A round object has depth too. The leading surface is the closest part
of that depth to the other round object.
Ode
At 12:26 PM 3/5/2010 -0500, you wrote:
Ode Coyote wrote:
If you observe the erosion patterns of rectangular flat electrodes,
you'll see for sure that that's not true.
A silversmith would have a roller device that could roll out the coins
cleanly.
I don't know how much they would charge, but it shouldn't be too much.
Dan
On Thu, Mar 4, 2010 at 6:39 PM, cking...@nycap.rr.com wrote:
On 3/4/2010 12:57:33 PM, Golden Aldi (goldena...@gmail.com) wrote:
Thanks
: CSSilver wire
The ridges on the edge concentrate edge discharge, limiting current
density without overloading the Nernst Diffusion layer and the centers and
backside do almost nothing.
Those ridges will dissolve pretty fast making them somewhat better,
however.
A bit fiddly to mount.
IOW
-list@eskimo.com
*Sent:* Wed, March 3, 2010 7:58:11 PM
*Subject:* Re: CSSilver wire
Ok, I have to ask this question...how much difference does it
make between .999 and .?. Seems minimal to me.
Thanks, Gary
Native American style flutes
Matted photos by ~ Gajon ~
www.etsy.com/shop/gajon
.
From: po...@prodigy.net
To: silver-list@eskimo.com
Subject: Re: CSSilver wire
Date: Thu, 4 Mar 2010 08:55:13 -0800
Hello Ode,
Just trying to understand this a little bit more and thinking out loud...
I have a SG6 generator that uses flat strips of silver. If I bent the flat
strips (just
Ode Coyote wrote:
If you observe the erosion patterns of rectangular flat electrodes,
you'll see for sure that that's not true.
Round wire only has one edge at the tip and it sharpens to a gradual
needle point...then the point erodes up the length of the wire.
Increase the distance between
strips and sheets too. I forget where
they are.
Dick
From: Golden Aldi goldena...@gmail.com
To: silver-list@eskimo.com
Sent: Wed, March 3, 2010 8:56:19 AM
Subject: Re: CSSilver wire
How would you suspend the coins in the water? The alligator clips should
not touch the water, right? I haven't
to hassle with adjusting prices with
silver market.
Matted photos and Native American style flutes by gajon
www.etsy.com/shop/gajon
From: Richard Goodwin dickgoodwin2...@yahoo.com
To: silver-list@eskimo.com
Sent: Wed, March 3, 2010 7:22:50 AM
Subject: Re: CSSilver wire
http://www.atlasnova.com
, 2010 8:05:12 AM
Subject: Re: CSSilver wire
That price -- $36/oz is for 99.99 % pure silver, not the more common (and
cheaper) 99.9% pure.
At ccsilver, they say their 99.9% is $31/oz, but they don't give a price
directly for 99.99%. Converting from length to oz, it looks to me like
, could you expand a little on why we are interested in reducing edge
effects?
Thanks.
Tom
- Original Message -
From: Ode Coyote odecoy...@windstream.net
To: silver-list@eskimo.com
Sent: Thursday, March 04, 2010 4:24 AM
Subject: Re: CSSilver wire
The ridges on the edge concentrate edge
Thanks for clarifying, Chuck! How clean should the anvil be, since I'll
have to clean it before my husband hammers the coin. I don't live in Canada,
but I suppose I could possibly get one over here in Europe.
The part I didn't quite understand was the last part, after you make a
thinner sheet,
*From:* GARY ABEL gajo...@yahoo.com
*To:* silver-list@eskimo.com
*Sent:* Wed, March 3, 2010 7:58:11 PM
*Subject:* Re: CSSilver wire
Ok, I have to ask this question...how much difference does it make
between .999 and .?. Seems minimal to me
-list@eskimo.com
*Sent:* Wed, March 3, 2010 7:58:11 PM
*Subject:* Re: CSSilver wire
Ok, I have to ask this question...how much difference does it make
between .999 and .?. Seems minimal to me.
Thanks, Gary
Native American style flutes
Matted photos by ~ Gajon ~
www.etsy.com/shop
...@prodigy.net
To: silver-list@eskimo.com
Subject: Re: CSSilver wire
Date: Thu, 4 Mar 2010 08:55:13 -0800
Hello Ode,
Just trying to understand this a little bit more and thinking out loud...
I have a SG6 generator that uses flat strips of silver. If I bent the flat
strips (just a little) so
On 3/4/2010 12:57:33 PM, Golden Aldi (goldena...@gmail.com) wrote:
Thanks for clarifying, Chuck! How clean should the anvil be, since
I'll have to clean it before my husband hammers the coin.
Now this is just me...
Anvil...reasonably clean...don't really worry about it...good to knock
off the
www.atlasnova.com
At 06:01 PM 3/2/2010 -0600, you wrote:
I have lost the links for buying the wire so would whoever sent would you
please sent to me again.
Thank you so much,
Leslie
--
The Silver List is a moderated forum for discussing Colloidal Silver.
Rules and Instructions:
www.atlasnova.com is where I get mine.
Dick
From: Leslie leslie1...@windstream.net
To: silver-list@eskimo.com
Sent: Tue, March 2, 2010 7:01:09 PM
Subject: CSSilver wire
I have lost the links for buying the wire so would
whoever sent would you please sent
dickgoodwin2...@yahoo.com
To: silver-list@eskimo.com
Sent: Wed, March 3, 2010 7:22:50 AM
Subject: Re: CSSilver wire
www.atlasnova.com is where I get mine.
Dick
From: Leslie leslie1...@windstream.net
To: silver-list@eskimo.com
Sent: Tue, March 2, 2010 7:01:09 PM
, 2010 7:48:57 AM
Subject: Re: CSSilver wire
Wow. Silver is at $17 an ounce right now.This site wants $36
I use silver bouillon coins .999 you can usually get them a couple dollars
over going rate. Of course you have to be set up with alligator clips.
Anyway, just wanted to point
they are comparable.
Are there cheaper places?
Dick
From: GARY ABEL gajo...@yahoo.com
To: silver-list@eskimo.com
Sent: Wed, March 3, 2010 7:48:57 AM
Subject: Re: CSSilver wire
Wow. Silver is at $17 an ounce right now.This site wants $36
I use silver bouillon
Goodwin dickgoodwin2...@yahoo.com
To: silver-list@eskimo.com
Sent: Wed, March 3, 2010 8:05:12 AM
Subject: Re: CSSilver wire
That price -- $36/oz is for 99.99 % pure silver, not the more common (and
cheaper) 99.9% pure.
At ccsilver, they say their 99.9% is $31/oz, but they don't give a price
...@yahoo.com
*To:* silver-list@eskimo.com
*Sent:* Wed, March 3, 2010 8:05:12 AM
*Subject:* Re: CSSilver wire
That price -- $36/oz is for 99.99 % pure silver, not the more common (and
cheaper) 99.9% pure.
At ccsilver, they say their 99.9% is $31/oz, but they don't give a price
directly for 99.99
style flutes by gajon
www.etsy.com/shop/gajon
From: Golden Aldi goldena...@gmail.com
To: silver-list@eskimo.com
Sent: Wed, March 3, 2010 8:56:19 AM
Subject: Re: CSSilver wire
How would you suspend the coins in the water? The alligator clips should not
touch
style flutes by gajon
www.etsy.com/shop/gajon
--
*From:* Richard Goodwin dickgoodwin2...@yahoo.com
*To:* silver-list@eskimo.com
*Sent:* Wed, March 3, 2010 8:05:12 AM
*Subject:* Re: CSSilver wire
That price -- $36/oz is for 99.99 % pure silver, not the more common
bars, but does it
make any difference?
Pat
From: Golden Aldi goldena...@gmail.com
To: silver-list@eskimo.com
Sent: Wed, March 3, 2010 8:56:19 AM
Subject: Re: CSSilver wire
How would you suspend the coins in the water? The alligator clips should not
touch
To: silver-list@eskimo.com
Sent: Wed, March 3, 2010 8:56:19 AM
Subject: Re: CSSilver wire
How would you suspend the coins in the water? The alligator clips should not
touch the water, right? I haven't a clue. A photo would surely be helpful. :-)
I have silver strips and have been wondering where
I use Canadian Silver Coinage.
I heat with a propane torch to soften, hammer it out on an anvil to
make a thinner sheet, and cut into ribbon for use with tin snips.
Chuck
If you don't care where you are, you ain't lost!
On 3/3/2010 8:12:48
From: cking...@nycap.rr.com cking...@nycap.rr.com
To: silver-list@eskimo.com
Sent: Wed, March 3, 2010 6:27:05 PM
Subject: Re: CSSilver wire
I use Canadian Silver Coinage.
I heat with a propane torch to soften, hammer it out on an anvil to
make a thinner sheet, and cut into ribbon for use
...@nycap.rr.com
To: silver-list@eskimo.com
Sent: Wed, March 3, 2010 6:27:05 PM
Subject: Re: CSSilver wire
I use Canadian Silver Coinage.
I heat with a propane torch to soften, hammer it out on an anvil to
make a thinner sheet, and cut into ribbon for use with tin snips.
Chuck
If you don't care
...@nycap.rr.com
To: silver-list@eskimo.com
Sent: Wed, March 3, 2010 7:40:32 PM
Subject: Re: CSSilver wire
I don't really see the rationalization for trying to get cheapest
price for a one time in a lifetime expenditure. Just Get 'er Done!
A single coin will yield all you'll ever use.
Canada has
, or availability. If one wishes to use four nine silver that's
fine, go for it, but three nine is adequate, ignoring cost.
N.
Date: Wed, 3 Mar 2010 16:00:51 -0800
From: dickgoodwin2...@yahoo.com
Subject: Re: CSSilver wire
To: silver-list@eskimo.com
I don't understand how using coins can
-
From: cking...@nycap.rr.com cking...@nycap.rr.com
To: silver-list@eskimo.com
Sent: Wed, March 3, 2010 7:40:32 PM
Subject: Re: CSSilver wire
I
don't really see the rationalization for trying to get cheapest
price for a one time
of supplies.
Dick
- Original Message
From: cking...@nycap.rr.com cking...@nycap.rr.com
To: silver-list@eskimo.com
Sent: Wed, March 3, 2010 7:40:32 PM
Subject: Re: CSSilver wire
I don't really see the rationalization for trying to get cheapest
price for a one time in a lifetime expenditure
disagree with you. Just feels better to me to go for
the 4 nines.
Dick
From: GARY ABEL gajo...@yahoo.com
To: silver-list@eskimo.com
Sent: Wed, March 3, 2010 7:58:11 PM
Subject: Re: CSSilver wire
Ok, I have to ask this question...how much difference does it make
I have lost the links for buying the wire so would whoever sent would you
please sent to me again.
Thank you so much,
Leslie
Hi Leslie,
From the archives:
http://www.mail-archive.com/silver-list@eskimo.com/msg43152.html
Craig
Leslie wrote:
I have lost the links for buying the wire so would whoever sent would
you please sent to me again.
Thank you so much,
Leslie
__ Information from ESET Smart
Classification: UNCLASSIFIED
Caveats: NONE
What is cheapest place to buy silver wire.
99.9 is good enough do not need the 99.99
My humble opinion it is all the same no matter what the assay report
says.
Bob
Classification: UNCLASSIFIED
Caveats: NONE
14, 2008 10:23 AM
To: silver-list@eskimo.com
Subject: CSSilver wire (UNCLASSIFIED)
Classification: UNCLASSIFIED
Caveats: NONE
What is cheapest place to buy silver wire.
99.9 is good enough do not need the 99.99
My humble opinion it is all the same no matter what the assay report
says
I buy mine here.
_http://www.ccsilver.com/_ (http://www.ccsilver.com/)
They send a certificate of authorization with it.
Hope this helps,
Andy
In a message dated 8/14/2008 10:24:32 A.M. Pacific Daylight Time,
robert.j.medw...@us.army.mil writes:
Classification: UNCLASSIFIED
Atlasnova.com
Monsterslayer.com
Ccsilver.com
ode
At 06:54 PM 4/7/2008 -0700, you wrote:
Mike and Silver Listers,
Where does one buy silver wire at the moment.
Silver costs/price must be volatile and probably has been for some time!
Any suggestions
Thanks: Douglas Haack
PS Aspartame
gvagraph...@adelphia.net wrote:
PS Aspartame has never worked for me on little black ants --
I'm in the San Diego area
Which fruit juice did you mix it with?
Marshall
--
The Silver List is a moderated forum for discussing Colloidal Silver.
Instructions for unsubscribing are posted at:
gvagraph...@adelphia.net wrote:
Mike and Silver Listers,
Where does one buy silver wire at the moment.
I bought mine on eBay.
Cyndi
--
The Silver List is a moderated forum for discussing Colloidal Silver.
Instructions for unsubscribing are posted at: http://silverlist.org
To post,
Mike and Silver Listers,
Where does one buy silver wire at the moment.
Silver costs/price must be volatile and probably has been for some time!
Any suggestions
Thanks: Douglas Haack
PS Aspartame has never worked for me on little black ants --
I'm in the San Diego area
--
The Silver List is
Evening Carlos,
At 01:38 PM 11/4/2006, you wrote:
Thank you for the very illustrative additional information on wire sizing.
I still would like to know what diameter electrode, in mm, Steve
Young refers to when he says in his diagram ... # 12 0.999 pure
silver wire... ...!!
Several
Hello again, Wayne,
Did you buy # 12 wire, or 12 ga wire...?
(It seems like a joke, but it is not!...)
Carlos
From: CWFugitt c_wa...@earthlink.net
Reply-To: silver-list@eskimo.com
To: silver-list@eskimo.com
Subject: CSSilver Wire Diameter
Date: Sat, 04 Nov 2006 13:50:24 -0600
Evening Carlos
Evening Carlos
At 02:08 PM 11/4/2006, you wrote:
Did you buy # 12 wire, or 12 ga wire...?
(It seems like a joke, but it is not!...)
I know it is not a joke.
It has been so long, I don't remember if I bought 12 or 14 ?
The measurements suggest that I purchased 14.
How long does it
Evening Mike,
Darn, I was sleeping good until I had a dream about measuring and
weighing silver wire.
I know you need to know the diameter of the wire she is using. And the length.
Still these measurements will allow weight calculation. I think you
want to know the weight of a .001 layer
Carlos said,
I am getting a bright, slightly darkened plating
on the inside of the 450 ml glass I use to produce my
CS. Could this also happen to my teeth?
Yes, if you were making CS in your mouth.
Is .999 silver good enough to make new electrodes? It
is the best I have found here so far to
@eskimo.com
To: silver-list@eskimo.com
Subject: CSSilver wire, etc.
Date: Fri, 15 Sep 2006 07:24:36 -0400 (EDT)
Carlos said,
I am getting a bright, slightly darkened plating
on the inside of the 450 ml glass I use to produce my
CS. Could this also happen to my teeth?
Yes, if you were making CS
Can anyone give an address where one can purchase more silver wire? Mine ar
just about worn to a thread! \Thanks, Mary
Mary Bennett
jacknm...@mindspring.com
Why Wait? Move to EarthLink.
I ordered this and recieved it within two days and they are cheap too
www.atlasnova.com
Debbie
Hi Thora,
Lucky girl! Canada is the home of the $5 Maple Leaf coin - the most pure
Silver available. . Fine. Cheapest way to get hold of it under
guarantee.
I was originally told it had to be for CS, but there seems to be some
cavalier attitudes to that idea around here, :-)
I want to buy some silver wire and I am in Canada. I want to buy some from
a Canadian supplier. Can anybody point me to a place I can do this.
Thora
Invermere, BC, Canada
mailto:mugg...@rockies.net
--
The Silver List is a moderated forum for discussing Colloidal Silver.
Instructions for
Imperial Smelting and Refining Co. Of Canada Ltd..
Van B.C.
1-800-663-0455..
( Or...silver Maple Leafs. .999 pure..From Coin Dealer, Bank, Or Royal
Canadian Mint..)
Grant..
Thora Rasmussen wrote:
I want to buy some silver wire
The site www.silvermedicine.org has a recommendation or two. I have dealt with
one they recommend and am very satisfied. Seven ft. of 14 guage . wire
for $26 and change. pj
-
Do you Yahoo!?
Yahoo! Mail SpamGuard - Read only the mail you want.
How much is it? I want to get some but I have a budget to follow. I have to
know how my can get with my spending money. Thanks.
Jay
Arnold Beland4/5/03 5:39 AM
OK, heads up, 36 inches, 3 feet., 1 ounce of 12 gauge with copy
of
assay certificate, free shipping USA, no limit, only
The name is Arnold Beland
This might be his old email addy...he moved
abela...@atlasnova.com
ken
At 11:29 PM 5/6/2003 -0400, you wrote:
When I was reading in the archives a bit ago I came across a message for
someone who sells silver wire on ebay. When I went to find it I couldn't.
The
Here you go
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItemitem=2633343986category=494 BR
He also sells pen lights
http://cgi6.ebay.com/ws/eBayISAPI.dll?ViewSellersOtherItemsuserid=abeland1include=0since=-1sort=3rows=25
BR
These will wrap so make sure you have all the url in the address line. BR
When I was reading in the archives a bit ago I came across a message for
someone who sells silver wire on ebay. When I went to find it I couldn't.
The thread is endless. If anyone knows that link, can you send it to me.
Thanks.
Jayattachment: IMSTP.gif
Jim, tell the group; did you get the VERY SOFT . wire?
How much did you buy and how much did it cost?
Here is the web site again: http://ccsilver.com/silver/superfines
html#four
Thank you, Lee Elder
--
The silver-list is a moderated forum for discussion of colloidal silver.
I bought . 12 ga. wire and I bought 4 feet at $4.95 per foot.
Jim
leeelder wrote:
Jim, tell the group; did you get the VERY SOFT . wire?
How much did you buy and how much did it cost?
Here is the web site again: http://ccsilver.com/silver/superfines
html#four
Thank you, Lee
I want to start making my own CS. Where are y'all purchasing your silver wire
from ?
Kathie
I want to start making my own CS. Where are y'all purchasing your silver wire
from ?
Kathie
Dear Kathie, I have some available. I get it from a jewelry supplier.
It is five bucks for a set of 2 five-inch .999 fine 14 gague wires.
Email me if you are interested.
Marshalee
: Monday, April 15, 2002 8:18 AM
Subject: CSSilver Wire?
I want to start making my own CS. Where are y'all purchasing your silver
wire from ?
Kathie
Ummok. But who is Bob and how do I contact him?? * clueless * Is he a list
member or
Kathie
Contact Bob Bartell. He has the whole set up for the wood bar, silver wite
and clips for it assembled for 10.00.
Place across qt jar and hook up.
Maxine
I want to start making
Kathie,
Go to http://www.monsterslayer.com or better yet, just call them and ask
for how ever many feet of 0.999 12 gauge silver wire you want...about 1
oz to the foot @ $9.00 an ounce, last time I bought some.
505.598.5322
Their service has been excellent.
Ciao,
Craig
--
The silver-list is
Here is Bob Bartell's E mail. He has the silver wire all ready with board etc
to put across your jar and insert the wire and plug in your machine and go.
works great.
bobbart...@earthlink.com
maxine
Bartell, Pres.
Walhalla Nutriceuticals
-Original Message-
From: Maxine Wilton [mailto:mm...@sprynet.com]
Sent: Monday, April 15, 2002 12:37 PM
To: silver-list@eskimo.com
Subject: Re: CSSilver Wire?
Contact Bob Bartell. He has the whole set up for the wood bar, silver
wite and clips
14 ga has more surface area and strength and will last longer. Get the 12
gauge. I'd use 10 gauge if they made it.
Ken
At 07:33 PM 3/26/02 -0800, you wrote:
Is there any reason to choose, say, 14 gauge over 22 gauge? What is the
difference in terms of quality for CS?
NK
--
The
Is there any reason to choose, say, 14 gauge over 22 gauge? What is the
difference in terms of quality for CS?
NK
I buy my wire from Sausalito Precious Metals, in
Calif.
1-800-262-5367
Good prices
__
Web-hosting solutions for home and business! http://website.yahoo.ca
--
The silver-list is a moderated forum for discussion of colloidal
Greetings,
I have had excellent service from MonsterSlayer.Com. Cheaper than many
and they have 12 gauge as well as sheet.
http://www.metalworks.com/WireSpecs.htm
The web site is a bit confusing (they are working on it, I think). I
always call to make certain I get what I want.
Regards,
Try www.ccsilver.com. Quick shipping and cheap to boot!
Chip
Acmeair wrote:
would like to purchase some wire, either .999 or ., but prefer
12 ga vs 14ga. would like to keep it in house
--
The silver-list is a moderated forum for discussion of colloidal silver.
To join or quit
Try C.C. Silver and Gold, Inc. They have . 12 ga. wire
for US $4.95/ft. last time I looked.
Al
- Original Message -
From: Acmeair
To: silver-list@eskimo.com
Sent: Tuesday, December 04, 2001 11:14 PM
Subject: CSsilver wire, .999 or .
would like to purchase some
http://www.metalworks.com has it for 9.10/oz which is about 3' of 12ga
.999
--
The silver-list is a moderated forum for discussion of colloidal silver.
To join or quit silver-list or silver-digest send an e-mail message to:
silver-list-requ...@eskimo.com -or- silver-digest-requ...@eskimo.com
would like to purchase some wire, either .999 or ., but prefer 12 ga vs
14ga. would like to keep it in house
Hi, all:
I checked out the URLs I already had for silver wire,
.999 or .. I checked out utopiasilver.com, which
has 14-gauge wire for $10.00 per foot.
I finally decided to order from ccsilver.com. Their
per-ounce prices for silver bullion are a little high,
but their prices for silver wire
I get my wire from here. Call and ask prices. Ask for
Tom Peterson (owner).
800-262-5367 or 800-942-4224
___
Build your own website for free and in minutes at http://ca.geocities.com
--
The silver-list is a moderated forum for discussion of
Folks, My first attempt in communicating. After 2 years of operation and some
36 gallons CS at 10 to 12 ppm, my original #14 gage wire [ .063 inches dia.
has been reduced to .052 inches dia ] about 17.5 % loss of dia., area and
volume. Batteries still ok, usually run on 120 vac backup.
Marshalee-- youre recent reply to a newbie on how to get started with a
very
simple machine was marvelous, direct and straight to the point withouta
lot
of gobbledygook. Thank you, Bob
Dear Bob, You`re welcome!!
I sure like to help folks, gives me lots of warm fuzzies... :o)
Love,
Marshalee
barnb...@aol.com wrote:
Folks, My first attempt in communicating. After 2 years of operation and some
36 gallons CS at 10 to 12 ppm, my original #14 gage wire [ .063 inches dia.
has been reduced to .052 inches dia ] about 17.5 % loss of dia., area and
volume. Batteries still ok, usually run
Listers,
I buy all my silver wire from Tom Petersons, (owner)
1-800-262-5367
Good prices, good service
__
Do You Yahoo!?
Yahoo! Messenger - Talk while you surf! It's FREE.
http://im.yahoo.com/
--
The silver-list is a moderated forum for
Hi Ya'all;
Ole Bob has some #14 --.999 pure silver wire.
The last wire I bought was $3.20 per foot plus about 55 cents postage.
System Tech Engineering
Robert L. Berger
12303 E.89th St.
Kansas City, MO 64138-5150
Ole Bob
--
The silver-list is a moderated forum for discussion of colloidal
Marsha,
Sure enjoy your comentary!! May I purchase wire from you?
Thank you.
Janet
Dear Janet, Thanks!
My wire supply is gone, and as I`m getting ready to move to Utah in a few
weeks, I don`t think I`ll get a new order until I get there. I hope someone
else on the list can help!
Sorry...
Me too Jan;
Wish I had known . I just sent some wire to Peterborough last
friday. Any thing we can do just holler.
Love Bob
Janet Lubart wrote:
Marsha,
Sure enjoy your comentary!! May I purchase wire from you?
Thank you.
Janet
-Original
Marsha,
Sure enjoy your comentary!! May I purchase wire from you?
Thank you.
Janet
-Original Message-
From: Marsha Hallett liah...@pacbell.net
To: silver-list@eskimo.com silver-list@eskimo.com
Date: Monday, August 07, 2000 4:16 PM
Subject: Re: CSIntroduction
Dear Marshall,
I think I
Josephene-
I just joined the list and I was wondering if anyone can tell me where to
get a good source of silver wire from. I think 14 gage wire is what was
refered to me by a newsletter I recieved, but now I have lost that.
Here's an excellent source of . (4 nines)
silver wire via mail
Hi everyone,
I just joined the list and I was wondering if anyone can tell me where to get a
good source of silver wire from. I think 14 gage wire is what was refered to
me by a newsletter I recieved, but now I have lost that.
Thank You,
Josephene
--
The silver-list is a moderated forum for
Here is an excellent source for silver wire.
http://www.ccsilver.com/silver/sterlingwire.html#FINE
They have . (that is four nines, folks), 12 ga. for 4.95 per foot and 14
ga. for 2.95 a foot. They told me this is specifically for making colloidal
silver.
The minimum order is 20.00 and
I am new to this, and am almost ready to make my CS. What gage is the best
12 or 14 before I order. Thanks,
Beth
-Original Message-
From: zarko...@aol.com zarko...@aol.com
To: silver-list@eskimo.com silver-list@eskimo.com
Date: Friday, September 24, 1999 11:57 PM
Subject: CSSilver Wire
Brian;
There is no best gauge, but if we all use #14 then standradization of making a
know ppm is within the realm of reality.
Ole Bob
--
The silver-list is a moderated forum for discussion of colloidal silver.
To join or quit silver-list or silver-digest send an e-mail message to:
The 16 ga. silver wire I've been using was given to me by someone
who said it was pure. I just ordered some 14 ga. .999 myself and
was surprised to find that I couldn't tell the difference between
the two in size. So does the 14 ga. actually last much longer than
the 16 ga. ? ( A dollar a
talking guages. It's the same with shotguns.
Karen
--
From: M. G. Devour mdev...@mail.id.net
To: -l...@eskimo.com silver
Subject: Re: CSsilver wire
Date: Thursday, August 05, 1999 3:50 AM
The 16 ga. silver wire I've been using was given to me by someone
who said it was pure. I
Robert,
Thank you.
Gratefully,
Kat Lee
In a message dated 7/30/1999 11:28:48 AM Central Daylight Time,
silver-digest-requ...@eskimo.com writes:
Re: CSSilver wire source?
Date: Fri, 30 Jul 1999 10:57:38 -0500
From: bober...@postoffice.swbell.net
To: silver-list@eskimo.com
Subject: Re
Hi,
Have only had time to lurk lately.
One of the people on another mailing list asked me if I could give them the
name of a company where they could buy silver wire if they made their own
generator.
When I first joined this list, I remember seeing the subject discussed. All
that email was
Hi,
Kat, I but my silver from Jules Borel Co, in KC MO Cat. number. 844-14/FS. I
asked for 99.999% and when I questioned them, they said that is what fine silver
is. All I know is that it makes repeatedly good CS.
Call 1-800-776-6858. My cost 10 ft. for $35.58 tax nd shipping.
Robert
--
The
Dear Pat,
I just found your address, the wire will be in the mail ASAP!!
Thanks for your patience.
Marsha
--
The silver-list is a moderated forum for discussion of colloidal silver.
To join or quit silver-list or silver-digest send an e-mail message to:
silver-list-requ...@eskimo.com -or-
Marsha,
did you get my email today or is your mail messed up again?
Donna
--
The silver-list is a moderated forum for discussion of colloidal silver.
To join or quit silver-list or silver-digest send an e-mail message to:
silver-list-requ...@eskimo.com -or- silver-digest-requ...@eskimo.com
Teee Heee! Did I *nail* it, or not! GRIN
Thanks for taking good care, Marsha.
Mike D.
(taking amusement in small things!)
Dear Folks,
The silver wire I was sent is OK! I`ll be shipping out your orders
this morning. Sems the fabricator at HM was out of 14 gauge, so he
took 12 gauge and drew
Dear Folks,
The silver wire I was sent is OK! I`ll be shipping out your orders this
morning.
Sems the fabricator at HM was out of 14 gauge, so he took 12 gauge and drew
it out, which increased the hardness and shininess. It is still good.
Whew!
Marsha
--
The silver-list is a moderated forum for
1 - 100 of 104 matches
Mail list logo
