Team,
Where will I be able to find information about designing a Data Center
Room. As always I appreciate your help and recommendation.
Thanks,
Juan
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=74126t=74126
--
Team,
Your opinion is always accepted as a good advice...Question if you are at a
point where
you are running out of time for the lab, what will be more efficient, take
the lab (spend $2000[traveling and the lab fees]) or let your written
qualifications expired and take it again[spend $300]...
Buddy.
The same thing from here, let us know the account and we will pitch in.A
mind is a beautiful thing to wasteand this newsgroup is to great to
waste.
Juan Blanco
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: Monday, July 14, 2003 6:25 AM
My two cents
Another thing that is very important and critical with redistribution is the
metric being used in both directions...
Juan
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of
Nigel Taylor
Sent: Sunday, March 30, 2003 3:52 AM
To: [EMAIL PROTECTED]
Yes, I have see this behavior many times and the key answer give it enough
time,
the problem is if you start making changes and still it does not works
because frame
needs time be on sync, normally what I do is configure it and keep making
other configurations
and them come back to it and the link
Try to put the FastEthernet module in a different slot, with 7200 some you
have to be very careful which slot you use for different modules...
Juan
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of
Xy Hien Le
Sent: Sunday, March 30, 2003 6:34 PM
To: [EMAIL
Binoy,
The following will give you some ideas of how to do this or least guide you
to the appropiate direction..
Good Luck
Juan Blanco
Cisco IP Telephony by ciscopress - David Lovell
A Cisco AVVID Solution Cisco CallManager Fundamentals by ciscopress -
Alexander Pearce
Cisco IP Telephony
7500 lab router as a stove (after all its runs all the
time anyway).
I breed prizewinning idioms. Fox Mulder knows my phone number. I have spoken
with Elvis.
Juan Blanco
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=65426t=65426
that I may have to buy one of them again because I had used them too many
times it is already damage...
BTW Jeff Doyle Volume II looks like the continuation of Solie Book (very
interesting)...
Juan Blanco
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of
The Long
Kiwi...It is great.you can download a working version.
www.kiwisyslog.com/
Juan Blanco
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of
Richard Campbell
Sent: Monday, March 10, 2003 4:00 AM
To: [EMAIL PROTECTED]
Subject: Any w2k syslog server
Chuck,
Yes I has been able to get the two channels to come up many times.
Juan Blanco
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of
The Long and Winding Road
Sent: Saturday, March 08, 2003 2:28 AM
To: [EMAIL PROTECTED]
Subject: Question on a particular
Al you need to do is the following assumming that you want to change the
vlan1 to vlan17:
execute the command vlan database
create vlan17 and give a name to it(optional)
assign the ip address to vlan17
assign vlan17 to any port that you want to be use with it
Hope the above helps...
Juan Blanco
You are correct about cats disliking people, I never like cat, I love dogs,
Our dogs love our kids and
our kids love our dogs...Our dog is part of our family..Dog are
better than cats.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of
John
Tunde,
The minimum will be two routers (2600), two FXS and two VNM(this is where
you insert the FXS). This will allow you to
have a point to point voice connectivity
Juan Blanco
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of
Tunde Kalejaiye
Sent: Monday
Team,
I want to be able to telnet to my internal network(terminal server) via the
Pix 501, I have a connectivity via my cable provider, I have only one IP
address. Before using the pix I have a router and I used to telnet to it
from the Internet then connect to my terminal server, now I
You do it by the following paths on the CD:
Release 12.2
Configuration Guides and Commands References
Cisco IOS Bridging and IBM Networking Configuration Guide Release 12.2
Juan Blanco
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: Sunday, March 02, 2003 9:01
/cc/td/doc/product/software/ios120/12cgcr/voice
_c/vcprt1/index.htm
Be aware that you need to find as many pdfs as possible related to the topic
because the technology is still going trough many changes
Good luck,
Juan Blanco
-Original Message-
From: [EMAIL PROTECTED] [mailto
is the following:
According to Cisco documentation I should be able to have access to a CLI
and do all my configuration this way as well but I don't see to be able to
do this any ideas what I have to do in order for me to have full access to
the CLI
Thanks,
Juan
Juan Blanco
Team,
I need to have access to a Cisco Wireless AP-1200 equipment this weekend, Do
any one here knows an online Rack available with the AP-1200 which I could
use.
Thanks,
Juan Blanco
The greatest glory in living lies
and
CCBootcamp)
a - Hello Computers
b - CCBootcamp
c - Boson
d - IPExperts
As always I really appreciate your input on this matter.
Thanks,
Juan Blanco
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=62915t=62915
--
FAQ, list archives
Randy,
Just type the following: clear frame-relay inarp in Router 1Sometime you
have to shutdown the interface and bring it back again
Juan Blanco
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
McHugh Randy
Sent: Sunday, February 16, 2003 10:49
in many different areas of which be tested on the Lab. I really recommend
this book.BTW any one knows when the next edition of Bridges, Routers
and Switches by Caslow and CCI Practical Studies by Solie will be
available
Juan Blanco
of Space (Jokingnot complaining) Again, all I want to is to make
sure I am covering as much as I can.
Thanks, and as always your comments are appreciated...
Juan Blanco
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=62438t=62438
Correct me if I am wrong but according to the CCIE Blue Print IPX is still
on the lab, It is in the
section of Desktop Protocols
IPX (NLSP, IPX-RIP/SAP,IPX-EIGRP, SPX, NCP,IPXWAN,IPX Addressing, GNS)
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
The
Team,
For those of your trying to assign an Ip address to a virtual-tokenR, the
issue is more related to the IOS version, I just did a test in a few routers
and it works on version 12.0(9) on a 2500and in version 12.0(21) on a
2500 as well
Well, I least I could have it available in one of
of taking the test I recommend is the
following:
DQoS --- CVOICE --- CIPT
Good luck,
Juan Blanco
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Monday, January 27, 2003 11:12 AM
To: [EMAIL PROTECTED]
Subject: VO/IP Study [7:61957]
Guys
Tell me the best place
Thanks, I already got the same instructions from Brad Ellis and it is
already working on my laptop...
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of J
M
Sent: Wednesday, January 22, 2003 7:59 PM
To: [EMAIL PROTECTED]
Subject: RE: Call Manager 3.1
Team,
There is a way to assign an IP address to a Virtual Token Ring Interface. I
want to simulate some Token Ring Networks
Thanks,
Juan Blanco
The greatest glory in living lies not in never falling,
but in rising every
Hai
Why don't you reset the switch, Turn the switch off, press the button on the
front label MODE and turn the switch on and it will take you to the
reset/recovery mode and put everything back to the default mode
Juan
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL
for testing...
Thanks,
Juan Blanco
The greatest glory in living lies not in never falling,
but in rising every time we fall .
-- Nelson Mandela
Message
Juan Blanco
The greatest glory in living lies not in never falling,
but in rising every time we fall .
-- Nelson Mandela
Message Posted at:
http
Team,
I am looking for a Networking position in any of the following locations
NY/NJ/PHILADELPHIA/VIRGINIA. If anyone in these city is looking for a
Network Engineer please email me at [EMAIL PROTECTED] I apology for
using this avenue for job hunting.
Regards,
Juan Blanco
a happy holidays and a NEW YEAR to every one in this group.
Juan Blanco
Juan Blanco
The greatest glory in living lies not in never falling,
but in rising every time we fall .
-- Nelson Mandela
Serg
Congratulations, the most important thing is that you thanks the Lord, with
him we are nothing
Good luck in your next goal.
Juan Blanco
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Sergio Silva (ZA)
Sent: Friday, December 20, 2002 8:43 AM
with a PHD/MS.
Finally, I will say that any person should have a least BS, and then any
certification.particular a CCIE...I believe that CISCO has done a
great job with the CCIE program and they should continue to improve it for
the better.
Juan Blanco
with a PHD/MS.
Finally, I will say that any person should have a least BS, and then any
certification.particular a CCIE...I believe that CISCO has done a
great job with the CCIE program and they should continue to improve it for
the better.
Juan Blanco
/788/solution_guide/index.html
Cisco Web site is your best option, most books out there are really a copy
of many pdf's from Cisco
Juan Blanco
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
John Conzone
Sent: Thursday, December 19, 2002 9:04 AM
Steve,
The following will be a start for your goal..
CIPT 9E0-402
Cisco IP Telephony by ciscopress - David Lovell
Cisco IP Telephony Network Design Guide
http://www.cisco.com/univercd/cc/td/doc/product/voice/ip_tele/network/
Cisco IP Telephony Solution Guide
Cisco Systems Solution Showcase NYC 2003
-Original Message-
From: Cisco Systems Inc [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, December 17, 2002 4:29 PM
To: [EMAIL PROTECTED]
Subject: Solutions Showcase NYC - Save the Date!
Date Location:
Wednesday,
January
that failing is
another way of growingGood Luck Next Time...
Juan Blanco
The greatest glory in living lies not in never falling,
but in rising every time we fall .
-- Nelson Mandela
that failing is
another way of growingGood Luck Next Time...
Juan Blanco
The greatest glory in living lies not in never falling,
but in rising every time we fall .
-- Nelson Mandela
Juan Blanco
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
johnman johnman
Sent: Monday, December 02, 2002 4:02 PM
To: [EMAIL PROTECTED]
Subject: QOS on 40003 [7:58412]
I am configuring QOS for Video-Conference on my CAT 4003.
I would like to know what IP
Juan Blanco
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
johnman johnman
Sent: Monday, December 02, 2002 4:02 PM
To: [EMAIL PROTECTED]
Subject: QOS on 40003 [7:58412]
I am configuring QOS for Video-Conference on my CAT 4003.
I would like to know what IP
scenarios
and simulations in order for me to fully understand and learn IP Telephony
without having to practice on a live network.
Thanks,
Juan Blanco
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=57968t=57968
--
FAQ, list
Andrew
The following links will explain in full details how to accomplish what you
want
Juan Blanco
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/voice
_c/vcprt1/
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/mult
i_c/mcprt1/
http
.
Your input is very appreciated.
Thanks,
Juan Blanco
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=57558t=57558
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct
Neil,
I think that you can in fact connect a key sytem to a FXS port. If you have
the book
Cisco Voice Over Frame relay, ATM and IP in page 129 figure 5-13 it shows
the
connection of a a Key system via a FXS. Do a search on cisco web for Key
System and
you will see a few examples.
Juan Blanco
Michale,
That really hurts, I am sorry and don't give up you will do fine next time,
Sometime God test us
in many different ways that we can not explains, he works in a very strange
way. What bothers me
the most is the not apologies from Cisco.
Juan Blanco
-Original Message-
From
Michale,
That really hurts, I am sorry and don't give up you will do fine next time,
Sometime God test us
in many different ways that we can not explains, he works in a very strange
way. What bothers me
the most is the not apologies from Cisco.
Juan Blanco
-Original Message-
From
Pedro,
The following link will take you where you need to be (where no man have
gone before...)
Juan Blanco
-Original Message-
From: [EMAIL PROTECTED] [mailto:nobody;groupstudy.com]On Behalf Of
Pedro do Valle
Sent: Friday, November 08, 2002 9:44 AM
To: [EMAIL PROTECTED]
Subject: IOS
are using your free
time very wisely...
Juan Blanco
-Original Message-
From: [EMAIL PROTECTED] [mailto:nobody;groupstudy.com]On Behalf Of
[EMAIL PROTECTED]
Sent: Thursday, November 07, 2002 5:04 AM
To: [EMAIL PROTECTED]
Subject: Re: Multiple CCIE qualification exams then labs? [7:57019
are using your free
time very wisely...
Juan Blanco
-Original Message-
From: [EMAIL PROTECTED] [mailto:nobody;groupstudy.com]On Behalf Of
[EMAIL PROTECTED]
Sent: Thursday, November 07, 2002 5:04 AM
To: [EMAIL PROTECTED]
Subject: Re: Multiple CCIE qualification exams then labs? [7:57019
Maximums,
Classification is the ability to identify and group specific packets(source
and destination ip address..or
source and destination UDP port number). After the packet has been
classified then you Mark it by setting bits in the IP header(DSCP, IP
precedence.)
Juan Blanco
-Original
Chuck,
Great job, we all appreciate your valuable time on doing this homework
Keep it up and good luck in your coming LAB
Juan Blanco
-Original Message-
From: [EMAIL PROTECTED] [mailto:nobody;groupstudy.com]On Behalf Of
The Long and Winding Road
Sent: Sunday, November 03, 2002 2:39
/qosvoip.htm
http://www.cisco.com/warp/customer/788/voip/delay-details.html.
Juan Blanco
The greatest glory in living lies not in never falling,
but in rising every time we fall .
-- Nelson Mandela
Team,
I am looking to buy the DQoS course book, if any one is interested please
let me know.
Thanks,
JB
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=55050t=55050
--
FAQ, list archives, and subscription info:
Team,
I am looking to buy the DQoS course book, if any one is interested please
let me know.
Thanks,
JB
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=55054t=55054
--
FAQ, list archives, and subscription info:
Jim,
I try to replay back to you but I am getting the following message:
The message that you sent was undeliverable to the following:
[EMAIL PROTECTED] (Mail address access denied)
Possibly truncated original message follows:
If you get back to me with a valid e-mail address I really
Juan Blanco would like to recall the message, Message for
[EMAIL PROTECTED] (Jim).
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=55068t=55068
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list
a different approach.
Juan Blanco
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Garrett Allen
Sent: Wednesday, September 25, 2002 6:39 AM
To: [EMAIL PROTECTED]
Subject: Re: LAN Design [7:54023]
as a rule of thumb 10mbps ethernet to the user end station
Team,
Any one out there, are we alive, no messages in my inbox from this group
since yesterdayno goodvery scary..what is goin onnn
Juan Blanco
The greatest glory in living lies not in never falling
NVRAM administratively down
down
TokenRing0 unassigned YES NVRAM initializing
down
r3#
r3#
Thanks,
JB
Juan Blanco
The greatest glory in living lies not in never falling,
but in rising every time
was that the MAU was bad.
_
Priscilla Oppenheimer
www.troubleshootingnetworks.com
www.priscilla.com
Juan Blanco wrote:
Team,
Could any tell me what I am doing wrongI am trying to bring
up my
token-ring interface up? I connect the TR interface with a
Token Ring
4-16 - media
Team,
Correct me if I am wrong but by passing the CCIE R/S Qualifacations does not
upgrade
the CCNP certification status...
Juan
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Jim
Sent: Wednesday, September 11, 2002 1:17 AM
To: [EMAIL PROTECTED]
Cisco Nuts,
The Cat 3550 EMI L3 switch will be making its appearance in the CCIE lab in
October, and will become
THE L2 device in November
Juan Blanco
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Cisco Nuts
Sent: Wednesday, September 11, 2002 10:51
Team,
I just got a 3550 switch(current smi image), I am trying to put the new emi
image but I am getting the following error...What I am doing wrong
Switch#$downnload-sw tftp://192.149.64.17/c3550-i5q3l2-mz.121-11.EA1.bin
examining image...
Loading c3550-i5q3l2-mz.121-11.EA1.bin .from
Mark,
Connecting to the firewall from the outside was not allow in the old
versions, SSH will be the
correct solution...
Juan Blanco
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Mark W. Odette II
Sent: Friday, September 06, 2002 6:25 PM
To: [EMAIL
I total agree with you, to many sites, to many worries, to many
configurations..CA will be your answer
Juan Blanco
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Greg
Sent: Monday, September 02, 2002 9:44 AM
To: [EMAIL PROTECTED]
Subject: Re
Chuck,
You may have to reboot to monitor mode delete the file and tftp the new one,
I did have the same problem
with a two old 2500r
Juan Blanco
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Chuck's Long Road
Sent: Sunday, September 01, 2002 4:01 PM
Team,
The Ciscopress CSIDS book is the recommended for test 9E0-572 IDSPM. What
material or book is recommended for test 9E0-558 CSIDS
Thanks,
Juan
Juan Blanco
The greatest glory in living lies not in never falling
The same thing from here, if you can't find it, I could send you one as
well.
Juan Blanco
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Marc Russell
Sent: Friday, August 30, 2002 9:32 AM
To: [EMAIL PROTECTED]
Subject: Re: Looking for Memory [7:52033
Yes, normal Ethernet straight-through cables
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
H.
Sent: Thursday, August 29, 2002 10:57 AM
To: [EMAIL PROTECTED]
Subject: Re: Help needed on Simline 2 ISDN Simulator [7:52255]
Hello Brad,
Ethernet
example is available in the book Managing Cisco Network Security.
Thanks,
Juan Blanco
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
John Brandis
Sent: Monday, August 26, 2002 1:08 AM
To: [EMAIL PROTECTED]
Subject: Security Policy [7:52061]
Hi All,
does
Team,
Make me an offer that I can't refuse. I am willing to exchange it for a pix
firewall as well..
Thanks,
JB
This base unit of the Firebox II family offers the processing power to meet
the needs of most small to medium-sized organizations.
Manufacturer: WatchGuard
Model Number: FireBox
Yes,
You need to make sure that port 50, 51 and udp 500 are open in the two
ends-points
JB
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Leonardo Borda
Sent: Tuesday, August 20, 2002 8:20 AM
To: [EMAIL PROTECTED]
Subject: IPSEC Ports [7:51732]
Does
Does the following is still available:
For a limited time, candidates holding an active CCNP Security
Specialization may obtain a Cisco Security Specialist 1 certification by
passing the 9E0-571 CSPFA and 9E0-570 CSVPN exams.
Thanks,
Message Posted at:
put the following:
Cisco Certified Network Professional - Voice Specialization (CVOICE)
I have seem some people that they have on their resume CSS1 (how do you
translate this symbol) - Does it means a person
that took the four security test.
Thanks,
Juan Blanco
Team,
Do you happen to know any new book for the lab which already cover the 3550
switch on full detail and not the 5000.
Thanks,
Juan Blanco
The greatest glory in living lies not in never falling,
but in rising every time
Elijah,
If you have the following book Cisco Secure Pix Firewall, in appendix A you
can find
how to implement IDS in your firewall.
Juan Blanco
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Elijah Savage III
Sent: Tuesday, August 13, 2002 10:46 AM
Team,
I have the following items available, Make me an offer that I can not
refuse.
2 WIC-1B-U
1 WIC-1DSU-T1
1 FE-TX (10/100 Ethernet)
Thanks,
Juan Blanco
The greatest glory in living lies not in never falling
)
Configuration register is 0x2102
Router#
Thanks,
Juan Blanco
The greatest glory in living lies not in never falling,
but in rising every time we fall .
-- Nelson Mandela
configuration memory.
16384K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
Again, I am using the default configuration on the simulator, except for the
switch-type. What I am doing wrong here.
Thanks for your help..
Juan Blanco
Actually I just put 32mg from Compaq on my 3600r and it works fine to
Juan
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Symon Thurlow
Sent: Saturday, August 03, 2002 4:04 AM
To: [EMAIL PROTECTED]
Subject: RE: DRAM for 2500 series [7:50572]
I
www.memorydealers.com
They have a very good price and very reliabletake a look...
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Phil Lorenz
Sent: Friday, August 02, 2002 6:42 PM
To: [EMAIL PROTECTED]
Subject: RE: 2501 IOS Flash! [7:50512]
I've
Reza,
The written is all you have to take to keep your CCIE's status valid.
Juan B
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Reza
Sent: Thursday, August 01, 2002 9:45 AM
To: [EMAIL PROTECTED]
Subject: CCIE Recertification [7:50372]
Hello Group,
I
one
offered byTeltone, Atlas. Will this simulator will be sufficient for all my
labs simulations
Arca(emutel).
Thanks,
Juan Blanco
The greatest glory in living lies not in never falling,
but in rising every time we
and then hands-on on he
lab in the evening. Don't lost contact with this group there is no other
place like this (My thanks to every one on this group)..It can be done,
others had done it, it just require dedication and sacrifices.
Good luck and God Bless us all..
Juan Blanco
-Original
I will buy two right nowLOL.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Dennis Laganiere
Sent: Tuesday, July 30, 2002 4:39 PM
To: [EMAIL PROTECTED]
Subject: Re: 3550 EMI [7:50103]
Put me down for two...
--- Dennis
- Original Message
-Original Message-
From: Kaminski, Shawn G [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, July 30, 2002 7:26 PM
To: 'Juan Blanco'; [EMAIL PROTECTED]
Subject: RE: 3550 EMI [7:50103]
Juan,
Better check with the wife first! :-)
Shawn K.
-Original Message-
From: Juan Blanco [SMTP
Team,
Which book are you guys using to study for the Voice Over Frame Relay, ATM,
and IP Exam(9e0-423).
Thanks,
Juan Blanco
The greatest glory in living lies not in never falling,
but in rising every time we fall
Jeff,
Give us a break, on this group we are very negative to this type of
behaviors, I just went and spent $120 in two books, I did not go to the
movies, I did not go outI just went and bought the books because I need
them, like myself most of the people in this group do the same thing, they
Team,
Which book are you guys using to study for the Voice Over Frame Relay, ATM,
and IP Exam(9e0-423).
Thanks,
Juan Blanco
The greatest glory in living lies not in never falling,
but in rising every time we fall
Brian,
By any chances the one that you are talking about is the following:
Integrating Voice and Data Networks (ciscopress, Scott Keagy). Because I
bought it
this morning.
Thanks,
Juan Blanco
-Original Message-
From: Brian Hartsfield [mailto:[EMAIL PROTECTED]]
Sent: Monday, July 29
Team,
For those security people on the Cisco World, Normally which interface do
you use the most, the CLI or the PDM. I am in the process of setting up
standards and we would like to define one for having access to our Pix.
Thanks,
Juan Blanco
Well, you can use ACS or a Radius Server, ACS is great, it give you a lot of
options of how to control access to your equipment, you can use it's own
database for users, or you can integrate it with Windows NT... That is what
most ISP use, you can have it in Solaris or NT...I think Cisco can
The command is show controllers..or show controllers serial 0..or
show controllers serial 1
It will tell you a the beging if your end is a DTE or a DCE
JB
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
John Brandis
Sent: Thursday, July 25, 2002
Team,
The way I see it, dhcp on the firewall is only for small number of users,
when it comes to mid-size-up network you don't want to use a firewall for a
DHCPCan you see an NT administrator making changes in your firewall
because he/she is having problems with DHCP(This network will be
Hey guys, Actually I have the same dilemma with my 5500, Should I sell it in
order for me to get 3500 or should I keep
it in order for me to be able to build different scenarios.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Thursday, July 18, 2002 9:59
Team,
I just got my new baby Pix 501 (wow...how small it is, it looks like a
toy)Below is my configuration, my problem is that Pat does not seems to
be able to work, I have cable-modem and they only provided one ip, I am able
to ping from the firewall to any pc on my LAN, I am able to ping
Team,
Correct if I am wrong, but I don't have to have 64meg on my 2600/3600
routers to support VoIPThis requirement is only for the mc3810 correct
Thanks,
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Thursday, July 11, 2002 10:20 AM
To: [EMAIL
1 - 100 of 189 matches
Mail list logo