Re: [newbie] How do you get rid of enigmail from thunderbird?
Jack ([EMAIL PROTECTED]) wrote: Rick Kunath wrote: On Monday 15 November 2004 07:22 pm, Jack wrote: I don't use it and the damn thing pops up everytime I open an email in Thunderbird. Does anyone know how to get rid of it? - Jack Download the enigmail and enigmime files and re-install them as root (on top of the existing files). Shut down and restart Thunderbird. Open extensions and uninstall these both (again as root). Shut down Thunderbird and re launch it and enigmail should be gone. For some reason you can't uninstall the extensions even as root until they are re-installed as root. It appears they were installed as root when the rpm was built. Thanks Rick, mostly this worked... I was able to get rid of the extension as a normal user. I did not have to log in as root. (When I did try to do this, Thunderbird started the new account wizard!) This could be because I installed Thunderbird under rpmdrake, and did not use the firefox/thunderbird self-installer. - Jack Hi Jack, I have a request, could you please stop sending html mail to this list? It really borks qouting in mutt. Thx -- RickS +--+ May your every expression be regular. MandrakeLinux 10.0 OE - 2.6.3-19mdk-i686-up-4GB +--+ Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] TWiki - Plea for help!
Paul ([EMAIL PROTECTED]) wrote: Op Sun, 14 Nov 2004 08:13:59 + schreef Anne Wilson: Cracked and destroyed, that is bad news! Why do people do that!! G. I agree Anne That's good news. As soon as we have the older version back up I'll post a message, then you can re-enter the article if it has gone. At the moment there's no way of knowing just what we have lost. Hopefully we'll get back 80% or more. I can still reproduce my article on setting up the Epson C44Plus in Mdk 9x and 10. Waiting for the call... Paul I seem to recall adding my printer PSC2175 and motherboard-gigabyte. -- RickS +--+ MandrakeLinux 10.0 OE - 2.6.3-19mdk-i686-up-4GB gpg --recv-keys --keyserver www.keyserver.net 0x24AABE61 +--+ Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Lexmark Z54 Printer Driver?
Sevatio ([EMAIL PROTECTED]) wrote: I'm tying to setup a Lexmark z54 printer. There's no choice for a z54 printer. Which alternate driver have any of you tried out to be successful? Thanks, Sevatio A great resource for linux printing is: http://www.linuxprinting.org/ I found this reference for your printer at http://www.linuxprinting.org/lexmark-faq.html#s_14 Section 14: Lexmark Z54 14.1 Which driver do I use? The Z43 driver has been reported working. HTH -- RickS +--+ May your every expression be regular. MandrakeLinux 10.0 OE - 2.6.3-19mdk-i686-up-4GB gpg --recv-keys --keyserver www.keyserver.net 0x24AABE61 +--+ Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] How to Capture Text Mode Output?
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Wed, 6 Oct 2004 08:01:10 -0400 (EDT) David B. Carter [EMAIL PROTECTED] wrote: I don't know if my subject line made any sense, but what I'm trying to do is this: I recently switched from booting in runlevel 5 to runlevel 3. I'm using Xtart to give me a choice of window managers. Since I started doing that, I am noticing several errors and warnings fly by in text mode before the screen switches into graphics mode and launches my window manager of choice. When I log out of my window manager session, some of the info(plus additional output generated during my session) is visible on the screen, but much of it has already scrolled off the top. I want to know how I can capture all that info so that I can look at it after my session is over. I tried using the pause key to pause before the screen switches to graphics mode, but no dice. So, is there a way that I can either page up and see the text mode output that has already scrolled up or redirect the output to a file or something like that? David, you could try: script (1) - make typescript of terminal session after you login, type: script ~/filename.error then start Xtart, and eventually exit your windowmanager of choice. back at command line, type CTRL-D or exit to stop the script program. then less ~/filename.error $ man script for more . I tested it and it worked for me. HTH RickS +--+ May your every expression be regular. MandrakeLinux 10.0 official - 2.6.3-16mdk-i686-up-4GB gpg --recv-keys --keyserver www.keyserver.net 0x24AABE61 +--+ -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.4 (GNU/Linux) iD8DBQFBZMHhJo/ckCSqvmERAnceAJkBkQTd4X6XDFwzPLJFOax7zBYgwACZAcVB ilPuw7ltIKyHs/LS+TVJvXA= =/CNb -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] How to Capture Text Mode Output?
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Thu, 7 Oct 2004 00:11:13 -0400 RickS [EMAIL PROTECTED] wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Wed, 6 Oct 2004 08:01:10 -0400 (EDT) David B. Carter [EMAIL PROTECTED] wrote: snip David, you could try: script (1) - make typescript of terminal session after you login, type: script ~/filename.error then start Xtart, and eventually exit your windowmanager of choice. back at command line, type CTRL-D or exit to stop the script program. then less ~/filename.error $ man script for more . I tested it and it worked for me. HTH David, actually it doesn't seem to work .. I had to add an to run it in the background and upon checking the file it contained only the login info for my user. Sorry RickS +--+ May your every expression be regular. MandrakeLinux 10.0 official - 2.6.3-16mdk-i686-up-4GB gpg --recv-keys --keyserver www.keyserver.net 0x24AABE61 +--+ -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.4 (GNU/Linux) iD8DBQFBZMhdJo/ckCSqvmERAgfYAJ9qRG0C5HEkoxl2v2WWby++rstfEACcCVnY Bofota8EZzGl14wJwEZxUto= =PqJ2 -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Aterm
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Thu, 5 Aug 2004 12:09:33 +0200 Marc Hultquist [EMAIL PROTECTED] wrote: Does anyone know atem really well ? I am basically trying to do a few things with it, and then obviously when I have figured it out, I will add it into my fluxbox menu as a launcher. I am trying to do the following: 1. Set the Background to be transparent through to my desktop background. (Like you can do with gnome-terminal.) 2. Set the font. 3. Set the borders to be a certain size. Now I see the command as being as follows: aterm +tr +trsb -sh 80 -fade 80 -tint blue try this Mark .. /* on one line */ aterm -g 90x42 -fg white -tr -bw 0 -fade 69 -cr yellow -fn 8x13 - -txttype inverted -tinttype true +sb -T MyBox I think -tinttype true is needed for transparency - -g length X height should get you the gui size from the man page : -tinttype type Allows you to specify logical function to be used when tinting transparent background. That will cause aterm to logically combine text with background pixels. NOTE: If shading option is used, or background image is specifyed - true type will always be used. That works with bpth transparent background and back- ground image. Possible values are : Fast tinting options : and, andReverse, andInverted, xor, or, nor, invert, equiv, invert, orReverse, orInverted, nand, Slow tinting: true - will do true tinting - that means that background pixel´s RGB components will be decreased proportionaly to the RGB components of specified tinting color; resource tintingType. RickS +--+ MandrakeLinux 10.0 official - 2.6.3-15mdk-i686-up-4GB gpg --recv-keys --keyserver www.keyserver.net 0x24AABE61 +--+ The truth you speak has no past and no future. It is, and that's all it needs to be. -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.4 (GNU/Linux) iD8DBQFBEwl4Jo/ckCSqvmERAhd7AJ4zVWqZRqkIpAOXc0SK0j3hPMY8eACgxFED fgUEzdRSI08JIRNONZy9OuI= =WcB1 -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Package list help.
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Sat, 31 Jul 2004 08:18:59 -0500 Hoyt Bailey [EMAIL PROTECTED] wrote: On Saturday 31 July 2004 07:37, Hoyt Bailey wrote: On Saturday 31 July 2004 05:28, Frank wrote: OK. A favour for a favour, ( I hope? ) # rpm -qa Thats the command, now what do I add to the end of it to successfully pipe it to a text file? Regards Frank snip rpm -qa (filename) | tee (file where you want the answer) Forgot something. rpm -qa | sort | tee (file where you want the answer). -- Regards; Hoyt Try this, It came from this list a year ago or so and I made it an alias alias lrpm='rpm -qa | sort /home/ricks/rpmlist-`date +%d%m%y_%I%M`.txt' it will add the date to the file list. HTH RickS +--+ MandrakeLinux 10.0 official - 2.6.3-15mdk-i686-up-4GB gpg --recv-keys --keyserver www.keyserver.net 0x24AABE61 +--+ You can't take it with you -- especially when crossing a state line. -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.4 (GNU/Linux) iD8DBQFBDQB8Jo/ckCSqvmERAn7LAKCOZmTb3U8IMQGxapgi0ZY8v4+LBwCeKGSp tS39Q2I/koEs7hKjVSeLQto= =5FMy -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Package list help.
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Sun, 1 Aug 2004 10:35:26 -0500 Tom Brinkman [EMAIL PROTECTED] wrote: On Sunday 01 August 2004 09:38 am, RickS wrote: Thanks! That's a much better solution than I posted Tom Brinkman Corpus Christi, Texas Proud to be an American Glad to help ... also I've been working on bash scripting, and also wrote this script from that alias I don't always know what all these packages actually are. So I added a sorted list of all the rpm info .. For any interested Here it is . #!/bin/bash ### # filename:rpminfo.sh # date:2004-07-26 # author: ricks ( [EMAIL PROTECTED] ) # generates list of installed rpms. Sort the results, # appending the date to a text file. # then lists info for same rpm list, to another file ### # *.txt is the list of rpms installed # *.list is the info for each of the rpms installed from list txt file### DATE=`date +%d%m%y_%I%M` FILE1=/home/ricks/backup/rpmlist-$DATE.txt FILE2=/home/ricks/backup/rpmlist-$DATE.list rpm -qa | sort $FILE1 xargs rpm -qi $FILE1 $FILE2 HTH too ... RickS +--+ MandrakeLinux 10.0 official - 2.6.3-15mdk-i686-up-4GB gpg --recv-keys --keyserver www.keyserver.net 0x24AABE61 +--+ I have often regretted my speech, never my silence. -- Publilius Syrus -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.4 (GNU/Linux) iD8DBQFBDTAJJo/ckCSqvmERAs9DAJ0V8XuGlThBSssMRpSF7Qzqz/8dKgCfXO+x jjl5ZZ3LmEBiFWHo416980E= =l/w6 -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] How does one print man pages.
On Thu, 29 Jul 2004 16:19:18 -0500 Hoyt Bailey [EMAIL PROTECTED] wrote: On Thursday 29 July 2004 14:17, Derek Jennings wrote: On Thursday 29 Jul 2004 19:18, Hoyt Bailey wrote: On Thursday 29 July 2004 13:02, [EMAIL PROTECTED] wrote: On 29 Jul 2004 at 12:56, Hoyt Bailey wrote: There has to be a better way to print man pages than to use copy/paste. Please give me a clue? -- Regards; Hoyt for the man page $ man -t | lpr or see http://www.schweikhardt.net/man_page_howto.html#q10 pm Thanks for the refrence. LPR isnt quite right yet. An easy way to print man pages is to enter #command_name in the URL line of konqueror, and then print from konq. derek I want to print the man page 'man sensors' entering sensors into the url line takes me to google. Otherwise printing from konqueror works fine.-- Regards; Hoyt try this Hoyt, man:sensors // in the URL line of konqueror, HTH RickS +--+ MandrakeLinux 10.0 official - 2.6.3-15mdk-i686-up-4GB gpg --recv-keys --keyserver www.keyserver.net 0x24AABE61 +--+ Don't abandon hope: your Tom Mix decoder ring arrives tomorrow. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Eterm command line question
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Mon, 28 Jun 2004 19:54:29 -0500 Chris [EMAIL PROTECTED] wrote: I had eterm setup the way I wanted it by setting the command line in $/.kde/share/applnk-mdk/Terminals and it worked great, however a bit ago I had a power hit from a t-storm, rebooted the machine and all my settings are gone. They seem to be saved but I guess not. Anyway to save these other than going into the menu setup and editing the command line there then redoing my link to the desktop? Hi Chris, I would create an alias in your .bashrc file as alias myEterm=''Eterm -g 120x28 -O -0 --shade 81 -x --buttonbar off - --scrollbar off' substitute any name for myEterm and any other settings you wanted, and all you have to remember is the alias name.. HTH RickS +--+ MandrakeLinux 10.0 official - 2.6.3-14mdk-i686-up-4GB gpg --recv-keys --keyserver www.keyserver.net 0x24AABE61 +--+ Waste not fresh tears over old griefs. -- Euripides -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.4 (GNU/Linux) iD8DBQFA4Mh1Jo/ckCSqvmERAmcQAJ0adXlPmo+ye6avFaht0onx4odV0QCfdj1O vpp352ixV4kW+xxc5t2LgdM= =q0/a -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] firefox 0.9 moved my cheese
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Sun, 27 Jun 2004 09:41:14 -0400 Todd Slater [EMAIL PROTECTED] wrote: The move to firefox 0.9 was a bad idea. I downloaded the .tar.gz from mozilla.org. Besides much of the UI and shortcuts being different, now my script to open links in a new tab if there's a running window is broken. In fact, I can't even get the -remote to work at all: it does not recognize that there is a running window at all. On the upside, I can just call firefox and get a new window without the complaints of the profile manager, but that kind of defeats the purpose(for me) of tab functionality. Anybody else have this problem and a solution? Hi Todd, do you mean something like this .. it was on the cooker list yesterday .. subject was : Re: [Cooker] -remote open of pages with Mozilla-Firefox 0.9 failure(SOLVED) mozilla-firefox -a firefox -remote 'openURL(%s,new-window)' (no space after openURL and no spaces in %s,new-window HTH RickS +--+ MandrakeLinux 10.0 official - 2.6.3-14mdk-i686-up-4GB gpg --recv-keys --keyserver www.keyserver.net 0x24AABE61 +--+ Don't stop to stomp ants when the elephants are stampeding. -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.4 (GNU/Linux) iD8DBQFA3t8DJo/ckCSqvmERAqAQAJ9pwhwfxlkm1DbS24CLpG181GPazwCgwlRB 3TmPA6S80RLh90GdaN6mRTY= =vARD -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] firefox 0.9 moved my cheese
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Sun, 27 Jun 2004 09:41:14 -0400 Todd Slater [EMAIL PROTECTED] wrote: The move to firefox 0.9 was a bad idea. I downloaded the .tar.gz from mozilla.org. Besides much of the UI and shortcuts being different, now my script to open links in a new tab if there's a running window is broken. In fact, I can't even get the -remote to work at all: it does not recognize that there is a running window at all. On the upside, I can just call firefox and get a new window without the complaints of the profile manager, but that kind of defeats the purpose(for me) of tab functionality. Anybody else have this problem and a solution? Sorry the last line was supposed to be: mozilla-firefox -a firefox -remote 'openURL(%s,new-window)' (no space after openURL and no spaces in %s,new-window I got auto-wrapped ... g RickS +--+ MandrakeLinux 10.0 official - 2.6.3-14mdk-i686-up-4GB gpg --recv-keys --keyserver www.keyserver.net 0x24AABE61 +--+ You can never tell which way the train went by looking at the tracks. -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.4 (GNU/Linux) iD8DBQFA3t91Jo/ckCSqvmERAi/sAKCHVqDnj2yZceWS3vrDaMJobhEodgCeOWeL QkAuQ0S3s4fA+TfDXJXdTiw= =pX/v -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Xorg+wineX doesnt work ?
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Fri, 25 Jun 2004 17:58:57 -0400 JoeHill [EMAIL PROTECTED] wrote: Why play those games through WineX when Linux clients are available? Hi Joe, I haven't installed the linux client for MOHAA, was testing wineX with xorg first. The quake2 GL and SDL version doesn't work for me. The mouse points up no matter what I do and it spins around in a circle. Even using the joystick doesn't fix it, same problem ?? Although, I haven't had enough time to diagnose the problem yet, Google or otherwise .. Thx RickS +--+ MandrakeLinux 10.0 official - 2.6.3-14mdk-i686-up-4GB gpg --recv-keys --keyserver www.keyserver.net 0x24AABE61 +--+ Living in the complex world of the future is somewhat like having bees live in your head. But, there they are. -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.4 (GNU/Linux) iD8DBQFA3KlrJo/ckCSqvmERAm/fAJ9Q5YxWr44eevQFCu3m4KyqPQDPzgCfd6Sq nTZOXMXM69WOQU8DMmVYGX0= =awI0 -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Xorg+wineX doesnt work ?
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Fri, 25 Jun 2004 17:58:57 -0400 JoeHill [EMAIL PROTECTED] wrote: Why play those games through WineX when Linux clients are available? BTW Joe, do you use the rpm from contrib or the versions from http://icculus.org/quake2/ ??? if so .. what version ? RickS +--+ MandrakeLinux 10.0 official - 2.6.3-14mdk-i686-up-4GB gpg --recv-keys --keyserver www.keyserver.net 0x24AABE61 +--+ A Scholar asked his Master, Master, would you advise me of a proper vocation? The Master replied, Some men can earn their keep with the power of their minds. Others must use thier strong backs, legs and hands. This is the same in nature as it is with man. Some animals acquire their food easily, such as rabbits, hogs and goats. Other animals must fiercely struggle for their sustenance, like beavers, moles and ants. So you see, the nature of the vocation must fit the individual. But I have no abilities, desires, or imagination, Master, the scholar sobbed. Queried the Master... Have you thought of becoming a salesperson? -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.4 (GNU/Linux) iD8DBQFA3K94Jo/ckCSqvmERAteTAKCRDaETBDxbOD5+67w7qmyJEQKMDACfTLtW a1Shp5MAdd0mLM82J510/xE= =4KNw -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Xorg+wineX doesnt work ?
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Fri, 25 Jun 2004 20:03:52 -0400 Charles A Edwards [EMAIL PROTECTED] wrote: On Fri, 25 Jun 2004 19:42:05 -0400 JoeHill wrote: The graphics, if you build the Quake2Max version, are *kick ass*. Loki's Quake2 is also kick ass unfortunately during game play it is usually my ass that ends up getting kicked. I understand the frustration Charles .. g RickS +--+ MandrakeLinux 10.0 official - 2.6.3-14mdk-i686-up-4GB gpg --recv-keys --keyserver www.keyserver.net 0x24AABE61 +--+ You will always find something in the last place you look. -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.4 (GNU/Linux) iD8DBQFA3PIqJo/ckCSqvmERAmeWAKCSh8+QMfnAPoc6BNM6+ZpmCkuNGQCfYxAD z2o/0TLXB2480T8XkzZms2I= =jIF7 -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Xorg+wineX doesnt work ?
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Fri, 25 Jun 2004 19:42:05 -0400 JoeHill [EMAIL PROTECTED] wrote: On Fri, 25 Jun 2004 19:04:24 -0400 RickS disseminated the following: Why play those games through WineX when Linux clients are available? BTW Joe, do you use the rpm from contrib or the versions from http://icculus.org/quake2/ ??? if so .. what version ? I built mine from the Icculus source, latest version was, IIRC, 0.15? From here: http://icculus.org/quake2/ The graphics, if you build the Quake2Max version, are *kick ass*. Well, for the record, the brand new version of wineX called Cadega 4.0-1 does not work with either MOHAA or xorg, or maybe even nvidia ,but I doubt that.. , so the game is playing but the video is wacked, scrambled .. ?? I will let the maintainers know. the older wineX 3.3.2-1 DOES WORK 8) So does wolfenstein and Never Winter Nights -- natively 8) MOHAA I had running under 9.2 and haven't gotten to installing the native version. I have to get the new installer .. IIRC it has definitely been updated. I didn't know about the quake2 mailing list .. we'll take a look.. thx Thx Joe, I have the source now and will give it a go tomorrow .. Cool !! IIRC .. joe is the headshot guru 8) RickS +--+ MandrakeLinux 10.0 official - 2.6.3-14mdk-i686-up-4GB gpg --recv-keys --keyserver www.keyserver.net 0x24AABE61 +--+ The truth is what is; what should be is a dirty lie. -- Lenny Bruce -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.4 (GNU/Linux) iD8DBQFA3POzJo/ckCSqvmERAsxdAJ9jBG6IBcU5YJjOkUU1qicKtmjMxACffn+p 3BIIxDk6WTceat+w/McJgbI= =QD3O -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Xorg+wineX doesnt work ?
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Fri, 25 Jun 2004 20:12:11 -0700 (PDT) karthik bala guru [EMAIL PROTECTED] wrote: I think the probelem is not with Xorg upgradation . but i did come across the same problem after having my kernel recompilation.kindly,show some more light Hi Karthik No if you mean, the quake2 mouse looking to the sky I mentioned, it was there with XFree before I did the xorg install .. But I am gonna look into the mailing list for quake2 and see if there are any answers .. Thx RickS +--+ MandrakeLinux 10.0 official - 2.6.3-14mdk-i686-up-4GB gpg --recv-keys --keyserver www.keyserver.net 0x24AABE61 +--+ Death is God's way of telling you not to be such a wise guy. -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.4 (GNU/Linux) iD8DBQFA3PXpJo/ckCSqvmERAqRvAJ9EFHOLERa7z3wdg3qwSltTudGNigCfUObx LAvSuqEdfuRubtmFrPBy0Sc= =+q/b -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Xorg rpms
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Sun, 13 Jun 2004 23:45:50 -0400 Charles A Edwards [EMAIL PROTECTED] wrote: [snip] | Xorg rpms now available for Mdk 10.0 |These rpms will replace exiting Xfree86 rpms and lib. | |They will work with both the fglrx and Nvidia drivers though I can | only provide first hand verification of the fglrx driver. | |Charles Thx Charles.. very much, I can verify they work with nvidia drivers after rebuilding the driver. 8) RickS +--+ MandrakeLinux 10.0 official - 2.6.3-13mdk-i686-up-4GB gpg --recv-keys --keyserver www.keyserver.net 0x24AABE61 +--+ Got a dictionary? I want to know the meaning of life. -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.4 (GNU/Linux) iD8DBQFA0jYdJo/ckCSqvmERAmRTAJ48R/hJfOSf2SzG7A7Exv01BXHtjgCfSvtf EI9Jy47MjeC6d1KFL+RyH0Q= =EF4P -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Re: nVidia drivers killed my Xfree?
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Fri, 11 Jun 2004 16:56:00 -0500 Eric Scott [EMAIL PROTECTED] wrote: |Hey, me again :-P, | I recently downloaded nVidia drivers from the nVidia website, installed|them with their kernal driver thingamaboper, and restarted my Mandrake 9.1|system to try and get my newly-downloaded Boson 0.7 (Isn't it technically|0.07? Ah well, typo on the mirror) to run smooth... and now X-free gives an|error. | I don't necessarily want help getting nVidia's drivers to work right with|my X-free (Wichi is, I believe, 4.3.0), but I'm novice to Linux... how do I|delete the driver packages from my system after they've been installed? I|used urpmi to put them in, as they were both rpms, but howabout getting them|out? Is it just as simple? | Thanx, | ES Eric, sorry to be the list meanie, but please don't hijack threads like this, it makes searching the mailing list archives very frustrating. 8( Please read the Mailing List Etiquette which can be found at the community Twiki: http://mandrake.vmlinuz.ca/bin/view/Main/MandrakeMailingListEtiquette Also you can check out.. http://qa.mandrakesoft.com/twiki/bin/view/Main/urpmi for information about urpmi, should get ya started 8) HTH RickS +--+ MandrakeLinux 10.0 official - 2.6.3-13mdk-i686-up-4GB gpg --recv-keys --keyserver www.keyserver.net 0x24AABE61 +--+ The Poems, all three hundred of them, may be summed up in one of their phrases: Let our thoughts be correct. -- Confucius -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.4 (GNU/Linux) iD8DBQFAyjuuJo/ckCSqvmERAoe+AJ0YEC5rHAvuH1OR3PZHL7x+y4uB5wCdGO7E w+ZvOcWX/bL2huN5iDyWVxU= =6Jvl -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] user login problems ...
Hi all, I cannot login as my normal user to any window manager or even at init 3 but if I su to ricks [bash 09:31 PM] [EMAIL PROTECTED]:ricks]$ su ricks [bash 09:31 PM] [EMAIL PROTECTED]:~/ricks]$ ll it will let me login but running an app ... [bash 09:31 PM] [EMAIL PROTECTED]:~/ricks]$ sylpheed Xlib: connection to :0.0 refused by server Xlib: No protocol specified Gtk-WARNING **: cannot open display: :0 or even this [bash 09:40 PM] [EMAIL PROTECTED]:~/ricks]$ opera Xlib: connection to :0.0 refused by server Xlib: No protocol specified opera: cannot connect to X server :0 Any ideas how to fix this ? RickS Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] user login problems ...
On Fri, 11 Jun 2004 21:26:26 -0500 Mikkel L. Ellertson [EMAIL PROTECTED] wrote: RickS wrote: Hi all, I cannot login as my normal user to any window manager or even at init 3 but if I su to ricks [bash 09:31 PM] [EMAIL PROTECTED]:ricks]$ su ricks [bash 09:31 PM] [EMAIL PROTECTED]:~/ricks]$ ll it will let me login but running an app ... [bash 09:31 PM] [EMAIL PROTECTED]:~/ricks]$ sylpheed Xlib: connection to :0.0 refused by server Xlib: No protocol specified Gtk-WARNING **: cannot open display: :0 or even this [bash 09:40 PM] [EMAIL PROTECTED]:~/ricks]$ opera Xlib: connection to :0.0 refused by server Xlib: No protocol specified opera: cannot connect to X server :0 Any ideas how to fix this ? RickS It sounds like you have two seperate problems here. I'll take a stab at the easy one first. If you are starting X as root, you will not be able to run X programs as a normal user. Thx .. makes sense to me 8) Now, as for not being able to log in as a normal user, if would be helpfull to know what kind of error message. Without that, the only thing I can think of is to check /etc, and see if there is a nologin file. This file is normaly created when you use shutdown with a delay time, and prevents normal users from logging in. If this file is still there for some reasion, deleting it will allow normal logins again. Mikkel thx Mikkel, There wasnt a nologin file in /etc .. and I can't find any error messages .. ?? or nothing in the logs .. I reboot and autologin doesn't work so it dumps back to login and thats where I would login to root. I also added a user that can access and start kde or fluxbox with no problems ... jus not sure where to look anymore ? RickS Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] user login problems ...
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Fri, 11 Jun 2004 22:01:28 -0500 Mikkel L. Ellertson [EMAIL PROTECTED] wrote: |RickS wrote: | | thx Mikkel, There wasnt a nologin file in /etc .. and I can't | find any error messages .. ?? or nothing in the logs .. I reboot | and autologin doesn't work so it dumps back to login and thats | where I would login to root. I also added a user that can access | and start kde or fluxbox with no problems ... | | jus not sure where to look anymore ? | | RickS | |Oh, autologin doesn't work. I thought you could not log in as a |normal user at the login prompt. sorry I meant I couldn't login as myself and as a result autologin wouldn't work. | |Mikkel |-- but I copied the .Xauthority file from the user I created to my current normal user $HOME and it's now working .. not sure what happened though. RickS +--+ MandrakeLinux 10.0 official - 2.6.3-13mdk-i686-up-4GB gpg --recv-keys --keyserver www.keyserver.net 0x24AABE61 +--+ Nothing is so firmly believed as that which we least know. -- Michel de Montaigne -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.4 (GNU/Linux) iD8DBQFAynhSJo/ckCSqvmERAolqAJ0UjXt2I11U9t2pEMHzHDVOsV5JCQCfcg/+ qSYAzzWxgLbfe+gIM3o8Lg0= =dKAv -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] user login problems ...
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Fri, 11 Jun 2004 22:01:28 -0500 Mikkel L. Ellertson [EMAIL PROTECTED] wrote: |RickS wrote: | | thx Mikkel, There wasnt a nologin file in /etc .. and I can't find| any error messages .. ?? or nothing in the logs .. I reboot and| autologin doesn't work so it dumps back to login and thats where I| would login to root. I also added a user that can access and start| kde or fluxbox with no problems ... | | jus not sure where to look anymore ? | | RickS | |Oh, autologin doesn't work. I thought you could not log in as a normal |user at the login prompt. You can run bootdrake, and check to make sure |it is still set to autologin, and that the correct user is selected. |Also, if you have not set a password for a user, you will not be able to |log in, even though you can autologin as that user at boot.| |Mikkel |-- btw .. thanks again for the help 8) RickS +--+ MandrakeLinux 10.0 official - 2.6.3-13mdk-i686-up-4GB gpg --recv-keys --keyserver www.keyserver.net 0x24AABE61 +--+ Intellect annuls Fate. So far as a man thinks, he is free. -- Ralph Waldo Emerson -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.4 (GNU/Linux) iD8DBQFAynnMJo/ckCSqvmERAk9xAKCn5lLt94N6twUpo6brRk3CnYq+egCeN2SQ t+QVWJK74bWFnb1uRXEed78= =yPiF -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Sound
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Thu, 10 Jun 2004 20:33:38 -0400 Teilhard Knight [EMAIL PROTECTED] wrote: [...} | But perhaps there are |ways I do not know about to check which|installed programs there |are, huh?| |Cordially, | |Teilhard [...] Hi Teilhard, I started using linux over 9 months ago and someone suggested this.. Greg Meyer maybe ? IIRC any way .. you can go to Mandrake Control Center [mcc] -- then to Software management -- Remove and .. with no intention of removing any packages 8) .. just click on any of the installed programs for their information .. make suremaximum information is checked, so you can take a look at the list offiles that are installed from a package. :: or the longer way :: in a terminal you can type: $ rpm -qa | sort ~/rpmlist-`date +%d%m%y_%I%M`.txt will create a file like this with the current date at the current time: rpmlist-100604_0904.txt which is a sorted list of all rpm packages installed that you can read in any text editor 8) and save for later. and for any package name you can get the information of by typing: $ rpm -qi packagename or for the list of files a package will install: $ rpm -ql packagename also .. $ man rpm in a terminal or in konqueror type man:rpm for more info check out www.urpmi.org for info on urpmi HTH RickS +--+ MandrakeLinux 10.0 official - 2.6.3-13mdk-i686-up-4GB gpg --recv-keys --keyserver www.keyserver.net 0x24AABE61 +--+ There's only one everything. -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.4 (GNU/Linux) iD8DBQFAyQmsJo/ckCSqvmERAmcnAKC2/diorRSRgN+Vt+zTlvtMH0wjoACcDjBw S7KT1E4tZqKlv8CQU7xKh3U= =NLjM -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] Sylpheed-claws etpan mime error ?
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi all, I get this error for sylpheed-claws when clicking on a mailing list email ... Content-Type: multipart/x-verified; boundary=40c6351f_18e16168_1863 Content-Type: text/plain Content-Transfer-Encoding: 8bit S/MIME verify signed message Error loading file /home/ricks/.sylpheed/tmp/libetpan-privacy-M5EGJb S/MIME verification FAILED It was from this email: Content-Type: text/plainFrom: sylvain costard [EMAIL PROTECTED] To: [EMAIL PROTECTED] Subject: Re: [Cooker] xorg broken on mirrors Date: Tue, 08 Jun 2004 11:40:34 +0200 User-Agent: Mozilla Thunderbird 0.6 (X11/20040521) Is there something I'm missing in my setup? err Google didnt help me this time .. Any help is appreciated 8-) RickS +--+ MandrakeLinux 10.0 official - 2.6.3-13mdk-i686-up-4GB gpg --recv-keys --keyserver www.keyserver.net 0x24AABE61 +--+ The savior becomes the victim. -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.4 (GNU/Linux) iD8DBQFAxlJSJo/ckCSqvmERAtRCAJwM+zyVk9DxOVxXOg2bWpBpvbCqsQCcCscD t5UlkOwg+AYGC2LOs8pgKAQ= =2Wn7 -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Sylpheed-claws etpan mime error ?
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Tue, 8 Jun 2004 23:32:43 -0400 Charles A Edwards [EMAIL PROTECTED] wrote: |On Tue, 8 Jun 2004 19:57:06 -0400 |RickS wrote: | | Is there something I'm missing in my setup? | err Google didnt help me this time .. | ||For digital sigs you need the root cert. of the issuing entity and they|need to be installed in the manner of the plugin README. | |Without said cert. messages using such will not be displayed if the |privacy plugin is used. | | | |Charles Thanks Charles, I thought as much. I'll check into the Plugin README. RickS +--+ MandrakeLinux 10.0 official - 2.6.3-13mdk-i686-up-4GB gpg --recv-keys --keyserver www.keyserver.net 0x24AABE61 +--+ Superstition, idolatry, and hypocrisy have ample wages, but truth goes a-begging. -- Martin Luther -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.4 (GNU/Linux) iD8DBQFAxpgjJo/ckCSqvmERAkXwAJ9H5Hc3GStCOy8tIcv+z+KofVR8jQCeKZkS P/bpUWUUWg0TGi3txRZAV6E= =15b2 -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] MD10 CE, USB HUB and Nvida N2 and MCC settings
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Sat, 15 May 2004 17:06:54 +0100 John Richard Smith [EMAIL PROTECTED] wrote: RickS wrote: [snip] I downloaded a good few later kernels to test but suppose that to be unnecessary now ? John naa h I gues not .. ;) Glad to hear its all workin better .. 8) RickS - -- Mandrake Linux release 10.0 (Official) for i586 Linux 2.6.5-1.tmb.5mdk-i686-up-4GB i686 gpg --recv-keys --keyserver www.keyserver.net 0x24AABE61 + If your advance is going well, you are walking into an ambush -- Murphy's Military Laws n°6 -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.4 (GNU/Linux) iD8DBQFAp8cYJo/ckCSqvmERAvSGAKC6DeG0fG0qWNzGflKA2QLTujOMYQCfcNyE G7O613XHILZKf+lrdITmxzA= =4tAZ -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] overnight freezing
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Thu, 13 May 2004 19:25:50 +0100 Bill Winegarden [EMAIL PROTECTED] wrote: Hi, I have searched the archives but I came up empty on this particular issue. I have LM10 CE installed on a Dell laptop dual booting win2k. Aside from a video resolution issue, LM10 is a nice release for me. One annoying issue, however, is that if I leave my machine on overnight, it is locked up tight by morning. Nothing but a hard reboot will get it back. Ctl - Alt - F1 etc. doesn't respond. I can't get to a command line at all to try and figure it out. Is there a log file somewhere that might be recording events leading up to the freeze? BTW, I have a simple 'clock' screensaver enabled but 'power management' is not enabled. Also, is there any pressing reasons to upgrade to official? Yes official is official and CE is more like a Release candidate. So Official is better. Although, YMMV .. thanks for your ideas, Bill W. Bill, I had a similar problem with suspend/sleep mode that was related to acpi for the 2.6 kernels. For Mdk 9.2.1 and 2.4 kernels, I had to set lilo append to nolapic but for the 2.6 kernels and my nForce2. I had to use the lapic since it is enabled in these kernels. But it would still lock up until I installed a tmb kernel.. see my sig .. that fixed my nForce2 issues. It's still a test kernel, although it works for me. But we need more info ... what kernel are you using ? does your bios support acpi ? Have you tried noacpi or nolapic or acpi=off in your lilo append line ? Have you tried the newbie archive for this problem ? http://marc.theaimsgroup.com/?l=mandrake-newbier=1w=2 or the expert list archive: http://marc.theaimsgroup.com/?l=mandrake-expertr=1w=2 or even cooker .. http://marc.theaimsgroup.com/?l=mandrake-cookerr=1w=2 incase someone has already asked this and resolved it. And as always google is your friend .. dell+lockup+mdk 10 or something like that .. HTH RickS - Mandrake Linux release 10.0 (Official) for i586 Linux 2.6.5-1.tmb.5mdk-i686-up-4GB i686 gpg --recv-keys --keyserver www.keyserver.net 0x24AABE61 + No inspection ready unit has ever passed combat -- Murphy's Military Laws n°65 -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.4 (GNU/Linux) iD8DBQFApEQDJo/ckCSqvmERAvqkAJ4mRCET5tgpgw2IpWwX/0pocVpRQQCgmTZd 7YtWNA/gF0I2xViLqqpLjPs= =9Izl -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Why is my FAT always corrupted by Linux?
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Thu, 13 May 2004 16:00:24 -0500 David A. Ferguson [EMAIL PROTECTED] wrote: I dual boot between Linux and W2k. I store the shared data on a FAT. Whenever I write to it from Linux it almost always comes up corrupted. Is there some special setting I should have in my 'fstab' or something? It is so bad that it is basically useless. I don't do anything special just open KWrite, enter some journal entries and exit. Thanks...David David, You may already know this but.. are you sure its FAT and not NTFS .. I dont have W2K, but IIRC it uses NTFS and Linux can't write to it. It can read NTFS .. just no writing to it. or it could be that kwrite is saving it in unix format which has a different EOL character, so you could look into dos2unix, which will convert between the 2 different types. or I could be way off with my guessing HTH .. somehow 8) RickS - -- Mandrake Linux release 10.0 (Official) for i586 Linux 2.6.5-1.tmb.5mdk-i686-up-4GB i686 gpg --recv-keys --keyserver www.keyserver.net 0x24AABE61 + Make it too tough for the enemy to get in, and you won't be able to get out -- Murphy's Military Laws n°53 -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.4 (GNU/Linux) iD8DBQFApEgbJo/ckCSqvmERAjYQAKCXqNcUlW2pLIl4UUg1R2S64zczfwCfc+eC +yNdgQvUrR5Oz9JcmJDs+UE= =U8bi -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] MD10 CE, USB HUB and Nvida N2 and MCC settings
On Tue, 04 May 2004 13:35:39 +0100 John Richard Smith [EMAIL PROTECTED] wrote: RickS wrote: On Mon, 03 May 2004 13:42:17 +0100 John Richard Smith [EMAIL PROTECTED] wrote: MD10 CE, USB HUB and Nvida N2 and MCC settings MCC - Hardware - Hardware - USB controllers - shows 6 entries :- nForce2 USB 1.0 )HCI Controller nForce2 USB 1.0 )HCI Controller nForce2 USB2.0 Enhanced Controller nVidia Corporation bForce2 USB 2.0 EHCI Controller USB OHCI Root Hub USB OHCI Root Hub I don't know why two entries appear twice but at any rate all aspects of the USB hub and the related NVIDIA nForce MCP2 Southbridge USB controller chip seem to show up clearly. John, I have an nForce2 MB also with the same USB controllers. And there are 2 usb ports on rear panel for v1.0 and 2 on the front panel for either usb v1 and v2 respectively. I have 4 USB ports to rear and 2 USB ports plus the bios LED's to header panel(which I actually have in the back, no matter) but since I haven't got them set up and working yet I cannot say which are USB1or2, though I'm kind of hoping they are all either USB1 or USB2 according to the equipement that gets plugged in. I think your right. The first three entires have a tab called Configure Module whereyou are invited to make some entries in the fields provided. The field begins, log2_irq_thresh. And it says you can configure each parameter of the module here Since my MD10 CE USB hub does not work properly, I thought there may be something one can add here to assist the USB hub to work better, I don't suppose anyone has any experience of what may be inserted here ? Any suggestions welcomed. John I started with mdk 10 official and had some problems with acpi for the 2.6.3-7 kernel. lilo.conf was set to acpi=ht was giving me irq's that were shared, so I had no sound and no networking eth0. what kernel are you running ? I did the standard MD10.0 CE install which supplies both, vmlinuz-2.4.25-2mdk with, append=devfs=mount acpi=ht resume=/dev/hda15 splash=silent and, vmlinuz-2.6.3-4mdk with, append=devfs=mount acpi=ht resume=/dev/hda15 splash=silent You think I should change, acpi=ht to apic=off ? I can boot either. can you type $cat /proc/interrupts [EMAIL PROTECTED] root]# cat /proc/interrupts CPU0 0: 233653 XT-PIC timer 1: 1687 XT-PIC keyboard 2: 0 XT-PIC cascade 4: 86597 XT-PIC serial 5: 24392 XT-PIC usb-ohci, NVidia nForce2 6:994 XT-PIC floppy 8: 1 XT-PIC rtc 10: 0 XT-PIC usb-ohci 11: 232076 XT-PIC ehci_hcd, eth0 12: 160765 XT-PIC PS/2 Mouse 14: 13022 XT-PIC ide0 15: 36228 XT-PIC ide1 NMI: 0 LOC: 233617 ERR: 64 MIS: 0 To which I deduct 5 and 10 pertain. Cannot see a conflict there. But no usb-uhci ??? Which I assume to be the USB2 if I had it working . It looks as though your not using local apic which is included in the the 2.6.3-7 kernel. you can check /usr/src/linux-2.6.3-7/arch/i386/defconfig* to find out what was confgured in any kernel and /usr/src/linux-2.6.3-7/Documentation/kernel-parameters.txt to read what lilo append will accept, if ya didn't already know. but.. my box is using lapic with the tmb kernel. And the 2.6.3-7 would work with lapic but wouldnt come from suspend. Mark Annandale posted that he put 'noapic lapic' in lilo and IIRC this was posted before as a fix, and he seems to be working now. You could try that and see if this fixes anything .. I didn't try the 2.4.25 kernel but I could boot the 2.6.3-7 kernel and sound worked but no eth0 and was having DMA issues. I did have a share with usb-ohci and eth0 on irq 12 which seemed to be the problem. my interrupts are like this now. [-bash 05:27 PM] [EMAIL PROTECTED]:~/bin]$ cat /proc/interrupts CPU0 0: 84119619 local-APIC-edge timer 1: 16684IO-APIC-edge i8042 6:141IO-APIC-edge floppy 8: 1IO-APIC-edge rtc 9: 0 IO-APIC-level acpi 12:1277024IO-APIC-edge i8042 14: 261038IO-APIC-edge ide0 15: 13866IO-APIC-edge ide1 16: 55591 IO-APIC-level eth0 18: 3151 IO-APIC-level EMU10K1 19:6457088 IO-APIC-level nvidia 20: 0 IO-APIC-level ohci_hcd 21: 0 IO-APIC-level ehci_hcd 22: 340421 IO-APIC-level ohci_hcd NMI: 0 LOC: 84116097 ERR: 0 MIS: 0 Funny enough , once I sorted the sound driver out it is working nice. Except I have no aRts for some reason and therefore the sound card(chip) is not set up to be shared. I don't know what happened to aRts , why that should not of been
Re: [newbie] Test
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Mon, 3 May 2004 22:19:43 -0400 JoeHill [EMAIL PROTECTED] wrote: On Mon, 3 May 2004 22:03:10 -0400 Carroll Grigsby disseminated the following: Not sure if the list is broken or if I've been cut off again. The last message here was ACPI and MDK 10 on a Presario... by Troy Davidson about 4 hours ago. ...looks like Sympa took a little time off this afternoon, the archives match up with what I'm seeing locally. For once I'm kinda glad, I sent something to the list that I should know not to, so far no sign of it. -- JoeHill / RLU #282046 / www.orderinchaos.org 22:16:55 up 20 days, 7:17, 5 users, load average: 0.41, 0.34, 0.18 +++ The US is our trading partner, our neighbour, our ally and our friend... and sometimes we'd like to give them such a smack! -- Rick Mercer I just recv'd over 1000 bug list reports, so someone did a spring cleaning on cooker bugzilla. Theres complaints on cooker mailing list. See this.. Intentional cleanup: http://archives.mandrakelinux.com/cooker/2004-04/msg02591.php Somehow all the lists must have been affected. - Mandrake Linux release 10.0 (Official) for i586 Linux 2.6.5-1.tmb.5mdk-i686-up-4GB i686 gpg --recv-keys --keyserver www.keyserver.net 0x24AABE61 + You will always get the greatest recognition for the job you least like -- Murphy's Laws on Work n°27 -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.4 (GNU/Linux) iD8DBQFAlwE5Jo/ckCSqvmERAkloAJ9+GVh4zizJhgVQ+7DtU9eeGcnUZACggocp EJBpavJJV7v0F5BVxRzfR0w= =e5Ba -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] MD10 CE, USB HUB and Nvida N2 and MCC settings
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Mon, 03 May 2004 13:42:17 +0100 John Richard Smith [EMAIL PROTECTED] wrote: MD10 CE, USB HUB and Nvida N2 and MCC settings MCC - Hardware - Hardware - USB controllers - shows 6 entries :- nForce2 USB 1.0 )HCI Controller nForce2 USB 1.0 )HCI Controller nForce2 USB2.0 Enhanced Controller nVidia Corporation bForce2 USB 2.0 EHCI Controller USB OHCI Root Hub USB OHCI Root Hub I don't know why two entries appear twice but at any rate all aspects of the USB hub and the related NVIDIA nForce MCP2 Southbridge USB controller chip seem to show up clearly. I have an nForce2 MB also with the same USB controllers. And there are 2 usb ports on rear panel for v1.0 and 2 on the front panel for either usb v1 and v2 respectively. my printer is usb plugged into rear panel and working now. The first three entires have a tab called Configure Module where you are invited to make some entries in the fields provided. The field begins, log2_irq_thresh. And it says you can configure each parameter of the module here Since my MD10 CE USB hub does not work properly, I thought there may be something one can add here to assist the USB hub to work better, I don't suppose anyone has any experience of what may be inserted here ? Any suggestions welcomed. John, I started with mdk 10 official and had some problems with acpi for the 2.6.3-7 kernel. lilo.conf was set to acpi=ht was giving me irq's that were shared, so I had no sound and no networking eth0. what kernel are you running ? can you type $cat /proc/interrupts I played with kernel-parameters for acpi, which were acpi=on apic=off and nolapic ... but none of these worked. but I set lapic in lilo.conf to use local apic and it gave me sound, and internet connectivity, but now my problem was my desktop would go into sleep mode and not return 8( So I installed Thomas's tmb kernel and set lilo to lapic and now all is working. The change log for this kernel fixed some nForce2 problems: (from the changeloglist) Thomas Backlund [EMAIL PROTECTED] 2.6.5-1.tmb.5mdk - - iteraid 1.44 - - fix kernel-source include strip for ppc64 - - disable CONFIG_FB_ATY_XL_INIT in ppc - - misc fixes and addons from 2.6.5-sls9 (Svetljo) * support for VIA CLE266 framebuffer * support for VIA6410 IDE and VIA6421 SATA * acpi 20040426, processor-load, link-tolerant * cpufreq 20040419, userspace warning * nForce2 ioapic fix * nForce2 idle lockups fix HTH RickS - Mandrake Linux release 10.0 (Official) for i586 Linux 2.6.5-1.tmb.5mdk-i686-up-4GB i686 gpg --recv-keys --keyserver www.keyserver.net 0x24AABE61 + Success is just a matter of luck, just ask any failure -- Murphy's Laws on Work n°35 -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.4 (GNU/Linux) iD8DBQFAltGfJo/ckCSqvmERAsTgAJ93CojE0UqHH7nMkU0OAk4NPj0ZtACZAe3J WtWP0iVGQ5n4LfY6tnMZsJc= =QQv7 -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] MD10 CE, USB HUB and Nvida N2 and MCC settings
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Mon, 03 May 2004 13:42:17 +0100 John Richard Smith [EMAIL PROTECTED] wrote: MD10 CE, USB HUB and Nvida N2 and MCC settings MCC - Hardware - Hardware - USB controllers - shows 6 entries :- nForce2 USB 1.0 )HCI Controller nForce2 USB 1.0 )HCI Controller nForce2 USB2.0 Enhanced Controller nVidia Corporation bForce2 USB 2.0 EHCI Controller USB OHCI Root Hub USB OHCI Root Hub I don't know why two entries appear twice but at any rate all aspects of the USB hub and the related NVIDIA nForce MCP2 Southbridge USB controller chip seem to show up clearly. John, I have an nForce2 MB also with the same USB controllers. And there are 2 usb ports on rear panel for v1.0 and 2 on the front panel for either usb v1 and v2 respectively. my printer is usb plugged into rear panel and working now. The first three entires have a tab called Configure Module where you are invited to make some entries in the fields provided. The field begins, log2_irq_thresh. And it says you can configure each parameter of the module here Since my MD10 CE USB hub does not work properly, I thought there may be something one can add here to assist the USB hub to work better, I don't suppose anyone has any experience of what may be inserted here ? Any suggestions welcomed. John I started with mdk 10 official and had some problems with acpi for the 2.6.3-7 kernel. lilo.conf was set to acpi=ht was giving me irq's that were shared, so I had no sound and no networking eth0. what kernel are you running ? can you type $cat /proc/interrupts I played with kernel-parameters for acpi, which were acpi=on apic=off and nolapic ... but none of these worked. so I set lapic in lilo.conf to use apic and it gave me sound, and internet connectivity, but now my problem was my desktop would go into sleep mode and not return 8( So I installed Thomas's tmb kernel and set lilo to lapic and now all is working. The change log for this kerenel fixed some nForce2 problems: (from the changeloglist) Thomas Backlund [EMAIL PROTECTED] 2.6.5-1.tmb.5mdk - - iteraid 1.44 - - fix kernel-source include strip for ppc64 - - disable CONFIG_FB_ATY_XL_INIT in ppc - - misc fixes and addons from 2.6.5-sls9 (Svetljo) * support for VIA CLE266 framebuffer * support for VIA6410 IDE and VIA6421 SATA * acpi 20040426, processor-load, link-tolerant * cpufreq 20040419, userspace warning * nForce2 ioapic fix * nForce2 idle lockups fix HTH RickS - Mandrake Linux release 10.0 (Official) for i586 Linux 2.6.5-1.tmb.5mdk-i686-up-4GB i686 gpg --recv-keys --keyserver www.keyserver.net 0x24AABE61 + Success is just a matter of luck, just ask any failure -- Murphy's Laws on Work n°35 -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.4 (GNU/Linux) iD8DBQFAlrhNJo/ckCSqvmERAvkDAKCqpgqfiRHjODM7Y6+eB0ygmFTwqwCgqYBL 7UlgYNM1n8aUj/1tbOQj7W8= =B9E6 -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] chkrootkit question ...
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Mon, 19 Apr 2004 14:33:50 +1000 Stephen Kuhn [EMAIL PROTECTED] wrote: On Mon, 2004-04-19 at 14:28, RickS wrote: hmm.. I will give that a go and see what happens, I cant get to it til tomorrow since its 12:30am here in detroit .. time for some sleep :) 11 mile and Schoenherr - Warren. That's where I did most of my grownin' up. Detroit sucks - yech. Went to high school downtown near City Airport. Small world, ay? stephen kuhn - owner Small world for sure... but as Steven Wright said, I wouldnt want to paint it. So you were an east-sider ... but Oh my, you didnt just get outta state.. you jumped continents.. good for you 8) cause 90 sunny days here a year just isn't enough 8( been nice the last couple days tho.. I'm at merriman and mich ave .. a west-sider .. but Detroit is still more or less the same except the Pistons and Tigers are playin very well 8) Found some info online through google since I didnt know what aliens meant .. yet ..but gonna get the server re-installed and update the kernel, so may be off for a lil while, thx for the help Stephen, Always a pleasure Ricks - Linux 2.4.22-28mdkenterprise i686 gpg --recv-keys --keyserver www.keyserver.net 0x24AABE61 + BOFH excuse #432: Borg nanites have infested the server -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.3 (GNU/Linux) iD8DBQFAhD2vJo/ckCSqvmERAlZIAKCea3UzDmqXpx9h1DnQ6Y7YEAkN1QCgwaUB J1BK3lugoxb6UIK4W5U8gd0= =QB6x -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] chkrootkit question ...
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Mon, 19 Apr 2004 14:13:10 +1000 Stephen Kuhn [EMAIL PROTECTED] wrote: On Mon, 2004-04-19 at 14:08, RickS wrote: yes Stephen I can log into it from the server as my normal user.. and from the client pc as a user then su to root .. yes .. so on the client I closed the terminal that was running the ssh and somehow it didnt close the connection .. I plan on reinstalling 9.2 to start from scratch anyway, but I was wondering if this chkrootkit log message was the result of that instance ... since nothing else was in the logs and theres no evidence of being cracked AFAICT ... Ya know, after you've reinstalled, login at least once as root; not an su or sudo, but really - right on the console; then if that message is ever repeated you'll KNOW somethings fishy; have you run chkrootkit with the: chkrootkit aliens test/option to see if anything strange was up there? stephen kuhn - owner == illawarra computer services a kuhn media australia company http://kma.0catch.com hmm.. I will give that a go and see what happens, I cant get to it til tomorrow since its 12:30am here in detroit .. time for some sleep :) - Linux 2.4.22-28mdkenterprise i686 gpg --recv-keys --keyserver www.keyserver.net 0x24AABE61 + BOFH excuse #262: Our POP server was kidnapped by a weasel. -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.3 (GNU/Linux) iD8DBQFAg1V9Jo/ckCSqvmERAh9TAJ9F4P+2t1d0Duq5eu5PWhInRRNgRQCfSdTG yBqcaiYXgk3UF9Mmdpwd0z8= =CrjO -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] RPM Installed...Now how do I run the app??
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Tue, 13 Apr 2004 12:37:40 +1200 shaz [EMAIL PROTECTED] wrote: snip See also $man mjpegtools HTH Tks... still cant follow it... manual is too much gibberish for newbie linux user (me) any gui based? all I want to do is convert divx to vcd TIA Shaz Hi Shaz I would try try the archive mailing lists http://marc.theaimsgroup.com/ and google also .. for example divx+vcd+linux But to see what files an rpm installed use: rpm -ql mjpegtools also try the /usr/share/doc/mjpegtools-1.6.1 for more information, it will contain a hints file you should read. I HTH RickS - Registered Linux user #338463 http://counter.li.org/ Linux 2.4.22-28mdkenterprise #1 SMP Thu Feb 19 19:01:51 MST 2004 i686 gpg --recv-keys --keyserver www.keyserver.net 0x24AABE61 + BOFH excuse #126: it has Intel Inside -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.3 (GNU/Linux) iD8DBQFAe1KCJo/ckCSqvmERAgfVAJ9BxBkcQ/jjJOQGGwTVPNKMGPZFPACfZaRn w9wqe+xDSOIsrveFC4j9ra0= =DRcv -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Signature Scripts
On Fri, 09 Apr 2004 16:20:29 +1200 David [EMAIL PROTECTED] wrote: Guys, Gals Now that the problem of accessing secure pages is sorted out I've loaded forture to my machine and wrote the following script: (a first for me, and based on what I saw in a simular titled thread from last month) #bin bash echo David Taylor echo Taranaki, New Zealand echo on a 100% Linux, Mandrake OS, computer echo this mails gem: echo `/usr/games/fortune` I've saved this in home/david/bin. I've directed my client to signature on command output and have given it the path of home/david/bin/.signature It does not generate. I guess the problem is in my scripting skills, but any help would be appreciated in getting them improved upon. You may rewrite it if you wish and send it back to me thus giving me a chance to compare and learn. Regards David Hey guys, I'm a newbie scriptor also, but shouldnt the first line be: #!/bin/bash with the path and the ! exclamation point so bash knows that its a script ? Registered Linux user #338463 http://counter.li.org/ Linux 2.4.22-28mdkenterprise #1 SMP Thu Feb 19 19:01:51 MST 2004 Mandrake Linux release 9.2 (FiveStar) for i586 ++ QOTD: I sprinkled some baking powder over a couple of potatoes, but it didn't work. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Menu Config
On Tuesday 10 February 2004 09:20 pm, Marc Resnick wrote: I remember once, with mdk9.2, before I reinstalled it today, I used a program that searched for stuff that wasn't on the KDE menu, but could be. I don't remember what it was called, where it was located, or anything. It's not menudrake, I know that, but I can't remember the name of it. Anyone have any suggestions, or know what I'm talking about? do you mean kappfinder ?? HTH -- RickS Linux user #338463 - Mdk 9.2 2.4.22-26mdk pgp0.pgp Description: signature
[newbie] module.conf loading joystick drivers question ?
Hello, I got my sidewinder joystick and SBlive gameport working with bascule's help by adding: emu10k1-gp joydev to modules. .. and from googling found this added it to modules.conf... alias char-major-13 analog rebooted .. then... $modprobe joydev then... $modprobe sidewinder in that order.. it works. I've been trying to get these modules loaded in module.conf but with no success. I've tried alias, probeall and modprobe ( which is a bad idea ) and read .. re-read the man pages, so what's the proper syntax for these command lines in modules.conf ? is this the correct file to add them to ? or would it be module. ? I tried different methods but to no avail. I'm not understanding somethings about the module loading, so can any one help please ? TIA -- RickS Linux user #338463 - Mdk 9.2 2.4.22-26mdk Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] module.conf loading joystick drivers question ?
On Saturday 31 January 2004 01:56 pm, bascule wrote: you need to list the modules in /etc/modules lines like: alias char-major-13 analog go into /etc/modules.conf i'd try without adding that line alias... line first, just to check if it's necessary, i don't have it for loading the analog module on my machine bascule 1st , thx for replying 8) /etc/modules. looks like this now scsi_hostadapter nvidia emu10k1-gp joydev sidewinder and I commented the alias line from modules.conf then reboot ... $ lsmod .. shows .. sidewinder 9848 0 (unused) joydev 7136 0 (unused) input 5696 0 [sidewinder joydev] emu10k1-gp 2184 0 (unused) gameport3268 0 [sidewinder emu10k1-gp] It doesn't seem to create the dev node this way. I tried a number of different ways but didn't write them down 8( do I need analog also ... I will soon 8) although, I really don't need the joystick loaded all the time and could just modprobe them before starting any games which require it, but its bugging not to know how to set this up to load at boot ... On Saturday 31 Jan 2004 6:04 pm, RickS wrote: Hello, I got my sidewinder joystick and SBlive gameport working with bascule's help by adding: emu10k1-gp joydev to modules. .. and from googling found this added it to modules.conf... alias char-major-13 analog rebooted .. then... $modprobe joydev then... $modprobe sidewinder in that order.. it works. I've been trying to get these modules loaded in module.conf but with no success. I've tried alias, probeall and modprobe ( which is a bad idea ) and read .. re-read the man pages, so what's the proper syntax for these command lines in modules.conf ? is this the correct file to add them to ? or would it be module. ? I tried different methods but to no avail. I'm not understanding somethings about the module loading, so can any one help please ? TIA -- RickS Linux user #338463 - Mdk 9.2 2.4.22-26mdk Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] module.conf loading joystick drivers question ?
On Saturday 31 January 2004 03:21 pm, bascule wrote: rick, when i said put the alias line in modules.conf but try without it i didn't mean to imply that you didn't need a reference to analog in /etc/modules, cos you do! oop - my mistake 8) although, thats what I obviously dont fully understand about each different syntax for these settings. I understand what alias implies not how to use it 8) yet ... the alias line simply tells the kernel that the module analog is the one that controls devices that have that major and minor number - or something like that, maybe someone else will explain:) but you will need to add analog to /etc/modules: scsi_hostadapter nvidia analog emu10k1-gp joydev sidewinder i see you have nvidia listed in /etc/modules, assuming you, like me are using the nvidia binary drivers do you not find that they are loaded automatically when X starts? there should be no need in a typical setup to specify the graphics driver, that is done in the config file for X and should be loaded from that reference, try it and see! bascule snip OK, I put in the order you showed and left the alias in modules.conf and I still dont have the dev node and jstest fails .. do I have to manually set the nod up .. js0 .. ?? it was being created when I would do the modprobes manually. -- RickS Linux user #338463 - Mdk 9.2 2.4.22-26mdk Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] module.conf loading joystick drivers question ?
On Saturday 31 January 2004 05:54 pm, bascule wrote: ok, you got me, i'm not sure, here are my two files: [EMAIL PROTECTED] bascule]$ cat /etc/modules scsi_hostadapter emu10k1-gp ns558 analog joydev the ns558 is for a second gameport so you don't need this, you will need the sidewinder module but you already have that listed [EMAIL PROTECTED] bascule]$ cat /etc/modules.conf alias eth0 8139too above snd-emu10k1 snd-pcm-oss alias sound-slot-1 snd-emu10k1 probeall scsi_hostadapter aic7xxx probeall usb-interface usb-uhci ehci-hcd #the following is to get the webcam working in large mode post-install pwc /sbin/insmod --force /lib/modules/usb/pwcx-2.4.20.o /dev/null 21 || : #alias char-major-195 nvidia alias /dev/nvidia* nvidia as you can see i have nothing in the latter file that relates to joysticks/gamesports, the device node should be created automatically, so i'm not sure how to help you any further bascule On Saturday 31 Jan 2004 9:57 pm, RickS wrote: OK, I put in the order you showed and left the alias in modules.conf and I still dont have the dev node and jstest fails .. do I have to manually set the nod up .. js0 .. ?? it was being created when I would do the modprobes manually. -- Well, yep thats about what mine says .. I'm gonna look into the kernel info docs and source and see what it says .. I I need to step away from this for a bit .. my thought process is starting to go to /dev/null 8) appreciate all the help 8) Thx -- RickS Linux user #338463 - Mdk 9.2 2.4.22-26mdk Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] MOHAA Linux Client
On Tuesday 27 January 2004 08:52 am, JoeHill wrote: On Mon, 26 Jan 2004 21:52:39 -0500 RickS disseminated the following: There's no 'installer', but it's easy to do. Hey Joe .. thx again ... Wow! what a difference 8-) Ya, I can run it at 1024x768 now, with more model details, and it's smoth. Isn't this just the best First Person Shooter *ever*? I've played through the whole game about 8 times now, and I never tire of it. Yeah, I don't tire of it either but my dad sure thinks so 8-) .. my mom wasn't to happy when I bought it for him .. Cant wait till the sound works better. I even found Freespace 2 installer Kewl ! Ya, I snagged Freespace 2. Very cool game, but I just get lost with all the controls. I gotta invest in a decent joystick, I'm sure it's a lot more fun that way. I have yet to get my joystick working 8( and Freespace is best played with one 8-) BTW .. how would/did you get yours working ? as a module or part of the kernel ? should probably start a new thread .. huh -- RickS Linux user #338463 - Mdk 9.2 2.4.22-26mdk Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] testing
-- RickS Linux user #338463 - Mdk 9.2 2.4.22-26mdk Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] MOHAA Linux Client
On Tuesday 27 January 2004 08:52 am, JoeHill wrote: On Mon, 26 Jan 2004 21:52:39 -0500 RickS disseminated the following: There's no 'installer', but it's easy to do. Hey Joe .. thx again ... Wow! what a difference 8-) Ya, I can run it at 1024x768 now, with more model details, and it's smoth. Isn't this just the best First Person Shooter *ever*? I've played through the whole game about 8 times now, and I never tire of it. Yep it is .. I don't tire of it either AND my dad sure thinks so 8-) .. my mom wasn't to happy when I bought it for him .. Cant wait till the sound works better. I even found Freespace 2 installer Kewl ! Ya, I snagged Freespace 2. Very cool game, but I just get lost with all the controls. I gotta invest in a decent joystick, I'm sure it's a lot more fun that way. I have yet to get my joystick working 8( and Freespace is best played with one 8-) BTW .. how did you get yours working ?? I run mdk 9.2 I have the 1.2.15 rpm from contrib, but I am missing the device /dev/js0 ?? I am still googling on this so far -- RickS Linux user #338463 - Mdk 9.2 2.4.22-26mdk Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] Cant get a joystick for SBlive Sound card gameport working ..
Thx Bascule, I tried it but I thought I would start a new thread ... thread was ... ((Re: [newbie] MOHAA Linux Client)) On Wednesday 28 Jan 2004 3:15 am, RickS wrote: I have yet to get my joystick working 8( and Freespace is best played with one 8-) BTW .. how did you get yours working ?? I run mdk 9.2 I have the 1.2.15 rpm from contrib, but I am missing the device /dev/js0 ?? I am still googling on this so far . Rick, on my machine i use a cyborg3d attached to a the gameport on the motherboard, this requires the following modules in my /etc/modules: joydev analog ns558 for the gameport on my sblive i have to add emu10k1-gp, bascule OK did this ... So I looked at Harddrak and the gameport/joystick shows up as unknown/others ? yet says this : Vendor: Creative Labs Bus: PCI Bus identification: 1102:7002:1102:20 Location on the bus: 0:9:1 Description: SB Live! (joystick) Module: emu10k1-gp Media class: INPUT_OTHER syslog says this when I modprobe for analog from CL : analog.c: Unknown joystick device found (data=0x1, gameport0), probably not analog joystick. -- I think its analog ? modprobe joydev gameport0: Emu10k1 Gameport at 0xd000 size 8 speed 1242 kHz So I wouldnt think I have to recompile the kernel do I ?? $ lsmod analog 9120 0 (unused) gameport3268 0 [emu10k1-gp analog] joydev 7136 0 (unused) input 5696 0 [analog joydev] so i did a $jstest input Joystick (Unknown) has 2 axes and 2 buttons. Driver version is 0.8.0. Testing ... (interrupt to exit) jstest: error reading: Is a directory Its a sidewinder precision pro joystick ... ( x-window user ) I googled .. and found the same info you indicated Bascule, but I still have no device node or is it named input Am I supposed to make one ... any help is appreciated TIA -- RickS Linux user #338463 - Mdk 9.2 2.4.22-26mdk Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Cant get a joystick for SBlive Sound card gameport working ..
On Wednesday 28 January 2004 12:16 am, bascule wrote: if it's working properly then the device files /dev/js0 etc will get created, at least they do on my system, i'm using devfs, not sure how that might change things, so you need to test using: $jstest /dev/js0 you might find that the device files exist but don't have the right permissions, esp if you have loaded the modules manually after running X, if they exist and you haven't put those modules into /etc/modules then do so and reboot, then try jstest, if /dev/js0 doesn't exist then i'm not sure, those modules are what i use for my sblive gameport (the ns558 is for the standard gameport which is on my motherboard), note that for me /dev/js0 is a symlink to /dev/input/js0 bascule $ jstest /dev/js0 jstest: No such file or directory /dev/input/ is empty So I am gonna read the devices.txt doc for this kernel and see how to setup the node. I cant get to it until tomorrow night, but thanks again for the help .. 8-) On Wednesday 28 Jan 2004 4:53 am, RickS wrote: so i did a $jstest input Joystick (Unknown) has 2 axes and 2 buttons. Driver version is 0.8.0. Testing ... (interrupt to exit) jstest: error reading: Is a directory Its a sidewinder precision pro joystick ... ( x-window user ) I googled .. and found the same info you indicated Bascule, but I still have no device node or is it named input Am I supposed to make one ... any help is appreciated -- RickS Linux user #338463 - Mdk 9.2 2.4.22-26mdk Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Cant get a joystick for SBlive Sound card gameport working ..
On Wednesday 28 January 2004 12:37 am, bascule wrote: i note also that there is a 'sidewinder' module listed in /lib/modules/2.../kernel/drivers/char/joystick/ perhaps for your joystick you also need this? try modprobe sidewinder as root, if this creates the device files then you will need to add this module to /etc/modules bascule On Wednesday 28 Jan 2004 5:16 am, bascule wrote: Its a sidewinder precision pro joystick ... ( x-window user ) Well Dang I didn't see that module .. and It works now 8-) and created the node in /dev/input/js0 awright thanks bascule Happy man 8-) -- RickS Linux user #338463 - Mdk 9.2 2.4.22-26mdk Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] MOHAA Linux Client
On Sunday 25 January 2004 11:31 pm, JoeHill wrote: On Sun, 25 Jan 2004 22:22:47 -0600 Troy T. Hall disseminated the following: ok wait, I'm confused, are you telling me i can take my pc version of MOHAA and install it under X? Well, you need to install MOHAA on Windows, then copy the data files over, or install it using WineX, then just untar and copy the Linux binaries into the root dir. There's no 'installer', but it's easy to do. Hey Joe .. thx again ... Wow! what a difference 8-) Cant wait till the sound works better. I even found Freespace 2 installer Kewl ! 8-) -- RickS Linux user #338463 - Mdk 9.2 2.4.22-26mdk Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] MOHAA Linux Client
On Sunday 25 January 2004 04:36 pm, JoeHill wrote: For those not on the MDKGames list, I just wanted to point out there's a new beta (2) of the Linux client for MOHAA. Playing MOHAA natively in Linux. M. *And* the README hints at support for Spearhead as well! Check it out: http://icculus.org/news/news.php?id=1846 I upped some screens of the Normandy Landing on Franki's screenshot site here: http://htmlfixit.com/mandrake/games/gallery.php?id=3 If you own this game...or, um, have it...somehow... it runs like a dream, in fact I think the graphics are a lot nicer in Linux than playing under WineX. Thx, Joe .. will definitely give it a try -- RickS echo Linux user #338463 uname -rm The day you leave work early to make it to class on time, the sensei will be sick -- Murphy's Laws of Martial Arts n°4 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] bittorrent: which version on 9.2?
On Sunday 25 January 2004 10:44 pm, Ramin wrote: Hi, May i know which version of bittorrent you are using on 9.2? I see there are 3.2.1b-6mdk, 3.3-2mdk, 3.3-3.92mdk, shadowsclient 5.8.7-1mdk available. The first one seems a beta version. The second one refused to install and apparently it is from unsupported. The third one want to remove kdelibs-commons before installing which i think is an important package so i should not remove it. The shadowsclient is an experimental one so not sure if it works OK. So which one would you recommend? Thanks, Ramin Hi Ramin, I'm have these installed bittorrent-gui-3.2.1b-6mdk bittorrent-3.2.1b-6mdk I am currently running from the CL, its workin fine .. -- RickS Linux user #338463 2.4.22-26mdk i686 mdk 9.2 pgp0.pgp Description: signature
[newbie] Cdrom mounting problems - K3b did it 8(
Hi All, not knowing any reason not to . I setup K3b to copy from cdrom (reader) to cdrom2 (burner) and changed the append line of lilo to add hdc=ide-scsi hdd=ide-scsi , since cdrdao complains about scsi not being enabled for all the devices ... Well it did work for K3b but I cant access the drive through any file manager since it wont read the proper device. I think hdc in /dev is .. now .. symlinked wrong ... it points to generic ? shouldn't it point to ../scsi/host0/bus0/target0/lun0/cd or even cdrom0 ?? TIA -- RickS Linux user #338463 -- 2.4.22-26mdk i686 If you have to use your training in self-defence, your assailant's father will be a lawyer -- Murphy's Laws of Martial Arts n°6 - Current setup - /dev -- lr-xr-xr-x 1 root root 13 Jan 20 05:55 cdrom - cdroms/cdrom0 lr-xr-xr-x 1 root root 13 Jan 20 05:55 cdrom0 - cdroms/cdrom0 lr-xr-xr-x 1 root root 13 Jan 20 05:55 cdrom1 - cdroms/cdrom1 lr-xr-xr-x1 root root 35 Jan 20 05:55 hdc - ide/host0/bus1/target0/lun0/generic lr-xr-xr-x1 root root 35 Jan 20 05:55 hdd - ide/host0/bus1/target1/lun0/generic /dev/cdroms -- drwxr-xr-x 1 root root 0 Dec 31 1969 cdroms/ lr-xr-xr-x1 root root 34 Dec 31 1969 cdrom0 - ../scsi/host0/bus0/target0/lun0/cd lr-xr-xr-x1 root root 34 Dec 31 1969 cdrom1 - ../scsi/host0/bus0/target1/lun0/cd fstab 9.2 - 1-18-2004 - /dev/hde1 / ext3 defaults 1 1 none /dev/pts devpts mode=0620 0 0 /dev/hde7 /home ext3 defaults 1 2 none /mnt/cdrom supermount dev=/dev/hdc,fs=udf:iso9660,ro,--,iocharset=iso8859-1 0 0 none /mnt/cdrom2 supermount dev=/dev/scd0,fs=udf:iso9660,ro,--,iocharset=iso8859-1 0 0 none /mnt/floppy supermount dev=/dev/fd0,fs=ext2:vfat,--,umask=0,codepage=850,sync,iocharset=iso8859-1 0 0 /dev/hda1 /mnt/win_c vfat umask=0,codepage=850,iocharset=iso8859-1 0 0 /dev/hdb1 /mnt/win_c2 vfat umask=0,codepage=850,iocharset=iso8859-1 0 0 /dev/hda5 /mnt/win_d vfat umask=0,codepage=850,iocharset=iso8859-1 0 0 /dev/hdb5 /mnt/win_d2 vfat umask=0,codepage=850,iocharset=iso8859-1 0 0 none /proc proc defaults 0 0 /dev/hde6 /usr ext3 defaults 1 2 /dev/hde5 swap swap defaults 0 0 mtab 9.2 - 1-18-2004 --- /dev/ide/host2/bus0/target0/lun0/part1 / ext3 rw 0 0 none /proc proc rw 0 0 none /proc/bus/usb usbfs rw 0 0 none /dev devfs rw 0 0 none /dev/pts devpts rw,mode=0620 0 0 /dev/ide/host2/bus0/target0/lun0/part7 /home ext3 rw 0 0 none /mnt/cdrom supermount ro,dev=/dev/hdc,fs=udf:iso9660,--,iocharset=iso8859-1 0 0 none /mnt/cdrom2 supermount ro,dev=/dev/scd0,fs=udf:iso9660,--,iocharset=iso8859-1 0 0 none /mnt/floppy supermount rw,sync,dev=/dev/fd0,fs=ext2:vfat,--,umask=0,codepage=850,iocharset=iso8859-1 0 0 /dev/ide/host0/bus0/target0/lun0/part1 /mnt/win_c vfat rw,umask=0,codepage=850,iocharset=iso8859-1 0 0 /dev/ide/host0/bus0/target1/lun0/part1 /mnt/win_c2 vfat rw,umask=0,codepage=850,iocharset=iso8859-1 0 0 /dev/ide/host0/bus0/target0/lun0/part5 /mnt/win_d vfat rw,umask=0,codepage=850,iocharset=iso8859-1 0 0 /dev/ide/host0/bus0/target1/lun0/part5 /mnt/win_d2 vfat rw,umask=0,codepage=850,iocharset=iso8859-1 0 0 /dev/ide/host2/bus0/target0/lun0/part6 /usr ext3 rw 0 0 automount(pid3156) /misc autofs rw,fd=5,pgrp=3156,minproto=2,maxproto=4 0 0 automount(pid3160) /net autofs rw,fd=5,pgrp=3160,minproto=2,maxproto=4 0 0 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Kernel Upgrade (does order matter?)
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Monday 12 January 2004 01:10 pm, JoeHill wrote: On Sun, 11 Jan 2004 19:22:53 -0500 JoeHill [EMAIL PROTECTED] wrote: Will this make a difference? ie., do you literally have to install the bootloader-utils first? Apparently, it doesn't matter :-) Hey Joe, there was a link to this page http://www.mandrakesecure.net/en/docs/magic.php ( Author: Vincent Danen) which suggests installing - 1st the newer Kernel , then its source and then I had to update the bootloader-utils. It worked for me. HTH - -- RickS Linux user #338463 2.4.22-26mdk i686 Why is there only ONE Monopolies Commission? -- Why Why Why n°47 -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.3 (GNU/Linux) iD8DBQFAAz+xTZfTYYmFuxYRAjaOAJ95ZDKoGJ564vZchLw+mVvdslcWGgCdH1kY QFSzBv+/7s8AkyeYR88RQUg= =CZFM -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] 9.2 Installing many packages trashes menu
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Friday 26 December 2003 07:39 am, Anne Wilson wrote: On Friday 26 December 2003 12:13, Josh wrote: There is an update that addresses this exact problem. I can't remember the exact update right now, but its rpm-something. You can't miss it. Josh IOW, try MandrakeUpdate Anne This is the update advisory that addresses this. I haven't had any problems since. Mandrake Linux Update Advisory ___ Package name: rpm Advisory ID:MDKA-2003:030-1 Date: December 4th, 2003 Original Advisory Date: November 18th, 2003 Affected versions: 9.2 __ Problem Description: A bug was found in the way that rpm locks it's database in that it prevents update-menus from running properly and can cause the loss of KDE, GNOME, and other WM menus. This package provides a better locking mechanism that should prevent this improper behaviour. Update: The previous package did not properly clean up the lock file when issuing a --rebuilddb. This has been corrected by these packages Mandrake Linux 9.2: popt-1.8-22.1.92mdk.i586.rpm popt-devel-1.8-22.1.92mdk.i586.rpm rpm-4.2-22.1.92mdk.i586.rpm rpm-build-4.2-22.1.92mdk.i586.rpm rpm-devel-4.2-22.1.92mdk.i586.rpm rpm-python-4.2-22.1.92mdk.i586.rpm rpm-4.2-22.1.92mdk.src.rpm HTH - -- RickS Linux user #338463 Why does Microsoft keep asking me Where do you want to go today? But Linux is the one that always takes me there 8] -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.3 (GNU/Linux) iD8DBQE/7Fffc8FpDuUpLEERAqh9AJwPpQGSrQM5yBrjGrUgdvWF/ANwAACfYago E4KC04HNMoL2rsW2mwm4FgE= =Byzl -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] new nic and I'm online
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Saturday 20 December 2003 04:41 pm, Lance Benton wrote: Ok, I gave up trying to get my nvidia nforce (onboard) NIC to work, so I put in another NIC I had laying around. I'm now online and emailing this list from KMail. I appreciate everyone's assistance and especially the words of encouragement. I'm sorry, but there's no looking back now. My basic requirements have been met, I can get to the web and have access to my email. The rest is exploratory and learning. Rick S, I will look into those books. I purchased Linux Complete by Sybex. It's a huge book with a lot of good information in it. Good for you Lance ;) I said the same thing about no looking back now. Funny, I was at my parents today watching xPee grind thru pages in IE 6 and my dad says, there must be a lot of people on the net (isp service) I told him no way it should be this slow for google pages (15 secs). Being a former dos batcher, I dont know much about xPee but this isnt right and what exactly is it doing behind this hour glass ? I won't go back either, I dont hate M$, I just dont like having much control anymore. So he's gonna try Linux when I can install it next week. Try a dual boot. He never used to know anything about PC's. I was gonna use texstar's PClinuxOS on his machine 1st to DEMO it to them. Anyway Good Luck and Happy reading ;) Regards - -- RickS Linux user #338463 -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.3 (GNU/Linux) iD8DBQE/5PMTc8FpDuUpLEERAmg9AJ96AkgC6ONdlYXNe+/aMEYHIg3fiACfQu2S 6R9GKipiaFup6rXhqEhirkI= =Z+1A -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] nForce and Mandrake 9.2 RPM error
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Friday 19 December 2003 06:38 pm, H.J.Bathoorn wrote: On Friday 19 December 2003 23:24, Lance Benton wrote: Well, looks like I'm going to give up again.. I hate going back to snip my last email showed up as being from [EMAIL PROTECTED], I hadn't properly configured my webmail client to show my name, so it defaulted to just my email address. Sorry for any confusion that caused. very frustrated at how long I've been at this with no results, sorry if this is all messed up or out of format. I'm sorry you're frustrated..but if you want help you will have to ask for it. Up to now I couldn't find anything you've asked about your problems excepting something about a proprietary source RPM you were trying to build. So be more explicit about what you're trying to do and what's stopping you to do that. That way we can help. Feel free to go back to M$ if it bugs you that you have to learn to handle another OS because learning is what it's all about in the early stages. If you're not prepared to do that: Come back when you are. You yourself stated an nforce chip is fairly current and there must thousands of linux users with the same hardware with no trouble at all, so the probability that you yourself are the source of all the mishaps that are befalling you, is pretty high. Just ask. BTW- Please turn off the reply to in your mail to the list it's unnecessary PIA, henceforth: UPIA;) Good luck, HarM I understand the frustration Lance. I was using M$ win 98 up until sept 2003 and have only used it now to play some games. When I installed 9.1 I think I hosed the install 10+ times in the 1st 3 weeks and I almost gave up. Although I realized I wasn't prepared enough, so I googled for any how-to on bash, man pages, specific commands, and any linux how-to .. I lurk this list cooker mostly, but someone here recommended 2 O'Reilly books, Linux in a Nutshell and Running Linux. I received Linux in a Nutshell first, so I started there. It wasn't until I read Running Linux where I started hearing myself say, aah..thats what they meant, this book sheds a lot of light on where it all started and how it works together. I still refer to these references all to often. Linux in a Nutshell has a ton of commands options and switches which has helped me. I highly recommend these. And rpm -rebuild has been separated into its own package: (unless I wrong, but I did a man rpm and didn't see the --rebuild option) rpm-build-4.2-22.1.92mdk I also updated to these, for security , IIRC and you will need the -devel to build from src rpm-4.2-22.1.92mdk rpm-devel-4.2-22.1.92mdk And you will need the kernel source as HarM said. http://rpms.mandrakeclub.com/rpms/mandrake/9.2/i586/Mandrake/RPMS/KByName.html here is also a beginning for rpm how-to http://www.mandrakeuser.org/docs/basics/brpm.html I too, am preparing to get nVidia drivers installed on 9.2, I failed once already, so Ive been googling for anything else I might encounter. Heres 1 site to look into, haven't had time to peruse it as yet : http://www.nvnews.net HTH - -- RickS Linux user #338463 -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.3 (GNU/Linux) iD8DBQE/46b/c8FpDuUpLEERAiTaAJwN9YICp0hrj9Uh6VlUsDQGP4IKbwCgklYI xzzp185TcQC29pnveQ45qPs= =BUjI -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] Output of 'ls' in cl on /dev
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 ls output of /dev crw-r-1 root root 1, 1 Dec 31 1969 mem I know d means directory and l is sym link but What does the c mean core something ??? RickS - -- Registered Linux user #338463. -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.3 (GNU/Linux) iD8DBQE/0tt/c8FpDuUpLEERAlN4AJwNKT6mO/GX6a+ELLHXz+cfI0UBigCgjguA a1zi8E/BXy+S9QLbZPhzsJI= =2/45 -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Sound and video
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Saturday 06 December 2003 02:38 am, Teilhard Knight wrote: Actually my questions are dumb questions. First: is there a master volume control in Mandrake 9.2? I can only hear sound when the amplifier of my home theatre is at its maximum. Second, I want to install the NVIDIA drivers, and there are the IA32, and the AMD64, both supporting my Geoforce3 (Platinum) card. My processor is an Athlon 1.4 Ghz. I reckon the 32 and 64 refer to a 32 bit OS and a 64 bit OS respectively, but I am in doubt about the AMD bit which might refer to the processor. Thanks for allowing me to dumb-ask. Teilhard IA32 or IA64 are Intel architecture 32 and 64 bit AMD64 is well ..you guessed it .. for your AMD Athlon 1.4, so download the AMD64 driver and make sure you look at the readme file 1st. I have an Intel and I rushed thru it to get it working and ended up mangling it. So prepare yourself. You have any more questions post them. Good Luck RickS - -- Registered Linux user #338463. http://counter.li.org/ -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.3 (GNU/Linux) iD8DBQE/0Oktc8FpDuUpLEERAg0CAKCbKoza4NjaqclZMmHaK8kP3kd0SwCfWSQN WsoPOotBgqpaYoExZsr5hMg= =hmyf -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie]Trouble playing DvD's in 9.2
I just recently upgraded to 9.2 from 9.1 and for the most part everything worked fine the one thing that doesn't seem to is playing DVD's. I use mplayer as my movie play and when I try to play a DvD the screen is garbled and it runs slow. But the thing is when I had 9.1 installed I was able to play DVD's without any problems. Has anyone else experienced this or give me any advice on the problem. Thanks. Your faithful linux user: Justin Ricks [EMAIL PROTECTED] _ MSN 8 with e-mail virus protection service: 2 months FREE* http://join.msn.com/?page=features/virus Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] vfat file systems only accessible by root in MDK9.2
Greetings I just recently installed MDK 9.2 and I am only able to access my vfat partitions with my root account. I use to have 9.1 and I never had any problems with this. I tried chmod, chown, chgrp and they seem to have no effect on mounted drives. Does any one have any suggestions. _ MSN 8 with e-mail virus protection service: 2 months FREE* http://join.msn.com/?page=features/virus Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
RE: [newbie] vfat file systems only accessible by root in MDK9.2
When I installed it I used the setting high From: Tony S. Sykes [EMAIL PROTECTED] Reply-To: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Subject: RE: [newbie] vfat file systems only accessible by root in MDK9.2 Date: Thu, 2 Oct 2003 16:47:16 +0100 What security settings did you choose when you installed? -Original Message- From: Justin Ricks [mailto:[EMAIL PROTECTED] Sent: Thursday, October 02, 2003 4:21 PM To: [EMAIL PROTECTED] Subject: [newbie] vfat file systems only accessible by root in MDK9.2 Greetings I just recently installed MDK 9.2 and I am only able to access my vfat partitions with my root account. I use to have 9.1 and I never had any problems with this. I tried chmod, chown, chgrp and they seem to have no effect on mounted drives. Does any one have any suggestions. _ MSN 8 with e-mail virus protection service: 2 months FREE* http://join.msn.com/?page=features/virus -+-+-+-+-+-+-+- Business Computer Projects - Disclaimer -+-+-+-+-+-+-+- This message, and any associated attachment is confidential. If you have received it in error, please delete it from your system, do not use or disclose the information in any way, and notify either Tony S. Sykes or the postmaster mailto:[EMAIL PROTECTED] immediately. The contents of this message may contain personal views which are not necessarily the views of Business Computer Projects Ltd., unless specifically stated. Whilst every effort has been made to ensure that emails and their attachments are virus free, it is the responsibility of the recipient(s) to verify the integrity of such emails. Business Computer Projects Ltd BCP House 151 Charles Street Stockport Cheshire SK1 3JY Tel: +44 (0)161 355-3000 Fax: +44 (0)161 355-3001 Web: http://www.bcpsoftware.com http://www.bcpsoftware.com/ Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com _ Tired of spam? Get advanced junk mail protection with MSN 8. http://join.msn.com/?page=features/junkmail Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
