Virginia, or on-site at your location. Visit http://training.figleaf.com/ for more information! ~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241145 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
RE: Currency Converter
Wish there was something like that for Mortgage rates :-) -Original Message- From: Josh Nathanson [mailto:[EMAIL PROTECTED] Sent: Monday, May 22, 2006 12:25 PM To: CF-Talk Subject: Re: Currency Converter I'm using xe.com with good results. It's easy to use, just insert some javascript. If you've got good JS skills you can tweak it to blend in with your site. There's a free version that doesn't update the conversion rates as often, or a paid version that updates the rates daily. -- Josh - Original Message - From: "Michael Wolfe" <[EMAIL PROTECTED]> To: "CF-Talk" Sent: Monday, May 22, 2006 6:59 AM Subject: re: Currency Converter > > Mike, > > I've used oanda.com for several projects. > > -- Mike Wolfe > > > > From: "Mike | NZSolutions Ltd" <[EMAIL PROTECTED]> > Sent: Sunday, May 21, 2006 10:10 PM > To: CF-Talk > Subject: Currency Converter > > Hi guys, > > I am looking for a currency converter to include on a clients site. What > are people's favourites - something coldfusion orientated would be cool. > > Basically I just need the visitor to be able to see the displayed price > (NZ Dollars) in their own currency - it does no need to alter any > variables. The transaction will still be in NZ Dollars. > > mike > > > > > > > ~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241144 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
Re: Currency Converter
I'm using xe.com with good results. It's easy to use, just insert some javascript. If you've got good JS skills you can tweak it to blend in with your site. There's a free version that doesn't update the conversion rates as often, or a paid version that updates the rates daily. -- Josh - Original Message - From: "Michael Wolfe" <[EMAIL PROTECTED]> To: "CF-Talk" Sent: Monday, May 22, 2006 6:59 AM Subject: re: Currency Converter > > Mike, > > I've used oanda.com for several projects. > > -- Mike Wolfe > > > > From: "Mike | NZSolutions Ltd" <[EMAIL PROTECTED]> > Sent: Sunday, May 21, 2006 10:10 PM > To: CF-Talk > Subject: Currency Converter > > Hi guys, > > I am looking for a currency converter to include on a clients site. What > are people's favourites - something coldfusion orientated would be cool. > > Basically I just need the visitor to be able to see the displayed price > (NZ Dollars) in their own currency - it does no need to alter any > variables. The transaction will still be in NZ Dollars. > > mike > > > > > > > ~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241143 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=11502.10531.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
RE: Google Analytics?
> This must no longer be true; I just set up Analytics last > month on our SSL site and after searching their online help > for "SSL" and following the instructions, all is working well. Maybe it was just a temporary glitch. The SSL certificate seems to be fine now. Dave Watts, CTO, Fig Leaf Software http://www.figleaf.com/ Fig Leaf Software provides the highest caliber vendor-authorized instruction at our training centers in Washington DC, Atlanta, Chicago, Baltimore, Northern Virginia, or on-site at your location. Visit http://training.figleaf.com/ for more information! ~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241142 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=11502.10531.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
RE: Possible in SQL?
I tried that. That will give you records with com1 showing up more than once since the names ect are not distinct sql returns all the combinations. If it would only give me one per change in com1 I would be done. Jeremy -Original Message- From: Snake [mailto:[EMAIL PROTECTED] Sent: Monday, May 22, 2006 8:52 AM To: CF-Talk Subject: RE: Possible in SQL? I would have thought distinct would do what you want, are you sure you use dit correctly. Select distinct com1, gender, fname, lname FROM mytable WHERE gender = 'M' Group by com1, gender, fname, lname - Snake -Original Message- From: Jeremy Bunton [mailto:[EMAIL PROTECTED] Sent: 22 May 2006 13:34 To: CF-Talk Subject: Possible in SQL? Hello, I have a table that looks something like this. Com1 genderfname lname 001 M Matt Smith 001 M Bill Wright 005 FKara Brown 005 M Mike White What I need to do is pull a record from each "com1" group that meets my where criteria. Say from above I want all the males. I would want the answer to be 001 M Matt Smith 005 M Mike White Or 001 M Bill Wright 005 M Mike White I don't care which record I just want ONE per com1 id meeting the criteria. I tried using distinct but that will not work as you have to list all the field names out and then group but the none distinct ones which gives me all the com1's meeting the where criteria. Any idea's? Jeremy ~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241141 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=11502.10531.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
RE: HELP I'm drowning in a sea of encoding.
Can't think of any... you could be extra safe and be sure your database is set to the same encoding. I'll try and remember that. In this case there is no database involved; the app uses simple xml files. -- Ian Skinner Web Programmer BloodSource www.BloodSource.org Sacramento, CA - | 1 | | - Binary Soduko | | | - "C code. C code run. Run code run. Please!" - Cynthia Dunning Confidentiality Notice: This message including any attachments is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender and delete any copies of this message. ~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241140 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
RE: Google Analytics?
This must no longer be true; I just set up Analytics last month on our SSL site and after searching their online help for "SSL" and following the instructions, all is working well. -Original Message- From: Dave Watts [mailto:[EMAIL PROTECTED] Sent: Monday, May 22, 2006 7:37 AM To: CF-Talk Subject: RE: Google Analytics? > Since it appears many here use Google Analytics, I have a > question. Does anyone use it over an SSL connection (during > the checkout process of a cart, for example)? I can't figure > out how to use it without throwing browser security warnings > (domain name does not match, etc.). Any way around this? Unfortunately, the SSL portion of Google Analytics is slightly broken. They have SSL set up so that you can fetch their files, but their certificate doesn't match the URL used to fetch the files. ~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241139 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
Re: Google Analytics?
> Looking around in my login of analytics it would appear you need to ask > Google for one.. > > http://www.google.com/analytics/sign_up.html Yep, it took me about a month to get an invite. Thanks for all the words! I'm actually quite excited about it now. ~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241138 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=11502.10531.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
Re: Google Analytics?
Looking around in my login of analytics it would appear you need to ask Google for one.. http://www.google.com/analytics/sign_up.html Neil On 5/22/06, Ken Ketsdever <[EMAIL PROTECTED]> wrote: > > I've tried to register a couple of times over the past few weeks > currently it appears as though you need an invitation or to register for > access at some later date. > > Does anyone have the ability to send an invitation? > > > Ken > > Confidentiality Notice: This message including any > attachments is for the sole use of the intended > recipient(s) and may contain confidential and privileged > information. Any unauthorized review, use, disclosure or > distribution is prohibited. If you are not the > intended recipient, please contact the sender and > delete any copies of this message. > > > > ~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241137 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
RE: Suggestion for the mods...RE: what does application.home point to?
I sort ALL of my mailing lists into separate folders (or, in Gmail, labels). If I didn't, my inbox would be overwhelmed by it. I usually read mailing list mail during my down times. Anything that's in my inbox was sent directly to me and I usually need to act on it relatively soon. My Outlook rule keys on the To: field being cf-talk@houseoffusion.com and moves it to my CF-Talk folder. -Original Message- From: Eric Roberts [mailto:[EMAIL PROTECTED] Sent: Friday, May 19, 2006 11:25 PM To: CF-Talk Subject: RE: Suggestion for the mods...RE: what does application.home point to? The problem lies in that I look at the listing of unread mail and it looks like spam Eric -Original Message- From: Charlie Griefer [mailto:[EMAIL PROTECTED] Sent: Friday, 19 May 2006 13:02 To: CF-Talk Subject: Re: Suggestion for the mods...RE: what does application.home point to? couldn't you just filter on where reply-to is cf-talk@houseoffusion.com ? On 5/19/06, Eric Roberts <[EMAIL PROTECTED]> wrote: > I left the original subject line it tact to show what I am referring to... > > Would it be possible to add something to all of the subjects, > programmatically, to show where the mail is coming from? A good > feature that the Yahoo lists have, for instance if this were a Yahoo > group, would add [CF-Talk] to the beginning of the subject line. If > something like this could be done, it would help differentiate the > real email from spam. I accidentally marked as spam a couple of > emails from this list that had the above subject line as I have been getting spam that had a similar format. > It would also help outlook users and others who have similar mail > rules in their email clients to redirect mail from this list into a > folder. It helps the mail to stick out from the sea of spam I get > every day. Thanks for taking a look at this and for considering my idea! > > Blessings, > Eric Roberts > Owner/CF Developer > Three Ravens Consulting > http://www.threeravensconsulting.com > ~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241136 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
RE: Google Analytics?
I've tried to register a couple of times over the past few weeks currently it appears as though you need an invitation or to register for access at some later date. Does anyone have the ability to send an invitation? Ken Confidentiality Notice: This message including any attachments is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender and delete any copies of this message. ~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241135 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=11502.10531.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
Re: Currency Converter
>>Hi guys, > >I've generally used the currency converter web service from Xmethods.net: >http://www.antiwrap.com/?1005 > >It works really well. > >hth, >larry For some reason that link didn't work on the web archive, so lets try the original URL: http://www.xmethods.net/ve2/ViewListing.po?key=uuid:53819AF6-3ED1-F875-5FD6-9F21573C831F sorry about that. regards, larry ~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241134 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
Re: Currency Converter
>Hi guys, > >I am looking for a currency converter to include on a clients site. What >are people's favourites - something coldfusion orientated would be cool. > >Basically I just need the visitor to be able to see the displayed price >(NZ Dollars) in their own currency - it does no need to alter any >variables. The transaction will still be in NZ Dollars. > >mike I've generally used the currency converter web service from Xmethods.net: http://www.antiwrap.com/?1005 It works really well. hth, larry -- Larry C. Lyons Web Analyst BEI Resources American Type Culture Collection email: llyons(at)atcc(dot)org tel: 703.365.2700.2678 -- ~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241133 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=11502.10531.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
CFC Weird 500 Error
Something strange has just started happening on our production server. CreateObject calls to cfc's cause CF to output this and then stop: 500 cfConventionSessionUtility2ecfc1296777452$funcSEARCHSESSIONS I can catch it using cferror and I get this stack trace: java.lang.NoClassDefFoundError: cfConventionSessionUtility2ecfc1296777452$funcSEARCHSESSIONS at java.lang.Class.getDeclaredConstructors0(Native Method) at java.lang.Class.privateGetDeclaredConstructors(Unknown Source) at java.lang.Class.getConstructor0(Unknown Source) at java.lang.Class.newInstance0(Unknown Source) at java.lang.Class.newInstance(Unknown Source) at coldfusion.runtime.TemplateClassLoader.newInstance(TemplateClassLoader.java:393) at coldfusion.runtime.TemplateClassLoader.newInstance(TemplateClassLoader.java:374) at coldfusion.runtime.TemplateProxyFactory.resolveName(TemplateProxyFactory.java:118) at coldfusion.runtime.TemplateProxyFactory.resolveName(TemplateProxyFactory.java:102) at coldfusion.runtime.TemplateProxyFactory.resolveName(TemplateProxyFactory.java:96) at coldfusion.runtime.TemplateProxyFactory.resolveName(TemplateProxyFactory.java:610) at coldfusion.runtime.CFPage.createObject(CFPage.java:5880) at coldfusion.runtime.CFPage.CreateObject(CFPage.java:5848) at coldfusion.runtime.CFPage.CreateObject(CFPage.java:5813) at cfsessionConventionListAll2ecfm773335868.runPage(C:\CFusionMX\cfshare\tag\smoothpaper\session\sessionConventionListAll.cfm:12) at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:152) at coldfusion.filter.CFVariablesScopeFilter.invoke(CFVariablesScopeFilter.java:63) at coldfusion.tagext.lang.ModuleTag.doStartTag(ModuleTag.java:255) at coldfusion.runtime.CfJspPage._emptyTcfTag(CfJspPage.java:1918) at cfplanner2ecfm1979905374._factor0(Z:\Web Sites\applications\smoothPaper\planner.cfm:48) at cfplanner2ecfm1979905374._factor1(Z:\Web Sites\applications\smoothPaper\planner.cfm:25) at cfplanner2ecfm1979905374._factor67(Z:\Web Sites\applications\smoothPaper\planner.cfm:22) at cfplanner2ecfm1979905374.runPage(Z:\Web Sites\applications\smoothPaper\planner.cfm:1) at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:152) at coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:343) at coldfusion.filter.CfincludeFilter.invoke(CfincludeFilter.java:65) at coldfusion.filter.ApplicationFilter.invoke(ApplicationFilter.java:204) at coldfusion.filter.RequestMonitorFilter.invoke(RequestMonitorFilter.java:51) at coldfusion.filter.PathFilter.invoke(PathFilter.java:86) at coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:50) at coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:28) at coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38) at coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38) at coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22) at coldfusion.CfmServlet.service(CfmServlet.java:105) at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:78) at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:91) at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42) at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:257) at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:527) at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:204) at jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:349) at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:457) at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:295) at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66) Any ideas? It only just started happening. Cheers, Sam (Cross posted to cfcDev) ~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241132 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
re: Currency Converter
Mike, I've used oanda.com for several projects. -- Mike Wolfe From: "Mike | NZSolutions Ltd" <[EMAIL PROTECTED]> Sent: Sunday, May 21, 2006 10:10 PM To: CF-Talk Subject: Currency Converter Hi guys, I am looking for a currency converter to include on a clients site. What are people's favourites - something coldfusion orientated would be cool. Basically I just need the visitor to be able to see the displayed price (NZ Dollars) in their own currency - it does no need to alter any variables. The transaction will still be in NZ Dollars. mike ~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241131 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
RE: CF jobs listings?
We are in the Southern Maryland area. About an hour and half south of DC. John Burns Certified Advanced ColdFusion MX Developer Wyle Laboratories, Inc. | Web Developer -Original Message- From: Andy Matthews [mailto:[EMAIL PROTECTED] Sent: Monday, May 22, 2006 9:29 AM To: CF-Talk Subject: RE: CF jobs listings? Where in the country are you? My CFUG posts job listings, but they have to be in the Nashville area. -Original Message- From: Burns, John D [mailto:[EMAIL PROTECTED] Sent: Monday, May 22, 2006 8:19 AM To: CF-Talk Subject: OT: CF jobs listings? Ok, I know it's off topic but I figured you all would know. My company is looking to hire some new CF developers and are planning to post to the CF-Jobs list but we were wondering if anyone knows of other good places to post CF job openings. Anyone with experience or information would be extremely helpful. You can reply off-list to me unless you think it's pertinent to keep on the list for others. John Burns Certified Advanced ColdFusion MX Developer Wyle Laboratories, Inc. | Web Developer ~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241130 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=11502.10531.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
RE: Google Analytics?
> Since it appears many here use Google Analytics, I have a > question. Does anyone use it over an SSL connection (during > the checkout process of a cart, for example)? I can't figure > out how to use it without throwing browser security warnings > (domain name does not match, etc.). Any way around this? Unfortunately, the SSL portion of Google Analytics is slightly broken. They have SSL set up so that you can fetch their files, but their certificate doesn't match the URL used to fetch the files. If I recall correctly, you can work around this by downloading their .js file periodically and referencing it locally instead. I don't think it changes that often. Dave Watts, CTO, Fig Leaf Software http://www.figleaf.com/ Fig Leaf Software provides the highest caliber vendor-authorized instruction at our training centers in Washington DC, Atlanta, Chicago, Baltimore, Northern Virginia, or on-site at your location. Visit http://training.figleaf.com/ for more information! ~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241129 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=11502.10531.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
RE: CF jobs listings?
> Ok, I know it's off topic but I figured you all would know. > My company is looking to hire some new CF developers and are > planning to post to the CF-Jobs list but we were wondering if > anyone knows of other good places to post CF job openings. > Anyone with experience or information would be extremely > helpful. You can reply off-list to me unless you think it's > pertinent to keep on the list for others. You might post to regional lists, such as user group lists. In the DC area, that would include the wammo-jobs list: http://wammo.org/mailman/listinfo/jobs Dave Watts, CTO, Fig Leaf Software http://www.figleaf.com/ Fig Leaf Software provides the highest caliber vendor-authorized instruction at our training centers in Washington DC, Atlanta, Chicago, Baltimore, Northern Virginia, or on-site at your location. Visit http://training.figleaf.com/ for more information! ~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241128 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
RE: CF jobs listings?
Where in the country are you? My CFUG posts job listings, but they have to be in the Nashville area. -Original Message- From: Burns, John D [mailto:[EMAIL PROTECTED] Sent: Monday, May 22, 2006 8:19 AM To: CF-Talk Subject: OT: CF jobs listings? Ok, I know it's off topic but I figured you all would know. My company is looking to hire some new CF developers and are planning to post to the CF-Jobs list but we were wondering if anyone knows of other good places to post CF job openings. Anyone with experience or information would be extremely helpful. You can reply off-list to me unless you think it's pertinent to keep on the list for others. John Burns Certified Advanced ColdFusion MX Developer Wyle Laboratories, Inc. | Web Developer ~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241127 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
Table Desing
I'm workin on a contact management system and im at the bit where you create the company the contact is with. Am I being too anal to ask for type of company: -Select One- Doing Business As Incorporated Limited Liability Company Limited Liability Partnership National Association Limited Partnership Non-Profit Foreign Corporation Or should I just let the data entry person take care of this on the back end in Quickbooks? and if not ,,, did I miss any types? I just really misstrust data entry people lol. -- Richard Dillman [EMAIL PROTECTED] (317) 916-8341 "The most important step is always the first one." ~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241126 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=11502.10531.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
OT: CF jobs listings?
Ok, I know it's off topic but I figured you all would know. My company is looking to hire some new CF developers and are planning to post to the CF-Jobs list but we were wondering if anyone knows of other good places to post CF job openings. Anyone with experience or information would be extremely helpful. You can reply off-list to me unless you think it's pertinent to keep on the list for others. John Burns Certified Advanced ColdFusion MX Developer Wyle Laboratories, Inc. | Web Developer ~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241125 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=11502.10531.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
RE: Google Analytics?
Since it appears many here use Google Analytics, I have a question. Does anyone use it over an SSL connection (during the checkout process of a cart, for example)? I can't figure out how to use it without throwing browser security warnings (domain name does not match, etc.). Any way around this? Mike -Original Message- From: Jeff Small [mailto:[EMAIL PROTECTED] Sent: Sunday, May 21, 2006 12:29 PM To: CF-Talk Subject: Google Analytics? What is this? I got an invitation, but I'm not sure what it is. Is it more than just google's version of "web trends"? Anyone using it? ~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241124 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
RE: Possible in SQL?
I would have thought distinct would do what you want, are you sure you use dit correctly. Select distinct com1, gender, fname, lname FROM mytable WHERE gender = 'M' Group by com1, gender, fname, lname - Snake -Original Message- From: Jeremy Bunton [mailto:[EMAIL PROTECTED] Sent: 22 May 2006 13:34 To: CF-Talk Subject: Possible in SQL? Hello, I have a table that looks something like this. Com1 genderfname lname 001 M Matt Smith 001 M Bill Wright 005 FKara Brown 005 M Mike White What I need to do is pull a record from each "com1" group that meets my where criteria. Say from above I want all the males. I would want the answer to be 001 M Matt Smith 005 M Mike White Or 001 M Bill Wright 005 M Mike White I don't care which record I just want ONE per com1 id meeting the criteria. I tried using distinct but that will not work as you have to list all the field names out and then group but the none distinct ones which gives me all the com1's meeting the where criteria. Any idea's? Jeremy ~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241123 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=11502.10531.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
Re: Possible in SQL?
fixing my query...I had used used foo as the tablename originally, and not changed it in both places... select * from sometable a WHERE a.gender = 'M' AND lname = (SELECT max(lname) FROM sometable WHERE com1=a.com1) -- Jim Wright Wright Business Solutions [EMAIL PROTECTED] 919-417-2257 ~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241122 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
Re: Possible in SQL?
You could do it with a subquery select * from sometable a WHERE a.gender = 'M' AND lname = (SELECT max(lname) FROM foo WHERE com1=a.com1) (of course, this assumes that lname is unique within a com1, which may not be the case...you may need to add on a identity field to make sure you only get one value for each com1) -- Jim Wright Wright Business Solutions [EMAIL PROTECTED] 919-417-2257 ~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241121 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=11502.10531.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
Possible in SQL?
Hello, I have a table that looks something like this. Com1 genderfname lname 001 M Matt Smith 001 M Bill Wright 005 FKara Brown 005 M Mike White What I need to do is pull a record from each "com1" group that meets my where criteria. Say from above I want all the males. I would want the answer to be 001 M Matt Smith 005 M Mike White Or 001 M Bill Wright 005 M Mike White I don't care which record I just want ONE per com1 id meeting the criteria. I tried using distinct but that will not work as you have to list all the field names out and then group but the none distinct ones which gives me all the com1's meeting the where criteria. Any idea's? Jeremy ~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241120 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
Re: Google Analytics?
That's the difference between marketting and what the software actually reports. >8.5 is now version 9.0 ~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241119 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
cfprocparam cfsqltype XML ?
I have a stored proc that is returning a sql 2005 xml datatype. The sql server docs say to use LONGVARCHAR as the data type but I am getting the same error whether I call the proc from a java class or a coldfusion page. Implicit conversion from data type xml to varchar is not allowed. Anyone else run into this yet? Rich ~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241118 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=11502.10531.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
Re: How to get several resultsets from SP
On Monday 22 May 2006 12:30, Adrian Lynch wrote: > SELECT * FROM Table1 > > IF @param = 1 > SELECT * FROM Table2 > > SELECT * FROM Table3 In which case 3 result sets are returned, and one of them will be null. 3 sets are always returned because that is how the SP is defined, no ? -- Tom Chiverton This email is sent for and on behalf of Halliwells LLP. Halliwells LLP is a limited liability partnership registered in England and Wales under registered number OC307980 whose registered office address is at St James's Court Brown Street Manchester M2 2JF. A list of members is available for inspection at the registered office. Any reference to a partner in relation to Halliwells LLP means a member of Halliwells LLP. Regulated by the Law Society. CONFIDENTIALITY This email is intended only for the use of the addressee named above and may be confidential or legally privileged. If you are not the addressee you must not read it and must not use any information contained in nor copy it nor inform any person other than Halliwells LLP or the addressee of its existence or contents. If you have received this email in error please delete it and notify Halliwells LLP IT Department on 0870 365 8008. For more information about Halliwells LLP visit www.halliwells.com. We are pleased to announce that Halliwells LLP has been voted AIM Lawyer of the Year at the 2005 Growth Company Awards ~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241117 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
RE: How to get several resultsets from SP
But not what it returns. The following in an SP will potentially return two or three result sets which means your proc result tags can be askew. SELECT * FROM Table1 IF @param = 1 SELECT * FROM Table2 SELECT * FROM Table3 Adrian -Original Message- From: Tom Chiverton [mailto:[EMAIL PROTECTED] Sent: 22 May 2006 11:48 To: CF-Talk Subject: Re: How to get several resultsets from SP On Friday 19 May 2006 18:00, Adrian Lynch wrote: > Conditional logic might change the number. But the definition of a SP is fixed. -- Tom Chiverton ~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241116 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
Re: reading parent form variables
>Once you have submitted to the parent page, you could then call the >iframe using URL parameters that match your form fields... > >you submit form fields x and y to the parent page. The parent page >then calls the iframe with something like: > > I implemented the url variable variety. Thanks everyone for your help! ~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241115 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
Re: How to get several resultsets from SP
On Friday 19 May 2006 18:00, Adrian Lynch wrote: > Conditional logic might change the number. But the definition of a SP is fixed. -- Tom Chiverton This email is sent for and on behalf of Halliwells LLP. Halliwells LLP is a limited liability partnership registered in England and Wales under registered number OC307980 whose registered office address is at St James's Court Brown Street Manchester M2 2JF. A list of members is available for inspection at the registered office. Any reference to a partner in relation to Halliwells LLP means a member of Halliwells LLP. Regulated by the Law Society. CONFIDENTIALITY This email is intended only for the use of the addressee named above and may be confidential or legally privileged. If you are not the addressee you must not read it and must not use any information contained in nor copy it nor inform any person other than Halliwells LLP or the addressee of its existence or contents. If you have received this email in error please delete it and notify Halliwells LLP IT Department on 0870 365 8008. For more information about Halliwells LLP visit www.halliwells.com. We are pleased to announce that Halliwells LLP has been voted AIM Lawyer of the Year at the 2005 Growth Company Awards ~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241114 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
Re: switch from siteObject to FCKEditor
Another one to look at is: http://tinymce.moxiecode.com/
On 21/05/06, Pete Jordan <[EMAIL PROTECTED]> wrote:
> Pete Ruckelshaus wrote:
>
> > Really? Is that in the documentation somewhere, or can you provide a
> > code sample? Also, any idea if it's possible to specify the image
> > file upload path dynamically? I'm building a simple blog app and want
> > to allow users to upload to their own directories.
>
> I'm not going to promise any sort of useful details here because I know,
> from past experience, that I'm not going to find the time to package
> code up in a form in which it can be usefully shared (I owe apologies to
> people here and elsewhere for promises unfulfilled in the past).
>
> Anyhow, that said (and with the added proviso that due to tuit shortage
> we're still working on RC2 here), I really don't see where the issues
> lie with toolbar customisation: you can define as many toolbar sets as
> you like in fckconfig.js and both the supplied custom tag and CFC allow
> you to select the things per editor instance.
>
> For image upload directories, you'll have to get your hands dirty to an
> extent. I've pretty much rewritten the connectors from scratch here as
> we've integrated fckeditor into our (mod_perl/PerlMagick based) image
> auto resizing and processing code, so our code isn't likely to be of
> much direct use to you, but the connectors are where you'll need to delve.
>
> The standard (Application|Server).userFilesPath base isn't a lot of use.
> We've recoded that to (1) pick up userFilesPath more flexibly - we check
> Request, Session, Application, Client and Server in that order - and (2)
> allow userFilesPath to be a hash, keyed on connector type ('File',
> 'Image' &c) so different media can live in entirely different places.
>
> If that doesn't give you enough flexibility, then you're likely into
> more significant hacking - passing paths into the fckeditor js code and
> back out to the connectors in the xmlhttprequest. It's not rocket
> science, but you'll need to spend a bit of time sussing out how the
> protocols work as standard first. We've not needed to do this, but
> having crawled through the relevant code for other reasons, I don't
> think it would be difficult.
>
> --
> Regards,
>
> Pete Jordan
> Horus Web Engineering Ltd
> http://www.webhorus.net/
> phone: +44 1275 543971
> mobile: +44 7973 725120
>
>
~|
Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241113
Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4
Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4
Unsubscribe:
http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=11502.10531.4
Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
Re: model-glue on shared servers
I have a 'MGR' quick start on my site: http://wapurl.co.uk/?YORN902 -- Nick Tong web: http://talkwebsolutions.co.uk blog: http://succor.co.uk shorturls: http://wapurl.co.uk ~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:241112 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54
Re: model-glue on shared servers
I have a 'MGR' quick start on my site: http://wapurl.co.uk/?YORN902 On 22/05/06, dave <[EMAIL PROTECTED]> wrote: > thanks mike, i will look over these in am. > > Don't worry, it WONT be running on iis, you should know that by now!! haha > > ~Dave the disruptor~ > > > From: "Mike Kear" <[EMAIL PROTECTED]> > Sent: Monday, May 22, 2006 3:24 AM > To: CF-Talk > Subject: Re: model-glue on shared servers > > The docs for Model-Glue and for Reactor lag behind the product somewhat. > It's a struggle to keep them in synch with the product because it's moving > ahead so fast. > > I dont want to rehash the VERY LONG thread that went on the Reactor list a > while back, but I'll give you a brief synopsis > > - For running Reactor on a shared server ... DO NOT make a mapping > called "Reactor" despite what the docs say. > - Put the Reactor core files in a folder of their own under the web > root. DO NOT put them any lower than that (i.e. dont put them in a > folder wwwroot/admin/reactor they MUST go in wwwroot/reactor. It is this > folder that will contain reactorFactory.cfc) > - Make a folder where you want Reactor to create it's > application-specific auto-generated files. This folder can be anywhere > within your site, e.g. wwwroot/cfcs/reactordata > - Create a ColdFusion mapping (or ask your sysadmin to do it) pointing > to this location. The docs suggest to call it "/myApplicationData" but you > can call it whatever you like. > > If you are using Reactor in your WindowsXPPRo using IIS5.1, you can only > have one site. You can still have reactor running, but there is quite a > lot of complicatoin having several versions. So if you think you might have > several versions of Reactor on your system (e.g. different development > periods and therefore using a later rev of Reactor on one site) I strongly > suggest not using IIS. I changed to Apache for this reason and it made a > great many things easier. > > So .. supposing you decided to stick with WindowsXPPro and IIS5.1 ... ok > here's what you have to do ... > > - You will no doubt have a folder c:\inetpub\wwwroot\MySIte1 which > contains the files for your site called MySIte1. > - DO NOT put your reactor files in the folder > c:\inetpub\wwwroot\MySIte1\Reactor, which the Docs seem to say, but if you > read carefully they dont. > - Put your reactor files in the folder c:\inetpub\wwwroot\reactor\ > i.e OUTSIDE the folders relating to your site MySite1. (this means > you can only have one copy of Reactor running at a time on your WInXP > machine - there are apparently ways to have different copies but I never > figured that out) > - Create the folder for the auto-generated application files INSIDE > your site MySite1, and to take the example above your folder will be > c:\inetpub\wwwroot\MySite1\cfcs\reatordata > - Create a ColdFusion mapping pointing to this folder. The docs > suggest to call it "/myApplicationData" but you can call it whatever you > like. > - When you upload your site to the shared server, you will need to > upload BOTH the files in MySite1 AND those in the c:\inetpub\wwwroot\reactor > tree. These will be INSIDE your site on the shared server. > > This has been written from memory, so I hope it's correct in every > detail. But I can testify that it works on a shared server, but you have > to make sure you dont have a coldfusion mapping called Reactor anywhere, or > that's where the reactor will be run from, not from the files in your own > site. > > Similar principle applies to ModelGlue. > > The key is NOT to have a mapping called "/Reactor" despite what the docs > say. If the reactor folder is underneath the root of the site, it'll work, > believe me. I had it pounded into me hard enough on the Reactor list, > and I've verified it in my own experience. Hopefully the docs will be able > to catch up soon. There's a new version 2 of Model-Glue coming out soon, > and everyone (including me) would rather have the effort go into getting the > new version going properly than have it delayed waiting for documentation > for version 1.x updated. Same with reactor. Doug Hughes is up to his > armpits in things to do, and most of us would rather he spend his time > working on the product than the docs. > > Of course the docs cant wait for ever, and eventually they'll get so far > behind the product they're worthless, but for now most of us working with > Model-Glue and Reactor have figured out the quirks and are leaning in favour > of development rather than documentation for now. > > I hope this helps. > > Cheers > Mike Kear > Windsor, NSW, Australia > Certified Advanced ColdFusion Developer > AFP Webworks > http://afpwebworks.com > ColdFusion, PHP, ASP, ASP.NET hosting from AUD$15/month > > On 5/22/06, dave wrote: > > > I havent tried it yet (reactor) but my first thoughts were (on it and > > multi-model-glues) "how is sean doing it" > > On reactor I was reading the docs late last
Re: model-glue on shared servers
thanks mike, i will look over these in am. Don't worry, it WONT be running on iis, you should know that by now!! haha ~Dave the disruptor~ From: "Mike Kear" <[EMAIL PROTECTED]> Sent: Monday, May 22, 2006 3:24 AM To: CF-Talk Subject: Re: model-glue on shared servers The docs for Model-Glue and for Reactor lag behind the product somewhat. It's a struggle to keep them in synch with the product because it's moving ahead so fast. I dont want to rehash the VERY LONG thread that went on the Reactor list a while back, but I'll give you a brief synopsis - For running Reactor on a shared server ... DO NOT make a mapping called "Reactor" despite what the docs say. - Put the Reactor core files in a folder of their own under the web root. DO NOT put them any lower than that (i.e. dont put them in a folder wwwroot/admin/reactor they MUST go in wwwroot/reactor. It is this folder that will contain reactorFactory.cfc) - Make a folder where you want Reactor to create it's application-specific auto-generated files. This folder can be anywhere within your site, e.g. wwwroot/cfcs/reactordata - Create a ColdFusion mapping (or ask your sysadmin to do it) pointing to this location. The docs suggest to call it "/myApplicationData" but you can call it whatever you like. If you are using Reactor in your WindowsXPPRo using IIS5.1, you can only have one site. You can still have reactor running, but there is quite a lot of complicatoin having several versions. So if you think you might have several versions of Reactor on your system (e.g. different development periods and therefore using a later rev of Reactor on one site) I strongly suggest not using IIS. I changed to Apache for this reason and it made a great many things easier. So .. supposing you decided to stick with WindowsXPPro and IIS5.1 ... ok here's what you have to do ... - You will no doubt have a folder c:\inetpub\wwwroot\MySIte1 which contains the files for your site called MySIte1. - DO NOT put your reactor files in the folder c:\inetpub\wwwroot\MySIte1\Reactor, which the Docs seem to say, but if you read carefully they dont. - Put your reactor files in the folder c:\inetpub\wwwroot\reactor\ i.e OUTSIDE the folders relating to your site MySite1. (this means you can only have one copy of Reactor running at a time on your WInXP machine - there are apparently ways to have different copies but I never figured that out) - Create the folder for the auto-generated application files INSIDE your site MySite1, and to take the example above your folder will be c:\inetpub\wwwroot\MySite1\cfcs\reatordata - Create a ColdFusion mapping pointing to this folder. The docs suggest to call it "/myApplicationData" but you can call it whatever you like. - When you upload your site to the shared server, you will need to upload BOTH the files in MySite1 AND those in the c:\inetpub\wwwroot\reactor tree. These will be INSIDE your site on the shared server. This has been written from memory, so I hope it's correct in every detail. But I can testify that it works on a shared server, but you have to make sure you dont have a coldfusion mapping called Reactor anywhere, or that's where the reactor will be run from, not from the files in your own site. Similar principle applies to ModelGlue. The key is NOT to have a mapping called "/Reactor" despite what the docs say. If the reactor folder is underneath the root of the site, it'll work, believe me. I had it pounded into me hard enough on the Reactor list, and I've verified it in my own experience. Hopefully the docs will be able to catch up soon. There's a new version 2 of Model-Glue coming out soon, and everyone (including me) would rather have the effort go into getting the new version going properly than have it delayed waiting for documentation for version 1.x updated. Same with reactor. Doug Hughes is up to his armpits in things to do, and most of us would rather he spend his time working on the product than the docs. Of course the docs cant wait for ever, and eventually they'll get so far behind the product they're worthless, but for now most of us working with Model-Glue and Reactor have figured out the quirks and are leaning in favour of development rather than documentation for now. I hope this helps. Cheers Mike Kear Windsor, NSW, Australia Certified Advanced ColdFusion Developer AFP Webworks http://afpwebworks.com ColdFusion, PHP, ASP, ASP.NET hosting from AUD$15/month On 5/22/06, dave wrote: > I havent tried it yet (reactor) but my first thoughts were (on it and > multi-model-glues) "how is sean doing it" > On reactor I was reading the docs late last night and this is what it says > > Configuring Mappings > Once you've downloaded Reactor you will need to make a mapping named > "/Reactor" which points to the /Reactor directory you downloaded. The > reactorFactory component should be in the root of the "/Reactor" path. > > Note: You do need to na
Re: model-glue on shared servers
The docs for Model-Glue and for Reactor lag behind the product somewhat. It's a struggle to keep them in synch with the product because it's moving ahead so fast. I dont want to rehash the VERY LONG thread that went on the Reactor list a while back, but I'll give you a brief synopsis - For running Reactor on a shared server ... DO NOT make a mapping called "Reactor" despite what the docs say. - Put the Reactor core files in a folder of their own under the web root. DO NOT put them any lower than that (i.e. dont put them in a folder wwwroot/admin/reactor they MUST go in wwwroot/reactor. It is this folder that will contain reactorFactory.cfc) - Make a folder where you want Reactor to create it's application-specific auto-generated files. This folder can be anywhere within your site, e.g. wwwroot/cfcs/reactordata - Create a ColdFusion mapping (or ask your sysadmin to do it) pointing to this location. The docs suggest to call it "/myApplicationData" but you can call it whatever you like. If you are using Reactor in your WindowsXPPRo using IIS5.1, you can only have one site. You can still have reactor running, but there is quite a lot of complicatoin having several versions. So if you think you might have several versions of Reactor on your system (e.g. different development periods and therefore using a later rev of Reactor on one site) I strongly suggest not using IIS. I changed to Apache for this reason and it made a great many things easier. So .. supposing you decided to stick with WindowsXPPro and IIS5.1 ... ok here's what you have to do ... - You will no doubt have a folder c:\inetpub\wwwroot\MySIte1 which contains the files for your site called MySIte1. - DO NOT put your reactor files in the folder c:\inetpub\wwwroot\MySIte1\Reactor, which the Docs seem to say, but if you read carefully they dont. - Put your reactor files in the folder c:\inetpub\wwwroot\reactor\ i.e OUTSIDE the folders relating to your site MySite1. (this means you can only have one copy of Reactor running at a time on your WInXP machine - there are apparently ways to have different copies but I never figured that out) - Create the folder for the auto-generated application files INSIDE your site MySite1, and to take the example above your folder will be c:\inetpub\wwwroot\MySite1\cfcs\reatordata - Create a ColdFusion mapping pointing to this folder. The docs suggest to call it "/myApplicationData" but you can call it whatever you like. - When you upload your site to the shared server, you will need to upload BOTH the files in MySite1 AND those in the c:\inetpub\wwwroot\reactor tree. These will be INSIDE your site on the shared server. This has been written from memory, so I hope it's correct in every detail.But I can testify that it works on a shared server, but you have to make sure you dont have a coldfusion mapping called Reactor anywhere, or that's where the reactor will be run from, not from the files in your own site. Similar principle applies to ModelGlue. The key is NOT to have a mapping called "/Reactor" despite what the docs say. If the reactor folder is underneath the root of the site, it'll work, believe me. I had it pounded into me hard enough on the Reactor list, and I've verified it in my own experience. Hopefully the docs will be able to catch up soon. There's a new version 2 of Model-Glue coming out soon, and everyone (including me) would rather have the effort go into getting the new version going properly than have it delayed waiting for documentation for version 1.x updated. Same with reactor. Doug Hughes is up to his armpits in things to do, and most of us would rather he spend his time working on the product than the docs. Of course the docs cant wait for ever, and eventually they'll get so far behind the product they're worthless, but for now most of us working with Model-Glue and Reactor have figured out the quirks and are leaning in favour of development rather than documentation for now. I hope this helps. Cheers Mike Kear Windsor, NSW, Australia Certified Advanced ColdFusion Developer AFP Webworks http://afpwebworks.com ColdFusion, PHP, ASP, ASP.NET hosting from AUD$15/month On 5/22/06, dave <[EMAIL PROTECTED]> wrote: > I havent tried it yet (reactor) but my first thoughts were (on it and > multi-model-glues) "how is sean doing it" > On reactor I was reading the docs late last night and this is what it says > > Configuring Mappings > Once you've downloaded Reactor you will need to make a mapping named > "/Reactor" which points to the /Reactor directory you downloaded. The > reactorFactory component should be in the root of the "/Reactor" path. > > Note: You do need to name this mapping "/Reactor". Renaming this mapping > will cause problems. > > Can only feasably do 1 mapping name per server, per instructions but not > like I wont break any rules > > ~Dave the d
