Hi Reindel,
you client configuration shows no indication for SSL, i see it in my.cnf
> only in the [mysqld] section and remember when you initrialize replication
> you need to specify it there too
>
> i doubt there is anything to change the logging but since you *know* what
> tha
Am 21.07.2015 um 05:03 schrieb Tim Dunphy:
I see absolutely NO indication as to why the login for the 'slave2' user
(that requires SSL) is failing
So my questions are 1) how to I bump up the verbosity on the logs so I can
get an indication as to why this is failing? 2) what is the b
Hey all,
I need to setup replication via SSL. 2 nodes master/master for H/A. Then 2
slave nodes for backup. Node 3 will slave off of node 1, and node 4 will
slave off of node 2 for redundant backups. Nodes 3 & 4 will store backups
to a directory mapped to S3 via S3FS. All nodes are phys
support anything better than DHE-RSA-AES128-SHA
> (AES256 is supported but not more secure than AES128)
>
> * no ECHDE
> * no AES-GCM
> * no SHA256
Below are commands used for cert creation :-
/opt/scr-openssl/ssl/bin/openssl ecparam -out ecc_ecdsa_root.key
Thanks for instant reply.
As suggested I tried with ECDHE-RSA-AES128-GCM-SHA256 and ECDHE-RSA-AES128-SHA
but no luck.
Created new certs for EC - configured my.cnf with new certs.
Below are commands used for cert creation :-
/opt/scr-openssl/ssl/bin/openssl ecparam -out
Am 17.03.2015 um 13:21 schrieb Bhushan Rane:
I have compiled MySQL with openssl, I am able to connect to MySQL over
SSL with TLS1.0 ciphers. But when I tried to connect with TLS1.2 ciphers
connection fails with error
MySQL / MariaDB don't support anything better than DHE-RSA-AES12
I have compiled MySQL with openssl, I am able to connect to MySQL over
SSL with TLS1.0 ciphers. But when I tried to connect with TLS1.2 ciphers
connection fails with error.
===
MySQL server version :- 5.6.23-log Source distribution
Custom OpenSSL version :- OpenSSL 1.0.1j 15 Oct
Thanks, Michael.
I used the absolute paths but it still does not work. I think the problem
is not because of the relative path because the example showed in the
manual also uses relative path (see below):
shell> *mysqld --ssl-ca=ca-cert.pem \*
*--ssl-cert=server-cert.
I had noticed that the paths to your certificates were expressed as
relative paths. I think at least part of Reindl's recommendation was to
express fully qualified paths to your certs and to examined the permissions
on those files carefully. SSL is very particular about rejecting security
Dear Reindl,
Thanks a lot for the reply!
I tried your scripts (the only difference is the openssl.cnf because I
don't have it)
Unfortunately, I still failed to start the server with the same message:
121124 17:00:06 [Warning] Failed to setup SSL
121124 17:00:06 [Warning] SSL error: Fail
Am 25.11.2012 00:30, schrieb Jackie Zhang:
> Hello everyone,
>
> I want to setup SSL for mysql server. I followed the manual on
> http://dev.mysql.com/doc/refman/5.5/en/ssl-connections.html
>
> I first generated the certificates and key files by strictly following the
> f
Hi!
Martin Gainty wrote:
> [[...]]
>
> joerg ..any thoughts on this matter??
Sorry - none.
I never dealt with the inner workings of the SSL library.
Just seeing file descriptor 2 (standard error) used for socket
operations makes me assume *very* strongly that something went wrong
we
> perhaps a misconfiguration on the failing client ..
> can you go to successful client, enable DEBUG level
> debugging and log the connection and then go to the
> failing client..enable DEBUG level debugging and log
> the connection to the failing client this would determine
> deltas between the
> Interesting that you can request advice from finland vs
> calling from redwood shores CA for technical advice
>
> first take a look at:
> http://dev.mysql.com/doc/refman/5.0/en/secure-basics.html
>
> once you've determined the algorithm you will want to implement
> Sorry, but I have to start with a negative remark:
> Why, oh why, don't you mention the version number you
> are using? I hope it is some roughly current 5.1, but
> I'd rather like you to tell it.
Doh! Right you are! Sorry, that was totally my bad.
mysql> select version();
++
| ve
Hi Tim, all!
Sorry, but I have to start with a negative remark:
Why, oh why, don't you mention the version number you are using?
I hope it is some roughly current 5.1, but I'd rather like you to tell it.
Tim Gustafson wrote:
> I have three mySQL server, all of which are SSL-enab
I have three mySQL server, all of which are SSL-enable and all of which are
generally accessible from remote clients over SSL.
However, one of my FreeBSD mySQL clients is having problems connecting to any
of the servers. Running mySQL under truss reports the following
Dear All,
I'm trying to get SSL connections
for all mysql slave and masters.
I have one box that will not use SSL for some reason.
When I start this slave it can not connect because
it's not using SSL.
show slave status\G
To me it really looks you are SSL replicating.
In my experience If you are replicating in SSL either it works or not,
I dont remember what should be there at "Master SSL Cipher",
but I remember I had clear problems when SSL replication was not working.
Claudio
2010/11/10 Paul N
Hey can anyone tell me is my slave is utilizing SSL?
I am unsure why the Master SSL Cipher is not
listed under show slave status.
Here's some info:
mysql> show slave status\G
*** 1. row ***
Slave_IO_State: Waiting for master
Dear All,
I just want to verify my rep slave is using ssl.
When I run this command mysql> \s
I get:
mysql> \s
--
mysql Ver 14.12 Distrib 5.0.77, for redhat-linux-gnu (x86_64) using readline
5.1
Connection id: 5
Current database:
Current user: r...@loc
On 18.08.2010 20:42 CE(S)T, Mark Matthews wrote:
> For what it's worth, the MySQL JDBC driver has had client-side SSL
> require (i.e. "requireSSL=true") since 2003 and the ADO.Net driver
> has had "SSL Mode=Required" since 2009.
Cool, so would it be possi
On Aug 18, 2010, at 1:34 PM, Shawn Green (MySQL) wrote:
> On 8/18/2010 2:22 PM, Anders Kaseorg wrote:
>> On Wed, 18 Aug 2010, Shawn Green (MySQL) wrote:
>>> If the server specifies REQUIRES SSL then that client cannot connect
>>> without going through the full SSL val
On 8/18/2010 2:22 PM, Anders Kaseorg wrote:
On Wed, 18 Aug 2010, Shawn Green (MySQL) wrote:
If the server specifies REQUIRES SSL then that client cannot connect
without going through the full SSL validation process. This means that
Mallory would need to present the same security credentials
On Wed, 18 Aug 2010, Shawn Green (MySQL) wrote:
> If the server specifies REQUIRES SSL then that client cannot connect
> without going through the full SSL validation process. This means that
> Mallory would need to present the same security credentials that Alice
> has in order to
On 8/17/2010 6:13 PM, Yves Goergen wrote:
... snip ...
(Oh look, the "MySQL" guy already has an oracle.com e-mail address...)
And for a for about two years before that, I had a sun.com email
address, too. MySQL has not been an independent company for quite a
while. Google it if you don't b
On 8/17/2010 6:02 PM, Anders Kaseorg wrote:
On Wed, 2010-08-11 at 14:23 -0400, Shawn Green (MySQL) wrote:
On 8/9/2010 5:27 PM, Yves Goergen wrote:
What's that supposed to mean? If there's no way to force the connection
into SSL, it is entirely useless. Anyone on the wire could simp
On Wed, 18 Aug 2010, Yves Goergen wrote:
> Since MySQL is now Oracle […]
Yves, I think we should be treating this security issue seriously, and
working with Shawn and the MySQL team towards solving it constructively,
instead of just taking potshots at their new company.
Anders
--
MySQL General
To solve it, there needs to be a
> way to force the use of SSL from the client side.
I have another suggestion: remove SSL support from MySQL alltogether and
declare the protocol as unsafe and only use it over secure networks like
VPN.
Since MySQL is now Oracle and it's not Oracle's main b
On Wed, 2010-08-11 at 14:23 -0400, Shawn Green (MySQL) wrote:
> On 8/9/2010 5:27 PM, Yves Goergen wrote:
> > What's that supposed to mean? If there's no way to force the connection
> > into SSL, it is entirely useless. Anyone on the wire could simply
> > pretend that
On 8/9/2010 5:27 PM, Yves Goergen wrote:
Does anybody know how to use SSL-secured connections to a MySQL server?
Has anybody done that at all?
In the manual I have now found the following statement:
http://dev.mysql.com/doc/refman/5.1/en/ssl-options.html
Note that use of --ssl does not
Does anybody know how to use SSL-secured connections to a MySQL server?
Has anybody done that at all?
In the manual I have now found the following statement:
http://dev.mysql.com/doc/refman/5.1/en/ssl-options.html
> Note that use of --ssl does not require an SSL connection. For
> example,
Hello,
I have setup a MySQL 5.1 server on Ubuntu Linux 10.4 and created an SSL
certificate and key. I updated the MySQL configuration to point to the
SSL files. There's no error message at startup in MySQL's error log.
(Before I granted the process access to the SSL files through AppAr
to MySQL 5.1.
Specifically if the source is the MySQL manual, there is absolutely no
reason to use the 5.0 manual when you are dealing with 5.1, there is a
5.1 manual available.
>
> Would be nice if someone on the list with prior experience would
> comment
Discussing SSL: it is included with curr
information on setting up
SSL on Windows ?
Neil
--
MySQL General Mailing List
For list archives: http://lists.mysql.com/mysql
To unsubscribe:http://lists.mysql.com/mysql?unsub=arch...@jab.org
Hi
I found this documentation. However, I need more information on setting up
SSL on Windows ?
Neil
On Wed, Jul 21, 2010 at 3:39 PM, wrote:
> Google?
> http://dev.mysql.com/doc/refman/5.0/en/replication-solutions-ssl.html
>
> This is for MySQL 5.1, I imagine its probably the sam
and Windows 2003 with
MySQL 5.1.46. Normal master to master replication between the two server is
running fine. However, we now want to set-up the replication with SSL to
ensure that all data which is replicated both ways between the two servers
is encrypted. Currently on the Ubuntu 10.04 server
Hi,
We are running Ubuntu 10.04 LTS with MySQL 5.1.46 and Windows 2003 with
MySQL 5.1.46. Normal master to master replication between the two server is
running fine. However, we now want to set-up the replication with SSL to
ensure that all data which is replicated both ways between the two
-basics.html
--
Muhammad Subair
On Thu, Oct 8, 2009 at 6:03 PM, Tompkins Neil > wrote:
Hi
I wondered how you are getting on with installing SSL for mysql 5.1
server.
We are looking to install it too. Do you have any pointers/
recommendations
?
Regards
Neil
On Tue, Sep 8, 2009 at 11:36 PM, qt4
w you are getting on with installing SSL for mysql 5.1 server.
> We are looking to install it too. Do you have any pointers/recommendations
> ?
>
> Regards
> Neil
>
> On Tue, Sep 8, 2009 at 11:36 PM, qt4x11 wrote:
>
> > I'm trying to set up my mysql 5.1 se
Hi
I wondered how you are getting on with installing SSL for mysql 5.1 server.
We are looking to install it too. Do you have any pointers/recommendations
?
Regards
Neil
On Tue, Sep 8, 2009 at 11:36 PM, qt4x11 wrote:
> I'm trying to set up my mysql 5.1 server to work over ssl, I
I'm trying to set up my mysql 5.1 server to work over ssl, I'm following the
directions at http://dev.mysql.com/doc/refman/5.0/en/secure-connections.html.
I've confirmed that my server supports ssl
mysql> SHOW VARIABLES LIKE 'have_ssl';
+---+
Hello there,
I am getting connected to MySQL through SSL.
I want to see the logs of SSL getting trigerred when someone access MySQL
database from any application or URL.
Where do I need to modify or edit the configuration, in order to see the SSL
logs?
I can only see the query logs as of now
Hello there,
I have setup SSL for MySql server. I can login into mysql by mentioning the
root CA cert.
On the other side, I have a Directory Server URL, which is trying to access
the MySQL.
I have updated the query logs. Wherever a connection happens from the
directory server to the
MySQL
Hi,
Is there someone who is able to connect to an MySQL instance
connection via ssl,
from a client located on a different server than where is the MySQL
instance,
using the only option --ssl-ca ?
I'm not able, I can only connect if I use the options --ssl-ca, --ssl-
cert and --ss
Hi Andy,
I used the same user.
I list the steps that I made:
on the server MySQL (10.43.249.17) I created the user:
GRANT ALL PRIVILEGES ON *.* TO 'pippo'@'%' IDENTIFIED BY '*';
then, on the same server:
mysql --ssl-ca=/root/openssl/cacert.pem -u pippo -p
local one
doesn't, that would explain it.
What are your MySQL versions on both your server and remote client?
What errors do you get on your client?
Regards,
Andy
Stefano Elmopi wrote:
Hi,
I'm trying to make connections ssl.
I followed the MySQL guide and I've configur
Hi,
I'm trying to make connections ssl.
I followed the MySQL guide and I've configured the server
then I created a normal user, without the REQUIRE SSL.
On the same server can connect with the only option:
mysql --ssl-ca=cacert.pem -u Pluto -p
but if I try to connect from anoth
Hi Seth,
I implemented SSL successfully just a couple of weeks ago on 5.1.30, and
I too found some aspects confusing. Here's my answers from my own
experience so please forgive me if they're inaccurate.
1) On the server side, I believe ssl-ca, ssl-cert and ssl-key are all
r
Howdy,
I've read through all of the MySQL docs on SSL and I just need a brief
overview of a few things to understand some things that aren't crystal
clear to me since I'm not very familiar with SSL.
1) Which SSL options are *required*?
It seems that only ssl-key is _alway
I have a few questions about the parameters for SslOption/mysql_ssl_set
( C++/C ) and about SSL in general between the server and the client.
I do understand what a certificate, a private key, and a public key is
in general but I am having trouble understandng how they work in MySql.
1) Are the
I have a few questions about the parameters for SslOption/mysql_ssl_set
( C++/C ) and about SSL in general between the server and the client.
I do understand what a certificate, a private key, and a public key is
in general but I am having trouble understandng how they work in MySql.
1) Are
In the MySql manual section 5.5.7.2 it specifies how to build MySql on a
Unix/Linux platform with SSL by using 'configure'. I need to build MySql
for Windows with SSL support. In section 2.4.15.6.1 for building MySql
for Windows itr specifies the available options for using win/confi
can you please share how you have solved that?
Did u use mysql -u root -p --ssl when connecting?
Regards,
Chandru
www.mafiree.com
On Fri, Dec 12, 2008 at 1:15 PM, Moon's Father wrote:
> I have solved this problem.
> ^_^
>
> On Fri, Dec 12, 2008 at 10:54 AM, Moon's Fa
I have solved this problem.
^_^
On Fri, Dec 12, 2008 at 10:54 AM, Moon's Father
wrote:
> Hi.
> I want to know how to connect mysqld with ssl encryption from windows or
> linux system.
> Any reply will be appreciated.
>
> Here is my status.
>
> mysql> status
>
Hello,
I just started playing around with SSL enabled connections to the MySQL
server, and so far I got everything working except that the SSL_CIPHER
variable always stays empty.
First I created a CA cert+key pair, then both a MySQL Server and Client
cert+key pair, both signed by the CA cert.
I
there any flags i can change in the Makefile for the mysql build?
does it have to be a 'shared'? static?!
thanks...
kalin m wrote:
hi all...
i just installed openssl 0.9.8h and trying to build mysql 5.0.51b with
it on a freebsd 7 machine. i get this:
/usr/bin/ld: /usr/lo
hi all...
i just installed openssl 0.9.8h and trying to build mysql 5.0.51b with
it on a freebsd 7 machine. i get this:
/usr/bin/ld: /usr/local/ssl/lib/libssl.a(t1_srvr.o): relocation
R_X86_64_32 can not be used when making a shared object; recompile with
-fPIC
/usr/local/ssl/lib/libssl.a
Hello,
I'm trying to set up SSL for my MySQL server. As my understanding of
SSL is still a bit shaky and the MySQL documentation on the subject a
bit terse, I thought I'd ask a few questions to make sure I haven't
misunderstood anything:
1. Is the --ssl-ca option to mysqld the pub
Actually I fixed the problem by generating a whole new set of SSL
certificates!
Thanks for the help!
Regards,
Samy
[EMAIL PROTECTED] schrieb:
Hey,
This morning the default timespan of ssl certificates took my servers
down...
Everything was running fine, but this morning the SSL encrypted
Hey,
This morning the default timespan of ssl certificates took my servers
down...
Everything was running fine, but this morning the SSL encrypted MySQL
connections stopped working!
Then I realized that the Problem was, that the certificates ran out this
morning.
The first solution that I
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
It is unfortunate that mysql does not offer a binary version with ssl
support for Linux. Does anyone know why? It can't be for export reasons,
as they do offer a windows version with SSL support.
Aaron Cannon
- --
Skype: cannona
MSN/Wi
Chris White wrote:
Duncan Hutty wrote:
I attempted to build 5.1.14-beta with ssl support and it failed
(output below).
It builds quite happily on this system without the ssl support
parameter to configure. Since it appears to fail in an area (timezone
system) that to me seems rather
Duncan Hutty wrote:
I attempted to build 5.1.14-beta with ssl support and it failed
(output below).
It builds quite happily on this system without the ssl support
parameter to configure. Since it appears to fail in an area (timezone
system) that to me seems rather unrelated, I wondered if
I attempted to build 5.1.14-beta with ssl support and it failed (output
below).
It builds quite happily on this system without the ssl support parameter
to configure. Since it appears to fail in an area (timezone system) that
to me seems rather unrelated, I wondered if something odd was afoot
Is it possible to require both secure connections and x509 verification
on a replication user? If so, what's the syntax? I couldn't find
references to this use in the manual, lists or bug tracking system.
Using mysql 4.1.21
10x,
Amit
--
MySQL General Mailing List
For list archives: http://lists.m
Hi.
mysql --version
mysql Ver 14.7 Distrib 4.1.21, for pc-linux-gnu (i686) using readline 5.1
I'm trying to secure a replication connection between a master and a
slave. However, seems to me that the issue I'm facing relates to any SSL
client<->server connection, so the
enable client connections over SSL to support secure
offsite replication, however it seems the prebuilt binaries do not
have the SSL option built in. So I guess I need to build MySQL from
source with the SSL option. I have not found too much in the MySQL
Manual or via Google, Has anyone got a
Hi,
How can I connect from a Windows client (VB/ODBC Connector) to a MySQL
Server 5.0.22, also running on Windows (Max version installed as a
service using Local-Service Account) with all tables using InnoDB
storage engine USING SSL? Perhaps using OpenSSL on a Linux-based
installation would be
Hi,
I am using 5.0.22 on Windows. As I read in the reference manual,
almost "ALL" SSL values/options are specific to 5.1.x versions. Do I
stand _ANY_ chance to use SSL anyway? Specifically, I want to know
exactly HOW I can enable SSL support for MySQL on Windows using which
options,
On 31.05.2006 14:46 (+0100), Paul DuBois wrote:
> --ssl on the client side (mysql) isn't sufficient to enable an SSL
> connection, as stated in the manual. That's why Joerg indicated the
> use of the other options.
Why do I need to provide the client with a certificate? I do
On 31.05.2006 12:47 (+0100), Joerg Bruehe wrote:
> I said I am no SSL expert, I just go by this quote from the manual:
Yes, I saw that. But it doesn't apply on Query Browser because there is
no such option available in the UI.
Btw, I cannot connect to MySQL5+SSL with Query Browser/Win b
rver which
does not support SSL, or does not have it switched on (lacks a certificate).
Below was *after* I enabled SSL in the server. *before* there was no
warning but an unencrypted connection.
Yes, I got that - so you desire the client to inform you if it has to
use an un-encrypted
On 31.05.2006 10:21 (+0100), Joerg Bruehe wrote:
> According to your description below, where you got "Could not connect
> ...", you are given this warning if establishing the connection fails.
> So the remaining case is a client trying to connect to a server which
> do
k that the client should actually inform me when I select
"use SSL" and it doesn't.
By some kind of information / warning after you had selected that
button, the client tried, and the connsection did not get established.
Yes, I understand that desire.
According to your description be
actually inform me when I select
"use SSL" and it doesn't.
Now I think I managed to make MySQL 5 accept SSL connections, at least
that have_openssl variable has turned from DISABLED to YES. I added an
SSL certificate to the my.cnf file. But now I can only connect to the
server from Quer
Hi Yves, all!
Yves Goergen wrote:
On 21.05.2006 00:16 (+0100), Yves Goergen wrote:
Hello,
I'm using MySQL Query Browser on Windows XP to connect to a remote MySQL
4.0 and 5.0 database server, both on Linux. In Query Browser, I can
check the options "Use SSL if available" but h
On 21.05.2006 00:16 (+0100), Yves Goergen wrote:
> Hello,
> I'm using MySQL Query Browser on Windows XP to connect to a remote MySQL
> 4.0 and 5.0 database server, both on Linux. In Query Browser, I can
> check the options "Use SSL if available" but how do I know if it
Why am I suddenly getting huge volumes of mail about SQL? What forum is
this, and how do I get out of it?
++
Phil Robbins
Auckland
New Zealand
++
_
Discover fun and games at @ http://xtramsn.co
On 21.05.2006 07:35 (+0100), paul rivers wrote:
> Are you certain? Which version are you running?
I don't have it on MySQL 4.0 and on MySQL 5.0 it has the value "0" so I
guess it's not connecting through SSL.
--
Yves Goergen "LonelyPixel" <[EMAIL PROTECTE
On 21.05.2006 00:38 (+0100), paul rivers wrote:
> - Inspect the 'show status' variable of Ssl_accepts after a connection
> attempt on an otherwise quiet mysql instance.
I have no such status variable in my server.
--
Yves Goergen "LonelyPixel" <[EMAIL PROTECTED]>
http://beta.unclassified.de – My
, May 20, 2006 3:39 PM
To: 'Yves Goergen'; 'List: MySQL'
Subject: RE: How to find out about SSL connection?
I've wrestled with the same question. The only options I came up with were:
- Do as you suggest and require SSL for the account.
- Inspect the 'show status&#x
I've wrestled with the same question. The only options I came up with were:
- Do as you suggest and require SSL for the account.
- Inspect the 'show status' variable of Ssl_accepts after a connection
attempt on an otherwise quiet mysql instance.
- Sniff the traffic between cl
Hello,
I'm using MySQL Query Browser on Windows XP to connect to a remote MySQL
4.0 and 5.0 database server, both on Linux. In Query Browser, I can
check the options "Use SSL if available" but how do I know if it is
available and used? I couldn't find any SQL command to sh
I'm trying to set up SSL connectivity to a Fedora Core 4 server running
mysql-server-4.1.16-1.FC4.1 and not having much success. I keep getting
ERROR 2026 (HY000): SSL connection error
no matter what I do.
I followed the directions on
http://dev.mysql.com/doc/refman/4.1/en/secure-c
Hello.
When running our benchmark tests using secure connections (all data
encrypted with internal SSL support) performance was 55% slower than
with unencrypted connections. See:
http://dev.mysql.com/doc/refman/5.0/en/compile-and-link-options.html
Khalid Hanif wrote:
> Hi Guys,
>
Hi Guys,
What sort of overheads am I expecting to get when running MySQL
5.0.18 in SSL mode? I need to decide whether to run MySQL in SSL
mode, or use CIPE (on RHEL 3).
Thanks,
Khalid
--
MySQL General Mailing List
For list archives: http://lists.mysql.com/mysql
To unsubscribe:http
Hello,
I am trying to ensure replication between master and slave is using
ssl. I followed the instructions in section 6.4 of the reference guide
and simply added REQUIRE SSL to the end of the grant statement when
creating the replication user. Replication works when I don't require
Hello.
First check the contents of /var/log/messages. SELinux usually puts
there some notes about what it is doing. I'm not a SELinux expert, but
quick search at fedora.redhat.com has shown me that I should use
system-config-securitylevel utility for configuring SELinux.
Israel Ferná
Previous Message
>
> >From: Israel Fernández CabreraDate: October 17 2005 10:18pm
>
> >Subject: SSL connection error
>
> >Get Plain Text
>
> >
>
> >Hi all
>
> >
>
> >I'm back with a new subject may be the last o
L General Discussion« Previous Message
>From: Israel Fernández Cabrera Date: October 17 2005 10:18pm
>Subject: SSL connection error
>Get Plain Text
>
>Hi all
>
>I'm back with a new subject may be the last one was not attractive :)
>I'
etc/my.cnf file with the ssl-ca, ssl-cert and ssl-key for the
client and the mysqld sections of the my.cnf file.
My problem is that mysqld log an error describing that it has no
permission to read the certificate file, I've been with this for more
than 3 days.
I'm attaching ls output, my.
Hello.
>The fact is that I cant start mysql with ssl support using the
>/etc/ec/d/init.d/mysql script. But the interesting thing is that if I copy
First of all, you should find the error log. See:
http://dev.mysql.com/doc/refman/4.1/en/error-log.html
Israel Fern$ndez Cabrera &
MySQL daemon runs by the way,
but without SSL support, mysqladmin tests return SSL connection error too...
On 10/13/05, RedRed!com IT Department <[EMAIL PROTECTED]> wrote:
>
> Israel Fernández Cabrera wrote:
> > Well I've done more than that I wrote a custom init script wi
Well I've done more than that I wrote a custom init script with the simplest
possible start function containig just the following line:
/usr/bin/mysqld_safe &
and SSL does not work eather... please help...
best regards
Israel
-- Forwarded message --
From: RedR
Hi folk!
I'm new to mysql and to databases...
I'm using Fedora Core 4 with mysql 4.1.11-2 I need some application clients
to connect the server using SSL connections. I've created and tested x509
certificates using the way mysql documentation explain, I've modified the
/etc
Even I had the same problem and couldnt use SSL on
windows.
The developers have legal issues when using SSL on
windows. I think there is some development going on
using CryptoAPI but I am not too sure.
My advice, dont even try on Windows. Atleast it was a
big pain in ass for me.
Karam
--- Jose
Dear all,
I need SSL support for MySQL. I've checked the documentation and it
seems that for windows there is no SSL support in the binaries. In
addition the documentation in the examples is for Linux.
Has anyone has used MySQL with SSL in windows? If so ... how? How easy
is to set it up?
'm kind of new to the SSL scene.
> I've read all I can find on MySQL.org about setting up and using SSL.
>
> I'm on MySLQ 4.20 and have built mysql after configuring with --use-vio
> and --use-openssl. HAVE_OPENSSL = YES. I can handle setting up the
> user t
I'm kind of new to the SSL scene.
I've read all I can find on MySQL.org about setting up and using SSL.
I'm on MySLQ 4.20 and have built mysql after configuring with --use-vio
and --use-openssl. HAVE_OPENSSL = YES. I can handle setting up the
user talbe and GRANTS to require SS
1 - 100 of 270 matches
Mail list logo
