loris gava wrote:
Sono ancora qui con il mio solito problema dello scanner da far
funzionare.Qualcuno di voi penserà:ma perchè non lo cambia? In effetti
avrebbe anche un po' ragione, ma io sono testardo e voglio provare anora un
po' prima di mollare. Adesso che ho imparato il copia-incolla
osva wrote:
usb-modem, la ST Microelectronics (mai sentita prima, tra l'altro...) ed
ho
..
Male e` una delle piu` importanti industrie di microprocessori
europeee.
Senz'altro la piu` importante italiana, o meglio italo-francese.
Ha la propria sede a Catania.
ciao, andrea
...hai
Ciao a tutti,
1) potreste dirmi come si fa a disinstallare Grub dal MBR?
(so che con lilo il comando è: lilo -u)
2) Qual'è il file per configurare Grub e dove si trova (ho la Mdk 7.2)?
Grazie
Marco
Hi!
Does anyone have some ideas (good) how to configure, I would say quite
typical system, so linux lives on the first physical hd and win-system
on the second one.
I installed LM7.2 out of the box and I got ready made grub config,
fine. Everything is working BUT I have two partitions on my
On Wednesday 29 November 2000 05:47, you wrote:
Hi all,
I'm new to Linux (and this list). I have a problem with the floppy
"Supermount" not working. Command line works fine.
When trying to use the "Supermount" I get an error message saying:
"mount: wrong fs type, bad option, bad superblock
Hi, I am cured,
After taking a few steps from an archived reply (thanks Jerry) it worked.
Here's what I did:
From Gerald A. Jones:
"The 3COM 509B card can run in three modes ISA, PNP, and EISA. Mandrake 7.0
doesn't play nice with this card in PNP mode. Here's what you need to do.
Go to
I have installed Linux Mandrake Version 7.2 but I cannot use my cd rw drive.
Also, I have downloaded drivers for my sound chip and modem but do not know
how to install them!
Thanks for your help
Phil Farnham
I have installed Linux Mandrake Version 7 but I cannot use my cd rw drive.
Also, I have downloaded drivers for my sound chip and modem but do not know
how to install them!
Thanks for your help
Phil Farnham
I'm dual-booting Mandrake 7.0 and Windows, and
whenever I try to mount the Windows partitions,KDE
ends up hanging and I have to reboot. What's the
problem here?
__
Do You Yahoo!?
Yahoo! Shopping - Thousands of Stores. Millions of Products.
- Original Message -
From: "Asif Ahmed" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Wednesday, November 29, 2000 2:10 PM
Subject: [newbie] KDE crash
I'm dual-booting Mandrake 7.0 and Windows, and
whenever I try to mount the Windows partitions,KDE
ends up hanging and I have to
I have spent a week downloading Linux Mandrake Version
7.2.iso which I haveduly used to create a bootable
cd-rom.
I have tried it on 2 AMD 500 machines and a Celeron 600
without success.
On one of the AMDs it just locks up part way through
the white letters onblack screen boot.On the
Every time I reboot my date reverts back 6 hours. No matter how many times I
correct it with the 'date' command it still reverts back after rebooting?
What am I doing wrong here?
I downloaded the stable version of Netscape 6 and it definitely renders
pages better, but crashes often. It doesn't seem to work with Tucows, when
I go to select the state it either hangs or it reverts back to the "Select
state" choice in the drop down, it crashes whenever I paste an address
Look Rog... ;) there's no reason to rub it in. you've got a cable
connection and all you need to know is that your connection is obscenely
fast!
--
Mark
/ * Sometimes it becomes necessary to rock the boat
* in order to get the rats up from below decks
* so they can be kicked over the side
I've had better luck with Mozilla M18 than Netscape 6 -- Mozilla seems to
run faster and more stable, eben though they both have almost exactly the
same codebase. However, there are still a *lot* of websites out there using
JavaScript that is not compatible with the Mozilla/Netscape 6 document
I think we sort of agree, what I am really saying I suppose is that Guarddog
is a good place to start for a newbie, it gives a reasonable degree of
security without the need for understanding of ipchains. As ShieldsUp is
aimed at Windows users (I believe) and it couldn't find me when I hid
Civileme,
Typed in "supermount enable" and "supermount" in the terminal.
Got nothing!
Any other ideals?
Doug
civileme wrote:
The /etc/fstab file reads like this:
/dev/fd0 /mnt/floppy ext2
rw,user,noauto,nosuid,nodev,unhide 0 0
Tried "auto" instead of "ext2", got a
Mark Johnson wrote:
Every time I reboot my date reverts back 6 hours. No matter how many times I
correct it with the 'date' command it still reverts back after rebooting?
What am I doing wrong here?
Is the 6 hour difference your offset from GMT/UT?
Use drakconf and set your timezone.
I
How are you trying access the partitions? Meanwhile
I've never used the 7.0 version, in 7.1 and 7.2 it
mounts those drives with no problem. I have had a few
problems where I've tried to access those drives via
something like CompuPic or Midnight Commander and it
takes a while to read the file
I got a new virus attached to an email called "test mail" from "Mailing
Server" yesterday. Anyone else?
-michael-
Hi,
Is there a way to set different backgrounds to each virtual area in the same
desktop?
Thanks
Charles
I've noticed, that when posts are made to this list, and another list or
email accout - multiple copies are sent out to this list. I didn't notice,
but does Mandrake have a faq concerning this "feature"?
-JD-
On Wednesday 29 November 2000 16:02, you wrote:
Civileme,
Typed in "supermount enable" and "supermount" in the terminal.
Got nothing!
Any other ideals?
Doug
civileme wrote:
The /etc/fstab file reads like this:
/dev/fd0 /mnt/floppy ext2
On Wed, 29 Nov 2000, Phil Farnham wrote:
I have installed Linux Mandrake Version 7 but I cannot use my cd rw drive.
What is the problem?
- you can't read a cd on it
- you can't write a cd on it
- you can't open the tray
- ?
Also, I have downloaded drivers for my sound chip and modem but do not
I was running a small web site using Apache on an old PowerMac 7500/100 at
my last job. That machine is at least 5 years old, so it does work pretty
well.
I paid a very small amount for the commercial distribution from
www.linuxppc.com
I found it difficult to install. The Mac came with a 500MB
On Wed, 29 Nov 2000, Mark Johnson wrote:
I downloaded the stable version of Netscape 6 and it definitely renders
pages better, but crashes often. It doesn't seem to work with Tucows, when
I have heard nothing but complaints about it. On all platforms that it
exists.
Paul
--
I was a heathen.
FYI, in case some of y'all haven't run accross this.
http://www.borland.com/kylix/
It's not clear if Borland is supporting KDE or Gnome or both, there is an
interesting short article about the KDE vs Gnome 'battle" --- don't know if
battle is the right word here, IMHO...
Hello,
Are you using Windows on the same machine? Is Linux set to GMT? Sometimes
that is an issue.
Thank You,
Vincent A. Primavera
On Wednesday 29 November 2000 12:41, Paul wrote:
On Wed, 29 Nov 2000, Mark Johnson wrote:
Every time I reboot my date reverts back 6
On Wed, 29 Nov 2000, you wrote:
h...sounds a vicious rumor based on superstition and hot air since
most if not all of windows is written VB these days and leaves little or
no room for real coding.
i am not saying tht microsoft is actually using the linux code per se,
but would it
Tony K. Olsen wrote:
Hi Everyone,
Quick question for any MDK 7.2 users who have Voodoo 3
3000 AGP video cards. If so, what options did you compile
into the default kernel source to use the video frame
buffer?
I see support for other video cards in the kernel
source but nothing
On Wed, 29 Nov 2000, you wrote:
On Wed, 29 Nov 2000, Mark Johnson wrote:
I'm running 7.2 KDE on a PII400/288MB and it's a slow as crap!
Especially while running with a terminal window, Netscape, Pan, and XMMS.
KDE kills the performance. I use xfce, and things go very fast. 128Mb ram
and the
Bill Fisher wrote:
Billin kmail under the 'Settings' drop-down-menu
there is a selection called 'Configuration'. In the
'Network' section under the 'Properties' tab in the
'Default send method' are you set to 'Send Now' or to
'Send Later'?
--
Alan
Thanks for the reply
It's
Civileme,
Tried as both "root" and "user".
Supermount is not there.
Is there someplace that I can download it from?
If so, what dir. do I place it in?
Doug
civileme wrote:
On Wednesday 29 November 2000 16:02, you wrote:
Civileme,
Typed in "supermount enable" and "supermount" in the
Tom Brinkman wrote:
On Monday 27 November 2000 02:39 am, Romanator wrote:
Hi everybody,
I have 7.2 installed. I am looking for a stable kdevelop to install.
I think it's 1.1 or 1.2. Does anyone know the exact files need to
install the entire development package.
Any help would be
On Wed, 29 Nov 2000, michael wrote:
I got a new virus attached to an email called "test mail" from "Mailing
Server" yesterday. Anyone else?
-michael-
YES! Me too! I thought that was pretty obvious, eh? I took a look inside
the zip file (wishyouwerehere.zip), and it was a file named
Thank you Paul
I cannot read a cd but can open the trray. When booting up from the cd it
is obviously recognised but when Linux is loaded and I try and click on any
cd icon I can find there is no response
- Original Message -
From: "Paul" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent:
Side note here on PMFIREWALL
I installed it day before yesterday, ran the script. Was very easy - mostly
I accepted defaults. Then I ran a scan on my system. Much to my surprise,
I was wide open on ALL my udp ports... Reran the setup looking for what may
have caused this terrible error,
Mike
Tried from "root" and "user".
No luck.
Doug
Michael Scottaline wrote:
civileme [EMAIL PROTECTED] wrote:
On Wednesday 29 November 2000 16:02, you wrote:
Civileme,
Typed in "supermount enable" and "supermount" in the terminal.
Got nothing!
Any other ideals?
Doug
Tom Brinkman wrote:
On Monday 27 November 2000 10:14 pm, Tom Brinkman wrote:
On Monday 27 November 2000 02:39 am, Romanator wrote:
Hi everybody,
I have 7.2 installed. I am looking for a stable kdevelop to
install. I think it's 1.1 or 1.2. Does anyone know the exact files
need
Nah... Cable isn't obscenely fast... DSL is obscene!
-JD-
-Original Message-
From: Roger Sherman [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, November 29, 2000 3:01 PM
To: [EMAIL PROTECTED]
Subject: Re: [newbie] Connection speed
On Wed, 29 Nov 2000, Mark Weaver wrote:
Look Rog... ;)
Paul Marriott wrote:
Hello all,
Having installed 7.0 Air 7.01 Helium from Cd with very
little fuss, I thought 7.02 would be just as easy, if not
easier. Nope. The box is an HP Pavillion 6425...AMD500-3d,
64MbRAM, hda is reserved for windoze, hdb cdrom, hdc cdrw,
and hdd is partitioned for
Asif Ahmed wrote:
I'm dual-booting Mandrake 7.0 and Windows, and
whenever I try to mount the Windows partitions,KDE
ends up hanging and I have to reboot. What's the
problem here?
__
Do You Yahoo!?
Yahoo! Shopping - Thousands of Stores.
On Wed, 29 Nov 2000, you wrote:
On Wed, 29 Nov 2000, Mark Johnson wrote:
Every time I reboot my date reverts back 6 hours. No matter how many times
I correct it with the 'date' command it still reverts back after
rebooting? What am I doing wrong here?
Is your timezone set correctly? Check
On Wed, 29 Nov 2000, you wrote:
Just FYI,
I'm running 7.2 KDE on a PII400/288MB and it's a slow as crap!
Especially while running with a terminal window, Netscape, Pan, and XMMS.
You might be able to run linux the OS on a 486 with 16MB of ram, but my
impression is if you want to run a
Mark Johnson wrote:
I downloaded the stable version of Netscape 6 and it definitely renders
pages better, but crashes often. It doesn't seem to work with Tucows, when
I go to select the state it either hangs or it reverts back to the "Select
state" choice in the drop down, it crashes
Adrian Smith wrote:
greetings. i ran across 2 Macs --about 3 years old (didn't check the exact type or
chip)-- along with keyboard, mouse and 17inch monitors for $500.
I don't think this is off topic, an install is an install, regardless of
what OS used to be on the system, or what the
Patrick,
If I remember correctly Magellan was/is a lightweight Konquerer type
browser based on the Mozilla "gecko" rendering engine. I'm not sure if it
ever really got out of the beta stage. For a while there was a lot of talk
about it, but then as the release of mandrake 7.2 came closer and
Was your monitor listed as a standard monitor in X or did you have to make
it up yourself? I'm having a similar problem with a Toshiba Laptop.
--Original Message--
From: "Dave Sherman" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: November 29, 2000 9:00:12 PM GMT
Subject: Re: [newbie]
Bill Fisher wrote:
Mandrake 7.0
When I try to send mail using SMTP I get a message that it
has been sent, yet it remains in the outbox on kmail, and
I've verified the message has not been received. I think I
had sent a few messages successfully.
I can receive messages in kmail.
I have same
On Wed, 29 Nov 2000, you wrote:
Mine is definitely way slower than Windows. When dragging my mouse around
the screen it appears to periodically get caught on some virtual "rug", it
takes 3 or 4 seconds to iconify and restore a window, it takes about 30
seconds to get the desktop properties.
Hi everybody,
I have heard a lot about CodeWarrior for Linux. Are any of you using it?
If you are, I'd like to hear your comments about the programming tool.
--
Roman
Registered Linux User #179293
Email is Penguin Powered
Larry Marshall wrote:
Can someone help me interpret the mkisofs manpage? I need
to copy a LM7.1 install CD.
What do I put on the mkisofs commandline to make the iso
file bootable? There seem to be several options and all
require that I point to a bootfile. Anyone know where that
is and
Ha! this is exactly why i don't run windows anymore.
--
Mark
/ * Sometimes it becomes necessary to rock the boat
* in order to get the rats up from below decks
* so they can be kicked over the side and drowned!
*
* REGISTERED LINUX USER # 182496
*/
*REPLY SEPERATOR*
On Wed, 29
I got a new virus attached to an email called "test mail" from "Mailing
Server" yesterday. Anyone else?
-michael-
YES! Me too! I thought that was pretty obvious, eh? I took a look inside
the zip file (wishyouwerehere.zip), and it was a file named Music.exe.
Hmm, double click on that
On Thursday 30 November 2000 02:27, you wrote:
2. what is magellan
I'm pretty sure that it is the next generation of Kmail, and is supposed to
be like Outlook for Linux. Basically it's a really good mail client that is
still in extreme beta, if it is even still being worked on.
It's not
Serves us right for using windows.
It's a little worm called W32 /Music@M worm
Roger Sherman wrote:
On Wed, 29 Nov 2000, michael wrote:
I got a new virus attached to an email called "test mail" from "Mailing
Server" yesterday. Anyone else?
-michael-
YES! Me too! I thought that was
Mine is really stable, even more stable than N4.x. The only problem is that
it crashes when I try to access a secure site, but other than that I'm happy
with it, and I use it for my main browser.
It doesn't slow down my computer too much also. That is probally due to the
fact that I have 256
Hi,
I may be wrong here, but I do not believe that is an indication that
PMFirewall is not working properly. UDP ports will be assumed open if a
closed indication is not given. If your firewall is simply dropping the
packets, then they would appear open. There is more information at this link
1. is it possible to combine kmail into konquerer
As in use Kmail to send email from Konquerer? Mine is set up like that from
installation.
2. what is magellan
I'm pretty sure that it is the next generation of Kmail, and is supposed to
be like Outlook for Linux. Basically it's a really
Hi,
I've tried many times to install linux on my compaq presario laptop model
1237. the most success i've had is very limited. now, I'm stuck at aurora
in the boot process. please help...
melanie
On Wed, 29 Nov 2000, Anthony wrote:
1. is it possible to combine kmail into konquerer
As
Jeff:
Random multiple postings are a regular "feature" of this list. AFAIK, you're
the first person who has noted that they occur the messages are posted to
several addresses. My first notion was that they are just part of the charm
of Mandrake, but lately I've been working on a theory involving
On Wed, 29 Nov 2000, Mark Weaver wrote:
Look Rog... ;) there's no reason to rub it in. you've got a cable
connection and all you need to know is that your connection is obscenely
fast!
Nyah nyah! LOL ;-p
--
peace,
Rog
http://www.slammingrooves.com
Registered Linux user #190719
On Wed, 29 Nov 2000, Jon Doe wrote:
I got a new virus attached to an email called "test mail" from "Mailing
Server" yesterday. Anyone else?
-michael-
YES! Me too! I thought that was pretty obvious, eh? I took a look inside
the zip file (wishyouwerehere.zip), and it was a file
On Wed, 29 Nov 2000, Dickman, Jeff wrote:
Nah... Cable isn't obscenely fast... DSL is obscene!
Really? What kind of speeds do you get?
-JD-
-Original Message-
From: Roger Sherman [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, November 29, 2000 3:01 PM
To: [EMAIL PROTECTED]
Hi all,
First off, thanks to everyone who tried to help me last week (to no avail!)
I'm re-posting in hopes of fresh ideas.
I've got two boxes (I know the names are brutal):
#1) Bill0 - K62-266 Mandrake 7.2 (my web, mail, samba server) Works Great!
It has two network cards (one for the cable
Paul [EMAIL PROTECTED] wrote:
On Wed, 29 Nov 2000, Mark Johnson wrote:
I'm running 7.2 KDE on a PII400/288MB and it's a slow as crap!
Especially while running with a terminal window, Netscape, Pan, and XMMS.
KDE kills the performance. I use xfce, and things go very fast. 128Mb ram
and
Hello, Gang!
Question:
I try to acces my Cd-rom and floppy in MD 7.2 but they both have
padlocks on them. How do I change the permissions and to what file do I
make the changes to?
Thanks in advance,
Riker
How can you say that!
I have DSL and I do not normally get better than 1300kps.
Charles (-:
- Original Message -
From: "Dickman, Jeff" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Wednesday, November 29, 2000 6:23 PM
Subject: RE: [newbie] Connection speed
Nah... Cable isn't
At 00-11-29 -0600, you wrote:
Every time I reboot my date reverts back 6 hours.
Suggest check your time zone setting. HTH
This is the MTX virus if I'm correct. There are articles of this posted on
MSNBC, MSN or one of those sites.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Roger Sherman
Sent: Wednesday, November 29, 2000 8:28 PM
To: [EMAIL PROTECTED]
Subject:
Solve all virus problems delete windows, reformat the drive and install
linux. No more virus.
--
Thank you.
Gary A. Garibaldi
Linux-Mandrake 7.2
Registered Linux User: 188550
--
7:30pm up 3 days,
On Wednesday 29 November 2000 09:28 pm, you wrote:
Sure...better yet, my diagnostic skills probably aren't on par with yours,
so how about I send it to you and you try?
Thanks but no thanks, had my share of winblows virii in the past. :)
Hi,friends:
what should I do after I run startx?
how to set the size of font and screen resolution?
thanks,
Michael zhao
lµJ\¢akyëaygër¢êßç׫ëZqǬ±«a¶Úÿ 0ÖËT¥Ê
On Wed, 29 Nov 2000, Jon Doe wrote:
On Wednesday 29 November 2000 09:28 pm, you wrote:
Sure...better yet, my diagnostic skills probably aren't on par with yours,
so how about I send it to you and you try?
Thanks but no thanks, had my share of winblows virii in the past. :)
Just
Michael wrote:
Hi,friends:
what should I do after I run startx?
how to set the size of font and screen resolution?
thanks,
Michael zhao
lµJ\¢akyëaygër¢êßç^?׫?ëZqǬ±«a¶Úÿ0ÖËT¥Ê
You can set that in DrakConf. Have fun.
--
Jay
"May the sound of happy music, And the lilt of Irish
please use theKDE desktop and all the needed info are available. It is
important that u have the X properly installed and runningh.
On Wed, 29 Nov
2000, Phil Farnham wrote:
I have installed Linux Mandrake Version 7.2 but I cannot use my cd rw drive.
Also, I have downloaded drivers for my sound
On 29 Nov 2000, Michael Scottaline wrote:
KDE kills the performance. I use xfce, and things go very fast. 128Mb ram
and the same processor. 3 netscapes, xmms, Pan, 5 rxvt's (terminals),
wordperfect, burning a cd, all at once, no problem.
Paul
xfce looks rather nice. but
Dear All, It has been quite an experience since I got rid of Suse and
reinstalled Linux M 7.2. I had so many problems that I reinstalled twice
since last night.
Last night after yesterday's reinstall I thought I had it made. I had
almost everything working and then I set up my sound. After that
On Wed, 29 Nov 2000, Phil Farnham wrote:
Thank you Paul
I cannot read a cd but can open the trray. When booting up from the cd it
is obviously recognised but when Linux is loaded and I try and click on any
cd icon I can find there is no response
When you open a terminal and go
cd /mnt
do a
I downloaded Gnome-Control-Panel 1.3.1 from Tucows yesterday, I
configured, make and tried to make install the package. The install
stopped and a few error messages came up. I figured that I needed some
libs to install it. I tried to access my Gnome Control panel and now
the app won't work
Hi
I am getting an error starting up Xfree. I have an S3 Trio 64V+ and am
getting the following error:
"An error has occurred:
could not open default font 'fixed'
try to change some parameters."
Please help, this is for a demo for my IT Manager to convert from Red Hat to
Mandrake.
Regards
Kim
Before I got an intel box I used to run linuxppc on a Mac, and it worked
pretty well. I was pretty new to it all so I don't know how much I
didn't know. Anyway, now there's also this thing called Mac on Linux
(http://www.maconlinux.org/) where you can run the Mac OS on linuxppc or
Suse
Dear friends:
I just received the Macmillain 4-CD LM7.2 Complete, NOT the Wallmart
version but the one just issued as of Nov. 28, 2000.
I am very sad to report that all the KDE files are clearly the final
Beta 1.99, NOT KDE 2.0 Final, as I was personally assured by Macmillain
itself.
Please
www.freshmeat.net
Then search for
iptraf
trafshow
These will provide more information than you'll ever need.
-JMS
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Alfonso Castro
Martinez
Sent: Wednesday, November 29, 2000 7:36 AM
To: [EMAIL
Hi!
I'll very grateful if someone can tell me some tool to see the traffic
(packets) without I have SNMP, I can't access to it.
I used traceroute but I want to probe other tool to compare the results.
Thank you in advance:
Alfonso
[EMAIL PROTECTED]
Hi, I have a problem:
My 3c509b ISA does not work with 7.2, nor did it it work with 7.1.
I selected the correct module at install, but it hasn't ever worked. I've
gotten it to work before with RedHat 6 and dhcpcd, but I'm having trouble
with it now. I'm connecting to the internet through a
Hello,
I am running v7.2 on a 433 Mhz Celeron with 192 MB of RAM which I recently
upgraded from 64 MB. There is an increase in performance, but not major. It
is recognizing the RAM. Is there any configuring that I can do to increase
performance?
Thank You,
Vincent
87 matches
Mail list logo
