qualcuno saprebbe dirmi se si puo` e come si fa a cambiare l'immagine
di sfondo di lilo quando parte in modalita` grafica?
Grazie ENx
--
Prendi GRATIS l'email universale che... risparmia: http://www.email.it/f
Studi e lavori? Con LOL ti prepari da casa con lassistenza on-line di un docente.
Stefano Sebastiani ha scritto:
Però da interfaccia grafica non ho suoni di sistema, non posso sentire
file
midi (kmidi abortisce ) e non ho più il dev/cdrom (qualcuno conosce il
major
e il minor number per ricrearlo?) per sentire i cd musicali.
E' sufficiente creare un link
On Sun, 9 Dec 2001, Gnubbo wrote:
Uso MDK 8.1 kernel 2.4.8.34.1
Ho aggiunto con drakconf tre utenti al sistema e ho assegnato loro password del
tipo
poldo - password001
chicco - password002
olivia - password003
Ho scoperto, chiaramente sbagliando, che se mi loggo ad esempio come chicco e
Dopo aver modificato il file etc/fstab, perche mi impediva l'accesso a
floppy e cdrom, mi è comparsa una scritta: [mntent] Warning: no final
new line at the end of etc/fstab.
Cosa vuol dire?
grazie
Fabio
Grazie 1000!
Questo software sembra splendido...
una chicca per quel che stavo cercando...
ti ringrazio moltissimo !!!
Cu s%N!
Ciaociao Byez ! L8r \\marco
[www] http://members.xoom.it/verbal_666 ||| http://surf.to/verbal_666
[email] [EMAIL PROTECTED] ||| [EMAIL PROTECTED] |||
[EMAIL PROTECTED]
Giuseppe Giorgi wrote:
In fondo al file ci deve essere una riga vuota, premi invio alla fine
dell'ultima riga,
così facendo vai a capo, su di una nuova riga.
Se ho sbagliato qualcuno di più esperto mi corregga.
Ciao, Beppe.
- Original Message -
From: Fabio Congiu [EMAIL
ho un problema: non funziona bene l'audio. Ho usato sndconfig per
configurarlo ed è andato tutto bene. Quando ho riavviato la macchina
però il suono è scomparso. Su HardDrake vengono menzionate due
soundcards: OPTi sound system e OPTi SoundExpression MPU-401. La prima
saundcard ha il Tool di
Ciao a tutti, ho un problemino, non capisco perchè appena avviato
Mandrake 8.1 non mi appare la barra che si trova in basso al video ( per
capirci KDE a sx e l'orologio a dx).
Sono costretto a fare due logout per farla apparire, cosa ho combinato?
Ciao e grazie Milko
Ho provato ad installare, con il tool Mandrake Software, Tuxracer ma non
funziona, non parte il gioco pur essendo presente come applicazione
nella categoria divertimento.
grazie Fabio
Ciao, penso tu ti riferisca ad Aurora, che ti informa sui progressi di
connessione del sistema.
Vai sul Mandrake Control Center, sezione boot. Da li puoi scegliere il
front-end grafico che più ti aggrada.
Fabio
- Original Message -
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent:
- Original Message -
From: Mark AKA VèrB@L [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Sunday, December 09, 2001 2:33 AM
Subject: [newbie-it] mandrake 8.0 su win2k
E' possibile far girare la versione 8.0 da una sessione Windows 2000?
Esiste qualche software per caricare Linux da
On Sun, 9 Dec 2001 11:52:34 -0800
Bill Winegarden [EMAIL PROTECTED] wrote:
Hi,
I'm getting my system back into shape after the kernel mishap. The most
important aspect will be the modem.
On my original system (LM 8.1) and a Dell Inspiron 8000, I used the LTModem
drivers to get it up and
irl60 wrote:
I couldn't even use Xkill, so I hit the reset switch, and up came a bunch
next time, exit x with ctrl+alt+bkspc.
this will/should drop you to command line with only x errors.
tc,hago.
g
.
--
think green... save a tree, save a life, save time, save bandwidth,
save storage.
I have iptables installed, all the Bastille packages and used BastilleChooser
rather than baffle myself with InteractiveBastille, done a stealth scan at
http://scan.sygatetech.com which shows ports as closed rather than
stealth, I understand from previous posts that if Bastille is running
I've also been looking at a few of the current crop of mobos that feature
RAID support.
I'm *not* interested in them because they purport to support RAID--I've
heard civilme's warnings several times--but rather in the interest of
getting an extra IDE channel or two. Is this a reasonable
sorry i know this doesn't help much, but i am running 8.1 with the addition 2
libs you mention and wp 8 is running fine, so i know it can be done. i did
install 8.1 fresh though.
have you tried the corel newsgroups?
On Sunday 09 December 2001 13:11, Michel Clasquin spoke unto the masses
lol! i have also run starcraft and diablo and now tfc, half-life and
counterstrike. even though i have half the video ram in linux as in win
2000, i have _better_ fps in linux!
sadly i can't play sims. seems they had to change the code to get it in
linux so the win version doesn't run
hi anuerin!
thanks for the excellent suggestion. will try it!
additional questions abt /tmp
-are the files (that programs place there temporarily) automatically
cleaned up at certain times, or do we need to manually delete the files
there? if the latter, how do we know which we can delete
Hello all,
Using Mandrake 8.1 (download edition) I want to upgrade to Galeon 1.0.
I also downloaded Mozilla 0.9.6 and installed it.
Now, here is where things get screwy. While upgrading Mozilla it says
0.9.4 is needed. Shouldn't this be covered by the newer release? Is
there a particular
One problem to check with your home directory is to make sure you have that
squiggly mark in front of the home users name:
/home/~neil/webpages/index.html
-Dennis
-Original Message-
From: Neil R Porter [mailto:[EMAIL PROTECTED]]
Sent: Sunday, December 09, 2001 12:29
To: Linux Newbie
I run Mandrake on a G4. For some reason, I was never able to get OpenFirmware
to boot Linux by default as soon as I turn it on. So when I turn on the
computer, I go into OpenFirmware, then type (according to the number of my
boot partition):
boot hd:9,\\yaboot
After that I get the yaboot
I have a computer I thought SSH was working on. I used Putty to log in but
it never asked me for my pass phrase, just my username and password. I
don't know if that was encrypted or not. I'm starting to think not.
Anyway, I installed Bastille and told it to keep the ssh port and port 22
Go to any mandrake ftp site (follow the download link from the main
page). Once logged in, go up a couple of directories to the directory
Mandrake. Then go into directory updates .
For example, if the 8.1 link on the website is:
ftp://ftp2.sourceforge.net/pub/mirrors/mandrake/8.1/i586/
The
did you make sure that you told putty to use ssh protocol?
and you need to turn off telnet since ssh is much more secure.
I use putty quite often and one of my main bugaboos
is forgetting to tell it to use ssh when I go to my
machine.
-Original Message-
From: [EMAIL PROTECTED]
When I open Putty, I type in the address and click the dot for ssh. Telnet
is turned off, Bastille seems to have turns off all ports and my machine
doens't respond to ping, telnet, tracert or anything else. My supervisor
wanted to know why he couldn't ping it.
From: Carl Lafferty [EMAIL
Not familiar enough with bastille to be able to offer any suggestions.
my only time installing ssh was on a slackware box that didn't have it
bundled.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Dragon .
Sent: Monday, December 10, 2001 2:31 PM
Hi all,
I have a real modem that's loosing its mind.
Every once in a while it will go into a 20-
minute fit where it it clicks continually as
if someone were typing
ath1
ath0
ath1
ath0
I think it's been doing it in Windows too.
The modem isn't actually installed in Linux
because I use a
Thanks for your explanation.
El Dom 09 Dic 2001 08:39, escribiste:
environment variables store certain settings/values that are needed by
programs on your machine. it allows you to specify the settings/values in
a central location. environment variables are usually stored in
/etc/profile
I am running LM 7.2. Does anyone know how to setup printing via the command
line interface (CLI)? I know that I can do it from GUI, but I would like to
know what files to create/alter and such. Any help would be greatly
appreciated.
The alternative, possibly, is to set it up using the GUI
What are the config files and what needs to be done to allow access? Do I
have to tell the sshd file to accept logins? Does ssh just ask for a
username and password if it is encryped, not the phrase?
From: Carl Lafferty [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
NDPTAL85 wrote:
Larry, thanks! I added what you said to add and its working now. I still
don't know what caused it to stop working before but at least I know its
working now and I don't have to re-install. And thanks to everyone else
who helped too.
(I'm cross-posting so everyone can see
yes, thats correct...
I put the gateway device in there..
I think its like this:
GATEWAYDEV=ppp0
or whatever your gateway device is...
and I leave GATEWAY empty, then it just defaults to the that devices
address..
always worked for me..
rgds
Frank
-Original Message-
From: [EMAIL
On Saturday 08 December 2001 17:30, Mick wrote:
Hi list,
I am trying to edit my lilo.conf file in order to tell the system that I
have
a second cdrom drive that I want detected as a scsi dev.
Each time I go to save the changes to the file in the editor it says
'cannot
save file,
SSH, by default, checks many different routes to login:
1. Checks for a hosts.equiv, shosts.equiv, .rhosts, or .shosts and
verifies that the username matches on both ends, allowing the user
immediate access
2. Checks for a public / private key pair, at which point it will ask for
the
On Monday 10 December 2001 10:40, you wrote:
I have iptables installed, all the Bastille packages and used
BastilleChooser rather than baffle myself with InteractiveBastille, done a
stealth scan at http://scan.sygatetech.com which shows ports as closed
rather than stealth, I understand from
OK, time to get serious about this frewall stuff!
I installed 8.1 with the server defaults. It seems that this has resulted in
some kind of firewall, because when I turned on internet connection sharing
it warned me that a firewall was in place and that I might have to do some
manual
Alan Carpenter wrote:
Alan, one of the things that stopped me from logging into a Samba Server
from a Windows box was that I was not logged on to the Windows box with
the exact user name that Samba was expecting; i.e. Samba expects Bob and
I'm logged on ( Windows box ) as Bobby. Log off Windows
On Tuesday 11 December 2001 00:08, Brian Parish wrote:
OK, time to get serious about this frewall stuff!
I installed 8.1 with the server defaults. It seems that this has resulted
in some kind of firewall, because when I turned on internet connection
sharing it warned me that a firewall was
On Monday 10 December 2001 19:08, you wrote:
OK, time to get serious about this frewall stuff!
I installed 8.1 with the server defaults. It seems that this has resulted
in some kind of firewall, because when I turned on internet connection
sharing it warned me that a firewall was in place
if I were you, I'd download gShield (do a google search)
its really easy, there is only one file to download, and it asks questions
that require one word answers..
and it can do anything you want, port forwarding and such.. its the closest
I have found to pmfirewall on my long search for a
hi,
be glad to contribute something ;-).
if you look at the mandrake control center-boot-boot config-Advanced , there is a
checkbox (sticky push button box? ;-) that should clean tmp at each boot but for some
reason it doesnt work here. it is not recomended to just delete the locks in tmp
On Tuesday 11 December 2001 04:40, poogle wrote:
| I have iptables installed, all the Bastille packages and used
| BastilleChooser rather than baffle myself with InteractiveBastille, done
| a stealth scan at http://scan.sygatetech.com which shows ports as
| closed rather than stealth, I
hi anuerin.
thanks again for your feedback! :)
At 09:32 01/12/11 -0500, you wrote:
hi,
be glad to contribute something ;-).
if you look at the mandrake control center-boot-boot config-Advanced ,
there is a checkbox (sticky push button box? ;-) that should clean tmp at
each boot but for
On Monday 10 December 2001 22:01, you wrote:
I still don't consider ths a bug, I can get into the machine form any where
I choose, if I set it up to not allow me in as root via network or virutual
console (ALT+CTRL+f4) or SU. still works, just won't let a 'root user in
the wrong door. but I
just wondering if anyone's gotten cvs working right out of the box?
here's what i did so far:
-created a new repository in /etc/cvs/repos
-in /etc/cvs/cvs.conf, set CVSROOT=/etc/cvs/repos
when i go to mandrake control center and click on system/services and then
on cvs, it
where can I set mouse sensitivity either in linux or gnome?
-Paul Rodríguez
_
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
Want to buy your Pack or Services from MandrakeSoft?
Go to
I just ran across this the other day. Haven't tried it:
http://www.troubleshooters.com/tpromag/200104/200104.htm
heres the relevant section:
I bought the Dexxa Mouse on 1/6/2001 and installed it 1/7/2001. It made my
mouse performance even worse. The Linux mouse was as bad as a notebook
I'm having problems starting x through an ssh connection. When I log on I
get the following message:
Last login: Mon Dec 10 21:15:50 2001 from xx.xx.xx.xxx
/usr/X11R6/bin/xauth: (stdin):1: bad display name hxx-xx-xx-xxx:10.0
in add command
where the x's are my ip address. I'm sure I had x
On Monday, December 10, 2001, at 02:01 PM, Larry Sword wrote:
NDPTAL85 wrote:
Here is the results of route -n
[root@Dreadnaught root]# route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric RefUse
Iface
192.168.0.0 0.0.0.0
49 matches
Mail list logo
