me to dasdfmt >200k cylinders.
Anybody has any experience with this ?
Thank you
===
Marian Gasparovic
===
"The mere thought hadn't even begun to speculate about the merest
possibility o
why I use 0-END which forces me to take care of volume serial in Linux
because I need to keep the volume serial names consistent to naming scheme.
===
Marian Gasparovic
===
"The mere thought hadn't even begun to speculate about the merest
poss
Pedro,
this would be true for RHEL 6.1 which supports HyperPAV and also provides
transparent usage of PAVs. But it requires kernel 2.6.25+ while RHEL 5.6 is
2.6.17.
===
Marian Gasparovic
===
"The mere thought hadn't even begun to speculate
t blacklist, no exceptions and it will
blacklist anything higher that dasdz.
Any ideas how to do that ?
Thank you
===
Marian Gasparovic
===
"The mere thought hadn't even begun to speculate about the merest
possibility of crossing my mind."
===
Marian Gasparovic
===
"The mere thought hadn't even begun to speculate about the merest
possibility of crossing my mind."
--
For LINUX-390 subscribe / signoff /
Dave, in Cygwin console (cmd window) enter "xhost +" command, it will allow
remote machines to connect to your local X server.
(my apologies if this email came three times, my yahoo session behaved
strangely)
=======
Marian Gasparovic
===
"The mere
dasd_configure in SLES11 or edit zipl.conf in SLES10
===
Marian Gasparovic
===
"The mere thought hadn't even begun to speculate about the merest
possibility of crossing my mind."
--- On Mon, 10/11/10, Mark Pace wrote:
> From: Mark Pace
&
orted, incompatible pages
inside IBM were greatly reduced.
===
Marian Gasparovic
===
"The mere thought hadn't even begun to speculate about the merest
possibility of crossing my mind."
--- On Thu, 7/1/10, John Campbell wrote:
> From: John Camp
prove, other areas I would like to improve, but given the time constraints
and resources...
It helps if you go to redbooks site and give comments, they come to
management...
===
Marian Gasparovic
===
"The mere thought hadn't even begun to speculate
splay).
===
Marian Gasparovic
===
"The mere thought hadn't even begun to speculate about the merest
possibility of crossing my mind."
--- On Fri, 1/8/10, Bernie Wu wrote:
> From: Bernie Wu
> Subject: Re: SLES11 - lots of errors streaming
System, 32-bit,
Documentation and Minimal System. Just those four.
===
Marian Gasparovic
===
"The mere thought hadn't even begun to speculate about the merest
possibility of crossing my mind."
--- On Fri, 1/8/10, Bernie Wu wrote:
> From: Be
Hi Bernie,
how do you run it ? I start vncserver, connect there via vncviewer from my
desktop and run yast2 from xterm. I get no error at all.
Are you using full blown desktop ? I see some gnome in your output...
===
Marian Gasparovic
===
"The mere thought h
Sue,
use dasd_configure command. It brings device online and also makes sure it will
come online after next IPL.
for example
dasd_configure 0.0.0105 1
===
Marian Gasparovic
===
"The mere thought hadn't even begun to speculate about the merest
poss
thread priority (lowest = -10, highest =
10 or)?
I know this is just a wild shot with so little info, but maybe it rings any
bell to anybody ? Any idea ?
Thank you
===
Marian Gasparovic
===
"The mere thought hadn't even begun to speculate about
090
===
Marian Gasparovic
===
"The mere thought hadn't even begun to speculate about the merest
possibility of crossing my mind."
--- On Tue, 12/15/09, Caleb C Ong wrote:
> From: Caleb C Ong
> Subject: LUN numbers for DS8000
> To: LIN
always use
CMSDISK parameter. BTW, in general, parmfile usage is not documented very well
in my opinion.
When you can modify parmfile, just adding mpath keyword should save the day I
will see tomorrow.
===
Marian Gasparovic
===
"The mere thought hadn&#x
you
===
Marian Gasparovic
===
"The mere thought hadn't even begun to speculate about the merest
possibility of crossing my mind."
--
For LINUX-390 subscribe / signoff / archive acce
setting it complains.
What is your memory setting for installation ? My guest was 512MB.
===
Marian Gasparovic
===
"The mere thought hadn't even begun to speculate about the merest
possibility of crossing my mind."
--- On Tue, 12/1/09, Mark Post
.
Activating manual setup program.
And then manual setup starts.
I checked documentation, this possibility is not mentioned there, they use iso
loop-mounted on NFS.
Any idea if this feature was dropped or I do something wrong ?
Thank you
===
Marian Gasparovic
Thank you, that was exactly what I was looking for.
===
Marian Gasparovic
===
"The mere thought hadn't even begun to speculate about the merest
possibility of crossing my mind."
--- On Fri, 11/20/09, Mark Post wrote:
> From: Mark P
Sorry, I was talking about SLES 11 which does not support dasd= parameter and
does not use hwcfg files.
Looks like the only solution now is to save lsdasd output when everything is ok.
===
Marian Gasparovic
===
"The mere thought hadn't even begun to
on VM side, or disk problem, whatever) and you want to check
which dasd is not online although you set it to be online on each boot.
===
Marian Gasparovic
===
"The mere thought hadn't even begun to speculate about the merest
possibility of crossi
Mark,
as dasd= parm in zipl.conf is not used now, how can I check which DASDs were
supposed to be online ?
Thank you
===
Marian Gasparovic
===
"The mere thought hadn't even begun to speculate about the merest
possibility of crossing my mind."
came with. There
might be again another change in SLES 11.
I agree with Mike, look at updated cookbook, this time as a redbook. It does
not use chroot and I like that approach more. As Mike says, there are
tradeoffs, but I think it is much cleaner without chroot.
===
Marian
re at
http://www.redbooks.ibm.com/redbooks.nsf/pages/history?Open
If you want, you can share your experience or success stories with ITSO
redbooks or read what others have to say, by clicking on the "Share your story"
link.
Marian Gas
-websphere-db2
Thank you
===
Marian Gasparovic
===
"The mere thought hadn't even begun to speculate about the merest
possibility of crossing my mind."
__
Thanks to everybody, documentation "error" is
explained, depends on platform you use for ftp client.
What about the other part of the question ? Has
anybody installed Linux from Starter System via NFS ?
Thank you
Marian
--- David Boyes <[EMAIL PROTECTED]> wrote:
> > I configured NOVSTART, ever
--
> For LINUX-390 subscribe / signoff / archive access
> instructions,
> send email to [EMAIL PROTECTED] with the
> message: INFO LINUX-390 or visit
> http://www.marist.edu/htbin/wlvindex?LINUX-390
>
===
Marian Gasp
"site fix 80" should be "quote site fix 80"
I will recreate the error, but it will take some time.
--- David Boyes <[EMAIL PROTECTED]> wrote:
> > I configured NOVSTART, everything went fine, the
> only
> > problem in documentation is missing "quote" in ftp
> > commands.
>
> Could you be more sp
tw, to get through NFS check in
3270 install screen, /srv/repository did not work, but
/srv/repository/ did)
When I use FTP, it works without a problem.
Any idea ?
Thank you
=======
Marian Gasparovic
===
"The mere thought hadn't even begun to speculate about the
Mark,
how is it with reporting a bug/problem ? Do you need
any special license/subscription/whatever for that ?
Marian
--- Mark Post <[EMAIL PROTECTED]> wrote:
> >>> On Mon, Jan 7, 2008 at 8:42 AM, in message
>
<[EMAIL PROTECTED]
> com>, "Ceruti, Gerard G"
> <[EMAIL PROTECTED]> wrote:
> -snip-
.
Marian Gasparovic
IBM Slovakia
--- "Evans, Kevin R" <[EMAIL PROTECTED]> wrote:
> Mark,
>
> I'm glad that this worked for you (and those people
> here that you
> obviously help). I think that RH should maybe learn
> from this, but seems
> to me that the
errors. Also if you
configured customer center, remove those rpms first,
as ddescribed in the book.
HTH
Marian Gasparovic
IBM Slovakia
--- Russ Burtnett <[EMAIL PROTECTED]> wrote:
> I have a different question about the cookbook. I
> installed SLES 10, no
> not SP1, that's d
Aria,
I updated SLES10 to SP1 and I am getting this
lnxsu1:~ # SPident
CONCLUSION: System is up-to-date!
foundSLE-10-s390x-SP1
--- Aria Bamdad <[EMAIL PROTECTED]> wrote:
>
> 1-After all packages are updated to SP1, if I issue
> SPident, get
> a System is NOT up-to-date. It seems like it
production, it will be
wy slower than IFL which is full speed. And slow
response is not a good start for PoC.
We have many customers running Linux on z890 happily,
most of my customers run it on IFL with or without
z/VM.
Marian Gasparovic
IBM Slovakia
--- "Rakoczy, Dave" <[EMAIL PROT
Mark, it is mentioned in the README indeed, in the
section how to prepare installation server (which is
documented horribly in the readme btw)
Marian Gasparovic
IBM Slovakia
--- Mark Post <[EMAIL PROTECTED]> wrote:
> >>> On Fri, Jul 20, 2007 at 3:15 PM, in message
>
<[E
Lionel,
both are incorrect (I mean in IBM usage). Correct name
is Linux for System z.
Marian Gasparovic
IBM Slovakia
--- Lionel Dyck <[EMAIL PROTECTED]> wrote:
> So what is the preferred way to designate Linux for
> zSeries - as z/Linux
> or zLinux ?
>
> Thanks
>
>
Tom,
that is incorrect, HSA is allocated in purchased
memory.
Also 2 GB statement is wrong, it depends on number of
devices, number of LPs etc
It may range from less than 2 GB to up to 4.5 GB for a
fully configured system. There is a HSA Estimator Tool
available for this on Resource Link.
Marian
gt; Steve Mitchell
> Sr Systems Software Specialist
> Blue Cross Blue Shield of Kansas
> (785) 291-8885
>
> 'There are no degrees of Honesty-you're either
> Honest or you're not!
>
>
>
>
> Marian Gasparovic
> <[EMAIL PROT
If you know anybody talking Dutch, ask him/her what it
means in Dutch, you will be surprised and never forget
to smile when you hear SOA :)
Marian
--- "Evans, Kevin R" <[EMAIL PROTECTED]> wrote:
> I love the SOA comment...it's a big buzzword around
> here right now. I am
> sure that SOA means di
John,
for #1, what about issuing 'df' command and parse that
directory ? Or 'mount' command ? I mean on z/OS side.
Marian
--- "McKown, John" <[EMAIL PROTECTED]>
wrote:
> I'm posting this to both the MVS OS (z/OS UNIX)
> forum and the Linux
> forum because it involves both platforms, at least
> t
n our case, we have (with diferent IP
> address)
>
>
>
Install=nfs://129.40.178.130/data/SLES-10-CD-s390x-GMC-CD1.iso
>
>
> What do you mean?
>
> Thanks a lot.
>
>
>
>
>
>
>
>
>
>
>
>
>
>
Jose,
there is an error in the book, in your parmfile you
need whole path to the .iso image
Like this
Install=nfs://129.40.178.130/nfs/sles10/SLES-10-CD-s390x-GMC-CD1.iso
lockd message is expected
Marian
--- Jos© Miguel Villar Gonzalez
<[EMAIL PROTECTED]> wrote:
> Hello.
>
> We had ins
John,
yes you are correct.
zAAPs and zIIPs are ment to lower TCO of new workload
on z/OS.
For Linux you have IFL which is MUCH cheaper than
regular CP. And what is important, it is alway full
speed engine regardless of speed of your subcapacity
CPs. (same applies to zIIP and zAAP).
And if they ask
offer "minimal graphical
system (without KDE)" as SLES9 did.
However, if vncserver is enough, I use only base
system and 31 compat libraries (so only two checks in
installer) and I can install whatever product which
needs X interface. Using vncserver.
Ch
Yes, I did, several times, several customers, no
problem. Installed packages from CD[1-3] with yast.
M.
--- Brendan Kelly <[EMAIL PROTECTED]> wrote:
> Anyone else tried installing packages from the media
> (other than CD1) post
> install on a SLES9 SP3 on z? Either 31 or 64 bit.
>
> Cheers
>
I always run mksles9root without -m option and make it
accessible via NFS. Never had any problem with
symlinks and such.
Could it be there is some issue when you just loop
mount images compared to copy them ?
--- Brendan Kelly <[EMAIL PROTECTED]> wrote:
> Tried it - got same results.
>
> I ask
Bob, check your parmfile for SSHpassword.
Marian
--- Bob Levad <[EMAIL PROTECTED]> wrote:
> Greetings,
>
> We apparently haven't found the right doc or help
> screen.. We haven't found
> a place to set the root password during install on
> zVM5.2 via ftp. When we
> SSH in after the first IPL
At some performance presentation I heard nice sentence
about this - "... and all those fast processors wait
at the same high speed"
Marian
--- Alan <[EMAIL PROTECTED]> wrote:
> periods of polling. That
> can significantly impact CPU availability and since
> its often time bound a
> faster process
No problem, buy lower capacity setting and then you
can overclock through web via resourcelink, no need
for screwdriver.
Warning - works only on CP, not on IFL.
--- "McKown, John" <[EMAIL PROTECTED]>
> Hum, I wonder if we could "overclock" a z9 CPU?
> Well, it works on Intel
> CPUs and AMD CPUs.
On Download page there is file reference table with
architecture column.
--- Jon Brock <[EMAIL PROTECTED]> wrote:
> Yep, that's it. (This was my first exposure to the
> file command. Into the toolbox it goes.)
>
> I had not been able to find any documentation on the
> site that would tell m
Jon,
I looked at download page and they say it is all for
i386 architecture...
--- Jon Brock <[EMAIL PROTECTED]> wrote:
> For the sake of my own curiosity, I am looking at
> installing WorldVista (an electronic medical-records
> system built on the U.S. Veterans Administration's
> VistA wor
please advise the sender
> immediately by reply e-mail
> and delete this message. Thank you for your
> cooperation."
>
> -Original Message-
> From: Linux on 390 Port
> [mailto:[EMAIL PROTECTED] On Behalf Of
> Marian Gasparovic
> Sent: Thursday, January
# rpm -qa|grep -i spident
SPident-0.9-74.4_SLES_10_s390x_current_CD
Which looks more curent than what you say is
latest.
Marian
--- Dell Harris <[EMAIL PROTECTED]> wrote:
> Are you running the latest
> SPident?.SPident-0.9-42.30
>
> >>> Michael MacIsaac <[EMAIL PROTECTED]> 01/11/07
> 8:4
Right. And how will you interpret this ?
# SPident -vvv
Summary (using 476 packages)
Product/ServicePack conflictmatch
update (shipped)
SLES-10-s390x-current 1 0.1%474 99.6%
0 (1991 23.8%)
- sitar 1.0.7-270.1 < 1.0.6-7.2
Unknown
WAS is not supported yet, DB2 is.
Marian
--- James Melin <[EMAIL PROTECTED]> wrote:
> Hi Marcy!
>
> Just Curious.Where have you seen an IBM
> announcement that WAS version 6 or higher supports
> SLES 10. We've been waiting for that particular
> information.
>
>
>
>
> Marcy C
Bernard,
my experience with LVM and SLES10 is, you can click
dasdfmt button in Expert Partitioner before you click
LVM. It will create one partition on given DASD. Click
dasdfmt for each DASD you need and then you can add
them to LVM.
Marian
--- Bernard Wu <[EMAIL PROTECTED]> wrote:
> Thanks Ro
And if you install with VNC it is even worse because
you cannot SSH until after install is complete. In
SLES9 SSH was up during VNC, not in SLES10
marian
--- RPN01 <[EMAIL PROTECTED]> wrote:
> I ran into this as well; the issue is that if you
> create a volume group,
> YaST doesn't bother to do
Bernard,
good news. We work with Mike on cookbook update for
SLES10. If you choose only base and 32bit and then
remove about 60 packages (I am sure it can be more)
you will get about 1.3GB free on 3390-3.
Marian Gasparovic
IBM Slovakia
--- Bernard Wu <[EMAIL PROTECTED]> wrote:
> Thanks
install only Server base and 32bit, there
are many packages you can remove safely later.
Unfortunately a lot of useless packages have to stay
because of complicated dependencies.
Marian Gasparovic
IBM Slovakia
--- Bernard Wu <[EMAIL PROTECTED]> wrote:
> Hi List,
> The default software s
DB (UNIX) DB2. Not
> really large ones,
> but some toe stubbing might occur when migrating.
DB2 for z/OS is different code and some features
differ. I am not DB2 guy...
Marian Gasparovic
IBM Slovakia
__
Do You Yahoo!?
Tired of spam? Yahoo! Mail ha
Steve,
you cannot IPL z/OS.e on IFL, it must be standard CP.
Licensing is different (about 90% cheaper compared to
z/OS) and there are some restrictions (for # of TSO
users, cannot run CICS etc).
Marian Gasparovic
IBM Slovakia
--- Steve Gentry <[EMAIL PROTECTED]>
wrote:
> Pleas
60 14.7%
Legend for Package Details:
- conflicting package (found < expected)
CONCLUSION: No supported Product/ServicePack found at
all!
(at least one conflict has been detected everywhere)
it says
1.0.7-270.1 < 1.0.6-7.2
===
Marian Gasparovic
===
-sync
and after online update they are back...
===
Marian Gasparovic
===
"The mere thought hadn't even begun to speculate about the merest
possibility of crossing my mind."
__
Do You Yahoo!?
Tired o
You can still add more DASD to swap and you will get
much more memory. Performance will suffer, but you
will be able to find out if memory constraint is the
reason for install failure.
Marian
--- David Stuart <[EMAIL PROTECTED]> wrote:
> Mark,
>
> If it is, in fact, a memory issue, then I'm pro
Dave,
how long is "never returns" ? Did you check what is
going on during that time ? For examle with 'top' ot
'vmstat' in another terminal ? Memory constraints ?
Marian Gasparovic
IBM Slovakia
--- David Stuart <[EMAIL PROTECTED]> wrote:
> Evening,
>
&
Yes, there is an error in doc, it was my post and
somebody confirmed it was already reported. If you
search in archive you will find exact error, I just
don't remember. But the parmfile I sent you privately
works for sure.
Marian
--- Stephanie A Maginn <[EMAIL PROTECTED]> wrote:
> I tried switchi
Stephanie,
(Mike and I) we are working on Virtualization Cookbook
for SLES10 right now. I haven't encountered this
problem. Can you send your PARMFILE ?
What happens if you try to ping that IP from your
windows while your installation is not running ?
Marian Gasparovic
IBM Slovakia
--- Step
Tom,
it is not downloadable anywhere.
Just contact you SWG or client rep and ask for
trial/demo. It requires some demo contract signing but
you can get it for three months. It is the best
possibility I know which works (done twice).
Marian Gasparovic
IBM Slovakia
--- Tom Duerbusch <[EM
roblem.
> Your Gateway specification has 6 octets instead of
> 4. I don't know if
> this would mess up the parsing of the Hostname or
> not, but it might.
>
>
> Mark Post
>
> -Original Message-
> From: Linux on 390 Port
> [mailto:[EMAIL PROTECTED] On Behalf Of
it
> in, I see a problem.
> Your Gateway specification has 6 octets instead of
> 4. I don't know if
> this would mess up the parsing of the Hostname or
> not, but it might.
>
>
> Mark Post
>
> -Original Message-
> From: Linux on 390 Port
> [mailto:[E
x is not
> used, installer asks for it after first reboot. Am I
> doing something wrong ?
> Thank you
>
> ===
> Marian Gasparovic
> ===
> "The mere thought hadn't even begun to speculate
> about the merest
> possibility of
Hello all,
I install SLES10 with parameters in PARMFILE.
Everything works nicely, only Hostname=xxx is not
used, installer asks for it after first reboot. Am I
doing something wrong ?
Thank you
===
Marian Gasparovic
===
"The mere thought hadn't even
But if one of them is faster, you will be slowed down
to speed of slower one of course.
Marian
--- "Romanowski, John (OFT)"
<[EMAIL PROTECTED]> wrote:
> It's OK to use FBA disks in a LVM volume group that
> has CKD disks in it.
> If Make the FBA's LVM physical extent (PE) size the
> same as the
If llop is not compiled in kernel but rather as a
module, you can use
rmmod loop
modprobe loop max_loop=nn
--- Lee Stewart <[EMAIL PROTECTED]>
wrote:
> Hi... I have my new SLED10 Intel system that I
> want to use for my FTP
> server for z installs, but...
>
> Trying to run the installation
ring) and the host interface (qdio or lcs).
I think the right syntax is OsaInterface=
OsaMedium=
This way it works in parmfile and makes sense if you
match it with description
Marian Gasparovic
IBM Slovakia
__
Do You Yahoo!?
Tired of spam? Yahoo
Because of PC centric nature of Linux ?
Really, I went to LPIC-1 exam, from first 10 questions
9 () were about X Windows. first one was like
which file stores default greeting for GNOME, another
one where is default background stored etc. Later a
lot of BIOS, sound settings, IRQs, USB etc. I pa
In situations like this, check matrix at
http://www-1.ibm.com/linux/matrix/linuxmatrixhwz.html#
WII is not available on z
--- Frank Swarbrick <[EMAIL PROTECTED]>
wrote:
> Is anyone out there in zSeries land running
> Websphere Information
> Integrator (WII) on zSeries Linux?
>
> Does anyone kno
lable for zLinux yet.)
> 3) RedHat's Global File System (original done by
> Sistina, I believe...)
> http://www.redhat.com/software/rha/gfs/
>
> These are all pure Linux file systems; there is no
> z/VM involvement at
> all, except for z/VM providing the normal hypervisor
>
mages.
Are there any other possibilities to share fs r/w ?
Thank you
===
Marian Gasparovic
===
"The mere thought hadn't even begun to speculate about the merest
possibility of crossing my mind."
___
When finished, save
> /home/userid/.Xresources and open a
> shell. Issue
> the command xrdb -merge .Xresources to activate
> the overrides. The
> next time you open a session with x3270, the changes
> will be in effect.
>
> Different screen models:
>
>
Ranga, create .x3270pro in your home directory and
copy what John posted here (I have very similar one).
--- Ranga Nathan <[EMAIL PROTECTED]> wrote:
> I have a problem with the keymap too. some function
> keys dont work and I
> dont know where the definitions live.
> Is it part of the source that
Ye, that will become very interesting. There are
names commonly used in US that are very offensive
words in my native language. I demand those people to
change their names immediately :)
To return back to mainframes, is "main" part of
mainframe politically correct ? There are frames in
HTML tha
Josh, I use x3270 and it is possible to remap keys as
you want, even control key to enter etc.
Put this into .x3270pro in your home directory
x3270.keymap: mine
x3270.keymap.mine: #override \
Return: Newline() \n\
Insert: ToggleInsert() \n\
Prior: PF(7) \n\
End: FieldEnd() \n\
Co
commercial distribution available
etc
Any links available ?
BTW it comes up here from time to time, but as it
changes - what are actual prices for redhat and suse ?
Thank you
=
===
Marian Gasparovic
===
"The mere thought hadn't even begun to specu
.
>
> Regards,
> Dennis
>
--------
> Dennis Musselwhite ([EMAIL PROTECTED])
> z/VM Development -- CP Network Simulation -- IBM
> Endicott NY
=
===
Marian Gasparovic
===
"The mere tho
-- Alan Altmark <[EMAIL PROTECTED]> wrote:
> On Wednesday, 10/15/2003 at 08:24 MST, Marian
> Gasparovic
> <[EMAIL PROTECTED]> wrote:
> > Some kind of zSeries, it runs in 64 bit mode. (not
> > ours, so I cannot find out)
>
> I think you have one or both of these p
e for sure :)
Marian
--- Alan Altmark <[EMAIL PROTECTED]> wrote:
> On Wednesday, 10/15/2003 at 08:24 MST, Marian
> Gasparovic
> <[EMAIL PROTECTED]> wrote:
> > Some kind of zSeries, it runs in 64 bit mode. (not
> > ours, so I cannot find out)
>
> I think you
Some kind of zSeries, it runs in 64 bit mode. (not
ours, so I cannot find out)
--- Alan Altmark <[EMAIL PROTECTED]> wrote:
> On Wednesday, 10/15/2003 at 12:14 MST, Marian
> Gasparovic
> <[EMAIL PROTECTED]> wrote:
> > Thank to kind people on this list I know the VM
>
qdio guestlan
--- David Boyes <[EMAIL PROTECTED]> wrote:
> > Then why there are ones in redbook I have followed
> ?
> > And how does it handle dhcp then ?
>
> Are your GLANs type OSA or hipersocket?
__
Do you Yahoo!?
The New Yahoo! Shopping - with improved product
d Boyes
> Sine Nomine Associates
>
>
> > -Original Message-
> > From: Linux on 390 Port
> [mailto:[EMAIL PROTECTED] Behalf Of
> > Marian Gasparovic
> > Sent: Wednesday, October 15, 2003 3:15 AM
> > To: [EMAIL PROTECTED]
> > Subject: Re: hw addr
> >
&g
Thank to kind people on this list I know the VM part
of my question. Could anybody help with Linux part ?
Why do I get hw address of zeros ?
Thank you
Marian
--- Marian Gasparovic <[EMAIL PROTECTED]> wrote:
> And qdio says upon loading
> qdio : Was not able to determine general
>
Isn't there anybody who can help with it ?
Marian
--- Marian Gasparovic <[EMAIL PROTECTED]> wrote:
> And qdio says upon loading
> qdio : Was not able to determine general
> characteristics of all Hydras aboard
>
> --- Marian Gasparovic <[EMAIL PROTECTED]> wrote:
And qdio says upon loading
qdio : Was not able to determine general
characteristics of all Hydras aboard
--- Marian Gasparovic <[EMAIL PROTECTED]> wrote:
> Hi all,
> can anybody help please ? When I create NIC in zVM,
> it
> says Port 0 MAC: 00-04-AC-00-00-00
> When I sta
wrong ?
Thank you
I use Debian 2.4.21 and zVM 4.3.
And another question, it is pure VM - they say in
redbook, I need APAR VM63172 installed for DHCP
broadcast. How do I find out if it is installed ? I
never worked with VMSES.
=
===
Marian Gasparovic
===
"The
> more minidisks). I only have to reboot Linux and the
> disks are online.
You don't have to reboot Linux It was answered
here yesterday, use
echo "add device range=xxx-yyy" >> /proc/dasd/devices
__
Do you Yahoo!?
The New Yahoo! Shopping - with improved prod
nce
> Systems Engineer I
> Pennsylvania State University
> Administrative Information Services - Infrastructure
> Rm 25 Shields Bldg., University Park, Pa. 16802
> 814-863-4739
> [EMAIL PROTECTED]
=
===
Marian Gasparovic
===
"The mere thought hadn't even begun to speculate about the merest possibility of
crossing my mind."
__
Do you Yahoo!?
The New Yahoo! Shopping - with improved product search
http://shopping.yahoo.com
I found it in the meantime, ipl clear was the magic
touch :)
Marian
--- Marian Gasparovic <[EMAIL PROTECTED]> wrote:
> Hi all,
> I have installed Debian390 under zVM, it works fine,
> but whenever I shutdown Debian, I cannot IPL it
> again,
> it goes to disabled state,
I am not VM enabled, could
anybody point me where to look ? Thank you
=
===
Marian Gasparovic
===
"The mere thought hadn't even begun to speculate about the merest possibility of
crossing my mind."
__
Do yo
I am on 2.4.21, disk_io is empty too.
Marian
--- Matt Zimmerman <[EMAIL PROTECTED]> wrote:
> On Fri, Jul 18, 2003 at 08:37:55AM -0600, Hodge,
> Robert L wrote:
>
> > I'm having problems with the sysstat package on
> the Debian 3.01
> > distribution. "sar -b" is returning all zeroes for
> disk acti
1 - 100 of 104 matches
Mail list logo
