Re: [Emc-users] LinuxCNC meetup 2016 Stuttgart, Germany

Hi Rene. Where is the final location for the Meeting in Stuttgart? Still in the same place of the previous meetings? Regards Alex Chiosso On Wed, Nov 2, 2016 at 6:50 PM, Rene Hopf wrote: > Es wird wieder ein LinuxCNC Treffen in Stuttgart geben. > > Die termine gelten jeweils für

Re: [Emc-users] Setting axis as homed

Hi Eric . You should just setup a machine with 2 axis (X-Y) or the number of real axis you need for the application as Ralph suggested. Regards Alex On Mon, Aug 8, 2016 at 4:46 PM, Ralph Stirling < ralph.stirl...@wallawalla.edu> wrote: > You can define any combination of axes in the ini file > t

Re: [Emc-users] Setting axis as homed

Hi Eric. Why are you using an axis (Z) to drive a pneumatic cylinder ? You should drive it as a discrete output using a custom M1xx function and setup a 2 axis machine instead of a 3 axis machine. Can you explain better your application please ? Regards Alex On Mon, Aug 8, 2016 at 2:51 PM, Eric

Re: [Emc-users] Loading SSD

size before to start the cloning procedure. Clonezilla is a good cloning tool and it's free. ;-) Regards Alex Chiosso On Mon, May 2, 2016 at 2:12 PM, John Thornton wrote: > I use clonezilla to clone drives. The only caveat is either both drives > have to be the same size or you have

[Emc-users] R: Clone a HD

Try to use Clonezilla. ;-) - Messaggio originale - Da: "John Thornton" Inviato: ‎20/‎02/‎2016 12:38 A: "EMC Mailing List" Oggetto: [Emc-users] Clone a HD I see two ways to clone a HD on the web one using dd and one using tar. Boot from the live cd. Mount your destination media to (say)

Re: [Emc-users] How to find old Bosch drive manuals?

Marius if you will get the wiring schematic this will be sure a big help to understand how to approach the retrofit in the right way. The cabinet is in any case in a good shape and very well integrated from the original manufacturer. Check out as much as possible what there are as "options" on the

Re: [Emc-users] How to find old Bosch drive manuals?

et us know your progress on this project. ;-) Regards On Sat, Jan 23, 2016 at 5:31 PM, Marius Alksnys wrote: > > > 01/23/2016 10:43 AM, alex chiosso rašė: > > Hi Marius. > > Do you have a picture of the drive and the whole electrical cabinet ? > > The drive should be a B

Re: [Emc-users] How to find old Bosch drive manuals?

Hi Marius. Do you have a picture of the drive and the whole electrical cabinet ? The drive should be a Bosch Servodyn but as you noticed it's quite difficult to find out any docs. This mainly because the SPM coding for Bosch (Rexroth-Indramat) means a generic usage for Spindle application. Do you h

Re: [Emc-users] VFD Tweaking

Hi Andy. Did you fit the proper values for the paramters Group 1 and 2 ? This VFD seem to have no selftuning procedure isn't it ? In any case I do believe that the VFD is maybe too small for the motor you're running (old type). Have you tried to measure the motor current value drived without the VF

Re: [Emc-users] Rookie question - what to get to run LinCNC easily/inexpensively

Hi Claude. Did you tried to use a PS2 mouse and keyboard so you can disable the usb ports and see if the latency spikes are still there ? Regards Alex On Tue, Oct 13, 2015 at 8:05 AM, Karlsson & Wang < nicklas.karls...@karlssonwang.se> wrote: > > ... > > Have you guys found anything in particul

[Emc-users] R: R: A lot of input/output. Cheap

If you would like a 'personal" usage machine you can try what ever Solution should work. But if you are searching For a reliable industrial grade Solution you have to spend some Money. This is my experience on that specific argument. Sometimes cheap is not good. ;-) - Messaggio originale --

[Emc-users] R: A lot of input/output. Cheap

Hi Sven. It is a small machine but in any case I suggest to you to use a plc in stead on LCNC. I mean it is possibile to do it even with LCNC but will be much difficult. I did many injection molding machine retrofit (the electric and Electronic and software part) and a plc+hmi is the much confor

Re: [Emc-users] A lot of input/output. Cheap

Hi Sven. Can you send a picture of the machine you have to retrofit ? Is it an injection moulding machine ? If yes how many tons is the closing clamp force and how many heating zones have the injection barrel/chamber ? Regards. Alex On Tue, Sep 15, 2015 at 11:41 PM, John Thornton wrote: > The

Re: [Emc-users] minimum spindle speed

Hi Tom. Have you tried to configure the VFD in Sensorless Vector Mode ? Please can you detail the brand and code manufacturer of your VFD ? Alex On Tue, Jun 23, 2015 at 9:44 AM, Karlsson & Wang < nicklas.karls...@karlssonwang.se> wrote: > If spindle motor is an asynchronous motor and simple volt

Re: [Emc-users] Expanding HTML Docs

Well done | Thanks so much John. Regards Alex On Tue, May 19, 2015 at 3:29 PM, Rick Lair wrote: > Dam Nice Work John, > > I favor the second one. > > Rick > > On 5/19/2015 8:19 AM, John Thornton wrote: > > I've added a second option that I like better than the first. Any > > comments are welco

Re: [Emc-users] How to delay spindle-at-speed

Hi Andy , thank you for the reply. It's not the matter of change the discussion object . But when somebody as expert as you are is writing an important concept I would like to understand it properly. Sorry ... On Fri, May 15, 2015 at 10:57 AM, andy pugh wrote: > On 15 May 2015 at 07:

Re: [Emc-users] How to delay spindle-at-speed

Hi to all. Andy , please , can you be more precise on this definition : > It reads that way, but that isn't how it runs. Every component reads > its inputs and updates its outputs exactly in the order they are > "addf"-ed to a thread, and they do that every time the thread runs. And when an wher

Re: [Emc-users] problem setting appropriate speeds in joint and world mode for 6 axis robot with genserkins

Well done Christian ! ;-) Alex On Mon, May 4, 2015 at 6:00 PM, Christian Stöveken < christian.stoeve...@gmail.com> wrote: > On Mon, May 4, 2015 at 3:38 PM, Andrew wrote: > > > 2015-05-04 13:40 GMT+03:00 Christian Stöveken < > > christian.stoeve...@gmail.com > > >: > > > > > Which one of the joi

Re: [Emc-users] Modbus RS-485 Connection with Mesa?

I do believe that you can use LCNC with a usb to RS485 converter and the Modbus protocol by ClassicLadder softplc built into LCNC or the mb2hal component. Alex Il giorno 01/apr/2015 23:04, "Mark Johnsen" ha scritto: > Alex, > > Yes, the application is industrial grade, but it is quite simple (2

Re: [Emc-users] Modbus RS-485 Connection with Mesa?

Hi Mark . Be careful with this kind of adapters because they are not optocoupled . If your application is an industrial grade I will spend some more money and buy something like the Advantech converter/adapter you linked above. Do you really need to have two separate Modbus network ? Alex On Wed,

Re: [Emc-users] New Debian install does not include Gedit

If someone is able to add the nc code highlighting many people will really appreciate it.;-) On Wed, Apr 1, 2015 at 5:51 PM, Kyle Kerr wrote: > I noticed a couple of mentions that geany doesn't have nc highlighting. > Adding it shouldn't be much of an issue. Heck, someone may already have the >

Re: [Emc-users] New Debian install does not include Gedit

Hi Belli. I've installed the Debian Wheezy LCNC and I was surprised that Gedit wasn't installed by default. As an alternative editor I've installed Geany that is much better than Gedit (this is my opinion ;-) ). The only one disadvantege I've found is that Geany doesn't hav

Re: [Emc-users] Velocity closed loop + Position losed loop on an axis

Looks really good. I've understood that you're running the axis with position open loop control. Am I wrong? Il giorno 25/mar/2015 20:52, "Leonardo Marsaglia" < leonardomarsagli...@gmail.com> ha scritto: > 2015-03-25 16:46 GMT-03:00 alex chiosso : > > > How

Re: [Emc-users] Velocity closed loop + Position losed loop on an axis

How are you managing the positioning right now? Are you using limit switches or incremental encoder or something else? Il giorno 25/mar/2015 19:45, "Leonardo Marsaglia" < leonardomarsagli...@gmail.com> ha scritto: > 2015-03-25 15:07 GMT-03:00 alex chiosso : > > > Hi

Re: [Emc-users] Velocity closed loop + Position losed loop on an axis

Hi Leonardo. If you want to perform a closed loop position system as you said you need the inner speed closed loop. I do believe that can be quite difficult to perform both closed loops within LCNC with the expected accuracy. The VFD that you are using is a sensor less vector control type (that is

Re: [Emc-users] Simple, adjustable timer

> > 2015-03-23 12:51 GMT+02:00 alex chiosso : > > Hi Viesturs. > > > > Finally I can send to you the HAL component for the "blink" function as I > > explained before. > > This is my first component I wrote so for sure somebody else can do &

Re: [Emc-users] Simple, adjustable timer

Hi Viesturs. Finally I can send to you the HAL component for the "blink" function as I explained before. This is my first component I wrote so for sure somebody else can do it better than I did . Anyway let me know if this component is useful for your needs (for me it is) . ;-) . You have to

Re: [Emc-users] Simple, adjustable timer

Hi Viesturs. I will provide it for you as soon as possible. Alex Il giorno 21/mar/2015 17:05, "Viesturs Lācis" ha scritto: > 2015-03-21 17:58 GMT+02:00 alex chiosso : > > Hi Viesturs. > > I made a custom HAL component that I called "blink" that I used for &

Re: [Emc-users] Simple, adjustable timer

Hi Viesturs. I made a custom HAL component that I called "blink" that I used for adjustable "on" and "off" period for lamp blinking but can be used to create adjustable duty cycle . It's quite simple but effective and for sure you can do it better. If you are interested I can give it but only next

Re: [Emc-users] new prerelease: 2.7.0~pre3

Thank you so much for all the efforts, time and passion filled into this project. Alex :-) Il giorno 20/feb/2015 05:31, "Sebastian Kuzminsky" ha scritto: > We just reached a milestone in the ongoing work to stabilize the 2.7 > branch in preparation for the upcoming 2.7.0 release. I present to y

Re: [Emc-users] Servo Drive Help?

Hi Todd. I'm italian but I don't know anything about this drive. The manufacturer company is small and the product seem to be a sort of custom made (maybe for the stop manufacturer) . The documentation pdf that you posted is not sufficient to understand how to connect properly the drive. The rs-485

Re: [Emc-users] Wheezy and Nvidia

I John. I've got same problem as you with an asus graphic card (nviadia gpu) and Debian wheezy. No way to install the nvidia drivers properly. At the end of a long story I re-install the LinuxCNC Wheezy distribution and leave the video drivers it automatically detect and it is fine (resolution 1280

Re: [Emc-users] Emc-users: hybrid iso csum

Hi Tom. No problem. I didn't want to blame you. You don't have to limit yourself. ;-) Alex On Sun, Jan 11, 2015 at 3:36 PM, TJoseph Powderly wrote: > On 01/11/2015 03:27 AM, alex chiosso wrote: > > Hi TJoseph. > > I'm am Italian . > > When you say : >

Re: [Emc-users] Emc-users: hybrid iso csum

Hi Peter. This is not a "religious discussion" . For me it's a matter of "netiquette" and as you say "porco mondo" it's not nice as well. But because everybody can express themselves as they want . no problem. :-) Peace. Alex On Sun, Jan 11, 2015 at 12:18 PM, Peter Blodow wrote: > Tom, in

Re: [Emc-users] Emc-users: hybrid iso csum

Hi TJoseph. I'm am Italian . When you say : > on the morning of 10jan the main website was in Italian > porco dio! > It is not a nice expression. Especially "porco dio!" it's a blasphemy for a catholic person but the meaning it's universally related to god. Also for the netiquette it's not correct

Re: [Emc-users] What was the name of that board?

System On Chip , it should be . Alex Il giorno 09/gen/2015 21:02, "Lars Andersson" ha scritto: > @Alexander, what is meant by SoC? Google failed me there. > > > On 2015-01-09 20:00, Alexander Rössler wrote: > > On Friday 09 January 2015 05:58:14 Sven Wesley wrote: > >> 2015-01-08 23:47 GMT+01:00

Re: [Emc-users] Merry Christmas

Merry Christmas and a Happy New Year to all of the great LinuxCNC community people. Greetings from Italy. Alex Il giorno 24/dic/2014 17:37, "Pete Matos" ha scritto: -- Dive into the World of Parallel Programming! The Go P

Re: [Emc-users] Mb2hal?

Hi Todd. Here <https://code.google.com/p/modbus-tk/> is the link to modbus-tk python module . ;-) Alex On Sat, Dec 20, 2014 at 9:26 AM, alex chiosso wrote: > Hi Todd. > As someone else suggested in another thread you can give a try at a python > module called modbustk (modbus to

Re: [Emc-users] Mb2hal?

Hi Todd. As someone else suggested in another thread you can give a try at a python module called modbustk (modbus toolkit) . I've tested it on TCP/IP and is a powerful,complete and documented python module. The serial line is supported as well. Alex Il giorno 20/dic/2014 03:26, "Todd Zuercher" h

Re: [Emc-users] Modbus

Hi. I suggest to you to try the *mb2hal* component to do this job . I've tested it on TCP/IP and it works just fine. It is not so well documented as it should be (I mean some clear examples should give an opportunity of a wide usage of this well packed component. *THANKS to Viktor Rocco the Author

Re: [Emc-users] G edit and velocity

Hi Chris. For me Gedit is good but honestly Geany is better. Because I'm using Debian Wheezy and Gedit is not installed as default, I've installed Geany that is for me better. Il giorno 17/dic/2014 18:29, "Chris Morley" ha scritto: > > I have used gedit for about 6 years for all my programming...

Re: [Emc-users] G edit and velocity

ednesday 17 December 2014 10:37:04 alex chiosso did opine > And Gene did reply: > > Hi Gene. > > I'm using "Geany" too . ;-) > > Do you know (or anybody know) if there is a way to highlight the G Code > > sintax ? > > > > Alex > > Apparently not

Re: [Emc-users] G edit and velocity

Hi Gene. I'm using "Geany" too . ;-) Do you know (or anybody know) if there is a way to highlight the G Code sintax ? Alex On Wed, Dec 17, 2014 at 4:29 PM, Gene Heskett wrote: > > On Saturday 13 December 2014 07:53:51 John Thornton did opine > And Gene did reply: > > You have to specify the edit

Re: [Emc-users] G edit and velocity

Hi Wallace . I got the same problem when I made a new installation using the Debian Wheezy package. As John told you , you should specify the editor program you want to use into the INI file. Keep in mind that Debian comes with an editor called Mousepad . So if you want Gedit working you should dow

Re: [Emc-users] sevomotor -encoder

Hi. You said : > this encoder signals go into lenze motor drive sd 94 but , as I told you , SD94 is not Lenze (is Servo Dinamics) . So If you have a Lenze can you detail the model/product code so people that want to help can search for information to support you. Alex On Fri, Dec 12, 2014 at

Re: [Emc-users] sevomotor -encoder

Hi Aram. SD94 seems to be the product code for Servo Dinamics Servo Drive as this . Why are you talking about Lenze ? Alex On Fri, Dec 12, 2014 at 1:09 PM, Todd Zuercher wrote:

Re: [Emc-users] 7i76 spindle output

why it works one way perfectly and the other > way is way off. Like you said I guess it's the negative. > > Once I get this figured out I want to tackle the MODBUS setup for mine too. > Just figured this would be easier for now. > > On Sun, Dec 7, 2014 at 5:22 AM, alex chiosso

Re: [Emc-users] 7i76 spindle output

Hi Jeremy. Does your VFD have a CW-CCW physical input to reverse the motor rotation ? If yes you should wire it and activate it related to the sign of motion.spindle-speed-out . Or if your VFD has a differential (+/-10Vdc) input you should use the motion.spindle-speed-out (scaled as needed) to acti

Re: [Emc-users] Not able to use comp (command not found) .

Thank you Chris and Sebastian. :-) Alex On Thu, Dec 4, 2014 at 6:37 PM, Sebastian Kuzminsky wrote: > On 12/4/14 10:24 AM, alex chiosso wrote: > > Thanks Phillip. > > You got the right answer . > > I was using the online documentation > > <http://linuxcnc.org/docs

Re: [Emc-users] Not able to use comp (command not found) .

hanks again. Alex On Thu, Dec 4, 2014 at 6:05 PM, Philipp Burch wrote: > Hi Alex! > > On 04.12.2014 17:43, alex chiosso wrote: > > Hi to all. > > I'm running LCNC on a pc with the Debian Wheezy installation package . > > I'm getting the updates from Mas

Re: [Emc-users] Multiple glade sub-panels

Hi Marius. Is the hal pins naming your problem ? If it is maybe it is a no_problem . I mean because you can freely name the hal widgets that creates hal pins you can name i.e gladevcp.01_hal_pin_name for the "panel 1" , gladevcp.02_hal_pin_name for the "panel 2" and so on. I would use the Notebook

Re: [Emc-users] MTBF

You're right Rick . ;-) On Wed, Dec 3, 2014 at 1:27 PM, Rick Lair wrote: > It looks like " over 1500 'millions of hours' of 'Mean Time Between > Failures' " > > > Thanks > > > Rick > > > > -- Original Message -- > From: "andy pugh" > To: "Enhanced Machine Controller (EMC)" > > Sent: 12

Re: [Emc-users] Where can I find the docs on the math functions in LCNC? Wiki doesn't show them

Hi Gene. Look at Here . Regards Alex On Tue, Dec 2, 2014 at 3:45 PM, Gene Heskett wrote: > See subject > > Thanks. > > Cheers, Gene Heskett > -- > "There are four boxes to be used in defense of liberty: > soap, ballot, jury,

Re: [Emc-users] gcmc - 1.5.2

n I used the term "jumps" because you already use an instruction called "goto" . So to be not ambiguous I used a different term to express myself. Alex On Mon, Dec 1, 2014 at 6:11 PM, Bertho Stultiens wrote: > On 12/01/2014 09:08 AM, alex chiosso wrote: > > I&#

Re: [Emc-users] gcmc - 1.5.2

Hi Bertho. I'm following you since the beginning on this list and I've to say that your work is really nice and professionally made . I usually don't use cnc's for machining parts but to do material handling or such so I need to make "jumps" within the G code (conditional or unconditional) but the

Re: [Emc-users] VFD trouble

ontrol the current better, remember > to > set both base frequency and max frequency. > > > -Original Message- > From: alex chiosso [mailto:achio...@gmail.com] > Sent: 26 November 2014 17:40 > To: Enhanced Machine Controller (EMC) > Subject: Re: [Emc-users] VFD troub

Re: [Emc-users] VFD trouble

This VFD has also a Auto tune function , did you tried it ? Alex On Wed, Nov 26, 2014 at 4:34 PM, alex chiosso wrote: > Hi Viesturs. > How did you connect the motor phases (on the motor terminal blocks) star > or triangle ? > The motor seems to be a 2 poles (12000rpm at 200Hz) a

Re: [Emc-users] VFD trouble

Hi Viesturs. How did you connect the motor phases (on the motor terminal blocks) star or triangle ? The motor seems to be a 2 poles (12000rpm at 200Hz) and the phase voltage is 220VAC so you should connect the motor phases to "star" type isn't it ? Are you driving the speed reference with an analog

Re: [Emc-users] VFD trouble

Hi Viesturs . Could you please specify the motor data and the VFD data (manufacturers + material code) ? I never seen any VFD to control 2 motors in "series" connection . The high speed motors are equivalent to asincronous or they are not ? A standard VFD (V/F or sensor less vector) can control thi

Re: [Emc-users] Something of Interest

Hi Rick. It looks good as field I/O using the Modbus Protcol (with Classic Ladder I/O scanning or mb2hal component as well) . The price is pretty good for the US market and it is industrial grade hardware fully certified. Alex On Wed, Nov 19, 2014 at 3:13 PM, Rick Lair wrote: > Not sure if this

Re: [Emc-users] upgrade to current version causes lockup

Ok. Thank you . Il giorno 18/nov/2014 17:42, "Viesturs Lācis" ha scritto: > 2014-11-18 18:42 GMT+02:00 alex chiosso : > > As I understood the isolcpus=1 (for a dual core processor) is > "mandatory" . > > No, it is not. It can help improve realtime performanc

Re: [Emc-users] upgrade to current version causes lockup

mment . :-) Alex On Tue, Nov 18, 2014 at 6:21 PM, Sebastian Kuzminsky wrote: > On 11/18/14 10:19 AM, alex chiosso wrote: > > Is the base thread period adjustable for the latency test gui ? > > If yes , can you please tell me how can I do this ? > > You don't need t

Re: [Emc-users] Screw Mapping

You're are welcome Mark. What is on the net seems that never die ! Alex On Tue, Nov 18, 2014 at 6:19 PM, Mark Wendt wrote: > On Tue, Nov 18, 2014 at 12:14 PM, alex chiosso wrote: > > > Hi Mark. > > Why don't you update the YouTube video ? > > I usually t

Re: [Emc-users] upgrade to current version causes lockup

Hi Sebastian . Is the base thread period adjustable for the latency test gui ? If yes , can you please tell me how can I do this ? Alex On Tue, Nov 18, 2014 at 6:08 PM, Sebastian Kuzminsky wrote: > On 11/18/14 10:02 AM, kqt4a...@gmail.com wrote: > > I originally allowed the Radeon driver to loa

Re: [Emc-users] Screw Mapping

< > dave.thearchiv...@gmail.com > > wrote: > > > and Now I see where the feelers can be placed > > > > Dave > > > > On 18/11/2014, Mark Wendt wrote: > > > On Tue, Nov 18, 2014 at 11:46 AM, alex chiosso > > wrote: > > > > > >&g

Re: [Emc-users] Screw Mapping

Hi Mark is this your machine ? Nice application ! Alex On Tue, Nov 18, 2014 at 5:43 PM, Mark Wendt wrote: > On Tue, Nov 18, 2014 at 11:36 AM, Stuart Stevenson > wrote: > > > Would it be possible to machine the top of the table (with a large enough >

Re: [Emc-users] upgrade to current version causes lockup

utomagically. I do believe that 1GB RAM maybe is the lower limit to get the new installation working properly. I'm not an expert so sorry if I'm not so effective on helping you. ;-) Alex On Tue, Nov 18, 2014 at 5:16 PM, wrote: > On Tue, 18 Nov 2014, alex chiosso wrote: > >

Re: [Emc-users] upgrade to current version causes lockup

What about RAM ? (How many GB do you have?) I do believe that with the new installation you are no more running with the vesa driver . Can you double check this ? Did you already make the isolcpus=1 modification ? I hope it is not a kernel issue due to the old hardware . Alex On Tue, Nov 18, 2014

Re: [Emc-users] Hal mux

> > classicladdr_rt runs in the servo thread like any other realtime module. This is an important information. That means that the CL logic is processed every servo period isn't it ? This point is missing into the documentation (as I know) . Alex On Mon, Nov 17, 2014 at 6:16 PM, andy pugh wro

Re: [Emc-users] 2.6.4

Hi Aram. Look at this video from YouTube . It's well done and clear so you should understand the installation process of the LCNC new version. The same author made other interesting videos on the same argument (upgrading to the latest version, latency te

Re: [Emc-users] Unable to get Nvidia Graphic Card working with nvidia drivers .

. Anyway this is not the best but should be ok. Thans a lot for the help and support you gave me. :-) Alex On Fri, Nov 7, 2014 at 10:13 PM, alex chiosso wrote: > Thank you Kirk for your detailed explanation I will try your tips. > My cpu is an Intel dual core so isolcpu=1 should be the rig

Re: [Emc-users] A beginners question about E-Stop and Charge Pumps

Only the outputs power supply should be cut off from the Estop circuit and in some cases only the outputs that activate the main power and circuit enable the axis and spindle drives and the devices that have to be stopped in case of Emergency stop . The inputs power supply is usually not under the

Re: [Emc-users] A beginners question about E-Stop and Charge Pumps

Dave you are 100% right. Your detailed explanation it`s correct conceptually and practically for an industrial application. Alex Il giorno 08/nov/2014 17:03, "Joe Hildreth" ha scritto: > Bruce, > > Yeah, I suppose I have been beating the horse to death with the questions. > Sorry. But hey, when

Re: [Emc-users] Unable to get Nvidia Graphic Card working with nvidia drivers .

Thank you Kirk for your detailed explanation I will try your tips. My cpu is an Intel dual core so isolcpu=1 should be the right one . Alex Il giorno 07/nov/2014 20:12, "John Alexander Stewart" ha scritto: > Alex; > > I've made the isolcpu=1 modification but numbers are always pretty high > > (6

Re: [Emc-users] Unable to get Nvidia Graphic Card working with nvidia drivers .

fic kernel layout and it doesn't work with the RTAI kernel, but I > can't be sure > > On Fri, Nov 7, 2014 at 12:32 PM, alex chiosso wrote: > > > Hi Eric . > > Did you get good latency numbers with Vesa drivers. > > My need is to get the best latency number

Re: [Emc-users] Unable to get Nvidia Graphic Card working with nvidia drivers .

maybe I was wrong . Alex On Fri, Nov 7, 2014 at 6:10 PM, Eric Keller wrote: > Last time I set up a lcnc system I had a lot of trouble with the Nvidia > drivers -- they wouldn't install. I did go with Vesa. I don't really > think it's a problem. > > On Fri, No

Re: [Emc-users] Unable to get Nvidia Graphic Card working with nvidia drivers .

nc.org/cgi-bin/wiki.pl?TroubleShooting#NVidia_and_ATI_graphics_cards > try those solutions and any other graphics card you have lying around > > Dave Caroline > > On 07/11/2014, alex chiosso wrote: > > Hi to all. > > I've built a new desktop pc (honestly I bought the h

[Emc-users] Unable to get Nvidia Graphic Card working with nvidia drivers .

Hi to all. I've built a new desktop pc (honestly I bought the hw components a couple of years ago) to use it for LCNC application hoping to get a good latency numbers . The mother board is an ASUS P5KPL SE ; The Graphic Card is an ASUS EN8400GS 512MB based on the GeForce 8400GS chip ; The Processor

Re: [Emc-users] LinuxCNC Meeting Stuttgart, Germany 2014

> > > If you still need a place to crash or any help ring me up > > 0176 975 99 253 > > > > > > > > On Thu, Oct 23, 2014 at 1:42 PM, Rene Hopf wrote: > > > > > I do not know if there is anything happening on Friday. If not I will > > > spend the evenin

Re: [Emc-users] LinuxCNC Meeting Stuttgart, Germany 2014

sale? If they are, I might need a bigger car… > My driver is making good progress: > https://www.dropbox.com/s/m0s75igxbtm3qw8/2014-10-23%2012.27.22.jpg?dl=0 > > Rene > > > > On 02 Oct 2014, at 15:04, alex chiosso wrote: > > > > Hi Christian . > > So

Re: [Emc-users] Toolchanging (was Mach3 to LinuxCNC)

One way should be run multiple instances of LCNC (Xenomai rt patch I heard about). On commercial CNC is possible have multiple CNC channels that can share informations between them. Il giorno 22/ott/2014 19:59, "Dave Cole" ha scritto: > On 10/22/2014 2:33 PM, andy pugh wrote: > > On 22 October 20

Re: [Emc-users] F0

Hi Aram. I was not exactly right before. You have to use M67 Synchronized Analog Output that will allow you to activate up to 16 analog output values (default AO number is 4 from 0 to 3 ) . The Hal pins related to M67 are floating point type and their names are: motion.analog-out-00 motion.analog-

Re: [Emc-users] Multiple instances of classicladder

Hi Marius. CL can run only one instance. Il giorno 18/ott/2014 21:43, "Marius Alksnys" ha scritto: > Is it possible to run multiple instances of classicladder? I want to run > several identical production lines from one control system using cl. > The idea is to design one cl for one line and load

Re: [Emc-users] F0

Why do not use a custom M function syncronized to do that ? M1xx G1 X100 Y240 F100 Into the M1xx you can fit the Hal code to perform what you need. Il giorno 17/ott/2014 21:30, "a k" ha scritto: > About: > I was wondering if motion.motion-type would work but that > distinguishes between lines and

Re: [Emc-users] F0

Hi Sebastian. I was looking at the Integrator Manual at the section that describes the motion Hal component. Il giorno 17/ott/2014 20:49, "Sebastian Kuzminsky" ha scritto: > On 10/17/2014 08:44 AM, alex chiosso wrote: > > Just a note . > > The debugging pins aren't

Re: [Emc-users] F0

Just a note . The debugging pins aren't listed into the PDF doc (as I can see) . I was watching that documentation . Thanks again. Alex On Fri, Oct 17, 2014 at 4:40 PM, alex chiosso wrote: > Thank you . > I am blind . :-) > > Alex > > On Fri, Oct 17, 2014 at 4:35 PM, an

Re: [Emc-users] F0

Thank you . I am blind . :-) Alex On Fri, Oct 17, 2014 at 4:35 PM, andy pugh wrote: > On 17 October 2014 15:14, alex chiosso wrote: > > > Is "motion.motion-type" listed and described into the documentation ? > > I didn't see any reference to this pin > >

Re: [Emc-users] F0

Hi Andy. Is "motion.motion-type" listed and described into the documentation ? I didn't see any reference to this pin . Am I wrong ? Regards Alex On Fri, Oct 17, 2014 at 1:32 PM, andy pugh wrote: > On 17 October 2014 11:35, Marius Alksnys wrote: > > Maybe motion.current-vel and comp hal compo

Re: [Emc-users] Conditional code- GOTO

Hi to all. Wondering why the GOTO feature is a bad thing to have I was reading a USA brand CNC manufacturer (Delta Tau PMAC-NC Pro2 ) and they use GOTO as a standard function for the NC program control into parametric programming FANUC style

Re: [Emc-users] Siemens simodrive 611

David this <http://www.automation.siemens.com/doconweb/pdf/840c_1101_e/611a_iaa.pdf?p=1> is the user manual of Simodrive 611 analog. As I told you if you can get the Siemens product code you will find all the docs you need . :-) Alex On Thu, Oct 16, 2014 at 5:41 PM, alex chiosso wrote:

Re: [Emc-users] Siemens simodrive 611

Yes Dave you are right . The "D" should mean (digital) the technology used on the control boards . Alex On Thu, Oct 16, 2014 at 5:36 PM, Dave Cole wrote: > The 611D's were also available with analog (+/- 10V) inputs. (many > options) > > Dave > > > On 10/

Re: [Emc-users] Siemens simodrive 611

The 611 only is analog and the 611D are digital . Do you have the complete code for that servo drive ? I do believe that with the Siemens product code you should be able to find the PDF documentation on the net . I used this servo system in the past years and it's quite similar to other servo syste

Re: [Emc-users] Conditional code- GOTO

Hi , Gentlemen . Seems to be difficult to keep the level of the discussion without to be misunderstood. I'm not asking to anybody to do nothing on the fly . I'm not so stupid . I was wondering if this GOTO coding feature is first of all interesting to have and secondary how difficult is to implemen

Re: [Emc-users] Conditional code- GOTO

Hi Dave . Thank you so much for the help you are giving me . Your detailed clarifications are important for me. I really appreciate . Hi Gene. As always it's a pleasure for me to read your stories . So you never hurt me . ;-) Regards Alex On Sat, Oct 4, 2014 at 6:47 PM, Gene Heskett wrote: >

Re: [Emc-users] Conditional code- GOTO

al code implementation looks > questionable in value since there > are already conditional constructs in the existing Gcode that work fine. > > Dave > > > On 10/4/2014 7:04 AM, alex chiosso wrote: > > Hi to all. > > I'm the beginner of the original mail thread

Re: [Emc-users] Conditional code- GOTO

Hi to all. I'm the beginner of the original mail thread "Unconditional , Conditional Program Jumps " . Honestly the discussion is diverted from the initial point . I'm talking about G code programming nothing else. So what is conventional, best practises , dogma of whatever else in all of the other

Re: [Emc-users] Uncondiftional , Conditional Program Jumps .

Hi Erik . Nice terms usage (GOTO-phobia) . You explained the concept clearly and effectively . Alex On Fri, Oct 3, 2014 at 10:24 AM, Erik Christiansen wrote: > On 03.10.14 04:55, Chris Morley wrote: > > I tend to agree with you. bad use of goto is .. bad. > > good and sparse use of goto is fine

Re: [Emc-users] Uncondiftional , Conditional Program Jumps .

sums it up :-) > > Regards > > Cecil > > -Original Message- > From: Marcus Bowman [mailto:marcus.bow...@visible.eclipse.co.uk] > Sent: 02 October 2014 11:59 PM > To: Enhanced Machine Controller (EMC) > Subject: Re: [Emc-users] Uncondiftional , Conditional Program

Re: [Emc-users] Uncondiftional , Conditional Program Jumps .

Hi to all. First of all thank you for your opinions. I'm Italian but I'm not a "stupid BASIC spaghetti programmers". [ ;-) ] Especially in CNC programming where usually the program flow from "top to bottom" and stops at the end with M2 (with no infinite loop as a void main ) and you need to do

Re: [Emc-users] Uncondiftional , Conditional Program Jumps .

this is really useful and widely used . So I would like to know your opinion (dear Gentlemen) and understand if it is too difficult to implement at G code interpreter level . Regards Alex On Wed, Sep 24, 2014 at 4:01 PM, alex chiosso wrote: > Hi to all. > I'm testing som

  1   2   >