Looks like someone wrote an EXEC (or maybe a module) -- 'dt' is not a
standard z/VM command.. LISTFILE DT * * to figure it out.
Scott Rohling
On Wed, Aug 10, 2011 at 12:45 PM, James Hammons jam...@cdg.ws wrote:
dt
13:46:20 - Wednesday 10 Aug 2011
Ready; T=0.01/0.01 13:46:20
No need to re-ipl .. just format the page volumes, allocate as page, label
correctly and attach them to the system...
Scott Rohling
On Tue, Aug 9, 2011 at 6:13 AM, Rich Smrcina r...@velocitysoftware.comwrote:
For your initial IPL at DR, you won't need your PAGE packs at all... yes,
the IPL
On Tue, Aug 9, 2011 at 6:39 AM, Scott Rohling scott.rohl...@gmail.comwrote:
No need to re-ipl .. just format the page volumes, allocate as page, label
correctly and attach them to the system...
Scott Rohling
On Tue, Aug 9, 2011 at 6:13 AM, Rich Smrcina r...@velocitysoftware.comwrote
Don't you still need to format 1-END? In my experience, you can end up
with paging errors if the dasd isn't initialized/formatted. Haven't tried
just cylinder 0 though, so I could be wrong..
Scott Rohling
On Tue, Aug 9, 2011 at 6:06 AM, Gentry, Steve
steve.gen...@westernsouthernlife.com
Yes, I meant that you still need to format those allocated as PAGE (or any
non PERM type).. I'm used to seeing full volumes so said 1-END..
Personally - I prefer to format/allocate in one step (single cpfmtxa
format/allocate)
Scott Rohling
On Tue, Aug 9, 2011 at 12:26 PM, gclo...@br.ibm.com
by things like two users linking the disk RW - or
overlapping disks..
Scott Rohling
On Fri, Aug 5, 2011 at 9:47 AM, saurabh khandelwal
sourabhkhandelwal...@gmail.com wrote:
Hello,
We have zVM 5.4 System. And I am trying to login with PERFSVM id,
I get below error while connecting
Try turning the 'SET MSG IUCV' to 'WAKEUP +0 (IUCVMSG' .. I think this
gets WAKEUP ready - and also issues the SET MSG IUCV. The example under
'HELP WAKEUP' shows it done this way and I seem to recall needing to do it
in something I'd written.
Scott Rohling
On Thu, Aug 4, 2011 at 9:28 AM
conceivably be things stacked and needed by whatever calls you.
Better to do a 'MAKEBUF';buf=rc ... and then 'DROPBUF' buf ... then
you only drop the things in your 'own' stack.. and you aren't affected by
what may already be in the stack for whatever called you.
Scott Rohling
On Thu, Aug 4, 2011 at 9
not clear
in the doc - but I 'think' doing a RESET clears IUCV..
Scott Rohling
On Thu, Aug 4, 2011 at 11:37 AM, Frank M. Ramaekers
framaek...@ailife.comwrote:
** ** ** ** ** **
Good points. I’ve had the problem with MSG/SMSGs still in limbo and the
WAKEUP receives those first. Is there a way
usage at the Linux level - and not the physical disk level. The way
CMS uses disks, it makes sense -- but Linux can use them in a variety of
ways.
Scott Rohling
On Wed, Aug 3, 2011 at 6:30 PM, Ticona, Luis luis.tic...@nypd.org wrote:
Is there any tool that will allow me to display zVM DASD
Just a thought.. You could have a TIMES entry on VMUTIL that wakes up each
minute and does nothing.. (or something simple like Q TIME) -- the
timestamp of the TIMES file could be checked by AUDITOR -- if it hasn't been
updated in the last minute - then suspect it is down and recycle.
Scott
I always hate it when someone answers my last question and blows off the
first :-)
Scott Rohling
On Tue, Aug 2, 2011 at 3:19 PM, Marcy Cortes
marcy.d.cor...@wellsfargo.comwrote:
Here is one answer:
Q. What is the rationale behind installing the agent into /var?
Indications
I tried not to - but this made me laugh very loud...
Scott Rohling
On Tue, Aug 2, 2011 at 3:40 PM, Mark Post mp...@novell.com wrote:
On 8/2/2011 at 02:54 PM, David Boyes dbo...@sinenomine.net wrote:
How come Z hardware doesn't come with one of these? 8-)
Because it costs less than $100
I believe Bill's MONVIEW package has MONVU REXX:
http://www.vm.ibm.com/download/packages/descript.cgi?MONVIEW
Scott Rohling
On Mon, Aug 1, 2011 at 12:36 PM, Daniel Bewley daniel.bew...@gmail.comwrote:
Anyone out there who can guide me to a package for or including this? I
downloaded
' -- only when on the same lpar.
I think I've used up my parentheses quota..
Scott Rohling
Marcy. Sent from my BlackBerry.
- Original Message -
From: Davis, Larry (National VM/VSE Capability) [mailto:
larry.dav...@hp.com]
Sent: Friday, July 22, 2011 04:36 PM
To: IBMVM
to the current aggregate code.
That explains it - right? ;-)
Scott Rohling
On Wed, Jul 20, 2011 at 2:34 PM, Fran Hensler f...@zvm.sru.edu wrote:
What is line 78 supposed to do?
'Commit 0' /* hot to trot */
/Fran Hensler at Slippery Rock University of Pennsylvania USA for 48 years
mailto:f
.. Linux guests are
typically on an entirely different network, which may feed into a DMZ or
some kind of external network.
Not sure this helps - I'm sure others have input that might..
Scott Rohling
On Fri, Jul 15, 2011 at 5:53 AM, Lemuel Raciles Deza
lemuel.d...@riyadbank.com wrote
at the WUCFFAIL files on DIRMAINT 1DF to see what may have happened).
In then end if all looks well and you simply want DATAMOVE to release the
disks - you can do a DIRM GET/REPLACE on DATAMOVE and remove the MDISK
entries (and recycle DATAMOVE).. but this is usually a very last resort.
Scott Rohling
between them.
Any errors at all you are seeing would be good clues..
Scott Rohling
On Fri, Jul 15, 2011 at 1:43 PM, Tom Duerbusch
duerbus...@stlouiscity.comwrote:
I'm having a brain check.
I've enabled REXEC which is working well.
And I thing I enabled the server machines RXAGENT1 and RXAGENT2
with the
rexec client to accomplish a particular task.
re: agents ..as Alan says - we want to see the debug on the REXECD
server -- to try and see why agents aren't getting started. Hoping to
find a clue as to why they aren't.
Scott Rohling
On Fri, Jul 15, 2011 at 2:42 PM, Tom Duerbusch
duerbus
Which DTCPARMS are you updating?Is a 'lower level' one perhaps
overriding?The order is userid, nodeid, SYSTEM, and lastly IBM DTCPARMS
which should not be touched.
Scott Rohling
On Fri, Jul 15, 2011 at 3:11 PM, Tom Duerbusch
duerbus...@stlouiscity.comwrote:
OK, got it.
For REXECD
.. and this is a workaround.
Hope this helps.. please open a PMR!
Scott Rohling
On Fri, Jul 15, 2011 at 4:08 PM, Tom Duerbusch
duerbus...@stlouiscity.comwrote:
I only have two of them, SYSTEM and IBM. I'm updating SYSTEM.
It is on the D drive for user REXECD which is above the E drive where
With 512 byte blocks - this should be around 1TB ... though it depends on
the logical record length..
Glad you found a workaround.. just trying to understand limits. Seems
CMSDDR is likely the one with limits.
Scott Rohling
On Tue, Jul 12, 2011 at 7:48 AM, Smith, Wayne H Mr CTR DISA CDB12
I'd definitely give PIPEDDR a try! Splitting up a minidisk sounds like
extra steps you don't need to go through... If this is just a one time
thing - I guess do whatever works. PIPEDDR is a lot more flexible though..
Scott Rohling
On Tue, Jul 12, 2011 at 12:13 AM, Victor Ochoa Avila vhoa
Sorry -I meant that 512*2097152 = 1073741824 .. which is the
real block count when starting at 0
Exactly 1 gigabyte...
Scott Rohling
On Mon, Jul 11, 2011 at 4:21 PM, Scott Rohling scott.rohl...@gmail.comwrote:
I'm wondering if CMSDDR has some kind of internal limit of 1G.. I
Gentlemen -- I'm sure there's a better place to discuss hotels, bed bugs,
etc?
Scott Rohling
Maybe the workshop can provide a website to share such things.. I think
it's fine to announce these events here -- but all the attendance, lodging,
etc type details should be discussed elsewhere (IMHO).
Scott Rohling
On Tue, Jun 28, 2011 at 12:18 PM, Mike Walter mike.wal...@aonhewitt.comwrote
What's ME8PROX2? That seems to be taking a full 30 seconds to terminate..
Scott Rohling
On Thu, Jun 23, 2011 at 5:05 PM, Marcy Cortes marcy.d.cor...@wellsfargo.com
wrote:
The default is 30 seconds (Q SHUTDOWNTIME) for the CP's portion of the
shutdown process.
I recall hearing that is good
Rich - thanks for all the great input and assistance! Best of luck enjoying
your freedom...
And - you can always stay on the list with your personal email if you start
to miss us :-)
Best regards - Scott Rohling
On Wed, Jun 22, 2011 at 10:51 AM, Schuh, Richard rsc...@visa.com wrote:
After
Not 'penguin resuscitation' ? ;-)
Scott Rohling
On Wed, Jun 22, 2011 at 4:56 PM, Mark Post mp...@novell.com wrote:
On 6/22/2011 at 01:49 PM, Len Diegel ldie...@aol.com wrote:
I wanted to let everyone know that the VM Workshop Session Grid is now
available on the web site:
The sessions
on in this thread.
Scott Rohling
On Tue, Jun 21, 2011 at 6:57 AM, Michael MacIsaac mike...@us.ibm.comwrote:
Hi,
This thread has brought up a question in my mind (maybe it's a dumb one,
but I'll ask it anyway :))
Assumptions:
1) This is the default value for Operator_Consoles in the SYSTEM
the console statements. If you want the systems to IPL
identically then check out the Features statement in SYSTEM CONFIG. One
appears to have Auto_IPL WARM DRAIN -- the other doesn't and you get
HCPSED6013A
and have to respond to a prompt. Glad you got through it all!
Scott Rohling
my 2 cents: because most 009 consoles are defined as 3215 on z/VM guests.
(as for the ones that are listed.. ummm.. darts? :-)
Scott Rohling
On Tue, Jun 21, 2011 at 8:09 AM, David Boyes dbo...@sinenomine.net wrote:
1) This is the default value for Operator_Consoles in the SYSTEM
If you're not getting the prompt - you likely have Auto_IPL Warm or Auto_IPL
Force configured in your SYSTEM CONFIG... I use Auto_IPL FORCE on my test
systems so that they come up without the need for operator response.
Scott Rohling
On Mon, Jun 20, 2011 at 7:07 AM, Frank M. Ramaekers
framaek
It will likely fail, with a message that the target is not in the required
state and is the target of an existing flashcopy...until the background
copying finishes -- you won't be able to flash to the same target.
Scott Rohling
On Fri, Jun 17, 2011 at 11:06 AM, Alain Benveniste a.benveni
Sorry - looks like you need to use HELP CPQUERY FLASHC to display help...
Scott Rohling
On Fri, Jun 17, 2011 at 11:46 AM, Scott Rohling scott.rohl...@gmail.comwrote:
CP QUERY FLASHCOPY -- and there are several operands to query different
aspects of the persistent flashcopy relationship table
CP QUERY FLASHCOPY -- and there are several operands to query different
aspects of the persistent flashcopy relationship table.. I'm pretty sure
there are also some ICKDSF functions that do this also...
Anyway - HELP CPQUERY FLASHCOPY for more info on that..
Scott Rohling
On Fri, Jun 17, 2011
Alyce -- not sure what you mean, at least in the context of flashcopy.. ?
If you mean CLONEBKP, I believe it's making a copy of the spool volume(s),
so NSS/DCSS/etc would be preserved..
Scott Rohling
On Fri, Jun 17, 2011 at 5:20 PM, Austin, Alyce (CIV) aus...@nps.edu wrote:
What
key word 'option' .. it's pretty easy to code for doing either a
flashcopy or ddr, whether passed as an option, or even detected
automatically (try a flash and if it fails do the ddr).
Scott Rohling
On Thu, Jun 16, 2011 at 2:13 PM, Mark Post mp...@novell.com wrote:
On 6/16/2011 at 08:06
suggest it fall back to DDR if flashcopy fails -- as it will if you are
copying dasd that are on different subsystems..
Scott Rohling
On Thu, Jun 16, 2011 at 2:22 PM, Davis, Larry (National VM/VSE Capability)
larry.dav...@hp.com wrote:
I Believe Flashcopy uses DDR, if Flashcopy is not available
That's odd .. wait 1010 means 'no console available'.. any chance
someone was deactivating your lpar or trying to reload it?
Scott Rohling
On Tue, Jun 14, 2011 at 7:46 AM, Burton, Randy rbur...@bbandt.com wrote:
I'm curious if this error rings a bell with any of you. We of course
have
what the application data sample is in this
case. Are the records truly duplicates? (the whole record is
absolutely identical, displayable chars or not) Perhaps the
application data needs to be appended to come up with the entire
field?
Scott Rohling
On Thu, Jun 9, 2011 at 8:04 AM, Berry van
the number of CPU's
can influence, but I'm probably thinking of accounting records..
Scott Rohling
On Thu, Jun 9, 2011 at 11:56 AM, Berry van Sleeuwen
berry.vansleeu...@xs4all.nl wrote:
Hi Scott,
Yes, the records are identical. After a SORT UNIQUE the duplicate records
are discarded
Time yes: CP TERMINAL TIMESTAMP ON
Scott Rohling
On Tue, Jun 7, 2011 at 10:25 AM, Frank M. Ramaekers
framaek...@ailife.comwrote:
Isn’t there a way to force a time and/or date stamp for each line written
to the console?
Frank M. Ramaekers Jr.
Systems Programmer
MCP, MCP+I, MCSE
REXXDATE
did date calculations/conversion - but I need to dig up my old code. If I
can find out more I will post, but would consider converting to DATE() and
some REXX code to avoid reliance on the module (which I doubt is supported).
Scott Rohling
On Mon, Jun 6, 2011 at 10:39 AM, Schuh, Richard rsc
Take a look at this thread:
http://www.mail-archive.com/ibmvm@listserv.uark.edu/msg34708.html
http://www.mail-archive.com/ibmvm@listserv.uark.edu/msg34708.htmlScott
Rohling
On Wed, Jun 1, 2011 at 11:29 AM, Davis, Larry (National VM/VSE Capability)
larry.dav...@hp.com wrote:
We received this
Just a guess, but have you checked MTU sizes? Are you using a VSWITCH for
the guests or dedicated OSA?
Scott Rohling
On Wed, May 4, 2011 at 5:15 PM, Bhemidhi, Ashwin ashw...@ti.com wrote:
Hello all,
Recently we started noticing on few of our Linux guest that Ethernet frames
were being
RR
If it works -- then no worries.. the password is being ignored. if not -
let us know the failure and I can suggest what needs setting up in RACF.
Scott Rohling
On Fri, Apr 22, 2011 at 1:02 PM, Martin, Terry R. (CMS/CTR) (CTR)
terry.mar...@cms.hhs.gov wrote:
Hi
Here is one I found
the password -- that should be safe.
Good catch, Rob ...
Scott Rohling
On Fri, Apr 22, 2011 at 1:59 PM, Rob van der Heij rvdh...@gmail.com wrote:
On Fri, Apr 22, 2011 at 9:24 PM, Scott Rohling scott.rohl...@gmail.com
wrote:
Hi Terry - If RACF is installed and controlling links
if:
- The Universal Access (UACC) for LNXADMIN 191 is READ
or
- The authorization list contains all the Linux guests with READ access
or
- The authorization list contains a group with READ access to which all
Linux guests belong (and LIST OF GROUPS ACCESS CHECKING is active in RACF)
Scott Rohling
-- and all
the guests will execute the PROFILE EXEC on LNXAMDIN 191. I always hate
seeing individual 191 disks for Linux guests :-(
Scott Rohling
On Fri, Apr 22, 2011 at 3:16 PM, Rob van der Heij rvdh...@gmail.com wrote:
And when you go make these changes, consider putting the LINK
statements
'
on the LNXADMIN 391 for guests that have special needs.
Hope this sample helps... I'm sure others have been pretty creative in this
area and have lots of ideas!
Scott Rohling
On Fri, Apr 22, 2011 at 6:43 PM, Martin, Terry R. (CMS/CTR) (CTR)
terry.mar...@cms.hhs.gov wrote:
Thanks Scott. I use
(security/integrity and not using
more power than required) is very valid.
Scott Rohling
p.s. In the case of the original post - which seems to be the need to swap
out a volume currently used by guests for minidisks - SECUSER/SEND/FOR is
the only way (short of recycling the guest) to accomplish
.. (the * confuses bash so specify the user).
If this is a Linux guest -- then the 191 isn't accessed any more (Linux is
running).. so no need to reaccess.
Scott Rohling
On Wed, Apr 20, 2011 at 8:21 AM, Martin, Terry R. (CMS/CTR) (CTR)
terry.mar...@cms.hhs.gov wrote:
Hi
I have a copy of the DASD
to the guest's CP - not the guest OS..
Also note: You likely want to issue SET SECUSER user RESET shortly after
issuing the SEND CP command so that you don't stay secondary user for
everyone you do this to.
Scott Rohling
On Wed, Apr 20, 2011 at 2:13 PM, Martin, Terry R. (CMS/CTR) (CTR)
terry.mar
you do with them. I suppose you could consider a
SHUTDOWN command an abuse of power as well... ;-)
Scott Rohling
On Wed, Apr 20, 2011 at 3:22 PM, Tom Huegel tehue...@gmail.com wrote:
If that is the rule, then we don't need SECUSER or FOR, or when would you
use them?? Just courious.
On Wed
Since you are overcommitting memory -- how much paging space do you have?
Scott Rohling
On Wed, Apr 20, 2011 at 5:32 PM, Carlos Bodra - Pessoal cbo...@terra.com.br
wrote:
q stor
STORAGE = 48G CONFIGURED = 48G INC = 128M STANDBY = 0 RESERVED = 0
Ready; T=0.01/0.01 20:33:09
No xstore
Does VMLINK with the NONAMES option cause the same behavior? VMLINK user
disk (NON
I'm not sure about in this case, but NAMES files can sometimes create
problems when using VMLINK - so I tend to use NONames
Scott Rohling
On Tue, Apr 19, 2011 at 2:08 PM, Alain Benveniste a.benveni
the directory correctly.
Scott Rohling
On Mon, Apr 11, 2011 at 12:33 PM, Martin, Terry R. (CMS/CTR) (CTR)
terry.mar...@cms.hhs.gov wrote:
Hi
I think I may have screwed up here. I had to make multiple changes to my
Directory so I did the following:
I did a DIRM USER WITHPASS to get
I would try a DIRM RLDE first... that should rebuild the VCONTROL files...
I'm 'pretty' sure it erases them all first --- but if not - then yes, you
can erase them, though I would report it as a bug and leave one around to be
able to recreate.
Scott Rohling
On Fri, Apr 8, 2011 at 9:20 AM
And you don't have to take DIRMAINT down to erase files--you can issue
DIRM CMS ERASE xxx VCONTROL E (don't have a system handy - I think 1DF is
accessed as E -- otherwise do a DIRM CMS Q DISK or DIRM CMS LISTFILE *
VCONTROL * to figure it out)
Scott Rohling
On Fri, Apr 8, 2011 at 9:36 AM
WAKEUP will stack the command (or text or whatever is there) -- not execute
it.. you need code around it to pull it off the stack and execute it..
Scott Rohling
On Fri, Apr 8, 2011 at 9:09 AM, Billy Bingham
billy.bingham...@suddenlink.net wrote:
Hello,
I'm trying to understand WAKEUP. I
it all straight for sure!
Scott Rohling
On Tue, Apr 5, 2011 at 4:43 PM, Karl Huf k...@ntrs.com wrote:
I could have sworn I had seen something about this in a presentation
regarding best practices for configuring z/OS z/VM LPAR's that share
the same DASD subsystems but now that I need it, no joy
done a survey or anything :) Usually, for ease of migration and
support - you stick with the distro you use on the distributed platforms..
Scott Rohling
On Mon, Apr 4, 2011 at 8:43 AM, Hughes, Jim jim.hug...@doit.nh.gov wrote:
Is there a free evaluation copy of Linux for z/VM? There are rumors
Well -- VMPPG5 is not VMPAG5.. relabel 100C to VMPPG5 and maybe it will
go better ;-)
Scott Rohling
On Tue, Mar 29, 2011 at 7:19 AM, Bauer, Bobby (NIH/CIT) [E]
baue...@mail.nih.gov wrote:
and now for the rest of the email
q cpowned
Slot Vol-ID Rdev Type Status
1 VMPRES
You can set the console addresses in SYSTEM CONFIG that z/VM should use...
see the 'Operator_Consoles' variable. SET IPLPARMS is for a subsequent
SHUTDOWN RESTART .. which it doesn't sound like you did from the way you
worded it?
Scott Rohling
On Sun, Mar 27, 2011 at 12:50 PM, Phillip Gramly
about it
again)
Scott Rohling
On Sun, Mar 20, 2011 at 7:02 AM, Kris Buelens kris.buel...@gmail.comwrote:
You've got the model from Q CPUID? (a z10 BC is a 2098, an EC is a 2097)
No hex 41 somewhere? SET OUTPUT 41 _ can make those visible.
The DIRMSAT has no CPUID statement in its directory
rant. IMHO.
Let's just forgive, forget and move on..
Scott Rohling
On Tue, Mar 15, 2011 at 1:59 PM, IBMVM Moderator
modera...@gizmoworks.comwrote:
And now, a word from our moderator...
Ladies, Gentlemen, dearest colleagues:
Allow me, if I may, to offer a gentle nudge back toward
A HELP LISTDIR shows this:
DMS1240E You are not authorized to connect to file pool filepoolid (RC=76)
Not your message, but the RC seems to indicate that TCPMAINT isn't
authorized to the filepool...
Scott Rohling
On Thu, Mar 10, 2011 at 7:11 AM, Willimann, Alan (NIH/CIT) [C]
alan.willim
It comes with the z/VM license .. yes. No extra money needed if you
enable it and use it. :-)We WANT you to use it - please ?
Scott Rohling
On Wed, Mar 9, 2011 at 7:32 AM, Hughes, Jim jim.hug...@doit.nh.gov wrote:
Is the VM Performance Toolkit a free product from IBM
Oops -- I guess this was wishful thinking. There apparently is an
additional license fee (nominal)..
Sorry to blurt out a wrong answer without checking the facts :-( hangs
head in shame
Scott Rohling
On Wed, Mar 9, 2011 at 7:35 AM, Scott Rohling scott.rohl...@gmail.comwrote:
It comes
Just call me the straight man, Barton... still chewing on my foot.;-)
Scott Rohling
On Wed, Mar 9, 2011 at 8:13 AM, Barton Robinson
bar...@vm1.velocity-software.com wrote:
I might as well take this opportunity. Velocity Software has a new
offering, for installations just getting
password..
This should give them the audit trail they need - and keeps passwords
private, etc.
Scott Rohling
On Wed, Mar 9, 2011 at 9:28 AM, Vogtmann, Wallace B wvogt...@tcfbank.comwrote:
We're new to zVM. Have the system operational with standard IBM supplied
User/Guest definitions. For example
Ah - and maybe RAC SETROPTS NORACLIST(SURROGAT) unless you like having to do
a REFRESH whenever SURROGAT definitions are fiddled with. Thanks, Bruce!
;-)
Scott Rohling
On Wed, Mar 9, 2011 at 9:35 AM, Bruce Hayden bjhay...@gmail.com wrote:
And of course:
RAC SETROPTS CLASSACT(SURROGAT
that groups other than the
default group are checked for permissions.
Scott Rohling
On Wed, Mar 9, 2011 at 11:30 AM, Kris Buelens kris.buel...@gmail.comwrote:
At my former customer, we created several RACF groups. To name a few:
LBSYST to control LOGONBY to various users by system programmers
If you want help - you're gonna have to introduce yourself...
Scott Rohling
On Mar 2, 2011 12:22pm, new zvm new2...@hotmail.com wrote:
I'm relative new to z/VM. I have a couple of z/VM LPARs runing Linux
guests and have more coming.
What I'm wondering is this:
What z/VM metrics
guest so it happens when your guest is
logged in.
Scott Rohling
On Fri, Feb 25, 2011 at 8:35 AM, Sherry Everhart severh...@maccnet.comwrote:
#CP Q V DASD
DASD 0190 3390 520RES R/O107 CYL ON DASD 0F00 SUBCHANNEL = 0008
DASD 0191 3390 EM0F05 R/W 10 CYL ON DASD 0F05 SUBCHANNEL
line.
Scott Rohling
On Tue, Feb 22, 2011 at 2:48 PM, Sherry Everhart severh...@maccnet.comwrote:
I have copied all of the dvd files to a subdirectory on the the FTP server
as recommended in From an FTP Server Directory (p 98 of the Guide for
Automated Installation and Service).
So can anyone
one thought - does the password (-p) end with ! by any chance?
Scott Rohling
On Tue, Feb 22, 2011 at 3:23 PM, Scott Rohling scott.rohl...@gmail.comwrote:
It looks like there must be a stage separator before -d - even though you
aren't showing one. Or maybe it's not being typed as one long
They aren't needed after the install - so I never saw the point of setting
them up in the directory unless you don't use TDISK space... also as I
recall - none are bigger than a few hundred cylinders..
Scott Rohling
On Thu, Feb 17, 2011 at 12:36 PM, Sherry Everhart severh...@maccnet.comwrote
under a Linux workstation -- and ftp to that. I've never actually tried a
minidisk install myself
Scott Rohling
On Thu, Feb 17, 2011 at 12:41 PM, Scott Rohling scott.rohl...@gmail.comwrote:
You're not installing from a VM minidisk - you're installing from a DVD ..
no? So you can ignore
CP VARY ON address ??
Scott Rohling
On Thu, Feb 17, 2011 at 12:45 PM, Steve Perez sspe...@corelogic.com wrote:
Hello Listers,
If I have DEVICE addresses in the SYSTEM CONFIG file to be OFFLINE_AT_IPL,
is there to dynamically have those devices varied online or override at
IPL of a zVM 5.4
to create an SFS
filepool (which will consist of at least 2 3390-3) - and then upload the dvd
contents to it using terminal emulation file xfer.
Having TCPIP and using FTP is by far the simplest way to go if all you have
is 3390-3 - setting up SFS isn't trivial for a beginner.
Scott Rohling
On Thu
' that all guests
receive -- and I suppose if a message can be issued at midnight - then so
can other things. shrug I still think it belongs in a CMS guest.. so
there. :-)
Scott Rohling
p.s. You can certainly use a Linux guest for automation and scheduling as
well -- I don't mean to exclude
Q SYS 104
Scott Rohling
On Thu, Feb 10, 2011 at 1:03 PM, Frank M. Ramaekers
framaek...@ailife.comwrote:
Isn’t there a command that will tell me who (what) are the following 104?
Q 6F8
DASD 06F8 CP OWNED 540RES 104
Frank M. Ramaekers Jr.
Systems Programmer
MCP, MCP+I
oops -- :-)Q SYS 6F8
Scott Rohling
On Thu, Feb 10, 2011 at 1:11 PM, Scott Rohling scott.rohl...@gmail.comwrote:
Q SYS 104
Scott Rohling
On Thu, Feb 10, 2011 at 1:03 PM, Frank M. Ramaekers framaek...@ailife.com
wrote:
Isn’t there a command that will tell me who (what
I don't understand why you say the install can't be done on something
greater than a mod 9 ... I'm pretty sure it can - if you don't mind empty
space. Cylinder 0 is sufficient.. maybe you are thinking of XLINK bit
maps?
Scott Rohling
On Wed, Feb 9, 2011 at 8:32 AM, Tom Duerbusch duerbus
For DIRMAINT no -- for RACF - you 'will' have to IPL to at some point for
RACF to act as an ESM -- but not to enable and install the code. The
program directory for these products is the best place to see the steps
necessary for installation.
Scott Rohling
On Tue, Feb 8, 2011 at 11:00 AM
Yes - it is assumed that 3 devices are used.. so 9404-9406 will be used,
with the definitions you show.
Scott Rohling
On Mon, Feb 7, 2011 at 4:02 PM, George Henke/NYLIC
george_he...@newyorklife.com wrote:
tyvm, Paul and Marcy
In my VSWITCH definition, rdev is changing from 9004 to 9404
You use the format of '.Pn'to define the port.. for example:
A00.P1..
The default is port 0 (A00.P0)...
Scott Rohling
On Tue, Feb 1, 2011 at 12:45 PM, George Henke/NYLIC
george_he...@newyorklife.com wrote:
Marcy:
How did you change your vswitch definition for PO1?
Chuckie
Should have explained, if it wasn't clear: .Pn Where is the
OSA address and Pn is the port number (P0 or P1)..
On Tue, Feb 1, 2011 at 12:54 PM, Scott Rohling scott.rohl...@gmail.comwrote:
You use the format of '.Pn'to define the port.. for example:
A00.P1
and explanations..
Scott Rohling
2011/1/31 Rogério Soares rogerio.soa...@gmail.com
guys, i have tryed set up a vswitch on ip routing mode to use port group,
but i can't i get group paramenter invalid...
when i set up vswtich to ETHERNET, and make SET VSWITCH VSWSVC01 GROUP
GRPSRV01 , i receive
I would be concerned about things like real addresses -- if any of them are
changing -- you'll want to update SYSTEM CONFIG RDEVs, online/offline
devices, etc - also console definitions if they'll change. You may do some
of these things in AUTOLOG1 too...
Scott Rohling
On Mon, Jan 31, 2011
VMLINK MAINT 193
SAMPNSS CMS
Scott Rohling
On Wed, Jan 26, 2011 at 2:14 PM, RPN01 nix.rob...@mayo.edu wrote:
I wanted to generate a new CMS segment to pick up a changed S minidisk,
and suddenly couldn’t remember the exec which generates the CMS shared
segment skeleton. (The auto accident
...
Scott Rohling
On Wed, Jan 26, 2011 at 2:37 PM, Bob Bates robert.ba...@wellsfargo.comwrote:
Hi folks,
I have been trying to get spool volumes offline. All are gone
except one and it has the HCPDUMP file allocated to it (OPEN –
OPERATNS).Volume has been drained but the file got
I believe you need to grant access to the vlan as well:set vswitch vsw3
grant user vlan 12
Scott Rohling
On Tue, Jan 25, 2011 at 9:14 AM, louis.gai...@its.ms.gov wrote:
I am a newbie
I am trying to create a vswitch with vlan capablitites I am using the
osa-express implementatiion guide
Duh -never mind - I see you did in the access list... sorry.
Scott Rohling
On Tue, Jan 25, 2011 at 9:31 AM, Scott Rohling scott.rohl...@gmail.comwrote:
I believe you need to grant access to the vlan as well:set vswitch
vsw3 grant user vlan 12
Scott Rohling
On Tue, Jan 25, 2011 at 9
with no errors.. but transmitting (TX) not so many and with errors. I'm
thinking this might be due to trunk access or maybe routing? Not sure..
Scott Rohling
On Tue, Jan 25, 2011 at 2:23 PM, louis.gai...@its.ms.gov wrote:
I detached my switch
defined it again
define vswitch vsw3 rdev fa00 eth
for
it to know what to goes over that interface..
Is this vswitch really supposed to use the same subnet as your 'other'
vswitch? (the one that Linux sees as eth0)? And/or is netmasking really
supposed to be 255.255.255.0?
Scott Rohling
On Tue, Jan 25, 2011 at 3:47 PM, louis.gai...@its.ms.gov wrote
on
the surface - I don't see how anything goes out over vlan12 - but I probably
don't understand the setup well enough to give solid advice. Sorry - meant
to help :)
Scott Rohling
On Tue, Jan 25, 2011 at 5:18 PM, Scott Rohling scott.rohl...@gmail.comwrote:
So - nothing is being routed except over
1 - 100 of 512 matches
Mail list logo
