Re: Advanced PIX Beta Exam - Free

Here is the link for everything that is on the test. Seriously, I took it about 3 weeks ago and it is straight out of the manual, even the pictures! It runs the whole gambit of what hardware is this and which way the interfaces are numbered to configuration and even into all of the Crypto stuff...

RE: Spanning tree screw up

i had a similar problem with a cat 5500 the problem was a encapsulation mismatch on a trunk. Correct the mismatch and the messagge go away (but for me wasn't occasionally but every 5 seconds) hope this help Stefano > -Original Message- > From: alex campbell [mailto:[EMAIL PROTECTED]] >

RE: A question about IPSec

from http://www.isi.edu/in-notes/iana/assignments/protocol-numbers PROTOCOL NUMBERS In the Internet Protocol version 4 (IPv4) [RFC791] there is a field, called "Protocol", to identify the next level protocol. This is an 8 bit field. In Internet Protocol version 6 (IPv6) [RFC1883] this field i

Token Ring Problem

Can I connect Token Ring Interface on my router directly to LAM Port?? I have tried it but it shows down/down status on the router. Initially I tried it by putting a TR hub b/w Router & LAM. And it worked fine. Is there any issue connecting Router directly to LAM Port? ___

Advanced PIX Beta Exam - Free

Hello guys, Can anyone help me with whitepapers, websites on Advanced PIX Beta Exam (exam code 9E1-571). You can register for this exam. Last date for this exam is 13th Sept. Enjoy but hurry and do not forget to email me the important sites on PIX. Thanks... ___

Qos

Can anyone tell me what routers or catalyst support QoS Daley Okuwa EDS Network services Stockley Park Tel no 0208 -5353144 fax no 0208-7544057 ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: ht

Re: 2980 vs 3500

20 seconds spent searching at www.cisco.com yielded the following results: http://www.cisco.com/univercd/cc/td/doc/pcat/ca2980g.htm Look under Key Features, you'll find what you're looking for. Following proper list etiquette, you should always search for the answer yourself before posting to t

Re: A question about IPSec

Hi George, Hi Group, The protovol-number is a 8-bit field in the IP-Header and defines the Protocol that the packet encapsulated in the ip-header uses. Common Protocol Numbers: 1 ICMP 6 TCP 17 UDP 88 IGRP 89 OSPF You can find the complete reference at http://www.isi.edu/in-notes/iana/assignme

Protocol Numbers (was "IPSec")

Here's what's going on: When IP receives a packet (coming up from ethernet or whatever L2 is), it doesn't look at the port number to see where to go next. It looks at the Protocol Number, which indicates which process is next up the OSI model. For example, ICMP is protocol number 1, TCP is n

Re: BGP on Cisco 1601 with 12.0(3)T IOS

Hi Yes, you will need an advanced (e.g. enterprise+) image. I can not say for sure, so you will have to do the research if a advanced image on a 1600 will even support BGP. HTH -- John Hardman, CCNP MCSE+I ""Hans Stout"" <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROT

Re: visio template for Cisco equipment

Fine if you have a CCO acount, otherwise not very usefull. Neil ""McCallum, Robert"" <[EMAIL PROTECTED]> wrote in message news:[EMAIL PROTECTED] .uk... > Once again, > > http://www.cisco.com/partner/visio/ > > -Original Message- > From: Mike Dang [mailto:[EMAIL PROTECTED]] > Sent: 31 Au

Re: memory in 4500

Hi No "regular" 72 pin SIMMs will not work, you will need parity memory. I picked up 2 16MB parity from Accessmicro for about $100 with shipping, works great. As for flash any flash from a 2500, 2600, 4x00 will work. If you need new flash check the archive, there is a site memoryx.com, I think I

RE: visio template for Cisco equipment

Once again, http://www.cisco.com/partner/visio/ -Original Message- From: Mike Dang [mailto:[EMAIL PROTECTED]] Sent: 31 August 2000 15:29 To: [EMAIL PROTECTED] Subject: visio template for Cisco equipment Hi group, I'm using Visio to draw a network topology and just wondering that if an

Re: A question about IPSec

>From the IANA: "In the Internet Protocol (IP) [DDN], [RFC791] there is a field, called Protocol, to identify the next level protocol. This is an 8 bit field." Look here: http://www.isi.edu/in-notes/iana/assignments/protocol-numbers for all the gory details... Dale [=`) >From: George Zha

2980 vs 3500

Hi experts, I am going to use cisco catalyst 2980G instead of stack of 3548s and 3524s. I was warned that 2980G don't support QoS which 3500 series do. Is that true? It is very appreciated if you can point out what I will lose and what I will gain by using 2980G compared with 3500 series. Thanks

Voip - New QOS features needed

Hi, Could someone please give a reference where I could find the new QOS features for VOIP. I'm working with the 12.0(7)T IOS version. Tank in advance, Jônatas Lima de Amorim _ Get Your Private, Free E-mail from

RE: A question about IPSec

Are they not the port numbers? -Original Message- From: George Zhang Sent: 31 August 2000 15:33 To: [EMAIL PROTECTED] Subject:A question about IPSec I read the following form

RE: Can't connect to a Cisco/Grand Junction 2800 Switch via serial

Group - At last a question I can answer! You can 1.) Build a custom db9 adapter that raises CD toward the 2800 and does the null-modem functions, or 2.) force an arp entry into a router on the same Ethernet segment. To get access I used method #2 which is described in the attached text file. Later

A question about IPSec

I read the following form Cisco documentation about IPSec: "IKE uses UDP port 500. The IPSec ESP and AH protocols use PROTOCOL numbers 50 and 51. Ensure that your access-list are configured so that 50, 51 and UDP port 500 traffic is not blocked ..." My question is, what are the PROTOCOL number

visio template for Cisco equipment

Hi group, I'm using Visio to draw a network topology and just wondering that if anyone knows where I could find .vsd files for Cisco equipment? And how much it would cost? Thanks in advance, MD __ FREE voicemail, email, and fax...all in one pla

RE: PIX Upgrade from 4.4(1) to 5.1(2)

I'd compare the old 4.4.1 configuration (which you hopefully still have) to current one. I'm planning the same upgrade on ours to get VPN capability, so I'm kind of interested in the problem. Chuck Church CCNP, MCNE, MCSE Sr. Network Engineer Magnacom Technologies 140 N. Rt. 303 Valley Cottage,

auto dial on Cisco 1600?

What is the command to type in to check whether my router is set to dial in on demand or whether it is set to dial to my ISP every x amount of time? It is a Cisco 1600 series ISDN router. Thanks, David ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list

Re: Exam 350-001, I'm so pissed!

>From the archives: a.. Subject: Re: CCIE Writen Failed again b.. From: Krazikat c.. Date: Thu, 29 Jun 2000 00:48:12 -0400 d.. Newsgroups: groupstudy.cisco e.. Organization: Arteck f.. References: <8iob5a$ik6$[EMAIL PROTECTED]> ---

What are the differences between ISDN PRI over R2??

Hi All, What are the major differences between ISDN PRI signaling over R2 on a E1 packet voice network module? What are the benifts I will get if I use ISDN PRI instead of R2. Thanks, Iqbal ___ Say Bye to Slow Internet! http://www.home.com

RE: Collisions on Ethernet Lan

There are too many unknown values to say that .01% collision rate or 10% collision rate is "unacceptable". What is the distance between the switch and the workstation, what is the average packet size, what is the utilization level of the line . Cisco may state that .01% is correct and that

Re: BCSN - OSPF

Title: BCSN - OSPF If it is mentioned in the objectives you better know it very well. Consult CCO and be familiar with all of the OSPF-related commands and case studies. Don't shortchange your acquisition of knowledge just for the sake of passing an exam.   MLC "Henson, Luke" <[EMAIL PROTE

RE: How can I get rid of broadcast storm?

> I understand that since we are cloning machines over the network from ( #.#.20.#)subnet to different subnet where all the workstations are located, this traffic has to go through a router. We are using Cat 5500. > Run a sniffer on your network for about 30 minutes and isolate the source

Cisco Secure VPN Beta Exam

Hello Friends Has anyone on this list taken the Cisco Secure VPN BETA exam. I am not asking anyone to break the NDA... just need some study tips and if possible a break up of the topics on the exam. Would really appreciate it Thanks SV ___ UPDATED Posting Guide

RE: Collisions on Ethernet Lan

You are correct!! Look at the Cisco Internetworking Troubleshooting Handbook pg 78. -Original Message- From: Atif Awan [mailto:[EMAIL PROTECTED]] Sent: Wednesday, August 30, 2000 11:30 PM To: [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Subject: RE: Collisions on Ethernet Lan Everyone here

Re: list of promiscuous nic cards? - off topic

Beth, If you look on AG Groups site: http://www.aggroup.com/support/hardware/epw they have a list of promiscuous cards that they have tested with EtherPeek. This may help, but not sure how the cards listed would work with other packet sniffers. Thanks, Neil Loffhagen email: [EMAIL PROTECTED] w

Re: CCO

You don't have to read everything on the CD, because we all know that would take forever, plus some of it is crap!!! What you do want to do is familarize yourself with the layout of the CD. Your goal should be to be able to find what you are looking for on the CD in less than 30 seconds. As Cas

RE: Trace route Source Address

Well, Not really. The two scenarios below always come up and I think I know the answer, I am not 100% sure. the basic questions is what does trace route use as he source address when you telnet to a router and also when you just do the trace route from the local PC. This would useful to know i

Re: CCIE WRITTEN ---- the horse has died >>at last so put the whips away

Oh so 2 caps lock on makes 1 caps lock off ? if you want to be picky screaming you point is not polite either .. I think we all understand where both parties are coming from and or going to .. Maybe this thread can just die a nice quiet death now. So lets put the the whips away and lets get ba

Re: Summarization

try this http://www.cisco.com/univercd/cc/td/doc/cisintwk/idg4/nd2003.htm http://www.cisco.com/warp/public/103/eigrp5.html http://www.cisco.com/cpress/cc/td/cpress/design/ospf/on0407.htm http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/ip_c /ipcprt2/1cdrip.htm Oz http://www

RE: Summarization

I recommend this web site that was advertised on the list recently (Hitesh Pathak) as an outstanding document to read on all things IP. Even route aggregation/summarisation. HYPERLINK http://www.3com.com/nsc/501302.html http://www.3com.com/nsc/501302.html Dan Mansfield MCSE, CNE, CLP soon to b

RE: getting rid of broadcast storm on 5500

First thing I would try is to see if you can shut off the unnecessary protocols. Print servers do that a lot too. I had a customer recently who was experiencing poor network performance and I found an Intel print server that was pumping out about 10,000 IPX RIP packets a minute. It wasn't servi

Re: frame relay in BSCN?

""Gabriel Nickel"" <[EMAIL PROTECTED]> wrote in message 005401c0132e$f022a6c0$12e6a8c0@Westend">news:005401c0132e$f022a6c0$12e6a8c0@Westend... as a part of many ospf sample configurations frame relay is used. is a detailed knowledge of frame relay required for BSCN or are the basics sufficient? th

Re: memory in 4500

Well, I know that this isn't exactly the question you asked, but go to www.memoryx.com 32mb Kit Cisco 4500M, 4700, 4700M (2*CS72P16) $106.00 8mb Cisco Approved Flash Simm (CS80FD8) $99.00 HTH, Adam Hickey [EMAIL PROTECTED] - Original Message - From: "denn

Re: Catalist 5005 commands manual needed

TADA 3 minutes must be getting slow (sigh) http://www.cisco.com/univercd/cc/td/doc/product/lan/cat5000/rel_5_5/cmd_ref/ cr_toc.htm Oz http://www.mcseco-op.com/helpfull_links.htm ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list

Spanning tree screw up

hello ppl I have a cat 5500 with 12 ethernet cards and an RSM over the weekend I repatched the whole network and added a couple new vlans...it all seems to work. However this message seems to come up occasionally %MLS-4-RESUMESC:Resume MLS after detecting too many moves %MLS-4-MOVEOVERFLOW:Too m

Re: deep trouble

Talk to the local telco about the type of interface you need. You may need a NT1 between your router's BRI (S/T interface) and the ISDN switch. Will "Ravi Kumar" <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > hi friends > > I am in deep trouble. help required

RE: CCIE WRITTEN ---- Please provide your feedback.

MR DALE IS NOT a REASONABLE INDIVIDUAL BY MAKING THOSE RUDE COMMENTS. This group study is where you share your experience and advice. Pay him no attention. >From: Nadeem Khawaja <[EMAIL PROTECTED]> >Reply-To: Nadeem Khawaja <[EMAIL PROTECTED]> >To: "'Dale Holmes'" <[EMAIL PROTECTED]>, [EMAIL

Re: getting rid of broadcast storm on 5500

One command you may be able to use is: set port broadcast [%] (threshold = 0..15 packets/second or 0-100 percent 0 pps or 100% unlimits broadcast traffic) Just apply it to the port the WANG systems are hanging off. Just a thought ""Dost"" <[EMAIL PROTECTED]> wrote in messag

Re: deferred packets on eth on C7206vxr

Even if I have 2 routers only crossed over on ethernet cable ? Or, should I have full duplex enabled to avoid deferred packets ? Nodir Bosio Stefano wrote: > Deffered packet is normal on a CSMA/CD network like ethernet. > When packet must be trasmitted out on a ethernet interface the carrier a

Summarization

I need to find resources about how to calculate summarized routes. Searching the archives on summarization, CIDR, etc. has not turned up anything. Thanks in advance Brian _ Get Your Private, Free E-mail from MSN Hotmail at h

memory in 4500

Can I use any standard 72-pin memory chip in my cisco 4500 router? I'm wanting to upgrade to 32M and the cisco list price is $2K. How about flash? Are there any generic brands out there that can be put into a cisco device. Thanks, Ray ___ UPDATED Posting Guidel

Re: Connectivity Issues with ping/tracert

Sorry folks, I should have been clearer... I do not wish to compromise my network by giving out real IP addresses I chose 10.x.x.x and 12.x.x.x. only as an example IP address.. David Ristau wrote: > > a web site say 12.0.0.1 sits out on a public network, > > a user across the nation, say in

Off topic: Upgrade from CWSI to Cisco Works 2000

Hello Everybody I'm currently using CWSI 2.1 and planning to buy Cisco Works 2000, Campus 2.4. Is there any upgrade product or should I pay the full product price? If so, can you please provide me with the product number? Thanks ___ UPDATED Posting Guidelines: h

RE: deep trouble

Title: RE: deep trouble You've got line problems.just by specifying the switch-type and plugging in the ISDN you should get layer 1 -Original Message- From: Ravi Kumar [mailto:[EMAIL PROTECTED]] Sent: Thursday, August 31, 2000 7:13 AM To: [EMAIL PROTECTED] Subject: deep troub

Catalist 5005 commands manual needed

Hi all I have been searching for 2 days the commands list for Catalyst 5005 but without any results. Does anybody know the link for this doc ? Thanks in advance Cristian ___ Say Bye to Slow Internet! http://www.home.com/xinbox/signup.htm

Re: BCSN - OSPF

Luke, Imagine being given a routing table and being asked something indirect about it, such as what area type is this router. Possible answers : ASBR, ABR, Stubby, Not-so-stubby etc. This detail isn't given explicitly but needs to be deduced from the routing table you are given. So in a n

VTP Domain Name

Please tell me how to clear the vtp domain name in Catalyst 2924! Vtp domain name isn't set anything first.Then I configured it to Cisco but, I want to back to the initial. I did 'write erase', but vtp domain name wasn't cleared. _/_/_/_/_/__/_/_/_/_/_/_/_/_/_/ Masaru Umetsu E-mail:[EM

deep trouble

hi friends I am in deep trouble. help required I am ravi kumar from HYDERABAD, INDIA i have a 2503 router in my office. recently we got ISDN connection from local basic telephone service provider (DOT) and bought ISDN internet account from local ISP. I want to provide internet access to all my

BCSN - OSPF

Title: BCSN - OSPF Hi, Can anyone tell me how deep the exam goes into OSPF?? Any help much appreciated. Luke

Re: Help about E1

I'm afraid not ! Network Modules for 2600/3600 series were only capable of running Channelized mode. Newer HW code might support controller E1 3/7 channel-group 0 unframed command, but you have to check. Previous versions didn't support this. Regards, Ufuk. ***

Re: icq port number

Yeah it is correct, ICQ 99a uses 4000 as its port to icq.mirabilis.com its main operating server, if you want to block ICQ traffic, trace the roots of its server, means its IP address, you can simply do that by sending the ping request. Then deny traffic to that destination. Because as far I know

RE: Packet drops...

o.k. lets start at the physical layer. What cabling is being used here? Have you tested it to verify that it is o.k.? 2nd. What is the setting of the NIC cards in the servers? Manually set or auto neg. 3rd. What is the setting of the ports on the switch that they are connected to? Manually

Packet drops...

hi.. i have a 2916 to connect to sun E3500 and Aix Machines. the sun hold Oracle databases (not yet live) while Aix runs cobol and wisp(major load is on this). the customer was complaining that the oracle sessions get disconnected intermittenly. i just ran a few ping tests and this reveals

Carrier transitions

Hello colleagues, do you know what causes carrier transitions on a serial interface ? Is it when the serial status changes from up/up to up/down, or when it changes to down/down, or both ? Thanks for your help in advance. Georg Pauwen

No Subject

what is the passing marks for CCNP (all four subjects) _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Share information about yourself, create your own public profile at http://profiles.msn.com.

frame relay in BSCN?

as a part of many ospf sample configurations frame relay is used. is a detailed knowledge of frame relay required for BSCN or are the basics sufficient?  thanks for any input   /gabriel  

Re: Passed CCNA 2.0

how long did you prepare for this exam ? what studying material you used ? KEN> ""Swapnil M Shah"" <[EMAIL PROTECTED]> ? [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > I passed CCNA 2.0 today. > > Thanks group for your support and the timely advises. > > --- > With Best Regards > Swapnil Sh

Re: Help about E1

Thanks for your help. Now I still have some question: I buy a NM-2CE1U for 2600. It said that they are compatible with the International Telecommunication Union Telecommunication Standardization Sector (ITU-T) G.703/G.704 specifications, so i think that it can support G.703( the pure 2M channel?

RE: Practicing DLSw

i made a mistake, with /30 subnet mask you can have max 2 host on network so eth1-R0 10.10.66.1 ethx-R1 10.10.66.2 there isn't space for a PC. so i think you have connected the PC on eth0 on R0 but eth0 don't have an IP address so you can't have IP connectivity on eth0 and you can't ping troug

Re: Help about E1

Hello, First of all, E1 stands for 2Mbps transmission. If your transmited information is carried in a frame ( check ITU G.704 for details ) you can seperate 64Kbps "channels" out of this 2Mbps signal. For example in a TDM infrastructure, you can direct each of these 64K (or better to say n x 6

RE: Help on Frame-relay Traffic-shaping command

yes. you are right but this command exist frame-relay traffic-rate average [peak] not Frame-relay traffic-rate [bit-rate [burst-size][excess-burst-size]] the difference is in the option (the meaning are about the same but the syntax is different). The options "bit-rate [burst-size [excess-burs

BGP on Cisco 1601 with 12.0(3)T IOS

Hello colleagues, I have two Cisco 1601's running IOS version 12.0(3)T on which I try to implement BGP as a routing protocol. When I am in config mode, I can see that BGP is an option, but when I type 'router bgp 10', the system returns 'unknown routing protocol'. Are there any special require

RE: deferred packets on eth on C7206vxr

Deffered packet is normal on a CSMA/CD network like ethernet. When packet must be trasmitted out on a ethernet interface the carrier are sensed if it is busy the interface wait to send (deffer), the deffered packet counter are incremented by 1, after a random time the interface recheck for carrie

How much, where to lease 3 2501's?

I'm thinking of buying leasing a triplet of 2501's. Anyone know where or how much? How and where? ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and N

RE: Practicing DLSw

PING reachability is an IP problem and is not related with DLSw, try disable DLSw config and see that nothing change. if you have reachability between Lo i think tha problem is in PC, check for address and default gateway PC0 must be 10.10.66.2 and 10.10.66.1 attached on R0-Eth1 segment PC5 must

RE: Aux + external ISDN-Modem <-> Bri ?

Well it seems I really have missed a important point (need to study more!). As pointed out bye > From: Moore, C. Rodgers [mailto:[EMAIL PROTECTED]] there's a protocol issue: > Herold, > > The problem your going to have is Async PPP out of the 2515 and sync PPP in > the 3640. The formatting i

RE: break sequence on NT ?

This link gives all the possible key combinations for various OS's & comms software http://www.cisco.com/warp/public/701/61.html HP > -Original Message- > From: Erick B. [SMTP:[EMAIL PROTECTED]] > Sent: Thursday, August 31, 2000 3:33 AM > To: Ajaz Nawaz; [EMAIL PROTECTED] > Subje

Re: bgp path selection

Of course not! p.s: weight then local preference etc. --- Kikpasa <[EMAIL PROTECTED]> wrote: > I hope not, because I can't remember my self > > kerry > > "Yee, Jason" wrote: > > > > hi, > > > > Anyone who has taken the Routing 2.0 exam can tell > me do we need to remember > > the bgp path

RE: Foundation Courses !!!

Title: Foundation Courses !!! from http://www.cisco.com/warp/public/10/wwtraining/certprog/lan/programs/ccnp.html   relevant excerpt:   Why offer two different exam paths for CCDP or CCNP (that is, Foundation Exam alone versus the Routing, Switching, and Remote Access exams)? The material cov

getting rid of broadcast storm on 5500

Hello everyone: We got 2 catalyst 5500 serving 1500 nodes. We got old WANG system which sends all protocol traffic including banyan, netbuie, ipx etc. We experience broadcast storm at least couple times a day and network load hits the sky. I am also certain that it's coming from WANG system and w

Help about E1

There are several E1 standard like Channelized E1, Fractional E1, Full rate E1. What is the different between them? And can i use channelized E1 card to connect Fractional E1, Full rate E1? Thanks. ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/gu

Foundation Courses !!!

Title: Foundation Courses !!! Dear All,    Just a question to ask, What is the foundation R S course for CCNP, What does it consists of, how is it a replacement for two-three ccnp exams and the availability in Prometric centres, also would like to know did anybody of you got his ccnp t

Re: I'd like to thank the academy

It's a standard line in an acceptance speech for someone who wins an Academy Award (Oscar) ""Avran"" <[EMAIL PROTECTED]> wrote in message 8okm7s$k4m$[EMAIL PROTECTED]">news:8okm7s$k4m$[EMAIL PROTECTED]... > Congrats! What academy are you referring to? > > "David Williams" <[EMAIL PROTECTED]> wro

<    1   2