Hi all
I'm not looking for the SQFLEX but the SQ.
Thanks
Jay.
Sent from my iPhone
> On Aug 26, 2016, at 8:29 AM, Allan Sindelar <al...@sindelarsolar.com> wrote:
>
>
> Allan Sindelar
> al...@sindelarsolar.com
> NABCEP Certified PV Installation Professional
>
> Hi all,
I can't find Grundfos SQ power curves, any ideas of where or anybody have them
Thanks
Jay
___
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://l
disconnected it, all normal. I tested voc of all modules after they
were replaced,(190 watt 72 cell) customer wanted more watts, and all were
normal and the same. I didn't spent the time to do a ISC.
Replacement is my thought.
Jay
Peltz power.
> On Aug 25, 2016, at 7:04 AM, Allan Sinde
Ha that's a good one.
But still good to know if they were murdered or had defects.
While I also have had early failures on every brand, that's earlier than most
I've seen
Usually it's outside of warranty, of course.
Jay
> On Aug 24, 2016, at 7:56 AM, Ray Walters <r...@solarray.com&
Hi drake,
The early failure of other batteries brings up questions
Charge set points?
Frequent overcharge, possible but damn unusual
Frequent undercharge?
Hi heat location?
Offgrid?
Ongrid?
Battery type?
Jay
Peltz power.
> On Aug 24, 2016, at 7:36 AM, Drake <drake.c
Hi all
I was contacted by someone offsite about a 5 stack outback radian, grid
connected that is having all sorts of problems.
He's been in long contact with OB engineering but still no answers.
If anyone has experience with such a critter, please let me know.
Thanks
Jay
Peltz power
Thimbles are easy to install and make fine strand wire OK for use in standard
connections.
Jay
Peltz power.
> On Aug 8, 2016, at 5:39 PM, Glenn Burt <glenn.b...@glbcc.com> wrote:
>
> Be aware that depending upon the vintage of the Engage cable, up to recently
> t
So what is the micro of choice these days?
If enphase is no longer home?
Jay
Peltz power.
> On Aug 5, 2016, at 6:59 AM, gary easton <g...@arp-solar.com> wrote:
>
> just a worthless ticket but no action and certainly no timely reimbursement
> if at all. I would
ost sense.
Any recommendations?
Thanks
Jay
___
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.or
Spend $600 and get a front loader.
I just checked mine
150 watt max watt load
.11 kWh
VS
3000+ watt surge.
I've seen old top loaders bury a old stout trace U2512.
It will destroy the samlex
Jay
Peltz power.
Sent from my iPhone
> On Jul 28, 2016, at 9:21 AM, frenergy <
There is also the Ace clamp.
I haven’t used it or heard any reports about it.
Looks better in many regards than the S-5.
jay
peltz power
> On Jul 28, 2016, at 6:06 AM, Will White <w...@solarenergy.org> wrote:
>
> The big problem I've had with the minis is when you attach
can't seem to locate them.
Thanks in advance
Jay
___
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches
I've got a customer with an older pair of XW 4048 inverters and cc's.
He would like to use the new web conext box, and probably the battery meter
with them.
Anybody know if this is possible?
Thanks
Jay
Peltz power.
___
List sponsored by Redwood
I’m curious about it happening at the same time each day. I think that is a
big clue.
Could it be some other interference from some other electrical part? Motors
etc?
And what about if its heat related? IE the roof/modules heating up causing the
issue?
Curious.
jay
peltz power
> On
Oh boy.
Which BP models.
I mean those things have had lots of trouble.
jay
peltz power
> On Jul 22, 2016, at 8:23 AM, August Goers <aug...@luminalt.com> wrote:
>
> Glen,
>
> It’s interesting you mention that you’re having AFCI issues with new TL
> inverters and old
not on “smart”meter.
Can anyone help me with what this persons options are?
thanks
jay
peltz power
___
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches
Hi All,
Any trick methods to keep a SQflex running on AC power at a given flow rate
that is less than full power?
I’ve got a well that is just on 1 gpm, around 150’ lift.
the sqflex 3-2 will do it, but at 3gpm with full watts, an amazing 265 watts.
thx
jay
peltz power
as well as to what others think?
jay
peltz power
> On Jun 21, 2016, at 4:59 PM, Jason Andrade <ja...@westcoastsustainables.com>
> wrote:
>
> Hi Wrenches,
>
> I am looking at the new rates for PG’s time of use and was wondering what
> others in California are usi
2 modules and then make 2 sets of 10 modules, which would
be around 3550 watts.
I’m just not a big fan of removing already installed working parts.
jay
Peltz power
> On Jun 21, 2016, at 12:47 PM, Ash Bowersock <ash.bowers...@rgsenergy.com>
> wrote:
>
> Good
HI Ash,
Backwoods solar sells 190 watt 72 cell modules that might give you some options.
jay
Peltz power
> On Jun 21, 2016, at 8:31 PM, Brian Teitelbaum <bteitelb...@aeesolar.com>
> wrote:
>
> Hi Ash,
>
> Are you sure that there are 12 of the SolarWorld 175’s on a si
Hi dan
Thanks.
But the problem occurs with no wires connected to the inverter other than DC
power.
Thx
Jay
Sent from my iPhone
> On Jun 11, 2016, at 3:46 PM, Dan Fink <danbo...@gmail.com> wrote:
>
> Since you don't name the inverter OEM, I'm just guessing, but
of this fiasco
Thx
Jay
Peltz power
> On Jun 11, 2016, at 11:58 AM, Travis Jordan <tra...@jordansolar.net> wrote:
>
> Just a thought, but some of the old or cheap inverters don't take nicely to
> bonding the ground to neutral. You may try leaving the ground wire
> disconnec
industrial batteries, you'll want to find the
correct size based on the battery specific info.
Jay
Peltz power
Sent from my iPhone
> On Jun 10, 2016, at 7:50 AM, gary easton <g...@arp-solar.com> wrote:
>
> I have a customer that has an 8 kW outback radian system with a 516amphr 48
Hi James,
I recommend PV Cables.
They will have what you need in stock for fast shipping.
Bryan is the owner.
707-923-3000
west coast time
> On Jun 9, 2016, at 4:40 PM, James Rudolph wrote:
>
> Aloha Wrenches,
> I am building my first 1000v system here in Oahu.
>
in float.
Jay
> On Jun 9, 2016, at 3:23 PM, t...@wagonmaker.com wrote:
>
> Is everything feeding the inverter in good shape? Batteries healthy, all
> cabling tight and clean, all connections good, all grounds in place? You
> don't say what brand inverter but it soun
to the OEM.
Thoughts, ideas?
Thanks for your time,
jay
___
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenche
Hi all,
I contacted the oem of the part.
Venture mfg co.
They want $350 for it.
I'm sure my customer will like this price much better.
Jay
Peltz power.
> On Jun 7, 2016, at 3:29 PM, Jerry Shafer <jerrysgarag...@gmail.com> wrote:
>
> You may be better off with a new pa
> Hi all
I need to replace the 2nd axis on a AZ225 tracker.
Array wants $1100 for their new part.
Seems way to high.
Anybody know where to get the old style part?
Thanks
Jay
Peltz power. ___
List sponsored by Redwood Alliance
List Address:
Can’t think of much else. but way to many of them out there for it to be a OEM
problem.
jay
peltz power
> On Jun 6, 2016, at 2:28 PM, Kirk Herander <vtso...@icloud.com> wrote:
>
> Hello,
>
> I am debugging a Florida ocean-side 35 kw array using 4 year old Canadian
>
to get to or long wire run etc again cost
vs reliability points to flex.
Jay
Peltz power.
> On Jun 1, 2016, at 12:23 PM, Kevin Pegg <kp...@energyalternatives.ca> wrote:
>
> This is the cable we use for the 9300's. Haven't had any issues as long as
> prepared properly. But
Dan from Exeltech gave a really good explanation of how an inverter can
actually start using power ( not loads) at a voltage well below the LBCO.
It could also be a bad battery.
Jay
Peltz power.
> On May 30, 2016, at 9:35 PM, Aaron Mandelkorn <reoso...@gmail.com> wrote:
>
Curious, what is the actual voltage and the nominal voltage?
Jay
Peltz power
> On May 30, 2016, at 4:59 PM, Aaron Mandelkorn <reoso...@gmail.com> wrote:
>
> Hi all. I returned to a off grid site today after having no winter access. It
> appears as though the classic 150 cha
Hi jeremy,
The 5548 has really poor surge, it's not a wire issue.
I'm not sure caps will fix that.
Jay
Peltz power.
> On May 30, 2016, at 9:46 AM, Jeremy Rodriguez <allsolarjer...@msn.com> wrote:
>
> Hello
> I've got an SW+5548 that will barley start my air compressor. O
my cable from Bryan at PV cables, you might give him a call for pricing.
Jay
peltz power
> On May 17, 2016, at 3:52 PM, Howard Arey <scot.a...@solarcentex.com> wrote:
>
> Good day, wrenches.
>
> I am installing four dual axis trackers totaling 52KW (13KW per) to four
Has any one used the Milbank tap connectors?
Or maybe get them approved by the utility?
It would require meter removal, but seems to be a good alternative to a
piercing connector.
thanks
jay
Peltz power
___
List sponsored by Redwood Alliance
List
Hi Drake,
Are you saying that the relays have failed or the breakers?
Jay
Peltz power.
> On May 13, 2016, at 7:37 AM, Drake <drake.chamber...@redwoodalliance.org>
> wrote:
>
> William and Wrenches,
>
> The lack of room in the GSLC becomes much worse when using
Hi William,
One easy upgrade would be the use of Arctic Ultra flex wire. It would put
almost no stress on the breaker connections.
I haven’t done this yet, but I plan on doing it for the next GSLC that I
install.
jay
peltz power
> On May 12, 2016, at 11:52 AM, William Mil
Thanks.
I hope that OB comes up with a better integrated unit.
I can get a 200 amp 3R transfer switch from my local hardware store for $189.
Not bad.
thx
jay
> On May 11, 2016, at 1:22 PM, Kirpal Khalsa <solarwo...@gmail.com> wrote:
>
> Jay, we typically use an
HI All,
I’m curious how folks are doing the AC bypass and AC side on a 3 radian 240v
setup?
I”m leaning on doing an external transfer switch, but curious what others have
done.
thanks
jay
peltz power
___
List sponsored by Redwood Alliance
situation he will put the Generator mode back to AC from DC.
Sincerely,
Jay Peltz
> On May 9, 2016, at 10:10 AM, Lones Tuss <lt...@outbackpower.com> wrote:
>
> Hello Fellow Wrenches
>
> Due to customer feedback OutBack decided to automatically enable the
> Inverters
Question to all the generator techs out there.
I’ve always been told that you don’t want a diesel to be sitting for long
periods. Fuel can go bad, all that sort of thing.
Vs propane which doesn’t care.
Is that true?
Or in mild climates will a monthly must run be OK?
Thanks
jay
> On Ma
anyway.
jay
peltz power
> On May 4, 2016, at 10:30 AM, Allan Sindelar <al...@sindelarsolar.com> wrote:
>
> Lena and all,
> I was watching this thread closely, as I have shared your concerns and I was
> hoping to hear of any new solutions. In this thread I hear of Gillette
Nope doesn't care.
You could have 1 shunt or 3.
You just get to monitor the 3 shunts.
The m3 display uses comm from the cc
Jay
Sent from my iPhone
> On May 3, 2016, at 8:44 AM, William Miller <will...@millersolar.com> wrote:
>
> Jay:
>
> Thanks for the reply. I m
Hi Steve
Thanks
I would only add that those self discharge rates are for good condition
batteries.
As they age, it increases.
Question.
How does the self discharge rates vary between, VRLA and flooded, or do they?
Thx
Jay
Peltz power
> On May 3, 2016, at 7:09 AM, Steve Higgins
Hi William,
Yes you need the shunt for PV the FNDC to read correctly
I'm not sure exactly what you mean about labeling the cc?
The FNDC doesn't care what each shunt does. Cc, inverter DC loads etc, if
that's what you mean
Jay
Peltz power.
> On May 3, 2016, at 12:10 AM, William Mil
That is what we are doing as a temporary fix.
According to outback the charger should stay off if it's set that way. It's
unclear why it's not doing it.
Actually opticsRE will allow full programming.
No phone app ( darn) but computer yes.
Jay
> On Apr 29, 2016, at 7:41 PM, Ray Walt
want and
I agree to have an additional cycle on the batteries when they don’t need it.
I’m working with OB to find out why this is happening.
Thanks
jay
peltz power
> On Apr 29, 2016, at 11:07 AM, Ray Walters <r...@solarray.com> wrote:
>
> What's wrong with the chargers bein
system
to do.
And as the experts here have provided, thats just not true.
Thanks for the input.
jay
> On Apr 28, 2016, at 6:58 PM, Jerry Shafer <jerrysgarag...@gmail.com> wrote:
>
> I cant say l have seen a single phase delta, open delta, use two of the three
> legs but
Hi Bill,
What about installing unistrut to the roof on those attachment points, then
installing the racking to the unistrut?
jay
peltz power
> On Apr 29, 2016, at 6:55 AM, frenergy <frene...@psln.com> wrote:
>
> Recently, a customer had a metal roof (not standing
HI August,
I guess my question is.
Are they asking for a lockout AC disconnect on a AC circuit IE from the AC
panel?
or
are they asking for a lockout from the inverter AC at the inverter?
thanks
jay
peltz power
> On Apr 28, 2016, at 3:11 PM, August Goers <aug...@luminalt.com&
Great inverter but this is single phase.
Jay
Sent from my iPhone
> On Apr 28, 2016, at 3:10 PM, jerrysgarage01 <jerrysgarag...@gmail.com> wrote:
>
> What about an SMA Tri Power inverter
> Jerry
>
>
> Sent via the Samsung Galaxy S™ III, an AT 4G LTE smartphon
HI All,
I have a question from a person wanting to do a intertie on a commercial water
pumping site with
480v single phase delta configuration.
PV will be in the 10kw range.
Anybody have an idea of what equipment will work for this?
thanks
jay
peltz power
the chargers to operate.
OK so just hit charge off, and yes the chargers will turn off.
But next day, genny starts up, and the chargers come back on as well.
Outback says that shouldn’t be happening, but it is.
Anybody have this issue or know of a fix?
Thanks
jay
peltz power
.
I’d like pure sine wave.
Morning star 300 watt is a nice unit, would be on the small side.
Exeltech are nice but I think maybe have too much idle power.
Any other options out there than I folks can recommend?
Thanks
jay
peltz power
___
List
battery buss in the XW box. The reason is for more wire, to help dampen the
surge that is put onto the CC
Hope this helps
jay
peltz power
> On Apr 19, 2016, at 12:15 PM, Kristopher Schmid <sol...@legacysolar.com>
> wrote:
>
> No recent changes, Jay. System has been installe
Is this a new or old problem
And any changes ( equipment etc)just before the problem started?
Jay
Peltz power
Sent from my iPhone
> On Apr 19, 2016, at 9:04 AM, Kristopher Schmid <sol...@legacysolar.com> wrote:
>
> Hi All,
>
> I recall a thread not so long ago whe
.
Thanks
jay
Peltz power
___
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
a SS relay, but a regular mechanical contactor will do as well.
jay
Peltz Power.
> On Apr 4, 2016, at 12:34 PM, Allan Sindelar <al...@sindelarsolar.com> wrote:
>
> Wrenches,
> Core question first: Will a ~2010 Fronius IG-4000 respond properly to the
> frequency shift regulat
Hi all
Any recommendations for an outdoor enclosure
For a vfxr outback?
No cc but will need a mate 3.
Thanks
Jay
Peltz power.
___
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email
and heard of other successes with doing such things.
Good luck
jay
peltz power
> On Mar 25, 2016, at 8:04 PM, Rebecca Lundberg
> <rebecca.lundb...@powerfullygreen.com> wrote:
>
> Dear Solar Colleagues,
>
> I know the building code language regarding PV installation
Hi drake.
I've been researching problems with using the wrong connectors.
Are your home runs using same brand connectors as the modules?
Jay
Peltz power.
> On Mar 23, 2016, at 2:08 PM, Drake <drake.chamber...@redwoodalliance.org>
> wrote:
>
> Hello Wrenches,
>
correction gets us no reduction in our electric bills. So the 3% is bogus.
As to how it would help our GTI inverters, nope.
The smart meters, don’t use power line carrier but a wireless carrier, so hard
to see how that would help with EMF.
In the end snake oil.
jay
PS 20+ year ago at MREF, there were
HI All,
I was looking at the SW cut sheet.
It doesn’t mention series fuse rating.
It does mention “maximum reverse current”
Is this the same thing?
Or where would I find the series fuse rating.
thanks
jay
peltz power
___
List sponsored by Redwood
HI Dan,
Do you have any links on info on the battery?
A quick search didn’t find anything.
Yea I know given SMA time, I’ll be long retired when it comes out but still.
jay
peltz power
> On Feb 18, 2016, at 2:34 AM, Dan Fink <danbo...@gmail.com> wrote:
>
> Wrenches, please cor
HI Marco,
that might indeed be true.
But there are many references to batteries, battery relay control for battery
charging,
pages below all reference to different battery parameters
http://files.sma.de/dl/27676/SB5.0-6.0-1SP-US-40-IA-xx-10.pdf
27
36
37
39
Curious.
jay
> On Feb 17, 2
Hi all
I have a customer who has an old outback PS1-be. ( long extinct)
Battery enclosure that holds 4 group 27 12v batteries.
Anybody know of anything similar? He wants to add but I can't find anything in
a similar shape. I.e. Tall and narrow.
Any suggestions?
Thanks
Jay
Peltz power
That's a very trick way to do it!
A somewhat less expensive way would be to use a 3rd VFX on the leg you want
the added power on.
Jay
Peltz power.
> On Feb 1, 2016, at 9:09 PM, William Miller <will...@millersolar.com> wrote:
>
> Jeremy:
>
> I have often wondere
about the moringstar is that manual relay.
You should be able to configure a relay to turn off the GT inverter and turn on
the 600v CC automatically in the event of a power failure.
Not that I’ve looked for a 80 amp 600vdc one.
jay
peltz power
> On Jan 30, 2016, at 2:21 PM, Allan Sinde
Hi Dan
Can you provide any documentation on this?
Thanks Jay
Peltz power.
Sent from my iPhone
> On Jan 28, 2016, at 8:52 PM, <d...@energysolarnow.com>
> <d...@energysolarnow.com> wrote:
>
> While Brian T. is correct that fusing is not required for string-
Hi Jason,
It's part of why I asked because I'm not sure the best material.
I always thought of Epdm as pretty soft?
If you have a supplier let us know
Jay
> On Jan 28, 2016, at 5:00 AM, Jason Szumlanski
> <ja...@floridasolardesigngroup.com> wrote:
>
> If you are going
.
As lones pointed out, there are parts that would insulate the bolt.
But as the owner hasn't requested that, not going to suggest it!
I sure didn't plan on stirring the pot like this.
Just really wanted some help on sourcing the washers
Thanks
Jay
Peltz power
> On Jan 28, 2016, at 6:49 AM, Starli
but that rubber will compress
over time, and then we’ll have the SS washer touching the rail”
vs
what everyone else is saying “ that the plastic will fail and then it’ll be SS
on AL anyway.
1 step forward, 3 steps back.
jay
> On Jan 28, 2016, at 11:23 AM, Ray Walters <r...@solarray.com> wrote
My hesitation to that is the compressibility of the neoprene.
One of the things I like about nylon or similar hard plastics is they don’t
compress so you do get a ridged structure.
jay
peltz power
> On Jan 28, 2016, at 10:15 AM, Ray Walters <r...@solarray.com> wrote:
>
> I
for the parts he's looking for.
Jay
Peltz power.
> On Jan 27, 2016, at 8:56 AM, Kurt Johnsen <kjenergysyst...@gmail.com> wrote:
>
> Jay,
>
> There is the consideration of voiding any engineering that is being relied on
> for your protection. If there is a failure te
The rack company general specialties recommends a SS washer between aluminum to
aluminum, as in rack rails m
Sent from my iPhone
> On Jan 27, 2016, at 10:10 AM, William Miller <will...@millersolar.com> wrote:
>
> Jay:
>
> Conrad has a very pertinent point to make belo
Hi all
I've got a client who insists on "plastic " ( synthetic) washers between SS
washers and the aluminum racking and modules.
I'm tried every angle to assure him it's not a problem to no effect.
So anybody have any recommendations about type, material, and where to buy?
Thanks
HI All,
I’m guessing you are being hit with these questions too.
But any time frames for the SE equipment that’ll be ready to go with Tesla
batteries?
thanks
jay
peltz power
___
List sponsored by Redwood Alliance
List Address: RE-wrenches
Hi guys.
Look not all of us are getting these emails.
So please share what's going on ok
And my opinion is that if these are published emails with prices you can share
them, especially if you think they are bogus parts.
Jay
Peltz power
Sent from my iPhone
> On Jan 21, 2016, at 5:33
Hi jerry
You actually have one of the enphase battery units?
Jay
Sent from my iPhone
> On Jan 20, 2016, at 8:17 AM, Jerry Shafer <jerrysgarag...@gmail.com> wrote:
>
> Wrenches
> I have used it both for off grid and for battery back up, charger system is
> ok does
Hi Steve,
I'm curious about the temp sensor location.
Some OEM's use a bolt on type.
How do you find this for accuracy?
Thanks
Jay
Peltz power.
> On Jan 19, 2016, at 8:01 AM, Steve Higgins <st...@surrette.com> wrote:
>
> The testing that we have done with our batteries,
Hi all
Home power, latest issue 171, page 18
Has a photo of an inverter (display only no name)that wasn't doing a good job.
Interesting problem, glad it wasn't mine.
Anybody know what inverter that is?
Thanks
Jay
___
List sponsored by Redwood
to a pretty small amount. A cat 5 cable is run between the inverters
for comm. I don't know if you can use wireless yet.
Jay
Peltz power.
> On Jan 16, 2016, at 7:22 AM, Drake <drake.chamber...@redwoodalliance.org>
> wrote:
>
> Hi Kevin,
>
> Are you talking abou
Hi mark,
Yes the radian doesn't have an integral shunt.
All that information is via external shunts ( 1-3 shunts) and the FNDC
Jay
Peltz power.
> On Jan 16, 2016, at 9:34 AM, Mark Frye <ma...@berkeleysolar.com> wrote:
>
> Folks,
>
> I know with both the Radian a
frankly is a joke.
So I choose the Radian. its not perfect, but.
Jay
peltz power
> On Jan 15, 2016, at 11:59 AM, Kevin Pegg <kp...@energyalternatives.ca> wrote:
>
> Interesting thread. Our firm wrote off Outback products several years ago for
> two reasons:
>
> 1) bey
Hi Todd
Yes the XW, Radian, FXR versions and the RE version from magnum
Have generator support.
But that isn't what I was talking about in my last post.
Jay
Peltz power.
> On Jan 15, 2016, at 2:37 PM, toddc...@finestplanet.com wrote:
>
> the old sw inverters had somethi
hooked up and with that we could run the
chargers flat out, worked fine.
Jay
Peltz power
> On Jan 15, 2016, at 2:08 PM, Kevin Pegg <kp...@energyalternatives.ca> wrote:
>
> Hi Jay,
>
> Thanks for your information. That generator mode sounds like an excellent
> fea
Hi Kirk,
Schneider Conext XW is 120 or 120/240 with dual input
SMA SI 120v but has a dual input relay system you can use.
These are the only other two I know of that will sell from the battery inverter.
> On Jan 14, 2016, at 12:38 PM, Kirk Herander wrote:
>
> Hello,
>
HI Mark,
Backwoods solar has a good selection of battery parts and good tech help.
jay
peltz power
> On Jan 9, 2016, at 5:32 PM, Mark Frye <ma...@berkeleysolar.com> wrote:
>
> A buddy of mine is rigging his van with PV and is looking for some help.
>
> Can anyone s
HI All,
Any recommendations for a demo hammer, and where to get.
I don’t use it much, but for digging holes, and installing ground rods.
Standard 15 amp 120v unit.
thanks
jay
peltz power
___
List sponsored by Redwood Alliance
List Address: RE
Hi Carl,
Given that you are using SE equipment. I'm guessing that locking out the DC
disco or AC side to shut the array down wasn't an option the inspector wanted?
I thought that is one of the reasons for using SE?
Jay
Peltz power.
> On Jan 4, 2016, at 7:58 AM, Carl Adams <sw
.
As the situation is unclear, I would check with a fluid hydrometer to double
check your battery SG results.
Jay
> On Dec 21, 2015, at 9:16 AM, Allan Sindelar <al...@sindelarsolar.com> wrote:
>
> Wrenches,
> For years I have carried and used a refractometer to accurately me
.
And for the better Lithium BMS systems are measuring each cell for voltage and
temp. And are also able to balance them with small current flow.
We need that for LA, but I don’t think it’ll happen.
jay
peltz power
> On Dec 18, 2015, at 7:44 AM, Starlight Solar Power Systems
&g
Hi Larry,
I've talked to Ralph about adding temp comp and puekerts.
But he doesn't know think that it matters, I don't agree with him though.
http://bogartengineering.com/sites/default/files/docs/PeukertsComments.pdf
Jay
Peltz power.
> On Dec 17, 2015, at 7:26 AM, Starlight So
HI Todd,
Thats not my understanding.
VRLA batteris come just like FLA, cycling and non cycling.
I can’t speak to the non cycling as I don’t use them.
But cycling VRLA are lead/antimony, not lead calcium.
jay
peltz power
> On Dec 17, 2015, at 8:56 AM, toddc...@finestplanet.com wrote:
>
HI Lou,
I’m using the Optics RE at my house. Its pretty easy to hook up.
The newest rev works well with Power line carrier units.
And its free
jay
peltz power
> On Dec 17, 2015, at 8:05 PM, Lou Russo <l...@spreesolarsystems.com> wrote:
>
> Wrenches,
>
> I have seve
HI Ray,
yep agreed, the brain power is going towards Lithium. Thats what I would do.
Schneider also has a high temp shut down.
Not sure about OB, or magnum.
cheers,
jay
> On Dec 17, 2015, at 10:55 AM, Ray Walters <r...@solarray.com> wrote:
>
> Hi Larry and Jay;
>
Hi Tump,
FYI HUP industrial, on the 12v batteries, use bolted buss bars.
But many of the other industrial motive batteries ( like the HUP) are welded.
Jay
Peltz power
> On Dec 16, 2015, at 7:10 AM, Tump <t...@swnl.net> wrote:
>
> Individual 2 volt cells does allow one to b
Hi Allan
Backwoods has 190 watt 72 cell for good pricing.
They are roughly the same physical size as the 165's they have.
Good luck
Jay
Peltz power
Sent from my iPhone
> On Dec 14, 2015, at 2:08 PM, Allan Sindelar <al...@sindelarsolar.com> wrote:
>
> Todd, thanks, but
,
jay
> On Dec 15, 2015, at 11:34 AM, t...@wagonmaker.com wrote:
>
> Dan,
>
> That problem of no AC at remote sites while waiting for replacement batteries
> is why I always recommend at least two strings paralleled through a buss bar
> rather than across termin
.
Quite odd really.
Jay
peltz power
> On Dec 15, 2015, at 3:01 PM, Starlight Solar Power Systems
> <la...@starlightsolar.com> wrote:
>
> I received a replacement FET board from Outback that I ordered for an out of
> warranty inverter. They sent me a used/refurbishe
801 - 900 of 1539 matches
Mail list logo