Re: [Flexradio] Radio

Yes. Sent from my iPad > On Mar 12, 2017, at 11:07 AM, William and Sue wrote: > > Good morning all, > Is there a way to use the flex 3000 as a receiver > and transmit on something else. > Bill > ___ > FlexRadio Systems Mailing List >

Re: [Flexradio] FlexRadio Digest, Vol 139, Issue 3

One thing that sometimes happens is inadvertently leaving TX on the DX frequency. Could that have occurred? George J. Molnar @GJMolnar > On Nov 26, 2016, at 12:00 PM, flexradio-requ...@flex-radio.biz wrote: > > Send FlexRadio mailing list submissions to >flexradio@fl

[Flexradio] a 1500 for sale

the shipping. Respond off list at george (at) gloria (dot) us. George k2CMe ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz To opt out of the Reflector: http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz

Re: [Flexradio] Transverter Store

gnal. Quickly went to an Elecraft on 432 with much better results. Liked it so much, I am now building a 144XV. If someone would like an assembled 432 Transverter Store unit, make me an offer! 73, George/KF2T ___ FlexRadio Systems Mailing List FlexRadio@f

Re: [Flexradio] Windows 10 PowerSDR?

I've been using the insider version of windows 10 after upgrading from Win 7 and I have had no issues -Original Message- From: Don [mailto:kd...@sonic.net] Sent: Wednesday, July 29, 2015 10:32 AM To: Flex Radio FlexRadio@flex-radio.biz Subject: [Flexradio] Windows 10 PowerSDR? I'm

Re: [Flexradio] Flex 5K Fwd Pwr Readings ??

If I remember correctly, the F1.5K does not have a power or swr meter build it. George K2CM - Original Message - Subject: [Flexradio] Flex 5K Fwd Pwr Readings ?? From: Mike Rhodes w...@roadrunner.com Date: 7/23/15 3:46 pm To: flexra...@yahoogroups.com flexra...@yahoogroups.com

Re: [Flexradio] flex 1500

transverters from Elecraft or DownEast microwave - Original Message - Subject: [Flexradio] flex 1500 From: Bill and Sue ope...@rcn.com Date: 4/27/15 11:51 am To: FlexRadio@flex-radio.biz Hi folks I may have asked this before but I am going to ask again. The Flex 1500, can it

Re: [Flexradio] Computer problem with Flex 3000

Give Neil a phone call, I suspect that he is the best guy to give you advice seeing that he built the computer. George K2CM - Original Message - Subject: [Flexradio] Computer problem with Flex 3000 From: Rick Tarbert a...@zoominternet.net Date: 9/14/14 8:49 pm To: flexradio

Re: [Flexradio] Garbled output

Power down to about one watt after rebooting the computer and restarting PSDR. Power down the radio too. If the problem is reduced or eliminated, you have RF getting into the computer. if this is the case,put ferrite cores on all cables...both ends . Make sure you have a good ground.

Re: [Flexradio] 5 k shutting down

Does it shut down on transmit, or after transmitting. If you reboot the radio and software and don't transmit, does it shut down? George K2CM - Original Message - Subject: [Flexradio] 5 k shutting down From: Robert Kearbey bobdds2...@gmail.com Date: 7/16/14 8:13 am

[Flexradio] yes

want regular delivery or digest delivery It was me I thought I needed to send my interest in keeping on the delivery list. I guess I'm mistaken sorry george wi9i ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz To opt out of the Reflector

Re: [Flexradio] Complete Remote Solution

I use remotehams.com With my 6700. K2CM - Original Message - Subject: [Flexradio] Complete Remote Solution From: Larry Loen lwl...@gmail.com Date: 6/18/14 4:55 pm To: FlexRadio Reflector FlexRadio@flex-radio.biz OK, a while back, I discovered that there is a satisfactory

Re: [Flexradio] Flex 5000A For Sale

Flex 5000A is sold. - Original Message - From: George Fenwick gafenw...@att.net To: flexradio@flex-radio.biz Sent: Saturday, May 31, 2014 2:55 PM Subject: [Flexradio] Flex 5000A For Sale For Sale: Flex 5000A with 2nd Rcvr and ATU. SN: 3209-2480. Purchased August 2009

[Flexradio] Flex 5000A For Sale

or we can discuss. contact off list. George Fenwick W2AIV ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz To opt out of the Reflector: http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz

Re: [Flexradio] monitor problems

Have had similar problems. Try it with one watt output. If the problem goes away, it's RF feedback. Lots of ferrite cores and a good ground will probably solve the problem. - Original Message - Subject: [Flexradio] monitor problems From: w...@reagan.com Date: 5/28/14 2:11 pm

[Flexradio] Connecting Flex 1500 to Ten Tec 814 (amp)

Do I need to place a diode on pin 3 (flex) from pin 8 (tentec) to  block a surge from the amp relay opening? Also, has anyone tried attaching pin 6 (flex) to pin 5 ( tentec)  - Clock     pin 7 (flex) to pin 7 (tentec) - data Thanks Grady aj4ya

[Flexradio] Flex 1500 w/desk mike FS

Flex 1500 Good condition from smoke free household, with original box, software, power cord, USB cable, Kenwood KMC-9 deskmike and antenna adapter. $550 shipped in US When a strong man, fully armed, guards his own house, his possessions are safe. Luke 11:21

Re: [Flexradio] FLex-1500 ...loss of audio

Does the problem occur after transmitting? - Original Message - Subject: [Flexradio] FLex-1500 ...loss of audio From: Ray Bahm rb...@computer.org Date: 4/2/14 8:36 pm To: FlexRadio@flex-radio.biz I have a similar problem ... Often when I turn-on my 1500 the audio output from

Re: [Flexradio] CW

I have a F1500 that I use on CW. I put the USB cable on a high-speed port. I also removed a couple of background processes that were hogging CPU time. I have no latency on CW. George K2CN - Original Message - Subject: Re: [Flexradio] CW From: Fuad Arnautovic info

Re: [Flexradio] Low Flex 3000 output on 20m

. George K2CM - Original Message - Subject: [Flexradio] Low Flex 3000 output on 20m From: k...@arrl.net Date: 3/23/14 10:56 am To: flexradio@flex-radio.biz The output from the Flex is different on different bands on my four year old Flex 3000. Some bands more than 100, some less

Re: [Flexradio] Can't post in community. Says sign in to post I AM signed in!!

I am able to post without any problems, and regularly post on various different products and issues. you must first set up an account, log in via Get Satisfaction, then follow the instructions to,set up a new account. Once your new account is set up, you will be able to post. George K2CM

Re: [Flexradio] A problem of a different sort

I Had this same problem a long time ago. I replaced the monitor with a newer model and the problem went away. From what I have learned over the years, some monitors cause problems, some don't. George K2CM - Original Message - Subject: [Flexradio] A problem of a different

[Flexradio] Powered Speakers

I'm pretty happy with a pair of small Bose Companion 2, Series III speakers I have. Good RF immunity, dual inputs (rig and PC), nice sound. http://www.amazon.com/gp/product/B00CD1PTF0/ref=wms_ohs_product?ie=UTF8psc= 1 George J. Molnar Nevada, USA Amateur Radio: KF2T Twitter: @GJMolnar

[Flexradio] Bose Companion III RF noise

difference. George J. Molnar Nevada, USA Amateur Radio: KF2T Twitter: @GJMolnar BEWARE !!! Bose Companion Series I speakers work great. (But are no longer manufactured.) Bose Companion Series II speakers work great. (But are no longer manufactured.) Bose Companion Series III speakers were redesigned

Re: [Flexradio] Portable power supply for Flex-3000?

The SEC 1235M is also great. I have used it and its meterless cousin for many years without any trouble. AES sells them (among others). George, NY2O -Original Message- From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Steve Nance Sent: Thursday, September 19, 2013

Re: [Flexradio] Flex 3000 for DX'ing and SDR

Hi all, Is there a USB to Firewire adapter that anyone has used successfully with a Flex 5000? I'm trying to replace the computer in my 5000C with a mint ITX board. The board will fit and everything else seems OK except that it has no firewire available. Thanks George, NY2O -Original

[Flexradio] VAC Keying

the radio application audio. You don't want to throw Windows noises on the air, or interfere with your normal PC use. 73 see you on the bands! George J. Molnar Nevada, USA Amateur Radio: KF2T Twitter: @GJMolnar Message: 4 Date: Mon, 8 Jul 2013 15:18:34 -0400 From: ric5 r...@earthlink.net

[Flexradio] What finally happened with failure to connect problem

). The problem disappeared instantly and the radio now works fine. George, PJ5/KJ6VW ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com

[Flexradio] Blooming Signals

I've had good results with the JT modes by turning AGC to Fixed, and using AGC-T to set baseline signal levels (zero on quiet frequency). No blooming, no blackout in the waterfall. George J Molnar Amateur Radio KF2T Twitter @GJMolnar ___ FlexRadio

Re: [Flexradio] Radio disappeared

working with Dudley on this. George, PJ5/KJ6VW ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base

[Flexradio] Radio disappeared

My Flex-3000 has disappeared. I'm running Win7 64 bit, VIA chip set FDDI. I've tried three different FDDI cables and two different PCs (and FDDIs) with PSDR v2.6.4 installed exactly according to instructions. I get the same No devices found message in each case. What should I do next? George

[Flexradio] VAC Setup for Flex1500

worth it. Having a periodic voice stamp in your audio, transmit or receive, is a bad thing. Good luck!!! George J Molnar Las Vegas, USA Amateur Radio: KF2T Twitter: @GJMolnar On Jan 18, 2013, at 10:00 AM, flexradio-requ...@flex-radio.biz wrote: Send FlexRadio mailing list submissions

[Flexradio] Tokyo Hi-power amp hookup

or the parts to make my own? I love my 1500 but there are just times when a little more power is needed. Thanks for the help   George KC0GP ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex

[Flexradio] Balun Designs

Put me down as another endorser of Balun Designs. Not that MFJ is bad - it will probably work for you - but Balun Designs is better. Much better. George J Molnar Las Vegas, USA Amateur Radio: KF2T Twitter: @GJMolnar ___ FlexRadio Systems

[Flexradio] Baluns and Ferrites

. 73, George J Molnar Las Vegas, USA Amateur Radio: KF2T Twitter: @GJMolnar ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com

[Flexradio] 3 Gb RAM?

irregular operation. I'd recommend getting a matched set of RAM modules and trying that. You'll need to consult your motherboard docs to see what speed and capacities are supported. George J Molnar Las Vegas, USA Amateur Radio: KF2T Twitter: GJMolnar

Re: [Flexradio] FlexRadio Digest, Vol 91, Issue 4

Running the 1500 under Win7/64 here. Smooth as can be. Have you reinstalled the Flex drivers (remove them from Device Manager first)? George J Molnar Las Vegas, USA Amateur Radio: KF2T Twitter: GJMolnar On Nov 4, 2012, at 10:00 AM, flexradio-requ...@flex-radio.biz wrote: Send

[Flexradio] Images 1500

no amplifier, here. Also running PSDR 2.4, under Win7/64. George J Molnar Las Vegas, USA Amateur Radio: KF2T Twitter: GJMolnar ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo

[Flexradio] Sdr

Have a nice 3000 that is for sale. Want to update. Contact me off line,thanks...George kf9wv ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail

Re: [Flexradio] CW Skimmer with PowerSDR v2.4.4

settings and I don't see any thing that has changed in VAC, Skimmer or PSDR. It looks like the I/Q data is not getting to Skimmer. Like Bernie said any suggestions. Thanks. 73 George W2GS On 9/5/2012 1:03 PM, Bernie Huth wrote: I am not able to get CW Skimmer v 1.71 to decode properly

Re: [Flexradio] CW Skimmer with PowerSDR v2.4.4

Tim, I found the problem. After the upgrade Skimmer decided to use VAC 34 instead of 12. Once this was changed it started to work. I don't know why Skimmer picked the different audio channels but it happened. Thanks for looking at the problem. 73 George W2GS On 9/5/2012 2:16 PM, Tim

[Flexradio] CW Pitch thru 8 pole 250HZ filter

How can I change the CW pitch when listening thru the 8 pole 250HZ filter? I tried changing the pitch through the front panel; but, it does not change the received pitch thru the filter. George K2CM ___ FlexRadio Systems Mailing List FlexRadio@flex

Re: [Flexradio] Lots of lightly used Flex Radios for sale.

long since replaced it with a series of shiny new radios that have breathtakingly better performance, and fit in a shirt pocket? George On 23-Aug-12 11:17, Patrick Greenlee wrote: -- Won't the RohS solder fail in Flex before 50 years

[Flexradio] Delays and Buffers?

? Thanks/73 George J Molnar Twitter: @GJMolnar Amateur Radio: KF2T ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex

[Flexradio] FLEX1500 with Steriods

to worked the DX station. -- George Rebong KE6TE Sent from my iPad 3G ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio

[Flexradio] Window 7

My Laptop XP crushed that I am using for my FLEX1500. Now I have to use my Desktop Windows 7 with 8 Gig memory. I wonder if I can run PowerSDR and Internet or maybe PowerDSR and WINtest login program at the same time. 73 -- George Rebong KE6TE

[Flexradio] Digital Mode

Ok, I have my Flex1500 running to my 6BTV antenna, I am planning to change my antenna to G5RV. I am a CW guy. So my question is what are Digital software that will work with POWERSDR? I would like to try FSK and JT65. 73 -- George Rebong KE6TE

Re: [Flexradio] How can I put a RX only antenna with a preamp on RX1? - Warning!

tinkering it works quite well for me, but I live in a rural, low QRM environment. George, PJ5/KJ6VW To: Flex Radio flexradio@flex-radio.biz Subject: [Flexradio] How can I put a RX only antenna with a preamp on RX1? Message-ID: 1214912018.826608.1329179525115.javamail.r

Re: [Flexradio] Flex 3K and 5K software shut down QRO

from being induced on the cables in your shack. George, PJ5/KJ6VW On 13-Sep-11 11:29, Brian Lloyd wrote: I have been holding off to weigh in here on this discussion and now I feel the need. First, I am going to blaspheme and tell you that grounding doesn't matter. That's right, you heard me

Re: [Flexradio] My settings - Skimmer does not seem to decode as well as before latest PSDR upgrade

Hi Tim, What the is blind mode? George W2GS -Original Message- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz]On Behalf Of Tim Ellison, W4TME Sent: Saturday, August 27, 2011 6:36 PM To: vtnn...@comcast.net Cc: Flex Radio; t...@flexradio.com Subject: Re

Re: [Flexradio] flex-5000 +Acom Amp info

Also make sure the relay box is checked on the antenna form or you will go crazy. Best of luck. George W2GS -Original Message- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz]On Behalf Of Boyan Sent: Thursday, July 21, 2011 2:27 PM To: paim; flexradio@flex

Re: [Flexradio] Using CW Skimmer

I run mine with MME, all the other settings are as Bill outlined below. For some reason I couldn't get WDM to work, but it works FB with MME. George W2GS -Original Message- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz]On Behalf Of Bill Sent: Thursday

Re: [Flexradio] Voice keyer through PSDR truncates end of audio on output, progressive worsening

I noticed something similar running MARS-ALE with my Flex-3000. I didn't find a solution and eventually gave up. George, PJ5/KJ6VW On 05-Jul-11 11:44, kd0...@gmail.com wrote: Hi, I originally posted a version of this to N1MM's reflector, but further troubleshooting points to PowerSDR so I'll

Re: [Flexradio] FlexRadio Digest, Vol 71, Issue 18

automatically sets the tuning values. An option for Flex would be to also do this on receive, but it should be possible to disable the option. George, PJ5/KJ6VW On 19-Mar-11 0:55, John Vandenberg wrote: Wonder if someone from flex could confirm if this remember ATU by band is included on the next

[Flexradio] Computer for Flex 1500 specs.

??? Hard drive ??? , RAM for Win 7 64 bit ??? Which Asrock motherboard ??? Just a computer to run SDR and nothing else !!! And thanks to Neil for his help with my 1500 !!! It went back to Dallas for possible hardware issues. Now its Flex withdrawl time .. hihi George Osier , N2JNZ

[Flexradio] The latest ........

stuck here. Thanks !!! George , N2JNZ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http

[Flexradio] More news .......

Flex 1500 and running .19 here .. When I insert the the key plug into the jack partway in it keys up the Flex . when pushed all the way in . nothing ..? Plug or jack failure ? 72 George , N2JNZ ___ FlexRadio Systems Mailing

[Flexradio] CW problem

I was operating SSB and the panadaptor went white with a red cross over it ... shut down and rebooted .. no CW from bug or external keyboard but can send CW thru internal keyboard ? Did a reset database and still no cw on bug or keyboard (K1EL) ??? George , N2JNZ

Re: [Flexradio] [Bulk] FLEX5K Drops Amplifier

problem, I used an outboard circuit until the problem went away. Also a Heil foot switch has a two sets of contacts that can delay the amp coming on until the exciter has stabilized. I hope this helps. 73 George W2GS -Original Message- From: flexradio-boun...@flex-radio.biz [mailto:flexradio

[Flexradio] Specs .......

I've spoken with Neil a bit on this . What are the most important specs to have when building a SDR computer??? Quad core , L3 cache , USB chip ?? Thanks !!! George , N2JNZ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http

Re: [Flexradio] v2.0.19 !!!

On 2/19/2011 9:24 AM, George Osier wrote: I have the 1500 and noticed a big improvement in CW. Also the filters are working as they should. I have the Buffers all at 512 and took SR off. Used it in the ARRL DX INT last nite on 40 meters and found if I could hear it I could work it !! ZM1A

[Flexradio] ARRL DX INTERNATIONAL

on 40 !! I used S+P for the whole test and if I could hear em I could work em Cant wait for the SKS and I'll be able to use all of my bugs now !!! 72 George Osier , N2JNZ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http

[Flexradio] v2.0.19 !!!

change was CPU usage with the .16 I was getting 15% to 90% in a up and down pattern. With the .19 it stays steady at 30%. Computer here is a HP laptop with a AMD Turion II dual core 2.40 GHz , L3 cache and 4 GB ram. Liking it a lot so far and tonite will tell more !!! George Osier

Re: [Flexradio] [FlexRadio] 2.0.19 CW Keying

.. some of the characters you have dealt with professionally. 73 George W2GS -Original Message- From: flexra...@yahoogroups.com [mailto:flexra...@yahoogroups.com]On Behalf Of Tim Ellison Sent: Saturday, February 19, 2011 2:31 PM To: flexra...@yahoogroups.com; flexradio@flex-radio.biz

Re: [Flexradio] Flex 3000 Newbie question

Hi Sasi, A Flex 3000 doesn't require a sound card. It has its own ADC and DAC. I can't comment on the suitability of your Lifebook but perhaps others can. There seem to be several Lifebook models with significant differences in their processing power. Which one do you have? George, PJ5/KJ6VW

Re: [Flexradio] Voltage drop?

rarely use remote sensing because it can lead to over-voltage conditions if you break a sense wire and sometimes instability in the power supply too. George, PJ5/KJ6VW On 02-Jan-11 8:55, Alan NV8A wrote: On 01/01/11 05:38 pm, Ralph W5JGV wrote: I have just noticed that although a DVM across

[Flexradio] Transverter for 1500

Where would I get a 2 meter transverter for Flex 1500 73 George , N2JNZ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com

Re: [Flexradio] Asus M4A785-M Motherboard ?

. It will work for a limited time, but you will have to pay for a Win 7 license to register it and get updates. George, PJ5/KJ6VW On 29-Dec-10 11:31, Tim N9PUZ wrote: Anyone have data good or bad on the Asus M4A785-M Motherboard with respect to PowerSDR? I received an ad today for a bundle http

[Flexradio] Questions about antennas and spectral displays...

set up a Flex, you can certainly use EZNEC. George, PJ5/KJ6VW ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex

Re: [Flexradio] SSB Audio Issues

a number of times is the proper connection of the mic +/_ lines and the ground. Make sure the mic is connected per the manual. 73 George W2GS -Original Message- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz]on Behalf Of Richard Lawn Sent: Wednesday, December

Re: [Flexradio] Which OS for i7 new PC?

ever need to. George, PJ5/KJ6VW On 22-Dec-10 13:48, Jim Jannuzzo wrote:... ... I installed Home edition, and was disappointed to later find that it does not have network backup functionality. I believe Professional does include backup to a network device. I can add another program to do

Re: [Flexradio] Pauses in cw character transmission

agree completely with Brian that realtime OSs are better for SDR than multi-user, multi-tasking OSs like Windows. Dedicated DSP chips with no OS at all are better still. George, PJ5/KJ6VW On 17-Dec-10 13:01, Brian Lloyd wrote: ... For better or worse, transmitting CW happens to be the one

Re: [Flexradio] New 5000A User - TX Audio (severe distortion) Issues

grounded, the better everything worked. The same with the ferrites. And don't forget the wires to wall-wart power supplies. Best of luck, if you keep at it you will cure the problem. George, PJ5/KJ6VW On 05-Dec-10 16:23, Bradley Feldman wrote: Army, et al: At this point, I'm suspecting RF as well

Re: [Flexradio] Kaspersky anti-virus identifies Flex .exe files asmalwear

I use Kaspersky, and it has never found anything wrong with PSDR files on my machine. If it were me and I was not using the files, I would get rid of them. George, PJ5/KJ6VW On 27-Nov-10 13:45, TOM BLACKWELL wrote: I have several Flex programs on the hard drive of one of my computers. I

Re: [Flexradio] Which Antenna?

and 60m) It's light and easy for me to take down/put up in tropical storms and hurricanes (a problem at my QTH) I can use it for scanning modes like ALE without an external tuner George, PJ5/KJ6VW On 16-Nov-10 22:01, Justin M. Mayrand wrote: Hey All, New Flexer here - I finally have the 3K

Re: [Flexradio] FlexRadio-An Important Perspective

software development or writing code. George, PJ5/KJ6VW On 10-Nov-10 15:38, Peter G. Viscarola wrote: I don't write code, myself, but I just chatted a buddy who works for Google who pointed out a couple of things. First, at least at Google, two lines per programmer per day would be considered

[Flexradio] Question

I really like the new 2.0.16 but I have a question. Will PowerSDR eventually support multiple Flex-1500s running simultaneously on the same PC? How soon might that happen? George, PJ5/KJ6VW ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz

Re: [Flexradio] DICE(y) problem?

malware infestations. I'm very happy that MS builds in so many protections, otherwise I would have no time left for hamming at all. George, PJ5/KJ6VW On 10/18/2010 14:24, Neal Campbell wrote: I think the ill feeling towards MS is very unwarranted in general. They are trying to dance in front of a lot

Re: [Flexradio] DICE(y) problem?

. As it happened, that Agency had recently done something that offended Mr. Gates, and so the plan was rejected. As a computer user, I feel very lucky that it turned out that way. George, PJ5/KJ6VW ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http

[Flexradio] CM-500 heandphone

and sleeve before feeding it to the yeasu pig tail connected to the Flex front panel mic connector. I also have a Heil headset and it works fine...the only difference seems to be the connector. -- *George J. Vesnaver* E : george.vesna...@gmail.com mailto:george.vesna...@gmail.com VE2EWQ

Re: [Flexradio] Windows 7 x 64 bit of an issue

) every morning and evening the problem does not seem to occur. I'd love to find a less time-consuming solution, though. George, PJ5/KJ6VW On 10/2/2010 05:52, David Walker wrote: Hi, I've got my radio back and on air. Thanks to FlexRadio systems for fantastic warranty support. Their responsivity

Re: [Flexradio] OT: Upgrading to Win7?

I'm running both a Flex-1500 and a Flex-3000 on a Windows 7 64-bit machine without problems. You have to pay for the virtual port program for 64 bit but it's not too pricey. George, PJ5/KJ6VW On 9/16/2010 09:52, James Austin wrote: Advantage of 64-bit is that you will be able to use all 4GB

[Flexradio] Drifting noise hills

of noise for some distance around. George, PJ5/KJ6VW ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge

Re: [Flexradio] Drifting noise hills

Thanks, Brian, this is all excellent advice and it's actually what I did. Yes, my antennas (4) are verticals with about 32 ground radials each, and yes, there is a grounded cable entry plate with lightning arresters in the feed-through connectors. I recommend the procedure to others. George On 9

Re: [Flexradio] CE compliance on preamp?

to the three receivers with separate receive and transmit antennas. The local oscillator from each receiver appears as a birdie in the other two receivers unless I turn on the preamp. George, PJ5/KJ6VW On 9/1/2010 18:10, Ray - K9DUR wrote: Drax, It is not incoming conducted emissions

Re: [Flexradio] [Bulk] Re: More computer questions--mouse, trackball, etc ??

and have not seen any delays in the response of the trackball, mouse wheel, or buttons. Also have a Shuttle PRO hooked up while using the mouse and not seen a problem. Running XP with PSDR 2.0.7. Obviously system performance will vary. Good Luck 73 George W2GS -Original Message- From

[Flexradio] Flex-1500 antenna setting

When I set the Flex-1500 to receive on XVRX in Simple Mode, and then re-start PSDR, this setting seems to be lost. Is there a way to keep this setting through re-starts? George, PJ5/KJ6VW ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http

Re: [Flexradio] Flex-1500 antenna setting

Tim, it is 2.0.7. George On 8/9/2010 09:43, Tim Ellison wrote: What version of PowerSDR are you using? If it is not 2.0.7, then please install the 2.0.7 version and re-verify that the problem till exists. -Tim When I set the Flex-1500 to receive on XVRX in Simple Mode, and then re

Re: [Flexradio] Satellite Users

I did this with a Flex-3000 and PTC-IIe some months ago. The signals you need are on the Flexwire connector. It helps if you start with a cable from SCS with the DIN connector already attached since these are hard to solder. I found it quick and easy to do, and it worked exceedingly well. George

Re: [Flexradio] small amp for the 1500

amps. George, PJ5/KJ6VW On 7/29/2010 13:16, y...@aol.com wrote: Looked at the packer 30+ watt amp for the 1500,looks like a nice project. Has anyone found a simular type of amp some where else. Please get back . thanks dale wt4t ___ FlexRadio

Re: [Flexradio] PSDR 2.0.x and Flex 1500: Why IF 9000 or 5000 kHzand not 0 kHz?

Gerald, Is the only advantage of doing this centering the carrier in the panadapter? Thanks. George W2GS -Original Message- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz]on Behalf Of Gerald Youngblood Sent: Saturday, July 10, 2010 9:01 AM To: DL1FUX Cc

Re: [Flexradio] Flex Radio Net

Pick a time/freq and I'll join you. George Apalachin, NY K2CM FN22 From: James C.Miller [mailto:cameo...@frontiernet.net] Sent: Wed 6/23/2010 6:02 AM To: Flexradio Subject: [Flexradio] Flex Radio Net Is there another Flex Radio net other than he one

Re: [Flexradio] FlexRadio Digest, Vol 62, Issue 23

Pick a time/freq and I'll join you. George Apalachin, NY K2CM FN22 From: flexradio-boun...@flex-radio.biz on behalf of flexradio-requ...@flex-radio.biz Sent: Wed 6/23/2010 12:00 PM To: flexradio@flex-radio.biz Subject: FlexRadio Digest, Vol 62, Issue 23

[Flexradio] 2.0 Beta - Panadapter image

7.000. Also see many other images. Happens on other bands too. These appear to be panadapter images. When clicking on the images, nothing is there. I did not see this happening on 1.18.2 Any thoughts? George K2CM ___ FlexRadio Systems

[Flexradio] F5K 2nd Receiver, Wow!

! Having now looked into inside of the F5K, it is cleverly designed.should be easy to maintain in the unlikely event of a problem. George K2CM/J8K2CM ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman

Re: [Flexradio] F5K 2nd Receiver, Wow!

Holy Cow! I expect to put up a 2nd antenna in the near future. That should give me some real diversity! -Original Message- From: Tim Ellison [mailto:telli...@itsco.com] Sent: Thursday, June 10, 2010 11:35 AM To: George Allen; flexradio@flex-radio.biz Subject: RE: F5K 2nd Receiver, Wow

Re: [Flexradio] ALC

adjusting for ALC peaks of less than 0. I use two different amps, an Acom 2000A and a Tokyo High Power HL 1.5KFX. The only thing I adjust now is the drive level to the amps. Hope this helps. George W2GS -Original Message- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun

[Flexradio] Another Success Story

a computer should be able to load the software and get his Flex up and running in a few minutes! It is not a requirement to be a software Guru. George K2CM/J8K2CM ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex

Re: [Flexradio] FlexRadio 3000 trouble

I had this exact same problem when in Bequia. I could not get an RF ground. I would key the rig and the computer would lock up. RF cores everywhere fixed the problem! If you don't have any RF cores, try putting a good RF ground to a ground rod to the F3K. George K2CM/J8K2CM -Original

Re: [Flexradio] Motherboards that work

not yet tuned win7 as I am looking for anyone that may have already performed this work with good success and would have a good procedure to follow. Would you advise purchasing a separate fireware card with this particular motherboard? Thanks, George VE2EWQ

  1   2   >