Kevin,
Ascend (Now Lucent) use to have the sources for the generic Livingston
Radius server on their web site under the support area. You might also
try a search on RADIUS or Livingston on your favourite search engine.
You will need to compile them using gnu C. When I last played with them
( a
Hi,
I am working towards CIPT 2.0 (Cisco Call Manager v3.0) exam.
I have a CAT 6K in the core with 6608 (8 port E1 blade) as per the CIPT
LABs.
The problem is that the 6608 resets itself after about 40 S, making it
very difficult to complete a call over the E1 link.
It seems to help if I disab
I sat the CID Beta yesterday, or rather that is what I booked for, that
is what it said at the end
but the heading throughout the paper itself was 'Cisco Secure VPN' and
the questions were
certainly more akin to VPN security than Design.
Has anyone else had a similar experience / problem?
Peter
is no valid load for it.
Hope that helps anyone else setting up the CAT for CIPT.
peter whittle wrote:
> Hi,
>
> I am working towards CIPT 2.0 (Cisco Call Manager v3.0) exam.
>
> I have a CAT 6K in the core with 6608 (8 port E1 blade) as per the CIPT
> LABs.
>
> The pr
Anyone in the Midlands area in the UK seriously interested in going for
CCIE ISP DIAL
before it disappears?
I am based near Birmingham and work for a Telco.
Peter
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report mis
Help!
I have just tried to get at the archives under the re-designed
GroupStudy.
All I get is a blank screen with a Document Done message.
What happened to the old FAQ and old archives?
(I am using Netscape Communicator 4.7 on WIN95 PC)
Many Thanks
Peter
**NOTE: New CCNA/CCDA List has been
Hi,
Is anyone upto date on CIPT?
Is the CIPT exam 9E0-569 an updated version to reflect CIPT 2.0 course
changes and Cisco Call Manager v3.0xxx?
I gather that there was a new Beta 9E1-569 on trial in August, has this
now been released?
Does anyone know where the syllabus / exam objectives are?
IP Telephony specialisation - Cisco Call Manager v3
==
Has any member of the group located a Cisco Training Partner outside USA
(In Europe) that is in a position to deliver CIPT 2 course ie based on
Call Manager v3?
None of the UK training partners appear to
t http://www.hotmail.com.
>FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.
>html
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
Hope that helps
Peter
--
Peter Whittle
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&am
config it *again* for config-reg 0x2102 and see if sh ver gives
>you yet another value 'at next reload' - maybe the config-reg statement on
>*your* router is really a random-number generator...
>
>:-)
>
>-e-
>
>>
>> Thanks,
>> John
>html
>Report misc
'N' or 'J'
version. They are 32 pin PLCC others are different form factors.
In article , Peter Whittle
writes
>Check if your NVRAM is ok.
>
>I have a similar problem on a 2620. But in my case it is more obvious as
>whenever you attempt to 'wr' to co
r PC platform?
I am after a source of an inexpensive set for my home lab.
Many thanks for the help
Peter
--
Peter Whittle
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=9647&t=9647
--
FAQ, list archives, and subsc
f what
>> equipment would be best suited for adding VOIP to my home lab. I am
>> considering getting the 2600 series but wanted some advise on if there was
>> anything smaller or better suited for the job. Thanks for the help.
>>
>> Woody
>html
>Report misco
Has anyone attended the new DQOS course?
This is the QoS course recommended for the new IP Telephony Specialist.
The other courses are CVOICE & CIPT.
What is it like, is it basically the IP QoS book plus QoS for VoIP?
Is it running in the UK yet?
Thanks
Peter
--
Peter Whittle
Mes
daries. There's a lot of bit-flag level encoding.
>
>ISIS, however, was designed for extensibility. Its optional fields
>are in variable-length Type-Length-Value constructs, so it's much
>easier to add features than it is to OSPF.
&g
elco charges). Might want to do this towards the end to keep costs down and
>cancel the service when finished. Anybody know a different way would be
>great to hear it.
>html
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
--
Peter Whittle
Message Posted
l show me Why is ? When I set clock on rouer 2500 ,2600,3660 serial , but
>If I reload router . My router not save clock
>then return *01:41:38.137 UTC Thu Mar 4 1993
>
>Thank
>html
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
--
Peter
920 ?
>>
>> Also, could you use a T/R module in the Catalyst 5000 to do the same thing
>> ?
>>
>>
>>
>>
>>
>>
>> Dreaming of a Swiss Account? Get it here: http://freemail.swissinfo.org
>html
>Rep
'The Pony
Express' of data communications. 'We get the data through, eventually,
no matter how crummy the analogue link is!'
Not being of IBM extraction I am not in a position to comment on SDLC or
Bisync.
I hope that this helps
Peter
--
Peter Whittle
Mess
if you don't have SMARTNET on the routers.
Peter
In article , [EMAIL PROTECTED]
writes
>Just to confirm. Can a MC-3810 do VoIP or only VoFR?
>
>Thanks,
>
>Hugo
>html
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
--
Peter Whittl
>
>As fas I understood reading the notes at:
>
>this box will recognize a 64MB DRAM.
>
>Am I correct?
>
>TIA
>
>
>-Original Message-
>From: Peter Whittle [mailto:[EMAIL PROTECTED]]
>Sent: sexta-feira, 30 de novembro de 2001 21:40
>To: [EMAIL PROTECTE
as I understood reading the notes at:
>
>this box will recognize a 64MB DRAM.
>
>Am I correct?
>
>TIA
>
>
>-Original Message-
>From: Peter Whittle [mailto:[EMAIL PROTECTED]]
>Sent: sexta-feira, 30 de novembro de 2001 21:40
>To: [EMAIL PROTECTED]
>Subjec
;html
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
--
Peter Whittle
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=28104&t=27955
--
FAQ, list archives, and subscription info: http://
0-is-mz.12.2-4.T1 supports VoIP.
>
>
>
>May be the "v5" variant is not needed.
>
>Thanks,
>
>Hugo
>
>-Original Message-
>From: Peter Whittle [mailto:[EMAIL PROTECTED]]
>Sent: sabado, 1 de dezembro de 2001 07:45
>To: [EMAIL PROTECTED]
>Subje
ly, some mistakes are unavoidable, but this one
>seems avoidable (if it is a mistake)
>
>Priscilla
>
>
>
>Priscilla Oppenheimer
>http://www.priscilla.com
>html
>Report misconduct and Nondisclosure violations to [EMAIL PROTECT
In One Lab Lab Study Guide
>ISBN 0-07-212760-0
>By Stephen Hutnik & Micheal Satterlee
>html
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
--
Peter Whittle
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=29082&t=28991
rgest e-mail service with MSN Hotmail.
>http://www.hotmail.com
>html
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
--
Peter Whittle
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=29801&t=29337
--
tha a CISCO mc3810 works as a gateway in VoIP, i mean that my CISCO must be
a
>bridge between PSTN and the IP Cloud.
>
>Regards
>html
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
--
Peter Whittle
Message Posted at:
http://www.g
Hi all,
I am interested in configuring the AUX port with external modem to
handle ppp dial in on either a 2500 or a 4000.
Does any one know of a reference where I can find out more about using
the aux port as
another port rather than as a terminal port? The location of a specimen
configuration w
Hi,
Does anyone know if Cisco E1 ATM IMA will interwork with Newbridge 36170
IMA?
Thanks Peter
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and N
Kamoto
There are normally 2 basic methods of interworking ATM with Frame Relay
which are normally handled by a FRATM.
They are: Network Interworking Function (NIWF)
Service Interworking Function (SIWF)
NIWFs work in pairs, have both a Frame i/f and an ATM cell based i/f.
Basica
I am working on Cvoice exam and I am having some difficulty with getting
vofr to work.
I have 2 x 2621 running IOS 12.07 T with NM2V and VIC-2FXS, & Wic1T
linked together either via serial port or via ethernet.
Routers R1W1 and R2W2.
I can make local calls from one FXS port to another port ok.
Hi,
What is the difference between an RJ45 connector as used on 10Bt and an
RJ48
connector as used on 120R Primary rate?
They both appear to be the same 8 pin idc connector.
Thanks
Peter
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.htm
The following are my own personal opinions and observations and are not
meant to represent the official views of the company that I work for.
I have recently passed CVOICE 1.0
A few personal comments:
The exam I sat was based very heavily upon CVOICE course notes.
So a set of CVOICE cou
Dorothy
Further info
pulver.com, Inc. produce a regular VoN newsletter.
With latest news, articles and things related to VoN.
It is not directly CVOICE study material but does provide additional
background / insight.
THE PULVER REPORT(TM)
Provided by: pulver.com, Inc.
Y
+ NM-1V + VIC, even less than an NP-1A. (you
also get 2 x UIO serial, 10Bt)
Many Thanks,
Peter
--
Peter Whittle
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=23594&t=23594
--
FAQ, list archives, and subscription in
36 matches
Mail list logo