Hello List:
I hope my question does not start war of the posts. This question is
genuine. Please answer objectively:
I am test setting a Master Server (MS) with CentOS 4.3, freeRADIUS, DNS,
Apache, (mySQL PostgreeSQL), PHP, Postfix, etc. This Master Server will
have all the software I we
Which SATA drive works under LINUX O/S?
Kirti
-Original Message-
From: Larry Lowry [mailto:[EMAIL PROTECTED]
Sent: Friday, November 12, 2004 4:06 PM
To: Fagyal Csongor; [EMAIL PROTECTED]
Subject: Re: Low-end SATA vs. SCSI
For cost reasons I use SATA. Does the machine already
have a
DuBois [mailto:[EMAIL PROTECTED]
Sent: Wednesday, November 10, 2004 8:18 PM
To: Kirti S. Bajwa; [EMAIL PROTECTED]
Subject: RE: RAID Question
At 15:19 -0500 11/10/04, Kirti S. Bajwa wrote:
Hello List:
System: RH9, MySQL 4.1.7
I am in the process of re-setting up (I have test setup 4-5 times
Hello List:
System: RH9, MySQL 4.1.7
I am in the process of re-setting up (I have test setup 4-5 times) a data
server with the above software. This server consists of 2-CPU (Intel)
RAID-1, 1-40GB IDE HDD for O/S 2-250GB IDE HDD for storing data. 250 GB
IDE HDD are mirrored (RAID-1).
Hello:
While reading Red Hat / Apache 2 + SSL /PHP /mySQL
http://www.suteki.nu/howto.html, I came across the following configure state
(Page 3 Section 2):
./configure --with-openssl --with-isam --prefix=/usr/local/mysql
As you all know this configures the mySQL. My question is; what does
I do not know if this is the right way or not but this is how I have done
it:
Delete Mysql-Version folder, from where you installed MySQL. It is normally
in '/usr/local' folder. Then re-install MySQL.
Hope it works.
Kirti
-Original Message-
From: FayeC SQL [mailto:[EMAIL PROTECTED]
I have tried installing on LINUX syste got errors.
Kirti
-Original Message-
From: Nathan Mealey [mailto:[EMAIL PROTECTED]
Sent: Monday, September 20, 2004 3:34 PM
To: [EMAIL PROTECTED]
Subject: DBD::MySQL
Has anyone out there had any trouble installing DBD::MySQL for MySQL
4.1.x on
Hello:
For the last couple of months I have been learning installing LINUX, MySQL
opther software. Until last week I installed mysql-4.0.20 and then installed
PERL modules without problem.
Last week the new MySQL verion became available I started installing it.
Now when I install PERL modules,
Hello:
I am trying to install Perl support with MySQL. After installing MySQL
(v4.0.20)I run the following commands:
% echo $PATH
% perl -MCPAN -e shell
Note: Answer no to auto-configure perl.
cpan install Data::Dumper
(Upto this point. Following commands are
Hello:
I am trying to install Perl support with MySQL. After installing MySQL
(v4.0.20)I run the following commands:
% echo $PATH
% perl -MCPAN -e shell
Note: Answer no to auto-configure perl.
cpan install Data::Dumper
(Upto this point. Following commands are
This is my first attempt to design and test MySQL. I have used MS SQL for
number of years. I do appreciate if members of this list can recommend a
good GUI application for MySQL. I want the GUI application to design DB,
design Quiries, etc.
Thanks.
Kirti
--
MySQL General Mailing List
For
Hello:
I am posting this message on freeRADIUS, vpopmail mysql lists. This may
get few people upset but please read
I am trying to install (on RH9), qmail, vpopmail, mysql, Courier-IMAP,
squirrelmail, etc., with backend data on MySQL. On another computer I have
installed RH9 freeRADIUS
Hello List:
I had posted this message on vpopmail list but no one can help. I am posting
this message on MySQL hoping that someone on this list is using vpopmail
MySQL!!!
Please consider me a newbie in the area of LINUX, MySQL, vpopmail, etc.
I have setup two servers as follows:
(1) A master
Hello List:
I want to setup two servers (later more servers added) sharing mysql data as
a NFS Server Client relationship;
Server-A:
--
RH9, mysql-4.0.20, NFS Master
This server is a DATA server. All data for the entire site is kept on this
server in /usr/local/mysql/var which is
Hello:
I am trying to setup a client mysql server to connect to a Master MySQL
server by MUST using a PASSWORD!!
CURRENT SYSTEM:
Master MySQL Server:
-
Name: datam
IP: 192.168.10.21
O/S:RH9
MySQL:4.0.18 (Source)
Client MySQL Server:
-
Name: datac
Ritter:
What is the effect of enter the following in /etc/my.cnf:
[client]
password = mysql123
Kirt
-Original Message-
From: Jason K Larson [mailto:[EMAIL PROTECTED]
Sent: Monday, May 24, 2004 2:48 PM
To: Kirti S. Bajwa
Cc: [EMAIL PROTECTED]
Subject: Re: Restrict connection to MySQL
Hello List:
RH 9
MySQL 4.0.18
Just did a fresh Binary install of MySQL. Also installed support for
Perl/DBI/DBD:
Question:
(1) I am going to setup a MySQL Client machine on a different Server. I
notice I can't install
a Client MySQL from Binary MySQL distro. Is it correct?
(2) On a Client
Hello List:
Few days ago I posted MySQL does not automatically start at BOOT time?? on
this list. Several people responded but the problem was not resolved.
I did a fresh install of RH9 MySQL 4.0.18 (Binary) on a DUAL CPU 1.5 GB
Mem server. After reading the MySQL documentation MySQL book by
in /var/log
/usr/local/mysql and have not found any error logs for MySQL.
I sure need help!!
Thanks.
Kirti
-Original Message-
From: Paul DuBois [mailto:[EMAIL PROTECTED]
Sent: Saturday, May 08, 2004 6:44 PM
To: Kirti S. Bajwa
Subject: RE: MySQL does not automatically start at BOOT
Brian:
No. From where I copy this file from? Is it stright copy or something else?
You might be my savior!!
Thanks.
Kirti
-Original Message-
From: Brian Duke [mailto:[EMAIL PROTECTED]
Sent: Sunday, May 09, 2004 5:44 PM
To: 'Kirti S. Bajwa'; [EMAIL PROTECTED]
Subject: RE: MySQL does
to the chkconfig list
chkconfig --add mysql
chkconfig --level 345 mysql on
For more information read
http://dev.mysql.com/doc/mysql/en/Automatic_start.html
Good luck...
Sam
--- Kirti S. Bajwa [EMAIL PROTECTED] wrote:
Brian:
No. From where I copy this file from? Is it stright
copy or something
Hello List:
I have been learning MySQL. I have installed tested MySQL server 3-4 times
without problem. This time I used the an alpha-nightly snapshot and have
run into problems.
My current Installation:
--
LINUX RH9
Source Installaion:
Paul:
Did what you said. Here is the output:
% chkconfig --list mysql.server
mysql.server 0:off 1:off 2:on 3:on 4:on 5:on 6:off
What next?
Kirti
-Original Message-
From: Paul DuBois [mailto:[EMAIL PROTECTED]
Sent: Saturday, May 08, 2004 2:24 PM
To: Kirti S. Bajwa; [EMAIL PROTECTED
-Original Message-
From: Paul DuBois [mailto:[EMAIL PROTECTED]
Sent: Saturday, May 08, 2004 6:44 PM
To: Kirti S. Bajwa
Subject: RE: MySQL does not automatically start at BOOT time??
Paul:
Did what you said. Here is the response:
% chkconfig --list mysql.server
mysql.server 0:off 1:off 2:on 3
Test message.
This is a test message. I have not received any post from MySQL for two
days. I just want to make sure that this message gets back to me.
Kirti
--
MySQL General Mailing List
For list archives: http://lists.mysql.com/mysql
To unsubscribe:http://lists.mysql.com/[EMAIL
Michael:
Thanks. It did the trick.
Kirti
-Original Message-
From: Michael Stassen [mailto:[EMAIL PROTECTED]
Sent: Thursday, April 08, 2004 6:32 PM
To: Kirti S. Bajwa
Cc: [EMAIL PROTECTED]
Subject: Re: Perl Modelues
Kirti S. Bajwa wrote:
Ken:
Thank you for your response. I tried
-Original Message-
From: Rich Allen [mailto:[EMAIL PROTECTED]
Sent: Wednesday, April 07, 2004 6:02 PM
To: Kirti S. Bajwa
Cc: '[EMAIL PROTECTED]'
Subject: Re: Perl Modelues
you can install Perl modules with
$ perl -MCPAN -e shell
cpan install [module::name]
- hcir
mysql
- hcir
On Apr 7, 2004
, 2004 3:29 PM
To: Kirti S. Bajwa; [EMAIL PROTECTED]
Subject: Re: Perl Modelues
Hi Kirti,
mysql_config tell the perl build module how to link with the
driver. The easiest way to fix this is make sure the bin driectory of
MySQL is in your path. If you can type 'mysql_config' at the command
Hello List:
I have run into stone wall in figuring out installation of Perl DBI modules
with MySQL. When I review the MySQL documentation, 2.7.1 Installing Perl on
Unix,
it mentions that the easiest way to install Perl DBI is to use CPAN.
However when I go to the link provided in the
Hello List:
--
I left out the following information (sorry too much on mind):
RH 9
MySQL 0.9.3 (Installing both Server Clients
--
I have run into stone wall in figuring out installation of Perl DBI modules
with MySQL. When I review the MySQL documentation, 2.7.1 Installing Perl on
Unix,
Is InnoDB table type support included in the 5.?.? version?
Kirt
--
MySQL General Mailing List
For list archives: http://lists.mysql.com/mysql
To unsubscribe:http://lists.mysql.com/[EMAIL PROTECTED]
Hello List:
I have installed and tested freeRADIUS 0.9.3 MySQL 5.?.? (latest dev
version). Now I want to install test freeRADIUS MySQL with InnoDB
tables.
I have researched GOOGLE MySQL web site for information on installing
MySQL with InnoDB tables without success. I would appreciate if
Hello List:
After two weeks of struggling, I need help!!
My setup:
T1 to Internet Backbone
|
Cisco 26XX
12.21.237.1
-
From: Kirti S. Bajwa [mailto:[EMAIL PROTECTED]
Sent: Sunday, March 14, 2004 4:37 PM
To: [EMAIL PROTECTED]
Subject: Basic Setup Questions
Hello List:
After two weeks of struggling, I need help!!
My setup:
T1
Hello List:
I have setup MySQL and it is working fine. I tested connection to MySQL.
Now I have gone one step futher and added a password for mysql, as follows:
shell ./mysqladmin -u root password mysqlpw
Now I want to setup myc.cnf. Our SQL server is a standalone server (RH9,
Dual CPU, 1.5GB
During the last week I have asked couple of questions regarding setting up
MySQL have gotten good answers. Since my knowledge of MySQL is in the
beginer level, and I am very close to finishing up working with MySQL, I
have several questions still un answered. I will try asking one question at
a
, February 06, 2004 1:51 PM
To: Kirti S. Bajwa; [EMAIL PROTECTED]
Subject: RE: Client mySQL Server
Just went through this.
You need to install MySQL from source.
The basic commands you must execute to install a MySQL source
distribution are:
shell groupadd mysql
shell useradd -g mysql mysql
shell
up a MySQL Client machine. What other
steps I need to finish the installation? Is there any documentation which
describes MySQL client installation?
Thanks.
Kirti
-Original Message-
From: Michael Stassen [mailto:[EMAIL PROTECTED]
Sent: Friday, February 27, 2004 4:31 PM
To: Kirti S. Bajwa
, February 06, 2004 1:51 PM
To: Kirti S. Bajwa; [EMAIL PROTECTED]
Subject: RE: Client mySQL Server
Just went through this.
You need to install MySQL from source.
The basic commands you must execute to install a MySQL source
distribution are:
shell groupadd mysql
shell useradd -g mysql mysql
shell
No change. Any other suggestion?
Thanks.
Kirti
-Original Message-
From: Victor Medina [mailto:[EMAIL PROTECTED]
Sent: Thursday, February 26, 2004 7:26 AM
To: Kirti S. Bajwa
Cc: '[EMAIL PROTECTED]'
Subject: Re: Installation problem!!!
Hi!
try using the one installed in /usr/local
Hello List:
I have installed MySQL Master Server from Binaries 4-5 times without
problem. Now I am installing MySQL CLIENT from source and have run into
problem, as explained below:
Download mysql-5.0.0-alpha.tar.gz in /usr/local
% cd /usr/local
% gunzip
Hello List:
First my apology: I have previously asked this question and saved the
response. But we lost our Win NT server and all the saved data, so I ask the
same question again. I have looked in archives for the last three months and
have not been able to find my previous Q/A. I will be setting
Worked like a charm.
Thanks. You are a life saver.
Kirti
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: Tuesday, February 24, 2004 2:21 PM
To: Kirti S. Bajwa
Cc: '[EMAIL PROTECTED]'; [EMAIL PROTECTED]
Subject: Re: How to install data on a RAID HDD??
I have
Hello List:
This is the basic of the basic question. I have recently installed and
tested MySQL and am happy with it. Now I want to setup a production server.
I notice that there are two MySQL products listed on the MySQL org site (1)
MySQL (2) MaxDB MySQL.
My question is; which of these two
First of all I admit that I am not an expert of MySQL. However, during the
last three months I have TEST installed MySQL Server software and gone
through the tutorial. My next step is to setup three computers as follows:
|--| |--| |--|
|
Hello:
I have been reading MySQL Control Center. There are screen shots but I have
not been able to find documentation. Is the documentation is hidden or not
available? If there is documentation, kindly direct me to the URL.
Thanks.
Kirti
--
MySQL General Mailing List
For list archives:
Hello:
I need some advise. I am trying to learn and install MySQL, RH9 distro. My
question is about Pearl Modules:
1) Is it common to install Perl Modules?
2) If I do not install Perl Modules now, can I install later on with any big
headache?
Thanks,
Kirti
--
MySQL General Mailing List
For
Hello:
I am installing MySQL 5.0.0 (on a fresh install RH9). I am following binary
installation as outlined in official MySQL documentation with default
location /usr/local. I sure appreciate if somebody on this list is kind
enough to email or list contents of my.cnf file.
Thanks.
Kirti
--
I am trying to install MySQL from source distribution by following the
instructions under section: 2.3.1 Quick Source Installation Overview.
I notice that the configure state is listed as follows:
shell ./configure --prefix=/usr/local/mysql
which means to install the software in
all over again.
Thanks again.
Kirti
-Original Message-
From: dan orlic [mailto:[EMAIL PROTECTED]
Sent: Thursday, January 01, 2004 12:07 PM
To: Kirti S. Bajwa
Subject: Re: Installation Question
i never had much luck with the source distribution, let alone using the
prefix flag. Try
Hello List:
Here comes a newbie's newbie!!
I want to install MySQL 5.0.0 on a machine with RAID. It has the following
hardware/Software configuration:
DISTRO: RH9
1-Disk which has all the software installed.
2-Disks, which are RAID1 format with one folder /data
I plan to use the RAID for data
Thanks.
I think your help is what I needed is highly appreciated.
Kirti
-Original Message-
From: Egor Egorov [mailto:[EMAIL PROTECTED]
Sent: Tuesday, December 23, 2003 4:22 AM
To: [EMAIL PROTECTED]
Subject: Re: What am I doing wronga
Kirti S. Bajwa [EMAIL PROTECTED] wrote:
Hello
Hello List:
This is my first post you can easily figure out that I am a complete
newbie to mySQL. I have a fresh install of RH9 on a (test) server. It also
has mySQL 3.23 installed (part of RH9). My question is:
1) Considering the above setup, do I upgrade (and How?) from 3.23 to 4.0.??
2) or
Hello List:
Please point to what am I doing wrong:
I am trying to install MySQL on top of RH9. I am following steps outlined
MySQL official documentation from Section 2.3.1 titled Quick Source
Installation Overview. These are the steps I have performed:
# cd /usr/local
Download:
54 matches
Mail list logo