On Tue, 19 Aug 2003, Johan Bornman wrote:
Which website(s) is the best to get the know how with Linux - beginner
level
Try Justlinux.
Rick
This e-mail may contain confidential information and may be legally
privileged and is intended only for the person to whom it is addressed
Ethereal works fine under XP.
Rick
On Wed, 26 Feb 2003, PacketEXPERTS wrote:
Thank for getting back to me, okay this is what I am
seeing:
NetXray and Sniffer Pro work fine in 98, but when I
try to load them onto a coupter running XP, it stops
the install dead in its tracks and tell me
remember the debug and errors did not make it look like a ppp
authentication error.
Rick.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of
Cisco Nuts
Sent: Tuesday, February 18, 2003 8:13 AM
To: [EMAIL PROTECTED]
Subject: Isdn error with PPP - Why always?? [7
The bits are set by the equipment in the FR cloud.
| |
R1--|--Ra-RbRc-|-R2
| |
FR boundry FR boundry
In a simplified drawing like this if the link from router Rb to Rc was
Which linux are you using and have you tried the ping -f
command. Under RH 7.3 the -f option doesnt show as available
under help for ping but the option is still available. The -f
option is still documented in the info files.
--
--Rick
Man invented language to satisfy his deep need
you can always pay more or less
depending on how lucky you are on the day you buy.
--
--Rick
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=51127t=50950
--
FAQ, list archives, and subscription info: http://www.groupstudy.com
in the lab.
--
--Rick
Support bacteria -- it's the only culture some people have!
David j wrote:
:I have that equipment, but you can't simulate speeds of 2Mbps with that
:cable (at least I couldn't, only up to 512 Kbps, I think this is a
:limitation of RS-232), I think that with V35 Female
:I stumbled upon an old 2501 at work. I recovered password. Whats the best
:way to clear the config and start fresh?
wr erase
reload
--
--Rick
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=50030t=50012
--
FAQ, list archives
:From: Richard Tufaro
:Subject: Re: OT...TraceRoute DNS Naming Question [7:50005]
:
:understandable...is there anywhere out there a listing of prefix's for
:different ISP's?
You can dig the information out here www.flumps.org/ip/.
--
--Rick
The problem with this country
the lab steps are listed below for
those interested.
Thanks
Rick
Access list before performing the authentication ---
labA#sh access-lists
Extended IP access list 100
Dynamic tempaccess permit tcp host 150.1.1.1
If memory serves me correctly it stands for
Serial Console 0
John Brandis wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
**
visit http://www.solution6.com
visit http://www.eccountancy.com - everything for
I am wondering how you know you passed all 4 if only
have results to 2 of them?
Eduard Moisak wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hi All!
I've got a question concerning Cisco CCNP beta-exams.
I was passing 4 betas at VUE testing center at Feb, 18 (Rouring,
You mind sharing your public key so I can encrypt the
super secret search engine. :)
Roberts, Larry wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Normally you would have a TACACS/RADIUS server ( Cisco's ACS comes to
mind )
and a TACACS/RADUS client ( Router/WAP also come to
2-5
1-4
will also work :)
Kevin Love wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
1-5
2-4
Worked - thanks guys!
Kevin
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=47527t=47332
--
FAQ, list archives,
Where did you find info that Cisco does not support
25xx series anymore? I have 156 support contracts
on 2509, 2511, and 2520's. I also just finished a
network wide upgrade of IOS on these same boxes.
I am concerned that Cisco just announced this and
this leaves me with a serious problem.
S M
Cisco is not a Telco, so the wire service is not a valid source for info.
I could name at least 12 ILEC's that are making profits and have been for
many years and this is only just a stagnant time for them. They will be
moving
forward in another year with huge network expansions. The profitable
I am having some trouble understanding NLRI as opposed to
straight network routing updates.
Anyone got a pointer to information that might clear up NLRI
some?
Thanks
--
--Rick
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=47337t=47337
I usally just change my mac-address and it will get a new ip and then you
can change it back
after that.
Rick
McHugh Randy wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Does anyone know how to release a DHCP lease on a 2514 eth interface? I
would like to release t
Dear Brother:
About the IOS switch, I ever use these command to suppress boradcast storm,
just for you reference.
Enter command into interface
port storm-control broadcast action filter
port storm-control broadcast trap
port storm-control broadcast threshold rising 100 falling 25
wish it can
It looks to be the same as 506 to me:
http://www.cisco.com/warp/public/10/wwtraining/certprog/testing/current_exam
s/640-606.html
Penn Daniel wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hi,
I was just about ready to take 640-506 (Support) when they changed the
test. Has
releases to work. The funny thing is this came with 6.12 on it.
Rick
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=46519t=46519
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct
: address is 0009.7c48.c23a, irq 10
Licensed Features:
Failover: Disabled
VPN-DES:Enabled
VPN-3DES: Disabled
Maximum Interfaces: 2
Cut-through Proxy: Enabled
Guards: Enabled
Websense: Enabled
Thanks,
Rick
Brad Ellis wrote in message
[EMAIL PROTECTED
developed in house?
If its something you developed would you be allowed to share it?
I am looking to upgrade our in house record keeping and am
searching for ideas on what to include and how to lay it out.
Thanks
--
--Rick
Meader's Law:
Whatever happens to you, it will previously
a 501 and
possibly even a 506 cheaper than build it out of a PC?
Rick
Ocsic wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
please mail me : [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=4609
about 2 - 3 weeks, but I hope your CCNA didn't expire? You said three years
and that is the time frame to get recertified in or obtain the CCNP.
Steve Ringley wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
How long does it normally take for Cisco to send the paper cert out after
If you notice the requirements you must meet as listed in the
tracking system it shows 4xx, 5xx, and 6xx.
Tshepo Kowane wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
What about some us with 2 down and 2 go and not yet registered for the
remaining exams . Do we have to start
Make sure your PC's are capable of transferring data faster
than this. There is not many hard drives that can do 100mb/s.
My laptop I am on now tops out at about 8.5mb but my PC
goes up to about 17mb.
Sim, CT (Chee Tong) wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hi.. I
Although, I don't entirely disagree with you I have not had
any luck finding any documents on EIGRP that stated it was not
a Hybrid Protocol or did not list enough Link-State qualities to
include it as a partial Link-State Protocol. That is outside of one
document by you.
Rick
- Original
and YES I said you are wrong! EIGRP is as much Link-State as it is Distance
Vector.
Rick
Priscilla Oppenheimer wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
At 04:13 PM 5/13/02, Mike Mandulak wrote:
Lammle refers to EIGRP as being a Hybrid of distance-vector and li
After finishing my latest upgrades I have 3 sets of 2500 Boot-Rom's left
over. They are the latest 11.0(10c)XB2
I have saw a couple post on here asking for some. If your interested drop me
a line off the list.
Thanks
Rick
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=43234t
GOL is the last resort tried by the router to send packets bound for unknown
destinations.
default network command, specifies the network (e.g. the ISP's network) to
which the un-known destination packets will be forwarded to.
This is particularly useful when you move frequently, but have a well
Hi all,
We have 6509 with Dual Sup1A and dual MSFC/PFC.
Sup1A is running CatOS ver 5.5(6a) and MSFC is running IOS ver 12.0(3)XE2.
These dual engines have been configured for high availability and config
redundancy.
Multiple vlan interfaces have been configured on the MSFC.
HSRP configuration
On Mon, 1 Apr 2002, Brian Zeitz wrote:
:Ill give you a free website that you can find tons of Free white papers,
:Recourses and everything you need for your exams if you can tell me who
:AKA William S. Bonnie is.
Billy The Kid
--
--Rick
Meader's Law:
Whatever happens to you
show controllers serial x
:which is the command that will show the type of cable attached to the
:interface?
:so i can know if its dce or dte
--
--Rick
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=39003t=38977
--
FAQ, list
Hi All,
Does anyone has bought the CCIE lab workbook for 1 day test? Is it worth
$315? Does it help you on planning and strategy?
Thanks in advance,
Rick Mai
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=38878t=38878
--
FAQ
.
Rick
On Sat, 16 Mar 2002, Vik D wrote:
:Hi can anyone provide a brief but simple explanation of the cabling
:standards involved. The reason I am asking is that I have 2 cisco routers a
:2524 and a 2501 with DB-60 interfaces. At this time I need to connect them
:together to simulate a point
Hi all,
Have faced some weird problems when working with 4 port BRI module in 3662
router. The 3662 router has 12.1(5)T10 IP Plus IOS.
Some of the problems faced are as under :
The dialer idle-timeout on dialer interfaces does not work. The
connections (ppp multilink bundle) are disconnected
Zahid,
there used to be a site in Australia that had instructions for
using a PC power supply as a replacement.
Perhaps you can find it with a little searching.
Good Luck
Rick
On Sun, 10 Mar 2002, Zahid Hassan wrote:
:Date: Sun, 10 Mar 2002 15:46:59 -0500
:From: Zahid Hassan
:To: [EMAIL
Does anyone have experience in cfg on LS1010? I have hard time getting my
PVC under an interface. I'm running ver 11.3
Thanks in advance,
Rick
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=36909t=36909
--
FAQ, list archives
I think u are looking for the NM-4T module that will fit into your WIC-1T.
However this module is only supported on 36xx series routers.
If the 26xx routers have two slots, you could use 2 numbers of WIC2T to get
a max of 8Mbps, with a dual Ethernet ports in 2651.
HTH...
Message Posted at:
dynamic do the trick.
Are there are any restrictions, like trunk ports cannot be set as dynamic
ports, or vlan trunks should be running 802.10 and not ISL??
Any help will be greatly appreciated
Thanks ... Rick
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=31870t=31870
What's the best way to prepare for the CCIE handson lab? Go buy a book and
do lab excercise?? Any suggestion?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=27407t=27407
--
FAQ, list archives, and subscription info:
What kind of help can you provide?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=26869t=26854
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations
that the config for vty 0 is not the same as the other vty's by
using the sh line vty 0 command.
Any help will be grately appreciated.
Thanks and Regards ... Rick
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=26102t=26102
--
FAQ, list archives
You are all just a little off here. It has a RJ48 connection not
RJ45
MADMAN wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
No, the module is just what it says, a CSU/DSU which terminate your T1
via an RJ45. looks like a 10BaseT connector but the similiarities end
my company is ordering Cisco as3500's, does anyone have any Idea how I would
go about testing this equipment
_
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp
Message Posted at:
my company is ordering Cisco as3500's, does anyone have any Idea how I would
go about testing this equipment
_
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp
Message Posted at:
well I got a new laptop in at work today and they order it
without a 9 pin serial port. I did however find a USB to serial
cable but it does not seem to be working very good. Anyone else tackled
this problem? what choices do I have except keeping the old laptop.
Message Posted at:
I was able to dig up 2 switches with ATM modules in them and wanted to
practice setting up an ATM network between them; however, I can't find any
documentation on directly connecting the two switches. I can only fine docu
on connecting two switches together with a lightstream between them. Is it
[demime could not interpret encoding binary - treating as plain text]
San Jose and Halifax have made some dates available recently as a result of
the 2 day to 1 day conversion. Does anyone have any idea when/if RTP might
follow suit?
[demime could not interpret encoding binary - treating as plain text]
OR ---
Stan, Kyle, Eric (for the heavy/big boned equipment), Chef (all NICs run
in promiscuous mode), and Kenny (always a suspect if an interface appears
dead). Of course, the firewall is named Officer_Barbrady.
for your help. Or is there a alternative secure method of accessing
the http://server/certsrv/mscep/mscep.dll website.
Thanks and regards Rick
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=20235t=20235
--
FAQ, list archives
[demime could not interpret encoding binary - treating as plain text]
Is there anything that I will be unable to do [that is relevant to preparing
for the CCIE lab] with an ISDN simulator (versus having actual ISDN service
with my local phone company).
Thanks
I'm using a 7960 but there's no power adaptor hook up to it. I guess the
LAN connection provides the power.
Rick
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=19848t=19841
--
FAQ, list archives, and subscription info: http
Thanks for all who responded. Combining everyones posts I was able to put
together a config that now works.
For the record:
You can indeed use a single ISDN line to connect two routers together to
practice your ISDN configs. This config was tested using two C2503 routers,
a single motorola NT1
Check out www.bfq.com. October is open right now. 6 hours for only 49.95.
They have dual RSM's and a token ring switch as well. Set up like Mentor
Technologies ECP1 class.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=19593t=19593
If you are doing OSPF and using physical int., then you need map statements
with broadcast at the end. If sub int's you don't need map statements but
you must have network statements of course and a neighbor statement. You
don't need any OSPF config on your frame switch. e-mail me if you want
OUCH, that is a nasty sentiment. You need to get a better attitude. Cisco
is not a religion, sounds like you need to find some.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=19600t=19534
--
FAQ, list archives, and subscription
NOPE
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=19599t=19538
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
There are things that are a lot more important than cisco. Too bad it takes
times like these for most of us to realize it. The fact that anyone would
post anything negative with the state our country is in makes me wonder if
they should even be allowed to live here! This is America so people
I have received several responses sofar expressing a great interest in the
solution. Back to back ISDN over a single ISDN line seems to be a very
acceptable approach to simulating DDR. Unfortunately, nobody seems to be
able to confirm that it can be done. A seach of archives reveals discussions
indicates that it can be done. Try it.
-Original Message-
From: Rick Harville [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, September 11, 2001 10:15 AM
To: [EMAIL PROTECTED]
Subject: Back to back ISDN [7:19414]
I have received several responses sofar
This is a fine group and I lurk here often, please help if you can...
Does anyone know if its possible to setup two C2503's back to back over a
single ISDN line, assigning one spid to one router and the other spid to the
second router?
I have 2 Cisco 2503's with st Bri. Im using Motorola NT1
Congrad to you!!!Phantom wrote:
Well after 4 months of hard work and late nights I am finally a
CCNP.
I just passed the CIT exam with a score of 965. The exam was
not very
difficult. If you studied hard for the other exams this one
will be a
breeze. Only new stuff that wasn't in the
Hi all,
We are using Cisco VPN 3015 concentrator with 3.0.3.3des software and a
3.0.3B Cisco VPN client.
We have a NAT device (1600 router with NAT) between the VPN client and the
VPN concentrator.
If I use preshared keys and with IPSec-over-NAT enabled, I am able to
connect to the VPN
What version of VPN Concentrator S/W and VPN client software are u using.
Are u connecting from behind a NAT device, or is your VPN situated behind
the firewall.
I am facing a similar problem when connecting using certificates.
With similar errors : on client : Remote peer not responding.
On VPN
Can you pass CCNP w/o having Cisco gears? I'm doing practice test from
Boson and doing the Sybex study guide? Is that sufficient? Do I need to be
in front of a router?
Thanks in advance,
Rick D
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=18107t=18107
I've been working with the Boson study questions. In the actual exam, do
they ask you for the exact command to display or configure something or is
it multiple choice?
Thanks in advance,
Rick D.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=17711t=17711
Does the test has any fill-ins like the Boson practice question?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=17714t=17522
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct
How is this different from configuring two different default routes for the
same network
e.g.
ip route 10.0.0.0 255.0.0.0 202.33.22.11
ip route 10.0.0.0 255.0.0.0 203.44.33.22
ip route 10.0.0.0 255.0.0.0 204.55.44.33
Regards ...
Message Posted at:
We have 8540 CSR sitting at the core of our network.
Three 5500 switches connect to it via gig uplinks.
We have three different IP subnets and all the three 5500's have users from
all these three subnets.
Due to this we had to configure BVI on the 8540 and make the interfaces
connecting to each
When using Digital certificates for authentication I am facing problems if
the vpn3000 internal user database is used for extended authentication.
If an internal user is created and if that user does not belong to the
VPNC_base_group then the extended authentication fails.
i.e. if a new group is
I am looking to pass the CIPT exam and would like to get a copy of Call
Manager. Does anyone know where I can get a copy or maybe a shareware voice
or an eval? Thanks.
/Rick
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=15402t=15402
simply the ability to break the T1 down to ds0 level. So you
get 24 DS0's in a T1 same thing with DS3's, 28 T1's in a DS3.
Rick
Santosh Koshy wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Channelized or Non-Channelized: This means that the payload data can
either
, but no change. Can someone please tell me how I can verify the cards
are working correctly.
/Rick
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=14102t=14102
--
FAQ, list archives, and subscription info: http://www.groupstudy.com
To anyone that has some protocol analysis experience can you please contact
me offline to discuss some issues that I have. Thanks for your time...and
sorry for the waste of bandwidth.
Rick Watson
Network Engineer
Advanced Systems Development, Inc.
OUSD(Comptroller)
703.697.5710 office
[EMAIL
I am looking to pass the Cisco IP Telephony and the CVOICE exams. I
would like to get a hold of some cheap IP Phone for IP Telephony. Does
anyone know where I can get them. I am not interested in quality, just
something to test and study with. Thanks.
/Rick
Message Posted at:
http
Rick Watson
Network Engineer
Advanced Systems Development, Inc.
OUSD(Comptroller)
703.697.5710 office
[EMAIL PROTECTED]
-Original Message-
From: Dennis Laganiere [mailto:[EMAIL PROTECTED]]
Sent: Friday, June 15, 2001 12:40 PM
To: [EMAIL PROTECTED]
Subject: RE: CCIE lab prep
ooopsunable to post the link...hmm...why..?
-Original Message-
From: Watson, Rick, CTR, OUSDC [mailto:[EMAIL PROTECTED]]
Sent: Friday, June 15, 2001 1:29 PM
To: [EMAIL PROTECTED]
Subject: RE: CCIE lab prep. Is there a syllabus? [7:8385]
Rick Watson
Network Engineer
Advanced
this problem
with 3 PIX 506's. Cisco has been good about returning them. I just wanted to
know if anyone else has experienced these problems.
/Rick
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=8799t=8799
--
FAQ, list archives
form this command? Thanks for the insight.
Rick Watson
Network Engineer
Advanced Systems Development, Inc.
OUSD(Comptroller)
703.697.5710 office
[EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=8528t=8528
--
FAQ
I have used one called radtac. It works good for me, but I only use it
for very simple configs and don't really hit it vary hard, so I can't say
much more about it. You can get a full trial version off their web sight
that is good for 30 day. (www.radtac.com)
/Rick
- Original Message
I have seen many items on Cisco's web page listed a spare with an = sign in
the part number.
Can some tell me what this means?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=8443t=8443
--
FAQ, list archives, and subscription
Any router but a 2500 will give you the serial number via the following
commmands:
c2600 : 'sh c2600', 'sh diag'
c3600 : 'sh c3600', 'sh diag'
c7200 : 'sh c7200', 'sh diag'
rsp7500: 'sh diag 31'
In addition, 'sh diag' will give you the serial numbers of all the modules
installed in a modular
a
secondary ip address on the ethernet interface for the old subnet that was
bridged. That way, both your new and old subnets (at least on one side) will
work together. After you cleanup the second side's ip addressing, remove the
secondary.
Hope this helps.
/Rick
Message Posted at:
http
Can you post a 'sh int s0' and a 'sh int s2' so that the group can see?
Also a 'sh contr s0' and a 'sh contr s2' would be nice.
Have you checked out 'physical-layer async' on those ports?
/Rick
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=7683t=7548
Use 12.1(5)T8 (or higher) and use EasyIP Phase 3 (DHCP client), forget the
PC.
interface dialer0
ip address dhcp
...
etc.
See my other post at
http://www.groupstudy.com/form/read.php?f=7i=7419t=7216
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=7680t=7555
Albert,
My bad, I just realized you weren't configuring a serial interface, you were
doing a dial-up (async? isdn?), anyway here is my correction:
(this works with IOS 11.3 or higher) Hope this helps...
interface dialer1
ip address negotiated
For example:
!
ip
script.
Kevin Jones' config looks fine (it works, doesn't it?!). Have you looked at
the following URL?:
http://www.cisco.com/warp/customer/793/access_dial/async_ppp.html
/Rick
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=7681t=7652
to configure QoS throughout your network, than use
shaping. If you are working on only a single router or interface (or need to
regulate traffic you don't control inbound on an interface) then policing
may be your only choice.
Just a thought.
/Rick
Message Posted at:
http://www.groupstudy.com/form/read.php
I think I am doing the same thing in my home lab, this info may help you.
EasyIP Phase 3 (DHCP Client) is definately not available until 12.1(5)T
(which is deferred to 12.1(5)T8). Make sure you don't use the deferred
release 12.1(5)T.
I would highly recommend NOT using telnet to remotely
OK, more than you ever wanted to know...
The setup of the PCs is really no different than if they are on the same
hub, switch vlan, or directly connected via a twist cable. The configuration
of the PCs has to be done in one of two ways:
1. Set the PCs to the same ip subnet and mask (the default
is with the PROTOCOL command. Every router that I have looked
has only L2F and L2TP as valid options not PPTP. Is this an error or am I
doing something wrong. I have seem this on a bunch of different IOS and on
different platforms. Thanks.
/Rick
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i
I need some local (DC/VA/MD) vendors of refurbished Cisco equipment. My
current company is allowing me to build a dream lab to also help in
conducting some monthly mentor meetings. Thanks for the info
Rick Watson
Network Engineer
Advanced Systems Development, Inc.
OUSD(Comptroller
I am a little confused why Diffie-Hellmen's key exchange is needed for IKE.
When I setup ISAKMP, regardless of the authentication I am using I need to
supple a key weather pre-share, public/private, or RSA sig. If this is the
case why can't the two VPN peer just use this key for setting up the
I was told today that the PIX 506 can only support 4 VPN tunnels. It this
true and does it include remote access users. I just sold a customer a 506
and he wants to connect 10 salesman to it that have laptop computers.
Thanks.
Message Posted at:
a ping is performed it returns the infamous
.
This has really got me perplexed, and any help would be greatly appreciated.
Maybe I am just not understanding something about the trace command/ICMP.
Rick Watson
Network Engineer
Advanced Systems Development, Inc.
OUSD(Comptroller)
703.697.5710
mode..but before I go, I
must give respect to the many professionals on this list. I have learned so
much from all of you. And truly look forward to the day that our paths
cross.
Rick Watson
-Original Message-
From: Adam Burgess [mailto:[EMAIL PROTECTED]]
Sent: Thursday, May 10, 2001 3:27 AM
all 100 percent operational ...
:
:what would be a good price for each or for the complete set
I think maximim would be $650 each. You can meet or beat that price
on usenet.
--
--Rick
Mechanical engineers design weapons. Civil engineers design targets.
Message Posted at:
http
this will work. The other way is to use the frame-relay command on the
sub-interface. Which way is best or is there a better way then both of
these. Thanks.
/Rick
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=2839t=2839
--
FAQ
1 - 100 of 190 matches
Mail list logo