>>Sounds like exactly the same problem as the one I'm having. Just one
>>question, does this happen
>
> to your live tv from HD-3000 and recordings while watch other recordings from
> HD-3000?
>
>>DS
>
>
> Actually I havn't even tried that scenario yet. My guess is that it would
> cause the
Justin Hornsby wrote:
> I fully understand the issues brought about by the miracle of overscan
> - infact I think I even remember pointing it out to somebody a long
> time ago.
>
Probably to me ;)
> I've made a classic mistake in not practising what I preach, but I aim
> to put this right event
>
>
>>Finally, AVIA claims that I have less than 5% overscan. Even with
>>that little, the Watch Recording screen barely fits -- I can only see
>>half of the up/down arrows.
>
>
> This will require you to adjust the GUI size in 'appearance' setup.
> Either that or I'll need to rework all the
I have been running mythtv for almost two years now and until
recently everything has been fine. It seems that in the last few
months, when I playback HD content on the frontend it will seem to
skip a few seconds and show mpeg noise on the screen. When the
backend starts recording, it gets
On my screen most of the screens with boxes or selections are right
at the left of the screen and are getting chopped off due to over-
scan. The placement of the menu and the mythTV logo are perfect. The
Watch Recordings, Guide, Video Manager, etc the left side gets
chopped off. When I was w
How do I get the background that is shown on the main pages of the
wide theme examples on your website? Mine is like the one on the
'Watch Recordings' screen for everything where it is mostly black
with a grey bar at the top and bottom. I like the one that is shown
with the grey / black gra
Regarding MythMusic, I'll refrain from saying anything as I have
nothing nice to say. If there are users out there who listen to a lot
of music (as many hours/day as TV) and use MythMusic, I implore them
to come forward and share their success stories.
I don't know what you mean by success
Hi-
My mythtv system has 1xPVR-350, 1xPVR-500 using ivtv 0.4, and a newly added
DViCO FusionHDTV 5 Lite using DVB drivers. 1x200GB seagate+1x300GB seagate
HD LVM with XFS for /video and 1x40GB seagate for FC4 OS. I have DMA
enabled. DVI out via fx5200 at 1280x768. Chaintech nforce2 mobo, AMD290
Matt wrote:
On 1/28/05, James Armstrong <[EMAIL PROTECTED]> wrote:
I don't know how many people here are using Vonage for phone service. I
have a perl script I hacked up that monitors the sip traffic to the
vonage phone and alerts my mythfrontend via mythnotify to the osd when
Justin Hornsby wrote:
Right. New screenshots at
http://homepage.ntlworld.com/justin.hornsby2/images/new/
And there's a new archive here:
http://homepage.ntlworld.com/justin.hornsby2/images/new/ProjectGrayhem.tar.bz2
Has this gone away? I am playing catch-up and just get a 404, page not
Nevermind, I found another version in the path before the new java.
- James
James wrote:
g reports appreciated.
Looks good except all I get is (using java from link):
Exception in thread "main" java.lang.UnsupportedClassVersionError:
mythrecommend
s/Main (Unsupported major.minor version 48
Neil wrote:
Hi All,
I've just finished coding up a little Java utility that allows you to
create and store a list of words or phrases of things that you would
normally be interested in watching. You can then search the EPG, and any
program that contains any of your phrases in either the title,
Darren Hart wrote:
Also, whenever I fast forward or skip forward the playback will stop.
The info says play, but it isn't. I have to press Pause twice to get it
to start playing again. While it completely freezes only occaisionally,
it always enters this weird play/pause state.
--Darren
The scripts assume that the original files are mpeg2 in a DVD comaptible
resolution (720x576 for pal and 720x480 for ntsc; 704x576 and 704x480
are also mentioned in the standard and should work, as should a few
low-res settings).
Transcoding differet formats is on the radar for the scripts, but n
After reading this thread, I realized that Zap2it didn't send me an
e-mail notification that my subscription was going to expire. Anybody
else? It expires today. Thanks!
When your subscription expires depends on when you last completed a
survey, so it's different for each user.
You can fin
This version uses projectx for remux and commercial cutting. Cutting is
NOT frame accurate, projectx rounds to the nearest GOP. Avidemux2 (which
was used for cutting previosuly) doesn't round - it just produces broken
output files if your cutpoints aren't on a Keyframe.
Requirements:
- projectx
I have noticed similar issues on my ATSC / QAM MythTV box. When
deinterlacing is on, I get weird effects on the OSD. I also see
effects on progressive content (720p stations, like Fox-HD, ABC-HD,
and ESPN-HD).
I had assumed that the de-interlacing would adapt to the video source,
and turn off
http://www.thearmstrongs.org/mythtv/background.jpg http://www.uwsp.edu/it/telecomm/utdlr/tutorials/tvgraphics/fortv.htmhttp://scanline.ca/overscan/-- bjmI read the article. From what I read the main point I think you are trying to show is there needs to be a larger area around the background where
On Jul 10, 2005, at 10:01 AM, James Armstrong wrote:
I have started a new wide format theme for mythtv. I have the main
menus done. That was the easy part. I have to work on the other
screens now. That will take longer. I am calling this theme
GreenFlare-wide. I don't know if I am
I have started a new wide format theme for mythtv. I have the main
menus done. That was the easy part. I have to work on the other
screens now. That will take longer. I am calling this theme
GreenFlare-wide. I don't know if I am going to do any custom
watermarks yet. I used the icons from t
Chris Petersen wrote:
I have mythcommflag run automatically after every recording. From
"watch recordings" I can go into edit mode, hit "z" and here they are,
commercials. If I do this, I can run nuvexport-mpeg2cut --cutlist. But
if I don't load commercials in the edit list, nuvexport says "No
I used to be able to rip audio CD's from mythfrontend. Now it detects
the cd being inserted and takes me to the Optical disk menu and I select
Import CD. From there is shows me the correct CD cddb information and
the tracks, but when I click Import it hangs. The frontend is showing:
cannot get
Overall my wife is marginally happy. She is terrified to touch it
because it crashes every time, well almost every time. So for me it
is
going to take time to get her more confident using it. Again, I
must
be the only dumbass on the list.
Nah, I'm a dumbass too... just an inventive one
Daniel Segel wrote:
Yeah, I initially found it strange as well, and the opposite of what I
expected, but now I'm used to it.
Still, if it were easy to reverse them then I would.
Daniel
Xiaotian Sun wrote:
Hi,
Is it just me or other people also find it counter-intuitive to bind
Up key to
On May 21, 2005, at 4:11 PM, Brad Templeton wrote:On Sat, May 21, 2005 at 12:26:35PM -0400, Michael T. Dean wrote: One reason that I haven't yet purchased a high-definition TV is the fact that TV's being sold today do not fully support the ATSC standard. Whereas the maximum resolution allowable in
There was a lot of talk about using ProjectX a while back, and I am
pleased with the way it is working. THe only thing missing, is to get
it to use the Myth cutlists. I guess the basis is that I don't
understand what units the cutlists are stored in...
In any case, I did this, with lots of bash m
Another time the backend dies is if I've been using Mythweb, that seems to
cause more crashes than it's sometimes worth (though I do prefer using
Mythweb to locate shows that I want to record).
does mythweb make the backend die for you
only on the recorded_programs screen or on other screens as we
Does anyone have the problem of the theme scaling getting messed up
after a crash on the frontend? My X starts at 1920x1080i then
mythfrontend is set using xrandr to change the menu to 888x508. If
mythfrontend crashes or if it hangs and I restart X I run into the
problem where mythfrontend star
Thomas Börkel wrote:
HI!
Can I run commflagging of a show on another machine than the backend,
that recorded the show?
If yes, is that also true for realtime commflagging?
Why would I want to do this? Because I have another machine, that has
more horse power than my backend.
Thomas
I know you
Basically, the software runs as root on all your backends. It can
monitor free disk space, EPG data remaining, tuner status (in-use or
free), and job status (mythtranscode, mythcommflag, etc). The program
gets its settings from 4 new tables (which will soon be controlled via
MythWeb), and stor
David Shay wrote:
I have some HDTV-capable frontends and some non-HDTV capable frontends. I
would like to setup a "record all showings on this channel" entry for a
series, one for the HD channel and one for the SD channel, thereby getting
two non-duplicated versions of every episode, one in HD an
Shawn Asmussen wrote:
I'm still experiencing problems in 0.18 with mythweb causing the
mythbackend process on my master box to die. The simplest way for me to
make it break, is to try and delete a recording. I deleted 5 or 6
programs using mythweb after upgrading to 0.18, and each attempt cau
Calvin Harrigan wrote:
Does anyone here using dishnetwork notice a vertical black band on the
right side of the screen when recording with a PVR-250?
I recently move from cable to dish and everything went off with out a
hitch, even lirc worked the first time through. The only problem is a
blac
Ideally I would like to see all 3 options eventually. Option 1 is nice
if you just want to get an entire overview of recommended shows. Option
2 is what I originally had in mind, but Option 3 seems to make a lot of
sense too. Either option 2 or 3 would be a great start.
The mythrecommend script at
are not working on the digital out. It works fine using the analog IE:
using the myth volume up and down changes the level. But when I use the
digital I get the full volume and no way to control it.
I'm thought S/PDIF is always at maximum volume (or better: there is no
volume). At least my EPIA i
I have been running cvs for some time now and just updated from end of
march to cvs as of April 8th. Now playback is not working well at all.
When I first start a show the total time of the recording is something
like 318:00:00, and if I pause it then unpause it shows 58:00, then it
keeps chang
I had something happen three times recently that has not happened in the
past. I am using XRandr to change resolutions. The main gui is 888x508
or something like that. If mythfrontend crashed or goes away it gets
stuck in thinking the screen is bigger than it really is. When I restart
mythfront
J. Scott wrote:
Bingo, Todd- Thanks a million!
Here are the steps I took, for the benefit of others...
1. I removed all of the lirc references from my modprobe.conf file
2. I edited one line in /etc/init.d/lircd (approximately the 10th line)
I replaced the line:
daemon lircd $LIRC
Ian Campbell wrote:
On Mon, 2005-03-28 at 10:34 -0800, Brad Templeton wrote:
I suspect a better behaviour when you hit End (Skip to next commercial mark)
if there is no next mark (or the next mark is end of program) to not seek
at all, giving a message like the not-flagged message. The user can
Mario L wrote:
500tb seems like quite a bit of space, does autoexpire ever run for you?
The questions:
1) Do I need a powerhouse frontend to display HDTV streamed from the backend
over gigabit ethernet? I was hoping to get away with a modest CPU to keep
the box cool.
2) Any issues with my choice
Larry Sanderson wrote:
I'm hoping to put together my dream system in the next couple of weeks. It
will look like this:
Home built backend
- Athlon 64, 3800
- 2GB Ram
- Lot's of hard-drives (4x250M = 1TB)
- WinTV PVR 150
- pchdtv HD-3000
A fanless frontend from www.hushtechnologies.com
The questi
Mark L. Cukier wrote:
I just switched from my nVidia TV-out back to my PVR350. The TV Quality
is much better... however, now I seem to be having this same problem!!!
I have a thin blue line down the rightside of my screen, with a thicker
black (dead) area to the right of that. overscan doesn't
Jim Oltman wrote:
Where is this written up at?
Vincent K. Britton wrote:
They are around $600 - $999. While that is expensive, its all relative
when you consider that a DirecTV receiver with Tivo is $999.
Vince
Subject: Re: [mythtv-users] record HDTV over Satellite is now possible?
There is a lo
Vincent K. Britton wrote:
They are around $600 - $999. While that is expensive, its all relative
when you consider that a DirecTV receiver with Tivo is $999.
Vince
Subject: Re: [mythtv-users] record HDTV over Satellite is now possible?
There is a lot of information about these boxes at the a
Matt S. wrote:
I think this is great! It's funny because just the other day I was
thinking "I wish I could edit cutlists via the web interface"... what
timing! I'm not saying this should be a replacement, as it'll always
be easier to do this at the machine, but for quick jobs where you want
to d
I have a hackjob (don't know much about php) attempt at the beginnings
of a cutlist editor. It is far off right now. If a show on the
Recorded_Programs page has been commercial flagged it will have a link
to a commercial cutlist editor. It shows a bargraph showing where the
commercials are mark
James,
I agree with your order statement. I have however seen the today
forecast recently. It seems the forcast it shows in that place may be
time dependant. Late in the day Like after 6PM it seems to show the
forcast for tomorrow. Much earlier than that and I get today's
forecast? Maybe there is
Am I crazy, or is MythWeather missing what I would consider an important
piece, today's forecast? I see the current temperatures/conditions, but
nowhere does it show today's High and Low temperatures, if there will be
showers later, etc. It has this for "Tomorrow", and then the extended
forec
On Mar 9, 2005, at 9:41 PM, Jarod Wilson wrote:
On Wednesday 09 March 2005 18:21, Bryan Halter wrote:
How else are you going to run the setup utility? Until someone
writes
something like an ncurses-based setup utility, I think folks are
SOL.
[...]
Would a ncurses based mythsetup be out of the que
I did some more testing since I posted this and found if I
activate/deactivate programs from the scheduled recordings page it also
crashes. How does mythweb communicate? Does it interact with the DB
directly or does it talk to the backend?
I was able to crash the backend again with verbose loggi
Will Dormann wrote:
Bryan Halter wrote:
I'm running mythweb on a remote machine (not the masted backend), when
I delete a program through mythweb it crashes the master backend. Any
suggestions?
Are you running 0.17?
Did 0.16 have the same problem?
-WD
This has just started happening to me also
Ivor Hewitt wrote:
Peter Valdemar Morch wrote:
john roberts homepagez-at-lycos.com |Lists| wrote:
I'm surprised I haven't seen this posted yet - but from google-ing
around I found there is a new encryption method being used on some of
the latest movies. This seems to prevent libdvdcss (1.2.8) fro
Andrew Gallatin wrote:
Andy Rabin [EMAIL PROTECTED] wrote:
I've been seeing this as well. I did a search on the forum, and found
similar problems that seemed to be fixed by doing an error check on
the mythconverg database, and then re-commercial flagging the shows.
After doing all that, my proble
While I'm writing, I have a wishlist request: it'd be nice to be able
to have the automatic skipping start 1 or 2 seconds after the
beginning of the commercial (the number should be configurable and
could default to zero, or course). The reason is that sometimes the
skips are so perfect that I c
Dan Wilga wrote:
I have two Dish 311 receivers. Rather than deal with an IR blaster that
either requires an ugly LED attached to the two units, or a blaster that
is subject to interference, I made a really cheap (about $15) hardware
modification that allows me to make a hardwired connection dire
I tried that and could not get it to work. Transcode had problems. As
it is I think that code really wasn't ready to be fully released.
Hopefully someone will get it there sometime.
I just looked at the mythtranscode code and it looks like support for
MPEG2 to MPEG2 is still there. I haven't
I remember way back in the days, I think .13, .14 when I first started
with MythTV, there was a setting in Transcoders to go from MPEG2 to
MPEG2. I used it all the time because I wanted to archive to DVD's.
Somewhere around .14 it was removed. I think you can still hack the
database and change it
Myth needs the functionality to cut commericals from Mpeg 2 and keep
the format Mpeg 2, but if you've perused the developer list some
you'll find that quite a few have taken quite a stab and it and have
not been able to achieve solid results. This problem is a tough nut
to crack. I believe an int
Nate Carlson wrote:
I'm still playing with my new Air2PC card; I get rather frequent errors
in recordings with it that I am fairly sure are due to my PCI bus being
overloaded (7 hard drives in software RAID5 plus the Air2PC card don't
seem to be a good combo!). In any case, until I get that pro
Tom E. Craddock, Jr. wrote:
James Armstrong wrote:
Neil wrote:
Hey guys,
I'm using Air2pc card to capture OTA. I'm really wondering why almost
half of the channels are showing as Unknown in Program Guide. Also
when I watch those channels that are labeled Unknown in Watch TV, and
I pr
Neil wrote:
Hey guys,
I'm using Air2pc card to capture OTA. I'm really wondering why almost
half of the channels are showing as Unknown in Program Guide. Also when
I watch those channels that are labeled Unknown in Watch TV, and I press
"i" on the keyboard, there is no info shown on the rectangu
Ben de Luca wrote:
Im having an issue with sound stopping half way through dvb recordings I
am doing. Any Ideas how I can get some useful feed back to you guys so
it might be fixed?
I had this happen lastnight. About 15 minutes into The O.C. the audio
stops. Doesn't come back. The recording ri
Is there anything special I need to do to get guide data to fill for my
Air2PC channels? I setup the source, linked it to zap2it and ran
mythfilldatabase. Mythfilldatabase is putting in guide data for channels
in the format of '2-1', but not the new channels for air2pc in the
format of '21'. He
Tom E. Craddock, Jr. wrote:
Howdy,
Im running a 2.6.10 kernel from kernel.org, which has been compiled to
use the hdtv3k as a DVB card. It also has support for the air2pc card
as well. I just got mine air2pc card today and Im not sure where I
should put the dvb-fe-nxt2002.fw. I thought it wa
I've got it working on FC1 and FC2. And it works great. Head over to
http://mysettopbox.tv/phpBB2/viewforum.php?f=4&sid=625024b733d25d237471e6ee4cc8c8d4
and it's under MythTV BurnDVD 2.
Dennis
I have been using an older version mythburn for awhile and decided to
try the latest version. I have
Colin Smillie wrote:
Sounds great, is the script posted somewhere?
Thanks,
Colin
On Fri, 28 Jan 2005 13:43:42 -0500, James Armstrong
<[EMAIL PROTECTED]> wrote:
I don't know how many people here are using Vonage for phone service. I
have a perl script I hacked up that monitors the sip
And how far off the truth are they. I know the developers are very
against file sharing. Yet there is a market for it. We already "share"
our television recording around the house.
From the article "[MYTHTV USERS] have plenty of more mischievous
company". Then it starts talking about file
I have had this problem since day 1, live or watching recordings. I
can't remember it happening lately since switching to alsa from oss. I
will check and see. The audio would stutter when the scene went dark,
like the end of a show before the credits when there was still audio or
when going to a c
[EMAIL PROTECTED] wrote:
"A MythAutomation module or something that would let you control your lighting,
voice mail, temperature, etc. all from Myth."
I had considered writing something like this before I started using MythTV, but
as I started using MythTV, I just feel it would interrupt watchin
Chris:
I've noticed while watching live tv that show going to really
dark (but not black frame) scenes cause stuttering sound
and jerky picture and cpu usage spike. (This is with
vanilla .16) as soon as the scene brightens this goes away.
Is this anything to do with commercial detection?
(It ha
Adam Egger wrote:
Hopefully I can have something
coded and into CVS a week or two after 0.17 is out.
In Germany they always repeat a few seconds (sometimes it's more than
one minute) of a broadcast after the commercial break.
Is it also done in US? It would be a good way to cut out commercia
I am having trouble compiling mythmusic from cvs. I am getting the
following:
C -I/usr/local/qt-x11-free-3.3.3/include -I/usr/X11R6/include -o
cddecoder.o cddecoder.cpp
cddecoder.cpp: In member function `void CdDecoder::flush(bool)':
cddecoder.cpp:74: error: could not convert `
(*(this->Decode
Chris Pinkham wrote:
On Sun, Jan 30, 2005 at 11:27:12AM -0500, Chris Pinkham wrote:
commercials and eliminate false positives. I've got code started in
my source tree to try using aspect ratio changes to help detect when
commercials start and stop. There are also a few other detection ideas
ve.
On Jan 29, 2005, at 1:47 PM, James Armstrong wrote:
I have the same problem with Mythnotify, it does not display while
not watching tv. I have been thinking about trying to write something
in the frontend that will just display a popup qt box that will do
the same while in the menus.
I
Michael Segulja wrote:
Has the script not been posted anywhere or did I miss it? Have you
made it available so we can try it out?
Thanks,
Michael
Just cleaned it up some. Thinking about making it a C program instead of
Perl script. Here are the Perl Modules needed:
IO::Socket
Net::Pcap
NetPack
Brad Templeton wrote:
On Thu, Jan 27, 2005 at 11:46:08PM -0600, Paul Leppert wrote:
When watching livetv on ABC (HD 720p), I end up with 0% idle using top
72% cpu usage for mythfrontend
18% cpu for mythbackend
6% for X
1% for lirc_dev
<1% for top and others
When watching livetv
Robert Rozman wrote:
Hi,
maybe this is slightly offtopic, but for those that have some more telephony
needs around the house, there is quite interesting solution. Asterisk is
open source PBX, that can be easily connected to outside scripts, that can
then do mythnotifies (there are quite some script
Maverick wrote:
I don't know how many people here are using Vonage for phone service. I
have a perl script I hacked up that monitors the sip traffic to the
vonage phone and alerts my mythfrontend via mythnotify to the osd when
there is an incoming call. It shows the caller name and number. This can
John Williams wrote:
Love my vonage,
What is the real advantage to vonage. I've seen the ads, but haven't
been compelled to research.
Saving money. I have the $14.99 a month plan with Vonage. All calls are
over the i
I don't know how many people here are using Vonage for phone service. I
have a perl script I hacked up that monitors the sip traffic to the
vonage phone and alerts my mythfrontend via mythnotify to the osd when
there is an incoming call. It shows the caller name and number. This can
be used if
The USB-UIRT appears as a normal usb-serial device in /dev. Lirc
accesses this directly and implements the driver itself, so therefore
there is no kernel module involved. Should be a matter of just
installing/maybe patching & rebuilding lirc, certainly not the kernel.
As to what to do to set one u
David Whyte wrote:
A software version of the interface would be just sweet too.
Imagine a FF plugin that sits on the toolbar, which has imitation
LED's so I can see the status of my mythbox at work (without going to
mythweb obviously).
Would be cool :P (not as cool as real LED's of course :P)
Dav
I would LOVE to do this... post some instructions on how to make it?
Here is the location for viewing the MythLED box we made.
http://www.thearmstrongs.org/images/mythled.jpg
It uses a standard serial interface to communicate with the monitoring
software. The software queries the mythbackend to get
Here is the location for viewing the MythLED box we made.
http://www.thearmstrongs.org/images/mythled.jpg
It uses a standard serial interface to communicate with the monitoring
software. The software queries the mythbackend to get the status of the
tuners, free drive space, guide data, and voicem
Jeff Simpson wrote:
I record everything at 720x480 so that it matches up with the native
resolution of DVD.
Each 30 minute show is ~1.1gigs, so with commercials removed, 2 hours
should easily fit on a 4.7 gig disc (I've done 3 30 min shows on a
disc before I did commercial removing)
- Jeff
On Mon,
On Jan 22, 2005, at 12:56 PM, Ger Apeldoorn wrote:
Hi,
I'm shopping for a barebone pc, especially for Mythtv. I'd like one
with a tuner and cdplayer that can operate while the OS is not
running. Furthermore, only a nice colorful display makes my wife happy
with such a thing. :)
My eye has falle
I have been searching through news groups and google for a couple of
days now because X was using about 36-40% cpu utilization on playback
of a 720x480, 5500 - 8000 recorded show. I am using the latest fedora
core 3 kernel, and the 6629 nvidia drivers, with a Geforce4 440MX pci
card. After all t
Kenneth Hadley wrote:
Heya folks,
MythStreamTV looks like a cool add-in for MythTV but I'm having a heck
of a time compiling ffmpeg both from ffmpeg-0.4.9-pre1.tar.gz and from
current CVS.
My MythTV v.0.16 box is running FedoraCore2 put together from Jarod's
Guide.
I'm compiling ffmpeg with t
On Sun, 16 Jan 2005 22:38:00 +, Ashley Bostock
<[EMAIL PROTECTED]> wrote:
Right I've finially got it to compile with the following configure values:
VLC Version 0.8.1:
./configure --disable-x11 --disable-xvideo --disable-gtk --disable-sdl
--enable-ffmpeg --with-ffmpeg-mp3lame --wi
Steven Christall wrote:
Hi,
I have a PVR350 + Soundblaster live outputting through SPDIF to my amp.
I can't work out how to get the volume control in Myth to work! I
think it is because I am using SPDIF out? or maybe some option I haven't
found.
The volume onscreen display goes up and down,
On Thu, 13 Jan 2005 10:46:30 -0800, Fa Yoeu <[EMAIL PROTECTED]>
wrote:
Here is the stuff that would be neat, wondering if it is
possible or not:
o Stream Tivo recorded programs to myth.
o Stream Myth recorded programs to tivo.
o Use tivo as a slave for myth so you can distribute the
rec
Bill Bradley wrote:
ok...i am now getting this error...any ideas:
Starting Stream of 1196_2005010803_20050108045000.nuv
VLC media player 0.8.1 Janus
[0228] dummy interface: Using the dummy interface module...
[0234] main private: creating httpd
[0243] mpeg_audio packetizer: MPGA cha
George Styles wrote:
It would still make a great frontend.
On Jan 11, 2005, at 10:59 PM, Robert La Ferla wrote:
I was just looking at the specs again. Correct me if I'm wrong but I
don't think the Mac Mini has any PCI slots. So where would you put
the TV tuner card? Is there a USB/Firewire tune
David Whyte wrote:
James, do you understand the line in the installation README about
configuring vlc and ffmpeg? I think that is the problem I am having!
I am currently getting
VLC already alive, I'm going to whack it. THE PROCESS I MEAN!
Starting Stream of 1000_2005011214_2005011215
Does this imply it won't run with the latest CVS version of myth?
Thanks,
- Ciaran
Only the install.sh script will fail. I am running the latest cvs
mythweb and just patched the file myself and everything is working.
- James
___
mythtv-users mail
Currently I am using ffmpeg and VLC for transcoding/streaming. Soon I'll
have a FAQ done. Sorry there are some missing details, I'll work on that.
I'm not using RTSP, it's HTTP/MMS for now. But could be easily changed to do
whatever you like.
I would love to add tons of codecs and the option of pl
I've released a new project on Source Forge called MythStreamTV.
MythStreamTV is currently available in Alpha at
http://mythstreamtv.sourceforge.net/ for download.
MythStreamTV is a MythTV addon that allows live transcoding of nupplevideo
to Windows Media Player/Mplayer and allows control via Myth
Has anyone got any plans for a DVD-copying plug-in? I have this great
dual-layer burner itching to be used!
Obviously I should also ask the myth-devel list, but I thought I'd get
some user input first (and I'm not much of a programmer).
I envision a plugin that presents a TOC of chapters, lang
My playback of this clip is definitely weird... playback speed seems
to oscillate about 2 times a second. Deinterlacing or not doesn't
seem to make much of a difference.
Thank you for the confirmation.
So, I guess I just happen to be the only one with a local affiliate
broadcasting ATSC that'
Brandon Beattie wrote:
For a week or so now I've been unable to find out why myth music would
not display my songs. I've changed nothing on them for months actually.
Any additional attempt to try to re-load and start from scratch and
build a new song listing fails with a message when doing a scan
1 - 100 of 109 matches
Mail list logo