[newbie] X Compile Error
Hi All, I have been a way from Linux for a while, owing to too much other stuff happening, and have forgotten a few things :-( I'm trying to compile something, and I keep getting an error about X includes, a la: checking for X... configure: error: Can't find X includes. Please check your installation and add the correct paths! [EMAIL PROTECTED] qsstv-5.3c]# I had this last year, and someone helped me out but I cant remember how I did it! Help! Many thanks, James -- Sent using Mozilla Thunderbird on Mandrake Linux 10.1 100% virus free, as it's nothing to do with Microsoft! 73 de M0TJC Yaesu FT-902DM 100w with quad band nested dipoles Yaesu FT-7800E 50w/40w Dual Band, Watson W20 Vertical Key KM-80 16ch 4m, Dipole Packet: [EMAIL PROTECTED] Mobile: Philips FM1100 2x 5/8 Colinear 70cm Philips FM91 Carphone 1/2wave 2m Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] X Compile Error
Mikkel L. Ellertson wrote: JRH wrote: Hi All, I have been a way from Linux for a while, owing to too much other stuff happening, and have forgotten a few things :-( I'm trying to compile something, and I keep getting an error about X includes, a la: checking for X... configure: error: Can't find X includes. Please check your installation and add the correct paths! [EMAIL PROTECTED] qsstv-5.3c]# I had this last year, and someone helped me out but I cant remember how I did it! Help! Many thanks, James It sounds like you are missing some of the -devel packages. Chances are, you are missing more then just the libxorg-x11-devel package. Mikkel Thanks Mikkel. I knew it would be something as simple as the -devel packages... a quick urpmi soon sorted it. Cheers, James -- Sent using Mozilla Thunderbird on Mandrake Linux 10.1 100% virus free, as it's nothing to do with Microsoft! 73 de M0TJC Yaesu FT-902DM 100w with quad band nested dipoles Yaesu FT-7800E 50w/40w Dual Band, Watson W20 Vertical Key KM-80 16ch 4m, Dipole Packet: [EMAIL PROTECTED] Mobile: Philips FM1100 2x 5/8 Colinear 70cm Philips FM91 Carphone 1/2wave 2m Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] easy urpmi has urPO'd
Something has changed. Go to http://urpmi.org first, then click the easyurpmi link.. I think it's something like easyurpmi.zarb.org or whatever now... Anyway, do it that way initially, and you will have no trouble! HTH, JRH ---Original Message--- From: [EMAIL PROTECTED] Date: 19 September 2004 15:06:01 To: newbie Subject: [newbie] easy urpmi has urPO'd Did I miss something? Has easy urpmi turned up it's toes? Haven't beenable to go there for a few days now - just when I had to rebuild my mainbox too. Murphy does it again!Brian
Re: [newbie] easy urpmi has urPO'd
Sorry I wont bother posting again then You mean this list doesent strip HTML attachments anyway? Oh well, I'll go back to lurking... ---Original Message--- From: [EMAIL PROTECTED] Date: 19 September 2004 16:40:14 To: [EMAIL PROTECTED] Subject: Re: [newbie] easy urpmi has urPO'd On Sunday 19 September 2004 10:15 am, JRH wrote: whackJRH:Do us a favor. Turn off the HTML, and lose the attached jpeg. Neither is appropriate for posting to a mail list.-- cmg
[newbie] Radio Ham Question....
Hi, I know there are a few Radio Hams who lurk on here I'm looking for the Linux equivalent of CWGET, the soundcard morse decoding program. Anybody know of a linux equivalent? 73's, JRH -- Sent using Kmail, on Mandrake Linux 9.2... Kernel 2.6 Microsoft: Which Virus Would You Like to Catch Today? Registered Linux User #340061 73 de M3GXQ Yaesu FT-902DM HF, 40/20/15/10m Dipole Yaesu FT-7800E VHF/UHF, Dual band Co Linear 16:42:12 up 19 min, 1 user, load average: 0.89, 0.87, 0.71 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] avi to MPEG
Hi, Does Linux offer a tool to convert from .avi to .mpeg or .mpg? Most of the stuff thats downloadable is .avi, and I want to get it onto SVCD. I have the SVCD application, I just want to convert.. Thanks, JRH -- Sent using Kmail, on Mandrake Linux 9.2... Kernel 2.6 Microsoft: Which Virus Would You Like to Catch Today? Registered Linux User #340061 73 de M3GXQ Yaesu FT-902DM HF, 40/20/15/10m Dipole Yaesu FT-7800E VHF/UHF, Dual band Co Linear 11:52:20 up 1:34, 1 user, load average: 2.49, 2.51, 2.19 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Emails are being sent with my username but I didn't send them :(
On Saturday 21 Aug 2004 2:47 pm, Terence Golightly wrote: List, Recently, (I don't remeber the date I first saw them) I started receiving emails from mailer daemons and anti-spam and firewall software. I tink someone has hijacked my email addres. I don't know where to turn. I looked through verizon's site but they want me to download a winduz product the to get help from their helpdesk. No can or will do! And of course I can't find an email address on the site (they do a good job of hiding them). So I am turning here. What should I do next? I have kept most of the replies if anyone wants to look at them. It's possible that a spammer has hijacked your email address However Do you use Windows with the same mail address as well as Linux? If you yes, it's possible (though unlikely if you are reasonably clued up), that you have been hit by a worm such as Netsky, and it's bombarding everybody in your address book with itself, and the error messages are mail servers batting it back Or the most likely answer, is that somebody out there is infected with Netsky, who runs windows. Netsky is clever, and mails itself out as a delivery failure message, with either your supposed original email (which you will have never sent!) as an attachment. Curiosity gets the better of you, you click to see the mail you allegedly sent, and bingo, youre infected. Another way it operates, it will send out a message, telling you of an incoming mail failure, and click this link to view the message via webmail. Click it, and youre in trouble!. If you dont have Windows, and it is Netsky or similar, relax. You wont be able to stop the crap from coming in, but you can try cutting it down with a spam filter or such like. I'm getting up to 8 netsky hits a day still. AND IT'S SOMEBODY WHO IS/HAS BEEN ON THIS LIST, AS THIS LIST IS THE ONLY PLACE THIS EMAIL ADDRESS HAS BEEN!! UPDATE YOUR ANTIVIRUS AND BLOODY RUN A SCAN!!! :-) Rant over, JRH -- Sent using Kmail, on Mandrake Linux 9.2... Kernel 2.6 Microsoft: Which Virus Would You Like to Catch Today? Registered Linux User #340061 73 de M3GXQ Yaesu FT-902DM HF, 40/20/15/10m Dipole Yaesu FT-7800E VHF/UHF, Dual band Co Linear 19:23:34 up 6 min, 1 user, load average: 0.71, 0.86, 0.46 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] ClamAV
Ok, I have downloaded and installed it, and it has asked me to set up a user account for Clam, which I have done. However, I cant get it to scan my entire drive, as maybe I am doing something wrong. I know the clamscan command starts it scanning, but it will only seen to scan the current directory which you happen to be in at the time. With F-Prot, you type f-prot / and it will scan the entire drive, including the windows partition. Any ideas what I need to be typing with clam, to get it to do this? Thnaks, JRH -- Sent using Kmail, on Mandrake Linux 9.2... Kernel 2.6 Microsoft: Which Virus Would You Like to Catch Today? Registered Linux User #340061 73 de M3GXQ Yaesu FT-902DM HF, 40/20/15/10m Dipole Yaesu FT-7800E VHF/UHF, Dual band Co Linear 10:30:32 up 1:25, 1 user, load average: 0.55, 0.32, 0.43 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] KDE Headers??
Help! I'm trying to install Apollon v1.0, using the so called all in one installer (all in one pain in the ass so far!). I have had qt and Xfree related probhlems, which I have managed to overcome. Now it is throwing the mother of all errors up And I havent a clue what to do now! Can anybody help? Output is pasted below! Cheers, JRH PS, I am using KDE * Apollon * Running configure (./configure --prefix=/usr --with-extra-includes=/usr/include)... checking build system type... i586-pc-linux-gnu checking host system type... i586-pc-linux-gnu checking target system type... i586-pc-linux-gnu checking for a BSD-compatible install... /usr/bin/install -c checking for -p flag to install... yes checking whether build environment is sane... yes checking for gawk... gawk checking whether make sets $(MAKE)... yes checking for style of include used by make... GNU checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ANSI C... none needed checking dependency style of gcc... gcc3 checking how to run the C preprocessor... gcc -E checking for g++... g++ checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking dependency style of g++... gcc3 checking whether g++ supports -Wmissing-format-attribute... yes checking whether gcc supports -Wmissing-format-attribute... yes checking whether g++ supports -Wundef... yes checking whether g++ supports -Wno-long-long... yes checking whether g++ supports -Wnon-virtual-dtor... yes checking whether g++ supports -fno-exceptions... yes checking whether g++ supports -fno-check-new... yes checking whether g++ supports -fno-common... yes checking whether g++ supports -fexceptions... yes checking how to run the C++ preprocessor... g++ -E checking whether g++ supports -O0... yes checking whether g++ supports -Wl,--no-undefined... yes checking whether g++ supports -Wl,--allow-shlib-undefined... yes not using lib directory suffix checking for a sed that does not truncate output... /bin/sed checking for egrep... grep -E checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for /usr/bin/ld option to reload object files... -r checking for BSD-compatible nm... /usr/bin/nm -B checking whether ln -s works... yes checking how to recognise dependent libraries... pass_all checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking for g77... no checking for f77... no checking for xlf... no checking for frt... no checking for pgf77... no checking for fort77... no checking for fl32... no checking for af77... no checking for f90... no checking for xlf90... no checking for pgf90... no checking for epcf90... no checking for f95... no checking for fort... no checking for xlf95... no checking for ifc... no checking for efc... no checking for pgf95... no checking for lf95... no checking for gfortran... no checking whether we are using the GNU Fortran 77 compiler... no checking whether accepts -g... no checking the maximum length of command line arguments... 32768 checking command to parse /usr/bin/nm -B output from gcc object... ok checking for objdir... .libs checking for ar... ar checking for ranlib... ranlib checking for strip... strip checking if gcc static flag works... yes checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC checking if gcc PIC flag -fPIC works... yes checking if gcc supports -c -o file.o... yes checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking for shl_load... no checking for shl_load in -ldld... no checking for dlopen... no checking for dlopen in -ldl... yes checking whether a program can dlopen itself... yes checking whether a statically linked program can dlopen itself... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no configure: creating libtool appending configuration tag CXX to libtool checking for ld used by g++... /usr/bin/ld checking if the linker (/usr
[newbie] DrWeb
Hi all, I've been following the thread about Security etc, with interest. At the moment, I use F-Prot for Linux, run from the command line. I installed DrWeb a good while back, and it gave me an extra account at login, but no password. I take it this is commercial software, and to obtain the password to be able to use it, I have to purchase it or similar? Please enlighten me! JRH PS, every time I have looked at the DrWeb site, It's been in Russian, and I havent been able to get the english version to work! -- Sent using Kmail, on Mandrake Linux 9.2... Kernel 2.6 Microsoft: Which Virus Would You Like to Catch Today? Registered Linux User #340061 73 de M3GXQ Yaesu FT-902DM HF, 40/20/15/10m Dipole Yaesu FT-7800E VHF/UHF, Dual band Co Linear 20:05:52 up 1:32, 1 user, load average: 1.80, 1.40, 1.18 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] KMail 1.5.3
Hi, I use Kmail 1.5.3 on 9.2, and I have noticed, it is sending forwards as an attachment I have had a look, and cant see how to stop it... Any ideas? Thanks, JRH -- Sent using Kmail, on Mandrake Linux 9.2... Kernel 2.6 Microsoft: Which Virus Would You Like to Catch Today? Registered Linux User #340061 73 de M3GXQ Yaesu FT-902DM HF, 40/20/15/10m Dipole Yaesu FT-7800E VHF/UHF, Dual band Co Linear 15:25:16 up 26 min, 1 user, load average: 2.63, 2.30, 1.82 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] BitTorrent Not working
Hi all, I have just gone back to 9.2 from 10CE, and I am still getting BT and BTGUI playing up on me. When I double click a .torrent file, I get an error message saying that KDEinit couldnt find the BitTorrent executable I have checked, and the folder /usr/lib/bittorrent exists, but it contains all python .py files, amog a few others. Nothing else shows up. Any ideas? I have installed BT from the distro CD. JRH -- Sent using Kmail, on Mandrake Linux 9.2... Kernel 2.6 Microsoft: Which Virus Would You Like to Catch Today? Registered Linux User #340061 73 de M3GXQ Yaesu FT-902DM HF, 40/20/15/10m Dipole Yaesu FT-7800E VHF/UHF, Dual band Co Linear 22:38:00 up 1:03, 1 user, load average: 0.34, 1.05, 1.30 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] 9.2 Torrent
Hi All, My CD1 of my 9.2 install set is buggered. Does anyone know where I can lay my hands on a .torrent file for LM9.2 CD1, pref ISO file? Many thanks, JRH
Re: [newbie] 9.2 Torrent
ftp://ftp.univ-lille1.fr/pub/os/linux/distributions/mandrakelinux/ official/iso/i586/9.2/ Thanks for that link! I clicked the one on the LM site, redbox.cz, and got about 8k/s! this one is tanking along quite nicely... Thanks! JRH - Original Message - From: PM [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Monday, August 02, 2004 7:08 PM Subject: Re: [newbie] 9.2 Torrent On Sat, 2004-07-31 at 20:35, JRH wrote: Hi All, My CD1 of my 9.2 install set is buggered. Does anyone know where I can lay my hands on a .torrent file for LM9.2 CD1, pref ISO file? Many thanks, JRH There won't be any advantage in a .torrent file for this, they are only useful when there's a large number of downloaders. The torrent also downloads all CD isos. You can still get the full 9.2.1 distribution as a torrent at the club download page, or an iso for individual cds from the mandrake mirrors (they'll take you to 10, but move up to a higher level and then choose 9.2 (e.g. ftp://ftp.univ-lille1.fr/pub/os/linux/distributions/mandrakelinux/ official/iso/i586/9.2/ -- pm The important thing is not to stop questioning. Albert Einstein Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Getting online with DSL modem
that says JR something like, SIOCDELRT not found. I don't think those are the actual JR words to the error message, but the general idea. What is SIOCDELRT? I'm having exactly the same problem with 10OE the Speedtouch 330 DSL Modem (albeit USB). It works fine under 9.2 10CE, but not official. I'm quite eager to know what SIOCDELRT is as thats what I get when I try to run the modem SIOCDELRT: No Such Process and then the connection attempt fails. Hopefully some brainy Linux guru out there can enlighten us all! JRH Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Still Wrestling With Speedtouch
Well, I have reinstalled the driver from source (and not the RPM that came with the distro, and I'm not getting the kernel error message in drakconnect now). I have delved into the logs, and come up with the following boomph. Can anyone dechipher it? Cheers, JRH Jul 22 16:23:21 localhost modem_run[5922]: modem_run version 1.2-beta3 started by root uid 0 Jul 22 16:23:23 localhost kernel: usb_control/bulk_msg: timeout Jul 22 16:23:23 localhost kernel: usbdevfs: USBDEVFS_BULK failed dev 2 ep 0x85 len 512 ret -110 Jul 22 16:23:48 localhost modem_run[5923]: [monitoring report] ADSL link went up Jul 22 16:24:06 localhost modem_run[5922]: ADSL synchronization has been obtained Jul 22 16:24:06 localhost modem_run[5922]: ADSL line is up (576 kbit/s down | 288 kbit/s up) Jul 22 16:24:08 localhost kernel: HDLC line discipline: version $Revision: 3.7 $, maxframe=4096 Jul 22 16:24:08 localhost kernel: N_HDLC line discipline registered. Jul 22 16:24:08 localhost kernel: CSLIP: code copyright 1989 Regents of the University of California Jul 22 16:24:08 localhost kernel: PPP generic driver version 2.4.2 Jul 22 16:24:08 localhost pppd[5931]: pppd 2.4.1 started by root, uid 0 Jul 22 16:24:09 localhost pppoa3[5932]: pppoa3 version 1.2-beta3 started by root (uid 0) Jul 22 16:24:09 localhost pppoa3[5932]: Control thread ready Jul 22 16:24:09 localhost pppoa3[5943]: host -- pppoa3 -- modem stream ready Jul 22 16:24:09 localhost pppoa3[5944]: modem -- pppoa3 -- host stream ready Jul 22 16:24:09 localhost pppd[5931]: Using interface ppp0 Jul 22 16:24:09 localhost pppd[5931]: Connect: ppp0 -- /dev/pts/2 Jul 22 16:24:29 localhost drakconf.real[6024]: ### Program is starting ### Jul 22 16:24:40 localhost pppd[5931]: LCP: timeout sending Config-Requests Jul 22 16:24:40 localhost pppd[5931]: Connection terminated. Jul 22 16:24:40 localhost pppoa3[5943]: Error reading from source device Jul 22 16:24:40 localhost pppoa3[5932]: Woken by a sem_post event - Exiting Jul 22 16:24:40 localhost pppoa3[5932]: Write to usb Canceled Jul 22 16:24:40 localhost pppoa3[5932]: Exiting Jul 22 17:03:53 localhost network: Bringing up loopback interface: succeeded Jul 22 17:03:53 localhost net_cnx_up: SIOCDELRT: No such process Jul 22 17:03:53 localhost net_cnx_up: Starting ADSL connection: Jul 22 17:03:53 localhost modem_run[851]: modem_run version 1.2-beta3 started by root uid 0 Jul 22 17:04:26 localhost modem_run[1147]: [monitoring report] ADSL link went up Jul 22 17:04:45 localhost modem_run[851]: ADSL synchronization has been obtained Jul 22 17:04:47 localhost pppd[1258]: pppd 2.4.1 started by root, uid 0 Jul 22 17:04:47 localhost pppd[1258]: Connect: ppp0 -- /dev/pts/0 Jul 22 17:04:47 localhost pppoa3[1259]: pppoa3 version 1.2-beta3 started by root (uid 0) Jul 22 17:04:48 localhost modem_run[1147]: [monitoring report] ADSL link stays stable (up) Jul 22 17:04:49 localhost pppoa3[1381]: host -- pppoa3 -- modem stream ready Jul 22 17:05:20 localhost pppd[1258]: Connection terminated. Jul 22 17:05:20 localhost pppoa3[1381]: Error reading from source device Jul 22 17:06:26 localhost pppoa3[2387]: pppoa3 version 1.2-beta3 started by root (uid 0) Jul 22 17:06:26 localhost pppoa3[2387]: Control thread ready Jul 22 17:06:27 localhost pppoa3[2469]: host -- pppoa3 -- modem stream ready Jul 22 17:06:27 localhost pppoa3[2470]: modem -- pppoa3 -- host stream ready Jul 22 17:18:26 localhost pppoa3[8054]: Error reading from source device Jul 22 17:18:26 localhost pppoa3[7980]: Woken by a sem_post event - Exiting Jul 22 17:18:26 localhost pppoa3[7980]: Write to usb Canceled Jul 22 17:18:26 localhost pppoa3[7980]: Exiting Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] CD ROM's Not Mounting Up
Hi All, I went up to 10OE yesterday, and now my CD ROM drives arent automounting. If youre installing something, and Mandrake asks for something, it will open the drawer and load from the CD ok. However, stick a cd in, and that's it, no desktop icon, and if you go into /mnt/cdrom/, just a blank page. How can I turn Automount on? I have looked, but cant see! Many thanks, JRH -- Sent using Kmail, on Mandrake Linux 10 Official Microsoft: Which Virus Would You Like to Catch Today? Registered Linux User #340061 73 de M3GXQ Yaesu FT-902DM HF, 40/20/15/10m Dipole Yaesu FT-7800E VHF/UHF, Dual band Co Linear 13:54:40 up 12:43, 0 users, load average: 1.50, 1.23, 0.95 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] SIOCDELRT??
What is SIOCDELRT? Any Ideas? I'm having the old Mandrake 10OE v Speedtouch USB Battle again! It worked ok, on an upgrade from CE to OE, so I decided to do a clean install. Now I am getting an error on bootup and shutdown, when it comes to the internet connection. I get SIOCDELRT: NO SUCH PROCESS, and the inevitable failure of the internet connection. Can anyone throw any light on this? Many thanks, JRH
Re: [newbie] OT: Bordem ;-)
Also, go back to the early 1970's.. Anyone remember the group Deep Purple?? Why did they call their track Mandrake Root?? did they know something way back then? JRH - Original Message - From: PM [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Monday, July 19, 2004 12:34 PM Subject: Re: [newbie] OT: Bordem ;-) On Mon, 2004-07-19 at 12:49, John Richard Smith wrote: Marc Hultquist wrote: What does Mandrake actually mean ? Was just thinking about it now and well while apache 2.x compiles I thought I would see what I could find out. Its unfortunately to slow for me to browse the net right now :\ Anyone care to shed some light on this ? I believe it was used in english medieval times for medicinal purposes. I expect it was an early ruling class version of coke. John Don't forget also that King Features sued Mandrake last year over the use of the name - 'Mandrake the Magician', seems everybody had been confusing the distribution with the comic strip. (That's why I couldn't get 'The Gimp' to work!). *** http://www.channel4.com/science/microsites/R/real_wizards/witches_t.html describes mandrake's use by witches - a witch I knew 30 years ago was using it (he ground it to a paste rubbed it on his temples). Through the ages, magic often involved taking drugs and seeing things. Where the druids had ergot and the shamans had mushrooms, witches had mandrake. The mandrake has long been regarded as having magical properties, perhaps because its forked root gives the plant a human-like shape. According to tradition, the plant would scream when it was pulled out of the ground. Consequently, mandrake was not dug up by hand; instead, a dog would be harnessed to the root and encouraged to drag it out of the ground. The mysteries of the mandrake are not limited to its shape. It is related to henbane and deadly nightshade. All three contain a number of very powerful alkaloids. When absorbed into the body, these chemical substances can cause double vision, hallucination and even coma. With their knowledge of the effects of mandrake, witches would have been able to dose themselves to produce the required effects without risking their lives. The witch's cauldron would have been used to boil the herbs in a fatty solution; this produced an ointment that the witch would smear on her body. A trance-like state would follow, with the witch experiencing sensations of flying - this is probably the origin of the familiar imagery of witches flying on broomsticks. Witches, like druids and shamans before them, derived some of their authority from their apparent ability to travel into another world. -- pm The enemy is anybody who's going to get you killed, no matter which side he's on. Joseph Heller, Catch 22 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] qt3 libJpeg Errors...
Hi, I'm trying to install a program from source (qsstv, used for sending still images over radio), and Im getting qt3 and libjpeg errors. It's funny, as I'm trying to install Apollon from source, and getting exactly the same error. I'm running 10CE, with every available update installed. Can anyone tell me where things are going wrong? config.log and shell output is pasted below. Many Thanks, JRH int main() { jpeg_CreateDecompress(0L, 0, 0); ; return 0; } configure: 5248: /usr/include/jpeglib.h configure: 5248: /usr/local/include/jpeglib.h configure:5362: checking for Qt configure: 5424: /usr/lib/qt3//include/qstyle.h configure: 5424: /usr/lib/qt3//qstyle.h configure: 5424: /usr/lib/qt2/include/qstyle.h configure: 5424: /usr/lib/qt2/qstyle.h configure: 5424: /usr/lib/qt/include/qstyle.h configure: 5424: /usr/lib/qt/qstyle.h configure: 5424: /usr/local/qt/include/qstyle.h configure: 5424: /usr/include/qt/qstyle.h configure: 5424: /usr/include/qstyle.h configure: 5424: /usr/X11R6/include/X11/qt/qstyle.h configure: 5424: /usr/X11R6/include/qt/qstyle.h configure: 5424: /usr/X11R6/include/qt2/qstyle.h configure: 5424: /usr/X11R6/include/qstyle.h tried NO tried /usr/lib/qt3//lib tried /usr/lib/qt3/ tried /usr/lib/qt2/lib tried /usr/lib/qt2 tried /usr/lib/qt/lib tried /usr/lib/qt tried /usr/X11R6/lib tried /usr/lib tried /usr/local/qt/lib tried /usr/X11R6/lib configure:5523: rm -rf SunWS_cache; c++ -o conftest -O2 -fno-exceptions -fno-check-new -INO -I/usr/X11R6/include -LNONE -L/usr/X11R6/lib conftest.C -lqt -lpng -lz -lm -lXext -lX11 -lSM -lICE -lresolv 15 conftest.C:2:21: qglobal.h: No such file or directory conftest.C:3:26: qapplication.h: No such file or directory conftest.C:4:20: qevent.h: No such file or directory conftest.C:5:21: qstring.h: No such file or directory conftest.C:6:20: qstyle.h: No such file or directory conftest.C:7:23: qiconview.h: No such file or directory conftest.C:9:2: #error 1 configure: failed program was: #include confdefs.h #include qglobal.h #include qapplication.h #include qevent.h #include qstring.h #include qstyle.h #include qiconview.h #if ! (QT_VERSION = 222) #error 1 #endif int main() { QStringList *t = new QStringList(); QIconView iv(0); iv.setWordWrapIconText(false); QString s; s.setLatin1(Elvis is alive, 14); int magnolia = QEvent::Speech; /* new in 2.2 beta2 */ return 0; } And the shell output: (the relevant bit, anyhows!) checking for X... libraries /usr/X11R6/lib, headers /usr/X11R6/include checking for IceConnectionNumber in -lICE... yes checking for libXext... yes checking for Xinerama... no checking for libpng... -lpng -lz -lm checking for libjpeg6b... no checking for libjpeg... no configure: warning: libjpeg not found. disable JPEG support. checking for Qt... configure: error: Qt (= Qt 2.2.2) (headers and libraries) not found. Please check your installation! For more details about this problem, look at the end of config.log. [EMAIL PROTECTED] qsstv-5.1a]# Libqt libjpeg are showing as installed on my system! Help! -- Sent using Kmail, on Mandrake Linux 10CE Microsoft: Which Virus Would You Like to Catch Today? Registered Linux User #340061 73 de M3GXQ Yaesu FT-902DM HF, 40/20/15/10m Dipole Yaesu FT-7800E VHF/UHF, Dual band Co Linear 15:15:00 up 1:06, 0 users, load average: 0.56, 0.59, 0.63 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] qt3 libJpeg Errors...
On Monday 19 Jul 2004 16:20, Dan Gordon wrote: So what it says is it needs qt 2.2.2 in order to compile. You probably have a newer version of qt on your system so the configure script stops when it does not find the right version. For libjpeg you are probably missing a devel file such as libjpeg-devel-x HTH Regards, Dan Gordon Hi Dan, Yes, the libjpeg was an error on my part, and the appropriate devel installed, got over the problem. However, on the qt front, I do indeed have a newer version of qt installed. The problem being, I cant install the earlier version, as in order to do so, software installer wants to remove virtually the whole of KDE, owing to dependencies. Looks like it's going to be a non starter then! Cheers, JRH -- Sent using Kmail, on Mandrake Linux 10CE Microsoft: Which Virus Would You Like to Catch Today? Registered Linux User #340061 73 de M3GXQ Yaesu FT-902DM HF, 40/20/15/10m Dipole Yaesu FT-7800E VHF/UHF, Dual band Co Linear 17:31:22 up 19 min, 0 users, load average: 0.53, 0.66, 0.46 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] 10 Official Speedtouch USB
It would appear that I have found a solution to the problem! I know there are a few people who have had problems getting 10OE on the net with the Alcatel Speedtouch USB ADSL modem, so this is how I did it! Before upgrading, go to one of the 10 Community update FTP sites, and get a copy of the Speedtouch Beta RPM (must be this one, the one on the 10CE CD wont work), and the updated PPP and PPP_PPPOA RPM's. Upgrade, and then use RpmDrake to uninstall the Speedtouch, ppp and ppp_pppoa packages that came with 10 Official. Use Software installer to install the 3 new RPM's (just double click the RPM files). Job done. Go into Drakconf, and enter New Connection, and set up the connection as you normally would. Job done. To test, in a console, as root, go to /usr/share/speedtouch/ and make sure that mgmt.o is still there. If it is, type ./speedtouch.sh start. You should be on the net! JRH -- Sent using Kmail, on Mandrake Linux 10CE Microsoft: Which Virus Would You Like to Catch Today? Registered Linux User #340061 73 de M3GXQ Yaesu FT-902DM HF, 40/20/15/10m Dipole Yaesu FT-7800E VHF/UHF, Dual band Co Linear 17:31:49 up 20 min, 0 users, load average: 0.48, 0.63, 0.46 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] X Includes....
Hi, I'm trying to compile/install something, and it's tripping up. See pasting below! checking for X... configure: error: Can't find X includes. Please check your installation and add the correct paths! [EMAIL PROTECTED] qsstv-5.1a]$ I've had this error before, last year, whilst trying to install Apollon from source. I installed something to rectify it, but I cant for the life of me remember what it was! Can anyone throw some suggestions at me? Many thanks, JRH -- Sent using Kmail, on Mandrake Linux 10CE Microsoft: Which Virus Would You Like to Catch Today? Registered Linux User #340061 73 de M3GXQ Yaesu FT-902DM HF, 40/20/15/10m Dipole Yaesu FT-7800E VHF/UHF, Dual band Co Linear 12:49:46 up 3:00, 0 users, load average: 1.13, 1.24, 1.13 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Re: Rusty Morse.
On Sunday 20 Jun 2004 20:31, PM wrote: I am a digital sort of guy, rtty, gtor pactor amtor I'm not long Licensed.. and currently active on 2m 70cm, and soon to be 6m too An HF set is on order! I will be doing everything, but mainly SSTV, and APRS packet on the data side. CW is an option too... and I'm practising hard! JRH -- Sent using Kmail, on Mandrake Linux 10CE Microsoft: Which Virus Would You Like to Catch Today? Registered Linux User #340061 73 de M3GXQ 20:39:12 up 3:29, 0 users, load average: 0.92, 0.67, 0.45 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] 10CE USB Printers
Hi all, I gotta buy a new printer, as my old HP 510 has finally died. I've got my eye on a Lexmark USB version (cos it's cheap!) and my neighbour has one, and it works ok for him, but on Windows. Has anyone had any Mandrake and USB printer experience? Will it work on 10CE without a huge amount of upheaval? I dont want to go buy it and find I gotta go into Windoze to use it :-) JRH -- Sent using Kmail, on Mandrake Linux 10CE Microsoft: Which Virus Would You Like to Catch Today? Registered Linux User #340061 73 de M3GXQ 10:31:40 up 26 min, 0 users, load average: 0.54, 0.39, 0.44 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] CD burn verify
This isn't the first time I've installed MDK 10.0 (network upgrade from 9.2), and I'm beginning to suspect the CD is corrupt I have major problems when installing 10 from scratch (ie freshly formatted drive) also. I have 2 different CD sets from 2 different sources here, and the same happens with both. Normally it all goes wrong after the files have been copied, and it prompts you to enter the new root password. Enter it, and click ok, and the whole system just locks up, and the only way to get it back is to reboot, and then the install is totally shot, as X hasnt even been installed by that stage.. The only way I have found around it, is to intall 9.2 first, and then upgrade from 9.2 to 10. Unless anyone has any better ideas? JRH - Original Message - From: Marc Lijour [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Friday, June 18, 2004 9:03 PM Subject: Re: [newbie] CD burn verify Le June 18, 2004 03:47 pm, Scott Mazur a écrit : OK, so I downloaded the ISOs for Mandrake 10.0, and the MD5s all check out. I burned each one to CDROM without any reported problems, but I'm having a heck of a time trying to install on particular box I've got (crashes randomly at the point of installing software). This isn't the first time I've installed MDK 10.0 (network upgrade from 9.2), and I'm beginning to suspect the CD is corrupt so I googled for some method to compare the CD against the ISO, but came up with scratch. Is there an easy way to verify a burned CD against the original ISO? k3b has an option check and it calculates the md5sum. Scott -- Nothing goes to waste when Little Fish are near! (http://www.littlefish.ca) Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] A friend with sympa problems
I'm still getting the delivery failure notifications I post to the group, and my message comes through, and is on the group. Then 10 minutes later, I get a delivery failure message. What is up? JRH -- Sent using Kmail, on Mandrake Linux 10CE Microsoft: Which Virus Would You Like to Catch Today? Registered Linux User #340061 20:05:51 up 3:00, 0 users, load average: 0.89, 1.09, 1.06 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Warning to windows users - virused message (Re: document)
I had that particular one in my inbox too. But it came direct, not via the group. Same from address and all.. JRH - Original Message - From: John [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Friday, June 04, 2004 4:11 PM Subject: Re: [newbie] Warning to windows users - virused message (Re: document) This email contained the [EMAIL PROTECTED] virus. [EMAIL PROTECTED] wrote: Please read the document. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] rar
I'm running ARK on KDE, and it seems to handle .rar very well. I havent actually tried to create a rar archive with it yet, but I know it works ok for opening! JRH -- Sent using Kmail, on Mandrake Linux 10CE In a world without walls, we dont need Windows and Gates Registered Linux User #340061 16:07:08 up 59 min, 0 users, load average: 0.60, 0.34, 0.29 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Community to Official?
On Tuesday 25 May 2004 11:37, robin wrote: If it ain't broken, don't fix it. As far as I can tell, there are no major upgrades in Official, just bugfixes. I'd recommend installing security-related updates, though If you have the Alcatel/Thomson Speedtouch USB ADSL modem, then i'd stick with 10CE.. I upgraded to 10OE, and no way in the world could I get it to work... it works fine under 9.2 and 10CE.. but not OE for some reason! Still trying to find a wqay round it! JRH Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] KDE Configure/Make errors
Hi all. I'm having trouble installing stuff using the ./configure command (from tarballs etc. Everything appears to be going well, then suddenly, it will throw up and error. The shell output is pasted below (well, the last few lines, anyhow). Can anybody tell me what I havent got installed, that it probably needs? I had this whilst trying to install something different yesterday as well... checking if Qt compiles without flags... no checking for moc... /usr/lib/qt3//bin/moc checking for uic... /usr/lib/qt3//bin/uic checking whether uic supports -L ... yes checking whether uic supports -nounload ... yes checking if Qt needs -ljpeg... no checking for rpath... yes checking for KDE... configure: error: in the prefix, you've chosen, are no KDE headers installed. This will fail. So, check this please and use another prefix! [EMAIL PROTECTED] klog-0.2.9]$ Any Ideas? Thanks, JRH Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] KDE Configure/Make errors
On Monday 24 May 2004 17:52, Greg Meyer wrote: Either you don't have the right libraries installed or the ones you need are in a different location than the Makefile has specified them in (sometimes mdk moves stuff). What are you trying to install from source. Have you checked the contrib repository to see if the software you are trying to compile has already been packaged for mandrakelinux. -- /g Hi Greg, Someone did suggest I didnt have the Devel files for KDE installed, but I have everything with the word devel installed (well, that is relevant to KDE!). I'm trying to install an Amateur Radio contact logging program, which are basically written by Home Writers, and dont get packaged, as they arent generally that widely used. If I cant get it sorted, I may have to download and use a windows application (AAARRRGHGHH!!) JRH Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] 10OE and Speedtouch USB ADSL
Hi all.. I posted last week about the lack of functionality of the Alcatel Speedtouch 330 USB ADSL modem under 10 OE. I have tried everything to get it to work. With no success! It works fine under 9.2 and 10 CE, so why not 10 OE? Can anybody throw any further pointers at me? I have tried the 9.2 and 10 CE RPM's, in the hope that it worked under those 2 editions, it should work under 10 OE... not the case! Would there be any logs to indicate where the problems lie? I'm getting no error messages when I try to boot in terminal (./speedtouch.sh start), just the red failure mesage. Normally, on boot/network start, both lights on the modem begin to flash, with the USB light coming a steady green, then the ADSL light will come a steady green when connected. Now, the USB flashes, and the ADSL goes a solid yellow, and thats that. Help, I havent got much hair, but at this rate, I'll be totally bald! Many thanks, JRH
Re: [newbie] 10 Official and Speedtouch ADSL......
snipThis is only for 10CEbut the only way that I found worked was with mgmt.o on floppy, letting Drak copy it to wherever it wanted./snip With 10CE, it would read it from the floppy, but wouldnt save it anywhere at all. I used to have to manually copy it across to /usr/share/speedtouch/ JRH (using XP and hating every minute of it!) - Original Message - From: Owain Sutton [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Tuesday, May 11, 2004 12:20 AM Subject: Re: [newbie] 10 Official and Speedtouch ADSL.. This is only for 10CEbut the only way that I found worked was with mgmt.o on floppy, letting Drak copy it to wherever it wanted. JRH wrote: Can anyone tell me what I need to do to get my Speedtouch 330 USB ADSL modem to work under 10 official? I upgraded, and for some reason, the files are still in the /usr/share/speedtouch/ folder (speedtouch.sh and mgmt.o), but the modem wont start. If I open up a terminal and cd to the /usr/share/speedtouch/ folder, and type ./speedtouch.sh start, the modem lights will flash away as if something is going on, but then I get a red failure message. No backtrace or anything. Can anyone pinpoint the problem? Oh yes, and when I go into drakconnect to configure the connection, I click on speedtouch USB, and I get a little warning pop up, saying sorry we only support kernel 2.4 and higher. eh?? I'm on a 2.4 kernel! Cheers, JRH Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] 10 Official and Speedtouch ADSL......
snipThis is only for 10CEbut the only way that I found worked was with mgmt.o on floppy, letting Drak copy it to wherever it wanted./snip With 10CE, it would read it from the floppy, but wouldnt save it anywhere at all. I used to have to manually copy it across to /usr/share/speedtouch/ JRH (using XP and hating every minute of it!) - Original Message - From: Owain Sutton [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Tuesday, May 11, 2004 12:20 AM Subject: Re: [newbie] 10 Official and Speedtouch ADSL.. This is only for 10CEbut the only way that I found worked was with mgmt.o on floppy, letting Drak copy it to wherever it wanted. JRH wrote: Can anyone tell me what I need to do to get my Speedtouch 330 USB ADSL modem to work under 10 official? I upgraded, and for some reason, the files are still in the /usr/share/speedtouch/ folder (speedtouch.sh and mgmt.o), but the modem wont start. If I open up a terminal and cd to the /usr/share/speedtouch/ folder, and type ./speedtouch.sh start, the modem lights will flash away as if something is going on, but then I get a red failure message. No backtrace or anything. Can anyone pinpoint the problem? Oh yes, and when I go into drakconnect to configure the connection, I click on speedtouch USB, and I get a little warning pop up, saying sorry we only support kernel 2.4 and higher. eh?? I'm on a 2.4 kernel! Cheers, JRH Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] 10 Official and Speedtouch ADSL......
Can anyone tell me what I need to do to get my Speedtouch 330 USB ADSL modem to work under 10 official? I upgraded, and for some reason, the files are still in the /usr/share/speedtouch/ folder (speedtouch.sh and mgmt.o), but the modem wont start. If I open up a terminal and cd to the /usr/share/speedtouch/ folder, and type ./speedtouch.sh start, the modem lights will flash away as if something is going on, but then I get a red failure message. No backtrace or anything. Can anyone pinpoint the problem? Oh yes, and when I go into drakconnect to configure the connection, I click on speedtouch USB, and I get a little warning pop up, saying sorry we only support kernel 2.4 and higher. eh?? I'm on a 2.4 kernel! Cheers, JRH
[newbie] Kaj... Danish text for you!
Kaj, I have lost your email address I have the Danish ready for translation if you could mail me, I will send it through I know it has Haulrich in it though! Many thanks, JRH -- Sent using Kmail, on Mandrake Linux 10 Community Exposing Microsoft products directly to the internet, is a bit like painting a large bullseye on your butt, and bending over, naked, in a San Francisco steam room. Except, Microsoft isnt nearly as safe Registered Linux User #340061 ICQ: #86015236 Yahoo!: v6vitanic 20:41:44 up 55 min, 1 user, load average: 0.69, 0.59, 0.48 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Mandrake 10.0 CE does not properly shutdown
On Thursday 06 May 2004 03:01, G-Love wrote: Installed 10.0CE a few days ago and am quite happy. However, I can't get my machine to properly shutdown. It hangs while unloading some USB drivers (unfortunately I don't have the exact message). However I think I've seen some posts about this being an improper USB patch in the 10.0 kernel. BTW, I'm running kernel v2.6.3-9. Otherwise, everything works fine, but this is a bit annoying. -Greg Greg, As a temporary measure, to shutdown, open up a terminal and type poweroff and hit enter. to reboot, just type reboot and enter. I have this problem, and thats how I overcome it..!! JRH -- Sent using Kmail, on Mandrake Linux 10 Community Exposing Microsoft products directly to the internet, is a bit like painting a large bullseye on your butt, and bending over, naked, in a San Francisco steam room. Except, Microsoft isnt nearly as safe Registered Linux User #340061 ICQ: #86015236 Yahoo!: v6vitanic 16:09:16 up 20 min, 1 user, load average: 0.58, 0.47, 0.51 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] Translation Assistance!
Anyone on here Danish? I have a short bit of text that is written in Danish and I need it translating to English! I have tried Babelfish on the Altavista site, but for some reason, it dont want to play with Danish! Many thanks, JRH
Re: [newbie] Translation Assistance!
Nope translate.ru dont play with Danish either! JRH - Original Message - From: Alex Brooks To: [EMAIL PROTECTED] Sent: Wednesday, May 05, 2004 5:23 PM Subject: Re: [newbie] Translation Assistance! JRH wrote: Anyone on here Danish? I have a short bit of text that is written in Danish and I need it translating to English! I have tried Babelfish on the Altavista site, but for some reason, it dont want to play with Danish! Many thanks, JRHTry translate.ru
Re: [newbie] Delivery failure notice (ID-00003CB3)
Alex, I got the same thing a couple of hours back. Someone is infected.. JRH - Original Message - From: Alex Brooks To: [EMAIL PROTECTED] Sent: Wednesday, May 05, 2004 7:21 PM Subject: Re: [newbie] Delivery failure notice (ID-3CB3) [EMAIL PROTECTED] wrote: --- Mail Part Delivered --- 220 Welcome to [linux-mandrake.com] Mail type: multipart/related --- text/html RFC 2504 MX [Mail Exchanger] mx.mt2.kl.linux-mandrake.com Exim Status OK. External message is available. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com Umm Netsky Virus? you might want to clean ur machine.
Re: [newbie] Took the plunge - CUZ I HAD TO
On Monday 03 May 2004 12:15, Lanman wrote: but now we're getting way into things that have little or no value to the majority of list-members. It would certainly be appreciated. And I could do with my inbox not being quite so full with what is well... you judge! JRH -- Sent using Kmail, on Mandrake Linux 10 Community Exposing Microsoft products directly to the internet, is a bit like painting a large bullseye on your butt, and bending over, naked, in a San Francisco steam room. Except, Microsoft isnt nearly as safe Registered Linux User #340061 ICQ: #86015236 Yahoo!: v6vitanic 13:16:43 up 3:03, 1 user, load average: 2.67, 2.78, 3.05 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] K3B
On Saturday 01 May 2004 09:00, [EMAIL PROTECTED] wrote: So Maybe it is a hardware problem with you? Dont think so.. It'll actually burn at 24x, the max speed of the burner. It's a Philips CDRW2400 series, and cost quite a bit a while back. I think I've solved it. Just remove Any letter K in the filename, and dont let it spin too quickly. I'm going to try another one now, just to make sure it wasnt a fluke! JRH -- Sent using Kmail, on Mandrake Linux 10 Community Exposing Microsoft products directly to the internet, is a bit like painting a large bullseye on your butt, and bending over, naked, in a San Francisco steam room. Except, Microsoft isnt nearly as safe Registered Linux User #340061 ICQ: #86015236 Yahoo!: v6vitanic 09:51:43 up 9 min, 1 user, load average: 3.82, 3.22, 1.76 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] SETI
Hi all, I have seen people here and in other places taling about SETI. I'm well aware of who they are, and what they do etc. How can I come by the software to allow me to give some unused bandwidth? JRH -- Sent using Kmail, on Mandrake Linux 10 Community Exposing Microsoft products directly to the internet, is a bit like painting a large bullseye on your butt, and bending over, naked, in a San Francisco steam room. Except, Microsoft isnt nearly as safe Registered Linux User #340061 ICQ: #86015236 Yahoo!: v6vitanic 17:13:29 up 1:35, 1 user, load average: 0.55, 0.50, 0.27 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] SETI
On Saturday 01 May 2004 17:23, Paul wrote: Have a look at http://setiathome.ssl.berkeley.edu/ Paul Thanks Paul. I was just having a trawl of the SETI site trying to find it! JRH -- Sent using Kmail, on Mandrake Linux 10 Community Exposing Microsoft products directly to the internet, is a bit like painting a large bullseye on your butt, and bending over, naked, in a San Francisco steam room. Except, Microsoft isnt nearly as safe Registered Linux User #340061 ICQ: #86015236 Yahoo!: v6vitanic 17:26:30 up 1:48, 1 user, load average: 0.72, 0.35, 0.28 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] 10.0 CE printing problems
On Friday 30 Apr 2004 17:32, Ron Hunter-Duvar wrote: I can't get my printer, an HP Deskjet 845c, to print from 10.0CE I got an old HP DJ520... It's that old, you have to wait for it to get steam up first! Mine wouldnt print, until I installed package HPOJ. It shouldnt have needed it, but it did! When you run the printer installation wizard, it will throw up a little window, asking if your printer is one of a few types, a couple of them being HP Laserjet and OfficeJet. Click yes, and it will install the HPOJ package. Give it a try, it worked for me! JRH -- Sent using Kmail, on Mandrake Linux 10 Community Exposing Microsoft products directly to the internet, is a bit like painting a large bullseye on your butt, and bending over, naked, in a San Francisco steam room. Except, Microsoft isnt nearly as safe Registered Linux User #340061 ICQ: #86015236 Yahoo!: v6vitanic 18:57:48 up 3:42, 1 user, load average: 0.23, 0.24, 0.42 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] K3B
Why oh why does K3B like to crash midway through burning an audio CD? It will burn data CD's all day long, with no problems. But, it will either crash at 50%, or just as it is beginnng to encode the final track. It has done this down the line from 9.2, through cooker and now CE. I'm fully updated, and everything is set as it should be. I watched the buffer status like a hawk during the latest burn, and not once did it drop below 96%, so I'm doubting it's an under run. Crashing on the last track I can live with, as I always add an extra track to what I want. But the 50% gets me steamed.. It wastes a CD! Any ideas? JRH -- Sent using Kmail, on Mandrake Linux 10 Community Exposing Microsoft products directly to the internet, is a bit like painting a large bullseye on your butt, and bending over, naked, in a San Francisco steam room. Except, Microsoft isnt nearly as safe Registered Linux User #340061 ICQ: #86015236 Yahoo!: v6vitanic 18:58:08 up 3:42, 1 user, load average: 0.39, 0.27, 0.43 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] K3B
On Friday 30 Apr 2004 19:25, Inhabitant of Zion wrote: Have you tried burning at a slower speed? I've never had it fry an audio CD on my cheap and cheerful Iomega. John, I have tried knocking it down to 2x manually, and it still does it... Maybe it's something to do with my hardware config that it doesent like. JRH -- Sent using Kmail, on Mandrake Linux 10 Community Exposing Microsoft products directly to the internet, is a bit like painting a large bullseye on your butt, and bending over, naked, in a San Francisco steam room. Except, Microsoft isnt nearly as safe Registered Linux User #340061 ICQ: #86015236 Yahoo!: v6vitanic 19:56:01 up 12 min, 1 user, load average: 0.50, 1.08, 0.89 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] K3B
On Friday 30 Apr 2004 19:40, Todd Slater wrote: Far as I can tell, K3B has a k in it. Anything with a k in the name calls 50,000 other processes and leaves them running when its finished, copies your .wav's to a tmp folder, and doesn't delete them if it crashes in the middle of a burn Aaah.. That explains why it has just gone monumentally mammaries skyward during a burn... I was trying to burn 22 tracks. each one of them sung by Kevin Bloody Wilson.. Lots of K's there! The only way I could get the old girl back, was to hit the missus button (reset!). I'm gonna give XCDRoast a whack and see what happens JRH -- Sent using Kmail, on Mandrake Linux 10 Community Exposing Microsoft products directly to the internet, is a bit like painting a large bullseye on your butt, and bending over, naked, in a San Francisco steam room. Except, Microsoft isnt nearly as safe Registered Linux User #340061 ICQ: #86015236 Yahoo!: v6vitanic 19:59:39 up 16 min, 1 user, load average: 0.44, 0.78, 0.80 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] K3B
On Friday 30 Apr 2004 22:14, Ian wrote: Right, I'm gonna give it another try.. This Time, I have removed the letter K from every filename in the list I want to burn... (and for those of you that know Kevin Bloody Wilson, he has a hell of a lot of K's in his song titles!) :-) It took a bit of doing, but lets see what happens! JRH Well, it worked alright this time.. after I applied the no K ruling! I also knocked the burn speed down to 10x, seeing as I have a 24x writer, I decided to go sfae and go one lower than 12. took it's time though, only got an average of 4.01x... But it didnt trip up this time! JRH -- Sent using Kmail, on Mandrake Linux 10 Community Exposing Microsoft products directly to the internet, is a bit like painting a large bullseye on your butt, and bending over, naked, in a San Francisco steam room. Except, Microsoft isnt nearly as safe Registered Linux User #340061 ICQ: #86015236 Yahoo!: v6vitanic 22:24:57 up 1:17, 1 user, load average: 0.71, 1.18, 1.46 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] Apollon Plugins
Hi all, Some nice gent on here sent me the GnuTella plugin. However... I try to install it, or configure it, using the ./configure command as root. However, I now have this problem: configure: error: Library requirements (libgift = 0.11.4 libgift 0.12.0) not met; consider adjusting the PKG_CONFIG_PATH environment variable if your libraries are in a nonstandard prefix so pkg-config can find them. [EMAIL PROTECTED] gift-gnutella-0.0.9.2]# Now, I cant find GiFT 0.12 anywhere on the web. Maybe I have to modify something to get it to see gift 0.11? I'm a bit confused here! JRH -- Sent using Kmail, on Mandrake Linux 10 Community Exposing Microsoft products directly to the internet, is a bit like painting a large bullseye on your butt, and bending over, naked, in a San Francisco steam room. Except, Microsoft isnt nearly as safe Registered Linux User #340061 ICQ: #86015236 Yahoo!: v6vitanic 18:05:08 up 23 min, 1 user, load average: 0.19, 0.39, 0.48 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] Kfind Crashing....
Hello again.. Ever since I have had 10.0, be it Cooker or CE, I have major problems with Kfind. Enter your search parameters, and click find, and it just locks up. The only way to solve it, is to xkill it. Any Ideas? I'm fully updated, and have run the updatedb command.. JRH -- Sent using Kmail, on Mandrake Linux 10 Community Exposing Microsoft products directly to the internet, is a bit like painting a large bullseye on your butt, and bending over, naked, in a San Francisco steam room. Except, Microsoft isnt nearly as safe Registered Linux User #340061 ICQ: #86015236 Yahoo!: v6vitanic 18:18:46 up 36 min, 1 user, load average: 1.42, 0.90, 0.61 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] Apollon Plugins
Hi Y'all! I finally managed to get Apollon up and running, after many failed attempts with the so called all in one installer from the SF site. I managed to get it going with the RPM'S from PLF. However, there are only 2 plugins on PLF, being openFT and FastTrack. I'd like GNUTella too, as an extra. Anyone have an RPM, or anything else for that matter that they can send throug to me? TIA, JRH -- Sent using Kmail, on Mandrake Linux 10 Community Exposing Microsoft products directly to the internet, is a bit like painting a large bullseye on your butt, and bending over, naked, in a San Francisco steam room. Except, Microsoft isnt nearly as safe Registered Linux User #340061 ICQ: #86015236 Yahoo!: v6vitanic 17:54:47 up 3:16, 1 user, load average: 0.52, 0.40, 0.58 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Windows LiLo
On Tuesday 27 Apr 2004 09:43, Stephen Kuhn wrote: Er...I think we've been through this already (day late and a dollar short) NYAH! I rolled over and took it like a Man in the end I reinstalled, and whilst I was at it, set aside 3GB as FAT32, and reloaded '98 on my main drive. It's there, as it worked before I reinstalled LiLo. Trouble is, it aint showing up on LiLo again! And LiLo is on my MBR, and Windows is first on the drive. Oh well, I hopefully will be able to get it going :-) , It's not as though there has been no posts on the subject, so a trawl through the archives may bring up some info! JRH -- Sent using Kmail, on Mandrake Linux 10 Community Exposing Microsoft products directly to the internet, is a bit like painting a large bullseye on your butt, and bending over, naked, in a San Francisco steam room. Except, Microsoft isnt nearly as safe Registered Linux User #340061 ICQ: #86015236 Yahoo!: v6vitanic 16:55:03 up 11 min, 1 user, load average: 0.97, 1.33, 0.91 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Windows LiLo
On Tuesday 27 Apr 2004 19:51, Stephen Kuhn wrote: So now you should be able to point lilo to the /dev/hda1 and boot - have you tried that now? Not yet. havent had chance! Just been setting up a Lexmark (spit) printer on my neighbours Windows (spit) computer. Once I have had a coffee and recovered from the stress of the situation, I will have a go! :-) JRH -- Sent using Kmail, on Mandrake Linux 10 Community Exposing Microsoft products directly to the internet, is a bit like painting a large bullseye on your butt, and bending over, naked, in a San Francisco steam room. Except, Microsoft isnt nearly as safe Registered Linux User #340061 ICQ: #86015236 Yahoo!: v6vitanic 19:57:23 up 3:13, 1 user, load average: 0.77, 0.38, 0.24 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] Windows LiLo
Hi all. Until a week ago, Windows used to share my HDD alongside Linux. Then, last weekend, MS-DOS decided it was going to ruin my Linux install (with a little help from me inadvertently I guess!). I have tried to survive without a Windows partition, but In reality, I cant. I have loaded up 98 onto an old 2GB I have lying around, and have installed it in the box, as a slave drive. Now the fun bit. DiskDrake is seeing it, and calling it /dev/hdd1. When I set LiLo to boot from this, it doesent happen. Probably because the drive isnt mounted at this point?? Any Ideas how I can configure the boot loader to pick it up, and boot into Windows from this drive? I flatly refuse to let Linux and Windows co-exist on the same drive anymore!! (if I could find Linux versions of the software I got, I would forget it totally!). JRH -- Sent using Kmail, on Mandrake Linux 10 Community Exposing Microsoft products directly to the internet, is a bit like painting a large bullseye on your butt, and bending over, naked, in a San Francisco steam room. Except, Microsoft isnt nearly as safe Registered Linux User #340061 ICQ: #86015236 Yahoo!: v6vitanic 12:01:27 up 4 min, 1 user, load average: 2.04, 1.35, 0.57 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Windows LiLo
On Sunday 25 Apr 2004 12:28, Stephen Kuhn wrote: JRH After you edited the /etc/lilo.conf - did you re-run lilo? Ahh hold up Stephen. I used the GUI tool to alter things. looks like it hasnt saved it! I've noticed it has a habit of doing stuff like that, for example, when I copy my ADSL modem firmware across in drakconnect, it will copy from the floppy, but wont actually save it to the relevant folder. you have to do it manually! That looks like what has happened here... oh well, best VI it then! JRH -- Sent using Kmail, on Mandrake Linux 10 Community Exposing Microsoft products directly to the internet, is a bit like painting a large bullseye on your butt, and bending over, naked, in a San Francisco steam room. Except, Microsoft isnt nearly as safe Registered Linux User #340061 ICQ: #86015236 Yahoo!: v6vitanic 12:44:03 up 46 min, 1 user, load average: 0.69, 0.86, 1.23 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] Windows and LiLo
Stephen, Did as you suggested, and still no joy! I select windows at the lilo screen, and it just hangs there now have to use the reset switch to get it back again. I have pasted my lilo.conf file contents below. Doubtless to say, I'm doing something wrong here... but what?? :-) Feel free to have a look, and make any mods as you see fot, if you think it would help me! JRH # File generated by DrakX/drakboot # WARNING: do not forget to run lilo after modifying this file boot=/dev/hda default=linux prompt nowarn timeout=100 message=/boot/message menu-scheme=wb:bw:wb:bw disk=/dev/hdd bios=0x81 image=/boot/vmlinuz label=linux root=/dev/hda1 initrd=/boot/initrd.img append=devfs=mount acpi=ht resume=/dev/hda5 read-only other=/dev/fd0 label=floppy unsafe image=/boot/vmlinuz label=failsafe root=/dev/hda1 initrd=/boot/initrd.img append=failsafe acpi=ht resume=/dev/hda5 devfs=nomount read-only image=/dev/hdd label=windows root=/dev/hdd -- Sent using Kmail, on Mandrake Linux 10 Community Exposing Microsoft products directly to the internet, is a bit like painting a large bullseye on your butt, and bending over, naked, in a San Francisco steam room. Except, Microsoft isnt nearly as safe Registered Linux User #340061 ICQ: #86015236 Yahoo!: v6vitanic 13:18:38 up 5 min, 1 user, load average: 1.09, 1.11, 0.52 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] 10 official.....
I see from the mandrake site, that 10 Official is available for download Although I cant see any ISO Images available.. are there images yet? or is it too new? JRH -- Sent using Kmail, on Mandrake Linux 10 Community Exposing Microsoft products directly to the internet, is a bit like painting a large bullseye on your butt, and bending over, naked, in a San Francisco steam room. Except, Microsoft isnt nearly as safe Registered Linux User #340061 ICQ: #86015236 Yahoo!: v6vitanic 20:09:15 up 3:35, 1 user, load average: 0.95, 0.83, 0.66 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] Shutdown/Reboot
I have a problem... If I use the Shutdown/Reboot GUI in either KDE or Gnome, the screen goes black, and the computer just hangs, and does not shut down. Turn it on again, and the HDD has to be checked before it boots up. However, Open up a terminal, type poweroff or reboot, and things happen as they should. I havent got a problem with this method, but my PC doesnt have a Windows partition, and is shared by other members of my family, and every time one of them has used it, It checks the file system, as they have been bought up on Windows, and keep forgetting the terminal method.. Any Ideas how I can fix this problem so it works as it should? JRH -- Sent using Kmail, on Mandrake Linux 10 Community Exposing Microsoft products directly to the internet, is a bit like painting a large bullseye on your butt, and bending over, naked, in a San Francisco steam room. Except, Microsoft isnt nearly as safe Registered Linux User #340061 ICQ: #86015236 Yahoo!: v6vitanic 18:02:29 up 33 min, 1 user, load average: 0.60, 0.71, 0.64 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] Knotify and Souncard issue......
An interesting one this I finally found the route to a stable(ish) 10 community, buy installing 9.2 and upgrading, as opposed to a clean install of 10. I've always had some driver issues with the soundcard (C Media CM8738), but nothing that was not easily sorted. Until today. Boot up, and you get the nice little KDE tune as KDE starts. Play a few MP3's with XMMS, and you get to hear music. Until after a while. Then, try to use the soundcard, and the error message pops up, saying that the soundcard is either not configured properly, or another program is blocking the soundcard. A quick look at ksysguard process table, revealed 7 instances of knotify running. Killed them all, and the sound is back again. Any ideas how to to either disable knotify, or configure it so that when it has notified, it exits? as for some reason it cant be killing itself, and thus is hogging the soundcard. Thanks, JRH -- Sent using Kmail, on Mandrake Linux 10 Community Exposing Microsoft products directly to the internet, is a bit like painting a large bullseye on your butt, and bending over, naked, in a San Francisco steam room. Except, Microsoft isnt nearly as safe Registered Linux User #340061 ICQ: #86015236 Yahoo!: v6vitanic 17:07:51 up 2:12, 1 user, load average: 0.60, 0.27, 0.29 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] Knotify and Soundcards......
An interesting one this I finally found the route to a stable(ish) 10 community, buy installing 9.2 and upgrading, as opposed to a clean install of 10. I've always had some driver issues with the soundcard (C Media CM8738), but nothing that was not easily sorted. Until today. Boot up, and you get the nice little KDE tune as KDE starts. Play a few MP3's with XMMS, and you get to hear music. Until after a while. Then, try to use the soundcard, and the error message pops up, saying that the soundcard is either not configured properly, or another program is blocking the soundcard. A quick look at ksysguard process table, revealed 7 instances of knotify running. Killed them all, and the sound is back again. Any ideas how to to either disable knotify, or configure it so that when it has notified, it exits? as for some reason it cant be killing itself, and thus is hogging the soundcard. Thanks, JRH -- Sent using Kmail, on Mandrake Linux 10 Community Exposing Microsoft products directly to the internet, is a bit like painting a large bullseye on your butt, and bending over, naked, in a San Francisco steam room. Except, Microsoft isnt nearly as safe Registered Linux User #340061 ICQ: #86015236 Yahoo!: v6vitanic 18:30:32 up 3:34, 1 user, load average: 0.30, 0.23, 0.24 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] Update Mirrors......
I have finally managed to get it sorted!! My PC must have been having a Microsoft Day yesterday, whereby it just wouldn't play ball whatever I tried. It does that now and again. I came home from work, booted up, and tried again. Success!!! I now have over 300MB's worth of updates coming down. Many thanks to all of you that have offered help with the problem. I dont know what caused it, I did the same today as I did yesterday, and it has worked. Time to build a new PC methinks :-) Thanks all, JRH Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] Updated, now another problem....
Bit of a funny one this. KDE appears to have gone monumentally belly up! All letters in Kmail and in the KDE notification windows, appear to be double spaced now!! I have a screenshot available, as it will tell a thousand times more than I will ever be able to describe in writing! I have installed ALL available updates to MDK10 Community. Any Ideas? if you want to see the screenshot, mail me off list. Ta, JRH Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] Updates.....
so what is actually wrong with the update mirrors then? I managed to pull some stuff down from the czech site yesterday, but at very slow speed. Now, not one of them will work. Whats up? maintenance? or just sheer overload of people trying to improve 10 community? (I have just reinstalled, and it's playing up something rotten. Last time, I had to download 233MB of bugfixes!). It's getting frustrating! :-) JRH Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] Update Mirrors
so what is actually wrong with the update mirrors then? I managed to pull some stuff down from the czech site yesterday, but at very slow speed. Now, not one of them will work. Whats up? maintenance? or just sheer overload of people trying to improve 10 community? (I have just reinstalled, and it's playing up something rotten. Last time, I had to download 233MB of bugfixes!). It's getting frustrating! :-) JRH Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Update Mirrors
On Monday 19 Apr 2004 21:34, Kaj Haulrich wrote: Congatulations ! - Now, the easy way to update is to go to system -- Configuration--Packaging--Mandrake Update. Nope.. It's still brining up the list of non operative mirrors from the mandrakesoft website. Let it do what it's gotta do, and wait for rpmdrake to open up, and it tells me the list of updates is empty. Look in software media manager, and everything is as it should be, what with the Strasbourg URL etc. It's beyond me.. or maybe I am not getting something here! JRH Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Update Mirrors
On Monday 19 Apr 2004 21:50, Kaj Haulrich wrote: Hmm... Maybe you already are uptodate ? I shouldnt be, as I have only just re-installed after Windows quite successfully demolished my Linux install (dont ask!). Whatever, it's gotten me beat well and truly. It's been a long day, I'm tired, and I have overdosed on Nicotine and Caffeine tonight, trying to sort this out, and I must admit defeat. I'm off to bed, ready to refresh myself for round 2 tomorrow :-) Thanks for the help, JRH Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] Update sites.....
I know the update mirrors are shot to bits for some reason.. Somebody earlier posted an alternative URL, and mentioned something about using proxad. Trouble is, I have since deleted the email, and want to try the address... can anyone help with the URL? Many thanks, JRH --- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] MDk10CE, KDE 3.2 and no sound
On Monday 22 Mar 2004 09:36, Sweeney, Stephen wrote: Hear Hear Stephen! I'm having exactly the same problem! amongst others.. at the moment, 9.2 looks an increasingly better option :-) JRH (sorry if this comes out a bit long, but I'd like to make sure that I've explained everything). On the weekend I installed Mandrake 10 (install, not update). Install went fine. I then booted into KDE 3.2. It hung leaving the Mandrake wallpaper in the background. I tried again, this time I got a warning about Knotify not starting and asking me if I wanted to disable it. I did and it still hung. I then went into IceWM, fired up Kcontrol and turned off the sound in KDE (can't remember how I came to this conclusion). So now KDE loads. That's good. The trouble is that there are a number of apps that now will not support sound. I have tried setting KDE to use OSS and Threaded OSS and, although it will still load fine, I still can't get sound from the apps I want to use. In particular I'm having problems with, 1) XMMS - This one is strange. With ALSA it will not play. With OSS it will continually loop the first 1 second or so of the song until I hit stop. 2) Mplayer - Will play most movie files fine, but if you exit half way through the sound will loop around for around 5 seconds before stopping. 3) SDL game (not tried others) - There is no sound whatsoever. I tried recompiling the projects I'm working on and they simply can't get access to the sound. I know my hardware is compatible (Sony VIAO laptop) as I have been using MDK9 on it for over a year. Anyone got any suggestions, fixes, etc? It's very frustrating have all the benefits of the new KDE and general speed of everything but with such a let down in the sound department. Cheers, Steve :| --- --- This message is intended only for the personal and confidential use of the designated recipient(s) named above. If you are not the intended recipient of this message you are hereby notified that any review, dissemination, distribution or copying of this message is strictly prohibited. This communication is for information purposes only and should not be regarded as an offer to sell or as a solicitation of an offer to buy any financial product, an official confirmation of any transaction, or as an official statement of Lehman Brothers. Email transmission cannot be guaranteed to be secure or error-free. Therefore, we do not represent that this information is complete or accurate and it should not be relied upon as such. All information is subject to change without notice. -- Sent using Kmail, on Mandrake Linux 10. Linux - It's not Windows! 10:12:31 up 46 min, 0 users, load average: 1.25, 1.16, 1.24 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] Mouse problems
Hi All, I have a problem Every now and then, my mouse pointer will go totally mental, flying round the screen, opening up applications, minimizing windows, and generally doing it's own thing. Is this a problem with Linux or a hardware issue? I have a windows partition, and not once have I had the problem whilst running in windows. Any Ideas? JRH -- Sent using Kmail, on Mandrake Linux 10. Linux - It's not Windows! 11:15:44 up 1:49, 0 users, load average: 1.03, 0.75, 0.59 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Mouse problems
On Mon, 22 Mar 2004 06:48:30 -0500 Lee Wiggers [EMAIL PROTECTED] wrote: I plugged the offender back in to the box it went crazy on and, sure enough, it was unusable. Go figure. Lee Hmmm.. It could well be my rodent then. I bought it from our local Sunday market, for the equivalent of $4.00, which in the UK, is peanuts. I've had a good bit of service out of it till recently.. So it looks like it's due for replacement! Many Thanks, JRH -- Sent using Kmail, on Mandrake Linux 9.2. Software is like sex-It's better when it's free! 14:53:55 up 46 min, 0 users, load average: 0.07, 0.12, 0.38 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] MDK 10 and Drakconnect
Hi All, I'm currently downloading Mandrake 10. I downloaded and Installed Mandrake 10 RC1 a while back, and had some issues with Drakconnect, and my USB ADSL modem. The problem I had, was that unlike Mandrake 9.2, the auto detection wizard just wouldnt set the modem up properly. For example, the wizard would bring up a list, asking me to choose my ADSL provider. There was only 2 UK providers on the list, not one of them being my provider!. This, coupled with other problems, made for a non working internet connection, and it was uninstalled, and I went back to 9.2. Does anybody here have any experience of the Alcatel Speedtouch 330 USB ADSL modem and Mandrake 10?. Can someone offer a step by step guide to installation and config? (I have the modem firmware code, so dont tell me I havent installed that!) Many Thanks, James Hill Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] MDK 10 and Drakconnect
Lee, I have since upgraded from 9.2 to 10, and it shouldnt have really changed things much. However, I have my connection set to start at boot, both green lights began to flash on my modem, (as is normal), and then the ADSL light went yellow, and that was it, a failure message. I'm going to try setting it up with the Speedtouch package from the 9.2 Distro. The modem firmware code is the same as I have always used. Like you said, 9.2 is now history on this box. so if I cant get things to go my way, I'll reinstall 9.2, and let a Linux guru buddy of mine have a play with it at a later date. James Hill - Original Message - From: Lee Wiggers [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Sunday, March 21, 2004 12:26 PM Subject: Re: [newbie] MDK 10 and Drakconnect On Sun, 21 Mar 2004 10:44:36 + JRH [EMAIL PROTECTED] wrote: Hi All, I'm currently downloading Mandrake 10. I downloaded and Installed Mandrake 10 RC1 a while back, and had some issues with Drakconnect, and my USB ADSL modem. The problem I had, was that unlike Mandrake 9.2, the auto detection wizard just wouldnt set the modem up properly. For example, the wizard would bring up a list, asking me to choose my ADSL provider. There was only 2 UK providers on the list, not one of them being my provider!. This, coupled with other problems, made for a non working internet connection, and it was uninstalled, and I went back to 9.2. Does anybody here have any experience of the Alcatel Speedtouch 330 USB ADSL modem and Mandrake 10?. Can someone offer a step by step guide to installation and config? (I have the modem firmware code, so dont tell me I havent installed that!) Many Thanks, James Hill Before you leave 9.2 get a list of your drivers that are working. You can choose them manually if the automagic install picks the wrong ones. Happened to me when it was already too late (9.2 was history on that box) I had to find someone with the same setup. He listed his config and I was running in minutes. Lee Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Re: Some positive reviews for 10.0 Community
For RealPlayer and Acrobat, I suggest you take a look at the vendors websites. I have just been to adobe.com for acrobat for Winsucks, and there was a whole list I had to choose from. Linux, MAC, FreeBSD etc... as for realplayer, I'm sure I got the RPM for rp8 from the real site. If youre struggling, I have the RPM here, so I could always send it to you. On 9.2, Acrobat seems to be integrated into Konqueror, so thats what I use for .pdf work. HTH, JRH - Original Message - From: Kaj Haulrich [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Sunday, March 21, 2004 1:22 PM Subject: Re: [newbie] Re: Some positive reviews for 10.0 Community On Sunday 21 March 2004 09:29, Anne Wilson wrote: snip That's my feeling, too. As for comparing releases, it's just about impossible. What is brilliant on one machine is a total disaster on others. 8.2 is lauded by most, but was a disaster for me. 9.0 worked, more or less and 9.1 was brilliant - I'm reluctant to change this box. There are no easy answers, but it's certainly an issue that has to be considered when thinking of giving linux to non-techy users. /snip Like you Anne, I was reluctant to install 10.0 what with having spent weeks to get 9.2 running well. But surprise : yesterday I shuffled the CD2 into the cupholder and lo and behold, one hour later 10.0 CE runs like a charm. Not only that, it runs about 30 % faster, especially KDE. And, for the first time, I took the option of installing the updates right away, during the initial install. Everything worked well. Only minor glitches (so far) : Now my printer (HP 3820) performs some (noisy) drills during the boot process - but after a while it works. I had a /data partition (hda4) on 9.2, but 10.0 insisted to mount it as /mnt/windows (it is a FAT32 partition), but I don't like to see that word on my otherwise clean machine. So I had to edit fstab in order to get things straight. I'm a little confused about the Mandrake Update. Seems that the normal update repositories are gone and all updates are on the same directory, just with higher version numbers. Haven't browsed that many mirrors, though. Although I'm a Club Silver Member, I haven't been able to get my hands on Acrobat Reader or RealPlayer, but I can live with that. All in all : what a nice experience ! Kaj Haulrich. -- * Sent from a 100 % Microsoft-free computer * * running Linux kernel 2.6.3 on Mandrake 10.0 * Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Fw: [newbie] File Sharing
snipLots of them: Apollon, MlDonkey, LimeWire, etc/snip I use LimeWire, which not being as good as Kazaa, is more than adequate. If you have hours to spare in order to wait for a download, then Overnet command line client is worth looking at too. I have major problems with Apollon, It just wont install properly, using the so called all in one installer. It will screw up halfway during installation, owing to a dependant library or application not being installed, but it wont actually give you too many clues as to what you need to install to rectify the situation! I finally got it to install, and then it wouldnt run.. it hadnt even installed giFT! I asked on the forums, but got the usual silence/unhelpful answers. So, it's binned for the time being. A friend is in the process of rolling me a version, from the source code. JRH - Original Message - From: Josenildo Marques [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Sunday, March 21, 2004 3:29 PM Subject: Re: [newbie] File Sharing On Sun, 2004-03-21 at 18:03, Steve Turner wrote: Any file sharing software that works with Linux? Lots of them: Apollon, MlDonkey, LimeWire, etc. __ -- josenildo marques icq #289971493 homepage http://cyb.ezdir.net registered linux user #341648 * Talking much about oneself can also be a means to conceal oneself. Friedrich Nietzsche Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: Fw: [newbie] File Sharing
snipRPMs for Apollon are in plf for 9.2 and 10.0 together with gift-fasttrack (Kazaa) and gift-openft (Native giFT) plugins If you define plf as a urpmi source, then all the dependencies will be installed at once. You may find the fasttrack (Kazaa) plugin is not recognised until you use Advanced settings to point to the location of the fasttrack plugin/snip Many thanks for that Derek, Just as soon as I can get out of Microshaft Winsucks, I will get into Mandrake and have a play. Cheers! JRH - Original Message - From: Derek Jennings [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Sunday, March 21, 2004 4:39 PM Subject: Re: Fw: [newbie] File Sharing On Sunday 21 Mar 2004 15:56, JRH wrote: snipLots of them: Apollon, MlDonkey, LimeWire, etc/snip I use LimeWire, which not being as good as Kazaa, is more than adequate. If you have hours to spare in order to wait for a download, then Overnet command line client is worth looking at too. I have major problems with Apollon, It just wont install properly, using the so called all in one installer. It will screw up halfway during installation, owing to a dependant library or application not being installed, but it wont actually give you too many clues as to what you need to install to rectify the situation! I finally got it to install, and then it wouldnt run.. it hadnt even installed giFT! I asked on the forums, but got the usual silence/unhelpful answers. So, it's binned for the time being. A friend is in the process of rolling me a version, from the source code. JRH - Original Message - From: Josenildo Marques [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Sunday, March 21, 2004 3:29 PM Subject: Re: [newbie] File Sharing On Sun, 2004-03-21 at 18:03, Steve Turner wrote: Any file sharing software that works with Linux? Lots of them: Apollon, MlDonkey, LimeWire, etc. __ -- josenildo marques RPMs for Apollon are in plf for 9.2 and 10.0 together with gift-fasttrack (Kazaa) and gift-openft (Native giFT) plugins If you define plf as a urpmi source, then all the dependencies will be installed at once. You may find the fasttrack (Kazaa) plugin is not recognised until you use Advanced settings to point to the location of the fasttrack plugin. Read the config file to find which firewall ports you should open. derek -- www.jennings.homelinux.net http://twiki.mdklinuxfaq.org Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] MDK 10? Hmm.....
just managed to finally get 10 Community up and running, and I have a question: On 9.2, the login screen gave me the opportunity to manually enter my username. 10 does not appear to give me that option. I used to be able to log into KDE as root, and do things that way, to save time using command line stuff. I cant do that now. Is there a way to change the login screen at all, so that I can do this?. I had it once with 9.2, but I cant for the life of me remember how to do it! I'm getting a bit frustrated now, I need to change permissions on various things, and I dont know how to do it in shell so I need a GUI! JRH Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] X Includer
On Sun, 22 Feb 2004 17:36:45 +0200 robin [EMAIL PROTECTED] wrote: libxfree86-devel Thank you Brave Sir Robin, I'll have a look right now! JRH -- Sent using Sylpheed, on Mandrake Linux 9.2. Blessed are the geek, for they shall inherit the source code Registered Linux User #340061 AMD K6-2/550Mhz, 392MB, 123GB ICQ: #86015236 Yahoo!: v6vitanic 15:37:23 up 6:28, 1 user, load average: 0.00, 0.38, 0.61 -- Sent using Sylpheed, on Mandrake Linux 9.2. Blessed are the geek, for they shall inherit the source code Registered Linux User #340061 AMD K6-2/550Mhz, 392MB, 123GB ICQ: #86015236 Yahoo!: v6vitanic 16:16:26 up 7:07, 1 user, load average: 1.62, 1.31, 1.11 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com