[EMAIL PROTECTED] 08/07/03 11:36AM
I can reach the internet using the same cable modem at
the same location on a different machine running red
hat 6.2 with eth0 configured for dhcp.
Try removing the NIC from the other machine and install it in the new
machine.
Steve
PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Ken
Plumley
Sent: Thursday, August 07, 2003 2:05 PM
To: [EMAIL PROTECTED]
Subject: RE: Ethernet DHCP Fails on Cable Modem to
Internet
Here is the config for these files:
/etc/sysconfig/network-scripts/ifcfg-eth0
/etc/sysconfig/networking
doing but it just sounded familiar to
me..
HTH
Kel
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Ken Plumley
Sent: Thursday, August 07, 2003 4:36 PM
To: Redhat List
Subject: Ethernet DHCP Fails on Cable Modem to Internet
I am trying to setup an x86
?
-Original Message-
From: Ken Plumley [mailto:[EMAIL PROTECTED]
Sent: Thursday, August 07, 2003 2:23 PM
To: [EMAIL PROTECTED]
Subject: RE: Ethernet DHCP Fails on Cable Modem to
Internet
Jason,
When I set eth0 to activate automatically then
restart
the network it fails
etc, for
your cable service provider???
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Ken
Plumley
Sent: Thursday, August 07, 2003 1:04 PM
To: [EMAIL PROTECTED]
Subject: RE: Ethernet DHCP Fails on Cable Modem to
Internet
Otto,
Sorry, my
: Thursday, August 07, 2003 12:08 PM
To: [EMAIL PROTECTED]
Subject: RE: Ethernet DHCP Fails on Cable Modem
to Internet
Also.. Check if you can ping external ip's or
not.. It could be your
dns
is wrong
Cheers
Kel
-Original Message-
From: [EMAIL PROTECTED
AM
To: [EMAIL PROTECTED]
Subject: RE: Ethernet DHCP Fails on Cable Modem
to Internet
Steve,
Yes, I tried unpluging and reseting the cable
modem
too. It still dosen't work.
Ken
--- Rigler, Steve [EMAIL PROTECTED]
wrote:
Ken,
Maybe you've already tried
?
-Original Message-
From: Ken Plumley [mailto:[EMAIL PROTECTED]
Sent: Thursday, August 07, 2003 2:23 PM
To: [EMAIL PROTECTED]
Subject: RE: Ethernet DHCP Fails on Cable Modem to
Internet
Jason,
When I set eth0 to activate automatically then restart
the network it fails
To: [EMAIL PROTECTED]
Subject: RE: Ethernet DHCP Fails on Cable Modem to Internet
Your not messing/playing around with a 2.5 or 2.6 kernel are you?
I know from experience that dhcpclient breaks with those kernels.. The
way I got around it was to set a static ip (also make sure your
gateway
.
-Original Message-
From: Ken Plumley [mailto:[EMAIL PROTECTED]
Sent: Thursday, August 07, 2003 11:47 AM
To: [EMAIL PROTECTED]
Subject: RE: Ethernet DHCP Fails on Cable Modem to
Internet
Jason,
The nic is an SMC EZ 10/100 the driver loaded for it
is the RealTek RTL
PROTECTED] Behalf Of Ken
Plumley
Sent: Thursday, August 07, 2003 2:23 PM
To: [EMAIL PROTECTED]
Subject: RE: Ethernet DHCP Fails on Cable Modem to
Internet
Jason,
When I set eth0 to activate automatically then restart
the network it fails with the following message
I am trying to setup an x86 box running red hat linux
8.0 to reach the internet using a cable modem. I used
the Network Configuration tool to configure eth0 to
automatically obtain IP address settings with DHCP and
automatically obtain DNS information from the ISP.
When I try to activate eth0
is it?
-Original Message-
From: Ken Plumley [mailto:[EMAIL PROTECTED]
Sent: Thursday, August 07, 2003 11:36 AM
To: Redhat List
Subject: Ethernet DHCP Fails on Cable Modem to
Internet
I am trying to setup an x86 box running red hat
linux
8.0 to reach the internet using a cable modem
device is plugged
into it.
-Steve
-Original Message-
From: Ken Plumley [mailto:[EMAIL PROTECTED]
Sent: Thursday, August 07, 2003 10:47 AM
To: [EMAIL PROTECTED]
Subject: RE: Ethernet DHCP Fails on Cable Modem
to Internet
Jason,
The nic is an SMC EZ 10/100
]
Subject: RE: Ethernet DHCP Fails on Cable Modem to Internet
Jason,
The nic is an SMC EZ 10/100 the driver loaded for it
is the RealTek RTL-8139.
I tested the nic with a fixed IP and was able to
access other machines on the LAN.
Ken
--- Jason Staudenmayer [EMAIL PROTECTED] wrote:
Sounds like
Message-
From: [EMAIL PROTECTED] [mailto:redhat-list-
[EMAIL PROTECTED] On Behalf Of Ken Plumley
Sent: Thursday, August 07, 2003 11:40 AM
To: [EMAIL PROTECTED]
Subject: RE: Ethernet DHCP Fails on Cable Modem to Internet
Otto,
Earlier in my trouble shooting I tried the process you
On Thu, 2003-08-07 at 12:34, Otto Haliburton wrote:
--
I see that you had it working on a linux v6.2. Use that IP address, and
DNS. Also most ISP don't do this anymore but I don't know who you have
but your machine name might need to be a certain name. This used to be
used by the ISP
Jason,
The NIC was defective.
I am sending this email from the machine that could
not reach the internet, which now has a new NIC in it.
Thanks to all for your help. :)
Ken
So as I gather - It was Working at the office lan,
died upon power up at home. Not unusual, but not a
Good idea.I'll test the NIC on another machine.
Ken
--- Kenneth Goodwin [EMAIL PROTECTED] wrote:
Jason,
The NIC was defective.
I am sending this email from the machine that
could
not reach the internet, which now has a new NIC
in it.
Thanks to all for your help. :)
Sounds like the NIC kernel module isn't loading what kind of NIC is it?
-Original Message-
From: Ken Plumley [mailto:[EMAIL PROTECTED]
Sent: Thursday, August 07, 2003 11:36 AM
To: Redhat List
Subject: Ethernet DHCP Fails on Cable Modem to Internet
I am trying to setup an x86 box
into it.
-Steve
-Original Message-
From: Ken Plumley [mailto:[EMAIL PROTECTED]
Sent: Thursday, August 07, 2003 10:47 AM
To: [EMAIL PROTECTED]
Subject: RE: Ethernet DHCP Fails on Cable Modem
to Internet
Jason,
The nic is an SMC EZ 10/100
-
From: Ken Plumley [mailto:[EMAIL PROTECTED]
Sent: Thursday, August 07, 2003 12:11 PM
To: [EMAIL PROTECTED]
Subject: RE: Ethernet DHCP Fails on Cable Modem to
Internet
Steve,
Yes, I tried unpluging and reseting the cable modem
too. It still dosen't work.
Ken
into it.
-Steve
-Original Message-
From: Ken Plumley [mailto:[EMAIL PROTECTED]
Sent: Thursday, August 07, 2003 10:47 AM
To: [EMAIL PROTECTED]
Subject: RE: Ethernet DHCP Fails on Cable Modem
to Internet
Jason,
The nic is an SMC EZ 10/100 the driver loaded
PROTECTED]
Sent: Thursday, August 07, 2003 10:47 AM
To: [EMAIL PROTECTED]
Subject: RE: Ethernet DHCP Fails on Cable Modem to
Internet
Jason,
The nic is an SMC EZ 10/100 the driver loaded for it
is the RealTek RTL-8139.
I tested the nic with a fixed IP
Starting to sound like a deaf NIC. Did you try to swap it out yet?
-Original Message-
From: Ken Plumley [mailto:[EMAIL PROTECTED]
Sent: Thursday, August 07, 2003 2:23 PM
To: [EMAIL PROTECTED]
Subject: RE: Ethernet DHCP Fails on Cable Modem to Internet
Jason,
When I set eth0
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Ken
Plumley
Sent: Thursday, August 07, 2003 2:31 PM
To: [EMAIL PROTECTED]
Subject: RE: Ethernet DHCP Fails on Cable Modem to
Internet
The MAC address was added when I selected Bind to MAC
Subject: Ethernet DHCP Fails on Cable Modem to
Internet
I am trying to setup an x86 box running red hat
linux
8.0 to reach the internet using a cable modem. I
used
the Network Configuration tool to configure eth0 to
automatically obtain
IP address settings with DHCP and automatically
obtain
]
Subject: RE: Ethernet DHCP Fails on Cable Modem to Internet
Jason,
The nic is an SMC EZ 10/100 the driver loaded for it
is the RealTek RTL-8139.
I tested the nic with a fixed IP and was able to
access other machines on the LAN.
Ken
--
redhat-list mailing list
unsubscribe mailto
-Original Message-
From: [EMAIL PROTECTED] [mailto:redhat-list-
[EMAIL PROTECTED] On Behalf Of Ken Plumley
Sent: Thursday, August 07, 2003 11:11 AM
To: [EMAIL PROTECTED]
Subject: RE: Ethernet DHCP Fails on Cable Modem to Internet
Steve,
Yes, I tried unpluging and reseting
PROTECTED] On Behalf Of Ken Plumley
Sent: Thursday, August 07, 2003 11:40 AM
To: [EMAIL PROTECTED]
Subject: RE: Ethernet DHCP Fails on Cable Modem
to Internet
Otto,
Earlier in my trouble shooting I tried the process
you
suggested of copying the addresses for IP,
broadcast
and netmask
: Thursday, August 07, 2003 12:11 PM
To: [EMAIL PROTECTED]
Subject: RE: Ethernet DHCP Fails on Cable Modem to
Internet
Steve,
Yes, I tried unpluging and reseting the cable modem
too. It still dosen't work.
Ken
--- Rigler, Steve [EMAIL PROTECTED] wrote:
Ken,
Maybe you've
: RE: Ethernet DHCP Fails on Cable Modem
to
Internet
Your not messing/playing around with a 2.5 or 2.6
kernel
are you?
I know from experience that dhcpclient breaks
with those
kernels.. The
way I got around it was to set a static ip (also
make
sure
your gateway
Sent: Thursday, August 07, 2003 11:40 AM
To: [EMAIL PROTECTED]
Subject: RE: Ethernet DHCP Fails on Cable Modem
to Internet
Otto,
Earlier in my trouble shooting I tried the process
you
suggested of copying the addresses for IP,
broadcast
and netmask from
Glad to hear it. I hate DEAF NIC's see if the manufacturer will swap it out
I know 3com does.
-Original Message-
From: Ken Plumley [mailto:[EMAIL PROTECTED]
Sent: Thursday, August 07, 2003 3:04 PM
To: [EMAIL PROTECTED]
Subject: RE: Ethernet DHCP Fails on Cable Modem to Internet
Jason
:[EMAIL PROTECTED] Behalf Of
Ken
Plumley
Sent: Thursday, August 07, 2003 2:05 PM
To: [EMAIL PROTECTED]
Subject: RE: Ethernet DHCP Fails on Cable Modem
to
Internet
Here is the config for these files:
/etc/sysconfig/network-scripts/ifcfg-eth0
/etc/sysconfig/networking
Rik,
The cable modem has it's own MAC address to
authenticate with the ISP.
Earlier in my trouble shooting I tried what you
suggested for setting the eth0 MAC address to the same
MAC address of the NIC on a machine I have
successfully used to assess the internet with the
cable modem. But eth0
I only put one machine on the internet at a time.
Forgive if redundant to any previous questioning
DO YOU -
1) Move the cable from the ethernet port on working
machine
to ethernet port on broken machine.
2) reboot the cable modem.
3) wait a few
-Original Message-
From: [EMAIL PROTECTED] [mailto:redhat-list-
[EMAIL PROTECTED] On Behalf Of Otto Haliburton
Sent: Thursday, August 07, 2003 11:22 AM
To: [EMAIL PROTECTED]
Subject: RE: Ethernet DHCP Fails on Cable Modem to Internet
-Original Message-
From: [EMAIL
if this is what your doing but it just sounded
familiar to
me..
HTH
Kel
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]
On Behalf Of Ken Plumley
Sent: Thursday, August 07, 2003 4:36 PM
To: Redhat List
Subject: Ethernet DHCP Fails on Cable Modem to Internet
I can reach the internet using the same cable modem at
the same location on a different machine running red
hat 6.2 with eth0 configured for dhcp.
Try removing the NIC from the other machine and install
it in the new
machine.
At the same time? Perhaps your ISP only allows one DHCP
I only put one machine on the internet at a time.
--- Kenneth Goodwin [EMAIL PROTECTED] wrote:
I can reach the internet using the same cable
modem at
the same location on a different machine running
red
hat 6.2 with eth0 configured for dhcp.
Try removing the NIC from the
sounded familiar to
me..
HTH
Kel
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Ken Plumley
Sent: Thursday, August 07, 2003 4:36 PM
To: Redhat List
Subject: Ethernet DHCP Fails on Cable Modem to Internet
I am trying to setup an x86 box running red hat
My cable company has to reset the MAC address of any new NIC that is
connected to the modem. For example, if I changed the gateway server I
would have to call them and they would reset their equipment to the MAC
address of the new server's NIC. I could get around this by switching
the NIC out of
: RE: Ethernet DHCP Fails on Cable Modem to
Internet
Your not messing/playing around with a 2.5 or 2.6 kernel
are you?
I know from experience that dhcpclient breaks with those
kernels.. The
way I got around it was to set a static ip (also make
sure
your gateway
is correct
44 matches
Mail list logo
