means that if we wanted EF or DSCP 46 mapped to COS
value 5 we would need to change the cos-dscp mapping to match that. I
hope I didn't confuse you even more. The QoS section of the 3750
Configuration Guide is a great help.
Amp
Quoting CCIEing aboaz...@gmail.com:
HI All,
I am really
Hey Gang,
Question for you guys. It appears that the Cisco VPN Client is not
compatible with this version of OSX. Can anyone point me in the right
direction of some documentation that explains how to setup the Mac OSX
Native VPN Client for use with Proctor Labs?
Thanks a million,
Amp
Hey Bill,
Thanks a million sir. I would normally use Fusion and Windows but I
have had my HD replaced (2) times this year from Fusion deciding to
screw me over.
Thanks,
Amp
Quoting Bill Lake whl...@gmail.com:
Hello Amp,
I got it working with the native client.
You have to setup a new
Jason,
That is awesome news!!! Congratulations on getting it done
Amp
Quoting Jason Lee jas7...@gmail.com:
All,
I'm pleased to let everyone know that I got my numbers! I am CCIE # 38487.
It's been a very long road. For me, my pursuit of the CCIE lasted a little
over 2 years. I used
Hey,
I would hard code the preferences. Being that the default preference
in canonical terms is 0, you could set the preference on the pub dial
peer to preference 1, or you could set the sub dial-peer to preference
1 and the pub to preference 2. Either way, I would hard code it.
Amp
Hey Jason,
After dueling with this lab a few times now, I am a fan of anything that saves
time without causing problems or more work later. With that said, I do not see
a problem with that strategy.
Sent from the most awesome iPhone EVER!
On Feb 28, 2013, at 7:27 PM, Jason Lee
Hey Michael,
Have you checked to make sure that DHCP snooping is not turned on on
the switch, as well as, check and make sure your operational vlan is
being allowed on the trunk.
Thanks,
Amp
Quoting Michael Davis michaeldavis1...@yahoo.com:
Scenario for campus intrasture problem
, who you are! You are Steffen Bruening. NO, I don't know
you but YOU know YOU. Your family and friends know you and I am sure
they know, as well as you know, that YOU CAN DO THIS.
10. Dust yourself off and get back to it!
Amp
Quoting Steffen Bruening stbruen...@gmail.com:
Hi all,
I
Oh yeah I forgot to answer one of the questions. Yes I have changed my
strategy since my previous (2) attempts.
Here is what I am practicing:
After infrastructure is configured and working, go ahead and get QoS
out of the way. No need to have that ugly monster bite me in my ass
later in
Ok seriously, my last post, I promise, maybe. I took the liberty of
reaching out to a friend of mine at IPexpert to see if he can help
you. Call IPexpert and ask for Phillip. Tell him that Deluxe sent you.
Long story about the name so don't ask.
Amp out!
Quoting Steffen Bruening stbruen
Steffen,
You're correct there is no spanning-tree portfast trunk for the ESW
but what you can do with regards to the ESW is enter the command no
spanning-tree vlan 301 or whatever your voice-vlan number is and
still meet the requirement.
Amp
Quoting Cory Gray corygray22...@hotmail.com
Hey Brandon,
The only time I have seen weird issues when using ProctorLabs vRacks
is if I don't do a 'Revert Entire Pod' BEFORE loading the lab config
that I want to work with.
Amp
Quoting Brandon brana...@yahoo.com:
I've completed a few labs and did a search on this topic but didn't
Jason,
Congrats; well done and well deserved!
Amp,
Quoting Jason Murray murr...@usa.com:
Hello everyone just wanted to send a note out that I have passed my
CCIE last week #36408!! First and foremost I want to thank God for
the ability to retain as much information as I had to take
a
perfect 0 and 2 against the lab. I didn't make it this time. Back to
the drawing board.
Amp
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
be
fine.
Thanks,
Amp
Quoting Chrysostomos Christofi ch.christ...@logicom.net:
Hi to all
First I would like to say many thanks to all of you for the great
community that you have here
Since I am new with ccie voice lab preparation and now I joined your
community , I was wondering if it?s
CONGRATS ON PASSING DAN!!! You have been a tremendous help to the
forum and community.
Amp
Quoting Dan Quinlan (daquinla) daqui...@cisco.com:
All,
I passed my Voice exam on Monday. Thanks to everyone on this list
who assisted me in my studies. I'm happy to continue to help others
who
-and-Confidentiality-Agreement_v16.pdf
and
http://www.cisco.com/web/learning/le3/ccie/exam/violation_rules.html
Amp
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE
Whew, that is great news, thanks Vik. I hope to be finished on August 27, 2012.
Sent from an awesome iPad!
On Jun 10, 2012, at 3:23 PM, Vik Malhi vma...@ipexpert.com wrote:
The message from CIsco Live is
Dont expect an announcement any time soon re: the blueprint change for
CCIE-V.
Hmmm is class of restriction correct?
Sent from an awesome iPad!
On Jun 9, 2012, at 3:04 PM, Randall Crumm rrcr...@yahoo.com wrote:
Hi,
I am starting up again.
I am trying to leave a message for branch 2 user. Branch 2 has CUE.
I configured CTI PR, CTI ports,VM pilot,applied VM pilot
Hey Ashwani,
Have you checked this out yet?
http://www.cisco.com/en/US/docs/voice_ip_comm/connection/7x/integration/cucme_sip/guide/cucintcucmesip.html
Amp
Quoting Ashwani ash_r...@hotmail.com:
Hello Experts,
Does anyone knows if SIP Phones MWI works when we have CUCME integration
investment for you.
Hope that helps,
Amp
Quoting Graham Newberry gnewbe...@absnt.com:
Are there any suggestions for which labs to repeat in Volume 2? I am going
to finish all 10 once, but will not have time to go through them all again.
From other's experience, are there 2 or 3
is connected to something; what
is that something? I rented some time this morning from Proctorlabs and tried
to figure this out on my own but I have run into a big wall.
Amp
Sent from an awesome iPad!
___
For more information regarding industry leading CCIE
.
Amp
Quoting cciev wannabe cciev.wann...@gmail.com:
Ok, while I am awaiting help from you, here is my own thoughts on LAB.
I will try no to violate NDA, I want to share some of my experiences.
1. device-by-device or question-by-question approach
It depends. For example, device approach is better
will have access to the configuration files. Copy the initial lab
configs for whatever lab you are working on, and paste them into the
respective devices.
Amp
___
For more information regarding industry leading CCIE Lab training, please visit
Evandro,
Congrats on passing your written. To answer your question, yes without
question IPexpert has the best voice material on the market. Contact
Mike Down - md...@ipexpert.com or +1.810.326.1444, ext. 206. Tell him
Amp sent ya!
Best wishes to you..
Quoting Evandro Nunes evandrog.nu
write out the steps to configure what's being asked. Do this without
looking it up and see where you are coming up short. I know I didn't
directly answer your question but I hope that helps.
Amp
Quoting Pithog Oil pithog...@yahoo.com:
Please i will like to know if my speed is okay and good
Hey Gang,
Can anyone tell me if the Extended Stay Deluxe - Polaris is in walking
distance to the IPexpert training facility?
Thanks,
Amp
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Hey Tyson,
Will that discount code be in effect before the boot camp starts next week?
Amp
Quoting Tyson Scott tyson.sc...@advtechracks.com:
I recommend the Fairfield Inn and suites on worthington rd. We are in
the process of negotiations with them. Will have a discount code soon
with them
Awesome. So the party will be in Marko's room, woo hoo!!!
Quoting Marko Milivojevic mar...@ipexpert.com:
On Thu, Sep 16, 2010 at 15:54, Amp amccar...@cciequest.com wrote:
Hey Gang,
Anyone out here planning on attending the upcoming boot camp in Columbus
I'll be in the room next-door
Hey Gang,
Anyone out here planning on attending the upcoming boot camp in
Columbus with Amy?
Regards,
Amp
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
I think I'm going to go to the doctor and just yell, Ouch!. Hahaha
naa all joking aside, I know what you mean.
Quoting Sam Park upperlevelpark...@gmail.com:
This is like one of those instances when a person's mind is so fried that
only the basic primal pleas escape from a person's lips. In
to
find it is a good thing just in case.
Amp
Quoting Matthew Berry ciscovoiceg...@gmail.com:
I know the QoS SRND is available through cisco.com/go/design, but I
am trying to find it from the
http://www.cisco.com/cisco/web/psa/default.html web page.
Does anyone know the location
I live here in the RTP area but have decided to take the lab in San
Jose. Here are my reasons:
1. Later Start Time
2. Longer Lunch
3. Better Weather
4. Just have a gut feeling about SJC
Amp
Quoting Jeff Garvas j...@cia.net:
I heard that the West coast facility starts later, so someone east
No not based on lunch. With the longer lunch time I will be able to
have some time to think about what I have completed, what I need to
complete, and if I need to change anything that I have done.
Quoting ccie voice cci...@gmail.com:
@Amp
So you choose a lab location based on lunch
Hey Bro,
I ran into an issue similar to that before but mine was because there
was no phone connected to the port.
Antonio
Quoting Matthew Berry ciscovoiceg...@gmail.com:
I see this issue from time to time. The VLAN interfaces on my BR1-RTR
show a state of up, but line protocol is down.
Thanks for that info Amy. I found a link that should be helpful.
http://www.cisco.com/en/US/products/sw/voicesw/ps5520/products_tech_note09186a008067cb94.shtml
Amp
Quoting Amy Ryan ar...@ipexpert.com:
Hello Sergio,
Thank you for bringing to our attention that the solution was missing
Anupam,
I do not recall seeing that '+ Dialing' was supported in CME when I
read through the CME SRND.
Amp
Quoting anupam TYAGI anuf...@gmail.com:
Does cme version 7.0 support + sign. i can see in the isdn debug that the
calling number is coming with + , but on the missed or received call
Matthew,
You are correct, a voice translation rule appending the + sign will do it.
Amp
Quoting Matthew Berry ciscovoiceg...@gmail.com:
Wouldn't it depending on what protocol you were using on the CUCME
side? For example, H.323 does not support the + character. Therefore,
you'd need
that QSIG would be probable. Later dude...
Amp
Quoting Berry, Matthew J. mjbe...@krollontrack.com:
I don't know much about QSIG, so pardon the simple minded question:
Could QSIG be on the lab and, if so, in what ways could we see it
manifest?
Thanks!
- Sent from my Blackberry
Hey Dew,
The current version of the lab is v3 so you should roll with that.
Quoting Dew Swen dew.s...@gmail.com:
Hi there,
I will write my written test in a month. After that I will start to the
workbooks.
Which version do you offer me to begin? I have enough time (one year). First
Hey Roger,
I am all signed up and ready to go, just need to make hotel
arrangements. I was actually asking who will be attending the boot
camp because I wanted to see if anyone wanted to share the hotel
expense costs.
Amp
Quoting Roger Källberg roger.kallb...@cygate.se:
Hi Amp,
I plan
Hey gang,
I was wondering has registered for or is planning to register for the
boot camp in San Jose from March 15 - 26?
Amp
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Hey Randall,
I had the same problem that you have but I was able to resolve the
issue by not only setting the duplex setting in Adobe Reader but in
the settings of the printer as well. Hope that helps...
Amp
Quoting Randall Crumm randall.cr...@harmonicinc.com:
HI,
Is it me or can you
Hey Jeffery,
See if one of these links has what you're looking for.
http://docwiki.cisco.com/wiki/Cisco_Unified_Presence%2C_Release_7.x
http://docwiki.cisco.com/wiki/Cisco_Unified_Presence,_Release_7.x_--_Configuration_and_Maintenance_of_Cisco_Unified_Presence
Amp
When replying, please edit your Subject line so it is more specific
than Re: Contents of CCIE_Voice digest...
Today's Topics:
1. Re: CCIE_Voice Digest, Vol 46, Issue 134 (Wayne Lawson)
2. Re: CCIE_Voice Digest, Vol 46, Issue 134 (Amp)
3. Re: CCIE_Voice Digest, Vol 46, Issue 134
I remember when I first started using PL sessions I had some problems
and was asked by one of the support guys if I had tried to get any
help on the forum first before contacting them.
Quoting CCIETalk.com cciet...@gmail.com:
Well you have to see his point of view. He has been telling all
with you not wanting the quality
or integrity of this list to take a downward spiral. Anyway, whatever
you are paying Drew and Ryan probably isn't enough for all the
problems that these two have to sort through.
Quoting Wayne Lawson groupst...@ipexpert.com:
Amp -
They were possibly
Hey Gang,
I was wondering has these started shipping yet and if so, how much for
current customers?
Volume 1 (CCIE Voice 3.0) Walk-Through Video Tutorials
Shipping Status: This new product is not expected to ship until
December 20th, 2009.
Amp
: +1.810.454.0130
Mailto: vma...@ipexpert.com
Join IPexpert's Free CCIE Peer Groups Study Communities at
www.IPexpert.com/communities
On Dec 25, 2009, at 9:10 PM, Amp amccar...@cciequest.com wrote:
Hey Gang,
I was wondering has these started shipping yet and if so, how much for
current customers
CCIETALK,
Great points and I am sure that IPExpert appreciates your patience
however what about the group of people that are unable to access their
workbooks and have lab dates coming up soon and would really like to
access their workbooks to continue with their prep? The original word
I ran into that problem when I was working on Lab1A in the vol. 1 WB
and what I did was reset the phone from the CUCME router. Another
thing you can do is shut down port Fa0/3/0, clear IP dhcp binding, and
remove/re-add the config.
Quoting Gobind Singh Gill gob...@me.com:
Hi Guys!
I
I know this may seem like an idiotic question but I made the idiotic
mistake last week so here goes, did you load the 'inital config'
scripts from the vRack GUI?
Quoting Sprengers, Harry harry.spreng...@getronics.com:
Hello,
when working on pod 19 voice vrack at protorlabs, I don't see any
Congratulations Dan...
Quoting Daniel Rodriguez drodrig...@fidelus.com:
Folks:
Just wanted to thank a few people here for helping me with some of
my questions over the past few weeks... and a huge thanks to
IPExpert for the very helpful bootcamp and practice lab material.
- Dan
this for you and what's most important to or
for you. Stay strong and if you wanna holla one on one email me.
Amp
Quoting Nara Shikamaru shikam...@kagadis.com:
I've been working through my studies for about a year now, my lab date is
set for probably February, and I have to say that overall
Hey gang,
I was wondering who, if anyone, is going to the boot camp in San Jose
from October 19 - 30?
Amp
Hey Gang,
I am having some trouble with getting the Br2 SCCP phone to register
after I go through the telephony-service setup and configure
everything according to section 1.8 of Lab1A. A debug ephone register
doesn't return anything. I have reset and restarted the phone to no
success.
: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Amp
Sent: Friday, 19 June 2009 8:49 AM
To: CCIE-Voice
Subject: [OSL | CCIE_Voice] Need Help, SCCP Ephone Will Not Register
Hey Gang,
I am having some trouble with getting the Br2 SCCP phone to register
after
CME phones won't register without time zone setup.
Enter following under telephone service
time-zone 48
time-format 24
date-format dd-mm-yy
-Original Message-
From: Amp [mailto:amccar...@cciequest.com]
Sent: Friday, 19 June 2009 9:08 AM
To: Aamir Panjwani
Cc: CCIE-Voice
Subject: RE
are trying to get register there?
Cheers
Sent from my iPhone
On Jun 18, 2009, at 4:32 PM, Amp amccar...@cciequest.com wrote:
Hey,
Aamir, yes I changed the max-ephones and max-dn to a higher value
and reset the phone, no change when I did that.
Ccie1d0t, I recreated the cnf file and nope no change
10.10.202.1 - 10.10.202.254 1
BR2-RTR#
Quoting Bill Talley bill.tal...@aos5.com:
What has the .50 ip address?
Sent from a mobile phone with very tiny touchscreen keys. Please
excuse my typos.
-Original Message-
From: Amp amccar...@cciequest.com
Sent: Thursday, June
Hey Mark or Vik,
Do either one of you have any advice or input that you can give me on this?
Quoting Amp amccar...@cciequest.com:
Hey Bill,
Nothing has the .50 address, I have tried to get the phone to drop the
.51 address to see if it would pick up the .50 but it is a stubborn lil
thing
Bill,
I believe it is, I have not been able to find any information to say
otherwise.
Quoting Bill Talley bill.tal...@aos5.com:
Is 'load 7960-7940 P003-08-9-00' valid for a sccp device?
-Original Message-
From: Amp [mailto:amccar...@cciequest.com]
Sent: Thursday, June 18, 2009 7:04
so.
Larry Hadrava
CCIE #12203 CCNP CCNA
Sr. Support Engineer – IPexpert, Inc.
URL: http://www.IPexpert.com
On Thu, Jun 18, 2009 at 8:21 PM, Amp amccar...@cciequest.com wrote:
Hey Mark or Vik,
Do either one of you have any advice or input that you can give me on this?
Quoting Amp amccar
can try shifting it back. Sometimes things just won't come up
on the loopback for some reason.
--
From: Cliff McGlamry cl...@mcglamry.net
Sent: Thursday, June 18, 2009 9:43 PM
To: Amp amccar...@cciequest.com; Larry Hadrava lar...@ipexpert.com
Cc: ms
on the router It
will never come up that way!!!
--
From: Amp amccar...@cciequest.com
Sent: Thursday, June 18, 2009 10:22 PM
To: Cliff McGlamry cl...@mcglamry.net
Cc: Larry Hadrava lar...@ipexpert.com; ms...@ipexpert.com;
CCIE-Voice ccie_voice
files update complete for phonetype(7960)
BR2-RTR(config-telephony)#
Quoting bkvalent...@gmail.com:
Amp,
The load command under telephony-service needs to point at a file
that ends with the .loads extension that is being served via the
tftp-server command.
Brian
Sent via BlackBerry from
on the Proctor Labs -vRack Control page I am
unable to connect to the server. Any suggestions, pointers, life line,
or something that can help me save this session?
Thanks,
Amp
FYI, the problem is resolved. It was a DHCP pool conflict. I'm rocking
and rolling now. Big thanks to James Key!!!
Amp
Quoting Vik Malhi vma...@ipexpert.com:
Can you ping the pub from your computer? Try manually browsing to
http://10.10.210.10
--
Vik Malhi CCIE #13890, CCSI #31584
Senior
concerns using my hardware 7960 IP phones. Is
this the correct physical layout:
3550 == to the F0/1 of the 2611XM (via straight-thru) and 7960 ==
3550 (via straight-thru).
Do I have this setup correctly?
Thanks,
Amp
Hey gang I was wondering, is it possible to use a 1760-v router as a
gatekeeper? I have a 2611XM, a 3640, and two 1760-v routers and I am
trying to figure out what limitations (if any) I'll have with these
routers as I try to simulate the IPexpert lab topology. Thanks a
million.
Amp
, other than pressing help on the Sub or Pub, that will
explain each service?
Thanks,
Amp
Hey gang, I have a quick question for anyone out here who may have
experienced this on their CCIE journey. I just wanted to ask for some
advice. What is the best way to maximize the use of the BLS, as well
as, what's the best way
(in your opinion) to bounce back from an extended period of
Joel,
Where exactly do you live and what times do you plan on studying?
Amp
?
Amp
Quoting Larry Hadrava lar...@ipexpert.com:
Amp:
Here is a post that I made on my blog about this very subject.
I had a long lapse since passing the RS lab ( 2003 ) and late last year
starting to study for the Voice IE. I hope that the comments help.
I have now completed going through the BLS
If you have a CCO account, you can go to Cisco Marketplace and order
the NFR kit; I believe it is $275 USD.
Quoting Padmanabhan, Padhu pa...@ti.com:
How did you get nfr kit ? Through cisco am ?
--
Sent using BlackBerry
- Original Message -
From:
I am scheduled for November 13, 2009 here in RTP.
Quoting Kirchhof Björn bkirch...@bvg-systems.com:
Hi,
is there anybody who is planning to take the new lab?
I've scheduled my first try for November.
Regards.
Bjoern
I was wondering if labs 4a and 4b were the latest labs released for
the 3.0 track? Thanks.
/support/index.html). I am just now starting out on this journey as well, so I by no means have all the answers, but these are the documents that I am either reading or have downloaded to
read.
HTH,
Amp
Quoting Shai Loufton osl_vo...@shai-l.com:
Hi again,
I have received a few emails answering
78 matches
Mail list logo
