That is an interesting observation. Any idea why?  What was the material used to
stir with?

Marshall

Tel Tofflemire wrote:

> Ole Bob,
> Respectfuly...I have used a stir'er and now a bubble'er to mix CS...The
> difference is: stired colloidal silver will always  have a decreasing ppm
> reading , and a darker color change to yellow'ish with age. Bubbled CS will
> always (most always) stay clear, and keep the same reading for months, maybe
> forever?  Just my observaton.
> Tel Tofflemire
> Phoenix, AZ
>
> Gaston wrote:
>
> > Hi "Ole Bob"
> >
> > I see the reply from Ivan about CS that will probably read
> > higher when using a bubbler instead a stirrer.
> >
> > Have you had a chance of comparing the two to prove that pls ?
> >
> > I presume that Ivan has done so.
> >
> > Gaston
> >
> > =====================================================
> > ----- Original Message -----
> > From: "I Anderson" <[email protected]>
> > To: <[email protected]>
> > Sent: Friday, January 18, 2002 3:46 AM
> > Subject: RE: CS>questions: stir vs. bubble
> >
> > > Connie,
> > >
> > > A couple of thoughts come to mind:
> > >
> > > The stirrer does not mix too well.
> > > You are trying for too high a concentration.
> > > The bubbler introduces CO2 gas to the water, which will ionise and
> > > give a false (high) reading.
> > >
> > > If you are finding a change in the CS when exposed to light then it is
> > > possibly due to the quality of your water.
> > >
> > > Regards
> > > Ivan.
> > >
> > >
> > > > -----Original Message-----
> > > > From: Connie [mailto:[email protected]]
> > > > Sent: Friday, 18 January 2002 11:48 a.m.
> > > > To: silver- list
> > > > Subject: CS>questions: stir vs. bubble
> > > >
> > > >
> > > >
> > > > I have the SG6-very happy with my generator.
> > > > I have done some experiementing with the way I make my CS.
> > > >
> > > > I would like to compare my brew with stirring vs. bubbling and
> > > please
> > > > comments as too the differences.
> > > >
> > > > I use a 64 fl. oz. coffee creamer container to make my CS.
> > > >
> > > > Some days...using the stir....it seems to take longer. Not
> > > > observant enough
> > > > to say why one day is different vs. another.
> > > >
> > > > Here are the comparisons of the last two batches made:
> > > >
> > > > --First brew:
> > > > Stirred batch.
> > > > Seeded, ppm per Hanna PWT 4ppm.
> > > > I cleaned electrodes (with heavy build up) 3 x's during the brew.
> > > >
> > > > After 36 hours of generation...the ppm per Hanna was about
> > > > 18ppm. Indicator
> > > > light, indicating that the brew had not reached 20pppm (as
> > > > dialed) was still
> > > > on.
> > > > My stirred CS ALWAYS reads a lower number the next day, when
> > > > retested. Often
> > > > I will turn the generator back on, let it run again until the
> > > > indicator
> > > > light goes off.
> > > >
> > > > Allowed the brew to sit overnight. A lot of precipitate in
> > > > the container.
> > > > Did not bother to retest the ppm. ( I expected it to be lower
> > > > than what
> > > > measured the night before)
> > > > I gave up on that brew...used it in the bathwater....
> > > >
> > > > --Second brew:
> > > > Bubbled batch-stirrer removed.
> > > >
> > > > Seeded DW ppm at start 4ppm.
> > > > 10 hrs. later: indicator light off.
> > > > I did not clean the electrodes at all.
> > > > I shut down the generator.
> > > > Did not test the ppm.
> > > > left til this AM, testing ppm with Hanna, the ppm is 26ppm.
> > > > (set at 20ppm)
> > > >
> > > > Some, but little precipitate....electrodes with little build up.
> > > >
> > > >
> > > > My observed main points
> > > >
> > > > -bubbled CS consistently more stable after brew sits (ppm's
> > > > do not fall from
> > > > one day to the next)
> > > > -bubbled CS consistently has less build up on the electrodes, less
> > > > precipitate in the container.
> > > > -bubbled CS consistently able to achieve higher ppm (per Hanna)
> > > > -occassionally will get pale yellow CS with stir, never with bubbled
> > > > -consistently stirred CS will turn ashen with even minimal exposure
> > > to
> > > > light, bubbled does not seem to (I have not specifically
> > > > ''tested'' this.)
> > > > -brew time for higher ppm's consistenly quicker with bubbler.
> > > > (this case 36
> > > > hours for less than 20ppm stirred vs. 10 hrs. for 26ppm bubbled)
> > > >
> > > > I have no clue why such a difference. I know Ole Bob you do
> > > > not like the
> > > > bubbler, I believe also Trem that you prefer stir....
> > > >
> > > > Could someone explain some of these differences for me...in
> > > > terms I could
> > > > understand....
> > > > and if bubbling is not good, why....when it appears to make a better
> > > > product?
> > > >
> > > > TIA
> > > > Connie
> > >
> > >
> > > --
> > > The silver-list is a moderated forum for discussion of colloidal silver.
> > >
> > > To join or quit silver-list or silver-digest send an e-mail message to:
> > > [email protected]  -or-  [email protected]
> > > with the word subscribe or unsubscribe in the SUBJECT line.
> > >
> > > To post, address your message to: [email protected]
> > > Silver-list archive: http://escribe.com/health/thesilverlist/index.html
> > > List maintainer: Mike Devour <[email protected]>
> > >