When running fink update-all fink attempts to make octave
The following 2 packages will be installed or updated:
octave octave382
The make procedure aborts with the following compilation errors:
/bin/sh ../../libtool --tag=F77 --mode=compile /sw/bin/gfortran-fsf-5 -O3
-ff2c -c -o
The new build works for me. Thank you very much for your help resolving this.
James
> On Feb 9, 2016, at 8:58 AM, Alexander Hansen
> wrote:
>
>
>> On Feb 9, 2016, at 06:33, James Howse wrote:
>>
>> Here is the output of the ls command
Here is the output of the ls command you suggested.
James
/opt/fink/src/fink.build/octave-atlas-qtmac-3.8.2-9/octave-3.8.2/doc/interpreter/octave.t2d:
total 0
drwxr-xr-x 5 fink-bld fink-bld 170 Feb 7 15:56 octave.t2d
> On Feb 9, 2016, at 06:33, James Howse wrote:
>
> Here is the output of the ls command you suggested.
> James
>
> /opt/fink/src/fink.build/octave-atlas-qtmac-3.8.2-9/octave-3.8.2/doc/interpreter/octave.t2d:
> total 0
> drwxr-xr-x 5 fink-bld fink-bld 170 Feb 7
> On Feb 7, 2016, at 13:10, James Howse wrote:
>
> /opt/fink/src/fink.build/octave-atlas-qtmac-3.8.2-9/octave-3.8.2/doc/interpreter/octave.t2d:
> total 0
> drwxr-xr-x 5 fink-bld fink-bld 170 Jan 18 15:33 octave.t2d
>
>
I am running an Intel Mac Pro with Mac OS Yosemite 10.10.5 and XCode 7.2.1.
The build of the package octave-atlas-qtmac 3.8.2-9 fails for me with the
following error messages. Any idea what is wrong?
Thanks,
James
Octave successfully built. Now choose from the following:
./run-octave
> On Feb 7, 2016, at 11:04, James Howse wrote:
>
> I am running an Intel Mac Pro with Mac OS Yosemite 10.10.5 and XCode 7.2.1.
> The build of the package octave-atlas-qtmac 3.8.2-9 fails for me with the
> following error messages. Any idea what is wrong?
> Thanks,
FYI: another little problem with octave. On doing a fink update-all I get
following error message:
(/sw/src/fink.build/octave-3.8.2-9/octave-3.8.2/doc/interpreter/fn-idx.texi
(Function Index) [889] [890])
(/sw/src/fink.build/octave-3.8.2-9/octave-3.8.2/doc/interpreter/op-idx.texi
(Operator
> On Nov 5, 2015, at 02:06, Jacques Bloch wrote:
>
> FYI: another little problem with octave. On doing a fink update-all I get
> following error message:
>
> (/sw/src/fink.build/octave-3.8.2-9/octave-3.8.2/doc/interpreter/fn-idx.texi
> (Function Index) [889] [890])
>
On 5 November 2015 at 04:44, Alexander Hansen
wrote:
> That being said, I just put out Octave-3.8.2-9, which uses both Debian
> patches and runs “autoreconf -fi” after patching but before running the
> configure script.
Install now works perfectly on both my Macs.
Dear All,
If can confirm the latest patch octave-3.8.2-9 builds.
Thanks very much to Alex, Richard et al.
Best wishes
James.
Alexander Hansen wrote:
On Nov 4, 2015, at 06:49, Alexander Hansen wrote:
On Nov 4, 2015, at 05:08, Richard Walker
> On Nov 4, 2015, at 05:08, Richard Walker wrote:
>
> Just noting a "me too" for the problem with Octave 3.8.2 as noted in the
> recent changes to octave-3.8.2.info, i.e.,
> "./octave.ops:60: Argument of \\ has an extra }.",
> on two separate Mac installations (home
> On Nov 4, 2015, at 06:49, Alexander Hansen
> wrote:
>
>
>> On Nov 4, 2015, at 05:08, Richard Walker wrote:
>>
>> Just noting a "me too" for the problem with Octave 3.8.2 as noted in the
>> recent changes to octave-3.8.2.info, i.e.,
>>
> On Oct 5, 2015, at 13:20, Martin Costabel wrote:
>
> On 5/10/15 21:53, Gary K. Olson wrote:
>> Alex Hansen’s fix over weekend fixed the system-perl problem, so I
>> decided to build a few active packages that I hadn’t built under 10.10.
>> Several packages couldn’t build
Alex Hansen’s fix over weekend fixed the system-perl problem, so I decided to
build a few active packages that I hadn’t built under 10.10. Several packages
couldn’t build because of broken c compiler. Here is message on attempting to
build octave-qtmac that was typical:
>
checking for style
On 5/10/15 21:53, Gary K. Olson wrote:
> Alex Hansen’s fix over weekend fixed the system-perl problem, so I
> decided to build a few active packages that I hadn’t built under 10.10.
> Several packages couldn’t build because of broken c compiler. Here is
> message on attempting to build
I refurbished an old MacBookPro with more memory and an ssd that is running
10.10.5. I installed a clean version of fink which I have updated to fink
0.39.0. I downloaded apples’ Java for OS X 2015-001, which is the current
legacy download from Apple, and installed it. However, fink does
> On Oct 3, 2015, at 13:29, Gary K. Olson wrote:
>
> I refurbished an old MacBookPro with more memory and an ssd that is running
> 10.10.5. I installed a clean version of fink which I have updated to fink
> 0.39.0. I downloaded apples’ Java for OS X 2015-001, which is
Hi,
I have recently updated to yosemite. While trying to get fink up from scratch,
I found out that I cannot install octave due to its dependency on legacy java.
I would like to refrain from installing java6 just to get octave. I searched
the fink-users archieves and found the following thread
Hi again,
Apologies for the previous email, I just saw that there was another thread from
just 4 days ago. I found my answer there. Please disregard my question.
Best,
e.
On 23 Nov 2014, at 11:45, Erkcan Özcan erkcan.oz...@boun.edu.tr wrote:
Hi,
I have recently updated to yosemite.
On 11/23/14, 1:45 AM, Erkcan Özcan wrote:
Hi,
I have recently updated to yosemite. While trying to get fink up from
scratch, I found out that I cannot install octave due to its dependency
on legacy java. I would like to refrain from installing java6 just to
get octave. I searched the
Okay, I narrowed down my problem as follows: I made sure I had the
latest JDK from Oracle (installed without a hitch) and then did
piecewise updates until the only ones left (according to update-all)
were various octave packages and system-java16-dev. None of the octave
stuff would build
On 27.10.2014, at 20:05, Alexander Hansen alexanderk.han...@gmail.com wrote:
On Oct 27, 2014, at 12:03 PM, Lukas Reichlin lukas.reichlin.li...@gmail.com
wrote:
ed:~ lukas$ fink update-all
Information about 11417 packages read in 1 seconds.
The following 9 packages will be installed or
On Oct 27, 2014, at 12:03 PM, Lukas Reichlin lukas.reichlin.li...@gmail.com
wrote:
ed:~ lukas$ fink update-all
Information about 11417 packages read in 1 seconds.
The following 9 packages will be installed or updated:
atk1 atk1-shlibs octave-ref octave382-ref octave382-ref-dev openmotif4
ed:~ lukas$ fink update-all
Information about 11417 packages read in 1 seconds.
The following 9 packages will be installed or updated:
atk1 atk1-shlibs octave-ref octave382-ref octave382-ref-dev openmotif4
openmotif4-shlibs plotutils-dev
plotutils-shlibs
The following 2 additional packages will
On Oct 27, 2014, at 12:18 PM, Lukas Reichlin lukas.reichlin.li...@gmail.com
wrote:
On 27.10.2014, at 20:05, Alexander Hansen alexanderk.han...@gmail.com wrote:
On Oct 27, 2014, at 12:03 PM, Lukas Reichlin
lukas.reichlin.li...@gmail.com wrote:
ed:~ lukas$ fink update-all
Information
Looking for incorrect headers in 1151 dependency files...
Determining fink providers of 239 headers...
1 - 100
101 - 200
201 - 239
Found use of headers from 13 fink packages:
fftw3
fltk13-aqua
fontconfig2-dev
freetype219
gl2ps-dev
On 10/25/14, 1:35 AM, Lukas Reichlin wrote:
On 25.10.2014, at 07:53, Alexander Hansen alexanderk.han...@gmail.com wrote:
On 10/24/14, 8:14 PM, Lukas Reichlin wrote:
snip
# manually install libcxx-fix.h
cp
On 25.10.2014, at 07:53, Alexander Hansen alexanderk.han...@gmail.com wrote:
On 10/24/14, 8:14 PM, Lukas Reichlin wrote:
snip
# manually install libcxx-fix.h
cp
/sw/src/fink.build/octave-ref-3.8.2-2/octave-3.8.2/liboctave/operators/libcxx-fix.h
On 25.10.2014, at 17:19, Alexander Hansen alexanderk.han...@gmail.com wrote:
On 10/25/14, 1:35 AM, Lukas Reichlin wrote:
On 25.10.2014, at 07:53, Alexander Hansen alexanderk.han...@gmail.com
wrote:
On 10/24/14, 8:14 PM, Lukas Reichlin wrote:
snip
# manually install libcxx-fix.h
On 10/25/14, 8:39 AM, Lukas Reichlin wrote:
On 25.10.2014, at 17:19, Alexander Hansen alexanderk.han...@gmail.com
wrote:
On 10/25/14, 1:35 AM, Lukas Reichlin wrote:
On 25.10.2014, at 07:53, Alexander Hansen alexanderk.han...@gmail.com
wrote:
On 10/24/14, 8:14 PM, Lukas Reichlin wrote:
On 10/24/14, 8:14 PM, Lukas Reichlin wrote:
snip
# manually install libcxx-fix.h
cp
/sw/src/fink.build/octave-ref-3.8.2-2/octave-3.8.2/liboctave/operators/libcxx-fix.h
/sw/src/fink.build/root-octave-ref-3.8.2-2/sw/include/octave-3.8.2/octave/
cp:
Dear octave maintainer,
octave-atlas-3.8.2-1 fails in configuration stage. All dependencies compile
successfully.
My system:
Package manager version: 0.38.1
Distribution version: selfupdate-cvs Thu Oct 23 17:32:35 2014, 10.10, x86_64
Trees: local/main stable/main stable/crypto
Xcode.app: 6.1
On 10/23/14, 8:25 AM, Petri Piila wrote:
Dear octave maintainer,
octave-atlas-3.8.2-1 fails in configuration stage. All dependencies compile
successfully.
My system:
Package manager version: 0.38.1
Distribution version: selfupdate-cvs Thu Oct 23 17:32:35 2014, 10.10, x86_64
Trees:
On Core2Duo OSX 10.6.8, I see the following glitches:
Can't resolve dependency liboctave343-gcc48-dev for package
io-oct343-1.2.2-1 (no matching packages/versions found)
and
Failed: Illegal version specification '= 4.0.2-2) (-atlas = -atlas)
atlas-shlibs (= 3.10.1-1' for package
On 5/28/13 7:33 AM, Dominique Dhumieres wrote:
On Core2Duo OSX 10.6.8, I see the following glitches:
Can't resolve dependency liboctave343-gcc48-dev for package
io-oct343-1.2.2-1 (no matching packages/versions found)
Oops. Over-synced that from 10.7/ . Fixed now.
and
Failed: Illegal
Updating bundle-octave360-atlas fails with:
Can't resolve dependency octave360-docs for package
bundle-octave360-atlas-20130219-2 (no matching packages/versions found)
Exiting with failure.
Updating bundle-octave-atlas (3.6.4) fails with
Can't resolve dependency actuarial-oct364 for package
On 2/24/13 6:56 AM, Dominique Dhumieres wrote:
Updating bundle-octave360-atlas fails with:
Can't resolve dependency octave360-docs for package
bundle-octave360-atlas-20130219-2 (no matching packages/versions found)
Exiting with failure.
Updating bundle-octave-atlas (3.6.4) fails with
On 2/23/13 9:15 AM, Alexander Hansen wrote:
On 2/23/13 8:54 AM, Alexander Hansen wrote:
On 2/23/13 6:52 AM, Hans-Juergen Greif wrote:
Hello,
I have found a bug on octave 3.6.3(2) on macbook retina:
A(1:512,1:512)=0;
A(256-10:256+10,256-10:256+10)= 255;
imagesc(A)
or
image(A)
Hello,
I have found a bug on octave 3.6.3(2) on macbook retina:
A(1:512,1:512)=0;
A(256-10:256+10,256-10:256+10)= 255;
imagesc(A)
or
image(A)
results in a completely white figure.
On opensuse 12.2 octave-3.6.2 on a lenovo T61p notebook result is correct.
Cheers
Hans-Juergen
--
View
On 2/23/13 6:52 AM, Hans-Juergen Greif wrote:
Hello,
I have found a bug on octave 3.6.3(2) on macbook retina:
A(1:512,1:512)=0;
A(256-10:256+10,256-10:256+10)= 255;
imagesc(A)
or
image(A)
results in a completely white figure.
On opensuse 12.2 octave-3.6.2 on a lenovo T61p
On 2/23/13 8:54 AM, Alexander Hansen wrote:
On 2/23/13 6:52 AM, Hans-Juergen Greif wrote:
Hello,
I have found a bug on octave 3.6.3(2) on macbook retina:
A(1:512,1:512)=0;
A(256-10:256+10,256-10:256+10)= 255;
imagesc(A)
or
image(A)
results in a completely white figure.
On opensuse
On Sun, Sep 9, 2012 at 10:46 PM, Alexander Hansen
alexanderk.han...@gmail.com wrote:
On 9/9/12 7:08 PM, Eduardo Pestana wrote:
On Sun, Sep 9, 2012 at 11:18 AM, Alexander Hansen
alexanderk.han...@gmail.com mailto:alexanderk.han...@gmail.com
wrote:
On 9/9/12 3:39 AM, Eduardo
Dear All,
Updating octave, it failed to build:
octave-3.6.3/run-octave.in
sudo -u fink-bld [ENV] sh -c /tmp/fink.6ZPg5
[ -r /sw/fink/dists/stable/main/finkinfo/sci/octave-glpk.patch ]
sudo -u fink-bld [ENV] sh -c /tmp/fink.p0qSH
[ -r
On 9/9/12 3:39 AM, Eduardo Pestana wrote:
Dear All,
Updating octave, it failed to build:
octave-3.6.3/run-octave.in http://run-octave.in
sudo -u fink-bld [ENV] sh -c /tmp/fink.6ZPg5
[ -r /sw/fink/dists/stable/main/finkinfo/sci/octave-glpk.patch ]
sudo -u
On Sun, Sep 9, 2012 at 11:18 AM, Alexander Hansen
alexanderk.han...@gmail.com wrote:
On 9/9/12 3:39 AM, Eduardo Pestana wrote:
Dear All,
Updating octave, it failed to build:
octave-3.6.3/run-octave.in http://run-octave.in
sudo -u fink-bld [ENV] sh -c
On 9/9/12 7:08 PM, Eduardo Pestana wrote:
On Sun, Sep 9, 2012 at 11:18 AM, Alexander Hansen
alexanderk.han...@gmail.com mailto:alexanderk.han...@gmail.com wrote:
On 9/9/12 3:39 AM, Eduardo Pestana wrote:
Dear All,
Updating octave, it failed to build:
Hi list-
I just updated to Mountain Lion and followed instructions on fink home page to
get my fink distribution working (I upgraded OSX first, then had to follow the
plan B...). At update-all most things updated except
Failed: phase compiling: octave-atlas-x11-3.2.4-3021 failed
This has to
On 8/15/12 7:57 PM, Paul Wessel wrote:
Hi list-
I just updated to Mountain Lion and followed instructions on fink home page
to get my fink distribution working (I upgraded OSX first, then had to follow
the plan B...). At update-all most things updated except
Failed: phase compiling:
Sorry been away. Your information request are below.
/sw/src/fink.build/atlas-3.9.11-11/LAPACK
mkdir -p ../bld/lib
ar cr ../bld/lib/libf77blas.a BLAS/SRC/scabs1.o; ar cr
../bld/lib/libptf77blas.a BLAS/SRC/scabs1.o
cd ..
ln -s /sw/bin/gcc-4 gcc
export PATH=`pwd`:$PATH
pwd
cd bld
if [ i386
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
We're probably due for a newer upstream version of ATLAS, anyway,
since it's more likely to support newer hardware (and Lion).
- --
Alexander Hansen, Ph.D.
Fink User Liaison
http://finkakh.wordpress.com/
On 10/12/11 6:27 AM, Don Paul wrote:
Sorry
On 12 Oct 2011, at 15:23, Alexander Hansen wrote:
We're probably due for a newer upstream version of ATLAS, anyway,
since it's more likely to support newer hardware (and Lion).
In the unstable series, one is now at 3.9.52.
I didn't want to put the unstable series into fink, but now that
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 10/12/11 12:44 PM, Jean-François Mertens wrote:
On 12 Oct 2011, at 15:23, Alexander Hansen wrote:
We're probably due for a newer upstream version of ATLAS,
anyway, since it's more likely to support newer hardware (and
Lion).
In the
On 12 Oct 2011, at 19:37, Alexander Hansen wrote:
My recollection is that I (I'll take the blame) put 3.9.11 in Fink
because 3.8.4 misbuilt on one of the platforms I was using, 3.9.11
didn't and I wasn't aware that 3.9.x was an unstable series until the
deed was done
Just went to check to
Yes its an Atlas problem. I set for a single processor but the results are the
same as far as I can see.
The machine description and error message are below
sysctl -A 2/dev/null|fgrep machdep.cpu.brand_string
machdep.cpu.brand_string: Intel(R) Core(TM) i7-2720QM CPU @ 2.20GHz
make[7]: ***
Is it just me or is there still a problem with Octave in the Atlas variant?
touch dlib.grd
make[8]: *** [tstlib.grd] Error 2
TST: make drottest urout=rot1_x1y1.c opt=
cd /sw/src/fink.build/atlas-3.9.11-11/bld/src/testing ; make lib
make[8]: *** read jobs pipe: No such file or directory. Stop.
Am 06.10.2011 um 11:36 schrieb Don Paul:
make -j 8 dlib.grd
You're using a parallel make with 8 threads at the same time. Could you try
again with just one compilation thread or job? The missing directories or files
might be missing because some of the compile threads was or were too slow to
On 06 Oct 2011, at 15:14, Alexander Hansen wrote:
On 10/6/11 5:36 AM, Don Paul wrote:
bin/INSTALL_LOG/ERROR.LOG tar cf error_UNKNOWNx8632SSE3.tar
Make.inc bin/INSTALL_LOG/* gzip --best error_UNKNOWNx8632SSE3.tar
mv error_UNKNOWNx8632SSE3.tar.gz error_UNKNOWNx8632SSE3.tgz Error
report
I tried to compile this package but got this:
#!/bin/sh -ev
export CFLAGS='-O3'
export CXXFLAGS='-O3'
export FFLAGS='-O3'
if [ == ]
then
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 8/20/11 10:49 AM, Richard Miles wrote:
I tried to compile this package but got this:
snip
checking for i386-apple-darwin-g77... /sw/bin/gfortran checking
whether we are using the GNU Fortran 77 compiler... no checking
whether
On Mon, Sep 27, 2010 at 10:09 PM, Soumya Bera soumya.b...@kit.edu wrote:
Dear All,
Installing octave giving a lot of troubles. Please let me know how to solve
the problem as I don't have enough money to buy the expensive matlab.
After lots of compilation time...
Dear All,
Installing octave giving a lot of troubles. Please let me know how to solve
the problem as I don't have enough money to buy the expensive matlab.
After lots of compilation time...
---
.
.
Undefined symbols:
__glp_lib_fault_hook,
On Nov 23, 2009, at 4:39 PM, Martin Costabel wrote:
Ben Abbott wrote:
On Nov 22, 2009, at 10:09 AM, Martin Costabel wrote:
[]
Did the CrashReporter write something in ~/Library/Logs?
[]
The file below is from ~/Library/Logs/DiagnosticReports.
I don't really know what's going on; I can
Ben Abbott wrote:
[]
Is it possible that the wrong dylib is being loaded at run time? Is there a
way to (safely) test the idea?
The other libstdc++ is loaded because it is pulled in by some of the
dylibs liboctinterp-3.3.50+.dylib links to, for example
On Nov 24, 2009, at 8:23 PM, Martin Costabel wrote:
Ben Abbott wrote:
[]
Is it possible that the wrong dylib is being loaded at run time? Is there a
way to (safely) test the idea?
The other libstdc++ is loaded because it is pulled in by some of the dylibs
liboctinterp-3.3.50+.dylib
Ben Abbott wrote:
On Nov 22, 2009, at 10:09 AM, Martin Costabel wrote:
[]
Did the CrashReporter write something in ~/Library/Logs?
[]
The file below is from ~/Library/Logs/DiagnosticReports.
I don't really know what's going on; I can only speculate.
What looks suspicious to me is the
Ben Abbott wrote:
On Nov 21, 2009, at 4:25 PM, Martin Costabel wrote:
Ben Abbott wrote:
[]
Program received signal EXC_BAD_ACCESS, Could not access memory.
Reason: KERN_PROTECTION_FAILURE at address: 0x
0x02c0702f in std::locale::operator= ()
(gdb)
Maybe a backtrace bt would
On Nov 22, 2009, at 10:09 AM, Martin Costabel wrote:
Ben Abbott wrote:
On Nov 21, 2009, at 4:25 PM, Martin Costabel wrote:
Ben Abbott wrote:
[]
Program received signal EXC_BAD_ACCESS, Could not access memory.
Reason: KERN_PROTECTION_FAILURE at address: 0x
0x02c0702f in
On Nov 17, 2009, at 3:53 AM, Martin Costabel wrote:
[I migrated my 10.5 Fink to 10.6 (using 32bit), and deleted my static libs
left over from 10.5, and rebuilt them as needed]. Octave does build, but
when I try to run it ... $ ./run-octave
Bus error
Now this is a different story. It
Ben Abbott wrote:
[]
Program received signal EXC_BAD_ACCESS, Could not access memory.
Reason: KERN_PROTECTION_FAILURE at address: 0x
0x02c0702f in std::locale::operator= ()
(gdb)
Maybe a backtrace bt would give some more insight.
--
Martin
On Nov 21, 2009, at 4:25 PM, Martin Costabel wrote:
Ben Abbott wrote:
[]
Program received signal EXC_BAD_ACCESS, Could not access memory.
Reason: KERN_PROTECTION_FAILURE at address: 0x
0x02c0702f in std::locale::operator= ()
(gdb)
Maybe a backtrace bt would give some more
Don Paul wrote:
I seem to have a problem with dependencies when installing octave-
atlas. Is it just me? I notice that there is no maintainer for plplot
which may be part of the problem.
Thanks for any help.
Don
while trying to install:
octave-atlas-3.0.5-1
The following
Alexander
Thank you for your reply. It made me think. fink info plplot said
version was 5.8.0-1015. What I did was to force the removal of octave-
atlas and then install plplot which of course also reinstalled
octave. Doing things this way round seems to have worked. Perhaps you
Don Paul wrote:
Alexander
Thank you for your reply. It made me think. fink info plplot said
version was 5.8.0-1015.
Ah, but that shows the _latest_ version, not what is currently installed
on the system. One way to get that is:
dpkg -p plplot | grep Version
What I did was to force the
I seem to have a problem with dependencies when installing octave-
atlas. Is it just me? I notice that there is no maintainer for plplot
which may be part of the problem.
Thanks for any help.
Don
while trying to install:
octave-atlas-3.0.5-1
The following inconsistencies found:
Hello,
I sent this request to octave-help and they suggested that I ask fink
since that's how I installed it. If you think I should bug them
please let me know. I'm running Mac OS x 10.5.5 on my MacBook Pro
with Xcode 3.1.1.
The basic problem is that the plots in octave, which uses
Francis Poulin wrote:
Hello,
I sent this request to octave-help and they suggested that I ask fink
since that's how I installed it. If you think I should bug them
please let me know. I'm running Mac OS x 10.5.5 on my MacBook Pro
with Xcode 3.1.1.
The basic problem is that the plots
I'm not sure if the monolithic octave-forge even works with that
version of octave.
We're in the process of transitioning to having separate packages for
each octave-forge package--this may take a bit of time, so if you (or
anybody else) have any that you would like to have available right
This is the error message which I got some lines above
Everything else seemed to be ok:
find . -name NOINSTALL -print# shows which toolboxes won't be
installed
/usr/libexec/gcc/i686-apple-darwin8/4.0.1/ld: Undefined symbols:
_mxCreateLogicalScalar
collect2: ld returned 1 exit
On Oct 7, 2008, at 7:54 AM, Daniel Schulte wrote:
Hi everyone,
I have tried to install octave-forge under Mac OS X tiger with fink,
but it failed. I have installed octave a while ago (version 3.0.1). I
have got the following error message :
error: called from `pkg:configure_make' in file
Hi everyone,
I have tried to install octave-forge under Mac OS X tiger with fink,
but it failed. I have installed octave a while ago (version 3.0.1). I
have got the following error message :
error: called from `pkg:configure_make' in file /sw/share/octave/
3.0.1/m/pkg/pkg.m near line 1245,
Wei Tang wrote:
Hi,
I found out there are some problems with octave-atlas 3.0.0-4, which
can be compiled but will crash when using. Specifically, I tried the
following commands:
a = randn(700,700);
b = a'*a; % === this line will cause octave crash.
but if I only try a',
On 27 Apr 2008, at 11:48, Martin Costabel wrote:
Wei Tang wrote:
Hi,
I found out there are some problems with octave-atlas 3.0.0-4, which
can be compiled but will crash when using. Specifically, I tried the
following commands:
a = randn(700,700);
b = a'*a; % === this line will
My machine is Intel Core 2 Duo running on Mac OS X 10.5.2.
I have uninstall the atlas part. But I would like to re-install it and
post the debug info on the list if you could show me what kind of info
would be considered useful in solving this problem.
On Sun, Apr 27, 2008 at 10:23 AM,
Wei Tang wrote:
My machine is Intel Core 2 Duo running on Mac OS X 10.5.2.
Same here.
--
Martin
-
This SF.net email is sponsored by the 2008 JavaOne(SM) Conference
Don't miss this year's exciting event. There's still
Hi,
I found out there are some problems with octave-atlas 3.0.0-4, which
can be compiled but will crash when using. Specifically, I tried the
following commands:
a = randn(700,700);
b = a'*a; % === this line will cause octave crash.
but if I only try a', which is ok.
Anybody could
I am building octave-3.0.0-3 with gcc4.3 on my ibook G4 currently, but
when I fink selfupdate my iMac G5, fink will not find octave-3.0.0-3
even though I have the current octave.info file which states the
revision should be 3. Therefore, I am not able to build
octave-3.0.0-3 on the G5.
On Mar 17, 2008, at 9:32 PM, Gary K Olson wrote:
I am building octave-3.0.0-3 with gcc4.3 on my ibook G4 currently, but
when I fink selfupdate my iMac G5, fink will not find octave-3.0.0-3
even though I have the current octave.info file which states the
revision should be 3.
Matthew Parry wrote:
it seems i am not the first person to have issues with octave 2.9.x
and gnuplot 4.2 and aquaterm, but any help would be greatly
appreciated. (10.4.10 intel MBP, latest fink, unstable, all updated)
gnuplot works just fine. i display plots in aquaterm and can
I had the same problem with Sun Solaris.
After installing Gnu sed and awk from http://sunfreeware.com/ it worked.
Maybe it is only necessary to install sed.
Something is wrong with the sed command in libcruft/mkf77def.in
/hans
Koen van der Drift wrote:
Jeff,
The new octave package
OS 10.4.9
PowerPC
Xcode Tools 2.4.1
Because the failure mode was such that items would error out but the
build would continue, it would be lengthy to post the output here. I
have instead posted the build log at
It works now after a new commit this morning.
- Koen.
On May 28, 2007, at 4:51 PM, Martin Costabel wrote:
Koen van der Drift wrote:
[]
REGEX libraries:
I have here
REGEX libraries: -lpcre
[]
configure: WARNING: PCRE library not found. This will result in
some loss of
Jeff,
The new octave package fails compiling. I have included the Terminal
output below. I am using an iMac G5.
- Koen.
...
Octave is now configured for powerpc-apple-darwin
Source directory: .
Installation prefix: /sw
C compiler: gcc -Wall -W -Wshadow -g -O2
Martin Costabel wrote:
Jean-François Mertens wrote:
On 28 Dec 2006, at 00:02, Martin Costabel wrote:
[]
Right: I do have libcdparanoia0-dev installed, but it installs now
(since a commit by dmacks on march 21):
/sw/include/libcdparanoia/utils.h
which means, all those BuildConflicts
I am CCing the maintainer of the coot package. Maybe he finds a way to
hide this pernicious /sw/include/utils.h someplace else?
--
Martin
It is gone.
-
Take Surveys. Earn Cash. Influence the Future of IT
Join
Robert T Wyatt wrote:
I've removed coot-dev and am attempting the build again now.
I've successfully built and installed octave now. :-) It took me a while
because I had to leave to play music for a few hours (http://bentones.us/).
Hi,
On my dual G5 using fink's 10.4-unstable tree, I get the following error
(maintainer cc'd). The complete output with enviro data is available
here: http://robertwyatt.info/fink/octave-2.1.73-2.txt
g++ -c -no-cpp-precomp -I/sw/include -I. -I.. -I../liboctave -I../src
-I../libcruft/misc
Robert T Wyatt wrote:
Hi,
On my dual G5 using fink's 10.4-unstable tree, I get the following error
(maintainer cc'd). The complete output with enviro data is available
here: http://robertwyatt.info/fink/octave-2.1.73-2.txt
I built this version on a dual G5 without error. I suspect this is a
Martin Costabel wrote:
Robert T Wyatt wrote:
Hi,
On my dual G5 using fink's 10.4-unstable tree, I get the following
error (maintainer cc'd). The complete output with enviro data is
available here: http://robertwyatt.info/fink/octave-2.1.73-2.txt
I built this version on a dual G5 without
Robert T Wyatt wrote:
Martin Costabel wrote:
[]
The declaration of empty_arg is in the header file utils.h. Do you
perhaps have another utils.h sitting in /sw/include or in
/usr/local/include that shadows octave's own utils.h?
Well, very likely there is a better way to answer this
1 - 100 of 139 matches
Mail list logo