I would like to install new flash ios image but I don't know what to do if
it fails. Can I download ios from tftp without any flash installed?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=8919&t=8919
--
FAQ, list archives, and s
IP routing is by default on when using IRB bridging. The only way to trun
IP routing off is by the command you have done.!
-Original Message-
From: Jerry Seven [mailto:[EMAIL PROTECTED]]
Sent: 18 June 2001 06:19
To: [EMAIL PROTECTED]
Subject: Bridging: "no ip routing" and "no bridge xx r
Are your servers configured with the correct default gateway?
CM
-Original Message-
From: Shane Stockman
To: [EMAIL PROTECTED]
Sent: 17/06/01 20:08
Subject: Static Routing [7:8896]
Hi
I have 3 routers running a point-to-point network.There are 2 branches
and
the 3rd router is at the IS
Dear
How to make a VLAN at my company
my company has 100 PC
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=8921&t=8921
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and
I intend taking my test in a about two weeks. Does the test have any
pointers to the questions i.e. How many answers, choose the best etc.
Percy
_
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
Choose all that apply! Choose the best answer/s.
-Original Message-
From: Perminder Grewal [mailto:[EMAIL PROTECTED]]
Sent: 18 June 2001 10:13
To: [EMAIL PROTECTED]
Subject: CCIE Written [7:8923]
I intend taking my test in a about two weeks. Does the test have any
pointers to the ques
Hi,
After installing the documentation CD, I tried to lunch the CD by running
the "Lunch CD" short cut, but all I get is a blank page. I started it from
the
CD by running the home.htm file on CD2, this works fine but as soon as I
click on a link I get garbage text. I tried to install Netscape nav
I want to buy some books on Voice over ip etc. I have the McQuerry and Keagy
books from cisco press but was wondering if anyone knows of a book that is
based on the CIPT class? Any other books I should purchase?
thanks
stuart
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=8
Hi
You try to zip and copy
That will work
ciscosl
--- kenny wong wrote:
> Hi ,
> Any one try to copy the Cisco CD to your hard disk
> and eventually access
> through the hard disk ?
> Please help
>
> Regards
> ken
[EMAIL PROTECTED]
__
Do You
HI everybody
I am designing a voip network. I want to take ip
traffic throug a leased line put them to the pstn
through pbx.
I am going to use 3640 with vic- E&M card and WIC-2T
to get the leased line.
I am going to use ericosn DM110 as pbx
Will this work or tell me your ideas and sugestions
ci
Hi All
I am in the process of installing Cisco NetSonar 2.0 for my company.
However, as this version of the software is quite old, the Network Security
DataBase (NSDB) is not the latest available with Cisco. I have gone through
the Cisco Website and there is no specific information available on
Hi,
search for the LAUNCHIT.EXE File on the CD
and start it this will open a Browser-Window.
Now it must work. i had the same problem 2 weeks ago.
-Urspr|ngliche Nachricht-
Von: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Gesendet am: Montag, 18. Juni 2001 11:44
An: [EMAIL PROTECTED]
Be
Dear paul,
Hi, being an electrical engineer myself I have to say that I agree with
all the points you made except one. That is the one comparing SAP to
CCIE. If you look into it deeply SAP was a software Cisco is basically a
hardware company. So if some has been a CCIE for a couple of years and
ha
Hi,
how do I set up a router with a dial in modem? Is it just a matter of
plugging in the serial port and connecting to an analogue line or is it way
more complex?
The moden needs to be there so that If it(Router) ever goes down, I can dial
in and bring it back up.
Thanks in advance.
Brian
M
Hi all,
could anybody point out the source of cisco boot strap chips? Can we use
third party chips or do they have to be cisco approved.
Thanks in advance.
Omer
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=8934&t=8934
--
FAQ,
Dear All,
I want to configure Cisco AS5300 to not to
authenticate any dial up user, but at the same time
passes the user account to an external RADIUS server.
Could anyone help me one that.
I appreciate your help and cooperation.
Thanks and best regards
Ashraf
_
Hie..
Well , it more than "plugging" a modem to serial interface and dialin.. You
should check
among other things -
- wether you serial port is async or sync [ you need a physical async port
for for you
to attach your modem]
- you 'll need to configure your router to accept CHAP or PAP dialin
How do you intend to bring up a dead router through an attached modem. Do
you mean if an interface goes down?
-Original Message-
From: Brian Fitzpatrick
To: [EMAIL PROTECTED]
Sent: 18/06/01 12:11
Subject: Newbie Question [7:8933]
Hi,
how do I set up a router with a dial in modem? Is it
Hi. I have tried doing a similar thing but as soon as you configure:
aaa new-model
you are them almost stuck with using usernames and p/w for any form of
access, this includes vty and console. You may need to check the Cisco
Connection Online (CCO) to find out more.
Hope this helps.
Message P
This should do the trick in its most basic form
I use a similar config just with tacacs+
aaa new-model
aaa accounting network default start-stop group radius
radius-server host 199.191.104.9
Tim
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> Ash
If it's not doing any authentication, what is it going to account to the
Radius server?
If you just want to capture when the lines come up and go down without any
user info then you can do this with a syslog server.
-Original Message-
From: Ashraf Wagih [mailto:[EMAIL PROTECTED]]
Sent: M
I captured several frames with MACs of 45-00-. They are
[Ethernet[IP/TCP]] frames missing the first 8 bytes, as Priscilla
guessed. The Switch is not incrementing CRC errors so my guess is that
the nic/driver has a bug. I have so far seen a couple different apps
within the weird frames so I s
Hi all,
I just purchased 8MB of Flash for a 2501, I was wondering how one would go
about installing it? Is it mere open the router and plug&chug? I also am
going to load a new IOS on it, so should I erease the old IOS and then copy
from the image from the tftp server to the router? Thanks!!!
B
I have this book, and I confess that I have not totaly picked through it
yet. What errors are you referring to?
__
Thomas Crowe
Technical Director
Research & Development
CTS - Atlanta
Phone: 770-664-3900 ext 45
__
-Original Message---
I just passed the Cisco Internetwork Troubleshooting (CIT) Exam (SUPRT
640-506) and if you're familiar at all with this exam, you know it's one of
the toughest Cisco exams in the CCNP certification track . Covering
troubleshooting techniques for Appletalk, Novell, Frame Relay WANs, ISDN,
VLANs and
Hi Group,
Has anyone installed the cisco 500 series content
engine. I've just been reading the manual and it
contains to Eth ports.
My question is, what is the second eth port for ?
Regards,
Phil.
Do You Yahoo!?
Get your free @ya
Hi,i just joined a new company and we have TACACS running on bsdi. One of
the user is not been able to authenticate. i am not sure how to fix this
problem. anyone tell me how it works ?cheersshella
Get Your Private, Free E-
It does not matter which serial interfaces you use, so you should have
no problem connecting Serial 0 on one router to Serial 1 on another
router. There is one caveat, though. Usually the first two serial
interfaces are high-speed and the rest are low speed. If you connected
Serial 0 to Serial
More likely than not both circuits share some equipment along the way. It's
not uncommon for carriers to use third party networks if they don't own
facilities in the area...
You *can* ask for proper circuit diversity from one carrier. You will pay
more but you'll know (at least as much as you can
Ebay ususally has them really cheap. But not sure they will have the ones
you need.
""Omer Ehsan Dar"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi all,
> could anybody point out the source of cisco boot strap chips? Can we use
> third party chips or do they have to be cisc
Hey folks
Just thought I'd pass along this new RFC resource website - its an official
RFC Org. mirror - easy to search by word/topic.
www.rfcdoctor.com
PS - type in "coffee" or "monkey" and catch up on the latest new "technology
breakthroughs" and a few laughs!
-Ciscodog
CCNP/DP
and IE2B!
Thanks John. Y'day night I played around by connecting the interface vice
versa. It works. You are correct. I have noted your clockrate comment
which I will implement when I purchase 2522.
RamG
""John Neiberger"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> It does not ma
I thought Cisco is more of a software (IOS)company than a hardware company?
-Bubba
""Omer Ehsan Dar"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Dear paul,
> Hi, being an electrical engineer myself I have to say that I agree with
> all the points you made except one. That i
Dear All,
I remember that this question is from RECRUIT at Hong Kong MTR. Why do
you ask this question here? You should find the answer by yourself.
ps. That is advertisment for IT people.
SeaTigerIII
- Original Message -
From: "parky chan"
To:
Sent: Monday, June 18, 2001 12:55 P
You can get the 2500 BOOTROM's free (+ shipping) from Cisco, but I do not
know about the other models.
Read how I got mine by clicking the CCNP link below.
Hth,
Ole
~~~
Ole Drews Jensen
Systems Network Manager
CCNA, MCSE, MCP+I
RWR Enterprises, Inc.
[EMAIL
Hi, somebody knows which are the port(tcp/udp) used for VoIP???
regards
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=8956&t=8956
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report mi
Are you replacing a 4MB with a 8MB or adding the 8 to an existing 8?
If replacing, a recent thread indicated that just doing a copy tftp flash
would do it. I've gone the long way about this. Change config register to
0x2101 and reloaded to router(boot)> Then done the tftp.
If adding to existing Fl
At 10:55 AM 6/18/2001 -0400, Bob Edmonds wrote:
>Hi all,
>
>I just purchased 8MB of Flash for a 2501, I was wondering how one would go
>about installing it? Is it mere open the router and plug&chug? I also am
>going to load a new IOS on it, so should I erease the old IOS and then copy
>from the
I have set span to mirrior VLAN 1 traffic out destination port 5/33. When I
connect my NAI Sniffer to port 5/33, it returns a utilization rate of
90-100%. When I look to see how many bytes of traffic are being sent, my
Sniffer tells me 10 million to 15 million octets. How can this be 90-100%
ut
The Sniffer doesn't know anything about the 32 Gbps backplane. It just
knows it's connected to a 100 Mbps Ethernet port.
Priscilla
At 12:08 PM 6/18/01, Wilson, Christian wrote:
>I have set span to mirrior VLAN 1 traffic out destination port 5/33. When I
>connect my NAI Sniffer to port 5/33, it
The l0phtcrack tool will crack that password for you. Get it here:
http://packetstorm.securify.com/Crackers/NT/l0phtcrack/
""parky chan"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Dear all Expert
> can you help me solve this problem?
> if i don't know the administrator passw
-Original Message-
From: Steiven Poh - Jaring Mailbox [mailto:[EMAIL PROTECTED]]
Sent: Sunday, June 17, 2001 11:00 PM
To: [EMAIL PROTECTED]
Subject: Re: administrator password problem [7:8913]
any suggested site?
- Original Message -
From: "[EMAIL PROTECTED] (Timothy Ouellette)
Hi,
i know i shouldn`t do this BUT..
i have a 2501 for sale
ios12.9 8mb flash 8mb ram 1eth(transevior) 2xserial
no cables..
contact me with price
_
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotma
At 11:17 AM 6/18/01, Wilson, Christian wrote:
>So if I am connected to the SPAN destination port and am monitoring VLAN 1,
>what is 90-100% utilized? The SPAN destination port?
I wouldn't say the port. Think about it from the Sniffer's point of view.
The Sniffer is reporting that the network to
Can you be more vague?
>From: "parky chan"
>Reply-To: "parky chan"
>To: [EMAIL PROTECTED]
>Subject: VLAN [7:8921]
>Date: Mon, 18 Jun 2001 04:47:10 -0400
>
>Dear
>How to make a VLAN at my company
>my company has 100 PC
_
Get your FR
Hi,
I have been trying to login to Galton's cisco tracking site for half hour,
it keeps giving me error message, anybody face the similiar problem?
What happened to Galton.
Your input is appreciated.
--
Best Regards
Raymond Cai
Network Engineer
CCNP/CCNA/SUN CSA&CNA/MCSE/CNE
Message Posted
I need something to log SNMP traps. Something as simple as a Syslog server.
Something hopefully free or cheap.
No bells or whistles needed.
Thanks,
Bob
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=8968&t=8968
--
FAQ,
Try EBay
""Navin Parwal"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi
>Can anyone tell me where I sould buy the following things on the net :
>
> 1) Cisco Router Rack for Cisco 2600 and 3600 series
> 2) DRAM and Flash for Cisco 2600 and 3600
> 3) ISDN simulators
>
> I
Kiwi Enterprises offers some freeware as well as full feature (low cost)
software that may suit your needs.
Browse
http://www.kiwi-enterprises.com/software_downloads.htm
Regards, Luke
""Bob Johnson"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I need something to lo
I don't have the FM but on the Cisco site it lists the 'Ethernet 1 port'
as "Not currently supported" so you could use it as a storage location for
one end of an rj45 enhanced network cable.
""Phil Barker"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi Group,
> Has anyon
300GBP
Rashid
0208 509 2990
07785 362626
""Stephen Skinner"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi,
>
> i know i shouldn`t do this BUT..
>
> i have a 2501 for sale
>
> ios12.9 8mb flash 8mb ram 1eth(transevior) 2xserial
>
> no cables..
>
> contact me with price
that was really vauge.
explain your setup and the protocols you are using...
make sure that tcp ports 1719 & 1720 are open...
Peter Slow, CCNP Voice Specialist
Network Engineer
Planetary Networks
535 West 34th. Street
New York, New York
10001
Cell: +1(516) 782.1535
Desk: +1(646) 792.2395
Mail: [
syslog? free? Linux?
Peter Slow, CCNP Voice Specialist
Network Engineer
Planetary Networks
535 West 34th. Street
New York, New York
10001
Cell: +1(516) 782.1535
Desk: +1(646) 792.2395
Mail: [EMAIL PROTECTED]
-Original Message-
From: Bob Johnson [mailto:[EMAIL PROTECTED]]
Sent: Monday, J
can any one eloborate the functionality of Supervisor Engine!!??
ASM
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=8973&t=8973
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misco
I may be showing my ignorance but as far as I know syslog and snmp traps are
different
Syslog I have handled but I'd like something that will log traps
Bob
-Original Message-
From: Peter Slow [mailto:[EMAIL PROTECTED]]
Sent: Monday, June 18, 2001 11:10 AM
To: 'Bob Johnson'; [EMAI
Troll,
If you didn't want people to ask for it, why did you advertise that you HAD
IT!?
""kevin jones"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> People,
>
> STOP sending me email requesting for Olive code. I have the code but I
> am NOT going
>
> to give it out to anyone.
I installed a lot of this content engine, and i ask to a cisco engineer
about this port, and said that actually the software does not support this
ethernet-1.
Regards,
ESilva
MCP, CCNA, CCNP+Voice, CCNP+IPTelephony, CCIE(Written)
-Original Message-
From:Luke [EMAIL PROTECTED]
Sent
Bob,
I'm using the Kiwi free syslog server (ver 6.2.9) to catch SNMP traps
generated by Cisco equipment. Of course this is NT based, most any syslog
server will accomodate what you want to do just pick your favorite OS and
search the web.
""Bob Johnson"" wrote in message
[EMAIL PROTECTED
Check http://www.bttsoftware.co.uk/ they have a small application called
SNMP Trap Watcher. I just ran across it earlier and havent used it so I have
no idea how good it is.. but hey.. its free!
Tim
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> B
I think by default IRB bridges all protocols, include IP, that's what I get
from CCO:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/ibm_c
/bcprt1/bctb.htm
In this document there is a example named "Complex Integrated Routing and
Bridging Example", it is very similar to
I'm working on a situation where two routers are to be connected by a
frame-relay connection. An ISDN dial-backup will be available. A tunnel
interface has been created to bring IPX across the IP Backbone. My question
involves the dialer-list on the BRI interface.
When I'm defining interesting tr
I have a simple triangle of three switches, Switch A,B, and C. Switch A is
the root and is connected to Switch B via one trunk link and Switch C via
another trunk Link. Switch B and C are connected to each other via a trunk
link as well. Switch A, the root, has 10 VLANS assigned and all switche
For what OS do you need this thingie ? Assuming you need it for windows
here is something that might fit your needs:
http://www.bttsoftware.co.uk/snmptrap.html
hth
Reinhold
On Mon, 18 Jun 2001, Bob Johnson wrote:
> I need something to log SNMP traps. Something as simple as a Syslog server.
>
Thanks Tim,
This is exactly what I was looking for.
Lot's of people have been mentioning syslog servers but as far as I can tell
none of them log SNMP traps (which as far as I know use a different port
number). While Cisco routers can send out both syslog and SNMP traps I have
a need to monitor
I NEVER advertised that I had it. I just gave instructions on how to
install Olive. I guess people thought they could get a free lunch. Too
bad.
>From: "Patrick Bass" >Reply-To: "Patrick Bass" >To: [EMAIL PROTECTED]
>Subject: Re: How to install Olive? [7:120] >Date: Mon, 18 Jun 2001
14:39:30 -
He is right about the sniffer being connected a 100Mb port. And you are
also right about it only being around 120Mbps. What you also have to
remember is that if these are broadcast packets (which if they are, you have
a little bit of a problem), they are being sent out every port (100Mb X 48 X
n
I have just tried it and it seems to be working fine.
But on their site, one can see the following advertisement :
Cisco OnLine Testing (COLT) will be upgraded to COLT 4.0.
The application will be DOWN
FROM : June 29, 2001, 6:00 A.M PDT
TO : July 1, 2001, 2:00 P.M PDT .
The application will N
I haven't been around much lately or had time to read much, but I still like
to post odd tid-bits that I run into.
Cisco 7960 IP phones (probably all of the 79xx line) can run 100mbit
full-duplex. However, they will not run full-duplex on a Catalyst 4006
48-port inline power blades *if* you set
I have a CSS 11000 serving 4 webserver. The users are
retrieving and updating the data from a sql database
thru the webservers. If a webserver is crashed while
the user has a session connecting to the database, CSS
will switch it to the next available web server. I
wonder whether or not it is poss
After going through the first lab (BGP), here are some of the errors I've
encountered:
p. 16 - chart shows three routers all connected to "S0" interface of a
frame-relay switch.
p. 17 - chart lists Loopback 0 twice. This could mean multinetting a
loopback (which I'm not even sure is possible),
...but ci$cowork$ is only like 14 Gs
-Original Message-
From: Bob Johnson [mailto:[EMAIL PROTECTED]]
Sent: Monday, June 18, 2001 3:30 PM
To: [EMAIL PROTECTED]
Subject: RE: OT Simple SNMP Trap Logging Application [7:8968]
Thanks Tim,
This is exactly what I was looking for.
Lot's of pe
I noticed a few of you have taken both CCNA and CCDA. How would you compare
the level of difficulty of these exams and how much overlap is their between
tests. If I pass CCNA is their that much more to learn to pass CCDA? I
looked at the objectives and they seem similiar. Basically I wanted to kno
i havent seen this, and i dont know what you mea, but i can tell you that ip
classless is usually a default command if ip routing is on...
/me ducks
Peter Slow, CCNP Voice Specialist
Network Engineer
Planetary Networks
535 West 34th. Street
New York, New York
10001
Cell: +1(516) 782.1535
Desk: +1
I know that these boxes can do dynamic replication of web content but
you're wanting to do dynamic, instantaneous replication of per-session
user data. Of the top of my head I can't think of a way to do that.
Perhaps there is a way but I'm just not sure if the CSS switches have
that capability.
I've never configured this but I thought I'd take a stab at it anyway.
My thinking is this: since IPX is not being routed directly across the
ISDN link, then there is no need to place IPX traffic in the dialer
list. You don't want IPX traffic to trigger the dialer, you want
IP-tunneled IPX traf
I still cannot login. don't know why. after submit my ID, always see
login.idc fail.
Thanks for your reply anyway.
--
Best Regards
Raymond Cai
Network Engineer
CCNP/CCNA/SUN CSA&CNA/MCSE/CNE
""marc marichal"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I have just tried
Its almost $1500US if you take it Halifax. Gotta love those Canadian taxes.
---JRE---
273 days and counting.
""sumit"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Following is the excerpts from CCIE site:
>
> After a rigorous evaluation of our current cost structure, we find
You will want to investigate stickyness on the AP er.. um.. pardon me.. CSS
regarding your requirements. The company I work for has a CDN delivery
group so I have a little exposure to these guys...
> I have a CSS 11000 serving 4 webserver. The users are
> retrieving and updating the data from a
You can always download ISOs of Linux and other free stable OSes. You can
even download the latest and greatest 2.4.5 kernel from www.kernel.org!
Sorry.. couldn't resist :)
> I NEVER advertised that I had it. I just gave instructions on how to
> install Olive. I guess people thought they cou
Thanks Dude- got my virus all quarantined :o)
Phil
- Original Message -
From: RamG
To:
Sent: Sunday, June 17, 2001 7:02 PM
Subject: Re: RIP Update [7:8897]
> Thanks Circusnuts. Problem solved. The interface connection was wrong
> between the routers.
>
> By the way can someone clar
Greetings all,
I've this strange result from traceroute. Listed below is the output from a
trace I did from my machine to a remote router, I get 3 responses from the
same host as seen below. have you guys seen this before?
ThanksNabil
C:\>tracert xxx.xxx.23.1
Tracing route to kcd-c1-e01
Cisco agreement!!??? Cheating must be discouraged, everywhere. See below;
yet another reason Cisco certs are becoming 'required' while advanced
degrees are 'preferred' in those lucrative job postings
>From the Bellingham [Washington State] Herald, June 17, 2001, Editorial
Opinion:
"In an ou
please, be stupid or paranoid, but not both.
bash-2.03$ nslookup epa.gov
Name:epa.gov
Address: 134.67.99.44
bash-2.03$ nslookup 134.67.139.1
Name:rtp-c5-fa1-1-2.nccr.epa.gov
Address: 134.67.139.1
bash-2.03$
bash-2.03$
bash-2.03$
bash-2.03$ nslookup kcr-c3-s00-00.nccr.epa.gov
Name:
Hello,
To be honest with you, I finished my CCNP, CCDA, and CCDP in two weeks
time. If your going to study for the certs do it in groups, your right the
CCDA is not much different then the CCNA, probably a little easier. The
CCDP test is the tougher of the two design exams.
""Sam Sneed"" w
Hello,
I just couldn't resist stating this on the groupstudy, please respond
with your feelings on this matter. I started studying for my CCNA back in
October of last year. I was lazy so I took my time and passed the test in
December of last year. I got lazy for a while and then I began st
Try this
I am not sure for w2k but on nt 4.0 it works. This is
linux based tools.
http://home.eunet.no/~pnordahl/ntpasswd/
--- Jon Krabbenschmidt wrote:
> -Original Message-
> From: Steiven Poh - Jaring Mailbox
> [mailto:[EMAIL PROTECTED]]
> Sent: Sunday, June 17, 2001 11:00 PM
>
I agree whole-heartedly, but I really don't want to have to wade through a
bunch of "paper certs suck" postings on this newsgroup again!!
- Original Message -
From: JC
To: [EMAIL PROTECTED]
Sent: Monday, June 18, 2001 7:28 PM
Subject: Passing Exams without a lab!! Read this its a thought
I apologize did not mean to revive the dead, I just hate that they don't do
anything about it.
""Bradley J. Wilson"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I agree whole-heartedly, but I really don't want to have to wade through a
> bunch of "paper certs suck" postings on
Is there any specific type of flash memory cards that can be use with any
cisco gear for storing IOS, CAT-OS ?
Such as Catalyst 6500 and Router 1600, 3600, 7200... If so, do they need to
be formatted or configured differently ?
Thanks,
Manny
Message Posted at:
http://www.groupstudy.com/for
Is there any specific type of flash memory cards that can be use with any
cisco gear for storing IOS, CAT-OS ?
Such as Catalyst 6500 and Router 1600, 3600, 7200... If so, do they need to
be formatted or configured differently ?
Thanks,
Manny
Message Posted at:
http://www.groupstudy.com/for
When I have seen that it is typically a host hidden behind a firewall
- Original Message -
From: "Nabil Fares"
To:
Sent: Monday, June 18, 2001 3:11 PM
Subject: Help with traceroute issue [7:9002]
> Greetings all,
>
> I've this strange result from traceroute. Listed below is the output
Dear all exper
pls help me check config when I config dial in router 2501 . show me where is
wrong . because when I dial in from PC It verify username pass end then
disconnect
Thank
router2501#show ru
Building configuration...
Current configuration:
!
version 11.1
service timestamps debug uptim
Dear all exper
pls help me check config when I config dial in router 2501 . show me where is
wrong . because when I dial in from PC It verify username pass end then
disconnect
Thank
router2501#show ru
Building configuration...
Current configuration:
!
version 11.1
service timestamps debug uptim
Dear all exper
pls help me check config when I config dial in router 2501 . show me where is
wrong . because when I dial in from PC It verify username pass end then
disconnect
Thank
router2501#show ru
Building configuration...
Current configuration:
!
version 11.1
service timestamps debug uptim
Dear all exper
pls help me check config when I config dial in router 2501 . show me where is
wrong . because when I dial in from PC It verify username pass end then
disconnect
Thank
router2501#show ru
Building configuration...
Current configuration:
!
version 11.1
service timestamps debug uptim
Dear all exper
pls help me check config when I config dial in router 2501 . show me where is
wrong . because when I dial in from PC It verify username pass end then
disconnect
Thank
router2501#show ru
Building configuration...
Current configuration:
!
version 11.1
service timestamps debug uptim
7200 and 6500 use the same type flash and format. 3600 is different. Not
sure about a 1600.
Tony M.
#6172
- Original Message -
From: Manny Jimenez
To:
Sent: Monday, June 18, 2001 7:17 PM
Subject: Flash memory anyone ? [7:9011]
> Is there any specific type of flash memory cards that
Hi all,
I am trying to see the debug output on my routers via telnet sessions but am
not having any luck. I first got the debug ip packet command to work but
then it stopped working. No other debug commands will work. Eg. debug ip
igrp trans
I have the service timestamps commands issued along w
There are a lot of different ports used for VOIP.
For the actual RTP stream:
UDP ports 16384 to 32767
For H.323 control traffic:
TCP ports 1720 and TCP port range 11000 to 11999
For MGCP control traffic:
UDP port 2427
TCP port 2428
For Skinny contol traffic:
TCP ports 2000,2001, and 2002
Happ
Very simple.
Attach the modem with the proper adapter and cable to the AUX port of the
router.
Configure router as follows:
Line aux 0
modem dialin
login
password cisco
transport input all
speed 115200
flow hard
modem autoconfigure type usr_sportster (or whatever type of modem you are
using. The
1 - 100 of 105 matches
Mail list logo