ssage-
From: Andrew Larkins [mailto:[EMAIL PROTECTED]
Sent: Thursday, September 11, 2003 12:50 PM
To: [EMAIL PROTECTED]
Subject: RE: question on acl [7:75257]
As multiple single entries - you can not summarize these...
A better way is to have all the specific users that must be denied to be
As multiple single entries - you can not summarize these...
A better way is to have all the specific users that must be denied to be in
a summarizable subnet
-Original Message-
From: Yong Wee [mailto:[EMAIL PROTECTED]
Sent: 11 September 2003 17:30
To: [EMAIL PROTECTED]
Subject: question
Yongwee,
!
! Deny even numbers but permit everything else
!
access-list 101 deny tcp 192.168.2.0 0.0.0.254 host 192.168.1.254 eq telnet
access-list 101 permit any any
! implicit deny all here
!
!
or perhaps more efficiently
!
!
! Permit odd numbers only
!
access-list 101 permit tcp 192.168.2.1 0.
Here is an example of a named ACL to Block Specific even HOST sources to
destination port 23 to the address you specified. You can use:
ip access-list extended BLOCK_TELNET_EVEN
deny tcp 192.168.2.0 0.0.0.254 host 192.168.1.254 eq telnet
permit ip any any
Just practice and play wi
Yes I do and how can I contribute to your good cause?:)
Thank you
Ollie
AT&T Common Backbone
866-397-7309 Opt 1
-Original Message-
From: Accsystest [mailto:[EMAIL PROTECTED]
Sent: Thursday, September 11, 2003 6:33 AM
To: [EMAIL PROTECTED]
Subject: question? [7:75237]
got your email ad
Groupstudy
Sent: 3. september 2003 10:49
To: Security Group Study; 'Jens Petter Eikeland'
Subject: RE: Question regarding dialer-watch
Hi,
You need to do some relavent debugs on the router.
may I suggest you try: debug isdn events, debug isdn error,
debug ppp events etc. you may like to try
Jens,
Assuming this is legacy DDR, do you have a static layer 3 to
layer 2 resolution (dialer map) for the IP of the remote end? Post your
config if you're still having trouble.
HTH,
Brian McGahan, CCIE #8593
[EMAIL PROTECTED]
Internetwork Expert, Inc.
http://www.InternetworkExpert.co
Jens,
Assuming this is legacy DDR, do you have a static layer 3 to
layer 2 resolution (dialer map) for the IP of the remote end? Post your
config if you're still having trouble.
HTH,
Brian McGahan, CCIE #8593
[EMAIL PROTECTED]
Internetwork Expert, Inc.
http://www.InternetworkExpert.co
Jens,
Assuming this is legacy DDR, do you have a static layer 3 to layer 2
resolution (dialer map) for the IP of the remote end? Post your config if
you're still having trouble.
HTH,
Brian McGahan, CCIE #8593
[EMAIL PROTECTED]
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
What are you trying to accomplish? A configuration using specific protocols
for some lab, or are you just trying to get some connectivity up and
running? Why don't you just use backup interface? Ah, it looks like you
are doing this for a lab, and not a real-life reason. O.K., is your IPsec
conn
delete it from your computer.
-Original Message-
From: Howard C. Berkowitz [mailto:[EMAIL PROTECTED]
Sent: Saturday, July 19, 2003 8:33 PM
To: [EMAIL PROTECTED]
Subject: Re: Question in ABR [7:72624]
At 5:17 PM + 7/19/03, Rajesh Kumar wrote:
>Hello all,
>
>If a route
At 5:17 PM + 7/19/03, Rajesh Kumar wrote:
>Hello all,
>
>If a router has its interfaces in Area 1 and Area 2 and no Area 0, is it
>
>still considered to be an ABR OR strictly, one of the interfaces has to
>
>be in Area 0 to be an ABR?
In the present implementation, at least one interface must
At 9:05 PM + 7/19/03, bergenpeak wrote:
>RFC2328 defines this router to be an ABR. However, there are some
>issues with this approach. RFC 3509 defines an alternative behavior
>for ABRs. In summary, when the router connects to multiple areas
>but not to area 0, the router should not operate
This is from RFC2328:
Backbone routers
A router that has an interface to the backbone area. This
includes all routers that interface to more than one area
(i.e., area border routers). However, backbone routers do
not have to be area border
RFC2328 defines this router to be an ABR. However, there are some
issues with this approach. RFC 3509 defines an alternative behavior
for ABRs. In summary, when the router connects to multiple areas
but not to area 0, the router should not operate as an ABR but
instead should operate as if it w
What's the URl for the questions?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=72286&t=72272
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations t
hi,
unlike ospf, eigrp process doesn't know the toppology of the whole
network.
from R1's perspective,there is only one path to reach 192.168.1.0 with
nexthop is R2's s0.
the successor is actually the nexthop instead of route.
hebn
- Original Message
thank you very much
it worked
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=71178&t=71054
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violatio
henry bb wrote:
>
> today I already know why 2500 can ping 88.1.77.1 because
It doesn't make sense that the 2500 can ping all the way to the 3550
Ethernet interface based on the minimal information that you told us before.
You must be doing routing. It has nothing to do with Proxy ARP, though.
Ma
Priscilla Oppenheimer wrote:
>
> henry bb wrote:
> >
> > today I already know why 2500 can ping 88.1.77.1 because
>
> It doesn't make sense that the 2500 can ping all the way to the
> 3550 Ethernet interface based on the minimal information that
> you told us before. You must be doing routing. I
arp cannot pass through serial links and when u want to ask for arp router
behind that serial link then u set proxy-arp on ethernet and that router
reply instead router behind serial,as far as i know
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=71141&t=71113
---
arp cannot pass through serial links and when u want to ask for arp router
behind that serial link then u set proxy-arp on ethernet and that router
reply instead router behind serial,as far as i know
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=71131&t=71113
-
Hi Iwan,
IP ROUTE 0.0.0.0 0.0.0.0 10.0.0.X
where 10.0.0.X is the inside address of your ADSL router (your gateway for
the 10.0.0.0 subnet).
Bikespace
""Iwan Hoogendoorn"" wrote in message
news:[EMAIL PROTECTED]
> Hi Bikespace,
>
> I guess i did not put a default route into the 2511...
>
> Ca
Hi Bikespace,
I guess i did not put a default route into the 2511...
Can you give me an example ...because i think that is know that you are
saying but i am not sure...
Pls give he an example according to my provided IP address and mappings...
My 2511 has the ip address of 10.0.0.99
Thank you
today I already know why 2500 can ping 88.1.77.1 because proxy-arp doesn't
function on serial interface.
so what's the real function of proxy-arp on serial interface ?
Does it work when bridge on the serial interface ?
If bridge on serial interface,how ios transfer arp ? I think there isn't mac
a
This seems to be quite obvious to me. If the packet is generated from the
2500 router , it knows that 88.1.0.0/16 is on serial 0 (directly
connected). The packet reaches 2611 which has 88.1.77.1 directly conected.
The return packet can also flow as 88.1.201.1 is directly conected. But this
is true
Have you put a default route on your 2500 pointing to the inside interface
of your ADSL router?
Otherwise it will not know how to get back to whoever is trying to telnet to
it.
Bikespace
""Iwan Hoogendoorn"" wrote in message
news:[EMAIL PROTECTED]
> My NAT is beiing arranged by my E-tech Modem/
My NAT is beiing arranged by my E-tech Modem/Router/Switch
these are my NAT/Virtual server mapping:
ID Public Port Private Port Port Type Host IP Address
1 23 23TCP 10.0.0.99
2 21 21TCP 10.0.0.3
3 21
Can you paste your nat configuration? If not it should look something like
this:
int eth0
ip address 10.0.0.99 255.255.255.0
ip nat inside
int ser0
ip address 217.19.23.175 255.255.255.0
ip nat outside
ip nat inside source static 10.0.0.99 217.19.23.175
Then when you do a "show ip nat trans
brian dell wrote:
>
> help with the following:
>
> Serial interfaces typically connect to WAN via serial links ?
> correct ?
Yes.
> and once we say serial links we imply bit oriented traffic via
> these links ? correct ??
Nope. Serial means one bit at a time is sent. The opposite is parallel,
leave the other servers as is. not perfect from an
engineering or optimization standpoint, but good enough (which is
often a good enough solution).
thanks again.
- Original Message -
From: Priscilla Oppenheimer
Date: Friday, May 30, 2003 1:49 pm
Subject: Re: question on operational
leave the other servers as is. not perfect from an
engineering or optimization standpoint, but good enough (which is
often a good enough solution).
thanks again.
- Original Message -
From: Priscilla Oppenheimer
Date: Friday, May 30, 2003 1:49 pm
Subject: Re: question on operational
It's good that we're getting a discussion going on this. We all understand
the theory. The real question is an operational one. Is it worth the trouble
to configure every host for a lower MTU? In his case, he doesn't need to, as
it is working, albeit with fragmentation, but should he do it in order
I've also run into something similar when I was using encrypted GRE tunnels,
where both GRE and IPSec add overhead. However in this case it is slightly
more complicated as the you can not use MTU path discovery and have to
manually decrease MTU size.
Reason for using gre with Ipsec .. to remote s
Hi Garret,
I've some experience of this also. With TCP, the "don't fragment bit is set"
so when a 1500 byte frame hits the VPN tunnel, the VPN device sends an ICMP
message back to the host saying "I need to fragment your packet but you are
telling me not to fragment" because it needs to add extra
.
cheers!
- Original Message -
From: Priscilla Oppenheimer
Date: Thursday, May 29, 2003 12:57 pm
Subject: RE: question on operational efficiency of vpn's [7:69739]
> Good questions. I wish some others would pipe in so you would get
> a bigger
> sample space, but I'll p
At 4:57 PM + 5/29/03, Priscilla Oppenheimer wrote:
>Good questions. I wish some others would pipe in so you would get a bigger
>sample space, but I'll pipe in since nobody else did yet!
>
>What do the rest of you think? The exec summary is that we're wondering how
>common it is to adjust host M
Good questions. I wish some others would pipe in so you would get a bigger
sample space, but I'll pipe in since nobody else did yet!
What do the rest of you think? The exec summary is that we're wondering how
common it is to adjust host MTU to avoid fragmentation with VPN and IPSec.
See below
03, 2003 6:58 AM
> To: [EMAIL PROTECTED]
> Subject: RE: Question about the Revised R&S CCIE Writte
> [7:66715]
>
>
> When the last exam format was introduced (September if I am
> right) the pass
> mark was 70%. Lately I heard it was around 57% (it was my grade
>
when i failed in november, it was 150 questions/3 hours/58% pass mark
-Original Message-
From: alaerte Vidali [mailto:[EMAIL PROTECTED]
Sent: Thursday, April 03, 2003 6:58 AM
To: [EMAIL PROTECTED]
Subject: RE: Question about the Revised R&S CCIE Writte [7:66715]
When the last
70%
On Wednesday 02 April 2003 05:11 pm, Mirza, Timur wrote:
> do you know what the pass mark is?
>
> -Original Message-
> From: Karsten [mailto:[EMAIL PROTECTED]
> Sent: Wednesday, April 02, 2003 3:43 PM
> To: [EMAIL PROTECTED]
> Subject: Re: Question about the Rev
When the last exam format was introduced (September if I am right) the pass
mark was 70%. Lately I heard it was around 57% (it was my grade when I
failed in September - life needs to go on).
Maybe the new exam also started at 70%. Does it?
Message Posted at:
http://www.groupstudy.com/form/read.p
do you know what the pass mark is?
-Original Message-
From: Karsten [mailto:[EMAIL PROTECTED]
Sent: Wednesday, April 02, 2003 3:43 PM
To: [EMAIL PROTECTED]
Subject: Re: Question about the Revised R&S CCIE Written Exam [7:66715]
A ccie at Boson told me it was 120.
-Karsten
A ccie at Boson told me it was 120.
-Karsten
On Wednesday 02 April 2003 02:07 pm, Zahid Hassan wrote:
> Dear All,
>
> Could someone please confirm about the number of questions in the new R&S
> written
> exam after March 28 2003 as it is not mentioned on CCIE information page.
>
> Thanks in adva
Han Chuan Alex Ang wrote:
>
> I am wondering about this question, if my vendor told me that
> their server are resided locally and I assumed that traffic out
> through my ATM with 2Mb local and 256Kb International will off
> course travelled through the 2Mb local leased line nad
> considered local
At 1:18 PM + 3/12/03, Han Chuan Alex Ang wrote:
>I am wondering about this question, if my vendor told me that their server
>are resided locally and I assumed that traffic out through my ATM with 2Mb
>local and 256Kb International will off course travelled through the 2Mb
>local leased line nad
At 1:18 PM + 3/12/03, Han Chuan Alex Ang wrote:
>I am wondering about this question, if my vendor told me that their server
>are resided locally and I assumed that traffic out through my ATM with 2Mb
>local and 256Kb International will off course travelled through the 2Mb
>local leased line nad
Thanks to the folks who responded, and who have shared a number of files.
I recently purchased the ISDN package from o..p..t..s..y..s.net - consists
of 2x2503 routers and the B-link-2 ISDN sim. I checked prices versus what I
was seeing on the auction site, and the price seemed reasonable all thin
Comments in-line
*** REPLY SEPARATOR ***
On 3/10/2003 at 4:03 AM Steiven Poh-\(Jaring MailBox\) wrote:
>Hey Guys,
>
>Can anyone please help answer just few question for my assigment? Thanks
>
>1) what is the difference of ethernet 2 and ethernet SNAP frames ?
Cisco's Ethern
hey, BT, can you contact me off line please. I have a question regarding the
firmware versions.
thanks.
chuck
--
TANSTAAFL
"there ain't no such thing as a free lunch"
""Biff Terrific"" wrote in message
news:[EMAIL PROTECTED]
> I used to have those problems only with basic-ni; I upgraded the
I used to have those problems only with basic-ni; I upgraded the firmware.
It still has the ocasional hiccup but overall it is good now.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=64826&t=64814
--
FAQ, list archives, and subscr
Chuck,
Yes I has been able to get the two channels to come up many times.
Juan Blanco
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of
The Long and Winding Road
Sent: Saturday, March 08, 2003 2:28 AM
To: [EMAIL PROTECTED]
Subject: Question on a particular I
BGP should auto sum them
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=64668&t=64581
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL
At 08:31 AM 3/6/2003 +, Mike Flanagan wrote:
>I have a question on different methods of BGP aggregation. Lets say
>for instance that I had 4 /24 that I wanted to aggregate to a /22.
>I am getting these /24's through EBGP and want to summarize them to
>my IBGP peer withought using any aggregate
Yes you can,
Do a search on IRB and CRB.
James Gosnold wrote:
>
> Excellent, thanks Priscilla.
>
> Can you configure a router to be a bridge AND a router?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=64611&t=64516
--
FAQ, li
Excellent, thanks Priscilla.
Can you configure a router to be a bridge AND a router?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=64607&t=64516
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.h
Strange that you would want to sumarise from an EBGP ro iBGP,, nomrally the
other way around :) . Withought using summary address command, you could
inject the /22 route into your local router table (eg route to null0 with
high metric), then have a distribute list which filters out any more
specif
James Gosnold wrote:
>
> Just going through the Cisco Press book in preperation for the
> CCNP remote access exam, one thing cropped up on the section
> about custom queuing that confused me.
>
> The book refers to Queue 0 which is the system queue and what
> traffic is serviced by this queue. On
The last word on I saw on this issue was that the adjaceny would still form.
You could check into the release notes for the most recent releases, but
12.1 GD and before was still doing it.
HTH,
Scott
CCIE #9340
""CiscoNewbie"" wrote in message
news:[EMAIL PROTECTED]
> Hi all. I am thinking of a
Thanks to all that responded. The problem is solved. I found an article that
related to this type of problems in 2502 routers that had an older version
of the boot rom not exerting CTS to allow the term emulator to send
information to the console port. By disabling flow control the problem was
reso
When you run your hand across the keyboard, do you touch it or is this a
psychic thing :-)
I'd check the parity on your terminal. It may be setting the wrong
parity for the router but ignoring incorrect received parity.
Marc
Jim wrote:
>
> I recently acquired a used 2501 router for my home lab t
""Jim"" wrote in message
news:[EMAIL PROTECTED]
> I recently acquired a used 2501 router for my home lab that is booting
with
> no problem. There is no configuration so it asks if you want to auto
config.
> I try to enter an N at this point and get nothing it seems as if the
> keystroke is not see
Just an FYI on waiting to take the lab.
http://www.cisco.com/en/US/learning/le3/le11/learning_ccie_lab_exam_policies
.html
Written Exam Expiry
Candidates must attempt the CCIE Lab exam within 18 months of passing the
CCIE Qualification exam. After the first lab attempt, candidates must
attempt t
; > -Original Message-
> > From: Jason Steig [mailto:[EMAIL PROTECTED]]
> > Sent: 07 February 2003 18:48
> > To: [EMAIL PROTECTED]
> > Subject: RE: question [7:62655]
> >
> >
> > cause he is the moderator. he's moderating
> >
, and he has gracefully decided
> to let us know that he is "out of the office" until the 10th?
>
> -Original Message-
> From: Jason Steig [mailto:[EMAIL PROTECTED]]
> Sent: 07 February 2003 18:48
> To: [EMAIL PROTECTED]
> Subject: RE: quest
Is it not because he belongs to the list, and he has gracefully decided
to let us know that he is "out of the office" until the 10th?
-Original Message-
From: Jason Steig [mailto:[EMAIL PROTECTED]]
Sent: 07 February 2003 18:48
To: [EMAIL PROTECTED]
Subject: RE: question [7:6265
cause he is the moderator. he's moderating
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=62657&t=62655
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure vio
=?iso-8859-1?q?ciscoGo2002?= wrote:
>
> Hello friends,
>
> I'm working with CEF and I would appreciate your help
> in this easy (I hope) question:
>
> I would like to know the meaning of "attached" and
> "receive" fields that I can see when I execute "show
> ip cef".
>
> Thanks!!!
>
>
> _
ithout the
users physically having a proxy configured
-Original Message-
From: Keyur Lavingia [mailto:[EMAIL PROTECTED]]
Sent: 05 February 2003 16:15
To: [EMAIL PROTECTED]
Subject: Re: question(routing) [7:62490]
Hi,
I notice some wccp commands in your config. Can you please tell me w
: [EMAIL PROTECTED]
Subject: Re: question(routing) [7:62490]
Hi,
I notice some wccp commands in your config. Can you please tell me where u
are using it and for what ?
Thanks,
Keyur.
"kaushalender" wrote:
Hello group,
Kindly resolve my confussion.I have
Hi,
I notice some wccp commands in your config. Can you please tell me where u
are using it and for what ?
Thanks,
Keyur.
"kaushalender" wrote:
Hello group,
Kindly resolve my confussion.I have cisco 2610 router.We r running
static routing with our service provider .No
At 08:02 AM 2/5/2003 +, kaushalender wrote:
>Hello group,
>
>Kindly resolve my confussion.I have cisco 2610 router.We r running
>static routing with our service provider .Now what is happening that
>suddely my http request stoped going out means there was no browsing on
> lan and customer I w
through the console port.
>
> -Original Message-
> From: Charles D Hammonds [mailto:[EMAIL PROTECTED]]
> Sent: Friday, January 24, 2003 12:45 AM
> To: [EMAIL PROTECTED]
> Subject: RE: Question? [7:61716]
>
> I have not been able to perfrom password recovery via a mo
s to power
cycle the router, though the person performing the IOS password recovery
procedure can be remote via a modem through the console port.
-Original Message-
From: Charles D Hammonds [mailto:[EMAIL PROTECTED]]
Sent: Friday, January 24, 2003 12:45 AM
To: [EMAIL PROTECTED]
Subject: RE
Hammonds [mailto:[EMAIL PROTECTED]]
Sent: Friday, January 24, 2003 12:45 AM
To: [EMAIL PROTECTED]
Subject: RE: Question? [7:61716]
I have not been able to perfrom password recovery via a modem connected
directly to console. When the router reloads, you get disconnected and have
to re-dial which by
that
way...
Charles
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Michael Williams
Sent: Thursday, January 23, 2003 2:24 PM
To: [EMAIL PROTECTED]
Subject: RE: Question? [7:61716]
Uh... if he could get into enable mode to issue a 'reload' command
Uh... if he could get into enable mode to issue a 'reload' command, he could
just change the password and there wouldn't be any need to do a password
recovery?!?!?
Mike W.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=61724&t=61716
-
You should be fine. Just make sure you are on the console port. Also, verify
the break sequence for your terminal emulation software.
-Original Message-
From: Gonzalez, Edwin R
Sent: Thursday, January 23, 2003 4:04 PM
To: [EMAIL PROTECTED]
Subject: Re: Question? [7:61716]
I want to do a
It is possible. just issue the 'reload' command
Lance
""Edwin Gonzalez"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I want to do a password recovery over a dialup modem conected to the
console
> port. Is it possible or do I have to be physically present at the router?
>
> ""
I want to do a password recovery over a dialup modem conected to the console
port. Is it possible or do I have to be physically present at the router?
""Captian Lance"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Depends on what you mean by dialup?
> If you can get to enable m
Depends on what you mean by dialup?
If you can get to enable mode you can restart the router. Just type
'reload'. uh don't forget to do a wri mem (copy run start).
Lance
""Edwin Gonzalez"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Is it possible to reload a router over di
Please post more info, like what you have tried and what "stuck" actually
means. (Does it come un"stuck" after a time, or do you have to reboot the
router?) What code are you using? I don't know if posting a sanitized config
would help, but it wouldn't hurt. Based on the amount of info, my only gue
i know it can be done with Multilink through a virtual template with ppp,
not sure for dsl.
a icrit dans le message de news:
[EMAIL PROTECTED]
> I've got a remote location with two ADSL lines terminating on a 2620, each
> line has a separate subnet of legal IPs. Connected to the 2620 is a PIX.
>
nice job of examination and observation. thanks.
may I suggest that CDP packets, as with ftp, tftp, or any other data
packets, are payload to the HDLC frame.
--
TANSTAAFL
"there ain't no such thing as a free lunch"
""Simmi Singla"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]..
Hi Priscilla/All,
Thanx for the reply.all are absolutely right when keepalives are exchanged
they are not compressed.i would like to mention here only keepalives.I debug
the o/p
again ,even the cdp frames are compressed.
Like to share the Debug O/P with u all for dummy setup
client-
HDLC sequences numbers aren't in data frames. They are in separate keepalive
frames. They aren't like TCP sequence numbers, which sequence the data. They
aren't in the header of the data frame. They are in separate frames in the
control plane.
Which, to make a long and winding story short, probabl
""Priscilla Oppenheimer"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> WAN compression usually compresses the data payload. The HDLC sequence
> numbers are not in data packets; they are in keepalive packets. They are
in
> the control plane, not the user plane.
>
> I can't say fo
WAN compression usually compresses the data payload. The HDLC sequence
numbers are not in data packets; they are in keepalive packets. They are in
the control plane, not the user plane.
I can't say for sure, but my guess is that they are not compressed. If they
were, the interfaces wouldn't have a
ot;Howard C. Berkowitz"
>Subject: Re: question - how many commands are there [7:60051]
>As a vague context, I weighed the 9.x command reference on my kitchen
>scale, and it was four ounces or so. 10.x was about ten ounces.
>11.x slammed the pointer beyond the limit with a loud
At 5:08 AM + 1/1/03, The Long and Winding Road wrote:
>""chris kane"" wrote in message
>[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
>> So I'm beginning my IE studies and had a thought. I wonder just how many
>> commands there are. Throw out the 3550s, and just how many commands are
>> poss
actually, even the final number is much higher than 12K
- Original Message -
From: "Vicuna, Mark"
To:
Sent: Wednesday, January 01, 2003 1:42 PM
Subject: RE: question - how many commands are there [7:60051]
> looking at the 12.2 command ref master index (sitting ha
]]
Sent: Tuesday, December 31, 2002 9:09 PM
To: [EMAIL PROTECTED]
Subject: Re: question - how many commands are there [7:60051]
""chris kane"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> So I'm beginning my IE studies and had a thought. I wonde
""chris kane"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> So I'm beginning my IE studies and had a thought. I wonder just how many
> commands there are. Throw out the 3550s, and just how many commands are
> possible on the 2600/3600 12.1 series IOS.?.
which image? ;->
>
At 8:24 PM + 12/28/02, The Long and Winding Road wrote:
>""chris kane"" wrote in message
>[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
>> > Hi
>> >
>> > Happy Holiday to all.
>> >
>> > I have some question that I would like to ask the group regarding OSPF,
> > > Fragmentation and MTU wor
> this brings up two aspects to me. one of "the standard" and one of design.
>
> Obviously, in practical terms, the OSPF standard calls for things that may
> or may not be practical in real world. So there are hacks, some of which
are
> define, some of which are proprietary.
>
> virtual link is a d
The Long and Winding Road wrote:
>
> ""chris kane"" wrote in message
> [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > > Hi
> > >
> > > Happy Holiday to all.
> > >
> > > I have some question that I would like to ask the group
> regarding OSPF,
> > > Fragmentation and MTU working together.
> > >
""chris kane"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > Hi
> >
> > Happy Holiday to all.
> >
> > I have some question that I would like to ask the group regarding OSPF,
> > Fragmentation and MTU working together.
> >
> > I have a home lab where OSPF is running find over fr
> Hi
>
> Happy Holiday to all.
>
> I have some question that I would like to ask the group regarding OSPF,
> Fragmentation and MTU working together.
>
> I have a home lab where OSPF is running find over frame-relay hub and
spoke
> configuration. The problem occurs when I tried to fragment traffic
""Khan Faisal"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi
>
> Happy Holiday to all.
>
> I have some question that I would like to ask the group regarding OSPF,
> Fragmentation and MTU working together.
>
> I have a home lab where OSPF is running find over frame-relay hub a
I don't think you'll find such a table but policy routing is fast
switched and unless your talking OC3 speeds you probably have nothing to
worry about.
Dave
Daren Presbitero wrote:
> Fellow Ciscoers,
>
> Anyone have any idea on the performance hit for a cisco 3660 using
> route-maps i
1 - 100 of 541 matches
Mail list logo
