into
sqlite to have a full working config.
On Monday, January 30, 2017 at 9:15:34 AM UTC+7, Marc Aubry wrote:
>
> Thanks,
> Done...
> Wait and see :)
>
>
> On Thursday, January 26, 2017 at 10:06:40 AM UTC+7, mwall wrote:
>>
>> On Wednesday, January 25, 2017 at 8
Thanks,
Done...
Wait and see :)
On Thursday, January 26, 2017 at 10:06:40 AM UTC+7, mwall wrote:
>
> On Wednesday, January 25, 2017 at 8:24:21 PM UTC-5, Marc Aubry wrote:
>>
>> Some updates about my problem.
>> I have try all the options mentioned above
>> - UPS
&
and the USB
communication with the RPI and weewx.
I gave up the diagnostic and i have now CRON scheduled a hourly reboot to
hide the problem.
Thanks to all of you for your support.
On Wednesday, January 18, 2017 at 1:47:54 PM UTC+7, Marc Aubry wrote:
>
> Hi,
> Thanks to both of yo
Hi,
Thanks to both of you matthew and andrew for your help.
i agree with you about a problem of usb communication between the weather
station and the rpi due to whatever unknown yet factor (probably dirty
power?)
I'll try the following in order to track this problem:
1st. i will connect both
ied the usb radio interface on a hub away from the pi rather
> than on the pi itself - just to see if it makes any difference??
>
> On Tuesday, 17 January 2017 13:09:02 UTC+2, Marc Aubry wrote:
>
>> Hi
>> there is only the weatherstation running on the rpi usb.
>> Th
17, 2017 at 6:09:02 PM UTC+7, Marc Aubry wrote:
>
> Hi
> there is only the weatherstation running on the rpi usb.
> The other system you are referring are running on other rpi.
> this one is dedicated to weewx only. there is no other usb device
> connected on it. , no keyboard,
the RPi in the same
> way as running with the station, and like Matthew I would be more
> suspicious of the RPi and the environment than weewx and the driver. Keep
> all usb cables well away from the RPi, power supplies, screens etc.
>
>
>
> On Tuesday, 17 January 2017 10:1
weewx to freeze?
>
>
>
> On Tuesday, 17 January 2017 05:26:20 UTC+2, Marc Aubry wrote:
>
>> Hi andrew
>> are your referring to this forecast error?
>>
>> Jan 16 22:40:27 weatherstation weewx[645]: forecast: OWMThread: OWM:
>> forecast failure: global nam
Hi .
Log already posted on this thread (more than once)
I'm now running weewx as service, but i will change it to run in console
mode and will post the output terminal
thanks
On Monday, January 16, 2017 at 7:52:45 PM UTC+7, mwall wrote:
>
> On Monday, January 16, 2017 at 6:08:37 AM UTC-5
e and forecast page . don't think they are a direct cause
> of your problem though.
>
>
>
> On Monday, 16 January 2017 13:08:37 UTC+2, Marc Aubry wrote:
>
>> Hi
>> The weewx has just stop reporting and i did a lsusb command and it look
>> the same then bef
Hi,
on all my headless rpi, I do install vncserver and Screen for ease of
remote acess.
On Monday, January 16, 2017 at 5:11:35 PM UTC+7, pon...@gmail.com wrote:
>
> I have a Raspberry Pi 3 lined up to replace my original Pi, which I'll
> recycle.
>
> Pi users, what are your MUST ADD packages
Hi,
Thanks for this info
i have listed the usb devices with lsusb
Bus 001 Device 004: ID 10c4:8468 Cygnal Integrated Products, Inc.
Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9512/9514
Fast Ethernet Adapter
Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp.
Bus
Hi,
I have a similar problem with weewx 3.6.2 and forecast 3.2.9 but on
sofaskin
the single table is one size bigger than normal on my other config with
weewx 3.2.6 and forecast 3.08 and sofaskin.
maybe something has changed in the forecast_table.css ???
On Saturday, January 7, 2017 at
g at a time though as it really does make problem identification so
> much easier
>
>
>
> On Saturday, 7 January 2017 06:29:49 UTC+2, Marc Aubry wrote:
>
>> Hi guys,
>> Little update about my situation after Christmas new year break.
>> Happy new year to
Hi guys,
Little update about my situation after Christmas new year break.
Happy new year to all of you.
first of all to avoid to monitor constantly the weewx rpi during that busy
period for us, i setup a CRON reboot every hour on the Rpi, it's just
hiding the problem and doesn't help to find a
h that proposal is counter-intuitive and not good practice.
>
>
>
>
>
> On Wednesday, 28 December 2016 04:51:46 UTC+2, Marc Aubry wrote:
>
>> done.
>> i'm running a screen bash weewx session and monitor it until it stop.
>> thanks.
>>
>> My config is prett
hardware related i
don't see the point to maintain a buggy system and i'll keep it up running
until i can validate my new rpi3 dev platform to switch it in prod platform.
On Wednesday, December 28, 2016 at 9:14:26 AM UTC+7, Marc Aubry wrote:
>
> hi
> do i have to rename it wh23xx.p
hi
do i have to rename it wh23xx.py in /usr/share/weewx/user
or i just copy it like that.
i guess that i have to rename it :)
On Wednesday, December 28, 2016 at 8:26:32 AM UTC+7, mwall wrote:
>
> marc,
>
> the problem is that pyusb/libusb should timeout when a write/read fails,
> but that is
c)*
*Dec 28 00:05:02 weatherstation weewx[1647]: wh23xx: rain_rate: {'value':
0.0} (0x0e 0x0e)*
On Wednesday, December 28, 2016 at 12:49:35 AM UTC+7, mwall wrote:
>
> On Tuesday, December 27, 2016 at 12:09:56 PM UTC-5, Marc Aubry wrote:
>>
>> 22:18 weewx stop reporting
>>
wx/user/wh23xx.py", line 372, in _get_current*
*return self._station.get_current()*
*KeyboardInterrupt*
This time manage to start it with sudo weewxd /etc/weewx/weewx.conf
no need to reboot
On Tuesday, December 27, 2016 at 3:46:18 PM UTC+7, Marc Aubry wrote:
>
> ok
> done
*sudo wee_extension --install weewx-wh23xx.zip*
i probably did something wrong...
i just run the weewxd from a screen bash and will wait for the next problem
thanks
On Tuesday, December 27, 2016 at 1:58:07 PM UTC+7, mwall wrote:
>
> On Tuesday, December 27, 2016 at 1:26:05 AM UTC-5, Marc
, line 365, in _get_current*
*time.sleep(self.retry_wait)*
*KeyboardInterrupt*
On Monday, December 26, 2016 at 10:06:53 PM UTC+7, mwall wrote:
>
> On Monday, December 26, 2016 at 9:15:48 AM UTC-5, Marc Aubry wrote:
>>
>> 19:37 crash
>> yes i can se
19:37 crash
yes i can see some cron task on the syslog
And yes weewx still appear in ps -aux
See below.
pi@weatherstation:~ $ sudo tail -f /var/log/syslog
Dec 26 19:37:10 weatherstation weewx[600]: wh23xx: rain_totals: {'value':
626.1} (0x14 0x14)
Dec 26 19:37:10 weatherstation weewx[600]:
Hi
Thanks for your help.
I'll be monitoring ps -aux the next crash. So fare no more crash after the
morning crash.
I think my network is all clear and good now.
This is my plan to try to solve the problem.
I'm going to set up a clean install on rpi3/jessie running with the simulator.
I need to
-af476462e75b
On Monday, December 26, 2016 at 3:26:35 AM UTC+7, mwall wrote:
>
>
>
> On Saturday, December 24, 2016 at 1:27:01 AM UTC-5, Marc Aubry wrote:
>>
>> this morning crash syslog (see attachfile)ed
>> the weewx has stop working from 8:37 to 1:30 until i reboot the
hi andrew.
Thanks for your reply,
You are probably right i should start again from a fresh install and slowly
put it on load by adding functionalities.
The problem of that approach is the time it's going to take to achieve my
goal. i have sometime 1 crash per day, sometime two crashes per day.
etworking. If I get a lease on my internal
> network using ipv4 alone I'm happy, as is the network.
> Having said that, your network problems could be due to anything.
>
> Happy hunting
>
>
>
> Cheers
> Glenn
>
> rorpi - read only raspberry pi + weewx: now with scripts
I'm running weewx on rpi2 only
i'm using sudo service weewx stop and sudo service weewx start to
stop/start weewx service
On Saturday, December 24, 2016 at 4:24:09 AM UTC+7, Dan'l B wrote:
>
> I giving the setup.py install a trial run and have one puzzle: once
> started manually (all works
yesterday i did change the SD card but weewx stop working the same.
On Friday, December 23, 2016 at 2:53:44 AM UTC+7, vince wrote:
>
> On Thursday, December 22, 2016 at 11:00:57 AM UTC-8, Andrew Milner wrote:
>>
>> Matthew - thanks for the correction. I was hoping that you would
>> eventually
ust 'freezing'. I still, to
> this day, have not resolved what causes the failures. The difference ijn
> my setup is that I was running wheezy and when it froze I could notget in
> via ssh either.
>
> On Thursday, 22 December 2016 19:35:03 UTC+2, mwall wrote:
>>
>> On Wedn
if i disable the forecast search list extension am i going to loose the WU
and Zambtretti forecast?
i'll give a try on my next monitoring. right now i have change the SD card.
next try will be to change the power supply, so maybe on the next next try
:)
i have already implemented the debug= 1
n problem between the wh2310 and the weewx driver but i'm
reluctant to do that because of the lost of recording data during that test.
.
>
>
>
>
>
> On Wednesday, 21 December 2016 13:40:59 UTC+2, Marc Aubry wrote:
>
>> Hi,
>> The weewx is a new install from les
Hi,
The weewx is a new install from less than a month, when i set up my new
WH2310 weather station. The data before that have been imported in weewx
with the weewx import tool from cumulus archive file from a WR200 oregon
scientific. The sensor pole of the WRM200 became loose and the sensor
eport /etc/cron.hourly)*
On Wednesday, December 21, 2016 at 1:05:20 PM UTC+7, Andrew Milner wrote:
>
> Does the log not give you some clues as to what is happening?
>
> Post the log here so we can take a look.
>
>
>
> On Wednesday, 21 December 2016 07:15:50 UTC+2, Marc Aubry wrote:
>
&g
://web.cubadak-paradisovillage.com/weather
any assistance will be welcome
On Saturday, December 17, 2016 at 7:49:59 AM UTC+7, Marc Aubry wrote:
>
> Hi,
> The sever hasn't crashed last night, so the problem seem to be solved.
> to solve it i did the following:
>
> *s
in 5, or 198mm in 15 mins = 66 in 5
>
>
>
> On Saturday, 17 December 2016 06:37:36 UTC+2, Marc Aubry wrote:
>
>> by Metric i mean that my database and reports use mbar, knots, mm
>> according to the weewx config file.
>> i don't know the difference between METRIC and
any data that has more than 300 cm
> of rain in an archive period. Unless your archive period is unusually long,
> you could probably make it as little as 1 cm.
>
> -tk
>
> On Fri, Dec 16, 2016 at 4:59 PM, Marc Aubry <marco...@gmail.com
> > wrote:
>
>> hi,
PM UTC-5, Marc Aubry wrote:
>>
>> Hi
>> how do i know which version of the wh23xx driver i'm running? it's should
>> be in user.wh23xx but i can't find the location.
>>
>
> the driver version is reported in the log soon after weewx starts up
>
> or you
Oups sorrry.
i didn't refresh properly mthe page in my browser.
The problem is solved.
rebuilding the table was the solution...
thanks
On Friday, December 16, 2016 at 2:44:54 PM UTC+7, Marc Aubry wrote:
>
> I just rebuilt the daily table just in case. but i had already deleted
> th
-wh23xx.zip
and restart weewx
On Friday, December 16, 2016 at 9:14:07 AM UTC+7, mwall wrote:
>
> On Thursday, December 15, 2016 at 9:00:03 PM UTC-5, Marc Aubry wrote:
>>
>> weewx stop reporting few times per day and probably crash because nothing
>> appear in the sy
the old now retired RPi2 has just been idling along since
> being retired.
>
>
>
> On Friday, 16 December 2016 04:00:03 UTC+2, Marc Aubry wrote:
>
>> Hi
>> i'm running weewx 3.6.2-1 on a raspberry pi 2 connected to the lan via
>> cable and a deported mysql da
Hi
thanks for the tip.
i just run weewx under a screen bash and will monitor it.
:)
On Friday, December 16, 2016 at 9:14:07 AM UTC+7, mwall wrote:
>
> On Thursday, December 15, 2016 at 9:00:03 PM UTC-5, Marc Aubry wrote:
>>
>> weewx stop reporting few times per day and prob
hi
i have a wrong total rain value on the monthly and year report.
for the 05th december 2016 it show 33554455 mm of rain.
http://web.cubadak-paradisovillage.com/weather/NOAA/NOAA-2016-12.txt
http://web.cubadak-paradisovillage.com/weather/month.html
Hi
i'm running weewx 3.6.2-1 on a raspberry pi 2 connected to the lan via
cable and a deported mysql database server hosted on ubuntu linux computer.
weewx report on local webserver hosted on the same rapberry as the weewx
server and on a ftp server at the following:
I answer my own question
it work perfectly for the 3 forecast.
The WU 3 days forecast
the 6 hour WU forecast
The zambretti forecast
in addition of the mwall previous post
i have just add the following code under the .inc include
*#set $periods = $forecast.weather_periods('WU',max_events=6)*
*#if
Thanks mwall.
It work for the 3 days WU forecast with the icons.
Now i have to integrate the WU 6 hours forecast (the one in text)
and the Zamberetti forecast.
Should i copy the table as shown in the forecast/index.html.tmpl ?
do i have to modify the skin.cof to include those 2 forecast?
i think
(same thing with
Standard skin or sofaskin skin)
before i change the directory of the report i had the normal index file
display.
I probably mess up something in the weewx.conf and the skin.conf but i
can't figure out what?
On Thursday, November 24, 2016 at 12:01:20 PM UTC+7, Marc Aubry
Hi,
I'm running weewx 3.6.2 deb package on a raspberry pi2 with a WH2310
weather station connected with the wh23xx (TyconTP2700).
archives are hosted on external mysql database (on the same lan).
everything works fine with standard and sofaskin templates.
I have installed wee-forecast-3.0.8 and
48 matches
Mail list logo
