Hello all
Can I know what is the Cisco PIX and that of a Cisco
VPN 3000 in terms of performance?
As I am planning to implement VPN with either VPN
Concentrator or PIX,however I was told that if you
implement only VPN Concentrator instead of PIX ,then
you may get VPN connectivity but you will not be
Hello
SOunds to be a silly question,but I want to know the
basic difference between 100baseT and 100BaseTx.
Same applies to even 10baset ,10BaseTx also
Thanks in advance.
Piyush
Yahoo! India Promos: Win TVs, Bikes, DVD play
Hello
SOunds to be a silly question,but I want to know the
basic difference between 100baseT and 100BaseTx.
Same applies to even 10baset ,10BaseTx also
Thanks in advance.
Piyush
Yahoo! India Promos: Win TVs, Bikes, DVD play
Dear all
Recently there was an article on Cisco Security
Advisory which stated that all Cisco routers/switches
having IOS as their operating system,their Interfaces
will be blocked by IPv4 Packets.In this regard,i have
a querry.
Is it that all the router having IOS will be blocked
or certain specif
Dear all
Recently there was an article on Cisco Security
Advisory which stated that all Cisco routers/switches
having IOS as their operating system,their Interfaces
will be blocked by IPv4 Packets.In this regard,i have
a querry.
Is it that all the router having IOS will be blocked
or certain specif
Recently there was an article on Cisco Security
Advisory which stated that all Cisco routers/switches
having IOS as their operating system,their Interfaces
will be blocked by IPv4 Packets.In this regard,i have
a querry.
Is it that all the router having IOS will be blocked
or certain specific IOS ?
boot" aborted due to exception
rommon 4 >
--- Gary Crouch wrote: > if
you have a flash card remove and reseat it.
>
> >>> "Mr piyush shah"
> 07/29/03 04:33AM >>>
> Hi all
> I have Cisco 1603 router with 1 Ethernet,1 port BRI
> plus 1 T
Hi all
I have Cisco 1603 router with 1 Ethernet,1 port BRI
plus 1 T Serial interface which I was using to
connect 2 Mbps Leased line .Receptly it started
malfunctining with coutinious boot .The error ***BUS
ERROR*** .The log captured on console is attached
herewith .Can anybody pls help whether wh
Hi all
I have Cisco 1603 router with 1 Ethernet,1 port BRI
plus 1 T Serial interface which I was using to
connect 2 Mbps Leased line .Receptly it started
malfunctining with coutinious boot .The error ***BUS
ERROR*** .The log captured on console is attached
herewith .Can anybody pls help whether wh
Rohit ,
cisco version of radius is termed as TACACS Server.
It has the capability of any login users to provide
authentication,authorisation as well as accounting.
Means if the user coming in for logon needs to be a
part of cisco database with necessary password. Also
upon sucessful login cisco ser
Rohit ,
cisco version of radius is termed as TACACS Server.
It has the capability of any login users to provide
authentication,authorisation as well as accounting.
Means if the user coming in for logon needs to be a
part of cisco database with necessary password. Also
upon sucessful login cisco ser
Hello
Can somebody suggest a nice book on SNMP ?
tHANKS IN ADVANCE.
Send free SMS using the Yahoo! Messenger. Go to
http://in.mobile.yahoo.com/new/pc/
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=724
At the source end , if i observed traffic on tunnel, it was 1.5mb . But at
the
other end , it was zero.There was no incoming traffic. As i said earlier ,
its not a point to point connection ans involves multiple transit routers on
the way.
R1 --- SP1 ---SP2---R2
TSTD
Thanks for your config. But would be ideal if you can send me a config when
there is no pt-2-pt link.
Rgds
- Original Message -
From: alaerte Vidali
To: [EMAIL PROTECTED]
Sent: Thursday, July 17, 2003 1:25 AM
Subject: RE: Multicasting [7:72403]
I have configured it same tim
from your computer.
-Original Message-
From: MR [mailto:[EMAIL PROTECTED]
Sent: Wednesday, July 16, 2003 12:23 PM
To: [EMAIL PROTECTED]
Subject: Multicasting [7:72403]
Hi,
This is on multicasting. We are trying to setup a muticasted n/w on GRE
tunnel
with mutilple transi
Hello
Can somebody suggest a nice book on SNMP ?
tHANKS IN ADVANCE.
Send free SMS using the Yahoo! Messenger. Go to
http://in.mobile.yahoo.com/new/pc/
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=724
Hi,
This is on multicasting. We are trying to setup a muticasted n/w on GRE
tunnel
with mutilple transit routers. We have enabled muticast only in the end
routers i.e tunnel source/destination routers. IGMP too has been enabled with
a group being formed.
Though we were able to successfully carry
Hi all
I am planning to appear for CCSP EXAMS .May I request
people from Mumbai ,India to have off-line discussion
to have joint efforts.This will help us in sharing
idea ,study material etc.Interested people can email
me offline on [EMAIL PROTECTED] .
Thanks in davance .
Piyush
Hi all
I am planning to appear for CCSP EXAMS .May I request
people from Mumbai ,India to have off-line discussion
to have joint efforts.This will help us in sharing
idea ,study material etc.Interested people can email
me offline on [EMAIL PROTECTED] .
Thanks in davance .
Piyush
Dear all
I am having 128 kbps Leased Line with ISDN backup.As
the Link goes Down ,ISDN should trigger,however in my
case the ISDN link does not come up and goes to
deactivated mode.What could be the problem .I have
seen that upon removing the ISDN link and inserting
back it gives the status as ACTI
Dear all
I am having 128 kbps Leased Line with ISDN backup.As
the Link goes Down ,ISDN should trigger,however in my
case the ISDN link does not come up and goes to
deactivated mode.What could be the problem .I have
seen that upon removing the ISDN link and inserting
back it gives the status as ACTI
Dear all
We have a currently instally installed MS Proxy ser
2.0 .All the users use it to acess internet such as
HTTP ,FTP acess through it. I have a strange problem
.My users on LAN are able to do FTP through proxy
however my users those acess through Fibre optic are
able to acess http but not ftp
Hello all
I will be highly appreciable if someone will help
me.In our organisation there is a newly joineD to whom
we have provided internet access through proxy server
.However being slightly technical he has insistently
taken public Ip address and have opened all the ports
on firewall ,wherein fr
hello all
I have cisco router,router A with multiple WAN links
connected to it. on this LAN we have checkpoint f/w
having default route pointing to internet router .
The default route on router A points to ethernet ip
add of f/w. However I cannot ping from router
tofirewall (the ethernet of f/w)
I
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]] On Behalf Of
> Mr piyush shah
> Sent: Wednesday, January 22, 2003 12:23 AM
> To: [EMAIL PROTECTED]
> Subject: Re: Automatic copying of the configuration
> scheduling [7:61538]
>
>
> Dear all
> I have been assign
Dear all
I have been assigned the task of copying a series of
configurations in a router on a daily basis .I am
tired of giving copy startup-config tftp command in
each router . I was wondering if is there any way
wherein we can automate this i.e copy startup-config
tftp will run in each riuter aut
Dear all
I have been assigned the task of copying a series of
configurations in a router on a daily basis .I am
tired of giving copy startup-config tftp command in
each router . I was wondering if is there any way
wherein we can automate this i.e copy startup-config
tftp will run in each riuter aut
issions on the web server(unix)..
>
> HTH
>
> steve
>
>
>
>
> - Original Message -
> From: "Mr piyush shah"
> To:
> Sent: Wednesday, January 08, 2003 10:12 AM
> Subject: RE: problems while acessing Ciscoworks 2000
> [7:60285]
>
>
&
as solved by this way
> as it's mainly
> related with the browser
>
> Amr
>
>-Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]] On Behalf Of
> Mr piyush shah
> Sent: Saturday, January 04, 2003 11:14 AM
> To: [EMAIL PROTECTED]
&
04, 2003 1:07 PM
> To: [EMAIL PROTECTED]
> Subject: RE: problems while acessing Ciscoworks 2000
> [7:60285]
>
>
> Piyush
>
> Check the permissions for the user you logged on
> with to the ciscoworks
> And check the java settings in the web browser too I
> have p
I thing now everybody got the message that B.S or M.S
is superior than CCIE so just shut your mouths on this
topic and concentrate on many more issue.We have lot
many to discuss.
Piyush
--- Peri Sophos wrote: >
VERY HARD to believe that , maybe his father runs
> the testing centre :)
>
> -Or
Symon
I totally agree with you.Let them continue
Piyush
--- Symon Thurlow wrote: >
Yawn. Isn't this thread finished yet?
>
> -Original Message-
> From: Howard C. Berkowitz [mailto:[EMAIL PROTECTED]]
> Sent: 05 January 2003 04:33
> To: [EMAIL PROTECTED]
> Subject: Re: CCIE Vs. BS o
Hi all
I have windows2000 suite of NMS.I have installed CD1
with version 4 .Now that I can acess the same locally
,while When I am trying to acess ciscoview through web
using port 1741 on other pC,I am getting the error
Please grant the permission to acess Ciscoview.I
wonder whether where should I
2003 04:29:54 + (GMT)
From: =?iso-8859-1?q?Mr=20piyush=20shah?=
Subject: Fwd: Re: CCIE Vs. BS or MS dergree [7:59481]
To: [EMAIL PROTECTED]
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 8bit
Content-Length: 1803
X-Converted-To-Plain-
Dear friends
It has been quite long that I have been hearing
whether CCIE is superior or MS. I thing it is high
time we should wrap the topic.I dont understand
,whether why this forum for ? It should b a purely
technical. For a typically type of questioning like
this, there are resposes which lasts
Dear all
I am trying to connect to microsoftRadius server using
windows2000 server,wherein i am enabling Internet
Authentication Server ,with configuration of of RADIUS
CLIENT with port no.1645 for authentication.I have
also configuraed cisco router 1750 as radius client to
authenticate telnet form
Hey
I am configuring Cisco router 1750 with Radius
,wherein I am making windows 2000 to work as RADIUS
SERVER. I am trying to telnet the router with
authentication via RADIUS SERVER.What should be the
configuation of router for this ?Also what additional
configuration to be done on Windows 2000. P
Piscilla
what apart from Elijah's BSD firewall one can use if
he does not have UNIX based machines in his setup ?
Pls advice
Piyush
--- Priscilla Oppenheimer
wrote: > MADMAN wrote:
> >
> > money no object, hardware based
> >
> > money an object, CBAC works well
> >
> > no moe money, ACL
teh hardest? really? hm... I found it the easiest and routing the
hardest. Anybody else?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=57794&t=57741
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/c
I do not think it is turned on by default. ip multicast-routing is the
command to crank it up. by default, it will be sent out of all ports on
your Cats. We are using igmp snooping here. It is better than cgmp. We
once opened up a ticket to understand the difference.
Message Posted at:
http:
Hi all
I am trying to connect Cisco PIX 515 via PPTP using
Windows98's Microsoft VPN Adaptor ,but I am unable top
get though.When I am trying to ping PIX firewall ,I am
able to ping,but vpn tunnel is not getting established
.What could be the problem ?
When I am trying to form a PPTP VPN tunnel t
Dear ALL
Can I get the technical comarisions between CISCO PIX
515 , VPN Concentrator 3000 and Checkpoint cp2000 .
I would like to know technical comparisions.Any help
will be highly appriciated.Thanks in aDVANCE
Missed yo
Dear ALL
Can I get the technical comarisions between CISCO PIX
515 , VPN Concentrator 3000 and Checkpoint cp2000 .
I would like to know technical comparisions.Any help
will be highly appriciated.Thanks in aDVANCE
Regards
Piyush
__
wow... Thank you. I am going to upgrade it, see what happens and if the
problem still persists, I will paste this in over the weekend and post what
happens.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=56944&t=56906
--
FAQ, list
Does anybody know of a good white paper on buffer tuning? I have read a
couple of generic ones on Cisco's website, yet they are not
good enough to satisfy what I need to know. Called TAC - not a whole
lot of help this time! As you can see, there are a lot of misses on
medium and middle buffers.
Mr. Paul
Thanks for answer.In connection with this there is one
more querry which I would like to get clarify on..
Is there any software download using which I can see
whether who is chatting ? Can you pls let me know the
ulitity which does this ?
Thank again
Piyush
Note: forwarded message
Hi all
I am network administrator and in our network there
are people who use Yahoo messangers.I have few
querries pertaining to this as under.
1. Is there any tool by which I can see whether who is
chating ?
2. Can I see the content of his chating using that
tool ?
3. If I want to block this yaho
I have Cisco Secure ACS installed on Windows2000
Server.I have tried using the same for TACACS+ Server
wherein on a router Ihave made the entries such as
under.
aaa new-model
aaa authentication login group1 group tacacs+
aaa authentication ppp default group tacacs+
aaa authentication ppp group1 gr
I have Cisco Secure ACS installed on Windows2000
Server.I have tried using the same for TACACS+ Server
wherein on a router Ihave made the entries such as
under.
aaa new-model
aaa authentication login group1 group tacacs+
aaa authentication ppp default group tacacs+
aaa authentication ppp group1 gr
I have Cisco Secure ACS installed on Windows2000
Server.I have tried using the same for TACACS+ Server
wherein on a router Ihave made the entries such as
under.
aaa new-model
aaa authentication login group1 group tacacs+
aaa authentication ppp default group tacacs+
aaa authentication ppp group1 gr
Hi all
I have CiscoSecure ACS 3.0 installed on Win2000 server
for AAA. The router is 2611 acting as AAA Client .The
clent is being authenticated but the moment I
configured it for Authorisation,the authentication
fails.What could be the problem .I am forwarding
herewith the configuration as under.
cir=the average rate you want to transmit at in periods of non-congestion.
mincir=the minimum amount the telco will commit to transmit during the
periods of congestion.
usually mincir=cir/2
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=55224&t=55223
-
Those who are just finding out are already late. The last date to sign up
for 603 was September 13 (fact that I discovered 3 weeks ago when I went to
take the exam). But IS-IS is not bad at all - I just passed the BSCI test
yesteday.
Message Posted at:
http://www.groupstudy.com/form/read.php?f
Hello all
I am having CiscoSecure ACS ver.3.0 which I am
planning to configure for Authentication,I have also
created users on ACS server but the users created are
unable to logon to routers as they get the message
authentication failed. I am using Cisco 2600 router
having IOS 12.0(7)T.
I am forw
Hi all,
I am implementing Network management System such as
Whatsup Gols. I have also implementated syslog
server.I am planning to implement SNMP server which
will collect all traps . Is there any utility on net
whcih I can use ? Any help will be highly appreciated.
Thanks in advance.
regards
___
Hello all
I am using Whatsup gold as Network Management system .
Now I want to collect the data on syslog server which
is freeware.Can anybody suggest me some syslog
servers. I tried Kiwi syslog Daemon ,but is there
anything better than it ?
Thanks in advance ...
Piyush
__
Does anybody have Cisco ACS? I would like to have
evaualtion copy of the same as I am doing the testing
for authentication. pls send me if you the URL about
the availability
Parag
Want to sell your car? advertise on Yahoo Au
Hi all
I am trying to configure fastetherchannel using Cisco
2924 MXL switch and Extreme Networks Summit 48 Switch
. I configured fastethernet 0/1 through 0/4 using
commands
port group 1
switchport mode trunk
Also on Summit 48 switch I am using Enable
enable sharing grouping command.
Wher
Dear all
I am planning to appear for CCIP security exams and I
am going through this study group regularly . In the
security exams I need a help from you all. In the
company where I am working we have Checkpoint f/w
hence I can't do any hands-on practice for PIX
Firewall . My sincere request you
5/30/2002 10:45pm Thursday
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=45491&t=45491
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to
4/27/20028:30pm Saturday
Professionals,
I have a 4000-M router with 12.1.14 Enterprise+
It is populated as follows -
dual token ring, dual ethernet, quad serial
All interfaces are in use except S1 & S2
Until a few hours ago each token ring interface was connected a different
SynOptics Latt
4/6/2002 8:15am Saturday
I have two 4000 routers with HSSI cards. Is there a way to set up a
crossover connection between them (no MUX) ?
I realize this would be a special cable.
Thanks,
Richard (not a Jedi yet)
//
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=40
Hi all,
I have a small querry ,
Yesterday I was trying add 1T WIC card on My cisco
3640 router. Upon adding when I booted the router that
card was not identified by the router . The same thing
was with cisco3620 router. To my surprise the same
card worked fine with cisco 2600 series router. Why i
Hello Guys,
I am preparing for Cisco Exams I heard that the exam
Fees for Cisco CCNP exam is going to rise. Can I know
whether w.e.f when isit going to rise and how much ?
Currently it is Rs. 7000/- Approx. Since I am from
India ,I would like to know whether will it be
applicable in India ?
You may want to go to Agilent.com. They have a software version of their
Agilent Advisor hardware box. Its called Advisor Software SW edition. You
can run the 30day demo and see if you like it. In addition, you can buy just
the testing modual you need. (or if you are a valid educational user - the
"Agilent.com" has a software version of their Advisor hardware box.
You can try the 45day trial of Advisor Software (SW) edition for free. If
you like, you can buy just the parts you need. (Or if you are and
educational facility - The full version is FREE)
Later
Message Posted at:
http://www.gro
Hello all
and wish u happy new year.
I am new to this group I am facing a problem currently
and might be even silly to you all experts. I have
3640 router connected to one of our other office via
ISDN I can ping the next routers bri port but I am
unable to ping my own bri port. why is it so ?
thx
12/24/2001 5:35pm Monday
Well said
- Original Message -
From: ""Mike""
Newsgroups: groupstudy.cisco
Sent: Monday, December 24, 2001 5:35 PM
Subject: Re: IP classless command [7:30056]
> The best way to explain IP classless is to explain how a router works with
> "no ip classless".
What are the consequences of not turning on the keepalives on a token ring
router? Do you have to do anything special to insert it into the ring.
Thank you in advance for your help.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=27546&t=27546
---
11/14/2001 7:22pm Wednesday
Professionals,
The router name is area zero but it actually has six serial interfaces that
are in six different areas.
Each serial interface in connected to a 2501.
I am trying to run all six areas on the 2600.
I am most of the way there. I think I need to add "OS
I want to thank everyone for the prompt and courteous answers. I really
apprecaite the you insights and thoughts.
Take Care,
LJ
""Larry Johnson"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I have client that will not take no for answer.
>
> He feels that the using Config
Hi group,
Who have used the 'standby track serial 0' command
before, while configuring HSRP.
I tried it and was disappointed because, my two
upstream providers are connected via a radio
(microwave link). Even when one of them is down, the
radio coneected to the router still send keepalives to
t
Hi group,
Who have used the 'standby track serial 0' command
before, while configuring HSRP.
I tried it and was disappointed because, my two
upstream providers are connected via a radio
(microwave link). Even when one of them is down, the
radio coneected to the router still send keepalives to
t
CONGRATS!!
""Sundar Palaniappan"" I passed CCIE written on 9/17 with a score of 74.
>
> Thanks to all the members of this technical newsgroup and groupstudy.com
for
> all the help.
>
> I used the following to prepare:
>
> Bruce Calsow
> CCIE Exam
> Lou Rossi's TR White Paper
> Boson Exam
Who know alertpage, Tivolo and aprisma specturm ?
Any URLs show more comparsion, Pros and Cons of them ?
Thank you very much for helping!! :)
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=20786&t=20786
--
FAQ, list archives,
Anyone know any URL have white paper/discussion of network management tools
such as Tivolo , Ciscoworks, HP Openview (NM), Netmetrix, alertpage,
Spectrum ?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=20704&t=20704
--
FAQ, lis
complish.
I have no idea
> what Cabletron has to offer, but HP OpenView and CiscoWorks2000 are
> entirely different products and are useful in different ways.
>
> What tools do you want or need?
>
> >>> "Mr. Monitor" 9/19/01 9:37:43 AM >>>
> Dear
Dears..
Who know which one is the best ?
Which one is the best tools?
Thank you very much!
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=20406&t=20406
--
FAQ, list archives, and subscription info: http://www.groupstudy.co
I need help finding out what the TCP Push bit is. Would you please help me
with a source?
Thank you in advance for your help.
Mr. Laughs
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=20396&t=20396
--
FAQ, list archi
Hi all,
first let me pay tribute to my numerous Networking
colleagues, who lost their life while in active
service at WTC and Pentagon that fatefull Tuesday and
may God grant their love ones in this group the
courage to bear the lost. I stand with the popular
side 'Terrorism must be completely st
Hi,
I have a 2621 router with 8M flash and 32M Ram. I
inserted a network module with 1 ethernet port into
it, the IOS 12.0 did not recognize it. It only sees
the FastEthernet ports that came with the router.
Upgrading the memory to 64M did not help issues,
Changing the module with two other once
Hi group,
Just wondering how good the boson test would be in
preparation for my CID exam?
Any one with valuable clue and other exam last minute
advice please you 2 cent is welcome.
Regards.
Oletu
__
Do You Yahoo!?
Get email alerts & NEW webcam vi
Hi group,
Am bill to write my CID exam in 4 days time, am using
the cisco press book. However, the book did not give
stratacom switches any treament except for a few lines
and they test this area heavyly I learnt in the exam.
I have done a lot of searches even in CCO but could
not locate any whit
Thanks!!
- Original Message -
From: "Brian Whalen"
To: "Mr. Magoo"
Cc:
Sent: Wednesday, August 29, 2001 7:30 PM
Subject: Re: How do I filter ICMP? [7:17761]
think u wanna replace tcp with icmp to block pings..
Brian "Sonic" Whalen
Success = Preparation
Hi List!
I would like to know how can I block ICMP echos (Ping & Trace) for an
specific interface, allowing everything else. I tried the ACL below but it
didn't work. What am I doing wrong??
Router-R2#sh run
access-list 101 deny tcp any any eq echo
access-list 101 deny udp any any eq echo
a
Hi group,
Am finally going for my CID examination on Saturday.
Has any one written the exam lately? I heard that
cisco is planning to change the course content. What
is its difficulty level? I already have CCNA, CCDA
and
CCNP. I understand alot of people do fail this exam,
what are the t
Hello Charles,
Please try as an example
logging 192.168.x.x
logging trap debugging
logging facility local6
( you can use other facilities here but match what you do on the SUN box.)
On the SUN box try (in the syslog.conf file)
local6.debug/var/adm/messages (or any file you like
Almost sure that one cannot assign an address on the 127 network to a cisco
router. This address is reserved for special reasons. One of the reasons
that come to mind is to test the TCP/IP stack on a workstation or Server. If
pinging the 127.0.0.1 address is successful, you can be almost sure that
Hi group,
Am finally going for my CID examination on Saturday.
Has any one written the exam lately? I heard that
cisco is planning to change the course content. What
is its diffulty level? I already have CCNA, CCDA and
CCNP. I understand alot of people do fail this exam.
AM using the Cisco Intern
This is an interesting situation. You are not allowed to use the ip ospf
network command to change the network type ? Ok. Are you allowed to change
the ptp on R1 to multipoint ? No ?
The network type is a critical factor on whether full adjacency is achieved.
Frame map statements and ip ospf prio
8/23/2001 11:11pm Thursday
I am going to be teaching a CCNP course at a local university & would like to
have RADIUS software loaded on my NT server for some remote access labs.
Does
anyone have a copy of Funk's steel belted RADIUS I can buy/trade for?
I do not want the 30 day trial version.
You guys sure have a good sense of humour. Anyway,the 2 day lab exam I took
recently was much more difficult than this new upcoming 1 day exam.
Day 1 of old exam
1. Do this and do that. You are not allowed to use this and that.
2.Configure this and configure that. You are not allowed to use thi
8/23/2001 12:02am Thursday
I am trying to hyperterm in to a 2611 router via a USR 14,400 sportster
modem.
The router answers BUT the hyperterm screen is black with a flashing curser
only.
No input can be sent from the keyboard.
output of show line & show run are as follows:
frame_relay_switch
Hello,
I have been successful with the CCIE lab. I would like to resell the
equipment from my home lab.
Available: Cat 2926T, 2509, two(2) 2513's, two(2) 2503's, 4000M.
Please send an email if you are interested and I will provide equipment
details.
Thanks,
Winston
CCIE#7991
Message Poste
I have a US Robotics Sportster 14,000 modem connected to my 2611 router via
the AUX port.
The router does not answer the call. I have an enable & enable secret
password set.
I am certain of the satin crossover cable and all other physical layer
issues.
Here is my config:
line con 0
transport i
7/30/2001 6:30pm Monday
Has anyone ever heard of a 4 port [RJ-45] NIC card that can be used in a
server for load balancing & so the server can be in multiple VLAN's ?
I thought Intel made such a card but do not see one on their site or CDW.com.
I want to buy one for my CCIE home lab if any on
7/22/2001 7:45am Sunday
It is possible to run IPX between WIN 95 workstations without a server on the
segment?
Richard
[EMAIL PROTECTED]
//
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=13246&t=13246
--
FAQ, list archives
how call proceeds. etc etc. during all this
procedure what are the necessary compnents.
thanks
mr. wonder and also confused:))
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=11242&t=11242
--
FAQ, list archi
i am really confused with csu-dsu. can any one explain i detial about this
term.
thanks
wonder
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=11241&t=11241
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/l
Hi, there:
Can anybody gibe some advice on taking CID exam
Thanks in advance
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=9991&t=9991
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Re
1 - 100 of 163 matches
Mail list logo
