desktops. If you install so much software
that it is such a waste of your time to create menu entries, swap to using
the original menus using menudrake.
@resolution=invalid
--
Regards,
Alex Chudnovsky
e-mail : [EMAIL PROTECTED]
ICQ : 35559910
Hi all,
I would just like to say thanks to everyone who helped me get 8.2 up and
running on my old world G3. Some people at work seem to be starting to
like it, so at least that's encouraging for the switch for the other
newer machines.
Alex
--
Alex Thurgood [EMAIL PROTECTED]
understand a bit more and find it easier going.
Alex
--
Alex Thurgood [EMAIL PROTECTED]
trying this on, since it's also the
oldest. THe others are more recent, so with any luck the installation
process should be a bit easier.
Thanks anyway for all your help.
Alex.
this doesn't actually exist at all. My question
then is this : where can I change the path to the correct modules.dep
file ? Do I have to use depmod and specify the path ? If so, how do I
get that to work on every boot ?
Alex.
--
Alex Thurgood [EMAIL PROTECTED]
(unless I'm missing
something obvious here).
Alex.
--
Alex Thurgood [EMAIL PROTECTED]
Le dim 20/07/2003 à 13:17, Christiaan Welvaart a écrit :
On 18 Jul 2003, Alex Thurgood wrote:
Internel ethernet on beige G3s is called bmac.
That's odd. When I click on the configuration tool in the Hardware
section of DrakConf, this is what it displays as the module, but the
configuration
Le dim 20/07/2003 à 13:37, Christiaan Welvaart a écrit :
On 18 Jul 2003, Alex Thurgood wrote:
Hi all,
Sound doesn't seem to working or recognized by the installation of 8.2
on my G3 OldWorld. Any pointers, hints, etc ?
I get the best results with ALSA, but I don't know if the version
of module I should be trying to load via DrakConf
(pref. with parameters, if any).
TIA,
Alex
--
Alex Thurgood [EMAIL PROTECTED]
the console, an error message is given that the
file system type of the CD is incorrect. What does this mean ? Is there
something wrong with my fstab config, or is there something wrong with
the CDs ?
Any help gratefully accepted.
Alex
--
Alex Thurgood [EMAIL PROTECTED]
Hi all,
Sound doesn't seem to working or recognized by the installation of 8.2
on my G3 OldWorld. Any pointers, hints, etc ?
Alex
the difference between pmac and the supplied ATI
driver module ? It appears that it didn't want to play with my ATI
settings.
TIA,
Alex
--
Alex Thurgood [EMAIL PROTECTED]
installing the Mandrake Linux Install.sit file, from CD,
or copying to disk and then starting. In both cases, I get the error
message The application Mandrake Linux Install.sit can not be opened
because an error of type -39 has occurred.
I all out of ideas ? Any advice ?
Alex
--
Alex Thurgood [EMAIL
for the advice, as I'm not a Mac expert, I wouldn't have known
about the Stuffit problem. I'd already read the tutorial on the Mandrake
site and guessed that I had an old world non CD-bootable system, but
then that's where I got stuck with the sit file.
Here I go...
Alex
(as with the other MDK installs on
other platforms), but when the graphical interface comes up for the
install, the screen is corrupted : monochrome, huge text, buttons
displaced, impossible to select anything. Is there a way around this
other than via a text install ?
Alex.
--
Alex Thurgood [EMAIL PROTECTED]
Le ven 11/07/2003 à 15:35, Alex Thurgood a écrit :
You were right about the install scripts, they didn't work. I started
BootX and chose all.gz as the ramdisk, and set the value to 34000. The
installation starts, asks for the install media, chose CDROM. THen the
program starts to load from
the rest free with the Mac disk utility tool and am going to try again.
Alex.
--
Alex Thurgood [EMAIL PROTECTED]
Steffen Barszus wrote:
Maybe mm has highmem integrated ? Don't know. I think it would be worth to
have the highmem patch in normal kernel, as it is not utopic to have 1 Gig of
ram in a desktop with current prices.
Seconded - my main box has 1Gb in it at the moment and the 9.1 UP kernel
- Original Message -
From: Keld
Jørn Simonsen
To: [EMAIL PROTECTED]
Sent: Thursday, June 26, 2003 11:15
AM
Subject: [Cooker] wish for mdk 9.2: file
shadow functionality
Hi!I have just been to a MS marketing seesion for their
Windows Server 2003and one of
oops, I accidentally sent a blank message. anyway, I think the file shadow
idea is a really good idea, It could be integrated into drakbackup,, and set to
run automatically.
- Alex
Please ignore the MSN email address, i'm a Linux user, I swear -- i have to
mount partitions, build kernels
Silly question, but how do I set the clock on the
computer.
I have tried hwclock, but I get an error saying
"unable to open /dev/adb read/write : : No such file or directory"
Also, ntpd doesn't seem to work. I have servers
configured, but the time never changes. Also, it there a way to
permissions for the
clock so that you can access it at a later point, or have it execute on
connect to your ppp account.
- Original Message -
From: Alex Horvath
To: [EMAIL PROTECTED]
Sent: Thursday, March 27, 2003 4:42 PM
Subject: Setting the clock
Silly question
hi all,
first, PPC 8500 w/ 2 nic, eth0 net, eth1 loc.
not quite at routing yet, still trying to set up dhcp.
First thing, I have dhclient working, and it can
get an address from my current router192.168.0.1 (it grabs
192.168.0.238). If I disconnect it (i.e. halt the machine, disconnect the
Stew,
RC1, trying to do an FTP install.
PowerComputing Powercentre 120, 112MB RAM, 2GB HD, onboard net.
First, I can't even get the installer to work
properly unless I specify root=/dev/ram3
second, if I do that, I get corrupted
video.
Third, if I put install-text before or after the
-
From: Bob Sloots [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Wednesday, March 12, 2003 6:28 PM
Subject: RE: Keeping up to date
Alex,
You can add a mirror as source for urpmi-updates, you could use following
mirror:
ftp://ftp.sunet.se/pub/os/Linux/distributions/mandrake-devel/cooker/ppc
Stew,
how difficult would it be to add hfs or FAT32 support to the installer so
you could install off a hard disk in the machine ?
I currently use FTP install, but it would be a lot faster to d/l the ISO,
mount it, copy the files to the local drive and install from there.
Just a though. BTW,
Stew,
I installed Cooker Beta 2, and would like to know how to keep it current (I
assume that there are incremental builds between ISOs).
Can you give me a play-by-play on how to keep the system up to date ? I
have seem URPMI on the lists, along with some talk of mirrors, but I don't
know what
, and it wrpas
around to the right side. Installer still works, just a little goofy
lookin'.
Again, any ideas ?
AH
- Original Message -
From: Alex Horvath [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Thursday, February 27, 2003 8:40 PM
Subject: Crash on install
Hi All,
Trying to install
I dont know if this is directly related to cooker, so i thought i'd ask anyway. I just
installed mandrake_doc-en-9.1-0.4mdk, and after it finished installing, i went to
click o nthe
new entry in kdemenudocumentation. konqueror says that the file
/usr/share/doc/mandrake/en/index.html doesn't
I dont know if this is directly related to cooker, so i thought i'd ask anyway. I just
installed mandrake_doc-en-9.1-0.4mdk, and after it finished installing, i went to
click o nthe
new entry in kdemenudocumentation. konqueror says that the file
/usr/share/doc/mandrake/en/index.html doesn't
,
Alex THurgood
a shame as I wanted to try out the PPC on my firm's Macs,
essentially to effect the transition from MSOffice to OpenOffice.org.
Never mind, looks like it's going to be YellowDog or something similar.
Alex
?
- Original Message -
From: Stew Benedict [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Tuesday, December 24, 2002 13:29
Subject: Re: X Font error
On Wed, 25 Dec 2002, Alex Horvath wrote:
Hi All.
installed mdk-ppc 8.2 from ISOs, and I have a couple of problems.
1st, major, sice i can't
for this
?
Thanks, and merry Christmas!
AH
- Original Message -
From: Alex Horvath [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Wednesday, December 25, 2002 17:10
Subject: Re: X Font error
Stew,
I had this configuration working before.
Could you please list what I should have for bootx
Hi All.
installed mdk-ppc 8.2 from ISOs, and I have a couple of problems.
1st, major, sice i can't do much now:
When I try to start X, I get the following error:
Fatal server error
Could not open default font 'fixed'
XIO fatal IO error 104 (connection reser by peer)
on X server :0.0
after 0
On Sunday 08 December 2002 12:38, James Sparenberg wrote:
On Sun, 2002-12-08 at 01:37, Alex Chudnovsky wrote:
I agree completely. What lacks sorely in XFree86, IMHO, is the fallback
mechanism - if this driver doesn't work, use another driver, and if
nothing works, use some worst case
I've recently updated my system to the newest XFree86 and now the freshly
updated RENDER extension works once yes, once no - the same KDE application
may start with aliased fonts and may start with antialiased fonts.
--
Regards,
Alex Chudnovsky
e-mail : [EMAIL PROTECTED]
ICQ : 35559910
ARE WORKED OUT.
--
Regards,
Alex Chudnovsky
e-mail : [EMAIL PROTECTED]
ICQ : 35559910
--
Regards,
Alex Chudnovsky
e-mail : [EMAIL PROTECTED]
ICQ : 35559910
Stew,
where do you get the files to update ?
I see you reference a file://, do I donwload files from somewhere using
MacOS and put them in a directory that can be read by linux ? or do i
download them in linux ?
Thanks,
AH
- Original Message -
From: Stew Benedict [EMAIL PROTECTED]
To:
Now koffice apps just refuse to run - their desktop files are invalid.
--
Regards,
Alex Chudnovsky
e-mail : [EMAIL PROTECTED]
ICQ : 35559910
On Tuesday 19 November 2002 21:07, Tibor Pittich wrote:
On 19. nov 2002 20:57, Alex Chudnovsky wrote:
Now koffice apps just refuse to run - their desktop files are invalid.
these menu file are missing. only kchart is present in /usr/lib/menu
I know that they are missing, the question
On Tuesday 19 November 2002 23:57, Tibor Pittich wrote:
On 19. nov 2002 21:41, Alex Chudnovsky wrote:
On Tuesday 19 November 2002 21:07, Tibor Pittich wrote:
On 19. nov 2002 20:57, Alex Chudnovsky wrote:
Now koffice apps just refuse to run - their desktop files are
invalid
How do i install java on Mandrake-ppc ?
I got the .bin file, but reading the installation readme says that it has
only been tested on i586 systems.
Any suggestions ?
Thanks,
AH
How does one do this, if possible ?
AH
of characters, whether font embedding is turned on or off.
When font embedding is on, only Verdana font gets embedded instead of all
the fonts used in the document, and Hebrew glyphs are just NOT EMBEDDED at
all.
--
Regards,
Alex Chudnovsky
e-mail : [EMAIL PROTECTED]
ICQ : 35559910
No, I want it RW
- Original Message -
From: Bob Sloots [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Sunday, November 10, 2002 4:27 PM
Subject: Re: [Cooker-PPC] Mounting an HFS partition at boot
On Sunday 10 November 2002 17:42, you wrote:
Hi All.
Funny thing. I have a MacOS
fonts
Thanks
Eyal.
--
Regards,
Alex Chudnovsky
e-mail : [EMAIL PROTECTED]
ICQ : 35559910
nor into Gnome Control Center
nor into any other environment-specific control center. IMHO, it's a very big
mistake and they should integrate.
Thanks to have read all ;)
Florent
--
Regards,
Alex Chudnovsky
e-mail : [EMAIL PROTECTED]
ICQ : 35559910
Keyboard layout editor just disappeared from KDE control center, and
'Configure' of kxkb just plainly doesn't work - nothing appears. What
happens?
--
Regards,
Alex Chudnovsky
e-mail : [EMAIL PROTECTED]
ICQ : 35559910
Title: Re: Mouse Problems
what other protocols are available, other than
IMPS/2 ?
Thanks,
AH
] Changing display mode
On Mon, 4 Nov 2002, Alex Horvath wrote:
Could it have something to do with my mouse ? If I try to change it
from
inside X, using the control centre, the display blanks, then when it
comes
back, it gives me an error about IMPS2 not being a correct mode.
Any
PROTECTED]
Sent: Monday, November 04, 2002 7:39 PM
Subject: Re: [Cooker-PPC] Changing display mode
On Mon, 4 Nov 2002, Alex Horvath wrote:
Hi All
I have a Supermac j900 running Mandrake 8.2PPC.
I've got an ATI Xclaim VR (Rage II) and an Apple 17 Monitor.
The current display mode
PROTECTED]
Sent: Tuesday, November 05, 2002 2:12 PM
Subject: Alex Horvath
Alex
I too have a UMAX s900 and have had trouble with configuring my adb
mouse among other things. I was wondering if I could correspond with
you about configuring my machine? my E-mail address is
[EMAIL PROTECTED]
Thank
to do anymore.
Thanks,
AH
- Original Message -
From: Stew Benedict [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Tuesday, November 05, 2002 8:07 PM
Subject: Re: [Cooker-PPC] Changing display mode
On Tue, 5 Nov 2002, Alex Horvath wrote:
Stew,
the error I get from Mandrake
, 5 Nov 2002, Alex Horvath wrote:
Stew,
the error I get from Mandrake Control Center is:
(EE)Mouse1: Unknown protocol imps2
(EE) Preinit failed for input device Mouse1
Also, of I use /dev/usbmouse, the mouse stops working. I'm currently
using
/dev/input/mice.
The default
Hi All
I have a Supermac j900 running Mandrake
8.2PPC.
I've got an ATI Xclaim VR (Rage II) and an Apple
17" Monitor.
The current display mode is 800x600 (i think the
refresh is 75).
I'd like to change the display mode to 1024x768 @75
or 85, but I can't seem to do it.
I figured out
PROTECTED]
To: [EMAIL PROTECTED]
Sent: Monday, November 04, 2002 7:39 PM
Subject: Re: [Cooker-PPC] Changing display mode
On Mon, 4 Nov 2002, Alex Horvath wrote:
Hi All
I have a Supermac j900 running Mandrake 8.2PPC.
I've got an ATI Xclaim VR (Rage II) and an Apple 17 Monitor
On Saturday 02 November 2002 23:42, Gary Greene wrote:
On Saturday 02 November 2002 04:33 pm, Alex Chudnovsky wrote:
On Saturday 02 November 2002 22:47, David Walser wrote:
Works for me. Only exception is when using over
remote X and flash is called, then it hangs. If I
killall
On Sunday 03 November 2002 03:06, Leon Brooks wrote:
On Sunday 03 November 2002 04:47 am, David Walser wrote:
Alex Chudnovsky [EMAIL PROTECTED] wrote:
The recent Konqueror ( 3.1 rc1 ) just hangs when trying to load
Netscape plugins. The nspluginviewer process is in the 'D' state,
probably
as there are 32
channels. There is almost no reason for artsd even to exist in this case
- as the sound channel mixing is done in HARDWARE.
Using OSS? Tried ALSA?
Using ALSA.
Cheers; Leon
--
Regards,
Alex Chudnovsky
e-mail : [EMAIL PROTECTED]
ICQ : 35559910
of XMMS and artsd with ALSA that does the lockup.
Switched to OSS and it's working fine (this application at least).
MIDI? ALSA does support MIDI, OSS doesn't support it yet.
Bye
--
Regards,
Alex Chudnovsky
e-mail : [EMAIL PROTECTED]
ICQ : 35559910
Hi All
I have a Supermac j900 running Mandrake
8.2PPC.
I've got an ATI Xclaim VR (Rage II) and an Apple
17" Monitor.
The current display mode is 800x600 (i think the
refresh is 75).
I'd like to change the display mode to 1024x768 @75
or 85, but I can't seem to do it.
I figured out
?
--
Regards,
Alex Chudnovsky
e-mail : [EMAIL PROTECTED]
ICQ : 35559910
On Saturday 02 November 2002 22:47, David Walser wrote:
Works for me. Only exception is when using over
remote X and flash is called, then it hangs. If I
killall nspluginviewer I'm back in business.
I can't kill it, that's a problem. And the X is local, not remote.
--
Regards,
Alex
I've encountered some strange behavior of the recent Konqueror regarding
www.mandrakeforum.org - as I try to enter some article page containing
comments, the page just constantly refreshes and never stops. Is there
anybody with the same problem?
--
Regards,
Alex Chudnovsky
e-mail : [EMAIL
is always the same.
--
Regards,
Alex Chudnovsky
e-mail : [EMAIL PROTECTED]
ICQ : 35559910
__
Do you Yahoo!?
HotJobs - Search new jobs daily now
http://hotjobs.yahoo.com/
__
Do you Yahoo!?
HotJobs - Search new jobs daily now
http://hotjobs.yahoo.com/
--
Regards,
Alex Chudnovsky
e
On Wednesday 30 October 2002 18:05, David Walser wrote:
--- Alex Chudnovsky [EMAIL PROTECTED] wrote:
Did somebody try to run NVIDIA proprietary drivers
with 2.4.19-18mdk? Somehow
with these drivers X works very slowly and finally
hangs.
Independent of Mandrake's kernels, I've seen
As the subject says, I've installed the newest printer-drivers, and suddenly
x11 devices disappeared from ghostscript.
--
Regards,
Alex Chudnovsky
e-mail : [EMAIL PROTECTED]
ICQ : 35559910
On Wednesday 30 October 2002 18:13, David Walser wrote:
--- Alex Chudnovsky [EMAIL PROTECTED] wrote:
On Wednesday 30 October 2002 18:05, David Walser
wrote:
--- Alex Chudnovsky [EMAIL PROTECTED]
wrote:
Did somebody try to run NVIDIA proprietary
drivers
with 2.4.19-18mdk
Gnomes Bugzilla with
Cooker specific problems.
Alex
www.bennee.com/~alex/
A few questions about this (and other Mandrake lists):
Is there an option to have a daily digest instead of individual mails?
Is there an easy to search archive?
Have MandrakeSoft considered using something like mailman?
Alex
www.bennee.com/~alex/
?
- Original Message -
From: Jason Marsh [EMAIL PROTECTED]
Date: Fri, 2 Aug 2002 21:50:22 -0800
To: [EMAIL PROTECTED]
Subject: Re: [Cooker] new rpmdrake (i know, i
know... but please read)
On Friday 02 August 2002 1:14 pm, Alex Perry
wrote:
i used the old rpmdrake to update from
compiling everything went fine, but when i went to
run it, i get the error
qtella: relocation error: qtella: undefined symbol:
__ti7QDialog
any ideas what this is/how to fix it?
--
Get your free email from www.linuxmail.org
Powered by Outblaze
i used the old rpmdrake to update from the cooker
all the time. i'd update the list, and select
everything with that icon beside it. now, with the
new rpmdrake, what do i do? how do i install all the
updated packages off the cooker ftp?
--
Get your free email from www.linuxmail.org
one: when you start kde, and it loads ksirc from the
previous session, the screen goes black with a
dialog popping up asking for input. esc. bypasses
this and displays the desktop correctly.
two: more of a suggestion, but in software mamager,
i'd like to be able to horizontally scroll
PROTECTED]
Subject: Re: [Cooker] SDL apps wont run - seg fault
Alex Perry [EMAIL PROTECTED] writes:
i've tried running several different games using
SDL, and they all segfault. i tried chromium,
frozen-bubble, and barrel patrol 3d.
It works for me.. are you using nvidia drivers
Good Stuff! Congrats Mandrake!
- Original Message -
From: Philippe Coulonges [EMAIL PROTECTED]
Date: Sun, 28 Jul 2002 19:31:25 +0200
To: [EMAIL PROTECTED]
Subject: [Cooker] Cheers
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Just look in
i've tried running several different games using
SDL, and they all segfault. i tried chromium,
frozen-bubble, and barrel patrol 3d.
these are the last few lines of bp3d loading:
loaded object_barrel : 18400 bytes
loaded object_missile_1 : 4332 bytes
loaded object_tank_1 : 19592 bytes
Am Fre, 2002-07-12 um 23.31 schrieb aleX Kiausch:
Hi
I did a fresh install a few minutes ago, using hd.img
The USB Keyboard is still not recognized in XDrake (I switched to PS/2
when I had to)
the IDE Burner is not 'ide-scsi'ed
Mozilla is not working because of a few not installed
Hi
I did a fresh install a few minutes ago, using hd.img
The USB Keyboard is still not recognized in XDrake (I switched to PS/2
when I had to)
the IDE Burner is not 'ide-scsi'ed
Mozilla is not working because of a few not installed pakets-I installed
libjs, mozilla js debugger,
Am Die, 2002-07-09 um 11.07 schrieb Pixel:
aleX Kiausch [EMAIL PROTECTED] writes:
I did a fresh install from my fresh mirrored cooker yesterday. Still the
my USB-Keyboard doesn't work during the installation process. CD-Burners
are not recogniezed automatically
can you mail me
I did a fresh install from my fresh mirrored cooker yesterday. Still the
my USB-Keyboard doesn't work during the installation process. CD-Burners
are not recogniezed automatically (but when I tell XDrake to install
GnomeToaster they will be rcognized). I had to rebuild Mozilla, after
installation
I updated my Cooker tis morning (all the new kde 3.0.2 Stuff) and now
all of a sudden when I start Mozilla or Galeon in Gnome the panel
disapears and the frames of all open windows ... anybody here knows what
I'm talking about? Is this a Gnome or a Sawfish issue? Any ideas?
Thanx
On all mirrors are two versions of wmfishtime, why ? I always get
'duplicate version' errors of mkcd ...
Is there a reason for that?
aleXander
p.s. Did anyone manage to compile cdrdao with cooker?
Am Mit, 2002-06-26 um 14.21 schrieb Austin Acton:
Okay kids, you asked for it...
I installed the cooker iso posted recently and then updated to the
current cooker, and I found a few bugs that have been around since
before 8.2 came out. Can we work on them?
1. During install, screen says
Am Son, 2002-06-23 um 17.00 schrieb Robert Fox:
On Sat, 2002-06-22 at 21:05, aleX Kiausch wrote:
Am Sam, 2002-06-22 um 20.17 schrieb Robert Fox:
On Sat, 2002-06-22 at 19:56, aleX Kiausch wrote:
Hi everybody
When I try to make a fresh install from the rsynced cooker i get
Hi everybody
When I try to make a fresh install from the rsynced cooker i get the
following errormessage:
depslist.ordered mismatch against hdlist files
What's up?
Am I wrong or the mirror I get it from?
please help
Am Sam, 2002-06-22 um 20.17 schrieb Robert Fox:
On Sat, 2002-06-22 at 19:56, aleX Kiausch wrote:
Hi everybody
When I try to make a fresh install from the rsynced cooker i get the
following errormessage:
depslist.ordered mismatch against hdlist files
What's up?
Am I wrong
Am Sam, 2002-06-22 um 20.36 schrieb Wesley J Landaker:
Unless he's syncing from the same place as me (sunet.se) then there is
something wrong, because I get the same error here on a fresh install
(as of about 5 minutes ago
gnome-vfs-extras-0.99.0-2mdk.i586.rpm has 0 Byte
Is that correct ?!
Am Mon, 2002-06-10 um 09.40 schrieb Warly:
aleX Kiausch [EMAIL PROTECTED] writes:
Hi,
I'd like to get involved in evaluing MandrakeLinux. So I mirrored cooker
( I think I got it all now; I used wget ...) but when I try to make
Iso-Images by using MakeCd in the /misc/ - Dir the first
:
aleX Kiausch [EMAIL PROTECTED] writes:
Hi,
I'd like to get involved in evaluing MandrakeLinux. So I mirrored cooker
( I think I got it all now; I used wget ...) but when I try to make
Iso-Images by using MakeCd in the /misc/ - Dir the first CD refuses
Hi
... meanwhile i got the snapshot iso images. When i try to install them
drakX shows up and everything
works fine until gnome-doc.rpm(shortly before the installation of rpm's
should be finished) got installed then nothing happens
anymore and the installation stops with no erreors or anything,
Hi,
I'd like to get involved in evaluing MandrakeLinux. So I mirrored cooker
( I think I got it all now; I used wget ...) but when I try to make
Iso-Images by using MakeCd in the /misc/ - Dir the first CD refuses to
be build. There's an errormessage stating that there's no isolinux.bin -
but
websites CVS
pages (under software) but its not fully integrated yet.
Enjoy,
Alex.
function setup_shaping ()
{
# Setup POSTROUTING marking on dsl output
# needed for QoS type hacks
# 1 - outgoing interactive (ssh)
# 2 - outgoing file stuff (www)
# 3 - incomming
?)
3. Do you use cooker to build packages for cookfire (same as Q2 I guess)?
I'm currently updateing our RPM's for the user-mode speedtouch driver
(speedtouch.sf.net) so I'll be testing them on cookfire once I get it
installed.
Alex
www.bennee.com/~alex/
that may be).
Regards,
Alex
www.bennee.com/~alex/
Hi,
I've tried recently to upgrade my kdebase kdelibs to the newest cooker ones
- and for several recent versions, konqueror crashes when trying to view
linuxtoday.com. Is that just me or is there some bug in konqueror?
Thanks.
--
Regards,
Alex Chudnovsky
e-mail : [EMAIL PROTECTED]
ICQ
-
Linux-oriented site not working with Linux-oriented browser? Bad :-(
--
Regards,
Alex Chudnovsky
e-mail : [EMAIL PROTECTED]
ICQ : 35559910
1 - 100 of 178 matches
Mail list logo
