Hi All,
Has anyone managed to get dlsw working using frame relay
encapsulation.(Direct Encapsulation)
Are there any good examples anyone has that I could look at ?
Cheers
Richard
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=24475t=24475
It is no need test...the as-path-accesslist of chunk is doing what you want..
it is no problem by my practise..
- Original Message -
From: Julian Eccli
To:
Sent: Monday, October 29, 2001 3:40 PM
Subject: Re: Second opinion on Regular Expression [7:24460]
Chuck,
You need to make
Hi all,
I juz configure my routers as below:
cisco2909-modem--- PSTN ---modem-cisco2909
when i start dialing everythin seemed okay. Even the
DSR came out but unfortunately after that, my ppp
autoselect failed... then DSR went off.. everythin
restore again..
My question is, what layer should i
Hi all,
I'm preparing for taking the PIX advanced exam within 2 days but I need to
know how the exam looks like...type of questions and main points to focus on
in my study.
Any help greatly appreciated.
BR,
komy
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=24478t=24478
sh ver WS-C5509 Software, Version McpSW: 4.5(1) NmpSW: 4.5(1)
Copyright (c) 1995-1999 by Cisco Systems
NMP S/W compiled on Mar 29 1999, 16:09:01
MCP S/W compiled on Mar 29 1999, 16:06:50
-Original Message-
From: AMR [mailto:[EMAIL PROTECTED]]
Sent: Monday, October 29, 2001 9:30 AM
To:
Thanks Chuck,
So just so I am clear, this command along with the no ip doamin-lookup helps
in reducing
time out waits while trying to configure routers quickly by protecting
against mis typed
telnet name and commands.
Bill
Chuck Larrieu wrote:
yes. and this is a good command to know.
when
Hi,
I want to know how to configure the routers for load
balancing.
Here is the situation.
I have 3 2610 Routers.One is having two serial
interfaces.What i want is the two serial interfaces of
that router should be connected two another two
router's serial interfaces.After that those two
routers
Hi,
When should one use the command neighbor x.x.x.x ebgp-multihop?
Some cisco document on the web just says as follows:
- Use the ebgp-multihop command only when the ip address you are peering
to
on your eBGP peer is not directly connected
Any help will be appreciated.
Thanks
BS Kang.
Hi,
I want to know how to configure the routers for load
balancing.
Here is the situation.
I have 3 2610 Routers.One is having two serial
interfaces.What i want is the two serial interfaces of
that router should be connected two another two
router's serial interfaces.After that those two
routers
Hi,
I want to know how to configure the routers for load
balancing.
Here is the situation.
I have 3 2610 Routers.One is having two serial
interfaces.What i want is the two serial interfaces of
that router should be connected two another two
router's serial interfaces.After that those two
routers
Hi John,
I want to know how to configure the routers for load
balancing.
Here is the situation.
I have 3 2610 Routers.One is having two serial
interfaces.What i want is the two serial interfaces of
that router should be connected two another two
router's serial interfaces.After that those two
i already posted the message regarding the interface flapping.
what are the possible causes for a hssi interface running bgp to flap?
is there any bug in the ios? i am using the hssi interface hardware
m2t-hssi-b.
if any one having experienced similar problem let me know.
k. sadagopan
Hi,
I want to know how to configure the routers for load
balancing.
Here is the situation.
I have 3 2610 Routers.One is having two serial
interfaces.What i want is the two serial interfaces of
that router should be connected two another two
router's serial interfaces.After that those two
routers
Thats a tough exam. I used Robert Padjens and Todd Lamles Sybex CID study
guide. That was certainley adequate. I also took a Boson exam or two. the
worst part is all the old technologies and the old Stratacom switch stuff
and LANE. Cisco badly needs to revise this old and outdated exam. Its from
hi
just put a default route pointing to the specific routers with equal cost.
say 0 or 10. this will forward the traffic as the way you require.
ip route 0.0.0.0 0.0.0.0 {first router's serial interface} 10
ip route 0.0.0.0 0.0.0.0 {second router's serial interface} 10
try this and let us
Does anyone have any up to date news on wether Mentor is going out of
bussiness or not? They still owe me some classes that have been paid for.
Last week, as of Friday, the employess and instructors still had not got
paid for there last checks. Based on that it does not look good.
Thanks,
Randy
I have configured 4000 router (FR_ROUTER) as a FR Switch. It is connected
to
3
other 2500 routers (A,B,C)on serial interface. FR is working fine and I am
able to ping B C from A. But I am not able to ping the Serial Interface
of A
from router A itself. Same thing is happening on the other
I dont think you can ping a serial interface on the same router your on.
Serial interfaces are not able to be pinged from the same device.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=24493t=24450
--
FAQ, list archives, and
Hi everyone
I'm trying to setup a ACS server for fault tolerance/load balancing (I'm not
sure if they are separate features or work together) connected to two Cat
6Ks. The ACS is a HP netserver and was already set up with two NICs and a
virtual interface before I got my hands on it. The nics are
which routing protocol are you using?
John Tafasi
watch your call records on the web at
www.freedomstar.com/sh1885969
Rishi wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hi,
I want to know how
Three letters - N D A
Do what I do on those screwy tests that there arent any study materials
available for. Don't bother studying. Go take the test. Study for a week,
and go take the test again. I wouldnt recommend it for the CCIE written
exams, but that method has done me well on the
I am using the Cisco CID Exam Certification Guide (cisco press) by Mike
Crane. It is better than the Cisco Internetwork Desing from cisco press. The
book comes with a test engine on a CD. I hope that will help
John Tafasi
watch your phone call records on the web at:
www.freedomstar.com/sh1885969
Hi,
This command is used when trying to load balance with
an ebgp peer. Typically this is when your neighbour
statement is mapped to the ebgp peers loopback
address.
Regards
Jonathan
--- Kang, Byeong Soo
wrote:
Hi,
When should one use the command neighbor x.x.x.x
ebgp-multihop?
Encapsulation failed means that the router knows how to get to the
destination, i.e. it has a directly connected interface, but doesn't know
how to send the packet. Check your interfaces and make sure they are mapped
and physically connected correctly. Check out the link below:
Hi,
Normaly use ebgp-multihop if you put the IP address
of loopback interface of your peer at the neighbor command eg:
if your peer loopback is 1.1.1.1, the command will be
neighbor 1.1.1.1 remote-as 1
neighbor 1.1.1.1 update-source loopback
neighbor 1.1.1.1 ebgp-multihop.
As the document says
Chuck,
I too have dealt with Pat McKool. I was also very impressed with the
product/service that I received. In the event that I need to buy more
equipment, I will definetly give Pat a call.
TIm
-Original Message-
From: Chuck Larrieu [SMTP:[EMAIL PROTECTED]]
Sent: Monday, October
I don't think thats going to work. What he made it sound like, is that
this is two different physical servers, each off a seperate physical
router. Both of those routers are headed by a single router. If you put
the below on the router that heads the other two, what will happen, is a
tcp
Here is the Cisco link. The software is still available on
ftp-eng.cisco.com (/pub/tacacs/) via anonymous login.
http://www.cisco.com/warp/public/480/tacplus.shtml
Jeff.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Monday, October 29, 2001 12:24 AM
To:
passed the CSPFA exam one hour ago, my score was 918. the exam was not easy,
some questions was confusing in there typing. also you should know how to
type in commands no choose from drop down menu ( specially that basic
commands for PIX ), know authentication proxy and AAA related issues well.
No, this is twisting your words around:
now, my words around you're Hay twisting.
Makes it sound a little Shakespearian. ;-)
Ken
nrf 10/28/01 10:37PM
Hey now, you're twisting my words around.
[snip]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=24505t=24336
Thanks Chuck Tim,
It's nice to promote honesty.
Have a great day,
Ole
~~~
Ole Drews Jensen
Systems Network Manager
CCNP, MCSE, MCP+I
RWR Enterprises, Inc.
[EMAIL PROTECTED]
~~~
http://www.RouterChief.com
You need this command when you are talking to a neighbor not connected to
the same IP segment. For instance, if the serial interfaces are numbered
and you want to talk loopback interface to loopback interface, you need the
multihop because the serial interface addresses are between the loopback
I worked for an aftermarket dealrship (Optimum Data) - Pat McKool has
been in the business a long time (ten years? more?) and is very
respected. I've done a number of sizeable deals with him and I trust him
completely.
Ouellette, Tim wrote:
Chuck,
I too have dealt with Pat McKool. I was
Congratulations - Nice score!
Can you reveal the number of questions, passing score and time without
breaking the NDA?
Thanks,
Ole
~~~
Ole Drews Jensen
Systems Network Manager
CCNP, MCSE, MCP+I
RWR Enterprises, Inc.
[EMAIL PROTECTED]
any one have passed recently the CSVPN or CSIDS exams today...
what kind of difficulty any fill in commands as CSPFA ..
thanks
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=24509t=24509
--
FAQ, list archives, and subscription
Hey Gang, I need some advice. I am looking for a software package that
will monitor and report on internet bandwidth usage by either per URL or
per IP address.
Any and all ideas would be appreciated.
Thanks in advance,
Steve Smith MCSE, CCNA, CCDA
Data Networks Technical Manager
Freeliant Inc.
Try the EtherBoy suite. It works fine for IPs but no URL option to monitor
as far as I know.
HTH
Cristian
-Original Message-
From: Steve Smith [mailto:[EMAIL PROTECTED]]
Sent: Monday, October 29, 2001 7:01 AM
To: [EMAIL PROTECTED]
Subject: Internet monitoring [7:24511]
Hey Gang, I need
Hi All,
I need help for the CID exam, I'm going for CID this week and have no idea
from where to study Stratacom products and SNA topics.. Please help me and
guide me through the exam... or mail me if you have any good stuff.. I will
really appreciate..
My e-mail is [EMAIL PROTECTED]
Thanks in
Haven't gone thru' CSIDS yet.
As of CSVPN, should be easier though I also scored 918 in CSPFA while 887 in
CSVPN.
Need to know down cool all thing related to IKE/IPSec. CA is also important.
These include configuration on VPN3000, IOS and PIX.
Know the concentrator is also the key.
Good luck.
You can if you map the local L3 addr to the local L2 addr. For example
frame-relay map ip x.x.x.x dlci#
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
McHugh Randy
Sent: Monday, October 29, 2001 5:08 AM
To: [EMAIL PROTECTED]
Subject: Re: Cisco 4000
I just searched cisco on those two key words (sna / stratacom) and found
pages of info for you to study.
good luck.
Rayhan Uddin wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hi All,
I need help for the CID exam, I'm going for CID this week and have no idea
from where to
I would first start by doing a 'debug ppp negociation' on both ends and
watching what happens and seeing where it fails.
I had a similar problem before, and it turned out to be actually during the
CCP (Compression) negociation, but using that debug will help narrow it down.
Good Luck!
Mike W.
As long as you can communication using IP between the two peer routers (i.e.
either both frame connections have an IP, are using unnumbered, or you setup
the DLSW tunnel using a loopback), your DLSW tunnel should work just fine.
Can you explain a bit more about your problem and perhaps post the
I did read some Cisco document saying that if you setup a frame connection
on a serial interface you couldn't ping the ip of that interface (probably
can if you use a MAP command). However, if you setup the frame on a
subinterface (S0.1, etc) then you CAN ping it. I have no idea why it's like
my company is ordering Cisco as3500's, does anyone have any Idea how I would
go about testing this equipment
_
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp
Message Posted at:
Micheal,
Thanks for the reply.
I was looking at using the commands as follows for what Cisco call direct
encapsulation , rather than specifying ip addresses as the remote peer
destination
GLobal config
dlsw local-peer
dlsw remote-peer 0 frame-relay interface s0/0
Interface commands
We support you with the needed experience to pass your certification. You
can train the needed hands on in our lab environment. It is very important
to have hands-on training before you go to your test center or the CCIE lab.
www.ccxx-lab.com
From 01-11-2001 - 15-11-2001 we offer you a FREE
my company is ordering Cisco as3500's, does anyone have any Idea how I would
go about testing this equipment
_
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp
Message Posted at:
This is more just a funny FYI. I was in a 2900XL switch the other day, and
I was going to do a show command. Well, I got my fingers all messed up and
actually typed:
sho w
and the command actually output something. However, I tried a:
show w?
and the IOS claims there is no argument of the
Hey all. I've got a situation where I not only need to have a router
configured with multiple Radius servers, but now, each one needs it's own key.
According to Cisco docs, IOS prior to 12.0 would only allow you to set a
Global key for all Radius servers to use (with the radius-server key
I just finished playing around with something like this at home and
discovered the same thing. I don't have the link handy, but I did find
an example of OSPF virtual links with authentication on CCO that
included this command.
I'm assuming this is necessary because once you've created the
You are correct. The ^ character symbolizes the beginning of the AS
path so you're as-path access list looks like it should work exactly as
you think. I'm not aware of the ^ having any other meaning in this
context. I used to have a link on regular expressions but I can't seem
to find it. If
Hallo, I' have a problem with a Cisco 761. I would like to reach the router
trought internet, 64K Isdn.
I create a user and then I insert the PPP Password client and host.
Using RAS from a windows I try to connect to the 761. The router refuse my
call. It says password not found. When I try to
I compared my new Cisco Press book for the routing
exam with the old book I bought over two years ago. I
found some major differences. The new exam guide book
does NOT have anything on:
Access lists
Managing IP/IPX traffic
Queuing
DDR
Source routing bridging
...
Are the above topics NOT
That's weird. Informative though.in a way. :
-Original Message-
From: Michael Williams [mailto:[EMAIL PROTECTED]]
Sent: Monday, October 29, 2001 11:20 AM
To: [EMAIL PROTECTED]
Subject: Funny Unknown Command on 2900XL [7:24526]
This is more just a funny FYI. I was in a 2900XL
I totally agree with you. Pat McKool is Customer Service at it's very best..
:-) Unlike w.w.w.i.q.s.a.l.e.com .
Chuck Larrieu wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
After some of the recent negative discussion about a particular auction
seller ( and thanks - it helped
Thanks to everyone who answered some of my questions on the BCMSN, now its
of to BSCN...
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=24533t=24533
--
FAQ, list archives, and subscription info:
Because of the high demand only one user can make a one day reservation in
the trial period.
Thomas Reisinger schrieb im Newsbeitrag
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
We support you with the needed experience to pass your certification. You
can train the needed hands on in our lab
Except when you're in the lab exam and you can't use static routes. ;^)
Darren
At 08:49 AM 10/29/2001 -0500, Engelhard M. Labiro wrote:
Hi,
Normaly use ebgp-multihop if you put the IP address
of loopback interface of your peer at the neighbor command eg:
if your peer loopback is 1.1.1.1, the
Looking for CID cbt to borrow, buy, etc. Anyone?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=24535t=24535
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and
Hello!
Someone is going to sell me his routers and wanted to ask if they are a good
deal. Please help me and advice me if they are good price.
1.) Cisco 4000M Router with 16/16, 2 Serials Ports, 2 Tokens Rings
Ports, and 4 ISDN ports for $400USD.
2.) Cisco 2524 Router with 8/4 flash, 1 module
No,
Most of it moved to BCRAN exam.
Gareth
J. Li wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
I compared my new Cisco Press book for the routing
exam with the old book I bought over two years ago. I
found some major differences. The new exam guide book
does NOT have
At 08:25 PM 10/28/01, Tribavan Raina wrote:
Hi..
When we give no keepalive command on ethernet or fast ethernet ,the port and
line protocol come up but when we do the same thing for serial port why
doesnt it work.
It should work if you turn keepalive off on both ends of the serial link.
On
IPX is still in CIT, CID, and CCIE. So I would say it is on topic! ;-)
Please let us know what you find out. It sounds like a bug...
Have you made sure nobody configured this command on the interface (or that
the new version didn't default to it?)
Router(config-if)#ipx update interval {rip |
For the 2500 series router: prices below 500 USD are good. So far I have
seen them up to 600 USD. To get a good comparison you can look at
www.comstarinc.com.
For the 4000M router for a just 400 that is good as it can get.
Emmanuel
-Original Message-
From: Charles Lin [mailto:[EMAIL
Well Gadzooks and Nodsbodykins.you could always try pumping gas!
- Original Message -
From: Ken Diliberto
To:
Sent: Monday, October 29, 2001 2:30 PM
Subject: Re: is it really bad market for ccie ? NO! NO! NO [7:24336]
No, this is twisting your words around:
now,
here is a list of undocumented commands for those with nothing to
do...
http://www.boerland.com/dotu/#s
have fun, not responsible if they crash your production router/switch
:)
Dave
Michael Williams wrote:
This is more just a funny FYI. I was in a 2900XL switch the other day, and
I
I'll save ya the trouble John:
http://www.cisco.com/univercd/cc/td/doc/product/atm/c8540/12_0/13_19/cmd_ref/appc.htm
Dave
John Neiberger wrote:
You are correct. The ^ character symbolizes the beginning of the AS
path so you're as-path access list looks like it should work exactly as
you
you mean as5300??
what do you want to test? There are millions, ok thousands in
production and they work well.
Dave
rick love wrote:
my company is ordering Cisco as3500's, does anyone have any Idea how I
would
go about testing this equipment
Interestingly, that link has the precise example that Chuck is looking
for and it--like Julian--recommends adding the .* to the access list.
I just did a show ip bgp regexp on one of our routers and didn't see
any difference between the following:
show ip bgp regexp $1239 .*
show ip bgp
ccie my ass, u only got 3 2500 router so get lost
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=24547t=24534
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and
Count me in too!
John
ALFREDO TORRES wrote:
I would be interested in being part of the cisco study group.
- Original Message -
From: Philip Jache
To:
Sent: Friday, October 19, 2001 8:24 PM
Subject: RE: New York Study Group [7:23580]
We could start one.
Philip Jache
Richard Botham wrote:
I see what you mean about direct encapsulation now. I see how that would
be fine if these are 2 ends on a point to point (many times when I setup
DLSW in the past, the two routers at the end of the tunnel were spread apart
across the WAN with many routers in between, so
Anyone heard anything new about Mentor? Are they out of business?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=24550t=24550
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report
Man O Man. I'm finding it super-tough to stay motivated with all of this
super-duper-heavy-geeky CCIE studying that I have to do. How do you guys
keep your mind focused and your eyes straight ahead? I find it really easy
to answer my phone on a friday night and talk to my buddies, next thing you
It certainly dosen't hurt to get a CCIE. The world is never going to throw
itself at you, so go out and learn as much as you can and get your CCIE. If
you can't get a job with a CCIE, you have other problems. I am just a CCNP
and I can get a job.
nrf wrote in message
[EMAIL
If you hear any good suggestions, pass them on! I've been very
unmotivated the last couple of days. I was doing really well the last
week or so but then I did a DLSw+ lab that kicked my hiney and it sucked
the life right out of me. So, I stopped studying for a couple of days a
read a Dean
I have been told that the Cisco Networker's conference's audio tapes are
supposed to provide you with the mantra on your way to work... :-)
From: John Neiberger
Reply-To: John Neiberger
To: [EMAIL PROTECTED]
Subject: Re: What do you cats do for motivation? [7:24549]
Date: Mon, 29 Oct 2001
Congratulations. I am taking BCMSN on Thursday. Passed BSCN already. Good
luck.
Brad
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=24555t=24533
--
FAQ, list archives, and subscription info:
Feels weird to reply to myself. Found this cool poster online, thought it
may help some of you.
http://www.autotrend.com/9211.html
-Original Message-
From: Ouellette, Tim [SMTP:[EMAIL PROTECTED]]
Sent: Monday, October 29, 2001 2:52 PM
To: [EMAIL PROTECTED]
Subject: What do
Does anyone here want to setup a free (forever free) online lab?
Maybe we could setup a way that we could donate older equipment and have a
hub setup somewhere of all this equipment. Each person would swap out
setting up labs for that week and each of the other members would have say
an
Then what command would one use if they ask you a question on BGP load
balancing in the LAB? I have always had to use the ebgp-multihop command
when configuring bgp load balancing using loopbacks and static routes to get
to the loopbacks! Any ideas then?
From: Darren Crawford
Reply-To:
I'd recommend using the following routers instead for a CCIE lab:
2x 2501s
2x 2503s (for ISDN)
1x 2511 (reverse telnet AS)
2x 2513s (TR/Ether)
1x 2522 (frame-switch)
ISDN Simulator
Catalyst 5k switch
If you still want to add on:
26xx routers with Voice
3900 TR Switch
That is usually the
Let's just say I wouldnt go buy stock in their company right about now (if
they were public):
http://www.washtech.com/news/software/13397-1.html
I feel bad for the technical people that work there. Quite a few of them
put in a lot of hard work and effort building up a good reputation and
That's funny - I was going to ask that same question today. When you
throw in the economy right now it makes it even less motivating to study
- esp. when you hear that your company is laying off 6k jobs. It kind
of gets you motivated to open up a convenience store (earlier thread).
I would like the remote users to be able to FTP data files to a folder on
the Back-up Domain Controller NT Server 4.0. Do I put in the IP
address of the NT server 4.0 under the access-list group? Can something
like this works:
access-list 110 permit ip any host 192.3.10.10
access-list 110
What is his ebay seller name?
And does anyone have any experience with KG2 or KG2.com?
On Monday, October 29, 2001, at 12:26 AM, Chuck Larrieu wrote:
After some of the recent negative discussion about a particular auction
seller ( and thanks - it helped me avoid bidding on certain
I have an 8 port Netgear switch to donate...I'm sure it has all of the
functionality of a cat 3900/5500...vtp, isl, vlans yada yada yada :) just
joking
-Original Message-
From: Patrick Ramsey [mailto:[EMAIL PROTECTED]]
Sent: Monday, October 29, 2001 2:52 PM
To: [EMAIL PROTECTED]
I'm trying to upgrade the IOS on a 2500 router. When I attempt to delete
the current IOS image, or erase the flash altogether, it tells me it's in
read-only mode. Fine. I've scoured Cisco's website trying to find a way to
put the flash into read/write mode so I can do this IOS update, but to
I need configuration help(manuals) my the as3500, keeps rebooting
I need to verify that their are hardware issues as opposed to software
configuration.
Release Notes for Cisco AS5300 Universal Access Servers for Cisco IOS
Release 12.1 XI
thanks
From: MADMAN
Reply-To: [EMAIL PROTECTED]
To:
Just lurking and read this thread... I can address the economy part of this
last post. I have found that it is an effective rule of life to study for
career advancement during economic downturns and work hard during the
upturns. This seems to provide maximum return for the efforts given and
I look very much forward to continuing picking up my paycheck every
month
Very best, G.
VP OGC
Youth is wasted on the wrong people.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=24568t=24549
--
FAQ, list archives, and
Have you tried just copying the new IOS onto it? See what happens when you
try to copy it in without erasing the existing image.
-Original Message-
From: Michael Williams [mailto:[EMAIL PROTECTED]]
Sent: Monday, October 29, 2001 4:35 PM
To: [EMAIL PROTECTED]
Subject: AARRGGHH!!! Flash
Good question been mulling it over since 9-11-01. It really hasnt been easy
to be honest, but I am ajusting and moving on now. CCIE is a break from the
rest of the certs out there, you must really want to do this the rest of
your life. Sounds simplistic Im sure but I'm in it for the money only to
Hello guys,
I was planning to ECP1 next month now there are gone..Do yu guys know any
other traning program?
Thanks
Zap
_
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp
Message Posted at:
Hi,
You do not have to delete the old IOS. Just copy the new one from TFTP to
Flash and it will prompt you if you want to delete the old one.
Good Luck
Ihab
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Michael Williams
Sent: Tuesday, October 30,
I just went through this last week. What a pain. Your problem is that the
2500's run from Flash, and its like trying to delete on open file on your
PC.
Here's what finally worked for me. I added a boot system command to an TFTP
server. When I rebooted the router it took about ten minutes
Hi All
I'm wondering what you think of as necessary information on a network
drawing. I'm thinking that each site will consist of two layers of
drawings, one for the WAN and one for the LAN.
Here's what I have so far as necessary for the wan:
site name - site address - site contact name - wan
If your paycheck was as small as mine is that might not be sufficient
motivation! ;-)
Hartnell, George 10/29/01 2:49:27 PM
I look very much forward to continuing picking up my paycheck every
month
Very best, G.
VP OGC
Youth is wasted on the wrong people.
Message Posted at:
Thanks to everyone on their input. I will try no partition flash or the
booting from TFTP.
This brings up an interesting question tho. Which models run from flash
therefore making the flash read-only and which models (like the 6500) let
you boot from flash, then read/write/erase the flash (I
1 - 100 of 154 matches
Mail list logo