[Elecraft] K3 Beta Firmware 4.81 Release Notes, Retracted

Oops, I now see that the necessary information is listed in the release notes, but under an earlier beta that I seem not to have. Sorry. 73, Paul W8TM __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help

Re: [Elecraft] [P3] Marker cursor

to make the problem occur? Thanks, Paul -- View this message in context: http://elecraft.365791.n2.nabble.com/P3-Marker-cursor-tp7583477p7583493.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing

Re: [Elecraft] Application to capture SVGA screen (P3) info in a file format?

to take a picture of the P3 display, use the P3 Utility and select the Capture Image tab. -Paul -- View this message in context: http://elecraft.365791.n2.nabble.com/Application-to-capture-SVGA-screen-P3-info-in-a-file-format-tp7583236p7583239.html Sent from the Elecraft mailing list

[Elecraft] Odd K3 Behavior

a KPA500 and a PC connected to the rig, if that is relevant. I've not tried to duplicate the trouble with everything disconnected yet. Any ideas? 73. Paul WW2PT __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft

Re: [Elecraft] Odd K3 Behavior

Thanks to all who have replied on- and off-list. I will start by cleaning the connector pins as best I can and reseating the front panel. This appears to be the most obvious place to start. I’ll report back with the results. 73, Paul WW2PT On Jan 17, 2014, at 9:27 AM, Don Wilhelm w3

Re: [Elecraft] K3 #7841

Thanks to the guys who pointed me in the direction of the K3 menu. I'd wrongly assumed it was something at the computer end. Baud rate now accelerated. 73, Paul EI5KI __ Elecraft mailing list Home: http://mailman.qth.net/mailman

[Elecraft] K3 #7841

, I have the latest Elecraft supplied USB to RS232 convertor. I am able to talk to the K3 from the laptop, but only at 4800 baud. What might I need to do to get that going a bit faster? 73, Paul EI5KI K2, KX1 and K1 builder and now K3 builder too

Re: [Elecraft] K3/0 Remote setup and Brainboxes

Thanks for your information, John. This morning I went on the Brainboxes web site and took advantage of their support page. All is set up and fine now. 73, Paul K9NU __ Elecraft mailing list Home: http://mailman.qth.net/mailman

[Elecraft] K3/0 Remote setup and Brainboxes

control using my external IP. Any suggestions or direction would be much appreciated. 73, Paul K9NU __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post

Re: [Elecraft] P3 SVGA USB Hub usage?

Hi Sam, The USB port on the P3/SVGA does not support hubs. 73, Paul -- View this message in context: http://elecraft.365791.n2.nabble.com/P3-SVGA-USB-Hub-usage-tp7582492p7582493.html Sent from the Elecraft mailing list archive at Nabble.com

[Elecraft] AF1 Audio Filter Question

the LM386 chip might be damaged. - Paul N6LQ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net

Re: [Elecraft] AF1 Audio Filter Question

- but then the AF1s audio output is too low to be enjoyable. Suppose I could just do a mod to replace the AF1's stereo out jack with a monaural one, and then using an adapter plug between the output and my stereo phones, but would like to leave the AF1 unmodified if possible. R, Paul N6LQ

Re: [Elecraft] XG3

Hi Bruce, Go ahead and give me a call here at Elecraft and I'll explain exactly how to set it up. 73, Paul Saffren N6HZ Project Manager Elecraft Inc. 831-763-4211 -- View this message in context: http://elecraft.365791.n2.nabble.com/XG3-tp7581914p7581955.html Sent from the Elecraft

[Elecraft] K1 Power Out vs. Current Draw

is that displayed by the K1, that is, after reduction for the loss in the polarity-protection diode. 73, Paul W8TM __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post

Re: [Elecraft] P3 SVGA USB Keyboard transmission controls

Hi Sam, Version 1.16 of the P3/SVGA firmware sends the text assigned to a key without respecting the current Tx mode (VOX, CR, etc). I've since fixed this and it will be included in the next firmware release, which hopefully will be available for beta testing soon. 73, Paul -- View

[Elecraft] Horizontal Chaff in P3 Waterfall and Brief K3 Deafness

believe my equipment config changed much between contests, except for moving my mic around, exposing more mic cable. Any ideas about what my problem might be? Thanks for any suggestions, -Paul, N1HEL __ Elecraft mailing list Home

Re: [Elecraft] OT: Crimping small wires

Yes, the doubling over method has worked very well for me (solderless) with stranded wire and manual crimping. Holds very tightly. -Paul, N1HEL - Original Message - From: Edward R Cole kl...@acsalaska.net To: Elecraft@mailman.qth.net Sent: Wednesday, December 11, 2013 9:41 AM

Re: [Elecraft] K3 Powerpole Replacement

into the housing). But they seem to hold very solidly for me. I crimp the conductors with pliers (no assembly tool). -Paul, N1HEL On Sun, Dec 8, 2013 at 5:45 PM, Jeff Cochrane jeffvk...@gmail.com wrote: Hi everyone, Has anyone on the list replaced the Anderson powerpoles on their K3's

Re: [Elecraft] KX3 Accuracy of clock

I checked the time on my kx3 last night. After 5 weeks it hasn't changed or maybe a few seconds. Did I get the bad one out of the batch! Paul K7PM On Tuesday, December 3, 2013, Edward R Cole kl...@acsalaska.net wrote: Not sure how all this commentary on computer time applies to the topic title

Re: [Elecraft] P3 Problem

, Paul -- View this message in context: http://elecraft.365791.n2.nabble.com/P3-Problem-tp7581397p7581406.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman

[Elecraft] Trouble Scanning (K3)

I tried that but it still does not get the VFO B freq from memory to actual VFO B 73 Paul I've noticed this when B is not on same band as A. Try A-B and recall your memory again --  Pierfrancesco Caci * * Today at 2:27 AM To * paul ecker  * paul ecker

[Elecraft] Trouble Scanning (K3)

A and the Stop in VFO B. I have also saved the desired mode with each memory pair.   So obviously I am missing something in this process but it’s not apparent to me in the manual nor could I find in the archives. So what am I missing?     73 Paul kc2nyu

[Elecraft] K3 Losing sub receiver when I put SPLIT on...

I am experiencing cockpit error. I have pushed a button somewhere on the front panel and lose my audio on the sub receiver when I go into split mode...what can I do to recover that capability?? -- Paul VanOveren 5911 Snow Av Alto, Mi 49302 (616) 868-7149

Re: [Elecraft] Reliable DC Power Supply for K3/P3

. . . The Astron is now the backup. 73, Paul VE1DX __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http

Re: [Elecraft] K3 temperatures?

Sensor calibrations been performed as detailed in the K3 Owner's Manual? 73, Paul W8TM __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft

[Elecraft] OT upcoming dxpeditions

With Banaba in the log on 5 bands now, need ONE more for the Honor Roll. Anyone here know of any upcoming DXpediitions to Baker Howland, Bouvet, Eritrea, Mellish Reef, Pratas Isl, San Felix, S Georgia, or S.Sandwich...anxious waiting for one of them, or more 73, NF8J -- Paul VanOveren 5911

[Elecraft] K3/0 local site software

machines. Can anyone suggest a Windows 8, 64 bit, compatible software similar to Eltima's Serial to Ethernet Connector without this limitation (maybe even freeware)? 73, Paul K9NU __ Elecraft mailing list Home: http://mailman.qth.net/mailman

Re: [Elecraft] P3 display hanging

problem and let me know. -Paul -- View this message in context: http://elecraft.365791.n2.nabble.com/P3-display-hanging-tp7580651p7580682.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list

Re: [Elecraft] P3 display hanging

That's great Tim, glad you got it working. This is one of the reasons Elecraft uses FTDI chip sets in the KXUSB and KUSB cables. -Paul Paul Saffren - N6HZ Project Manager Elecraft Inc. 831-763-4211 x122 www.elecraft.com On 11/11/2013 8:28 AM, Tim Cook wrote: Paul, I was using the fixed

[Elecraft] K3 no reception CW

Hi gang I have a very strange condition with my K3. Absolutely no reception in CW mode on any band. There is dead quiet, no noise no static. It looks as though I can xmit CW, as the red LED lights. All other modes are working normally Thoughts? Suggestions? 73 NU4C

Re: [Elecraft] [P3} SVGA resolution text decoding, etc.

the K360 wireless keyboard from Logitech. They are inexpensive and work extremely well. 73, Paul -- View this message in context: http://elecraft.365791.n2.nabble.com/P3-SVGA-resolution-text-decoding-etc-tp7580521p7580535.html Sent from the Elecraft mailing list archive at Nabble.com

Re: [Elecraft] Keyboard for P3 SVGA

Hi Jim, The keyboard I use here is the Logitech K360. You can usually find them at a great discount from Staples and Amazon. Technically speaking, the USB stack on the SVGA board is looking for a basic PC BIOS keyboard. 73, Paul -- View this message in context: http://elecraft.365791

[Elecraft] [KX1] ATU killed my new KX1?

idea what have I done, and how to un-do it? Thank you -- Paul __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted

Re: [Elecraft] [KX1] ATU killed my new KX1?

Well, some days I'm dumber than others. It was the keyer, not fully seated or had a bit of crud shorting it or ??? Unplugged it and now all is well. Checked out the keyer and it seems fine. Plugged it back in still fine. I'm writing it off gremlins and/or leprechauns. So now my internal

[Elecraft] A an old-new KX1 build

with an eye to the future? I've also written to Elecraft, but trying to cover all bases before I heat up the iron. Much thanks.. Paul __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http

Re: [Elecraft] XG3 set up

Hi David, One thing to check that is fairly common is the 3.5mm serial jack which plugs into the top of the XG3. Just make sure that it's fully inserted into the top. If you're still having trouble, please contact Elecraft support for additional help. 73, Paul -- View this message

[Elecraft] K3/0 tx audio problem

need bias will not work if bias is applied. I also had an open RF choke in the PTT IN line on my K3/100 which was causing PTT issues. Thanks for responding - much appreciated. 73, Paul K9NU __ Elecraft mailing list Home: http

[Elecraft] K3/0 tx audio problem

defection. Any suggestions? 73, Paul K9NU __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http

[Elecraft] K3 Roofing filters

provide roofing. 73, Paul EI5KI __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please

Re: [Elecraft] P3 Query

David, Simply press the MENU button on the front of the P3, then using the SELECT knob, scroll through the menu until you get to VFO CURSOR TYPE . Then press the SELECT knob in to toggle between U and BAR . 73, Paul -- View this message in context: http://elecraft.365791.n2.nabble.com

[Elecraft] rcv ON xmit

have used this set up for digimode PTT and keyboard CW for 3 or 4 yrs with my K3. Today was the first time I have ever encountered this phenomenon. Be careful 73 NU4C Paul __ Elecraft mailing list Home: http://mailman.qth.net/mailman

Re: [Elecraft] P3 SVGA display problem 1920x1080

monitor if it has the capability or try using a different monitor. We've had very good results using Acer monitors. 73, Paul -- View this message in context: http://elecraft.365791.n2.nabble.com/P3-SVGA-display-problem-1920x1080-tp7579216p7579237.html Sent from the Elecraft mailing list archive

[Elecraft] Glitch in N1MM

. and no love...still want to send the current time, can anyone help... 73, NF8J -- Paul VanOveren 5911 Snow Av Alto, Mi 49302 (616) 868-7149 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http

Re: [Elecraft] P3 SVGA; chars randomly omitted during Tx

get the K360 installed. 73, Paul Paul Saffren - N6HZ Project Manager Elecraft Inc. 831-763-4211 x122 www.elecraft.com On 9/11/2013 3:27 PM, stew...@g3ysx.org.uk wrote: Thanks Paul, I have ordered one of these, but I now have a doubt. The issue with keyboard selection is seemingly

Re: [Elecraft] P3 SVGA; chars randomly omitted during Tx

these, nor does it support external hubs. 73, Paul -- View this message in context: http://elecraft.365791.n2.nabble.com/P3-SVGA-chars-randomly-omitted-during-Tx-tp7572341p7578826.html Sent from the Elecraft mailing list archive at Nabble.com

Re: [Elecraft] P3 SVGA RTTY decode question

. Another common problem is when the K3 utility is connected along with the P3/SVGA. You cannot have both operating at the same time. 73, Paul -- View this message in context: http://elecraft.365791.n2.nabble.com/P3-SVGA-RTTY-decode-question-tp7578289p7578293.html Sent from the Elecraft mailing

[Elecraft] What have I done? - RTTY

the amp keying line. 73, Paul VE1DX __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please

[Elecraft] XG3 version 1.16 firmware now available

element of the first character in a Morse string was being omitted. 73, Paul (n6hz) -- View this message in context: http://elecraft.365791.n2.nabble.com/XG3-version-1-16-firmware-now-available-tp7577887.html Sent from the Elecraft mailing list archive at Nabble.com

Re: [Elecraft] K3 Front Panel

Mike, my K3 w/sub rx, at start up, the Front Panel is 15C and the PA temp is 28, how does yours compare? PaulNF8J On Mon, Aug 19, 2013 at 12:02 PM, Mike Harris mike.har...@horizon.co.fkwrote: 61C is not very warm it is too hot to touch. How does it compare by finger with the other unit

[Elecraft] KX3 BC Breakthrough

in Dublin, EI. 73, Paul EI5KI (and M0CDP) __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net

Re: [Elecraft] Scroll SVGA Received Info: added feature

Hi Steve, Adding more memory to the SVGA is simply not feasible. Have you tried using the scroll-lock key to freeze the display? Paul -- View this message in context: http://elecraft.365791.n2.nabble.com/Scroll-SVGA-Received-Info-added-feature-tp7576932p7577004.html Sent from

Re: [Elecraft] scroll SVGA Received Info: Added Feature

the data Rx and/or Tx windows larger. Paul -- View this message in context: http://elecraft.365791.n2.nabble.com/scroll-SVGA-Received-Info-Added-Feature-tp7576888p7576915.html Sent from the Elecraft mailing list archive at Nabble.com

Re: [Elecraft] Bright line in bar cursors

Hi Steve, I talked with Alan about this and it looks like it is something we could add, probably via a menu entry. We'll put it on the to-do list. Paul Paul Saffren - N6HZ Project Manager Elecraft Inc. 831-763-4211 x122 www.elecraft.com On 7/14/2013 7:23 PM, WX2S [via Elecraft] wrote: Hi

Re: [Elecraft] OT - anyone have experience with effects of metalroofs on antenna performace?

, and an email is sent daily to anybody interested in that subject upon request. Hope something could be done about that. Paul Chebi Kk4ptv Sent from my iPhone On Jul 5, 2013, at 6:46 PM, Phil Shepard ph...@riousa.com wrote: Ah, memories … I took an antenna class from Balanis, and we used photo

[Elecraft] OT - anyone have experience with effects of metal roofs on antenna performace?

antennas. There's a SteppIR on a tower about 20 feet from a corner of the roof. The antenna is about 30 feet higher than the highest point of the roof. I'd appreciate learning from anyone with relevant experience or technical expertise related to this. Many thanks. 73s, Paul VA3LX

[Elecraft] K3: Order KAT3 with KPA500+KAT500

HI, Should I order KAT3 if my plan to use  KPA500+KAT500 with a K3 all the time(with a different output power as required)? What I found is that I should bypass KAT3 with  KPA500+KAT500 in use. Does it mean I do not need KAT3? Thanks,  Pavel VA6AM

Re: [Elecraft] looking for iPad software

Does RUMlog work with Windows ? Tnx Paul kc2nyu Message: 20 Date: Sat, 29 Jun 2013 13:27:28 -0700 From: Jeff Ellis driftenli...@gmail.com To: bill.va...@gmail.com Cc: elecraft list elecraft@mailman.qth.net Subject: Re: [Elecraft] looking for iPad software Message-ID

Re: [Elecraft] looking for iPad software

OK, thanks Fred for feedback. 73 Paul kc2nyu From: Fred Smith m...@totalhighspeed.com To: 'paul ecker' ecke...@yahoo.com; Elecraft@mailman.qth.net Sent: Sunday, June 30, 2013 8:51 AM Subject: RE: [Elecraft] looking for iPad software No it does

Re: [Elecraft] P3/SVGA

Hi Giuliano, We have talked about providing text on the display of the P3 but it would only be for when an SVGA card is not present. Using the SVGA with a keyboard and larger display is really a better way to take advantage of the data display feature. 73, Paul -- View this message

Re: [Elecraft] RS-232 over WiFi

I purchased a refurbished NETGEAR WNCE2001-100NAR from Newegg.com. Works great. 73, Paul K9NU __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post

[Elecraft] Lost CW decode on P3 SVGA display

Somehow I have lost the bottom portion of the P3 SVGA display on my large monitor. Can someone tell me how to get it back ? The waterfall and spectrum displays are fine... -NF8J - Paul VanOveren 5911 Snow Av Alto, Mi 49302 (616) 868-7149

Re: [Elecraft] KXPA100: Manual antenna switching and output power limit questions

and a dipole on ANT1 etc. This will be configurable using the KXPA Utility. 73, Paul -- View this message in context: http://elecraft.365791.n2.nabble.com/KXPA100-Manual-antenna-switching-and-output-power-limit-questions-tp7575571p7575577.html Sent from the Elecraft mailing list archive

Re: [Elecraft] RF problem Serial to Serial cable with built-in chokes

to serial cable with built-in chokes is unavailable, should I expect much better results from snap on Fair-Rite chokes over Radio Shack chokes? Thanks 73, Dick- K9OM -- /* * Amateur Radio Station AC0HY* * W. Paul Mills

[Elecraft] K3: anyone using Sennheiser HMD 280 Pro?

this headset with a K3? Do they drive the mic input well enough? I think I read that the K3 mic input will deal with just about anything but the HMD 280 Pro is pretty pricey, so I want to do some research first! 73 Paul M0CVX __ Elecraft

Re: [Elecraft] SVGA SCROLL

Hi Stephen, Currently there are no plans to add scrolling of the Rx or Tx data windows on the SVGA. You can however use the Scroll Lock key on the keyboard to freeze the data display. 73, Paul -- View this message in context: http://elecraft.365791.n2.nabble.com/SVGA-SCROLL

Re: [Elecraft] XG3, new beta 1.16 firmware now available for download

Pierfrancesco, The current version of the Utility should work fine. I am speaking with our Mac/Linux developer on bringing it up to the latest revision. 73, Paul Paul Saffren - N6HZ Project Manager Elecraft Inc. 831-763-4211 x122 www.elecraft.com On 5/30/2013 3:16 AM, Pierfrancesco Caci

[Elecraft] TRX-Manager and the K3--Recent Experience?

to be doing remote control, and I already use LOGic for my logging (although TRX-Manager's log itself looks quite good). Are there any recent (or on-going) problems with the K3 implementation that I should be aware of? Thanks a lot, -Paul, N1HEL -- View this message in context: http

[Elecraft] XG3, new beta 1.16 firmware now available for download

prompts. If you have any questions or require additional help, please email me directly pauls ... at ... elecraft... 73, Paul -- View this message in context: http://elecraft.365791.n2.nabble.com/XG3-new-beta-1-16-firmware-now-available-for-download-tp7574435.html Sent from the Elecraft

Re: [Elecraft] XG3, new beta 1.16 firmware now available for download

Make sure you are using the latest version of the XG3 Utility, version 1.13.4.28 available from our website, HERE http://www.elecraft.com/XG3/XG3_Utility_Setup_1_13_4_28.exe 73, Paul -- View this message in context: http://elecraft.365791.n2.nabble.com/XG3-new-beta-1-16-firmware-now

Re: [Elecraft] XG3_Signal_Source

down there but you would sacrifice the upper frequencies in doing so. I haven't tried it personally, so I cannot guarantee the outcome. Regarding modulation, I looked into that a while ago and found that the PLL lock time of the CS2100CP is too long to allow for any type of modulation. 73, Paul

[Elecraft] SVGA brightness (K3)

 in the waterfalls on both displays. Maybe that is just the way it is. I have tried adjusting SVGA bias (didn't see noticeable difference) and LCD brightness. 73 Paul kc2nyu __ Elecraft mailing list Home: http://mailman.qth.net/mailman

Re: [Elecraft] waterfall marker on SVGA

Waterfall markers are not implemented on the SVGA display at this time. It's on the bug/feature list. 73, Paul -- View this message in context: http://elecraft.365791.n2.nabble.com/waterfall-marker-on-SVGA-tp7573892p7573920.html Sent from the Elecraft mailing list archive at Nabble.com

[Elecraft] SVGA brightness (K3)

Alan- thanks tried both your recommendations and did help. On Waterfall Clr- I have default colors selected. Tnx  Paul kc2nyu From: Alan Bloom n...@sonic.net To: elecraft@mailman.qth.net Subject: Re: [Elecraft] SVGA brightness (K3) Message-ID: 519a4816.3060...@sonic.net Content-Type: text

[Elecraft] SVGA brightness (K3)

or the SVGA manual. I am sure it's thee but can't find it.  Tu and 73 Paul kc2nyu __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net

Re: [Elecraft] SVGA Adapter and Computer Link Failure

simply don't have the resources to test every possible configuration. My guess is that CommCat is not seeing replies to its queries in a timely manner. One thing to try is to lower the baudrate between the P3 and the PC. 73, Paul -- View this message in context: http://elecraft

Re: [Elecraft] SVGA Adapter and Computer Link Failure

simply don't have the resources to test every possible configuration. My guess is that CommCat is not seeing replies to its queries in a timely manner. One thing to try is to lower the baudrate between the P3 and the PC. 73, Paul -- View this message in context: http://elecraft

Re: [Elecraft] P3 point and click with mouse

Mike is right, I use N1MM for contest logging and if you move the mouse out of the logging box you lose that function cus the mouse is in the wrong place...you lose the focus of the mouse. It would be nice to be able to do it another way. NF8J Paul On Tue, Apr 30, 2013 at 7:58 AM, Mike K2MK k

Re: [Elecraft] Elecraft Speakers for K3

, and only $49.00 each at AES... NF8J Paul On Tue, Apr 23, 2013 at 3:15 PM, Mike Rodgers mikerodgerske5...@yahoo.comwrote: Most are satisfied with small speakers and some like the big 8-12 ones that seem to cut some of the high frequency hiss. It's not one size fits all and even a particular speaker

Re: [Elecraft] P3 halts?

Hi Emory, Have you tried performing a parameter reset on the P3? Do this by powering off the P3 and then while holding the MENU button, press the POWER key. If that does not work, please call Elecraft customer support at 831-763-4211 , or email them at k3support@ 73, Paul -- View

[Elecraft] KX3 lithium battery charger

I naively purchased AA lithium batteries for my KX3 and thought it would charge them only to find out it won't. Anybody have a suggestion or experience with a AA lithium charger they would recommend? Paul KA5SUN __ Elecraft mailing list

[Elecraft] Chinese Broadcast on 18 .180.mhz

Anybody else hearing this, 9:00 EDST in Michigan s-9 NF8J -- Paul VanOveren 5911 Snow Av Alto, Mi 49302 (616) 868-7149 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net

Re: [Elecraft] Cancel XG3 morse tx?

another field to the Info command) would require quite a bit more programming which I cannot devote to at this time due to existing demands. 73, Paul -- View this message in context: http://elecraft.365791.n2.nabble.com/Cancel-XG3-morse-tx-tp7572629p7572684.html Sent from the Elecraft

Re: [Elecraft] [P3SVGA] Missing Fn key display on P3 after installing P3SVGA

a thumb drive, then use Usav to save or Urst to restore. SVGASET.SAV is the binary file that is created/read on the thumb drive. 73, Paul -- View this message in context: http://elecraft.365791.n2.nabble.com/P3SVGA-Missing-Fn-key-display-on-P3-after-installing-P3SVGA-tp7572557p7572622

Re: [Elecraft] P3 SVGA; chars randomly omitted during Tx

Richard, Does this only happen with text message (memory) playback? 73, Paul __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft

Re: [Elecraft] P3 SVGA; chars randomly omitted during Tx

, how fast is your WPM set to? And do the missed characters show in the K3 sub display? -Paul -- View this message in context: http://elecraft.365791.n2.nabble.com/P3-SVGA-chars-randomly-omitted-during-Tx-tp7572341p7572412.html Sent from the Elecraft mailing list archive at Nabble.com

Re: [Elecraft] [P3] USB Screen capture

.Just curious, what brand and model are the ones you are trying? Maybe try a different brand. Also note that the SVGA USB port does not support hubs. If you're still having trouble, give me a call at the factory. 73, Paul -- View this message in context: http://elecraft.365791.n2

Re: [Elecraft] [P3] USB Screen capture

Bob, Correct, the file system running on the USB stack on the SVGA only supports FAT16 and FAT32 disk formats. Inserting a drive using the NTFS format will result in the message Error initializing device. 73, Paul -- View this message in context: http://elecraft.365791.n2.nabble.com

Re: [Elecraft] P3 SVGA; chars randomly omitted during Tx

Hi Richard, For sending CW from the keyboard on the SVGA the only cable that needs to be connected is the serial cable between the K3 and the P3. How do you have the transmit mode set up? Does it transmit immediately (vox) or is it CR? 73, Paul -- View this message in context: http

Re: [Elecraft] P3 SVGA; chars randomly omitted during Tx

Richard, Messages stored and recalled are sent automatically, regardless of the type of mode (i.e. vox, CR or ^T). It might make sense to have the message respect the sending mode, let me add it to the bug list. 73, Paul -- View this message in context: http://elecraft.365791.n2

Re: [Elecraft] 2 questions, how to use P3

and pileups. Of course I would suggest picking up an SVGA card 73, Paul -- View this message in context: http://elecraft.365791.n2.nabble.com/2-questions-how-to-use-P3-tp7572239p7572245.html Sent from the Elecraft mailing list archive at Nabble.com

Re: [Elecraft] P3-SVGA WfallMkrs missing?

Hi Sam, This is normal operation. The SVGA display does not implement the waterfall markers. 73, Paul -- View this message in context: http://elecraft.365791.n2.nabble.com/P3-SVGA-WfallMkrs-missing-tp7572174p7572191.html Sent from the Elecraft mailing list archive at Nabble.com

Re: [Elecraft] Need clarity on digital outputs

. That part is fuzzy. 73, Paul -- For those who risk, life has a flavor the protected shall ne'er enjoy. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post

[Elecraft] NCDXF/IARU Beacons, FAROS pgm K3

interface. Anyone else using FAROS with their K3 that could help me find where I am going wrong getting them to communicate. Tnx  Paul kc2nyu __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http

Re: [Elecraft] XG3 CW Buffer

, Paul -- View this message in context: http://elecraft.365791.n2.nabble.com/XG3-CW-Buffer-tp7571620p7571635.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net

[Elecraft] Is ham radio a sport ??

The link is to a 1958 Sports Illustrated article, about Ham Radio being a sport. If you have seen it before, sorry for the bandwidth, but I found it interesting reading, maybe some others will also... http://sportsillustrated.cnn.com/vault/article/magazine/MAG1002473/index.htm -- Paul

Re: [Elecraft] Trouble with Auto-Spot (K3)

Phil - I tried your suggestion of using VFO fine tuning and that does seem to help. I do not see the signal being driven off as I had previously. Will keep experimenting with. Thanks for the suggestion, 73 Paul kc2nyu Phil Hystad Wed, 13 Mar 2013 07:23:02 -0700 Mike, I have version 4.60

[Elecraft] Trouble with Auto-Spot (K3)

it used to bring it to the center and zero beat it. I am using filter settings between 200-400. I have THR set at 2. Any ideas on what I can do to correct this? 73 Paul kc2nyu __ Elecraft mailing list Home: http://mailman.qth.net/mailman

[Elecraft] K3 Speaker Amp Protection

mod webpage. Will it be available within the next few months? 73, Paul W8TM __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net

[Elecraft] P3 Question ?

to right, with the waterfall trace trailing from right to left of course and then within a couple of minutes (guessing at the time) exits off the screen, not to be seen again. Is this normal, anybody else seeing this?? Noticed it on 17 and 20 meters, have not checked the other bands yet... -- Paul

[Elecraft] Signal comparison k3 vs p3

Just listening to 9a2na on 15 metersS-9 on the K3 S meter and about S5-S6 on the P3 and also on the larger monitor, SVGA...How do I get them to match each other?, or at least be somewhat similar strength.? NF8J Paul VanOveren 5911 Snow Av Alto, Mi 49302 (616) 868-7149

<    5   6   7   8   9   10   11   12   13   14   >