Hi
Check to see if the internal QT member is set to streaming
in which case it will most likely ignore the cache and
stream from the server.
Sincerely
Mark R. Jonkman
[To remove yourself from this list, or to change to digest mode, go to
http://www.penworks.com/LUJ/lingo-l.cgi To post message
You know, that's what it is - thanks Mark; I couldn't figure out what was
a'happening.
On Fri, 24 Aug 2001, Mark R. Jonkman wrote:
> Hi
>
> Check to see if the internal QT member is set to streaming
> in which case it will most likely ignore the cache and
> stream from the server.
>
> Sincere
Asked this the other day and got no response --
I'm not new at all to netlingo stuff, and it was always my understanding
that preloading a file would bring it to the user's cache, whereas anotehr
request for the same file would pull from the local cached file rather
than the remote one, correct
How do I make the camera in a 3d world imported from Lightwave
to 'play' an animation in Director 8.5??
Luiz Gustavo Castelan Póvoas
[To remove yourself from this list, or to change to digest mode, go to
http://www.penworks.com/LUJ/lingo-l.cgi To post messages to the list,
email [EM
>
> For another approach, see my article at Director Online:
>
>http://www.director-online.com/accessArticle2.cfm?id=340
>
> Basic idea: Have a generic button behavior that you attach to any
> and all buttons. When the button is clicked it does a sendSprite to
> the current sprite number cal
Very cool - thanks Karina!
[To remove yourself from this list, or to change to digest mode, go to
http://www.penworks.com/LUJ/lingo-l.cgi To post messages to the list,
email [EMAIL PROTECTED] (Problems, email [EMAIL PROTECTED])
Lingo-L is for learning and helping with programming Lingo. Than
Irv
At 9:59 AM -0500 8/21/01, [EMAIL PROTECTED] wrote:
>Just got in and thought I'd post the question before I attempted it
>myself.
>
>I've got a bunch of buttons that react the same (ie rollover, down, blah
>blah blah) but on mousedown should all call a different handl
> I was thinking that I create one behavior asking for the text of the
> handler to call, then do a sendallsprites(do(stringentered))
>
> Would this be the way to go or would it be
> sendallsprites(symbol(textentered))
If you're using a gpdl for this, all you need to do is define the format as
#s
Just got in and thought I'd post the question before I attempted it
myself.
I've got a bunch of buttons that react the same (ie rollover, down, blah
blah blah) but on mousedown should all call a different handler.
I was thinking that I create one behavior asking for the text of the
Basic MIAW question: I can't find in the manual how to pause (go the frame
?) and tell the MIAW to continue without using the "pause" and "continue"
commands. Are "pause" and "continue" no longer support
On 8/9/01 at 2:12 PM, Robert Wingate shared the following:
> > Either one is better than trying to code MUI...what a headache!
>
>Aw, come on. MUI is really straightforward, and it pretty much does what
>you tell it to. The current shockwave-unsafety is the biggest headache!
>This article makes i
> Either one is better than trying to code MUI...what a headache!
Aw, come on. MUI is really straightforward, and it pretty much does what
you tell it to. The current shockwave-unsafety is the biggest headache!
This article makes it easy:
http://www.director-online.com/accessArticle.cfm?id=888
On 8/8/01 at 4:08 PM, Al Hospers shared the following:
>MUI Maker enables you to visually design a dialog and then generates
>the Lingo code for the dialog you create. You can place, resize and
>position your choice of buttons, dropdown menus, sliders, checkboxes,
>text fields and labels. One clic
Hello all.
I am trying to use image.fill(rect,parameterlist),
BUT
if I set the shapeType to either #oval or #roundRect I can see it in the
bitmap.image that it is filling but not on stage.
any clues?
thx,
b
Brian Douglas (:ub)
> I'm looking for some info about the MUI Xtra, it's the first
> time I use it
> and I'm not sure if what I want to do Is possible... What I
> have to do is an
> alert box with 4 radio buttons in it, when the user choose
> one of the option
> it send the result in a variable... Is it possible? If
Hi Simon
head on over to Bruce Epstein's site:
http://www.zeusProd.com
and take a look around for an "extra" chapter that never
made it into his books DiaN and LiaN. He has an excellent
reference there that covers the MUI Xtra and its "Minimally
Understandable Interface" ;p
actually you'll find i
Hi all !
I'm looking for some info about the MUI Xtra, it's the first time I use it
and I'm not sure if what I want to do Is possible... What I have to do is an
alert box with 4 radio buttons in it, when the user choose one of the option
it send the result in a variable... Is it possible? If anyo
BuddyAPI: http://www.mods.com.au/budapi/
If you do not have the Buddy API Xtra yet, seek it out -- or seek
other kinds of "professional help" .
>Good morning!
>
>Is there a way to open a PDF through a projector(runs acrobat and opens the
>file w/ the projector in the background), rather than o
> Is there a way to open a PDF through a projector(runs acrobat
> and opens the
> file w/ the projector in the background), rather than opening
> within the
> projector by using the PDF Xtra?
if you are saying that you don't want to use an Xtra to "embed" your
PDF and just want it to open on top
Good morning!
Is there a way to open a PDF through a projector(runs acrobat and opens the
file w/ the projector in the background), rather than opening within the
projector by using the PDF Xtra?
thanks
Brian
[To remove yourself from this list, or to change to digest mode, go to
http://www.
But is the older pdf xtra compatible with 5? Doesn't seem to be - at least
on mac; on windows you can have a workaround with includeing a 4.0 reader
on the cd.
On Mon, 30 Jul 2001, Dominic Villiard wrote:
> yes it's compatible
>
[To remove yourself from this list, or to change to digest mode
yes it's compatible
- Original Message -
From: <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, July 31, 2001 4:01 PM
Subject: pdf xtra question...
>
> What's the new features with the 2.0 version? Is it compatible with
> Acrobat 5 (1 doesn&#x
What's the new features with the 2.0 version? Is it compatible with
Acrobat 5 (1 doesn't seem to be)can we still use 1 with acrobat reader
4 on a cd?
[To remove yourself from this list, or to change to digest mode, go to
http://www.penworks.com/LUJ/lingo-l.cgi To post messages to t
> I use it in 8.5 with no problem--at least on Windows. Haven't
> tried the Mac yet.
>
> the debugPlaybackEnabled does need to be set to true for 8.5. My
> projector is called "Get Set.exe" and I have a
> "Get Set.ini" file with this line in it:
>
> MessageWindow=1
>
> Then I put this in my prepar
>You may be right - I am referencing D8 and earlier - to be honest I
>haven't tried this in D8.5...
I use it in 8.5 with no problem--at least on Windows. Haven't tried the Mac
yet.
the debugPlaybackEnabled does need to be set to true for 8.5. My projector
is called "Get Set.exe" and I have a
IL PROTECTED]]On
>Behalf Of Tab Julius
>Sent: Wednesday, July 25, 2001 12:54 PM
>To: [EMAIL PROTECTED]; '[EMAIL PROTECTED]'
>Subject: Re: message window question
>
>
>
>Sure. You will need a .INI file of the same name as the projector in the
>same folder as the
-Original Message-
>From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On
>Behalf Of Tab Julius
>Sent: Wednesday, July 25, 2001 12:54 PM
>To: [EMAIL PROTECTED]; '[EMAIL PROTECTED]'
>Subject: Re: message window question
>
>
>
>Sure. You will need a .
Folks...
I'd like your advice on a small design issue:
I'm working on a director app that requires the
user to select a large number of HTML files and
do a little bit of organization with those files:
the usual stuff: add, remove, move up, move down
before clicking "Done" to send all of the file
sn't seem to
be working for me either.
!?
Josie
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On
Behalf Of Tab Julius
Sent: Wednesday, July 25, 2001 12:54 PM
To: [EMAIL PROTECTED]; '[EMAIL PROTECTED]'
Subject: Re: message window question
Sure. You
Are you sure that you've got a frame script in place to do looping?
(and it's not just working in auth because of the Control Panel's
loop button...)
* a long shot, but I've done this to myself "
-Buzz
At 12:21 PM -0400 7/25/01, Allard, Simon wrote:
>Hi all,
>
>Is it possible to create the "me
Hi
>
> Sure. You will need a .INI file of the same name as the projector in
> the
> same folder as the projector.
This is true of director 7 and 8 but not of director 8.5.. if you happen to
be using D8.5 then you will need to add the line
the debugPlaybackEnabled = true
to some convenient place
>Sure. You will need a .INI file of the same name as the projector in the
>same folder as the projector.
And, if you're running Director 8.5, you need to set the
debugPlaybackEnabled property to TRUE.
Cordially,
Kerry Thompson
[To remove yourself from this list, or to change to digest mo
Sure. You will need a .INI file of the same name as the projector in the
same folder as the projector.
So, if your projector is SIMON.EXE then you will need (if you don't have
one already) a file called SIMON.INI
This is a text file, and you can edit it with Notepad (or SimpleText if
Mac).
---Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On
Behalf Of Allard, Simon
Sent: Wednesday, July 25, 2001 12:21 PM
To: '[EMAIL PROTECTED]'
Subject: message window question
Hi all,
Is it possible to create the "message window" of Director for a projec
Hi all,
Is it possible to create the "message window" of Director for a projector.
My project work fine in Director but when I create the projector it quit for
no reason, so I want to find out where the problem is.
Thanx
[To remove yourself from this list, or to change to digest mode, go to
ht
>Global functions exist in movie scripts.
>
>Sorry, you couldn't declare them in Lingo.ini (if only, unfortunately
>there'd be a security problem). However you could reference external
>casts and link them in dynamically or import the script text.
>[snip]
>- Tab
>
>
>At 11:35 AM 7/25/01 +1000,
hi,
How do i make a global (or would it be public? i'm not sure of terminology)
function in director? As i'd prefer to encapulate often typed code. Could
i store these functions in lingo.ini for quick mods?
Cheers
Brendon
[To remove yourself from this list, or to change to digest mode, go t
Global functions exist in movie scripts.
Sorry, you couldn't declare them in Lingo.ini (if only, unfortunately
there'd be a security problem). However you could reference external casts
and link them in dynamically or import the script text.
So to make a movie script, which is a script whose
Actually, I want to clarify... I said "per program" and misspoke. I meant,
per ".DIR". If you have MIAWs (Movie In A Window) open, they can hold
their own handlers.
- Tab
At 09:38 PM 7/24/01 -0400, Tab Julius wrote:
>Global functions exist in movie scripts.
>
>Sorry, you couldn't declare
If your STOP button sets whereto = "Go Loop", you could just move
this line to the top of the case statement.
Basically, since you want your STOP button's condition to rule, it
needs to be the first condition of your case statement.
- I added a new case "I Stopped" that will keep you on the sa
I have a small problem & I hoped someone out there can help.
I have an audio player with multiple tracks, that when the song is done
playing, it automatically goes to the next frame with the new track. (See
code below)
The problem is, is that when the song is done, it releases the exitFrame
loop
Grimm,
A director question, since I recall you responded to my last printomatic
inquiry.
Do you know if it is possible to appendFile a .txt file, so I can store all
my text externally?
Brian Douglas (:ub)
I refuse
then the answer again is that there used to be a limit (pre d7), but
prolly not anymore.
the nightboy wrote:
>
> >a limit to the number of cast members. no i don't think so. until you
> >run out of disc space.
> >
>
> actually, a limit to the number of lines of code for a given #script cast
> m
>a limit to the number of cast members. no i don't think so. until you
>run out of disc space.
>
actually, a limit to the number of lines of code for a given #script cast
member.
Brian Douglas (:ub)
I refuse to use
a limit to the number of cast members. no i don't think so. until you
run out of disc space.
the nightboy wrote:
>
> >Here is a little question:
> >
> >does anyone know if there is a line limit to scripts?
>
> sorry -- #script cast me
>Here is a little question:
>
>does anyone know if there is a line limit to scripts?
sorry -- #script cast members.
Brian Douglas (:ub)
I refuse to use code as a method to describe myself. instead, I
thx
Brian Douglas (:ub)
I refuse to use code as a method to describe myself. instead, I will use
noises:
rant = [teewart/blamberDOH!!!/crrrleftnk/erop]
http://www.imaginarystudio.com --check it out!
[To remov
the nightboy wrote:
>
> Here is a little question:
>
> does anyone know if there is a line limit to scripts?
there used to be. i don't think there is as of d8. i'm sure someone will
correct me if i'm being unclear though... (kidding!!)
>
> also can you
> Here is a little question:
>
> does anyone know if there is a line limit to scripts?
Use to be a size limit pre D6.5 (i think) but I don't belive there is one
now (could be wrong though). Anyone else know?
>
> also can you script on the fly, a #script cast member to be eit
Here is a little question:
does anyone know if there is a line limit to scripts?
also can you script on the fly, a #script cast member to be either an
behavior or movie script?
tia
Brian Douglas (:ub)
AS/L/JS
Take a look in the LD at framesToHMS and HMSToFrames - should be what you're
after...
Dave
[To remove yourself from this list, or to change to digest mode, go to
http://www.penworks.com/LUJ/lingo-l.cgi To post messages to the list,
email [EMAIL PROTECTED] (Problems, email [EMAIL PROTECTED])
L
Is there a way to check Frames, not movieTime, but actual frame numbers of
digital Video?
tia
Brian Douglas (:ub)
AS/L/JS
6'2" 170lbs. eyes:bwn hair:bwn nose hair:well groomed
Imaginary Studio
212-239-4393 x 204
>no, but try fireworks xtra instead...is fireworks applescriptable?
>
>
Do you know if files created in fireworks are acceptable by medialab
effector sets?
Brian Douglas (:ub)
AS/L/JS
6'2" 170lbs. eyes:bwn hair:bwn
no, but try fireworks xtra instead...is fireworks applescriptable?
[To remove yourself from this list, or to change to digest mode, go to
http://www.penworks.com/LUJ/lingo-l.cgi To post messages to the list,
email [EMAIL PROTECTED] (Problems, email [EMAIL PROTECTED])
Lingo-L is for learning an
>OK its been a long day here so what is "alphamania" I look it up in my
>pocket dictionary and it is not in there.
>
>Fred
>
>Fred Westermeyer
>Slot Graphics
>[EMAIL PROTECTED]
>Grand Casino Biloxi
>265 Beach Boulevard
>Biloxi, MS 39530
>1-800-WIN-2-WIN ext.1592
>
>
It is part of a series of xtr
OK its been a long day here so what is "alphamania" I look it up in my pocket
dictionary and it is not in there.
Fred
Fred Westermeyer
Slot Graphics
[EMAIL PROTECTED]
Grand Casino Biloxi
265 Beach Boulevard
Biloxi, MS 39530
1-800-WIN-2-WIN ext.1592
[To remove yourself from this list, or to ch
alphamania question:
IS there anyone out there that has used this, and if so is there a way to
apply alphamania to files located externally. The project that I am working
on will be constanly be updating a directory of images and I need to apply
alphamania to any of these new files.
tia,
b
the lingo part should just be:
member("whatever").filename=@movies&getpathdelimiter()&"whatever.mov"
where getpathdelimiter() is just a script that figures out the machine
type and returns ":" or "/"
thanks again.
paul
phastings wrote:
>
> i'm having a big problem that resembles the same
i'm having a big problem that resembles the same problem that has been
being discussed a little about the quicktime paths. i am taking a
project that had already been completed and reburning it. everything
works fine on the mac side but the pc side is looking for the casts,
movie files, and
x27;t remember the url though.
>
> Help this helps,
> Lee Goldschmidt
>
>
> > Hi all,
> >
> > sorry for the OT-ness of this but I've had to convert a small
> DIR file to a
> > Flash equivalent. Question: Does anybody know if Flash has an
> equivalent to
&
No ,
though I an sure that someone on flashcoders has built it's equivalent by now.
I will look around.
Brian Douglas (:ub)
AS/L/JS
6'2" 170lbs. eyes:bwn hair:bwn nose hair:well groomed
Imaginary Studio
212-239
ted a document that maps
actionscript to lingo. I don't remember the url though.
Help this helps,
Lee Goldschmidt
> Hi all,
>
> sorry for the OT-ness of this but I've had to convert a small DIR file to a
> Flash equivalent. Question: Does anybody know if Flash has an equival
Hi all,
sorry for the OT-ness of this but I've had to convert a small DIR file to a
Flash equivalent. Question: Does anybody know if Flash has an equivalent to
the CASE statement in Director? I can't seem to find it anywhere.
TIA
Leon
[To remove yourself from this list, or to
Buddy's baOpenFile() opens a file in the appropriate app (it finds the app
for you). All you need is a path and a file type. One function, therefore,
free.
-Kurt
[To remove yourself from this list, or to change to digest mode, go to
http://www.penworks.com/LUJ/lingo-l.cgi To post messages to t
> Just I am wondering if you have the answer for this little problem:
>
> I know that director can control if any apps exist on the
> user hard drive
> which is necessary to open a pdf or mov file, through any
> Xtra like IOXtra.
>
> Can you tell me where can I donwload it?, Is there another
> sim
Hi there!
Just I am wondering if you have the answer for this little problem:
I know that director can control if any apps exist on the user hard drive
which is necessary to open a pdf or mov file, through any Xtra like IOXtra.
Can you tell me where can I donwload it?, Is there another similar
I'm curious
does this command also pause the ticks?
I need this functionality for a countdown timer I have been programming for
a client.
Andy
- Original Message -
From: "R. Bhakti Klein" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, June 29, 2001
howdy comrades-
as we all know, pause and continue are supposedly no longer supported.
go the frame and go the frame+ 1 are recommended instead.
but we also all know that they are not the same thing.
it looks like pause and continue do still work in d8. sound pauses and
restarts where it was le
ROTECTED]]On
> Behalf Of Mark A. Boyd
> Sent: 25. kesakuuta 2001 15:22
> To: [EMAIL PROTECTED]
> Subject: Re: Buddy API Question
>
>
> At 11:52 23/06/2001, Tom Richardson wrote:
> >Hey Mark,
> >
> >I am testing first, and it comes back ok
> >but after doing the
At 2:31 PM -0700 6/23/01, Colin Kettenacker wrote:
>
>For more information may I suggest Irv Kalb's online reference:
>
>http://www.furrypants.com/loope/
>
Thanks for pointing giving out the URL, Colin. There's an intro to
using "me" in chapter 3, and much more detail in chapter 6. Enjoy.
Irv
if you are accessing something from the same URL as where the
Shockwave application is being hosted, you should not get this
message.
Al Hospers
CamberSoft, Inc.
alcambersoftcom
http://www.cambersoft.com
A famous linguist once said:
"There is no language wherein a double
positive can form a nega
I've found that using getNetText rather than postNetText will not bring
this message if the script being called is at the same URL that the
shockwave was served from...
Pete
On Saturday, June 23, 2001, at 03:06 AM, Brad Hile wrote:
> Hello lingo-guru's
>
> I have written a shockwave app that
At 11:52 23/06/2001, Tom Richardson wrote:
>Hey Mark,
>
>I am testing first, and it comes back ok
>but after doing the switch the color depth does not go to 25 bit (or 32 bit)
>
>It seems as if the Buddy API simply is not working?
>the color depth never changes?
>
>Has it worked for you?
It worke
Thanks for the me help.
I started reading Loope.
Enrique
-
Sr. Enrique
Libros, Multimedia y Software en Castellano
Visite nuestra tienda online:
http://www.SrEnrique.co.il
Dirección electrónica
> i have a problem to read the sound 'wav' well.
> the sound is changing and is'not continuous.
> i don't know exactly why...
> i wonder that all of sound piste is busy.
> when the flash animation is playing, 3 or 2 sound pistes are begining in
> minium.
>
> if anybody knows something, help me!!
I'm having a very unusual problem with DirectMediaXtra. I'm setting up a
cross-platform CD that links external casts depending on whether the client
has a mac or pc. The pc links a cast with 3 DirectMediaXtras that are
further linked to their avi counterparts all in the same directory. The
>
> I don't understand the role that "me" plays in a behavior argument list,
> could someone please explain it to me?
>
me is just a variable naming convention in lingo, you can name it 'you',
'them', 'us' or anything else you like. The significance of this variable
(whatever you like to name i
Unlike movie scripts, which can be called by anyone, and have unique names
(only one is valid for the whole program), various sprites and objects can
have their own private scripts with their own private actions and
properties. They don't require unique names, though, since you refer to
them
Hi folks,
I'm new to the list and to lingo, I have experience in some programming
languages.
I don't understand the role that "me" plays in a behavior argument list,
could someone please explain it to me?
Thanks,
Enrique
--
Hey Mark,
I am testing first, and it comes back ok
but after doing the switch the color depth does not go to 25 bit (or 32 bit)
It seems as if the Buddy API simply is not working?
the color depth never changes?
Has it worked for you?
thankyou for your input
Tom
"Mark A. Boyd" wrote:
> At 18
hi...
i have a problem to read the sound 'wav' well.
the sound is changing and is'not continuous.
i don't know exactly why...
i wonder that all of sound piste is busy.
when the flash animation is playing, 3 or 2 sound pistes are begining in minium.
if anybody knows something, help me
[
At 18:25 22/06/2001, Tom Richardson wrote:
>set OKvid = baSetDisplay( 800 , 600 , 32 , "temp" , false)
>
>this sets the video screen resolution just fine...
>but if the color resolution is 16 bit the buddy API is not setting the
>color depth to 32 (or 24)
You'll need to test whether the display
Hello lingo-guru's
I have written a shockwave app that allows users to assemble a list of
products that they want info on, this list along with their details gets
sent to a cgi that outputs an email to the company involved.
The problem is when sending off the data the shockwave alert dialogue com
Please help...
I am using the Buddy API 3.4
to switch the monitor resolution...
this is what I an doing
set OKvid = baSetDisplay( 800 , 600 , 32 , "temp" , false)
this sets the video screen resolution just fine...
but if the color resolution is 16 bit the buddy API is not setting the
color dep
hi all-
okay maybe i'm being lazy now, but i have a question.
in my best andy rooney impression:
did you ever notice that file io fails to write to a file that lives in
the director folder? maybe it's me, but if i create a file on the
desktop, i can write to it just fine, but if i cre
here is the code.
It was created by Branden J. Hall.
If you have question on it's use just e-mail me.
--
The only difference between Sound2 and Sound is the attachSound function.
When you call it with Sound2 you have to have an additional parameter
yes,
something had been developed by someone for that.
you want me to send you the code?
or I could just post it here?
Brian Douglas (:ub)
AS/L/JS
6'2" 170lbs. eyes:bwn hair:bwn nose hair:well groomed
Imaginar
Sorry for the off topic.
I'm wondering if there is a way in Flash to test whether an audio
is playing or is completed.
Thanks
Mike
[To remove yourself from this list, or to change to digest mode, go to
http://www.penworks.com/LUJ/lingo-l.cgi To post messages to the list,
email [EMAIL PROTECT
ore suited to games.
HTH.
Regards,
Pranav
---
"Simply stated, it is sagacious to eschew obfuscation."
--Norman Augustine
Hello allI just joined the list, and figured what better way to start
than with a question:)
I am curr
Hello allI just joined the list, and figured what better way to start
than with a question:)
I am currently developing a small game using Director 8 and Multiuser
server. Basically, I need the users to be able to move a widget around the
screen using arrow keys.
The move is then sent to
>> Can anyone recommend a printing xtra that is supported by Director 8+.
>>
>> I am picking up a job midstream, the former programmer had been trying to
>> use Print-O-Matic but apparently had a conflict with Director 8.
>
>Yeah? Was the former programmer competent?
Obviously not, I downloaded t
> I need to find information about how xtras communicate
> with the Windows OS.
To find out _how_ they communicate, consult either anyone who writes them,
or the XDK on Macromedia's site. To _gain_access_ to the Windows API, use
Ravi's DLLGlue Xtra.
That said, the XDK documentation discusses MOA
otigt, um diese Anwendung zu
starten. Wollen Sie Quicktime jetzt installieren?", "QuickTime wird
benotigt", "YesNo", "Question", 1 )
put choice
if choice = "Yes" then
set code = baRunProgram( the pathname &"QuickTimeInstaller",
&quo
At 2:18 PM -0400 6/7/01, Bill Numerick wrote:
>I thought I saw a book on how to create Xtras a while back... am I wrong?
>Can't remember for sure ;)
You're thinking about Rich Shupe's "Director Xtras" or Chuck Henderson's
"Xtravanganza" books. In either case, these books do not cover the
develop
> Can anyone recommend a printing xtra that is supported by Director 8+.
>
> I am picking up a job midstream, the former programmer had been trying to
> use Print-O-Matic but apparently had a conflict with Director 8.
Yeah? Was the former programmer competent? What's the conflict, and have you
f
> All works well...But I want to put in a warning box to tell
> the end user that the program will quit and install
> Quicktime. Where do I pu this code?
I assume that you are going to put in an Alert. however, I don't think that
you can do this in the prepareMovie. I think you will need to do it
Brian Farmer wrote:
>
> Hello list,
>
> I have the following code:
>
> on preparemovie
> if quickTimeVersion()<4 then
alert "You need QuickTime 4, here's your chance to install it."
> open "QuickTime Installer.smi"
> halt
> end if
> end
>
> All works well...But I want to pu
I know there is one called mPrint - I believe it is only
for Windows though. Available from MediaShoppe:
http://www.mediashoppe.com
-Warren [not the Howdy, but howdy anyways!]
[To remove yourself from this list, or to change to digest mode, go to
http://www.penworks.com/LUJ/lingo-l.cgi To post
Can anyone recommend a printing xtra that is supported by Director 8+.
I am picking up a job midstream, the former programmer had been trying to
use Print-O-Matic but apparently had a conflict with Director 8.
tia,
Brian Douglas (:ub)
Hello list,
I have the following code:
on preparemovie
if quickTimeVersion()<4 then
open "QuickTime Installer.smi"
halt
end if
end
All works well...But I want to put in a warning box to tell the end user that the
program will quit and install Quicktime. Where do I pu this code?
Th
1 - 100 of 455 matches
Mail list logo
