RE:
Hi there I had that a while back . Check if the 3Com puts the right route(leased line) back into the routing table after the backup dial gets terminated . We had such a problem so you might want to do some floating static routes to get all back to normal . Good luck ! Cheers Olden -Original Message- From: Tommy Lee [mailto:[EMAIL PROTECTED]] Sent: Friday, November 24, 2000 9:13 AM To: [EMAIL PROTECTED] Subject: Hello Have anybody integrated 3Com with CIsco on Dial Backup. I have integrated 3Com Router NetBuilder's Office Connect with Cisco 3661 over dedicated link and it is working fine. Now I am facing some problem on Dial Backup from Cisco to 3Com or otherwise. Any suggestions? Thanks in advance. T.Lee __ Do You Yahoo!? Yahoo! Shopping - Thousands of Stores. Millions of Products. http://shopping.yahoo.com/ _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
VPN in CCIE LAB?
Somebody told me that VPN appeared on LAB. Is that true? _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: setting username and passwords for router logon in telnet
how about the username? thanks anyway --- Tony van Ree [EMAIL PROTECTED] wrote: Try this assumes you already have an enable passowrd set. router#(config)line vty 0 4 router#(config-line)password (password) router#(config-line)cntl z and set the enable password router#(config)enable password (password) All this stuff is available on the Cisco CD and or config manuals. Teunis Hobart, Tasmania Australia. On Thursday, November 23, 2000 at 06:46:39 PM, suaveguru wrote: hi anyone knows what's the command to set username and password for router logon for telnet suave guru __ Do You Yahoo!? Yahoo! Shopping - Thousands of Stores. Millions of Products. http://shopping.yahoo.com/ _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] -- www.tasmail.com __ Do You Yahoo!? Yahoo! Shopping - Thousands of Stores. Millions of Products. http://shopping.yahoo.com/ _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
VPN in CCIE LAB?
Somebody told me that VPN appeared on LAB. Is that true? _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
VPN in CCIE LAB?
Somebody told me that VPN appeared on LAB. Is that true? _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: How to Config DSU/CSU....
Title: RE: How to Config DSU/CSU An external CSU/DSU isn't configured within the router. It's usually configured either through the front panel display or via DIP switches. You'll want to verify at least three things on your CSU: line speed (number of channels), framing (ESF/D4), and line coding (B8ZS/AMI). You may also need to configure clocking, bit robbing, etc. It will help you immensely to have a manual for your CSU available. You may want to check the manufacturer's website, if they have one. Good luck! - Don -Original Message- From: Minh Vu [mailto:[EMAIL PROTECTED]] Sent: Thursday, November 23, 2000 10:12 PM To: '[EMAIL PROTECTED]' Subject: How to Config DSU/CSU Hi, How do I config EXTERNAL DSU/CSU on 1005 and 2501, I tried to simulate 56k link across those two, but I couldn't find the command or how to config this, before I was used cross-over between those two. The cross-over between two DSU/CSU was working (its display linked @56k) Here is my layout: 1005---DSU/CSUxDSU/CSU2501 DSU/CSU :Motorola 3512 IOS: 11.3.11aT1 here is int s0 of 2501 config: interface Serial1 ip address 50.0.0.1 255.0.0.0 no keepalive ! note I using HDLC encap. !note with this 2501 config, I got Serial1 is up, line protocol is up here is 1005 config interface Serial0 ip address 50.0.0.2 255.0.0.0 no ip mroute-cache bandwidth 56000 fair-queue 64 256 0 ! also using HDLC encap. !note with this 1005 config, I got Serial0 is up, line protocol is down Anyone have sample config on EXTERNAL DSU/CSU. I looked thru cisco site, they just have sample for INTERNAL only, which I don't have those command (ie: service-module , and T1-controller). Thanks _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: CID beta gone?
http://www.cisco.com/warp/public/10/wwtraining/certprog/testing/beta_exams.h tm it's still there ""ERIC BRATAGER"" [EMAIL PROTECTED] ÓÏÏÂÝÉÌ/ÓÏÏÂÝÉÌÁ × ÎÏ×ÏÓÔÑÈ ÓÌÅÄÕÀÝÅÅ: [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... I went to the Cisco website to get the information regarding this beta, but it is no longer listed. Are they no longer offering this beta or am I just looking in the wrong place? _ Get more from the Web. FREE MSN Explorer download : http://explorer.msn.com _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: EIGRP Mystery??
Could be anything to do with the bandwidth statements on each of the four interfaces concerned? EIGRP will use up to 50% of the bandwidth for updates. It is the bandwidth statement on the interface that determines what that figure is. If they do not match within a NBMA you can see adjacency losses even when all the ciruits are good. see: http://www.cisco.com/warp/public/103/12.html Quote: "It is particularly critical to configure NBMA interfaces correctly, because otherwise many EIGRP packets may be lost in the switched network. There are three basic rules: The traffic that EIGRP is allowed to send on a single virtual circuit (VC) cannot exceed the capacity of that virtual circuit. The total EIGRP traffic for all virtual circuits cannot exceed the access line speed of the interface. The bandwidth allowed for EIGRP on each virtual circuit must be the same in each direction. " HTH Ben --- Brian [EMAIL PROTECTED] wrote: can you replicate this? did you capture any debug output? brian On Wed, 22 Nov 2000, dennis rufolo wrote: Does anyone have a suggestion or solution??? Frame Relay hub and spoke network. 2 central site 3640's each with a T1(on each) set to dlci 900 on one and dlci 901 on the other. 85 remote locations, 1750's 56k wic1s 32k CIR. 42 mapped to dlci 900- 43 mapped to dlci 901. We are using eigrp on a 10.0.0.0 network.HERE is the question. ( by the way I have a current open T.A.C. case and they seem to be stumped) 4 remote locations dropped from our network. couldn't ping, telnet, or pass traffic--YET the show frame pvc # command on both the hub(3640) and the spokes(1750) showed ACTIVE. We were able to dial into the remote routers. After looking at all the obvious we tried to map a STATIC route and bang!!! the circuit came right back. Why is this needed at all when we are using eigrp? Why only on these 4? I would appreciate any ideas. Thanks Dennis Rufolo Ewing Irrigation Products Phoenix,Az. = Ben Lovegrove, CCNP (+ Security) Redspan Solutions Ltd http://www.redspan.com http://www.bensbookmarks.com Cisco: Products, Training, Jobs, Study Guides, Resources. Do You Yahoo!? Get your free @yahoo.co.uk address at http://mail.yahoo.co.uk or your free @yahoo.ie address at http://mail.yahoo.ie _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
CCDA case study
Does anyone here know where I can get the CCDA case study beside from sitamoht. thx. moerdo ,CCNA _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
the problem about dialing in the remote network/cisco2620
I can't dial in the remote network,when it is saying "it is checking username and password",the system tells me that the remote network doesnot have response for it,why? i use debug ppp auth,debug modem and debug ppp nego,the result is : 05:15:20: tty1: Modem: IDLE-READY 05:15:22: %LINK-3-UPDOWN: Interface Serial0/0, changed state to up 05:15:22: Se0/0 PPP: Treating connection as a dedicated line 05:15:22: Se0/0 PPP: Phase is ESTABLISHING, Active Open 05:15:22: Se0/0 LCP: O CONFREQ [Closed] id 30 len 24 05:15:22: Se0/0 LCP: ACCM 0x000A (0x0206000A) 05:15:22: Se0/0 LCP: AuthProto PAP (0x0304C023) 05:15:22: Se0/0 LCP: MagicNumber 0xB1850FE1 (0x0506B1850FE1) 05:15:22: Se0/0 LCP: PFC (0x0702) 05:15:22: Se0/0 LCP: ACFC (0x0802) 05:15:23: TTY36: autoconfigure probe started 05:15:23: TTY38: autoconfigure probe started 05:15:23: TTY39: autoconfigure probe started 05:15:23: TTY40: autoconfigure probe started 05:15:23: TTY35: autoconfigure probe started 05:15:24: Se0/0 LCP: TIMEout: State REQsent 05:15:24: Se0/0 LCP: O CONFREQ [REQsent] id 31 len 24 05:15:24: Se0/0 LCP: ACCM 0x000A (0x0206000A) 05:15:24: Se0/0 LCP: AuthProto PAP (0x0304C023) 05:15:24: Se0/0 LCP: MagicNumber 0xB1850FE1 (0x0506B1850FE1) 05:15:24: Se0/0 LCP: PFC (0x0702) 05:15:24: Se0/0 LCP: ACFC (0x0802) 05:15:26: Se0/0 LCP: TIMEout: State REQsent 05:15:26: Se0/0 LCP: O CONFREQ [REQsent] id 32 len 24 05:15:26: Se0/0 LCP: ACCM 0x000A (0x0206000A) 05:15:26: Se0/0 LCP: AuthProto PAP (0x0304C023) 05:15:26: Se0/0 LCP: MagicNumber 0xB1850FE1 (0x0506B1850FE1) 05:15:26: Se0/0 LCP: PFC (0x0702) 05:15:26: Se0/0 LCP: ACFC (0x0802) 05:15:28: Se0/0 LCP: TIMEout: State REQsent 05:15:28: Se0/0 LCP: O CONFREQ [REQsent] id 33 len 24 05:15:28: Se0/0 LCP: ACCM 0x000A (0x0206000A) 05:15:28: Se0/0 LCP: AuthProto PAP (0x0304C023) 05:15:28: Se0/0 LCP: MagicNumber 0xB1850FE1 (0x0506B1850FE1) 05:15:28: Se0/0 LCP: PFC (0x0702) 05:15:28: Se0/0 LCP: ACFC (0x0802) 05:15:30: Se0/0 LCP: TIMEout: State REQsent 05:15:30: Se0/0 LCP: O CONFREQ [REQsent] id 34 len 24 05:15:30: Se0/0 LCP: ACCM 0x000A (0x0206000A) 05:15:30: Se0/0 LCP: AuthProto PAP (0x0304C023) 05:15:30: Se0/0 LCP: MagicNumber 0xB1850FE1 (0x0506B1850FE1) 05:15:30: Se0/0 LCP: PFC (0x0702) 05:15:30: Se0/0 LCP: ACFC (0x0802) 05:15:32: Se0/0 LCP: TIMEout: State REQsent 05:15:32: Se0/0 LCP: O CONFREQ [REQsent] id 35 len 24 05:15:32: Se0/0 LCP: ACCM 0x000A (0x0206000A) 05:15:32: Se0/0 LCP: AuthProto PAP (0x0304C023) 05:15:32: Se0/0 LCP: MagicNumber 0xB1850FE1 (0x0506B1850FE1) 05:15:32: Se0/0 LCP: PFC (0x0702) 05:15:32: Se0/0 LCP: ACFC (0x0802) 05:15:34: Se0/0 LCP: TIMEout: State REQsent 05:15:34: Se0/0 LCP: O CONFREQ [REQsent] id 36 len 24 05:15:34: Se0/0 LCP: ACCM 0x000A (0x0206000A) 05:15:34: Se0/0 LCP: AuthProto PAP (0x0304C023) 05:15:34: Se0/0 LCP: MagicNumber 0xB1850FE1 (0x0506B1850FE1) 05:15:34: Se0/0 LCP: PFC (0x0702) 05:15:34: Se0/0 LCP: ACFC (0x0802) 05:15:36: Se0/0 LCP: TIMEout: State REQsent 05:15:36: Se0/0 LCP: O CONFREQ [REQsent] id 37 len 24 05:15:36: Se0/0 LCP: ACCM 0x000A (0x0206000A) 05:15:36: Se0/0 LCP: AuthProto PAP (0x0304C023) 05:15:36: Se0/0 LCP: MagicNumber 0xB1850FE1 (0x0506B1850FE1) 05:15:36: Se0/0 LCP: PFC (0x0702) 05:15:36: Se0/0 LCP: ACFC (0x0802) 05:15:38: Se0/0 LCP: TIMEout: State REQsent 05:15:38: Se0/0 LCP: O CONFREQ [REQsent] id 38 len 24 05:15:38: Se0/0 LCP: ACCM 0x000A (0x0206000A) 05:15:38: Se0/0 LCP: AuthProto PAP (0x0304C023) 05:15:38: Se0/0 LCP: MagicNumber 0xB1850FE1 (0x0506B1850FE1) 05:15:38: Se0/0 LCP: PFC (0x0702) 05:15:38: Se0/0 LCP: ACFC (0x0802) 05:15:40: Se0/0 LCP: TIMEout: State REQsent 05:15:40: Se0/0 LCP: O CONFREQ [REQsent] id 39 len 24 05:15:40: Se0/0 LCP: ACCM 0x000A (0x0206000A) 05:15:40: Se0/0 LCP: AuthProto PAP (0x0304C023) 05:15:40: Se0/0 LCP: MagicNumber 0xB1850FE1 (0x0506B1850FE1) 05:15:40: Se0/0 LCP: PFC (0x0702) 05:15:40: Se0/0 LCP: ACFC (0x0802) 05:15:42: Se0/0 LCP: TIMEout: State REQsent 05:15:42: Se0/0 LCP: O CONFREQ [REQsent] id 40 len 24 05:15:42: Se0/0 LCP: ACCM 0x000A (0x0206000A) 05:15:42: Se0/0 LCP: AuthProto PAP (0x0304C023) 05:15:42: Se0/0 LCP: MagicNumber 0xB1850FE1 (0x0506B1850FE1) 05:15:42: Se0/0 LCP: PFC (0x0702) 05:15:42: Se0/0 LCP: ACFC (0x0802) 05:15:42: TTY37: autoconfigure probe started 05:15:44: Se0/0 LCP: TIMEout: State REQsent 05:15:44: TTY1: Async Int reset: Dropping DTR 05:15:44: Se0/0 LCP: State is Listen 05:15:45: TTY1: DSR was dropped 05:15:45: tty1: Modem: READY-HANGUP 05:15:46: %LINK-5-CHANGED: Interface Serial0/0, changed state to reset 05:15:46: Se0/0 LCP: State is Closed 05:15:46: Se0/0 PPP: Phase is DOWN 05:15:46: Se0/0 IPCP: Remove route to 10.179.224.2 05:15:46: TTY1: dropping DTR, hanging up 05:15:46: tty1: Modem: HANGUP-IDLE 05:15:47: TTY1: cleanup pending. Delaying DTR 05:15:48: TTY1: cleanup pending. Delaying DTR 05:15:49: TTY1: destroy timer type 0 05:15:49: TTY1: destroy timer type 1 05:15:49: TTY1: destroy timer type 3 05:15:49: TTY1:
CCNP study materials
Hi all, I am very badly looking for the Cisco Power point slide of the BCMSN exam. I have all the slides and lot of other studying materials including ebooks for BCRAN, BSCN, CIT and CCIE written exam. Waiting for your response, Xavier -- Sent through GMX FreeMail - http://www.gmx.net _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
what's the means of the debug message?
it is a 2620,act as an access-server,but it doesnot work,when I debug the ppp neo/auth and modem,it tell me : 06:51:16: TTY1: DSR came up 06:51:16: tty1: Modem: IDLE-READY 06:51:16: TTY1: EXEC creation 06:51:16: TTY1: set timer type 10, 30 seconds 06:51:17: TTY1: Autoselect(2) sample F3 06:51:17: TTY1: Autoselect(2) sample F367 06:51:17: TTY1: Autoselect(2) sample F36770 06:51:20: TTY1: Autoselect(2) sample F36770BB 06:51:20: TTY1: Autoselect(2) sample 6770BB10 06:51:20: TTY1: Autoselect(2) sample 70BB100B 06:51:20: TTY1: Autoselect(2) sample BB100BFC 06:51:20: TTY1: Autoselect(2) sample 100BFCED 06:51:23: TTY1: Autoselect(2) sample BFCED67 06:51:23: TTY1: Autoselect(2) sample FCED67B8 06:51:23: TTY1: Autoselect(2) sample ED67B8FE 06:51:26: TTY1: Autoselect(2) sample 67B8FEBB 06:51:26: TTY1: Autoselect(2) sample B8FEBB10 06:51:26: TTY1: Autoselect(2) sample FEBB10EB 06:51:26: TTY1: Autoselect(2) sample BB10EBFE 06:51:26: TTY1: Autoselect(2) sample 10EBFE67 06:51:26: TTY1: Autoselect(2) sample EBFE67F0 06:51:26: TTY1: Autoselect(2) sample FE67F0FF 06:51:29: TTY1: Autoselect(2) sample 67F0FFF8 06:51:29: TTY1: Autoselect(2) sample F0FFF8FC 06:51:29: TTY1: Autoselect(2) sample FFF8FCE0 06:51:29: TTY37: autoconfigure probe started 06:51:32: TTY1: Autoselect(2) sample F8FCE0BB 06:51:32: TTY1: Autoselect(2) sample FCE0BBF0 06:51:32: TTY1: Autoselect(2) sample E0BBF0FF 06:51:32: TTY1: Autoselect(2) sample BBF0 06:51:32: TTY1: Autoselect(2) sample F0FA 06:51:35: TTY1: Autoselect(2) sample FAFE 06:51:35: TTY1: Autoselect(2) sample FFFAFEFF 06:51:36: TTY36: autoconfigure probe started 06:51:36: TTY39: autoconfigure probe started 06:51:36: TTY40: autoconfigure probe started 06:51:36: TTY38: autoconfigure probe started 06:51:36: TTY35: autoconfigure probe started 06:51:38: TTY1: Autoselect(2) sample FAFEFFBB 06:51:38: TTY1: Autoselect(2) sample FEFFBB10 06:51:38: TTY1: Autoselect(2) sample FFBB10EE 06:51:38: TTY1: Autoselect(2) sample BB10EEF0 06:51:38: TTY1: Autoselect(2) sample 10EEF0FF 06:51:38: TTY1: Autoselect(2) sample EEF0FFFE 06:51:41: TTY1: Autoselect(2) sample F0FFFEFC 06:51:41: TTY1: Autoselect(2) sample FFFEFCE8 06:51:41: TTY1: Autoselect(2) sample FEFCE8F9 06:51:44: TTY1: Autoselect(2) sample FCE8F9EE 06:51:44: TTY1: Autoselect(2) sample E8F9EEFE 06:51:44: TTY1: Autoselect(2) sample F9EEFEEF 06:51:46: TTY1: timer type 10 expired 06:51:46: TTY1: timer type 10 expired 06:51:46: TTY1: set timer type 10, 30 seconds 06:51:53: TTY1: Autoselect(2) sample EEFEEF22 06:51:53: TTY1: Autoselect(2) sample FEEF2250 06:51:53: TTY1: Autoselect(2) sample EF2250FD 06:51:54: TTY1: DSR was dropped 06:51:54: TTY1: Quickly dropping DTR 06:51:54: tty1: Modem: READY-CARDROP 06:51:55: TTY37: autoconfigure probe started 06:51:56: TTY1: Line reset by "Exec" 06:51:56: TTY1: Modem: CARDROP-HANGUP 06:51:56: TTY1: destroy timer type 0 06:51:56: TTY1: destroy timer type 1 06:51:56: TTY1: destroy timer type 3 06:51:56: TTY1: destroy timer type 4 06:51:56: TTY1: destroy timer type 2 06:51:57: TTY1: dropping DTR, hanging up 06:51:57: tty1: Modem: HANGUP-IDLE 06:52:02: TTY1: restoring DTR _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: setting username and passwords for router logon in telnet
conf t username "username" password "password" simple as that steve From: suaveguru [EMAIL PROTECTED] Reply-To: suaveguru [EMAIL PROTECTED] To: Tony van Ree [EMAIL PROTECTED],William Gragido [EMAIL PROTECTED], Chris A [EMAIL PROTECTED], [EMAIL PROTECTED] Subject: Re: setting username and passwords for router logon in telnet Date: Fri, 24 Nov 2000 00:56:37 -0800 (PST) how about the username? thanks anyway --- Tony van Ree [EMAIL PROTECTED] wrote: Try this assumes you already have an enable passowrd set. router#(config)line vty 0 4 router#(config-line)password (password) router#(config-line)cntl z and set the enable password router#(config)enable password (password) All this stuff is available on the Cisco CD and or config manuals. Teunis Hobart, Tasmania Australia. On Thursday, November 23, 2000 at 06:46:39 PM, suaveguru wrote: hi anyone knows what's the command to set username and password for router logon for telnet suave guru __ Do You Yahoo!? Yahoo! Shopping - Thousands of Stores. Millions of Products. http://shopping.yahoo.com/ _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] -- www.tasmail.com __ Do You Yahoo!? Yahoo! Shopping - Thousands of Stores. Millions of Products. http://shopping.yahoo.com/ _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ Get more from the Web. FREE MSN Explorer download : http://explorer.msn.com _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: the problem about dialing in the remote network/cisco2620
it sounds like you have either a misconfiged (username/password) or missconfiged auth ...try changing your config line to "ppp auth chap pap" see what happens steve From: "cslx" [EMAIL PROTECTED] Reply-To: "cslx" [EMAIL PROTECTED] To: [EMAIL PROTECTED] Subject: the problem about dialing in the remote network/cisco2620 Date: Fri, 24 Nov 2000 18:38:42 +0800 I can't dial in the remote network,when it is saying "it is checking username and password",the system tells me that the remote network doesnot have response for it,why? i use debug ppp auth,debug modem and debug ppp nego,the result is : 05:15:20: tty1: Modem: IDLE-READY 05:15:22: %LINK-3-UPDOWN: Interface Serial0/0, changed state to up 05:15:22: Se0/0 PPP: Treating connection as a dedicated line 05:15:22: Se0/0 PPP: Phase is ESTABLISHING, Active Open 05:15:22: Se0/0 LCP: O CONFREQ [Closed] id 30 len 24 05:15:22: Se0/0 LCP: ACCM 0x000A (0x0206000A) 05:15:22: Se0/0 LCP: AuthProto PAP (0x0304C023) 05:15:22: Se0/0 LCP: MagicNumber 0xB1850FE1 (0x0506B1850FE1) 05:15:22: Se0/0 LCP: PFC (0x0702) 05:15:22: Se0/0 LCP: ACFC (0x0802) 05:15:23: TTY36: autoconfigure probe started 05:15:23: TTY38: autoconfigure probe started 05:15:23: TTY39: autoconfigure probe started 05:15:23: TTY40: autoconfigure probe started 05:15:23: TTY35: autoconfigure probe started 05:15:24: Se0/0 LCP: TIMEout: State REQsent 05:15:24: Se0/0 LCP: O CONFREQ [REQsent] id 31 len 24 05:15:24: Se0/0 LCP: ACCM 0x000A (0x0206000A) 05:15:24: Se0/0 LCP: AuthProto PAP (0x0304C023) 05:15:24: Se0/0 LCP: MagicNumber 0xB1850FE1 (0x0506B1850FE1) 05:15:24: Se0/0 LCP: PFC (0x0702) 05:15:24: Se0/0 LCP: ACFC (0x0802) 05:15:26: Se0/0 LCP: TIMEout: State REQsent 05:15:26: Se0/0 LCP: O CONFREQ [REQsent] id 32 len 24 05:15:26: Se0/0 LCP: ACCM 0x000A (0x0206000A) 05:15:26: Se0/0 LCP: AuthProto PAP (0x0304C023) 05:15:26: Se0/0 LCP: MagicNumber 0xB1850FE1 (0x0506B1850FE1) 05:15:26: Se0/0 LCP: PFC (0x0702) 05:15:26: Se0/0 LCP: ACFC (0x0802) 05:15:28: Se0/0 LCP: TIMEout: State REQsent 05:15:28: Se0/0 LCP: O CONFREQ [REQsent] id 33 len 24 05:15:28: Se0/0 LCP: ACCM 0x000A (0x0206000A) 05:15:28: Se0/0 LCP: AuthProto PAP (0x0304C023) 05:15:28: Se0/0 LCP: MagicNumber 0xB1850FE1 (0x0506B1850FE1) 05:15:28: Se0/0 LCP: PFC (0x0702) 05:15:28: Se0/0 LCP: ACFC (0x0802) 05:15:30: Se0/0 LCP: TIMEout: State REQsent 05:15:30: Se0/0 LCP: O CONFREQ [REQsent] id 34 len 24 05:15:30: Se0/0 LCP: ACCM 0x000A (0x0206000A) 05:15:30: Se0/0 LCP: AuthProto PAP (0x0304C023) 05:15:30: Se0/0 LCP: MagicNumber 0xB1850FE1 (0x0506B1850FE1) 05:15:30: Se0/0 LCP: PFC (0x0702) 05:15:30: Se0/0 LCP: ACFC (0x0802) 05:15:32: Se0/0 LCP: TIMEout: State REQsent 05:15:32: Se0/0 LCP: O CONFREQ [REQsent] id 35 len 24 05:15:32: Se0/0 LCP: ACCM 0x000A (0x0206000A) 05:15:32: Se0/0 LCP: AuthProto PAP (0x0304C023) 05:15:32: Se0/0 LCP: MagicNumber 0xB1850FE1 (0x0506B1850FE1) 05:15:32: Se0/0 LCP: PFC (0x0702) 05:15:32: Se0/0 LCP: ACFC (0x0802) 05:15:34: Se0/0 LCP: TIMEout: State REQsent 05:15:34: Se0/0 LCP: O CONFREQ [REQsent] id 36 len 24 05:15:34: Se0/0 LCP: ACCM 0x000A (0x0206000A) 05:15:34: Se0/0 LCP: AuthProto PAP (0x0304C023) 05:15:34: Se0/0 LCP: MagicNumber 0xB1850FE1 (0x0506B1850FE1) 05:15:34: Se0/0 LCP: PFC (0x0702) 05:15:34: Se0/0 LCP: ACFC (0x0802) 05:15:36: Se0/0 LCP: TIMEout: State REQsent 05:15:36: Se0/0 LCP: O CONFREQ [REQsent] id 37 len 24 05:15:36: Se0/0 LCP: ACCM 0x000A (0x0206000A) 05:15:36: Se0/0 LCP: AuthProto PAP (0x0304C023) 05:15:36: Se0/0 LCP: MagicNumber 0xB1850FE1 (0x0506B1850FE1) 05:15:36: Se0/0 LCP: PFC (0x0702) 05:15:36: Se0/0 LCP: ACFC (0x0802) 05:15:38: Se0/0 LCP: TIMEout: State REQsent 05:15:38: Se0/0 LCP: O CONFREQ [REQsent] id 38 len 24 05:15:38: Se0/0 LCP: ACCM 0x000A (0x0206000A) 05:15:38: Se0/0 LCP: AuthProto PAP (0x0304C023) 05:15:38: Se0/0 LCP: MagicNumber 0xB1850FE1 (0x0506B1850FE1) 05:15:38: Se0/0 LCP: PFC (0x0702) 05:15:38: Se0/0 LCP: ACFC (0x0802) 05:15:40: Se0/0 LCP: TIMEout: State REQsent 05:15:40: Se0/0 LCP: O CONFREQ [REQsent] id 39 len 24 05:15:40: Se0/0 LCP: ACCM 0x000A (0x0206000A) 05:15:40: Se0/0 LCP: AuthProto PAP (0x0304C023) 05:15:40: Se0/0 LCP: MagicNumber 0xB1850FE1 (0x0506B1850FE1) 05:15:40: Se0/0 LCP: PFC (0x0702) 05:15:40: Se0/0 LCP: ACFC (0x0802) 05:15:42: Se0/0 LCP: TIMEout: State REQsent 05:15:42: Se0/0 LCP: O CONFREQ [REQsent] id 40 len 24 05:15:42: Se0/0 LCP: ACCM 0x000A (0x0206000A) 05:15:42: Se0/0 LCP: AuthProto PAP (0x0304C023) 05:15:42: Se0/0 LCP: MagicNumber 0xB1850FE1 (0x0506B1850FE1) 05:15:42: Se0/0 LCP: PFC (0x0702) 05:15:42: Se0/0 LCP: ACFC (0x0802) 05:15:42: TTY37: autoconfigure probe started 05:15:44: Se0/0 LCP: TIMEout: State REQsent 05:15:44: TTY1: Async Int reset: Dropping DTR 05:15:44: Se0/0 LCP: State is Listen 05:15:45: TTY1: DSR was dropped 05:15:45: tty1: Modem: READY-HANGUP 05:15:46: %LINK-5-CHANGED: Interface Serial0/0, changed state to reset 05:15:46: Se0/0 LCP: State is Closed 05:15:46: Se0/0
Re: Ethernet Frame (revisited for clarification)
If you look at the frame format for any LAN protocol you will see where the Destination and Source MAC address are. You will not see these in any of the WAN frame formats. I looked on CCO for more information to clarify this but was unsuccessful. What I did look at was the frame formats for different WAN protocols. Here some links to show you what I am talking about: SDLC http://www.cisco.com/univercd/cc/td/doc/cisintwk/ito_doc/sdlcetc.htm#xtocid2 49413 Frame Relay http://www.cisco.com/univercd/cc/td/doc/cisintwk/ito_doc/frame.htm#41825 X.25 http://www.cisco.com/univercd/cc/td/doc/cisintwk/ito_doc/x25.htm#xtocid12273 10 Ethernet http://www.cisco.com/univercd/cc/td/doc/cisintwk/ito_doc/ethernet.htm#xtocid 118335 Token Ring http://www.cisco.com/univercd/cc/td/doc/cisintwk/ito_doc/tokenrng.htm#xtocid 73166 FDDI http://www.cisco.com/univercd/cc/td/doc/cisintwk/ito_doc/fddi.htm#xtocid1028 610 If you look at http://www.cisco.com/univercd/cc/td/doc/cisintwk/ito_doc/introwan.htm you will see that where the WAN technologies lay in the OSI model and hopefully this will also explain why serial lines don't have MAC addresses. The reason that LAN protocols have a MAC address and WAN's don't is because LAN's are contention based where WAN's are always full-duplex. Even though layer 2 switching has been around for LAN's for a few years now the protocols have stayed the same for backwards compatibility. Neil "John Green" [EMAIL PROTECTED] wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... this post(s) was posted a couple of days back and just wanted some more list memebers to see if this correct before we take this as gospel truth. --- Neil Desai [EMAIL PROTECTED] wrote: To my knowledge serial links don't have a MAC address. Since most of them are either a point-to-point or point-to-multipoint there are some other type of mappings. If a serial port needs a MAC address it usuall uses one from another interface that has one (i.e. ethernet). Neil ""Martinez, Carlos"" [EMAIL PROTECTED] wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... hello all, I had somebody ask me what the source mac address would be on a frame sent across a serial link connected by to two routers, for example: Host A sends a packet to Host B, which is on the other side of the wan link. what would Host B see and what where would he send his reply to.(the local router or Host A or what) thanks in advance _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] __ Do You Yahoo!? Yahoo! Shopping - Thousands of Stores. Millions of Products. http://shopping.yahoo.com/ _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
study tests
I found that www.thetestpage.net/engine has some pretty good study tests available for only $15 each _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: CCNP study materials
Dear sir, I have bcmsn ppt,but I want your ebook about CCIE,can you give me? henry "Zahid Hassan" [EMAIL PROTECTED] wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Hi all, I am very badly looking for the Cisco Power point slide of the BCMSN exam. I have all the slides and lot of other studying materials including ebooks for BCRAN, BSCN, CIT and CCIE written exam. Waiting for your response, Xavier -- Sent through GMX FreeMail - http://www.gmx.net _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
ROUTER BREAKIN
Chaps, I have been given a 2500 series router to configure which I need to break into. There are no passwords given. I am trying to make a console connection but it asks for the password. Could anyone point me in the right direction? Many thanks. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Info on CID 640-025
Does anyone have any info on the content of the CID 640-025 without braking the NDA. I have not ever used Appletalk and I am trying to decide how much I need to understand it. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
BGP Command
All, I have recently been on a BGP course. I am slightly unsure about the effects of the command below, clear ip bgp * Looking at the command ref on CCO, it suggests that it causes the Router to drop all of its neighbor BGP sessions. On the course, the instructor said there were more disasterous effects to the internet, is this correct ? If so what precausions should you take to protect against this. Steve Steven Dangerfield, Network Engineer/Analyst B.Eng, CCNA, CCSA Email : [EMAIL PROTECTED] Totalise - the Users ISP - To become a member and a shareholder visit http://www.totalise.net --- "Improve your Exam Grades, while getting a financial reward. Visit Examboost at http://www.examboost.co.uk" _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: ROUTER BREAKIN
Try this link: http://www.cisco.com/warp/public/474/index.shtml Look under Access Products : Cisco 2500 Series Routers ""Larry Ogun-Banjo"" [EMAIL PROTECTED] wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Chaps, I have been given a 2500 series router to configure which I need to break into. There are no passwords given. I am trying to make a console connection but it asks for the password. Could anyone point me in the right direction? Many thanks. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: ROUTER BREAKIN
Larry, You can go to Cisco web site. There you can search for a procedure called 'password recovery'. Raheem From: "Larry Ogun-Banjo" [EMAIL PROTECTED] Reply-To: "Larry Ogun-Banjo" [EMAIL PROTECTED] To: [EMAIL PROTECTED] Subject: ROUTER BREAKIN Date: Fri, 24 Nov 2000 15:15:46 +0100 Chaps, I have been given a 2500 series router to configure which I need to break into. There are no passwords given. I am trying to make a console connection but it asks for the password. Could anyone point me in the right direction? Many thanks. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ Get more from the Web. FREE MSN Explorer download : http://explorer.msn.com _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: ROUTER BREAKIN
Many thanks to all who responded. I forgot to inform you that I had tried a lot of keyboard combinations that did not work. Thanx to those who directed me to changing the baud rate. This did the trick. Special thanks to Marcia O. and Tom Evans. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: How to Config DSU/CSU....
The protocol down on the 1005 is because of the no keepalive on the 2501. Rodgers Moore "Minh Vu" [EMAIL PROTECTED] wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Hi, How do I config EXTERNAL DSU/CSU on 1005 and 2501, I tried to simulate 56k link across those two, but I couldn't find the command or how to config this, before I was used cross-over between those two. The cross-over between two DSU/CSU was working (its display linked @56k) Here is my layout: 1005---DSU/CSUxDSU/CSU2501 DSU/CSU :Motorola 3512 IOS: 11.3.11aT1 here is "int s0" of 2501 config: interface Serial1 ip address 50.0.0.1 255.0.0.0 no keepalive ! note I using HDLC encap. !note with this 2501 config, I got Serial1 is up, line protocol is up here is 1005 config interface Serial0 ip address 50.0.0.2 255.0.0.0 no ip mroute-cache bandwidth 56000 fair-queue 64 256 0 ! also using HDLC encap. !note with this 1005 config, I got Serial0 is up, line protocol is down Anyone have sample config on EXTERNAL DSU/CSU. I looked thru cisco site, they just have sample for INTERNAL only, which I don't have those command (ie: service-module , and T1-controller). Thanks _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: BGP Command
On Fri, 24 Nov 2000, Steven Dangerfield wrote: All, I have recently been on a BGP course. I am slightly unsure about the effects of the command below, clear ip bgp * Looking at the command ref on CCO, it suggests that it causes the Router to drop all of its neighbor BGP sessions. On the course, the instructor said there were more disasterous effects to the internet, is this correct ? Well every router that carries to global bgp table will have those routes removed, and then have those routes re-added when your bgp peer session comes back up. If so what precausions should you take to protect against this. Well, just don't do it :). Seriously, unless you have too. If you just need to clear a single peer, then clear ip bgp x.x.x.x . Also you can run "soft reconfig" with your peers so that when changes are made, effects to the routers can be minimalized. Running "soft reconfig" requires you to keep an additional copy of the BGP table, and when you run multiple peers this can add up.but if you have the memory, its a good idea. Brian Steve Steven Dangerfield, Network Engineer/Analyst B.Eng, CCNA, CCSA Email : [EMAIL PROTECTED] Totalise - the Users ISP - To become a member and a shareholder visit http://www.totalise.net --- "Improve your Exam Grades, while getting a financial reward. Visit Examboost at http://www.examboost.co.uk" _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] --- Brian Feeny, CCNP, CCDP [EMAIL PROTECTED] Network Administrator ShreveNet Inc. (ASN 11881) _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
OT: BGP and RPSL for Dummies
We are quickly moving to multi-homing with two separate providers using BGP. One of the providers requires us to register our AS info with a routing registry and I've chosen ARIN's registry for this. My problem is that even after reading everything I can find about RPSL, I'm still a tad confused about which objects I need to register. We are going to be using the address space assigned by one of the providers. Because of that, it appears to me that we only need to register three objects: maintainer, AS, and route. Is that the case? I see no need for any others, but I'm very new to this. Do any of you have experience with this? Is there an RPSL for Newbies out there? I've read the RFCs and they are very helpful, but I'm still unsure of myself here. TIA, John ___ Tired of slow Internet? Get @Home Broadband Internet http://www.home.com/xinbox/signup.html _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: ROUTER BREAKIN
Hey Larry, Try the url below.. http://www.cisco.com/warp/public/474/pswdrec_2500.html#proc Kerry How is the job -Original Message- From: Larry Ogun-Banjo [mailto:[EMAIL PROTECTED]] Sent: 24 November 2000 2:16 PM To: [EMAIL PROTECTED] Subject: ROUTER BREAKIN Chaps, I have been given a 2500 series router to configure which I need to break into. There are no passwords given. I am trying to make a console connection but it asks for the password. Could anyone point me in the right direction? Many thanks. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] This message has been checked for all known viruses, by Star Internet, delivered through the MessageLabs Virus Control Centre. For further information visit: http://www.star.net.uk/stats.asp _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: ROUTER BREAKIN
Many thanks to all who responded. I forgot to inform you that I had tried a lot of keyboard combinations that did not work. Thanx to those who directed me to changing the baud rate. This did the trick.Many thanks to all who responded. I forgot to inform you that I had tried a lot of keyboard combinations that did not work. Thanx to those who directed me to changi the baud rate. This did the trick. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: BGP Command
Hello Steve, Both statements are correct; clear ip bgp * resets all BGP sessions in the router simultaneously. Thanks/Brgds Faruq MCSE, CCNA, (CCNP to be :)) Steven Dangerfield wrote: All, I have recently been on a BGP course. I am slightly unsure about the effects of the command below, clear ip bgp * Looking at the command ref on CCO, it suggests that it causes the Router to drop all of its neighbor BGP sessions. On the course, the instructor said there were more disasterous effects to the internet, is this correct ? If so what precausions should you take to protect against this. Steve Steven Dangerfield, Network Engineer/Analyst B.Eng, CCNA, CCSA Email : [EMAIL PROTECTED] Totalise - the Users ISP - To become a member and a shareholder visit http://www.totalise.net --- "Improve your Exam Grades, while getting a financial reward. Visit Examboost at http://www.examboost.co.uk" _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: setting username and passwords for router logon in telnet
Hi Syntax: username priv 7 thru 15 password y then on the VTY lines no password login local HTH -- John Hardman CCNP MCSE+I "suaveguru" [EMAIL PROTECTED] wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... hi anyone knows what's the command to set username and password for router logon for telnet suave guru __ Do You Yahoo!? Yahoo! Shopping - Thousands of Stores. Millions of Products. http://shopping.yahoo.com/ _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: BGP and RPSL for Dummies
Hi I was facing this myself in the last couple of weeks, I posted to a couple of the Cisco news groups, talked to several engineers and came up with, "unless your provider requires it, don't bother". There are quite a few web sites/pages out there that deal with IRR, but none of the ones I found actually say when one needs or should use an IRR. The best thing I can recommend is to talk to the BGP engineers from both of your providers and see what they say. HTH -- John Hardman CCNP MCSE+I "John Neiberger" [EMAIL PROTECTED] wrote in message 17476811.975083277954.JavaMail.imail@tiptoe">news:17476811.975083277954.JavaMail.imail@tiptoe... We are quickly moving to multi-homing with two separate providers using BGP. One of the providers requires us to register our AS info with a routing registry and I've chosen ARIN's registry for this. My problem is that even after reading everything I can find about RPSL, I'm still a tad confused about which objects I need to register. We are going to be using the address space assigned by one of the providers. Because of that, it appears to me that we only need to register three objects: maintainer, AS, and route. Is that the case? I see no need for any others, but I'm very new to this. Do any of you have experience with this? Is there an RPSL for Newbies out there? I've read the RFCs and they are very helpful, but I'm still unsure of myself here. TIA, John ___ Tired of slow Internet? Get @Home Broadband Internet http://www.home.com/xinbox/signup.html _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Cisco Certification Digest V2 #828
Isn't there a command to suppress the annoying "00:01:35: % SYS-5-CONFIG_i: Configured from console by console" line and dramatic pause every time you exit the config term? I was so happy to learn the "no ip domain-lookup" command to suppress the pause every time you mistype a command, but this one still stumps me. You help is appreciated. Thanks... I believe the command you are seeking is actually "logging synchronous". Here's a quick snippet on how to configure it and how it works. First, without logging synchronous you have this(I apologize up front for any word wrap): cisco804(config)#^Z cisco804# 16w4d: %SYS-5-CONFIG_I: Configured from console by consolesh aliases Exec mode aliases: h help lologout p ping r resume s show u undebug unundebug w where cisco804# Note that the command "sh aliases" appears immediately after the "Configured from console by console" message on the same line. Sometimes the command you typed will wrap to the next line. Here is how to turn on logging synchronous: cisco804#conf t Enter configuration commands, one per line. End with CNTL/Z. cisco804(config)#lin con 0 cisco804(config-line)#logg syn cisco804(config-line)#^Z cisco804# Now watch how the same command looks when one of two scenarios come up. The first is when I start typing the command I want as soon as I get to priviledged mode: cisco804#sh ali 16w4d: %SYS-5-CONFIG_I: Configured from console by console cisco804#sh aliases Exec mode aliases: h help lologout p ping r resume s show u undebug unundebug w where cisco804# Notice that I started typing the command, "sh aliases", I was interrupted by a console logging message. As soon as the log message was over, it *immediately put me back where I was typing and allowed me to finish my command. Here is the same command under a slightly different set of parameters. This time, I pause before typing the command: cisco804(config)#^Z cisco804# 16w4d: %SYS-5-CONFIG_I: Configured from console by console cisco804#sh aliases Exec mode aliases: h help lologout p ping r resume s show u undebug unundebug w where cisco804# Notice that my entire command appears on the next line (not after the word console as before). Finally, one last point on the use of the command "no logging console" to accomplish this objective. It is true that "no logging console" will stop those annoying console messages that keep interrupting you when you are working. In addiition, they will also stop these annoying messages as well: cisco804#16w4d: %SYS-5-CONFIG_I: core meltdown expected in 10 seconds. Eject the core or realign the phase converters:-) In all seriousness, don't expect any logging to work at the console when using that method, including access list violations, reboot warnings, etc. HTH, Paul Werner Get your own "800" number - Free Free voicemail, fax, email, and a lot more http://www.ureach.com/reg/tag _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: CIPT 2.0 - flapping CAT 6608
Changing IOS maybe ??? Have you make any research about bugs ? Regards - Original Message - From: "peter whittle" [EMAIL PROTECTED] Newsgroups: groupstudy.cisco To: [EMAIL PROTECTED] Sent: Friday, November 24, 2000 12:13 AM Subject: CIPT 2.0 - flapping CAT 6608 Hi, I am working towards CIPT 2.0 (Cisco Call Manager v3.0) exam. I have a CAT 6K in the core with 6608 (8 port E1 blade) as per the CIPT LABs. The problem is that the 6608 resets itself after about 40 S, making it very difficult to complete a call over the E1 link. It seems to help if I disable the unused (un-terminated) E1 ports. However, the 6608 still resets itself all be it not quite so frequently. I have tried a 2nd SUP 1A 2GE card, a different PSU and a different 6608 blade - all without success! Any ideas? Thanks Peter _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
More HSRP
Hey Group! After reading Cisco's HSRP on CCO, there is still something that is not clear. At the moment I have a situation where there are 2 routers, configured for HSRP. So, each has a prime ip address and three secondary addresses which are all configured with HSRP addresses. So, to summarize, there are 4 subnets configured. When I do a "sh arp" on RtrA, - all HSRP addresses show the same virtual mac subnets for RtrB (in RtrA's arp table) are different. 2 subnets appear as "incomplete" and the other two show up with the bia of the interface. At the moment RtrA is the active router. So my question is this. does the standby router use it's own bia? (while on standby?) and, what does "incomplete" mean in the arp table? Also an interesting observation. The HSRP addresses are configured on hosts as the default gateway. When you ping the HSRP address, it responds ok. But when I do a traceroute to another network through the gateway, the physical address is shown in the trace, not the HSRP address. Could this not be a bit confusing?? Kevin Wigle _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Connecting Routers
Folks: I am considering the CCDA exam and I have one queston. Consider teh following scenario: If I have two routers separated by: a few yards, a few hundred or thousand yards, a few hundred miles. How are these routers connected in the above three scenarios and what part does a TELCO play, if any. Thanks , John. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: New Questions
- Original Message - From: "Tim Lovelace" [EMAIL PROTECTED] To: "cisco" [EMAIL PROTECTED] Sent: Wednesday, November 22, 2000 4:16 PM Subject: New Questions Greetings. I am new to the list. I am currently working on my CCNP and then I will be going to the CCIE. I am in the process of trying to purchase all the needed lab equipment. I was wondering if anyone had any recommended vendors where I can get some decent equipment cheap, or if anyone had any used equipment for sale. Any help would be appreciated. Also, my next test will be the Switching test. So far I think I am fairly ready for it but was wondering if anyone had any tips or recommended study areas for it before I take the test. Thanks. Get the BCSN book from the Cisco Press ! This is the only way to pass the exam Tim _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Connecting Routers
Try the Internetworking Technology Overview from Cisco. It's online here: http://www.cisco.com/univercd/cc/td/doc/cisintwk/ito_doc/index.htm Priscilla At 12:10 PM 11/24/00, JohnMail wrote: Folks: I am considering the CCDA exam and I have one queston. Consider teh following scenario: If I have two routers separated by: a few yards, a few hundred or thousand yards, a few hundred miles. How are these routers connected in the above three scenarios and what part does a TELCO play, if any. Thanks , John. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Priscilla Oppenheimer http://www.priscilla.com _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Home CCNP lab
Hi, I do not think that you need to setup a LAB to pass the CCNP. But if you would like to do it you must have a 55xx, 36xx, 7xx, 25xx and maybe a 4xxx Regards - Original Message - From: Michael Ross To: [EMAIL PROTECTED] Sent: Friday, November 24, 2000 1:51 AM Subject: Home CCNP lab G Day I am currently looking at setting up a home lab to self study CCNP. I would be most appreciative if any one would be able to assist me by advising what equipment would be required and avaiable to carry out most of the labs. I am in Australia and am willing to purchase second hand equipment. Hopefully the Aussie dollar will improve for exchange rates. Regards, Michael.
Re: Ethernet Frame (revisited for clarification)
Of course it's correct, but it's not really relevant to the question, which was asking about addressing end-to-end. Presumably Host A and Host B are on LANs, so think the problem the rest of the way through.. Priscilla At 09:47 PM 11/23/00, John Green wrote: this post(s) was posted a couple of days back and just wanted some more list memebers to see if this correct before we take this as gospel truth. --- Neil Desai [EMAIL PROTECTED] wrote: To my knowledge serial links don't have a MAC address. Since most of them are either a point-to-point or point-to-multipoint there are some other type of mappings. If a serial port needs a MAC address it usuall uses one from another interface that has one (i.e. ethernet). Neil ""Martinez, Carlos"" [EMAIL PROTECTED] wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... hello all, I had somebody ask me what the source mac address would be on a frame sent across a serial link connected by to two routers, for example: Host A sends a packet to Host B, which is on the other side of the wan link. what would Host B see and what where would he send his reply to.(the local router or Host A or what) thanks in advance _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] __ Do You Yahoo!? Yahoo! Shopping - Thousands of Stores. Millions of Products. http://shopping.yahoo.com/ _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Priscilla Oppenheimer http://www.priscilla.com _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: FDDI address field size ?
The FDDI Frame Control byte has a bit that says whether the FDDI frame uses 16-bit MAC addresses (bit is 0) or 48-bit MAC addresses (bit is 1). The IEEE 802 committee used to allow 16-bit instead of 48-bit addresses. When ANSI developed FDDI they were just following the 802 committee. Theoretically 802.3 and 802.5 could use 16-bit addresses too, but, as you probably know, 16-bit addresses didn't catch on. MAC addresses are 48 bits. Priscilla At 05:07 PM 11/23/00, Phil Barker wrote: Greetings, Reading through CIT course notes Appendix A. It states that the Frame Control field indicates the size of the address fields i.e variable, this is followed by the size of the address fields is 6 bytes. Does anyone know the history behind this ? I´m guessing that it was being positioned to accomodate variable and differing other LAN technologies address sizes, such that it could be used as a versatile backbone !!! Any comments ? Regards, Phil. Do You Yahoo!? Get your free @yahoo.co.uk address at http://mail.yahoo.co.uk or your free @yahoo.ie address at http://mail.yahoo.ie _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Priscilla Oppenheimer http://www.priscilla.com _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Router with Web Cache Engine
FYI : WCCP is working with GRE ! DO NOT FORGET THAT . ADDED to that in some versions (12.0.X) if you have enabled the CEF THE ROUTER IS NOT Forwarding any packets to the WEB CACHE ENGINE ! Regards - Original Message - From: "Kirk Bollinger" [EMAIL PROTECTED] To: "Jon Tucker" [EMAIL PROTECTED] Cc: "'Lowell Sharrah'" [EMAIL PROTECTED]; [EMAIL PROTECTED] Sent: Wednesday, November 22, 2000 4:12 AM Subject: RE: Router with Web Cache Engine FYI: WCCP ver 2 supports TCP and UDP not just http -kirk On Tue, 21 Nov 2000, Jon Tucker wrote: The router does not cache the web pages, the cache engine caches the web pages. The router is told to redirect all outbound HTTP packets to the cache server. Then the cache engine takes over. Either returning a previously cached copy of the requested page or fetching the page and storing it for future requests. Minh, the command to start the wccp process is: "ip wccp enable". I run it on a 3640 router with IP Enterprise 11.2 code. I'm not certain if wccp is available on those lower end systems. I tried a quick search through my cache engine manual, but found no reference to minimum router config. - Jon -Original Message- From: Lowell Sharrah [mailto:[EMAIL PROTECTED]] Sent: Tuesday, November 21, 2000 2:32 PM To: [EMAIL PROTECTED]; [EMAIL PROTECTED] Cc: [EMAIL PROTECTED]; [EMAIL PROTECTED] Subject: Re: Router with Web Cache Engine why would you want a router to cache web pages/addresses? a router is made to route packets. "Minh Vu" [EMAIL PROTECTED] 11/21/00 12:24PM I tried on 2501 vesion 12.1 Enterprise and 1005 version 11.3aT1 Enterprise, they both still don't have that command. (ip wccp) I also do "sh ip wccp" or "sh ip wccp web-caches" and got reply with invalid input: HST2501#sh ip wccp ^ % Invalid input detected at '^' marker. HST2501# Any ??? - Original Message - From: "Steve Smith" [EMAIL PROTECTED] To: "Minh Vu" [EMAIL PROTECTED] Sent: Tuesday, November 21, 2000 9:04 AM Subject: RE: Router with Web Cache Engine * Cisco IOS Release 11.1(14)CA, and the 7500 and 7200 series routers * Cisco IOS Release 11.2 (10)P, and the 2500, 36xx, 4x00, RSP7000, 7200, and 7500 series routers, and the router blade for the Catalyst 5000 Usually Enterprise. I run Enterprise and I have the ability. * -Original Message- From: Minh Vu [mailto:[EMAIL PROTECTED]] Sent: Tuesday, November 21, 2000 10:09 AM To: [EMAIL PROTECTED] Subject: Router with Web Cache Engine Hi, Anyone know which IOS (ie: IP, Enterprise, FW, etc...) support the Web Cache Engine ? I tried to find the command on my router but I couldn't find it on Cisco 1005 and 2501 with Enterprise feature set. I did went thru cisco document site. http://www.cisco.com/univercd/cc/td/doc/product/iaabu/webcache/ce15/ver1 5/wc1pre.htm http://www.cisco.com/univercd/cc/td/doc/product/iaabu/webcache/ce15/ver 15/wc1pre.htm and here http://www.cisco.com/univercd/cc/td/doc/product/iaabu/webcache/ce15/ver1 5/wc1inst.htm#16914 http://www.cisco.com/univercd/cc/td/doc/product/iaabu/webcache/ce15/ver 15/wc1inst.htm#16914 they said type in command in global configuration mode: ip wccp but when I tried on those two routers it was unknown command. Anyone have any hint? Thanks _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Need help with converting IP address to MAC address
Cisco press book (BCMSN) does not really explain well the concept. I was wondering if someone can help me break the barrier. Example in the book: 224.163.163.45 = 01-00-5E-23-A3-2D I thought 163=A3, why is the 2nd octet converted to 23? Any help this would be appreciated. Thanks _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Testing site closed
Anyone testing at Vaser in Foster City, CA, should call Prometric and reschedule. I found out when I went to reschedule my exam. I guess no one was going to tell me. :( _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
setting username and passwords for router logon in http
How do we set the password for a router while logging through http? regards From: "Laurel Redd" [EMAIL PROTECTED] Reply-To: "Laurel Redd" [EMAIL PROTECTED] To: [EMAIL PROTECTED] Subject: Fw: setting username and passwords for router logon in telnet Date: Fri, 24 Nov 2000 11:05:44 -0700 router#(config)line vty 0 4 router#(config)Login(I would use this command here as well) router#(config-line)password (password) router#(config-line)cntl z - Original Message - From: "Tony van Ree" [EMAIL PROTECTED] To: "suaveguru" [EMAIL PROTECTED]; "William Gragido" [EMAIL PROTECTED]; "Chris A" [EMAIL PROTECTED]; [EMAIL PROTECTED] Sent: Thursday, November 23, 2000 8:21 PM Subject: Re: setting username and passwords for router logon in telnet Try this assumes you already have an enable passowrd set. router#(config)line vty 0 4 router#(config-line)password (password) router#(config-line)cntl z and set the enable password router#(config)enable password (password) All this stuff is available on the Cisco CD and or config manuals. Teunis Hobart, Tasmania Australia. On Thursday, November 23, 2000 at 06:46:39 PM, suaveguru wrote: hi anyone knows what's the command to set username and password for router logon for telnet suave guru __ Do You Yahoo!? Yahoo! Shopping - Thousands of Stores. Millions of Products. http://shopping.yahoo.com/ _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] -- www.tasmail.com _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ Get more from the Web. FREE MSN Explorer download : http://explorer.msn.com _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Free Book
Follow this link to order a free copy of "Technology of Edge Aggregation. Or call, 1.800.778.3632 ext. 3966 http://www.cisco.com/go/c10k/dm Cheers, Charles _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Need help with converting IP address to MAC address
IIRC, when doing this conversion, only the first 7 bits in that octet count; the 8th bit is set to zero. Cisco press book (BCMSN) does not really explain well the concept. I was wondering if someone can help me break the barrier. Example in the book: 224.163.163.45 = 01-00-5E-23-A3-2D I thought 163=A3, why is the 2nd octet converted to 23? Any help this would be appreciated. Thanks _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ___ Tired of slow Internet? Get @Home Broadband Internet http://www.home.com/xinbox/signup.html _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Need help with converting IP address to MAC address
Sisqo wrote: Cisco press book (BCMSN) does not really explain well the concept. I was wondering if someone can help me break the barrier. Example in the book: 224.163.163.45 = 01-00-5E-23-A3-2D I thought 163=A3, why is the 2nd octet converted to 23? There is no corelation between MAC address and IP address, save for the association you make when you assign an IP to an interface. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Ethernet Frame (revisited for clarification)
THe LAN data link protocols have source and destination addresses. WAN protocols usually have a destination address field only (see below). If you look at the frame format for any LAN protocol you will see where the Destination and Source MAC address are. If you look at http://www.cisco.com/univercd/cc/td/doc/cisintwk/ito_doc/introwan.htm you will see that where the WAN technologies lay in the OSI model and hopefully this will also explain why serial lines don't have MAC addresses. The reason that LAN protocols have a MAC address and WAN's don't is because LAN's are contention based where WAN's are always full-duplex. Even though layer 2 switching has been around for LAN's for a few years now the protocols have stayed the same for backwards compatibility. Neil I'd disagree that WAN technologies are necessarily full-duplex. Polled, half-duplex operation was extremely common in SNA, as a means of sharing expensive dedicated lines (before frame relay and the like). Both SDLC (and its predecessors such as BSC) and LLC2 are deterministic/token-based rather than collision/contention protocols. The key difference between polled SNA and token ring, however, is control of the token. In SDLC, the token is centrally controlled (by the PU4 or PU5). In TR, control of the token is distributed. When control is centralized, and all traffic flows through the hub/mainframe, there's no need for a source address. The source address is always clear from context. There is a need for a destination address so a destination can know a poll is intended for it. So there is a need for destination addresses in WAN protocols intended for use in a point-to-multipoint environment. PPP, operating in point-to-point mode, never really needed any address field, but was designed with one because not to have one would have been incompatible with commercial data link chips of the time. Indeed, protocols such as SRP are being proposed for efficient POS applications, and these protocols have no address field because they don't need one. PS -- one thing that might be confusing about router serial lines having MAC addresses is that IPX and XNS will "borrow" a MAC address from a LAN interface in order to create the host part of a layer 3 address. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
IPX SAP access-list
What is this IPX SAP access-list mean ? access-list 1001 deny 640 access-list 1001 permit I fund this in a book and I could not find the service type 640. Thanks _ Get more from the Web. FREE MSN Explorer download : http://explorer.msn.com _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: re:cciebootcamp
Mr. Dosch- I've dealt with Kevin Wigle in the past and I can honestly say he is the biggest jackass I've ever had a conversation with. He will never admit that he was ever wrong in any way. It is best to end this, because jerk offs like him waste time of people that logical thinking patterns. BTW EVERYONE has copied something illegally, who hasn't dubbed a tape or recorded something on TV? ""Kevin Wigle"" [EMAIL PROTECTED] wrote in message 007b01c05577$290904e0$[EMAIL PROTECTED]">news:007b01c05577$290904e0$[EMAIL PROTECTED]... I read it very carefully which is why I replied. And it's always easy to say let's stop this thread here when another reply doesn't suit you. You quoted my "break the law" comment as if it was wrong to do so and all I have said is that normal people in this day and age know that such activity is illegal - not just with programs/CDs but most other things you actually pay for. Your general comments about how you have done it and probably how we all have done it supports my comment on "Everybody does it so it's ok". If you have done it how can you say you're opposed to it? (at least publicly), in a debate/discussion you can't have it both ways. If your comments were aimed at the "looser" poster it would have been nice if you attached your reply to that post or at least qualified your remarks. I am very opposed to the "benefit of the doubt" idea (not your comment) as that says to me that the general techie population isn't very aware of the very basic protections afforded original work. I don't believe that is the case. Especially in this forum where just about everyone knows what products are out there and who they benefit and especially who created them. Although this is a large list, the technology we represent is a specialized niche and we all know each other (almost). Finally, if you can't stand the fire - don't jump in. Kevin Wigle - Original Message - From: "Christopher J. Dosch" [EMAIL PROTECTED] To: "Kevin Wigle" [EMAIL PROTECTED]; [EMAIL PROTECTED] Sent: Thursday, November 23, 2000 8:30 AM Subject: RE: re:cciebootcamp I guess you didn't read my e-mail very carefully, I said "I DON'T agree with the illegal pirating of software or other material." I too have invested thousands of dollars in my training and certifications. Where did you see "Everybody does it so it's ok" I don't see that anywhere. Further more the personal attack statement was directed to the quote "Looser" that was from someone else! Sorry for the misunderstanding. I just think we shouldn't be so quick to lash out at people, what would have been wrong with a simple explanation of the license agreement and a "this could get you into trouble" statement. Anyway enough of this thread, lets move on to the real reason were here, helping one another get through the lab and everyday troubleshooting. Chris -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Kevin Wigle Sent: Wednesday, November 22, 2000 10:23 PM To: Christopher J. Dosch; [EMAIL PROTECTED] Subject: Re: re:cciebootcamp I was going to pass on this thread but since you insist by quoting me. Try to think a bit further than "everybody does it so its ok". If that was mans credo where would we be now? Why bother having laws at all? Why bother working hard to accomplish something if someone else can just buy it, or trade for it? I suppose you agree with students buying term papers too, or people buying these "university degrees" through the mail, or falsifying your resume. Where does it stop? The cciebootcamp material aside, it is plain for most thinking people that this type of behavior robs the authors of the income they need to continue to provide quality material. In the Cisco community, we need quality material to meet the demands of a difficult curriculum. Cheapening the worth of the materials we need to make that difficult journey only serves to cheapen the certification process. It is one thing to depend on the CCIE lab to keep the pretenders at bay but why should we encourage them along the way? Who wants to wear letters like CCDP/CCNP if they have become worthless? And just what was the personal attack I am being accused of anyway? By merely stating that the activity would be illegal - is a personal attack? My God! quick! empty the jails!! Kevin Wigle - Original Message - From: "Christopher J. Dosch" [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Wednesday, 22 November, 2000 19:45 Subject: RE: re:cciebootcamp I agree with Laurel, personal attacks should be avoided! I DON'T agree with the illegal pirating of software or other material but I will have to admit, I'm guilty in some form or another, whether it be a friend that just gave me a copy of some software, or I burned a CD for a backup copy. I
Re: Home CCNP lab
Actually you could get by just fine with 2 or 3 2500 series and a Cat 1900. The CAT 1900 has basically the same OS as 5000. Make sure the 2500's have a couple serial (use them as a frame relay or X.25switch) and to test ISDN you will need an ISDN interface and ISDN simulator. - Original Message - From: Elias Aggelidis To: Michael Ross ; [EMAIL PROTECTED] Sent: Friday, November 24, 2000 12:44 PM Subject: Re: Home CCNP lab Hi, I do not think that you need to setup a LAB to pass the CCNP. But if you would like to do it you must have a 55xx, 36xx, 7xx, 25xx and maybe a 4xxx Regards - Original Message - From: Michael Ross To: [EMAIL PROTECTED] Sent: Friday, November 24, 2000 1:51 AM Subject: Home CCNP lab G Day I am currently looking at setting up a home lab to self study CCNP. I would be most appreciative if any one would be able to assist me by advising what equipment would be required and avaiable to carry out most of the labs. I am in Australia and am willing to purchase second hand equipment. Hopefully the Aussie dollar will improve for exchange rates. Regards, Michael.
RE: GRE VS. IPSEc
See Below... -Original Message- From: Adam Quiggle [mailto:[EMAIL PROTECTED]] Sent: Friday, November 24, 2000 4:20 PM To: Liwanag, Manolito; [EMAIL PROTECTED] Subject: RE: GRE VS. IPSEc Manolito, At 01:44 PM 11/23/00, you wrote: Thanks for the detailed replied. BTW my first name is Manolito. No big deal. Take a look at my comments below when you have a minute -Original Message- From: Adam Quiggle [mailto:[EMAIL PROTECTED]] Sent: Thursday, November 23, 2000 1:13 PM To: Liwanag, Manolito; 'Cisco Group Study' Subject: Re: GRE VS. IPSEc 1) Are there just two sites that need to be connected together? (i.e. are there plans for a large scale deployment?) Right now yes.. This remote branch that I want to connect to corporate is using ISDN to get to corporate and the Net. Recent expansion have raised the number of ee to 40 and the bandwidth is now super saturated. I was planning on getting an ADSL connection to replace the ISDN. Basically I want that remote branch to access the internet locally - not to go through our PIX at the corporate site - but other network traffic to go through an IPSec tunnel to corporate. What do you mean you have the number of ee to 40? What is ee? Answer : Employees It is easy to encrypt traffic destined for the corporate site and let the other "Internet" traffic go directly to it, not through the corporate site. Just make sure the access list used in your crypto map only identifies traffic to the corporate office as traffic to be encrypted. If you are talking about PC's that need this functionality it is a little bit more difficult. Your VPN client would have to support "split mode". I believe the Cisco 3000 VPN router (formerly Altiga) can support this type of behavior, although I don't have the details as to how it works. 2) Do you need encryption? Yes 3) Do you need authentication? I think yes as well 4) Do you need to protect against a replay attack? Yes 5) Who are you protecting your data from? everyone that is not an employee With regard to protecting your data, will you be transmitting trade secrets? What would be the potential of having someone intercept your messages? Don't use a shotgun to kill a mosquito. How about using IPSEc with GRE in it ? Any suggestions are very helpfull for me as I am new in this field. I have set up an IPsec tunnel to our other PIX in Australia and I figured that I could do the same for a 1605-R router to the corporate PIX. There is nothing wrong with using IPSec to encrypt a GRE tunnel, it is perfectly acceptable. The question is, do you want to spend the time learning IPSec (this is a good thing) or do you just want to get it done? Realize that the skills required to implement CET are not quite 1/2 the skills/knowledge you need to implement IPSec (in your particular instance). Also realize that you can get bogged down in the details once you realize the features that can be deployed with IPSec. AQ p.s. Sorry about the name. I did get it right this time. :-) No worries Mate :D Thank you very much for the feedback. I am using this small project to learn a bit more about IPsec and GRE. ** Adam Quiggle Senior Network Engineer MCI Worldcom/BP Amoco [EMAIL PROTECTED] ** _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Need help with converting IP address to MAC address
Title: RE: Need help with converting IP address to MAC address A MAC address is an address that is burned into an Ethernet NIC by the manufacturer. The first three (it is three, right?) octets identify the manufacturer. This address is completely independent of any network layer address you assign to the interface. That's why you can assign an IP address, a secondary IP address, an IPX address, and an AppleTalk address all to the same interface. It will still have the same MAC. The MAC is used in network segments to identify the next hop a frame must take, whereas a network layer address identifies the starting and ending points only. - Don -Original Message- From: Sisqo [mailto:[EMAIL PROTECTED]] Sent: Friday, November 24, 2000 12:15 PM To: [EMAIL PROTECTED] Subject: Need help with converting IP address to MAC address Cisco press book (BCMSN) does not really explain well the concept. I was wondering if someone can help me break the barrier. Example in the book: 224.163.163.45 = 01-00-5E-23-A3-2D I thought 163=A3, why is the 2nd octet converted to 23? Any help this would be appreciated. Thanks _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: GRE VS. IPSEc
Manolito, At 01:44 PM 11/23/00, you wrote: Thanks for the detailed replied. BTW my first name is Manolito. No big deal. Take a look at my comments below when you have a minute -Original Message- From: Adam Quiggle [mailto:[EMAIL PROTECTED]] Sent: Thursday, November 23, 2000 1:13 PM To: Liwanag, Manolito; 'Cisco Group Study' Subject: Re: GRE VS. IPSEc 1) Are there just two sites that need to be connected together? (i.e. are there plans for a large scale deployment?) Right now yes.. This remote branch that I want to connect to corporate is using ISDN to get to corporate and the Net. Recent expansion have raised the number of ee to 40 and the bandwidth is now super saturated. I was planning on getting an ADSL connection to replace the ISDN. Basically I want that remote branch to access the internet locally - not to go through our PIX at the corporate site - but other network traffic to go through an IPSec tunnel to corporate. What do you mean you have the number of ee to 40? What is ee? It is easy to encrypt traffic destined for the corporate site and let the other "Internet" traffic go directly to it, not through the corporate site. Just make sure the access list used in your crypto map only identifies traffic to the corporate office as traffic to be encrypted. If you are talking about PC's that need this functionality it is a little bit more difficult. Your VPN client would have to support "split mode". I believe the Cisco 3000 VPN router (formerly Altiga) can support this type of behavior, although I don't have the details as to how it works. 2) Do you need encryption? Yes 3) Do you need authentication? I think yes as well 4) Do you need to protect against a replay attack? Yes 5) Who are you protecting your data from? everyone that is not an employee With regard to protecting your data, will you be transmitting trade secrets? What would be the potential of having someone intercept your messages? Don't use a shotgun to kill a mosquito. How about using IPSEc with GRE in it ? Any suggestions are very helpfull for me as I am new in this field. I have set up an IPsec tunnel to our other PIX in Australia and I figured that I could do the same for a 1605-R router to the corporate PIX. There is nothing wrong with using IPSec to encrypt a GRE tunnel, it is perfectly acceptable. The question is, do you want to spend the time learning IPSec (this is a good thing) or do you just want to get it done? Realize that the skills required to implement CET are not quite 1/2 the skills/knowledge you need to implement IPSec (in your particular instance). Also realize that you can get bogged down in the details once you realize the features that can be deployed with IPSec. AQ p.s. Sorry about the name. I did get it right this time. :-) ** Adam Quiggle Senior Network Engineer MCI Worldcom/BP Amoco [EMAIL PROTECTED] ** _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: re:cciebootcamp
Glad I could give you an opportunity to display how much better you hide your personality. Kevin Wigle "NetEng" [EMAIL PROTECTED] wrote in message 8vmhk0$tmp$[EMAIL PROTECTED]">news:8vmhk0$tmp$[EMAIL PROTECTED]... Mr. Dosch- I've dealt with Kevin Wigle in the past and I can honestly say he is the biggest jackass I've ever had a conversation with. He will never admit that he was ever wrong in any way. It is best to end this, because jerk offs like him waste time of people that logical thinking patterns. BTW EVERYONE has copied something illegally, who hasn't dubbed a tape or recorded something on TV? _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Stupid Cat 5xxx question
Shahir, The cable used for any console= rollover cable=pin 1 attached to 8 and if you rolled this cable over again it will become a straight cable. So the used cable is a straigh cable at the end as Elias said. I know you are trying to help, but I think this way you make others get confused. Make it simple by saying a straigh cable is needed. Thanks On Thu, 23 Nov 2000 15:52:25 +0200, Shahir Boshra wrote: well, the cable is the same cisco RJ-45 cable used for any console. it's in fact "inverted" meaning pin1 attaches to pin 8 of the other side and so on. ""Elias Aggelidis"" [EMAIL PROTECTED] wrote in message 024801c05548$665ab200$[EMAIL PROTECTED]">news:024801c05548$665ab200$[EMAIL PROTECTED]... NOPE ! It has an RJ-45 connector which you can use it with both DB25 or DB9 connectors from Cisco and a STRAIT cable NOT ROLLOVER ELIAS - Original Message - From: "Timothy Metz" [EMAIL PROTECTED] Newsgroups: groupstudy.cisco To: [EMAIL PROTECTED] Sent: Thursday, November 23, 2000 12:59 PM Subject: Stupid Cat 5xxx question I've just read (and never noticed on the 5500 we have at work), that the 5xxx series has a RS-232 console connector (I assume this to mean DB9 or DB25) that requires the use of a rollover cable (it did not say null modem), so I guess that means I need two DB25/DB9 to RJ-45 connectors and a rollover between them to log on through the console port. Can someone please confirm. Happy Thanksgiving (to those who observe) Tim _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ___ Tired of slow Internet? Get @Home Broadband Internet http://www.home.com/xinbox/signup.html _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Need help with converting IP address to MAC address
He's talking about multicast IP to multicast MAC translation. Notice the MAC address starting with 01 Patrick Sisqo wrote: Cisco press book (BCMSN) does not really explain well the concept. I was wondering if someone can help me break the barrier. Example in the book: 224.163.163.45 = 01-00-5E-23-A3-2D I thought 163=A3, why is the 2nd octet converted to 23? There is no corelation between MAC address and IP address, save for the association you make when you assign an IP to an interface. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: VPN in CCIE LAB?
Rol, Check out the following link. It is an interview with Jeff Buddemeier, Cisco's CCIE Program Manager, on December 8, 1999, right from the horses mouth, so to speak. http://www.tcpmag.com/chat/cisco120899.doc A few excerpts from the conversation Eddie says: Jeff how much of the lab involves security issues and VPN's Host Jeff_B says: Eddie: We have one lab with VPN's that has about 8 points on it. HTH, AQ At 04:02 AM 11/24/00, Rol wrote: Somebody told me that VPN appeared on LAB. Is that true? _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ** Adam Quiggle Senior Network Engineer MCI Worldcom/BP Amoco [EMAIL PROTECTED] ** _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
No Subject
Does anyone know the full extent of the software included on the cd. Is it just the test engine? Thanx Dyland Desmarais Tier 2 Support Representative Shaw High Speed Internet Services Shaw Cablesystems G.P. Suite 1100, 630 - 3 Avenue S.W. Calgary, Alberta T2P 4L4 Telephone: (403) 750-6990 http://support.shaw.home.com mailto:[EMAIL PROTECTED] Do you know your local phone number for technical support? If not, please visit http://support.shaw.home.com/contact/phones.htm If you look on www.barnesandnobel.com http://www.barnesandnobel.com they have the pack for the 2.0v but you have to wait 1-2 weeks for delivery. but it you are able to spend the extra $ I would suggest you get the individual books mainly cause they come with test engines that will help in your studies and the library does not come with CDs hope this helps -Original Message- From: Andy Kirkby [mailto:[EMAIL PROTECTED]] Sent: Thursday, November 23, 2000 9:22 AM To: '[EMAIL PROTECTED]' mailto:'[EMAIL PROTECTED]' Subject: CCNP Study Guides Hello all, I know there is a Cisco Press study pack available for CCNP V1.0, I have been looking on Amazon for the new study pack but the info they provide is a bit vague. Can anybody comment on whether the CCNP Study pack has been updated for CCNP V2.0? Any other comments regarding this area would be appreciated. Andy Kirkby _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Need book recomendation please...
Networking Essentials for Dummies was the first networking book I read and it helped out quite a bit. That might be a good place to start. After that, if she's interested in all-things-Cisco, perhaps get her to read a CCNA study guide of some sort. Sybex has a very good one. A friend of mine wants to get into the IT industry but doesn't know much... I was thinking of having her read something that covers the basics of networking, like the Network+ Exam Prep or something similiar. Just curious if anyone thinks there's something better out there that's an easy read? Cheers in advance, Jeff _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ___ Tired of slow Internet? Get @Home Broadband Internet http://www.home.com/xinbox/signup.html _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Need book recomendation please...
A friend of mine wants to get into the IT industry but doesn't know much... I was thinking of having her read something that covers the basics of networking, like the Network+ Exam Prep or something similiar. Just curious if anyone thinks there's something better out there that's an easy read? Cheers in advance, Jeff _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Need help with converting IP address to MAC address
I think the correct mapping should be: 224.163.163.45 = 01-00-5E-A3-A3-2D Here is a great URL at 3com by Chuck Semeria and Tom Maufer http://www.3com.com/nsc/501303.html I think this will give you a good idea of how to map (not convert) a 32 bit class D multicast address to a 48 bit ethernet address. Hope this helps..dj ""Patrick A. Morin"" [EMAIL PROTECTED] wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... He's talking about multicast IP to multicast MAC translation. Notice the MAC address starting with 01 Patrick Sisqo wrote: Cisco press book (BCMSN) does not really explain well the concept. I was wondering if someone can help me break the barrier. Example in the book: 224.163.163.45 = 01-00-5E-23-A3-2D I thought 163=A3, why is the 2nd octet converted to 23? There is no corelation between MAC address and IP address, save for the association you make when you assign an IP to an interface. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Need help with converting IP address to MAC address
I stand corrected. You have to use the rightmost 23 bits not all 24. See ElephantChild's response.. ""D. J. Jones"" [EMAIL PROTECTED] wrote in message 8vn06a$lms$[EMAIL PROTECTED]">news:8vn06a$lms$[EMAIL PROTECTED]... I think the correct mapping should be: 224.163.163.45 = 01-00-5E-A3-A3-2D Here is a great URL at 3com by Chuck Semeria and Tom Maufer http://www.3com.com/nsc/501303.html I think this will give you a good idea of how to map (not convert) a 32 bit class D multicast address to a 48 bit ethernet address. Hope this helps..dj ""Patrick A. Morin"" [EMAIL PROTECTED] wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... He's talking about multicast IP to multicast MAC translation. Notice the MAC address starting with 01 Patrick Sisqo wrote: Cisco press book (BCMSN) does not really explain well the concept. I was wondering if someone can help me break the barrier. Example in the book: 224.163.163.45 = 01-00-5E-23-A3-2D I thought 163=A3, why is the 2nd octet converted to 23? There is no corelation between MAC address and IP address, save for the association you make when you assign an IP to an interface. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Need help with converting IP address to MAC address
Let me clean up any confusion I may have created. First of all, the low-order 23 bits of the ip multicast group id is placed into the low order 23 bits of the ethernet address. Taking the last 3 octets of the 224.163.163.45 address will leave you 163.163.45. In most cases 163 does convert to A3, however the second octet of the 224.163.163.45 address only has 7 useable bits (when dealing with multicast only). so translating to binary normally you would have: 10100011.10100011.00101101=163.163.45 8 bits8 bits8 bits or A3-A3-2D using 24 bits of address space. translating for multicast purposes would drop the first bit of the second octet and give you the following: 0100011.10100011.00101101=35.163.45 7 bits 8 bits8 bits or 23-A3-2d using 23 bits of address space. (note that 35 translates to 23 hex) so, the complete mac address will be 01-00-5E-23-A3-2D Hopefully this makes a little more sense..dj ""D. J. Jones"" [EMAIL PROTECTED] wrote in message 8vn10r$m8h$[EMAIL PROTECTED]">news:8vn10r$m8h$[EMAIL PROTECTED]... I stand corrected. You have to use the rightmost 23 bits not all 24. See ElephantChild's response.. ""D. J. Jones"" [EMAIL PROTECTED] wrote in message 8vn06a$lms$[EMAIL PROTECTED]">news:8vn06a$lms$[EMAIL PROTECTED]... I think the correct mapping should be: 224.163.163.45 = 01-00-5E-A3-A3-2D Here is a great URL at 3com by Chuck Semeria and Tom Maufer http://www.3com.com/nsc/501303.html I think this will give you a good idea of how to map (not convert) a 32 bit class D multicast address to a 48 bit ethernet address. Hope this helps..dj ""Patrick A. Morin"" [EMAIL PROTECTED] wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... He's talking about multicast IP to multicast MAC translation. Notice the MAC address starting with 01 Patrick Sisqo wrote: Cisco press book (BCMSN) does not really explain well the concept. I was wondering if someone can help me break the barrier. Example in the book: 224.163.163.45 = 01-00-5E-23-A3-2D I thought 163=A3, why is the 2nd octet converted to 23? There is no corelation between MAC address and IP address, save for the association you make when you assign an IP to an interface. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
OT: NP-4B and NP-8B
Hi All Sorry to add to the OT flow... I have looked at about 50 pages on CCO looking to find out if the NP-4B or NP-8B has a U or S/T interface. Does anyone know? TIA -- John Hardman CCNP MCSE+I _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Passed CCDA
Hi there, Passed CCDA on 11/21 with a 844. Exam was very taxing. I was stressed out when I came out of the exam room. The exam will test your mental strength more than you technical knowledge. I had 4 case studies and 50 % straight forward questions. I probably passed because of those straight questions. I read just the Sybex study guide, which was good in my opinion. Focus is what you need to get through this exam. On to CID now to complete the CCDP. Welcome your input on CID preparation and study materials. Good Luck! Cheers, Sundar Palaniappan CCNP, MCSE _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: CCIE TroubleShooting Part
Actually there was an Interview with the head of the CCIE Program online at one of the prep sites and he stated that you can expect one of two things: 1) Your existing Network has errors introduced into it. 2) A New broken Network has been downloaded onto you network So both are possible, remember this portion of the test is for your ability to logically troubleshoot pregressively and document your findings. BTW none of this is against the NDA as I have said it because it's all available from Cisco Releases or the CCIE Program info itself Darren James Wilson wrote: Depends on your paper, and thats going a little beyond the NDA. At 11:45 PM 23/11/2000 -0800, ShahzaD Ali wrote: Hi there, Is it true you need to troubleshoot entirely a new scnerio when you are trouble shooting in day 2? AnyOne knows about this? Regards, SchahzaD _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
what's the mean of lo0,qfe0 and hme0?
thanx _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: what's the mean of lo0,qfe0 and hme0?
It looks like interfaces on a sun box. qfe0 is port 0 on a quad fast ethernet card. Clayton Price ""cslx"" [EMAIL PROTECTED] wrote in message 8vn6rj$tp1$[EMAIL PROTECTED]">news:8vn6rj$tp1$[EMAIL PROTECTED]... thanx _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Need help with converting IP address to MAC address
Yes, this makes a lot of sense now...thanks for your feedback. ""D. J. Jones"" [EMAIL PROTECTED] wrote in message 8vn2vm$p9f$[EMAIL PROTECTED]">news:8vn2vm$p9f$[EMAIL PROTECTED]... Let me clean up any confusion I may have created. First of all, the low-order 23 bits of the ip multicast group id is placed into the low order 23 bits of the ethernet address. Taking the last 3 octets of the 224.163.163.45 address will leave you 163.163.45. In most cases 163 does convert to A3, however the second octet of the 224.163.163.45 address only has 7 useable bits (when dealing with multicast only). so translating to binary normally you would have: 10100011.10100011.00101101=163.163.45 8 bits8 bits8 bits or A3-A3-2D using 24 bits of address space. translating for multicast purposes would drop the first bit of the second octet and give you the following: 0100011.10100011.00101101=35.163.45 7 bits 8 bits8 bits or 23-A3-2d using 23 bits of address space. (note that 35 translates to 23 hex) so, the complete mac address will be 01-00-5E-23-A3-2D Hopefully this makes a little more sense..dj ""D. J. Jones"" [EMAIL PROTECTED] wrote in message 8vn10r$m8h$[EMAIL PROTECTED]">news:8vn10r$m8h$[EMAIL PROTECTED]... I stand corrected. You have to use the rightmost 23 bits not all 24. See ElephantChild's response.. ""D. J. Jones"" [EMAIL PROTECTED] wrote in message 8vn06a$lms$[EMAIL PROTECTED]">news:8vn06a$lms$[EMAIL PROTECTED]... I think the correct mapping should be: 224.163.163.45 = 01-00-5E-A3-A3-2D Here is a great URL at 3com by Chuck Semeria and Tom Maufer http://www.3com.com/nsc/501303.html I think this will give you a good idea of how to map (not convert) a 32 bit class D multicast address to a 48 bit ethernet address. Hope this helps..dj ""Patrick A. Morin"" [EMAIL PROTECTED] wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... He's talking about multicast IP to multicast MAC translation. Notice the MAC address starting with 01 Patrick Sisqo wrote: Cisco press book (BCMSN) does not really explain well the concept. I was wondering if someone can help me break the barrier. Example in the book: 224.163.163.45 = 01-00-5E-23-A3-2D I thought 163=A3, why is the 2nd octet converted to 23? There is no corelation between MAC address and IP address, save for the association you make when you assign an IP to an interface. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: CCIE TroubleShooting Part
I think this is the interview Darren was talking about. http://www.tcpmag.com/chat/cisco120899.doc Funny, just posted this link in a different thread earlier today. :-) AQ At 07:48 PM 11/24/00, Darren Ward wrote: Actually there was an Interview with the head of the CCIE Program online at one of the prep sites and he stated that you can expect one of two things: 1) Your existing Network has errors introduced into it. 2) A New broken Network has been downloaded onto you network So both are possible, remember this portion of the test is for your ability to logically troubleshoot pregressively and document your findings. BTW none of this is against the NDA as I have said it because it's all available from Cisco Releases or the CCIE Program info itself Darren James Wilson wrote: Depends on your paper, and thats going a little beyond the NDA. At 11:45 PM 23/11/2000 -0800, ShahzaD Ali wrote: Hi there, Is it true you need to troubleshoot entirely a new scnerio when you are trouble shooting in day 2? AnyOne knows about this? Regards, SchahzaD _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ** Adam Quiggle Senior Network Engineer MCI Worldcom/BP Amoco [EMAIL PROTECTED] ** _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
CAR Implementation
any body can help me ? I have implemented CAR at Cisco 7500 with IOS 12 , but i confuse about how to count normal burst, extended burst and the fuctions both of them. Thank's Rudhy CCNA _ Get more from the Web. FREE MSN Explorer download : http://explorer.msn.com _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: AppleTalk on 640-025?
It's listed on the objectives: http://www.cisco.com/warp/public/10/wwtraining/certprog/testing/pdf/cid.pdf No doubt you'll only get 1-2 questions on it at the most. Let me know how things go regarding this. I take my CID in a few weeks. -- Jason Roysdon, CCNA, MCSE, CNA, Network+, A+ List email: [EMAIL PROTECTED] Homepage: http://jason.artoo.net/ Cisco resources: http://r2cisco.artoo.net/ ""Craig E. Smith"" [EMAIL PROTECTED] wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Is there any AppleTalk on the 640-025? _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Aeronet Comparisons
Win98SE driver installs much more cleanly for the Aeronet than the 3Com stuff. I was evaluating both for a bit and was constantly having problems with the 3Com side. Both worked fine in Windows 2000 Pro. Both Access Points (APs) work great, and work fine with either card. I think the Cisco interface is a bit more friendly than the 3Com. Also, it supports 100mbit to the network, vs. the 3Com was only 10mbit. The cards are of course 11mbit, but you can't possibly get that if the network connection is only 10mbit. I don't know how much overhead the wireless protocol has, but it seems to fly with either card/AP(of course, I only tested with my sole laptop). I'm thinking about buying a Linksys AP to have at home when I have to give the Cisco AP back. Only $252 at buy.com, compared to Cisco's $700+ cost (I know, I lose encryption, but this is at my house and I could care less, plus I use SSH for everything except generic web access anyway). -- Jason Roysdon, CCNA, MCSE, CNA, Network+, A+ List email: [EMAIL PROTECTED] Homepage: http://jason.artoo.net/ Cisco resources: http://r2cisco.artoo.net/ "Charles Nunie" [EMAIL PROTECTED] wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Hello Everyone, We are gearing up to launch the Aeronet in our local market. Can anyone tell em how well the Aeronet compare with other Wireless LAN equipment on the market. Dzilo Get free email and a permanent address at http://www.netaddress.com/?N=1 _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Cisco Netacademy ?
No offense, but I bet noone sends that to you. If you are supposed to have access, contact Cisco and they will be glad to offer help. They did when I had a problem. They are tight about hackers gaining access however, but thanx. Jennifer Cribbs [EMAIL PROTECTED] = Original Message From "Hans Schimek" [EMAIL PROTECTED] = i am a regular user of the cisco netacad program - i am allowed to enter the CCNA program but for now i am not allowed to enter the CCNP program anymore - the regional academy where i am studying does not have the CCNP license so far. i am nearly finished with the CCNP program . until yesterday i used this netacad-curriculum - but today i am not allowed anymore. does anyone have a password and username for that site. just to complete my ccnp certification thanx in advance hans _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: re:cciebootcamp
WILL YOU KNOCK OFF THE POTSHOTS AND QUIT IT. THIS IS GETTING RIDICULOUS. ARE WE ALL CHILDREN THAT FEEL WE MUST BE RIGHT AND LASH OUT AT EVERYONE ELSE? - Original Message - From: "Kevin Wigle" [EMAIL PROTECTED] To: "cisco" [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Sent: Friday, November 24, 2000 2:43 PM Subject: Re: re:cciebootcamp Glad I could give you an opportunity to display how much better you hide your personality. Kevin Wigle "NetEng" [EMAIL PROTECTED] wrote in message 8vmhk0$tmp$[EMAIL PROTECTED]">news:8vmhk0$tmp$[EMAIL PROTECTED]... Mr. Dosch- I've dealt with Kevin Wigle in the past and I can honestly say he is the biggest jackass I've ever had a conversation with. He will never admit that he was ever wrong in any way. It is best to end this, because jerk offs like him waste time of people that logical thinking patterns. BTW EVERYONE has copied something illegally, who hasn't dubbed a tape or recorded something on TV? _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
CCIE
Hey Group, Does anybody have any good links where I could get some articles or files that can explain what the CCIE certification is really all about, and how much work and dedication is involved in achieving this goal? I'm one test away from my CCNP and would like to start preparing my wife as to what it will take to get the "golden router". She really doesn't understand what it is I do at work, so I was looking for some articles that could explain to her what is REALLY involved with this cert. I'm hoping this will ease the tension a little when I have my nose stuck in a book late at night and weekends, for months on end. Thx all, Kevin Keay (MCP, CNA, N+, CCNA, CCDA ) Network WAN Specialist _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
CCSI
Sorry for being out of topic. Does anyone know how do one proceed in getting the Cisco Certified Systems Instructor (CCSI) certification. I have tried to look on the CCO but could not locate any specific information regarding this. Thanks in advance Abdul Kadir _ Get more from the Web. FREE MSN Explorer download : http://explorer.msn.com _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: BGP and RPSL for Dummies
You only need to tell them your ip blocks (and even when those change, it doesn't really matter). When you register to get your ASN, you'll specify the coordinator on the form. Routes are advertised by you and/or your ISPs. Biggest thing is the ~$400 registeration fee for the ASN. -- Jason Roysdon, CCNA, MCSE, CNA, Network+, A+ List email: [EMAIL PROTECTED] Homepage: http://jason.artoo.net/ Cisco resources: http://r2cisco.artoo.net/ "John Neiberger" [EMAIL PROTECTED] wrote in message 17476811.975083277954.JavaMail.imail@tiptoe">news:17476811.975083277954.JavaMail.imail@tiptoe... We are quickly moving to multi-homing with two separate providers using BGP. One of the providers requires us to register our AS info with a routing registry and I've chosen ARIN's registry for this. My problem is that even after reading everything I can find about RPSL, I'm still a tad confused about which objects I need to register. We are going to be using the address space assigned by one of the providers. Because of that, it appears to me that we only need to register three objects: maintainer, AS, and route. Is that the case? I see no need for any others, but I'm very new to this. Do any of you have experience with this? Is there an RPSL for Newbies out there? I've read the RFCs and they are very helpful, but I'm still unsure of myself here. TIA, John ___ Tired of slow Internet? Get @Home Broadband Internet http://www.home.com/xinbox/signup.html _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
FW: CCNP Study Guides
Well this is interesting the Cisco Trade books all are coming with cds but the routing boot is not out yet from Cisco Trade isbn#1587200015 due January 2001 the book someone was talking about earlier what published by Macmillan Technical Publishing and it did do not come with a cd. So to answer your question, NO this book with this isbn#1578702283 does not come with a cd but if you get the Cisco Trade books not the Macmillan Technical Publishing they all are coming with CDs. I have put all the isbn #'s here for you to reference and until Cisco gets their Cisco Press web site back up i am unable to find the Cisco Trade for the Support exam but i find it odd that Macmillan Technical Publishing puts out a cd for the Support exam and not one for the routing exam go figure Switching:158727 Routing:1587200015 Remote:1587200031 Support:0735709955 (this is not Cisco Trade this is Macmillan Technical Publishing that comes with a cd) check this site out there is three pages of books. http://shop.barnesandnoble.com/booksearch/results.asp?userid=1NM0G4OVOEmscs sid=V1G0DPM4PHEQ9GFMSRPSW1BEQQ07EG83WRD=ccnpOPR=ASRT=SSAT=1 -Original Message- From: Dyland Desmarais [mailto:[EMAIL PROTECTED]] Sent: Friday, November 24, 2000 7:48 PM To: 'Faxon, James' Subject: RE: I just want to make sure we're talking about the same book here. I was asking about the Building Scalable Cisco Networks published by CiscoPress ISBN:1578702283 Can I assume from your response it does come with a CD and the cd contains the stuff you mentioned below? Thanx -Original Message- From: Faxon, James [mailto:[EMAIL PROTECTED]] Sent: Friday, November 24, 2000 7:43 PM To: Dyland Desmarais Subject: RE: No there is alot more a virtual book some Boson utilities and even flash cards at least on the cd i got. -Original Message- From: Dyland Desmarais [mailto:[EMAIL PROTECTED]] Sent: Friday, November 24, 2000 3:59 PM To: '[EMAIL PROTECTED]' Subject: Does anyone know the full extent of the software included on the cd. Is it just the test engine? Thanx Dyland Desmarais Tier 2 Support Representative Shaw High Speed Internet Services Shaw Cablesystems G.P. Suite 1100, 630 - 3 Avenue S.W. Calgary, Alberta T2P 4L4 Telephone: (403) 750-6990 http://support.shaw.home.com mailto:[EMAIL PROTECTED] Do you know your local phone number for technical support? If not, please visit http://support.shaw.home.com/contact/phones.htm If you look on www.barnesandnobel.com http://www.barnesandnobel.com they have the pack for the 2.0v but you have to wait 1-2 weeks for delivery. but it you are able to spend the extra $ I would suggest you get the individual books mainly cause they come with test engines that will help in your studies and the library does not come with CDs hope this helps -Original Message- From: Andy Kirkby [mailto:[EMAIL PROTECTED]] Sent: Thursday, November 23, 2000 9:22 AM To: '[EMAIL PROTECTED]' mailto:'[EMAIL PROTECTED]' Subject: CCNP Study Guides Hello all, I know there is a Cisco Press study pack available for CCNP V1.0, I have been looking on Amazon for the new study pack but the info they provide is a bit vague. Can anybody comment on whether the CCNP Study pack has been updated for CCNP V2.0? Any other comments regarding this area would be appreciated. Andy Kirkby _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: BSCN/Routing 2.0 Test Question
BSCN/Routing 2.0 Test QuestionI've only been doing the pure networking side (not desktop or servers these days, just pure routers and firewalls) for the last year. I'd say I've seen at least 3 sites that had problems due to subnetting misconfigurations (or would have, if I hadn't spotted it). One such problem was with PacBell and a block of IPs that went 2 above the actual subnet range. It happens, but if you don't know it you'll never spot it unless you're constantly plugging it into your subnet calculator. In the PacBell case, I spotted it right away as a /27 only gives you 30 usable addresses, and they listed 32 (and no, not just the network - broadcast range, but the first usable host to that last usable host, plus 2). -- Jason Roysdon, CCNA, MCSE, CNA, Network+, A+ List email: [EMAIL PROTECTED] Homepage: http://jason.artoo.net/ Cisco resources: http://r2cisco.artoo.net/ ""Pickett, Mike"" [EMAIL PROTECTED] wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... I'm not trying to start a fight or anything, but i laugh everytime i hear someone say you will live by subnetting, in 5 years its never been an issue, see ya -Original Message- From: Fernandez, Raul Sent: Wednesday, November 22, 2000 2:10 PM To: Pickett, Mike; Jim Erickson; [EMAIL PROTECTED] Subject: Re: BSCN/Routing 2.0 Test Question Well, I believe you dont use subnetting enough then if you think a calculator is needed. Once in the industry you will live by it and you should be able to do it in your head for the most part. Even VLSM which is just the subnetting of subnets. Forget calcs its not that difficult. Sincerely, Raul -Original Message- From: Pickett, Mike [EMAIL PROTECTED] To: Jim Erickson [EMAIL PROTECTED]; [EMAIL PROTECTED] [EMAIL PROTECTED] Date: Wednesday, November 22, 2000 1:18 PM Subject: RE: BSCN/Routing 2.0 Test Question took it this morning and passed with a 759, not awful for doing it in 10 days. There was one subnetting question about # of host, no big deal, and there was some on vlsm and summarization, but very easy questions on it. now about that bottom line you wrote.i can think of nothing worse than live to subnet, : ), thats what calculators are for -Original Message- From: Jim Erickson [mailto:[EMAIL PROTECTED]] Sent: Wednesday, November 22, 2000 11:01 AM To: [EMAIL PROTECTED] Subject: Re: BSCN/Routing 2.0 Test Question I don't remember much straight-up subnetting, but if you read the exam objectives, this exam does cover VLSM and route summarization. If you have trouble doing 'normal' subnetting, these will kill you. Learn to subnet, live to subnet, love to subnet! ---JRE--- ""Pickett, Mike"" [EMAIL PROTECTED] wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Hey, Just wondering if anyone knows how much subnetting there is on this test, with questions such as determine the # of networks/host/broadcast address of a given ip address thanks! Mike Pickett Enterprise Network Consultant Worldcom 770-284-5844 Pager: 800-724-3624 Pin: 1684328 _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: CBAC - IPSEC tunnel to the PIX
ADSL WIC isn't out yet (was supposed to be in August). Don't hold your breath for it, buy a 1605R and save the 1604 for elsewhere. Regarding your line of thought, yeah, sounds like no problem with Extended ACLs. I'd suggest getting the IP Firewall Plus IPSEC 56 IOS, which will take care of all of it. At a minimum, you need the IPSEC 56 IOS to tunnel to the PIX, which is probably going to make you need more DRAM and Flash. -- Jason Roysdon, CCNA, MCSE, CNA, Network+, A+ List email: [EMAIL PROTECTED] Homepage: http://jason.artoo.net/ Cisco resources: http://r2cisco.artoo.net/ ""Liwanag, Manolito"" [EMAIL PROTECTED] wrote in message A7ED9E5852A7D311839D009027DE284C804EBC@exchtor">news:A7ED9E5852A7D311839D009027DE284C804EBC@exchtor... I have a remote branch that I want to change from a frame connection to Corporate to an ADSL connection. I currently have a 1604 router in that branch. The 1604 has a bri module on it. Is it possible to buy a wic for that router that supports ADSL ? or do I have get a 1700 ? Second question: With an ADSL connection to the internet, I want to create an access list with CBAC to connect the private inside network out to the internet to our PIX at corporate. I will block most traffic coming in from the internet. I will also need to create an IPSEC tunnel to our pix. Can anybody give me some feedback on this line of thinking. I think it will work :D Manolito Liwanag ITT Department DRAKE INTERNATIONAL _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: CCDA after CCNA
First, how well do you know the Cisco products already and how good are you with scenario questions (customer has x users, x sites, x speed requirements; what products to connect?)? If you're like most of us not selling product and doing the design work, you probably hate that sort of stuff. If not, and you know it pretty well, go for it as it's one test and it gets you another cert real fast. However, my logic was this: I suck at the design/Cisco product line (I know some stuff really well, stuff that I work with all the time, 1600s, 2500s, 2600s, 3600s, and some switches, but that's it), so I'm doing my CCNP now (CIT is all I have left). As soon as I get that done, I'll do my CCDA, and then my CID test for my CCDP. That way I get all the design stuff within a short time frame and hopefully it'll stick better and I won't have to relearn stuff so much (I know the CCDA to CID test level is huge, but still, the point is to have a base and add to it, not build base one (engineer) then another (design) and then add back to the other (engineer) and then adding more to the second (design)). Hmm, I rambled a bit much. Really I should be reading my CIT book so I'm ready to take the test the first day I have available next week. Anyone out there ever wish you could take tests after 5pm? Not that I'd really want to, and I know I could book a weekend test if I wanted to travel... oh well. -- Jason Roysdon, CCNA, MCSE, CNA, Network+, A+ List email: [EMAIL PROTECTED] Homepage: http://jason.artoo.net/ Cisco resources: http://r2cisco.artoo.net/ ""Un|tZ"" [EMAIL PROTECTED] wrote in message 009101c0544e$20df9600$0500a8c0@ntlinux">news:009101c0544e$20df9600$0500a8c0@ntlinux... Hi Group, I just passed my CCNA test this week and i was just wondering if i should go and attempt CCDA or go for ACRC ? Do you think attempting CCDA would do me any good as in terms of advancing further at the workplace ? Or ACRC would be a wiser option.? Thanks in advance Dharmesh _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: what's the mean of lo0,qfe0 and hme0?
Lo0 is the local interface (127.0.0.1) and Qfe0-3 are the ports on a quad FE card, Hme0 is the built in or standard Ethernet interface on all Sun Boxes. By the way the previous post is correct that this is on a SUN box. ML "cslx" [EMAIL PROTECTED] wrote in message 8vn6rj$tp1$[EMAIL PROTECTED]">news:8vn6rj$tp1$[EMAIL PROTECTED]... thanx _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Cert Totals
Where are these numbers coming from? I know the CCIE numbers are published, but I've never spotted the Cisco Career cert numbers anywhere on CCO. Is this internal Cisco info? -- Jason Roysdon, CCNA, MCSE, CNA, Network+, A+ List email: [EMAIL PROTECTED] Homepage: http://jason.artoo.net/ Cisco resources: http://r2cisco.artoo.net/ ""John Hardman"" [EMAIL PROTECTED] wrote in message 8sv4be$4ec$[EMAIL PROTECTED]">news:8sv4be$4ec$[EMAIL PROTECTED]... Hi I spotted this on the alt.certification.cisco list this AM and thought I would forward it here since the question has been asked s many times. In a follow up post asking where he got these figures, his reply was from his network academy instructor. "Lou Hamilton" [EMAIL PROTECTED] wrote in message news:4svI5.2116$[EMAIL PROTECTED]... Thought these numbers would be of interest to some people. BREAKDOWN BY THEATRE- Through July 2000 US/CAN EMEA Asia/Pac Americas Japan Total per Cert CCNA 51509 14209 15166 1040 8153 90077 CCNP 4131 1954 1076 95 249 7505 CCDA 7732 3823 1622 408 445 14030 CCDP 1315 786 363 43 97 2604 CCNA-WAN 387 112 50 29 16 594 CCNP-WAN 36 21 8 9 2 76 CCDP-WAN 10 9 2 2 0 23 Total 65120 20914 18287 1626 8962 114,909 Voice 281 137 97 13 30 558 LAN ATM 118 51 70 5 1 245 Security 156 136 41 5 11 349 Total 555 324 208 23 42 1152 -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= -= -=-=-=-=-=-=-=-=- Cisco Career Certification Monthly Statistics Oct-99 Nov-99 Dec-99 Jan-00 Feb-00 Mar-00 Apr-00 May-00 Jun-00 Jul-00 CCNA 22960 29007 35071 39484 44589 50790 56737 64634 73231 90077 CCNP 1475 1830 2272 2658 3128 3598 4331 5024 5960 7505 CCDA 6152 6765 7464 8120 8905 9764 10539 11609 12724 14030 CCDP 651 784 939 1080 1237 1416 1595 1870 2180 2604 CCNA-WAN 192 216 251 287 328 360 428 528 551 594 CCNP-WAN 13 17 26 29 34 37 49 54 62 76 CCDP-WAN 4 5 5 7 11 14 16 18 20 23 Total 31,447 38,624 46,028 51,665 58,232 65,979 73,695 83,737 94,728 114,909 Specialization CCNP-LAN ATM 61 73 81 91 109 127 144 172 200 246 CCNP-Voice 89 120 138 163 209 264 304 393 458 557 CCNP-Security 66 81 92 102 131 162 184 274 316 383 CCNP-Net. Mgmt 1 3 4 7 7 8 9 10 11 15 Total 217 277 315 363 456 561 641 849 985 1201 -- John Hardman, CCNP MCSE+I _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
comparison between checkpoint firewall-1 and cisco pix 525
Hi, Can anyone give me comparisons between checkpoint firewall-1 and cisco pix 525. Agn __ Do You Yahoo!? Yahoo! Shopping - Thousands of Stores. Millions of Products. http://shopping.yahoo.com/ _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Cisco CGS router ?
Part of the old ABC line of routers (CGS, IGS, AGS). Todd Lammle's 2 CCxP books I've been reading have intro's about "cisco Systems" at the beginning and mention these. -- Jason Roysdon, CCNA, MCSE, CNA, Network+, A+ List email: [EMAIL PROTECTED] Homepage: http://jason.artoo.net/ Cisco resources: http://r2cisco.artoo.net/ "John Green" [EMAIL PROTECTED] wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... what is a cisco CGS router ? __ Do You Yahoo!? Yahoo! Calendar - Get organized for the holidays! http://calendar.yahoo.com/ _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Cisco Certification Digest V2 #821
Looks like both sites are using ip unnumbered off their e0/0 interfaces. That would explain the differences in subnets. Makes troubleshooting a bit harder (plus if your e0/0 goes down on either side, so does you serial connectivity), but it works otherwise. -- Jason Roysdon, CCNA, MCSE, CNA, Network+, A+ List email: [EMAIL PROTECTED] Homepage: http://jason.artoo.net/ Cisco resources: http://r2cisco.artoo.net/ "Paul Werner" [EMAIL PROTECTED] wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... your SITE1 BRI0/0 is using 10.30.62.14 (e0/0) your SITE2 BRI0/0 is using 192.168.1.1 (e0/0) Whats wrong with this picture? Now you probably rationalize in your head "but I put dialer map statments!"..that doesn't matter, you can do dialer maps, but both ends of the point to point link must be from the same subnet. Brian made an excellent catch on the configs, and an area that will definitely need to be fixed. The problem is, I do not believe that the catch identified the root problem. I base this on a couple of assumptions. First, I assume that the SPIDs that were listed in the config were not sanitized, i.e. the area codes were not changed. Second, I assume that the ISDN service that has been ordered is not any form of Centrex service which would allow for 4 or 7 digit dialing. If so, then the SPIDs and the dial map statements are using a 7 digit dial number. Since the area code is 202, that spells DC. The DC metro area (unfortunately) is on a 10 digit dial plan. DC itself may not necessarily require 10 digit dialing since they only have one area code. Nevertheless, Verizon is your local ILEC, so you may want to try out your LDNs and dialer map statements with ten digit numbers. See if your router continues to get these lines when you do this: ISDN BR0/0: RX - DISCONNECT pd = 8 callref = 0xCF *Cause i = 0x8091 - User busy* Signal i = 0x04 - Busy tone on ISDN BR0/0: received HOST_DISCONNECT ISDN BR0/0: Event: Call to 7272321 was hung up. ISDN BR0/0: TX - RELEASE pd = 8 callref = 0x4F *Cause i = 0x8091 - User busy* Additionally, I would recommend these changes as well: 1. Hard code an IP address on each end of the BRI link. There are plenty of IP addresses to choose, since you are using private addressing. This should fix the problem that Brian referenced. 2. You may want to clean up your default route statement. Right now you have it pointing to a next hop address which is further pointing to a route covered by another static route pointing to an interface. Just point it to the next hop address, which is the IP address on the BRI line for the other router. 3. Right now, anything IP will bring this link up. Is that really your intent? If not, you may wish to modify the dialer-list command to point it to an access list, which will be much more granular in determining what will bring the link up. If you are on a metered line, this is absolutely essential. 4. Not that it really matters that much, but were you aware that your web server is running on your router? Notwithstanding any security issues, if you are not actually using this method of configuring the router, you may want to turn it off, so it will use less resources. If you are able to retest the line with the changes made to the dialer maps and the LDNs, turn on "debug ppp neg" the next time you attempt to bring the link up and see how the output looks. HTH, Paul Werner Get your own "800" number - Free Free voicemail, fax, email, and a lot more http://www.ureach.com/reg/tag _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Cisco TFTP Server
I've been using it for over two years (well, originally just the tftp server). When I first was getting into Cisco routers, the Cisco provided tftp install program crashed our Win95/98 PCs and wouldn't even install. My boss said to just use the 3Com tftp server as it just worked. In the last year or so I started using the combo ftp/tftp/syslog/ daemon program. Works great. -- Jason Roysdon, CCNA, MCSE, CNA, Network+, A+ List email: [EMAIL PROTECTED] Homepage: http://jason.artoo.net/ Cisco resources: http://r2cisco.artoo.net/ "Brad Beck" [EMAIL PROTECTED] wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... 3com acutally gives away a much nicer win32 tftp/syslog client/server. I actually saw this running on a machine at Cisco in San Jose, and the employee who was using it pointed me to the URL. It can be found here: http://support.3com.com/infodeli/swlib/utilities_for_windows_32_bit.htm -Brad At 02:23 PM 10/24/00 -0400, Lowell Sharrah wrote: http://www.cisco.com/pcgi-bin/tablebuild.pl/tftp Lowell E. Sharrah SBC-DataComm 517-241-7059 wk 517-360-0481 pgr 517-930-1993 cell [EMAIL PROTECTED] "Lopez, Robert" [EMAIL PROTECTED] 10/11/00 09:36AM Group, Has anyone experienced the Cisco online testing site... http://www.cisco.com/pcgi-bin/colt/ColtLogin.pl?MODULEID=2467SUBMIT=Take+T e Thanks in advance for any information. Secondly, are the Boson test engines something to invest in for the CCNP track? Robert M. Lopez Network Planning Ann Arbor Data Center Pfizer Global Research Development Phone 734-622-3948 Fax 734-622-1690 **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: OSPF NSSA problem
Just a suggestion. Have you tried "tagging" the routes coming into the ASBR and then denying them on the ABR with a route map ? Winston. -Original Message- From: Peter Van Oene [mailto:[EMAIL PROTECTED]] Sent: Thursday, November 23, 2000 7:18 PM To: Simon Hope; [EMAIL PROTECTED] Subject: Re: OSPF NSSA problem It is my belief that the P bit is unmodifiable. Type 7's are advertised as 5's to the OSPF domain in almost if not all manufacturers equipment. Although some texts allude to the fact that you can control this behavior with a nob, I've never seen it. Pete *** REPLY SEPARATOR *** On 11/23/2000 at 4:54 PM Simon Hope wrote: Hi guys / gals, Here is an interesting problem that I am struggling with at present Area 4 of my OSPF network is configured as NSSA and has 3 routers in it. Router 1 is the ABR that connects to the backbone, Router 2 is the ASBR that is redistributing some IGRP networks into area 4 and Router 3 is just an internal area 4 router. They are connected together over one ethernet. I would like to set the "P" bit on the type 7 LSA's that the ASBR produces to zero, so that the ABR (r1) will NOT convert these to Type 5's and NOT put them into the backbone (see Doyle, p483 if you dont know what I mean) the closest command I can come up with is the "area 4 nssa no-redistribute" , which I thought would work when I typed it in on R2 (the ASBR) - but this seems to block the production of the type 7 LSA altogether, so that R1 and R3 can no longer see the IGRP routes at all If I type the "area 4 nssa no-redistribute" on the ABR (R1) then this has no effect whatsoever, and the type 7 routes still get converted to type 5, and flooded into the backbone. Doyle says this command should be implemented on the ASBR not a seperate ABR so this doesn't surprise me too much Does anyone know how to do this? _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: CLSC BCMSN
You could compare the outlines for the two exams as well: http://www.cisco.com/warp/public/10/wwtraining/certprog/testing/pdf/clsc.pdf http://www.cisco.com/warp/public/10/wwtraining/certprog/testing/pdf/bcmsn.pd f The entire exam PDF directory is readable, so you can do this for other exams as well: http://www.cisco.com/warp/public/10/wwtraining/certprog/testing/pdf/ Unfortunately, the new exam outlines give even less detail compared to the old, so using both outlines is a good way to go for more detail as to what they're looking for when they give an item. -- Jason Roysdon, CCNA, MCSE, CNA, Network+, A+ List email: [EMAIL PROTECTED] Homepage: http://jason.artoo.net/ Cisco resources: http://r2cisco.artoo.net/ ""jack"" [EMAIL PROTECTED] wrote in message 025301c04d5a$277135a0$[EMAIL PROTECTED]">news:025301c04d5a$277135a0$[EMAIL PROTECTED]... CLSC is the old Switching 1.0 which has been retired as of July 31,2000 and BCMSN is the new Switching 2.0. Jack Svolakis - Original Message - From: Adesope, Olusola (DSPL) [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Monday, November 13, 2000 7:58 AM Subject: CLSC BCMSN Hi folks, Could you please tell me the differences between CLSC and BCMSN (Switching 2.0)? _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: what's the mean of lo0,qfe0 and hme0?
On Fri, 24 Nov 2000, ML wrote: Lo0 is the local interface (127.0.0.1) and Qfe0-3 are the ports on a quad FE card, Hme0 is the built in or standard Ethernet interface on all Sun Boxes. yes, hme0 is the standard Sun ethernet interface, but NOT all of them...it is specifically referring to the 10/100baseTX interface. The 10baseTX interface would be le0...for example in the older boxes such as the sparcstations. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]