Try showing full header on the email. You might be able to dig it out
from the X-originating IP.
Cheers,
Frank Kim, Manager
Sales and Marketing
Loud Packet, Inc.
26755 Jefferson Ave. Suite F
Murrieta, CA 92562
Direct: 909-757-5119
Office: 909-894-8240 ext. 8010
Fax:909-494-4425
Email
I'm wondering if anybody knows any good CCIE prep classes in NYC that
are reasonably priced. Especially if they have flexible payment plans.
Thanks!
-Dae Il Kim
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=7244
at [EMAIL PROTECTED] if you're interested. Thanks for your time.
Sincerely, Dae Il Kim
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=71940&t=71940
--
FAQ, list archives, and subscription info: http://www.groups
mmand then they will not see the command output in the configuration.
http://www.cisco.com/en/US/customer/tech/tk583/tk642/technologies_tech_note09186a00800949d5.shtml
Kim
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=71924&t=71694
. So be prepared to
have some users with long faces.
Kim
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=71923&t=71715
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report miscon
/dlls/prod_070103b.html
Kim
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=71922&t=71885
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure viola
by TAC in the following link.
http://www.cisco.com/warp/public/471/vpn3k_revert_img.html
Either way good luck. You should not have any difficulties. Upgrading is a
very straight forward procedure. In the end I did not need either of the
above. The upgrade went smoothly.
Kim
Message Posted at
ink, smile and accept the offer. Good luck!!
Kim Graham
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=69861&t=69746
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduc
ecified, will recieve the
notification. They cannot connect to the Concentrator until they click on
the "ok/close" button of the notification screen. Anyone that does have the
required version does not see the notification.
I hope this helps.
Kim Graham
CCNP, CCDA, CCSP
Message Posted
Hi group,
In Bootstrap protocol, does the PIM router selects the RP with the higest or
lowest IP address (assuming everything else is the same) from the RP-set
list obtained in the RP-discovery message?? I was reading Jeff Doyle's
"Routing TCP/IP Vol 2" and pages 491 (first bullet point) and 564 (
configuration guide. Make sure you have hands on experience and think about
practical application of using a pix.
Kim
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=64244&t=64214
--
FAQ, list archives, and subscription in
should
make sure it is to the same patch level or you could have difficulties.
Hope that helps.
Kim / Zukee
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=64066&t=63988
--
FAQ, list archives, and subscription in
Thank you very much everybody.
I think I have received some valuable info/background to get myself
started.
Sean
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=63608&t=63461
--
FAQ, list archives, and subscription info: http://
d be sending pings with the
> Don't Fragment bit set, in which case it would fail, if there
> really is an MTU issue.
>
> See additional comment below.
>
> Sean Kim wrote:
> >
> > Hello,
> >
> > My company has this 3rd party connection through ATM.
me up with what the differences are
between them, and which one is better suited for our network.
Can anyone voice their opinion about these two IDS?
Thanks,
Sean Kim
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=63461&t=63461
-
s. When doing a ping from the
> router, if using ATM interface as source then it is
> going across ATM as 1600 bytes.
>
> --- Sean Kim wrote:
> > Hello Erick,
> >
> > If that's the case, than wouldn't I have problem
> > pinging any nodes (with
> &g
Greetings,
Can I configure the PIX to do both site-to-site and
Remote access VPN at the same time?
I think it is impossible since I can only apply only
one crypto map to the outside interface.
Can someone confirm?
Kim.
__
Do you Yahoo!?
Yahoo
Sean
Erick B. wrote:
>
> The ATM connection (provider) is probably limiting
> payload size to 1500. They may doing some form of
> traffic policing - common these days. Ethernet LAN MTU
> is 1500 so there really isn't a need to send greater
> than that across ATM in this case
ssing something, please let me know.
Thank.
Sean KimM.C. van den Bovenkamp wrote:
>
> Sean Kim wrote:
>
> > There isn't any problem with connection of performance. But
> I am very
> > curious about why this is happening.
> > Does anybody have any idea why this wou
anybody have any idea why this would happen? Or can anybody give me a
clue as to how to approach this problem?
Thank you in advance.
Sean Kim
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=63085&t=63085
--
FA
ly easy to set up and use.
Kim
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=62950&t=62939
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Greetings,
Can I configure a Cisco PIX firewall to do both
site-to-site and remote access vpn preshares key in
one box?
The reason I asked because after configuring
site-to-site vpn, my remote access vpn stops working.
Kim.
__
Do you Yahoo
I am running ios ver 12.1.17 on my 2500 and it
supports TTCP. TTCP also available on MSFC1/MSFC2.
Han.
--- MADMAN wrote:
> It's also supported on the 7500 and 7200 series
> routers.
>
>Dave
>
> Brad wrote:
> > I have not been able to find it on ANY platform
> other than the 12000 and
> > 10
Congrats as well. I hope to be writing this one mid February.
By CSIDS i am understanding you wrote the 9E0-100 correct? and not the
earlier version of this exam.
Kim / Zukee
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=61781&
with it are being revisited. Personally I would disable split tunneling,
but there may be other reasons why it may not come to pass. Only time will
tell.
Kim / Zukee
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=61234&
t while at Nanog I was able to log into my internal network from a
wireless laptop.
All and all it is a pretty solid client.
Kim / Zukee
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=61194&t=61148
--
FAQ, list archives, and
Agreed. No use in letting it go stail. It was hard work to obtain and not
as much hopefully to keep.
Kim / Zukee
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=61145&t=60920
--
FAQ, list archives, and subscription in
ey handled the 1 hour study sessions inbetween baby watch.
Kim / Zukee
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=61036&t=60920
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
/customer/products/hw/vpndevc/ps2030/products_tech_note09186a00800d641d.shtml
Kim / Zukee
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=61009&t=60976
--
FAQ, list archives, and subscription info: http://www.groupstudy.
Maybe I should have asked if anyone is studying for the CCSP? What exams
have you accomplished and what is your next step? I may be amungst the
group of first participants in this set of exams (v3) and others are waiting
to get information concerning the exams before attempting. *grins*
Kim
background check I have passed the VPN v2, PIX v3, and MCNS v3 modules
of the CCSP so far. The last stop will be the SAFE exam.
Kim / Zukee
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=60920&t=60920
--
FAQ, list archi
_example09186a0080093f30.shtml
http://www.cisco.com/en/US/customer/tech/tk648/tk361/tech_configuration_examples_list.html
Kim
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=60544&t=60500
--
FAQ, list archives, and subscriptio
Hi everyone.
I'm taking 640-901 pretty soon, but I can't seem to find what the passing
grade is. Could anyone help?
Thanks.
-Jiin
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=59445&t=59445
--
FAQ, list archives, and subscripti
HSRP
virtual ip address? or I need to use r2, r3 real ip
address or using peer-group?
Thanks.
Kim.
__
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com
Message Posted at:
http://www.groupstudy.com
__
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=58907&t=58907
--
FAQ, list archives,
v 2002 05:06:27 GMT
>Received: from cox.net ([68.104.162.8]) by fed1mtao02.cox.net
> (InterMail vM.5.01.04.05 201-253-122-122-105-20011231) with ESMTP
> id
> for ; Tue, 12 Nov 2002 00:05:56 -0500
>Message-ID:
>Date: Mon, 11 Nov 2002 22:05:56 -0700
>F
aving a problem with. It seems
to say that chooses the more specific flow mask and then in the next
sentence seems to contradict that information. Can some one clear this
up for me?
TIA,
Kim O'Connor, CCNA
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i
in advance.
Kim.
__
Do you Yahoo!?
HotJobs - Search new jobs daily now
http://hotjobs.yahoo.com/
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=56612&t=56612
--
FAQ, list
Hi
Is the CCIE written exam passing score changed?
Recently I found that a few korean people passed new written exam.
And they said passing score is 58%.
They took the exam middle of Oct.
Could you anybody confirm it?
Jigon,Kim
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&a
Is this the QoS/Mcast exam you are speaking of? I am looking at writing it
sometime mid December as preparation for the CCIE and as part of the CCIP
track.
Kim / Zukee
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=55696&
many links that will help you to understand what is
happening. You do not need a CCO account to do this search.
Kim
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=54594&t=54591
--
FAQ, list archives, and subscription inf
O'Reilly has a book called "Cisco IOS Access Lists". It is 250 pages and
covers a few topics. Basics, Security Policies, Routing Policies, Debugging
Lists, Route Maps etc.. I have read bits and pieces of this book and have
found it to be not a bad book.
Kim
Message
You will not loose the configuration if you follow the steps correctly. All
it does is allow you to reset the password to one you can use.
http://www.cisco.com/warp/public/474/pswdrec_2500.html#sample
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=53851&t=53848
--
I just passed the exam on Wednesday and also asked to others.
Therfore
There is no more question about 700.
I'm not 100% sure but I think you don't need to concentrate upon 700 no more.
Jigon.Kim
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=53704&t=53634
SoonKyoung,
ip host is similar to name-to-ip mapping. The name will
be only locally significant.
for example, if you configure
ip host lala 192.168.0.1
You could ping, telnet, and etc to 192.168.0.1 using the name 'lala'
here is real life example but since I did not have 192.168
Hi Jim
I'm preparing the CCIE.
I have been studing the NetGun academy since May at the Global Knowledge.
I don't take written exam yet but I'll do it by end of October.
I have a special permition so if you are interest in it, Please email to me.
Jigon,Kim from Toronto.
Message
Now onto the lab :)
Kim
>
> From: "Persio Pucci"
> Date: 2002/08/02 Fri PM 03:17:07 EDT
> To: [EMAIL PROTECTED]
> Subject: not very good, but good enough... [7:50547]
>
> ... to pass!!! :)
>
> Just came back from my Vue Testing Center where I took the
print,
pull out what I use daily and read up on things that I may have seen but
don't realize they exist.
Thus my path is laid out ;).
Kim
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=50561&t=50561
--
FAQ, list
Hi,
Does anyone know if Cisco's exams are pulled from a pool of questions or if
all the questions on one particular exam will be the exact same set of
questions for someone else writing the same exam?
Thanks in advance.
:-) k
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=50
the xlate and then try to initiate a session to the outside world. (show
conduit, show xlate, clear xlate)
example:
conduit permit icmp any any
conduit permit tcp any any eq www
Kim
>
> From: "Kevin O'Gilvie"
> Date: 2002/07/26 Fri AM 01:20:23 EDT
> To: [EMAIL PROTECTE
x27;s "Top Down Network Designs",
thank you Pricillia. Are there any others?
Any assistance would be greatly appreciated.
Kim Graham
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=49668&t=49668
--
FAQ, list arc
it.
Kim
>
> From: "Johnson, Richard (NY Int)"
> Date: 2002/07/11 Thu PM 10:47:50 EDT
> To: [EMAIL PROTECTED]
> Subject: Cisco Video Conferencing [7:48646]
>
> Hi All,
>
> Is anyone out there currently using it? If so what are your opinions of it?
>
&
when you issue "show spantree" without a VLAN designation?
Kim
>
> From: "Priscilla Oppenheimer"
> Date: 2002/07/11 Thu PM 03:20:41 EDT
> To: [EMAIL PROTECTED]
> Subject: RE: All 0's MAC Root Bridge [7:48578]
>
> Kim Graham wrote:
> >
> &
That will help us out then. There are a few here studying for our
certifications and knowing this will ease our minds a bit.
Kim
>
> From: "Rajesh Kumar"
> Date: 2002/07/11 Thu PM 03:03:34 EDT
> To: [EMAIL PROTECTED]
> Subject: Re: CCIE Lab 4006 SupIII - 3550 [7:4861
be able to ask for a 3550 but if
not we are trying to find something with similar functionalities and service
capabilities.
Kim
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=48610&t=48610
--
FAQ, list archives, and subs
type ieee
Designated Root 00-00-00-00-00-00
Bridge ID MAC ADDR 00-00-00-00-00-00
Without finishing chapter 7 (Spanning Tree) in my LAN switching book I am
puzzled as to whether this is a preset MAC address or self assigned.
Any thoughts? Why or how did this occur?
27;s or the gig
uplinks.
Personally I like them, but others may have varying opinions.
Kim
>
> From: "Michael Williams"
> Date: 2002/07/10 Wed AM 12:41:15 EDT
> To: [EMAIL PROTECTED]
> Subject: Opinions on 4000 -vs- 6500 [7:48467]
>
> We are going to setup some
Thanks Dan for the heads up on the Sybex material. I will not waist my time
on it then.
Kim
>
> From: "Dan Penn"
> Date: 2002/07/03 Wed PM 05:31:30 EDT
> To: "'Kim Graham'" ,
>
> Subject: RE: Starting to prepare for CCDP [7:48042]
>
g the time to write it.
Should I venture out and get the CID Cisco Press book or will I be fine with
those 2 resources, plus practical experience and CCO?
Anyone's thoughts on it are appreciated.
Kim
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i
Congrats Dan. :)
I too found the CIT a bit difficult and I was doing nothing but support at
the time of writting the exam (nocling, backbone support). Thus, logically,
it should have been a bit easier for myself.
Now you can have a break and think about the next step. :)
Kim
>
>
this will probably develop into one of those
tests you dread to take.
Kim Graham
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=47986&t=47986
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list
pare it to those.
I can see this being one of those tests that you will dread to take in the
future. My best advice for anyone thinking about taking the exam is to
follow the outline.
Kim :)
Now onto the next test.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i
: There are 21 flow charts for BGP. It takes each of these flow charts
and explains the steps, output of commands and how it relates to the
trouble. These explainations are short, sweet and to the point.
To each his own but I am enjoying the book.
Just my $.02
Kim
Message Posted at:
http
outerB would re-establish communication after a failed
"hi are you there packet to RouterA". I will have to wait until a lab is
set up to play out the scenario.
Kim
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=47232&t=47177
b?
Where I work is fully supportive of this goal. A lab is in process of being
set up. There is no lack of books in my living room but there is always
room for a few more.
Any pointers would be welcome.
Kim
Message Posted at:
http://www.groupstudy.com/form/rea
everyone,
i think the answer is 1,2 and 3
but, the dump said, the answer is 1,2 and 4
am i wrong?
when should modem auto-configuration mode be used?
1. To be able to configure a modem without sending modem configuration
commands.
2. To configure modem devices that are no currently supported by Ci
Looking for a Lab day swap on June 17 at RTP to early
August. Please email me if you are interested.
Kim.
__
Do You Yahoo!?
Yahoo! Health - your guide to health and wellness
http://health.yahoo.com
Message Posted at:
http://www.groupstudy.com
You have to regenerate your rsa keys after changing your host name or
domain
You also have to remove the saved key out of your ssh client for that
device
-Original Message-
From: Andrew Larkins [mailto:[EMAIL PROTECTED]]
Sent: Friday, May 03, 2002 7:38 AM
To: [EMAIL PROTECTED]
I think it is here but you need login I believe.
http://www.ccprep.com/resources/news/archives/Token_Ring2.pdf
-Original Message-
From: Richard Botham [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, April 30, 2002 9:15 AM
To: [EMAIL PROTECTED]
Subject: Louis Rossi's Token ring white paper [7
What happens if you already passed the written and just want to see how the
test is like?
If you fail, do you lose your credit from the prior exam?
If you pass, does it extend the life of the written exam credit?
Ed
-Original Message-
From: Debbie Westall [mailto:[EMAIL PROTECTED]]
Se
You may want to try exec-timeout 0 0 under line con0
and no exec under line 1 16.
If you console into the 516-CS, it will take 5-10
minutes. It is normal according to Cisco. It take
about 30 sec if you telnet into it instead of using
the console.
Han.
--- "[EMAIL PROTECTED] (Timothy Ouellette)"
and outbound
traffic. The rest of the supernet will use the UUNET
link. But they need to backup each other when one of
them fails.
Thanks in advance.
Kim.
__
Do You Yahoo!?
Yahoo! Tax Center - online filing with TurboTax
http://taxes.yahoo.com
I agree.
-Original Message-
From: Michael Bray [mailto:[EMAIL PROTECTED]]
Sent: Monday, April 08, 2002 1:30 PM
To: [EMAIL PROTECTED]
Subject: RE: netbios over internet [7:40784]
You certainly can do file sharing over the internet - saying 'NetBIOS'
is routable is a bit misleading though
I don't think it can.
As far as I know, it can do IP/IPX/DecNet/AppleTalk/Vines/CLNS.
NetBios over TCP/IP will work with GRE but not straight NetBios or SNA.
If GRE works with NetBios or SNA, it will be cool.
I think that is why we use DLSW with NetBios and SNA connection.
Ed
-Original Messa
ladies and gents,
i'll take a BCMSN beta exam this saturday.
i have two questions.
is it difficult than orginal BCMSN beta exams?
are there no exhibit buttons?
thank u for reading my articles.
god bless u!
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=38210&t=38210
Have anyone successfully installed minicom on Solaris
8? I tried and it failed me when I did: "make ; make
install".
Kim.
__
Do You Yahoo!?
Try FREE Yahoo! Mail - the world's greatest free email!
http://mail.yahoo.com/
Message
d then redistribute
> connected networks for those interfaces you don't want hellos sent on, or
> are there just too many interfaces to make adding only certain ones to the
> backbone efficient?
>
>
> ~-Original Message-
> ~From: Sean Kim [mailto:[EMAIL PROTECTED]]
Thank you for your feed back Peter,
I also tried to add ALL the interface by using below command
ospf add interface all to-area backbone
And then tried to set some of the interfaces passive, individually.
ospf set interface xxx.xxx.xxx.xxx passive
but this failed, so I tried using in
Hello everybody,
I know this doesn`t have much to do with Cisco,
but if anyone would like to share his/her knowledge,
I would be very grateful.
Has anyone worked with Riverstone RS3000 before?
I have set up OSPF backbone area on RS 3000,
ospf create area backbone
Then I wanted all the ports to
Hi,
Does anyone know where I can find sources to buy
VIC-FXS with good price? I can not find them regularly
on Ebay.
Kim.
__
Do You Yahoo!?
Try FREE Yahoo! Mail - the world's greatest free email!
http://mail.yahoo.com/
Message Posted at:
is there any way the password for users in ciscosecure acs in unix
to be visible?
or how about any way to migrate users from unix to nt for ciscosecure acs?
help is appreciated.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=35218&t=35218
how it works out.
Ed
-Original Message-
From: Shawn Xu [mailto:[EMAIL PROTECTED]]
Sent: Thursday, January 10, 2002 2:45 PM
To: [EMAIL PROTECTED]
Subject: RE: Hardware BGP? [7:31529]
Hi, Kim:
Your email gives me a deep impression. 1605 router is one I am attempting to
use for BGP,but when
I got the BGP working on 1600s.
They work fine (in lab environment of course.)
Ed
-Original Message-
From: Ken Diliberto [mailto:[EMAIL PROTECTED]]
Sent: Thursday, January 10, 2002 12:26 PM
To: [EMAIL PROTECTED]
Subject: Re: Hardware BGP? [7:31529]
Dave,
This was good for a chuckle.
Once you solve R1-R4 problem, that should solve R1-R3. On R4, remove the
subi/f 0.1. Just work using the physical interface s0 and turn on
inverse arp like what you have for R3. Also add a map from R4 to R3.
That may help.
Thanks
David
-Original Message-
From: McHugh Randy [mailto:[EMAI
Nick,
I managed to do some experiment with my home lab. When I ignored the
dialer keyword at the server side, the server end will not treat the
routing updates (ie. sending of routing updates) as interesting. As a
result, the idle timeout (default 120sec) will count down till zero.
Hence, the ser
Hi group,
What function does the 'dialer' keyword in the 'snapshot server'
command has?? For eg,
snapshot server 5 dialer
As I understand, this keyword is required for snapshot clients to allow
them to dial to servers as only clients dials to servers (Am I right?).
What function it has
This is just as easy as if you need to decide to run BGP or static route.
1) Is money important to you? if so, take the job that offers you higher
salary.
2) Is learning/experience more is more fun for you? if so, take the job
that you will think will allow you to play with more gears.
3) Is sex
Sh cam (and mac address in AA-BB-CC-DD-EE-FF) format
Or
Sh cam dynamic
Will give you the whole list.
Ed (NP, DP)
-Original Message-
From: Don Oxman [mailto:[EMAIL PROTECTED]]
Sent: Friday, December 07, 2001 12:42 PM
To: [EMAIL PROTECTED]
Subject: OT-How to find port on switch if you
Does anyone want to share with me the IPExpert
workbook in DC Metro area? I would like to buy but it
is too much for my budget right now.
Kim.
__
Do You Yahoo!?
Buy the perfect holiday gifts at Yahoo! Shopping.
http://shopping.yahoo.com
>From your config, I assume you ping from router 2 to 1 since you only
have dialer map at BRI0 of router 2. I think you are missing this in the
interface config of BRI0 at router 2
ppp pap sent-username ... password .
Hope this helps...
-Original Message-
From: sudhakar [mailto:
stem flash
x" to CYA.
dave
"Ng, Kim Seng David (David)" wrote:
>
> Hi group,
>
> I need some advice on upgrading my 1601, Read from Flash(RFF)
> router. It's now running IOS 11.1 on a 4Mb flash card. I have bought a
> new 16Mb flash card and loaded
He is teaching at
http://www.netmasterclass.net/Services/Training/training.html
Han.
--- Gus Hussein wrote:
> Does any one know Caslow's E-mail or where he
> works, he used to teach at
> Mentor.
>
> Does anyone know where he working now
>
> Thanks
>
>
>
>
>
> -
Hi group,
I need some advice on upgrading my 1601, Read from Flash(RFF)
router. It's now running IOS 11.1 on a 4Mb flash card. I have bought a
new 16Mb flash card and loaded IOS 12.1 (size about 10Mb) on my laptop.
Can I swap out the old flash card and insert the new 16Mb and do 'copy
tft
Mark,
Issue the command: clear line . This
will fix the problem.
Han.
--- Mark Rose wrote:
> I am trying to get a terminal server working. It was
> working several months
> ago but when I tried to bring it up today, I get
> the message " %3 is not an
> open connection". I do not have enough e
>
> Kevin Wigle
>
>
> - Original Message -
> From: "Brown, Ricky"
> To:
> Sent: Friday, 16 November, 2001 15:40
> Subject: RE: HSRP on Cisco with 2 Ehternet to ISP [7:26528]
>
>
> > Try using the track interface command on each router
connection )is going down, will router update
at connection breakdown ?
Regards
Kim
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=26528&t=26528
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/ci
Hi,
I was a bit confused after reading the Ciscopress CCNP Support book and
Caslow's ccie book. Can frame-relay multipoint sub-interfaces support
inverse arp DLCI mappings?? Ciscopress Support book seem to say no (not
directly though) but Caslow's book says yes. Thanks in advance...
David
Me
Hi guys,
I appreciate for any input here. I'm trying to sniffer a specific port
that AIM(america online instant messenger) uses, which is 5190/tcp. I'm
currently using network associates sniffer pro version 3.5. Since there
wasn't a tcp/5190 port in the filter, I went into
Tools--->Options--->P
Hi guys,
Usually, on a cat3524-xl or cat2924-xl series switches, I can look at the
stats on how much bandwidth is being used on each port by sh int
fast0/1. Let's say I want to do the same on a cat5500, looking for how
much bandwidth is used on port 2/10. What is the same command? I can't
seem
Hi group,
I am new to this group. Wondering whether someone could help..
I have two routers (2621 and 1601) tied back-to-back using V.35 serial.
Can I simulate a 64K link with this config if I execute "bandwidth
64000" at the interface prompt?? What I understand is that this command
is u
1 - 100 of 333 matches
Mail list logo