indeed with L3 switching, we can more closely arrive at wire speed, but in
the course of my practice, i seen L3 switches mainly interconnecting Lan's,
yes a flexwan modul exists to interconnect wan's on the same box but usually
we like to separate the lan's from wans for the sack of issolation and
u can use MQC to that and more.
a icrit dans le message de news:
[EMAIL PROTECTED]
Look at CAR
Router Kid @groupstudy.com em 10/02/2003 08:22:44
Favor responder a Router Kid
Enviado Por: [EMAIL PROTECTED]
Para: [EMAIL PROTECTED]
cc:
Assunto:E3 bandwidth issue.
big word...too big for a mortal.
Sam Sneed a icrit dans le message de news:
[EMAIL PROTECTED]
No, its because Gary Crouch is god.
Disclaimer:
This wise ass comment will be ironically punished with another autoreply
from Gary Crouch.
Symon Thurlow wrote in message
[EMAIL
actually rip is faster than IGRP
[EMAIL PROTECTED] (Kaj J. Niemi) a icrit dans le
message de news: [EMAIL PROTECTED]
In mail.net.groupstudy.pro, you wrote:
been very easy to configured and very fast converged comparing to
RIP/RIPv2.
Anything is fast compared to RIP/RIPv2 ;-)
It
make sure the router has no issues dialing the other end, add a dialer map
to the 4000 with a the broadcast keyword, i think it should do it.
Nelson Herron a icrit dans le message de news:
[EMAIL PROTECTED]
Of course I had to copy the wrong log file up yesterday (02/04/03 -
recorded
as
every time i reply to a question, the message is automatically sent to Gary
Crouch.
Moderator do u know why??
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=62655t=62655
--
FAQ, list archives, and subscription info:
u'd have to set a static route out to the internet, unless if u have bgp but
it didn't sound like it.
Priscilla Oppenheimer a icrit dans le message de
news: [EMAIL PROTECTED]
hanan wrote:
Hello
Thank for your reply
Do I need to create route redistribution in my ASBR router?
As I said
I'd check the isdn stuf, deb dialer, deb isdn q931, etc...
DW a icrit dans le message de news:
[EMAIL PROTECTED]
When the primary is up the route table shows:
192.1.1.0/24 is variably subnetted, 2 subnets, 2 masks
S 192.1.1.0/24 is directly connected, Serial0/0:1
C
i had proper behavior on a PA-A3-E3 configured with OAM support.
Elaluf Silvia a icrit dans le message de news:
[EMAIL PROTECTED]
Hi Guys,
I am not an ATM Expert and I need a proper explanation of why when in a
CISCO router with an ATM interface, if there is multiple subinterfaces and
one
OSPF
no hop limit
link state
have 2 know how to configure it
bandwith is the metric
supportes areas therefore scalls well
supports area and net summarization
supportes cidr, vlsm
fast to converge
supports demand cicuits
standard based
djikstra is the algo
used in large environments
EIGRP
advanced
look at the carrier transitions
do a debug frame-relay lmi
Dain Deutschman a icrit dans le message de news:
[EMAIL PROTECTED]
Hi all,
I have a Frame Relay circuit to an adtran ts120 and then v.35 to a
cisco1721. My serial interface keeps flapping
01:11:40: Serial0: attempting to restart
if u do dual redistribution, and u don't watch after the nets redistributed
into is-is from being redistributed back to rip then u'll have problems.
Cisco Nuts a icrit dans le message de news:
[EMAIL PROTECTED]
Hello,
Just stumbled upon this on Rip to Isis redistribution?
If the source
0a997d.shtml
Firesox a icrit dans le message de news:
[EMAIL PROTECTED]
Folks I am a little stuck in IRB config.
I have two 2620 routers connected via T1.
I would llike to route IP and bridge IPX.
On the routed IP network I need to run OSPF to connect to other networks.
I am looking for a
cont e1 0/0
framing crc4 | no-crc4
linecode hdb3
clock source line primary [is u have a 7000 and multiple E1's, the other
will be secondary]
line primary [if u have a 3600, 4000, AS5000, all other ports will
secondary]
pri-group timeslots 1-31 [if u want to use it all]
int se 0/0:15
I wouldn't even think about it, Solaris.RULES.
HulaJoe a icrit dans le message de news:
[EMAIL PROTECTED]
One more thing - Is anyone running the latest version of the LMS suite on
an
Ultra-II ?
I have a choice between an Ultra-II with dual 166Mhz, 512Mb RAM, or a Dell
2400 with Dual
hi
it is nothing like HSRP, even if looked @ from the virtual IP point of view,
for the simple reason that HSRP elects one active router and only router is
active @ any time, (as opossed to TCP load Balacing, that uses all the ip's
of the servers to forward data to) and the real ip of the active
actually FRF.16.1, will not suport ISDN interfaces or any virtual interface
for that matter, also because of the latency introduced when having
different bundle links of differing speeds, it's recommended to use links of
the same speed.
of course the router must be a 2600 and up, with 12.2.(8)T if
Web server farm for ur ebiz site,
u assign private address to the servers, and use only one public ip to
access them all.
Peter P a icrit dans le message de news:
[EMAIL PROTECTED]
Thanks for that. Is my 'real world' example right in broad conception ?
Message Posted at:
,
Juntao a icrit dans le message de news:
[EMAIL PROTECTED]
Web server farm for ur ebiz site,
u assign private address to the servers, and use only one public ip to
access them all.
Peter P a icrit dans le message de news:
[EMAIL PROTECTED]
Thanks for that. Is my 'real world' example right
Cisco Internetwork Operating System Software
IOS (tm) 2500 Software (C2500-D-L), Version 12.0(21), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2001 by cisco Systems, Inc.
Compiled Mon 31-Dec-01 18:25 by nmasa
Image text-base: 0x03038AE4, data-base: 0x1000
ROM: System Bootstrap, Version
from what i've seen in enterprises, the trend seems to be going towards P2P
with sub interfaces and ip unnumbered when needed, as it implies some
trouble shooting constraints.
i'm sure u know the issues that imply when using P2M(spilt horizon must be
disabled, if your using EIGRP the bandwith
the benefits of P2P with subints.
u know sub ints came as another resolution to the issues of P2M.
Simmi Singla a icrit dans le message de news:
[EMAIL PROTECTED]
Hi Juntao,
Thanx for the input,
what about the existing Frame-relay networks u mean to say that they will
be
migrating to point-point sub
From what i can find, you will need to configure the interface as an NNI,
and then you frame-relay switch between 2 pvc you have on the router.
the problem is that subinterfaces are not supported by an NNI interface.
it can only be implemented on the main interface
so u will need 2 serial
Juntao a icrit dans le message de news:
[EMAIL PROTECTED]
From what i can find, you will need to configure the interface as an NNI,
and then you frame-relay switch between 2 pvc you have on the router.
the problem is that subinterfaces are not supported by an NNI interface.
it can only
u'r talking about nt4 login passwords, the SAM database?
lophtcrack works, it takes a long time though
systernals has tools to login to the box, and change things.
u can also change cmd.exe to the default screen savec name, the command line
will pope up after a while, after reboot.
and change the
here is the relative info from rfc 1247
3,4Summary link Originated by area border routers, and
advs. flooded throughout their associated
area. Each summary link
advertisement
i know of the following rules, that governs the configuration management
options available to u:
if you copy from RAM to NVRAM or TFTP, u are overwriting the configs
if you copy from NVRAM to RAM, u r merging configs
if you copy from NVRAM to TFTP, u r overwriting.
if you copy from TFTP to RAM, u
u can use cisco encapsulation for cisco routers and ietf for all others.
what encapsulation is to be configured on the main interface depends on how
many non-cisco and cisco routers u have.
if you have, say, 7 cisco and 3 non cisco, u can use cisco encapsulation on
the main interface and then
priority queuing will do the job.
watch for delay sensitive traffic ...
Frederico Madeira a icrit dans le
message de news: [EMAIL PROTECTED]
How i give max priority to traffic on port 1050 ??
Frederico Madeira
Coordenador de Suporte
N. Landim Comircio Ltda
PABX: 81. 3497.3029
e-mail:
surely you know this.
u can see some fields with the below commands.
debug isdn q921
debug isdn q931
a icrit dans le message de news:
[EMAIL PROTECTED]
Good morning all :)
Has anyone ever done this, and how can you do it?
I would like to see Q.921 and Q.931 frames/formats and look at the
all ports share a 16MB buffer space. (4000 docs)
for ethernet interfaces, i only found a generic allocation of ether and fast
ethr blades, 192KB per interface, 160 for outboud and 24 for inbound, but i
found this info in the (5000 docs), they made it sound like it's generic to
ethernet but i'm not
31 matches
Mail list logo