Probably coming up on time for a replacement…easy job.
-D
> On Jan 20, 2022, at 4:43 PM, Dwight Giles via Mercedes
> wrote:
>
> If my memory is correct [doubtful assumption} I think I changed that
> tensioner maybe 150K miles ago.
> Dwight E. Giles Jr.
> Wickford RI
>
>
> On Thu, Jan 20, 20
If my memory is correct [doubtful assumption} I think I changed that
tensioner maybe 150K miles ago.
Dwight E. Giles Jr.
Wickford RI
On Thu, Jan 20, 2022 at 4:30 PM OK Don via Mercedes
wrote:
> The belt tensioner can rattle also, and is more likely in my experience.
> The fuel line leak I had i
The belt tensioner can rattle also, and is more likely in my experience.
The fuel line leak I had in a W115 car was where the metal line rubbed
against the chassis entering the engine compartment from below. Check the
whole length from the tank to the engine.
On Thu, Jan 20, 2022 at 3:23 PM Dimitr
Thank you all for your advice on the fuel filters. I replaced them and the car
runs fine now. Definitely a stream of bubbles in the inline filter so I will
have to check the hoses by the tank.
Unfortunately I’m now hearing a rattling noise up front by the engine. I’m of
course worried that thi
It's black - that's enough reason to salvage a car in OK, as far as I'm
concerned - - -
On Tue, Mar 29, 2016 at 2:26 PM, Kaleb C. Striplin via Mercedes <
mercedes@okiebenz.com> wrote:
> Here are some quick photos of this 2.5 I picked up last night. I looked at
> the car pretty good and see no evi
That is the best way! Then you can unplug the electrics and it won't
run your battery down! I am proud to say I have no Hirschmanns
plugged in. I quit putting new masts in about 10 yrs ago.
BTW, I have new in the bag antenna masts for 123, 124 and 126/107
cars. If anyone wants to buy one,
Antenna is broken, stuck up.
--
Max Dillon
Charleston SC
'87 300TD
'95 E300
___
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes
On 29/03/2016 5:02 PM, rogerhga--- via Mercedes wrote:
Kaleb,
I see the problem in that one picture. The car has a cat attached to the left
front wheel. The humane society will never let you drive the car. Sad you've
been taken. Sell it cheap quickly and don't spread the pictures around.
Best W
Kaleb,
I see the problem in that one picture. The car has a cat attached to the left
front wheel. The humane society will never let you drive the car. Sad you've
been taken. Sell it cheap quickly and don't spread the pictures around.
Best Wishes,
Roger
Roger Hale
Dinnerware Classics, Inc.
M
I had a leak between #3 and #4 IFIRC, on the old 300D, discovered
when I pulled the head. Also leaked in a couple of other places --
PLEASE use new head bolts when you do a gasket change! The bolts may
not have stretched too much "by the book", but the failure rate is
too high to suit me
If the gasket is blown between the cylinders, you will have very low
compression on both. BTDT.
Peter
___
http://www.okiebenz.com
For new and used parts go to www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or chang
On Thu, 30 Dec 2010 17:43:59 -0600 "Kaleb C. Striplin"
wrote:
> I loosened the lines today and it seems to me like the problem is
> with #4 and #5. It just does not seem like a blown gasket to me
> but maybe it is
Sure would hate to pull the head and find out differently!
Would a compression
rom: Craig
Sent: Dec 28, 2010 10:43 PM
To: mercedes@okiebenz.com
Subject: Re: [MBZ] 2.5 turbo problem
On Tue, 28 Dec 2010 21:51:46 -0600 "Kaleb C. Striplin"
wrote:
Wife calls this morning says the car is running rough and has no
power. She gets to work and says there is smoke pouri
I have never run into that before, guess I would have to pull the
injectors to tell
On 12/29/2010 8:51 PM, OK Don wrote:
I wonder if a pre-chamber self-distructed?
On Wed, Dec 29, 2010 at 6:08 PM, Kaleb C. Striplinwrote:
I have seen a number of these 2.5 and 2.2 engines blow out all the sudd
I wonder if a pre-chamber self-distructed?
On Wed, Dec 29, 2010 at 6:08 PM, Kaleb C. Striplin wrote:
> I have seen a number of these 2.5 and 2.2 engines blow out all the sudden,
> and its a definate oil smoke and usually oil blowing out the back. The
> exhaust definately does not smell like oil
e for a stock engine (original 1986 300SDL) if you need one.
Peter
-Original Message-
From: Craig
Sent: Dec 28, 2010 10:43 PM
To: mercedes@okiebenz.com
Subject: Re: [MBZ] 2.5 turbo problem
On Tue, 28 Dec 2010 21:51:46 -0600 "Kaleb C. Striplin"
wrote:
Wife calls this morning says th
yea, thats the plan
On 12/28/2010 10:43 PM, Craig wrote:
On Tue, 28 Dec 2010 21:51:46 -0600 "Kaleb C. Striplin"
wrote:
Wife calls this morning says the car is running rough and has no
power. She gets to work and says there is smoke pouring out the
back. My immediate thought is the head gas
e chain case, likely you also have a
bent #1 rod and subsequent cylinder damage. We do have 5 rods and pistons
available for a stock engine (original 1986 300SDL) if you need one.
Peter
-Original Message-
>From: Craig
>Sent: Dec 28, 2010 10:43 PM
>To: mercedes@okiebenz.com
On Tue, 28 Dec 2010 21:51:46 -0600 "Kaleb C. Striplin"
wrote:
> Wife calls this morning says the car is running rough and has no
> power. She gets to work and says there is smoke pouring out the
> back. My immediate thought is the head gasket blew between #1 and
> timing chain. I go pick it
Wife calls this morning says the car is running rough and has no
power. She gets to work and says there is smoke pouring out the
back. My immediate thought is the head gasket blew between #1 and
timing chain. I go pick it up just now and it starts right up and
its cutting out/missing, and it
[mailto:mercedes-boun...@okiebenz.com] On Behalf Of Kaleb C. Striplin
Sent: Sunday, December 13, 2009 7:09 PM
To: mercedes Mailing List
Subject: [MBZ] 2.5 turbo noisy lifters
On my 90 2.5 I have been driving a little, it has at least a couple of
noisy lifters, I did change the oil and used mobile 1 to try
en it just disappeared...
Weird.
-Curt
Date: Sun, 13 Dec 2009 18:08:41 -0600
From: "Kaleb C. Striplin"
Subject: [MBZ] 2.5 turbo noisy lifters
To: mercedes Mailing List
Message-ID: <4b258209.2090...@striplin.net>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
On my 90
Did you replace the two o-rings on the center bolt in the oil filter
housing? When those go bad, they let the oil drain out of the oil
gallery overnight, and it takes ages to re-fill the tappets.
Otherwise, they do go bad, and you may need to replace them.
Takes a few weeks of driving to ge
On my 90 2.5 I have been driving a little, it has at least a couple of
noisy lifters, I did change the oil and used mobile 1 to try and quiet
them down. When sitting at idle, the things seems to tick, will go
away, start ticking again etc. Wonder how long it will take the M1 to
clean these th
D. Its probably stripped...
-Curt
Date: Sun, 01 Nov 2009 17:59:08 -0600
From: "Kaleb C. Striplin"
Subject: [MBZ] 2.5 turbo alternator adventure
To: mercedes Mailing List
Message-ID: <4aee20cc.2050...@striplin.net>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
I was
Kaleb C. Striplin wrote:
how would I know. With the regulator in there that works, all the
lights lite up now.
OK, so it was the regulator, not the fuses.
___
http://www.okiebenz.com
For new and used parts go to www.okiebenz.com
To search list archives http
how would I know. With the regulator in there that works, all the
lights lite up now.
Mitch Haley wrote:
If you have no dash lights, how is the initial field current supposed
to go through the alternator indicator lamp to the regulator to make
the alternator work?
Mitch.
__
yea, but I would still like to get that bolt out.
WILTON wrote:
Don't drain it - suck it out via the dipstick tube.
Wilton
- Original Message - From: "Kaleb C. Striplin"
To: "mercedes Mailing List"
Sent: Sunday, November 01, 2009 6:59 PM
Subject: [
If you have no dash lights, how is the initial field current supposed to go
through the alternator indicator lamp to the regulator to make the alternator work?
Mitch.
___
http://www.okiebenz.com
For new and used parts go to www.okiebenz.com
To search list arc
Don't drain it - suck it out via the dipstick tube.
Wilton
- Original Message -
From: "Kaleb C. Striplin"
To: "mercedes Mailing List"
Sent: Sunday, November 01, 2009 6:59 PM
Subject: [MBZ] 2.5 turbo alternator adventure
So a few weeks ago messing with my
So a few weeks ago messing with my new 90 2.5, I discover it is not
charging. I swap in a different regulator and it still does not
charge. The regulator that was on there had really short brushes, the
one I put on had long ones. Anyway, I go to pull the alternator only to
discover the lower
No idea, but am interested in what you find out
On Sat, Apr 11, 2009 at 8:40 PM, Kaleb C. Striplin wrote:
> Anybody ever tried to see if a radiator out of a 124 2.5 turbo will fit in
> a 95 E300? I know the EPC lists a different part number, and I am going to
> put them side by side to comp
exactly
Craig McCluskey wrote:
On Sat, 11 Apr 2009 20:40:45 -0500 "Kaleb C. Striplin"
wrote:
Anybody ever tried to see if a radiator out of a 124 2.5 turbo will fit
in a 95 E300? I know the EPC lists a different part number, and I am
going to put them side by side to compare, but Im just wo
On Sat, 11 Apr 2009 20:40:45 -0500 "Kaleb C. Striplin"
wrote:
> Anybody ever tried to see if a radiator out of a 124 2.5 turbo will fit
> in a 95 E300? I know the EPC lists a different part number, and I am
> going to put them side by side to compare, but Im just wondering what
> differences,
Anybody ever tried to see if a radiator out of a 124 2.5 turbo will fit
in a 95 E300? I know the EPC lists a different part number, and I am
going to put them side by side to compare, but Im just wondering what
differences, if any, there is between the 2. Or for that matter, from a
87 300D.
-
http://cgi.ebay.com/ebaymotors/Mercedes-w124-260E-300E-E320-300D-diesel-style-fender_W0QQitemZ200247480940QQihZ010QQcategoryZ33644QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
--
Kaleb C. Striplin/Claremore, OK
92 300SD, 92 300E 4Matic, 91 300D, 91 300E, 89 560SEL,
87 300SDL x2, 86 560SL, 86 300E, 85
No odometer right now -- busted. However, I used 9.6 gallons of fuel
from Evansville, IN to Ft. Wayne and 9.4 on the way back (n the rain),
according to Mapquest it's almost exactly 300 miles point to point.
The old one got 38-29 all the time (accurate odometer and speedo),
jumped up a bit whe
That's the case in my 300D, the speedo reads 2 - 3 mph higher than
any of my other cars, based on a school zone radar sign that displays
your speed as you drive past.
Allan
On Jan 2, 2008, at 12:56 PM, Kaleb C. Striplin, work wrote:
> Maybe his odometer is not correct, maybe its too fast
>
>
I dont have enough patience to drive like you do :)
---
Kaleb C. Striplin
Cox Auto Trader
730-Tulsa FSBO Supervisor
- Original Message -
From: "Peter Frederick" <[EMAIL PROTECTED]>
To: "Mercedes Discussion List"
Sent: Wednesday, January 02, 2008 11:50 AM
Su
Maybe his odometer is not correct, maybe its too fast
---
Kaleb C. Striplin
Cox Auto Trader
730-Tulsa FSBO Supervisor
- Original Message -
From: "Alex Chamberlain" <[EMAIL PROTECTED]>
To: "Mercedes Discussion List"
Sent: Wednesday, January 02, 2008 11:20 AM
Su
I will freely admit to being a sedate driver -- I refuse to be in much of a
hurry for anything anymore, it's too much hassle.
However, here is what I usually do to keep fuel consumption down:
light throttle until the 1-2 upshift, then add power.
Keep the rear tires as 36 psi, rides a bit hard
On Dec 31, 2007 7:20 PM, Kaleb C. Striplin <[EMAIL PROTECTED]> wrote:
> 31-32 with a 603, what is your secret? Do you drive it like an old lady?
>
>
My thoughts exactly. Marshall always said that 30 mpg was at the high end
of what you could get with a 603 car, and required steady 60-mph highway
Hey, I grew up (well, spent my first 20 yr or so) in Ft Wayne, have not
really been back in about that many years. How is the old fort?
--R
Peter Frederick wrote:
> Fairly gently, usually not over 60 on the highway to work (60 mph speed
> limit). Ran right at 30 mpg on my trip to Fr. Wayne, I
LarryT wrote:
> Went thru the same thing with my 91 300D 2.5T and finally found a way to put
> a Alpine CD changer in the trunk and continue using the MB Head Unit in the
> dash and the Amp and Tuner in the trunk. If that's what you are trying to
> get to let me know and I'll tell you what I di
://members.rennlist.com/oil
PORSCHE POSTERS! youroil.net
Weber Carb Info http://members.rennlist.com/webercarbs
.
- Original Message -
From: "Kaleb C. Striplin" <[EMAIL PROTECTED]>
To: "mercedes Mailing List"
Sent: Monday, December 31, 2007 4:07 PM
Subject: [MBZ] 2.5
ttp://members.rennlist.com/oil
PORSCHE POSTERS! youroil.net
Weber Carb Info http://members.rennlist.com/webercarbs
.
- Original Message -
From: "John Robbins" <[EMAIL PROTECTED]>
To: "Mercedes Discussion List"
Sent: Monday, December 31, 2007 10:09 PM
Subject: Re:
Pretty much just go with the traffic, although I am a gentle driver.
Mostly open road around here, but it doesn't matter much with diesels
-- they don't loose that much milage in town unless you get stuck it
slow traffic jams.
I don't floor it, though.
Peter
Fairly gently, usually not over 60 on the highway to work (60 mph speed
limit). Ran right at 30 mpg on my trip to Fr. Wayne, IN for
Thanksgiving this year, too running 75 or so most of the way.
I got 29 highway even driving hard in the old one.
Peter
On Dec 31, 2007, at 9:09 PM, John Robbins w
31-32 with a 603, what is your secret? Do you drive it like an old lady?
Peter Frederick wrote:
> Gee, that's rotten milage -- I get 31-32 in my 300D with a 603! I'd
> expect more like 34 with the 2.5L in fairly flat territory!
>
> I agree about butchering the factory wiring -- all the major
I get 29 in town, and 33 at 75 mph on the interstates.
On Dec 31, 2007 9:09 PM, John Robbins <[EMAIL PROTECTED]> wrote:
> Peter Frederick wrote:
> > Gee, that's rotten milage -- I get 31-32 in my 300D with a 603! I'd
> > expect more like 34 with the 2.5L in fairly flat territory!
>
> How aggressi
Peter Frederick wrote:
> Gee, that's rotten milage -- I get 31-32 in my 300D with a 603! I'd
> expect more like 34 with the 2.5L in fairly flat territory!
How aggressive do you drive? I get 29-31 on the highway going ~80 in my
2.5T
> I agree about butchering the factory wiring -- all the majo
Gee, that's rotten milage -- I get 31-32 in my 300D with a 603! I'd
expect more like 34 with the 2.5L in fairly flat territory!
I agree about butchering the factory wiring -- all the major
manufacturers of aftermarket stuff these days make conversion harnesses
that just plug into the factory o
Wickford, RI
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Kaleb C. Striplin
Sent: Monday, December 31, 2007 4:08 PM
To: mercedes Mailing List
Subject: [MBZ] 2.5 turbo
Been driving the 140 diesel for a while. Had the center console apart
on the 92 300D fixing
Been driving the 140 diesel for a while. Had the center console apart
on the 92 300D fixing the cig lighter, was not working. Discoverd it
was not hooked up. Anyway, put car back together and drove it today to
work. It needed to be filled up so I filled it up and got 29.8 mpg.
WOW. The 2.5
Hey Kaleb, the price is lower than I remember on the DTI timing unit.
Call them up and ask if it works with MBZ. Only around $500
with 5mm and 6mm pickups.
http://tinytach.com/design/timing.php
The Ferret 765 that I have lists for $239. Before Ferret became a part of
GXT they would sell refurbs
John Robbins wrote:
>
> The dynamic tool puts a sensor in that port instead of the "feelers"
> (similar to an ABS sensor). You also have to hook up the tach signal,
> etc. This not only checks the basic timing, but can check the timing
> advance device (since you can change the RPMs etc). I'v
Kaleb C. Striplin, work wrote:
> Any of them I have seen for sale is the 2 led deal.
Rusty has those... PN: 617-589-08-21-00
IIRC it was close to $300.
___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used
n List"
Sent: Monday, November 12, 2007 11:16 AM
Subject: Re: [MBZ] 2.5 turbo IP
> Kaleb C. Striplin, work wrote:
>> Whats the other one with the engine running? I have not looked at/paid
>> attention to the tools used on the 60x engines too much.
>
> There is a little ton
Head bolt tool, pre-chamber knockout tool, and timing chain slide rail puller.
Luther
On Mon, 12 Nov 2007 11:03:21 -0600, John Robbins <[EMAIL PROTECTED]> wrote:
> Luther wrote:
>> Was a one time/used sale from a list member. Included the other
>> tools needed to do the OM60x head R&R.
>
> Oh w
Kaleb C. Striplin, work wrote:
> Whats the other one with the engine running? I have not looked at/paid
> attention to the tools used on the 60x engines too much.
There is a little tong on a flywheel internal to the IP. There is a
little port on the side of the IP and when the tong is in the c
Trader
> 730-Tulsa FSBO Supervisor
>
> - Original Message -
> From: "Luther" <[EMAIL PROTECTED]>
> To: "Mercedes Discussion List"
> Sent: Monday, November 12, 2007 11:01 AM
> Subject: Re: [MBZ] 2.5 turbo IP
>
>
>
--
Luther KB5QHU
cedes Discussion List"
Sent: Monday, November 12, 2007 11:04 AM
Subject: Re: [MBZ] 2.5 turbo IP
> Kaleb C. Striplin, work wrote:
>> I need to get one badly, as many of these thigns as I work on, I do for
>> sure.
>
> You can get the RIV tool from Rusty (the one where y
November 12, 2007 11:01 AM
Subject: Re: [MBZ] 2.5 turbo IP
> Was a one time/used sale from a list member. Included the other tools
> needed to do the OM60x head R&R.
>
>
> On Mon, 12 Nov 2007 10:50:25 -0600, John Robbins <[EMAIL PROTECTED]>
> wrote:
>
>>
Kaleb C. Striplin, work wrote:
> I need to get one badly, as many of these thigns as I work on, I do for
> sure.
You can get the RIV tool from Rusty (the one where you time it with the
engine off). It was less than $300 I think. It is really expensive for
what it is though...
John
Luther wrote:
> Was a one time/used sale from a list member. Included the other
> tools needed to do the OM60x head R&R.
Oh well... How many other tools did you need to do the head job?
___
http://www.okiebenz.com
For new parts see official list sponsor: ht
Was a one time/used sale from a list member. Included the other tools needed
to do the OM60x head R&R.
On Mon, 12 Nov 2007 10:50:25 -0600, John Robbins <[EMAIL PROTECTED]> wrote:
> Luther wrote:
>> My source is sealed, but it was a great deal.
>
> Is it the fully electronic dynamic (with engin
12, 2007 10:50 AM
Subject: Re: [MBZ] 2.5 turbo IP
> Luther wrote:
>> My source is sealed, but it was a great deal.
>
> Is it the fully electronic dynamic (with engine running) tester? Does
> your source have any more?
>
> John
>
>
> __
Luther wrote:
> My source is sealed, but it was a great deal.
Is it the fully electronic dynamic (with engine running) tester? Does
your source have any more?
John
___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.co
Well if anybody finds one for sale, let me know.
---
Kaleb C. Striplin
Cox Auto Trader
730-Tulsa FSBO Supervisor
- Original Message -
From: "Luther" <[EMAIL PROTECTED]>
To: "Mercedes Discussion List"
Sent: Monday, November 12, 2007 10:21 AM
Subject: Re: [MBZ]
t;
> - Original Message -
> From: "Luther" <[EMAIL PROTECTED]>
> To: "Mercedes Discussion List"
> Sent: Monday, November 12, 2007 10:17 AM
> Subject: Re: [MBZ] 2.5 turbo IP
>
>
>> Electronic.
>>
>> On Mon, 12 Nov 2007 09:58:19
Where did yuo get that? I need to get one of those
---
Kaleb C. Striplin
Cox Auto Trader
730-Tulsa FSBO Supervisor
- Original Message -
From: "Luther" <[EMAIL PROTECTED]>
To: "Mercedes Discussion List"
Sent: Monday, November 12, 2007 10:17 AM
Subje
r" <[EMAIL PROTECTED]>
> To: "Mercedes Discussion List"
> Sent: Monday, November 12, 2007 9:50 AM
> Subject: Re: [MBZ] 2.5 turbo IP
>
>
>> Did I need to loan you that too?? Geeze.
>>
>> On Sat, 10 Nov 2007 19:42:43 -0600, Kaleb C. Striplin <[EM
you have the timing tool?
---
Kaleb C. Striplin
Cox Auto Trader
730-Tulsa FSBO Supervisor
- Original Message -
From: "Luther" <[EMAIL PROTECTED]>
To: "Mercedes Discussion List"
Sent: Monday, November 12, 2007 9:50 AM
Subject: Re: [MBZ] 2.5 turbo IP
> Di
Did I need to loan you that too?? Geeze.
On Sat, 10 Nov 2007 19:42:43 -0600, Kaleb C. Striplin <[EMAIL PROTECTED]> wrote:
> Well got that rebuilt IP installed, and it fired right up. It is
> however missing and I have too much smoke (blue/grey) Was idling
> perfect with the old pump and no smo
Yea, I had it a 15 ATDC. How do I check to see if the timer is set
properly? This is my first outing with a IP deal.
Peter Frederick wrote:
> 15 ATDC, not BTDC. The actual injection starts at 24 or 26 BTDC, just
> like the older injection pumps, but the nipple on the governor drive
> were t
15 ATDC, not BTDC. The actual injection starts at 24 or 26 BTDC, just
like the older injection pumps, but the nipple on the governor drive
were the locking tool fits lines up with the tool at 15 ATDC.
Make sure the pump is NOT 180 degrees out -- they will actually run
that way (fuel sprayed in
Its loud and smoky, before its was quiet and smooth. As I mentioned it
is missing, I loosened each line and I was not really able to say it was
coming from any certain cylinder, so thats why Im thinking the timing
has to be off. I did have it locked with the tool, and the engine
sitting at 15
I don't see why not, they are adjusted that way with the electronic
tool!
Lots of noise or very quiet and smoky? If you run it til it warms up,
late timing will give you excessive smoke at high speeds but quiet
idle, too fast will give you excessive idle noise warm and smoke at low
speeds, ty
Well got that rebuilt IP installed, and it fired right up. It is
however missing and I have too much smoke (blue/grey) Was idling
perfect with the old pump and no smoke. Im going to assume its not
timed exactly spot on. Can I loosen the the bolts and adjust the pump a
little while its runni
the little old lady drove 202 k miles since the car was new...
On 1/20/07, Kaleb C. Striplin, Cox Auto Trader <[EMAIL PROTECTED]>
wrote:
http://stlouis.craigslist.org/car/262556118.html
___
http://www.okiebenz.com
For new parts see official list sponsor: http
http://stlouis.craigslist.org/car/262556118.html
From [EMAIL PROTECTED] Sat Jan 20 18:51:36 2007
Received: from smtp-out3.atlngahp.sys.nuvox.net ([70.43.63.20]
helo=smtp03.atlngahp.sys.nuvox.net)
by server8.arterytc8.net with esmtps (TLSv1:AES256-SHA:256)
(Exim 4.52) id 1H8L
With headlights on, activate windshield washer
Sunil Hari wrote:
I'm pretty sure that the gassers got the headlight wipers standard, but the
diesels had them as an option that no one paid for.
My 92 300D doesn't have them either, and it was bought in Cincinnati.
Question: if you have them, h
The headlight wipers was an option actually. I have seen quite a few
without them. In fact, more without than with.
Werner Fehlauer wrote:
Looks like a decent car, although the description is slightly in error -
these cars typically came with MBTex, not leather and the window sticker
confir
My 91 doesn;t have the headlight washers either - I read somewhere (maybe
on the CarFax?) - they were optional on diesels - standard on the more
expensive models -
My understanding- headlight wipers were standard on the 300e, didn't
come on the 2.6 liter models like mine. That's fine, makes l
On my '87 SDL, they turn on when the headlights are on, and you
activate the windshield washer. - They only turn on when they might be
needed - no special switch - totally transparent operation - good MB
engineering!
Question: if you have them, how do you turn them on? I test drove one and
loo
300D 2.5t 135K miles
Wickford, RI
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of LarryT
Sent: Monday, January 01, 2007 9:10 PM
To: Mercedes Discussion List
Subject: Re: [MBZ] 2.5 turbo
My 91 doesn;t have the headlight washers either - I read somewhere
Werner,
You're correct on the mpg -I get about 31-32 on my 90 300D 2.5t. Mine does
not have the headlight washers-but most I see around seem to.
Dwight
Dwight E. Giles, Jr.
1979 240D-250K + miles
1990 300D 2.5t 135K miles
Wickford, RI. More typical is 30-32, so with these small
inconsistencie
, 2007 8:06 PM
Subject: Re: [MBZ] 2.5 turbo
FWIW - my '90 doesn't have headlight washers either. I think it's a
normal channel car.
Oh, also unusual is
the lack of headlight washers, which so far I've only seen one '90 (mine)
that did not have them, but mine was a &qu
4x4
- Original Message -
From: "OK Don" <[EMAIL PROTECTED]>
To: "Mercedes Discussion List"
Sent: Monday, January 01, 2007 8:06 PM
Subject: Re: [MBZ] 2.5 turbo
> FWIW - my '90 doesn't have headlight washers either. I think it's a
> normal chan
rcedes Discussion List"
Sent: Monday, January 01, 2007 8:06 PM
Subject: Re: [MBZ] 2.5 turbo
FWIW - my '90 doesn't have headlight washers either. I think it's a
normal channel car.
Oh, also unusual is
the lack of headlight washers, which so far I've only seen one '90
FWIW - my '90 doesn't have headlight washers either. I think it's a
normal channel car.
Oh, also unusual is
the lack of headlight washers, which so far I've only seen one '90 (mine)
that did not have them, but mine was a "zone car" so not in the normal
pipeline of imports by MBUSA.
--
OK Don,
http://cgi.ebay.com/ebaymotors/Mercedes-Benz-300-Series-90-Mercedes-300D-Turbo-Diesel-like-new-LOW-RESERVE_W0QQitemZ200063997039QQihZ010QQcategoryZ6330QQrdZ1QQcmdZViewItem
--
Kaleb C. Striplin/Claremore, OK
(2x) 91 300D 2.5 Turbo, 90 420SEL, 89 560SEL,
87 300SDL, 85 380SE 5.0 Euro, 84 190D 2.2,
On Fri, 15 Dec 2006, Kaleb C. Striplin wrote:
> not had any trouble before. When we had our big snow storm, I started
> it up that thursday to move it around a bit, then it sat till the next
> monday. When I tried to start it then it was dead as a doornail.
> Figured the cold and it sitting dr
I went to Lowes and got Rustoleum primer, and some silver. Turned out
that the silver was "bright", and the directions stated that "bright"
is not for outdoors use. Since I do plan on leaving these wheels
outside, I then sprayed them with two coats of clear - Krylon I think
- that reduced the "bri
Congrats! It will be a really nice car when you're through. The wheels
are a nice new silver color now - just need to get tires this week,
and I'll be ready to drive the SLC --- let me know when you're ready
for me to come up and test drive the other '91300D2.5.
On 12/17/06, Kaleb C. Striplin <[E
Well replacing #3 glowplug with manifold in place went alot easier than
#2. I think I will be able to replace any of the 1-5 with the manifold
in place now. Next, moved on to replace the oil pressure sending unit
since the guage pegs as soon as the key is turned on. Tried 3 different
ones an
Was the charger unplugged? Cables hooked up in reverse?
Kevin in Hillsboro, OR
1983 300SD 264K miles, Ursula
yes, and my light stuck off I think.
Craig McCluskey wrote:
On Fri, 15 Dec 2006 18:21:20 -0600 "Kaleb C. Striplin"
<[EMAIL PROTECTED]> wrote:
Well, now that its dark, I just went out to check the status of the
battery charging. After a little diagnostic work, I found the problem.
Anybody
On Fri, 15 Dec 2006 18:21:20 -0600 "Kaleb C. Striplin"
<[EMAIL PROTECTED]> wrote:
>
> Well, now that its dark, I just went out to check the status of the
> battery charging. After a little diagnostic work, I found the problem.
> Anybody care to guess what it was?
A light stuck on somewhere.
dome light
Mitch Haley wrote:
"Kaleb C. Striplin" wrote:
Well, now that its dark, I just went out to check the status of the
battery charging. After a little diagnostic work, I found the problem.
Anybody care to guess what it was?
Exterior lights or interior lights?
__
1 - 100 of 144 matches
Mail list logo