Stus-List Re: raw water filter set up for C 35 MkI

Glen - I had a bronze and glass strainer basket - maybe groco - on my 33-2.  I sailed out of Whitby ON and the strainer did its job in shallow, weedy places like Frenchman’s bay and presquile bay.    Glad I had it.   Dave Sent from my iPhoneOn Apr 8, 2024, at 11:43 AM, Matthew Wolford via CnC-List

Stus-List Re: Bilge pump breaker issue

Use a multimeter to measure resistance, +12v to  ground, from the load (pump) side of the breaker, with the breaker open, and the float switch open.   It should show infinite resistance.  If it shows very low or no resistance, you have a short.  Disconnect the pump/switch.    If the problem

Stus-List Re: Hints on swapping winches?

Make your own ‘glass backing sheets http://cncwindstar.blogspot.com/2015/12/making-fibreglass-parts.html?m=1 Dave - ex 33-2. Windstar On Fri, Mar 22, 2024 at 8:26 PM Joel Aronson via CnC-List < cnc-list@cnc-list.com> wrote: > Don’t use plywood. Aluminum or G10. > > Joel > > > > On Fri, Mar

Stus-List Re: Propeller Strut

If it's just about fairing, I would prepare the area religiously, and use epoxy with fillers of choice, definitely including some glass fibres for strength. If you load the resin with glass it will be a b1tch to sand, so make sure you level it when it has gelled but not fully cured. A super

Stus-List Re: [EXTERNAL] Re: Lithium vs AGM

I’ll add (from experience) that  if you are daysailing and otherwise plugged in at the dock, you can (unwittingly) do without an alternator for quite some time as well….    Dave Sent from my iPhoneOn Feb 20, 2024, at 11:06 AM, Richard Bush via CnC-List wrote:Joe, thanks for the reassurance on

Stus-List Re: Lithium vs AGM

C 33 mark ii Windstarcncwindstar.blogspot.comHere are a series of posts documenting my experience with exactly the same upgrade.  In a nutshell, 175w  of solar and 200ah of lithium house bank allowed me to be off the grid May and September.   (Toronto area, fridge running).   I think this is a

Stus-List Re: C Corvette 31

The corvette tugged at my heartstrings before I bought Windstar, and I had a chance to look at several.They are quite a bit "rougher" than later boats (more like smaller boatyard's' stuff) and there were a few issues I saw across several examples. Check the glassed-in knees where the shrouds

Stus-List Re: C 37 Rudder post assembly

Or drill and tap the same collar, rotating the holes?Or re-drill  the same holes and tap and use a larger screw?Dave ex-33-2 windstar Sent from my iPhoneOn Dec 9, 2023, at 12:56 PM, David Risch via CnC-List wrote: Richard…I am sure a competent machine shop can replicate?   From: Matthew

Stus-List Re: [EXTERNAL] Re: Sizing an inverter

Chuck - do some research on lithium, they are way cheaper now than even a year or two ago. I’m in curacao at the moment refitting my new boat and am installing two 230ah LiFePo batteries. As others have said you need to determine the math regarding the ac. I’d strongly suggestadding a 3rd

Stus-List Re: No Traffic

Sold Windstar (still sad) and working on the new boat’s refit and associated logistics, so only lurking….  Weirdly, That panic stop story reminds me of a friend’s cocker spaniel- it would get so excited when greeting anyone it would lose control and dribble all over their  their shoes.   We

Stus-List Re: [EXTERNAL] Re: Centerboard cable diagnostics or replacement

No dog in the fight or direct experience with this model, but have you studied how the CB is installed? Does it have a bushing around the pivot that could have failed? Does it have guides or shims in the case that should limit the lateral movement you describe?When the cable was replaced

Stus-List Re: Lithium battery source in USA?

the money.JoelOn Mon, Aug 14, 2023 at 10:33 AM Dave S via CnC-List <cnc-list@cnc-list.com> wrote:Hello all, Looking to upgrade my new boat from agm to lithium and am wondering if anyone can recommend a source (industrial?) for LiFePo batteries.  Thanks! Dave ex- 33-2 Windstar Now alubat OVNI 435

Stus-List Lithium battery source in USA?

Hello all, Looking to upgrade my new boat from agm to lithium and am wondering if anyone can recommend a source (industrial?) for LiFePo batteries. Thanks! Dave ex- 33-2 Windstar Now alubat OVNI 435 Sakura Sent from my iPhone Please show your appreciation for this list and the Photo Album

Stus-List Age reversing C for sale

Good evening all, As I am now the owner of two boats, I am reluctantly offering Windstar, my C 33 mk ii for sale. Details here: Windstar4sale and of course on the blog shared many times over the last decade. Thanks, Dave 33-2 Windstar. Please show your

Stus-List Re: Shore Power Adapters.

The reason an adapter is not made from 30a to a lesser amperage is that this would be in violation of the electrical code (or codes and standards) as the 20a rated device would be intended for use on a circuit protected by a 30a breaker. Such a device would not receive csa or ul approval for

Stus-List Re: Insurance for larger boat - 15 foot increase maximum?

I had unexpected challenges insuring my new boat, and in the end was finally able to overpay for minimal coverage.  Through the process I spoke with several brokers and got a sense of the climate.     Each carrier has its own quirks, rules and inclinations but overall I was left with the

Stus-List Re: Fuel lift pump 30-1, clean or replace with electric?

Nate - for what it’s worth, you might first try replacing the 42 year old pump with another that might last just as long. This is the simplest fix, the pumps work well, are quite long lived, and have providing for manual operation to bleed the system. I can’t really see an advantage to an

Stus-List Re: Engine strangeness

Hadn’t thought of it before but even with a diesel this is a good reason to stick with a stock mechanical fuel pump if so equipped. I’ve mused about ‘improving’ my yanmar 2GMF20 but in stock form it has been very reliable. Its fuel pump lived a long life and started seeping as a warning. (I

Stus-List Re: Dead Battery Charger

Just went through this on my new boat. While it really depends on how you intend use the boat, I would consider an inverter/charger and provide for an eventual upgrade to group 31 lithium batteries and a dedicated AGM start battery. I chose the Victron Multiplus 12/1600/70 Dave 33-2

Stus-List Re: Force 10 Stove

As part of my OVNI 435 refit I purchased a new force 10 stove and retrofitted from camping gaz to propane. (Cooked my first meal last night - sweltering on the hard in curacao). If you study force 10’s home page (or manual) you should be able to find the 10 or so ‘standard’ sizes. (If there

Stus-List Re: Engine strangeness

I’ll chime in with an oddball problem, missed by two local diesel mechanics. Universal diesel, would rev with no load but would not rev with any sort of load. This had been a problem for the owner (and his frightened wife) for several years. I worked for about three weeks on this one - After

Stus-List Re: Engine strangeness x 2

First problem - electrical in ignition. Second - gas engines race when they lean out, then die. This was a great feature in little pit bikes with centrifugal clutches - an unexpected launch before running out of fuel. Could be a fuel supply issue. Sent from my iPhone > On Jun 13, 2023,

Stus-List Re: Engine strangeness king of drama

Lol…. Chuck - Drama Is the stuff of queens not kings! Dave - Was going to join in but there was already enough help. I will say though that ‘getting intimate’ with the engine is always worthwhile. There was obviously a problem and (imo) it’s worth working through the fuel system to make it

Stus-List Re: Chainplate bedding

an Humphreys > Telamon Technologies, Inc. > POB 396, Rockport, ME 04856 > 207-763-4691, mobile: 207-542-2312 > adri...@telamontech.com > > > >> On Jun 3, 2023, at 10:30 AM, Dave S via CnC-List >> wrote: >> >> The design on the 33-2 chainplates is pr

Stus-List Re: Chainplate bedding

The design on the 33-2 chainplates is pretty good- actually I haven’t seen better - imho. I won’t try to describe it but you remove the bolts, the top plate (and bottom if you wish) clean both up, (I polished mine, couldn’t help myself) clean up the deck and rebed with butyl. It was done

Stus-List Re: ABYC Propane standards

Going through this as well. Your surveyor and insurance company will likely recommend a gas detector and a solenoid switch. Dave Sent from my iPhone > On May 31, 2023, at 1:23 PM, Doug Mountjoy via CnC-List > wrote: > >  > I'm swapping out my old CNG 2 burner stove for a propane unit.

Stus-List Re: Underway diesel fix - long read

Dennis, Andy, thanks for the comments. I have a very long and growing body of info, itemizing projects for the new boat. Dave Sent from my iPhone > On May 28, 2023, at 8:30 AM, Dennis C. wrote: > >  > Dave, > > Yes, the Racor 500 gasket can be an issue. A new gasket and o-ring should

Stus-List Re: Underway diesel fix - long read

Thanks Dennis, nice shade-tree mechanical work! Knowledge and preparation. It’s always interesting to understand the failure modes of things. I’ve intentionally kept my yanmar stock - stock fuel pump, single fuel filter, no start relay. It has had a few small fuel leaks and one

Stus-List Re: Question and Report

I think Aluminum is OK for diesel, I would also check industrial or automotive metal tank fabricators. I had a custom aluminum fuel tank made for a Lotus Europa years back and it was easy to source and buy. Dave On Tue, 9 May 2023 at 10:42, Bill Coleman via CnC-List < cnc-list@cnc-list.com>

Stus-List Re: Gelcoat match supplier

https://compositescanada.com/ Dave Sent from my iPhone > On May 6, 2023, at 7:53 PM, Joel Delamirande via CnC-List > wrote: > > Good afternoon gentlemen > I know this was a subject mentioned in the past > I looking for a supplier for yellow gelcoat > For C 30 1974 mk 1 > -- > Joel

Stus-List Re: Bulkhead tabbing 37/40

In case it helps. http://cncwindstar.blogspot.com/2019/07/deck-fill-core-removal-and-reinforcement.html?m=1 Dave - 33-2. Sent from my iPhone > On May 6, 2023, at 6:34 PM, rockland bazemore via CnC-List > wrote: > >  > In heavy seas we're getting some movement and squeaking of the forward

Stus-List Re: 33-2 Spinnaker Track on Mast

Good decision. Dave On Tue, 11 Apr 2023 at 13:15, andrew--- via CnC-List wrote: > OK I did the right thing. I abandoned the track, bit the bullet, and > purchased the original new slider from Holland Marine - thanks Paul for the > tip. I should be able to return the slider at least. > > I

Stus-List Re: 33-2 Spinnaker Track on Mast

Andrew, the item in the pic is very similar to what was installed originally (and remains, working well) on my 33-2. There are other parts also as there is a continuous line for controlling it. (Memory vague - I don’t think much about it - it just works). I tried to photograph it for you

Stus-List Re: Bringing lines back to Cockpit.

and winch are crucial too. It's > all about getting the best performance and longest life from your equipment. > > > Chuck Scheaffer Resolute 1989 C 34R, Annapolis > > > > > >>> On 03/30/2023 3:49 PM Dave S via CnC-List wrote: >>> >>>

Stus-List Re: Bringing lines back to Cockpit.

Double check the orientation and total operating footprint consumed by the line clutches before you proceed, especially if they will live under a dodger. Sent from my iPhone > On Mar 30, 2023, at 2:11 PM, Bob Mann via CnC-List > wrote: > >  > I did this on my 35-1 (called Mystic). I

Stus-List Re: [EXTERNAL] Lifeline safety netting

Fwiw I don’t think the netting would be of much use in protecting an adult. Good for sails, Maybe pekineses. I had custom Jacklines made by a company called cargo trade supply, and I pin them through the toerail with carabiners. In the material handling trade the Jackline it’s called a

Stus-List Re: To sell or not to sell

Thomas - If you’re happy with the 29 and have invested a lot, keep it and truck it. If you intend to sell it, sell it there. If your 35-3 doesn’t work out, I will be putting windstar up for sale in a month or so. 33-2 in very (extremely) good condition, many upgrades, needs nothing.

Stus-List Re: Bomar hatch refurb update

ls. New frame, new hardware, new hinges, new lever locks, etc. >> But that's just my two cents. >> >> Chuck S >> >> >> >>> On 03/26/2023 6:29 AM David Swensen via CnC-List >>> wrote: >>> >>> >>

Stus-List Re: Bomar hatch refurb update

3-2 > >> On Sun, 26 Mar 2023 at 06:29, David Swensen via CnC-List >> wrote: >> Dave, Where did you source your 3/8 acrylic? Is it cast and is it 2074? >> Thanks, >> David Swensen >> Freya 35MK3 >> Beverly, MA >> >> Sent from my i

Stus-List Cored hulls and repairs

Interesting article given recent discussions here.

Stus-List Re: Bomar hatch refurb update

rom my iPhone > > On Mar 25, 2023, at 9:11 PM, Dave S via CnC-List > wrote: > > https://cncwindstar.blogspot.com/2022/10/hatch-refurbishment.html?m=1 > > Dave - 33-2 > > Sent from my iPhone > Please show your appreciation for this list and the Photo Album site and

Stus-List Bomar hatch refurb update

https://cncwindstar.blogspot.com/2022/10/hatch-refurbishment.html?m=1 Dave - 33-2 Sent from my iPhonePlease show your appreciation for this list and the Photo Album site and help me pay the associated bills. Make a contribution at: https://www.paypal.me/stumurray Thanks for your help. Stu

Stus-List Re: [EXTERNAL] Re: Landfall 43 opinions

Probably a good call Shawn- if you see dubious mods and substandard work in the brokerage listing there is no doubt plenty more yet to find. Sent from my iPhone > On Mar 23, 2023, at 5:16 PM, Shawn Wright via CnC-List > wrote: > >  > Thanks, all for the feedback on the LF43. We have

Stus-List Re: Source for Lower lifeline bushings?

> On Mar 20, 2023, at 8:03 PM, Dave S via CnC-List > wrote: > >  > I have replaced Windstar's (33-2) lifelines, and need to find replacement > bushings. The originals have n ID of .309, the replacements I've seen are > either too large (OD) or too small (ID). Does

Stus-List Source for Lower lifeline bushings?

I have replaced Windstar's (33-2) lifelines, and need to find replacement bushings. The originals have n ID of .309, the replacements I've seen are either too large (OD) or too small (ID). Does anyone have a source for original sized bushings? Thx. Dave Please show your appreciation for

Stus-List Re: Landfall 43 opinions

Interesting and you’ve obviously thought it through. Great fun looking and pondering. I do struggle with the ‘80s centre cockpit types, for reasons I mentioned, despite feeling otherwise at one point. (And really wanting to love and buy an amel super maramu before locking in on the OVNI).

Stus-List Re: Landfall 43 opinions

Shawn - Fwiw - I’ll chime in having spent many years going through this, and having gotten comfortable with the various trade offs and just closed the purchase of my next boat (alubat OVNI 435….) I’ve accepted that Driving the OVNI will be more G-Wagen than Lotus… IMO Any c is pretty moderate

Stus-List Re: Forward Hatch Handles

Thanks for the kind words Chuck. I’m happy with the result. Dave Sent from my iPhone > On Mar 12, 2023, at 11:32 AM, CHARLES SCHEAFFER > wrote: > >  > Hey Dave, > I read through your hatch replacement project and see some beautiful work > that you can be very proud of. > > Chuck S

Stus-List Re: winch mounting project

David - I sail windstar singlehanded a lot, and don’t have a self tailing halyard winch.  Just use a line clutch.  I raise it by hand, and finish with the winch, tailing it myself.   I have a bank of clutches on either side of the cabin top and these tail halyards, reefing lines, my topping lift,

Stus-List Re: Furling Sail C 35 Mk I

I had a number 2 made by rolly tasker sails, sized between the 1 and 3 I already had. Dimensions here: https://cncwindstar.blogspot.com/2021/01/sail-inventory.html?m=1 I never use the 140 any more, I set the drifter instead. The #2 is perfect for most conditions here in the Toronto area but

Stus-List Re: Racing at night

Lol…. Really great writeup Martin, thanks. For my fellow mere mortals I’ll chime in to support for the masthead light/windex reflector approach. I discovered it by accident one blustery night, works well. Dave 33-2 windstar. Sent from my iPhone > On Feb 26, 2023, at 5:47 PM, Martin

Stus-List Re: Boats to avoid; formerly- Boatless again

This is a Betty/Veronica conversation….for those of a certain age. (Lol.) Build Quality aside, This fun discussion is totally dependent on how you wish to use the boat.I’m in the process of buying my next boat - an alubat ovni - and I’m sure it’ll sail like a barge compared to my c 33ii.

Stus-List Re: Shower

The 33-2 has an arrangement like its predecessor- the 34. I would definitely not want a discharge into the keel sump/bilge. the water travels via the spider and finds it’s way elsewhere. Worth devising another arrangement. I’m in the process of purchasing an alubat ovni (Aluminum) and it

Stus-List Re: Replacing cabin windows

Here’s an unfinished blog post https://cncwindstar.blogspot.com/2019/09/totally-crazed-portlights-and.html?m=1 Dave - 33-2 Windstar Sent from my iPhone > On Feb 9, 2023, at 4:05 PM, CHARLES SCHEAFFER via CnC-List > wrote: > >  > That's not a bad price. I paid $1000 US for just the

Stus-List Re: East coast boat yards?

ooking to purchase? > Danny > > On Jan 5, 2023 5:40 AM, Dave S via CnC-List wrote: > Thanks Andrew and all others who responded with excellent info. Just walked > away from one potential purchase, but there are many others out there... > Will be reaching directly out once I pull

Stus-List Re: East coast boat yards?

gt; Lovely anchorages around there, too. > Andy > > Andrew Burton > 26 Beacon Hill > Newport, RI > USA 02840 > > +401 965 5260 > https://sites.google.com/site/andrewburtonyachtservices/ > > > > On Jan 2, 2023, at 17:16, Dave S via CnC-List > wrote: > &g

Stus-List Re: 1979 36-1 Cockpit Flexing

My 33-2 is stiff and solid, I would be surprised if a similarly-built boat would bounce. Dennis suggest a few excellent approaches to repair however I would suggest first checking how it was built at the factory, and what might have failed. Any deck I’ve worked on had some sort of flat core

Stus-List East coast boat yards?

Contemplating my next boat and have realized that sailing is best enjoyed in a place that isn’t frozen. Am looking to purchase a boat - likely in the Caribbean, with the intention of cruising farther afield in 2-3 years. The border services (taxation) folks in my beautiful native Canada are

Stus-List Re: [EXTERNAL] Battery question

Also- this is a very good time to confirm that things are fused correctly. That would be one heck of a short circuit…. Dave Sent from my iPhone > On Dec 29, 2022, at 10:07 AM, Della Barba, Joe via CnC-List > wrote: > >  > The batteries need to be all the same type, you can’t mix

Stus-List Re: Encapsulating keel

I’m not sure I’d encapsulate the keel…. A lot of work and In the event of a grounding the glasswork could be damaged and would admit water and this would eventually create a mess. I view the metal bolt-on keel as an advantage in this regard. My first boat was a steel-plate swing keeled

Stus-List Insurance on boat in abc islands or Grenada ?

Hi all, looking to purchase my next boat and am wondering if someone can recommend an insurer? I am in Canada, the boat would be either on the hard or a mooring in a warm place…. Thanks! Dave 33-2 windstar Sent from my iPhone Don't forget to show your appreciation and help pay the bills.

Stus-List Re: Fuel cap

Here you go: https://cncwindstar.blogspot.com/search?q=RC=1 Dave, 33-2 Windstar Sent from my iPhone > On Nov 21, 2022, at 12:34 PM, Peter McMinn via CnC-List > wrote: > >  > Hi Alan, > > Sorry for the 10 year old thread response here. I have the same > question—Replacement caps for RC

Stus-List Re: charger/inverter

Pete - when I researched this there were very few that had a lithium-specific output, however the AGM charge profile was recommended. (Lithium specific may not be necessary) This was useful because I could use my existing charger, which offers 3 charge profiles, but cannot simultaneously

Stus-List Re: Minimum list of Tools to be kept onboard a boat

Brass-headed mallet. Forgot that…. Sent from my iPhone > On Nov 10, 2022, at 8:32 AM, Matt Wolford via CnC-List > wrote: > >  > Depending on how you use your boat, there may be a difference between what > you have onboard and what you have in your dock box (or car). > > Following up on

Stus-List Re: Minimum list of Tools to be kept onboard a boat

100% On the hand drill. Good quality wrenches, sockets, screwdrivers, Allen keys Volt ohmmeter Strong magnet Silicone guideline tape Small pry bar (alternator belt tensioning) Cable ties Tons of fasteners, hardware bits, other tapes, 5 minute epoxy in syringe. Small vise grips with cutter, slip

Stus-List Re: 3M 4200

Breaking the seal….. Possibly the insertion of a putty knife(s) and the thoughtful application of heat would slowly break the seal. Thankfully mine were bedded in butyl. Hatch rebuild currently underway: http://cncwindstar.blogspot.com/2022/10/hatch-refurbishment.html?m=1 Dave - 33-2 windstar.

Stus-List Hatch rebuild - removing silicone?

Good evening all, Have my Bomar hatches disassembled and have found an anodizing shop to refinish the cast aluminum frames. For the anodizing to be perfect, the silicone must be completely stripped from the frame. This is proving to be a bit of a hassle. Does anyone know the magic or magic

Stus-List Re: Start panel mystery

Ahhh. The old slant 6 trick….Dave - clean all your grounds and clean and tighten all connections.  The bouncing meter is a clue to an intermittent or loose connection.  It can also be a switch oxidizing or otherwise failing.    I assume you are measuring your voltage with reference to a local

Stus-List Re: bed-it butyl tape source

to not move, > more firm, like it has invisible fibers in it. (it doesn't) > > Also, diesel will dissolve it, as well as 5200 and 4200. > > Bill Coleman > Entrada, Erie PA > >> On Tue, Oct 25, 2022 at 5:26 PM Dave S via CnC-List >> wrote: >> It would be

Stus-List Re: bed-it butyl tape source

It would be interesting to compare bed-it to other butyl tapes. I find it doubtful that it has any special marine magic mojo that other quality products don’t.it is very likely Rod found a good product he trusted, has had private labelled, and has done a good job of promoting it. (Good

Stus-List Re: 33-2 companionway hatch and turtle

nionway slider and hatch boards for Persistence. They > did this for four or five boats this season and also can manufacture > replacement windows. They do good work at a reasonable cost > > Hope this helps > > Mike Hoyt > Persistence > Halifax, NS > > From:

Stus-List 33-2 companionway hatch and turtle

 Good day all. I must be looking for things to do because I'm pondering how I might improve the companionway hatch. The acrylic is crazed and requires replacement, and I've also noticed some of the turtle (fiberglass cover/housing) screws had loosened. I've disassembled it, and documented

Stus-List Schaefer rope clutch wanted

Evening all - does anyone have any schaefer rope clutches in their parts collection? Please message me with what you have and price. Thanks. Dave Windstar, 33-2

Stus-List Bomar hatch refurbishment question - latch removal

Hello all, Removed the Bomar hatches from my 1985 33ii today and it went swimmingly until I encountered a puzzle How to remove the latches from the foredeck hatch? The outer handle appears to be staked in place with a roll pin in a blind hole, and the interior handle appears to be fixed

Stus-List Re: 33-2 hatch screws?

with Lewmar ocean series hatches that turned > out to match the openings better. When we were doing this we found some > cracks in the liner/ deck moles join which we filled with gflex. > > Paul > From: Dave S via CnC-List > Sent: Sunday, October 9, 2022 9:55:41 AM > T

Stus-List 33-2 hatch screws?

Hello all, Time to consider replacing the crazed acrylic on Windstar’s 3 bomar hatches. These are fastened through the deck with Philips-head screws, and are bedded in butyl. The interior/underside of the deck is neither visible nor accessible as it is covered by the liner. What do these

Stus-List Re: engine temp gage stuck 160

Suggest you ensure the main ground (harness to a stud on the engine) is good first, this was the culprit in my case, where a few things were misbehaving intermittently. Dave 33-2 On Wed, 28 Sept 2022 at 14:19, CHARLES SCHEAFFER via CnC-List < cnc-list@cnc-list.com> wrote: > Noticed when my

Stus-List Re: C 35 MK I Keel Bolts

na-ssl.com/wp-content/uploads/2019/12/Keel_Repair_White_Paper.pdf > > Ken H. > >> On Mon, 26 Sept 2022 at 16:29, Dave S via CnC-List >> wrote: >> I’ve been following this thread a little bit, And I can’t help but wonder if >> the lead doesn’t creep a tiny bit

Stus-List Re: Fresh water pump dead?

I.ve managed to keep mine healthy also, though if not used it can go off, particularly in the hot water tank. Based on his many years' experience, my Dad advised a beginning of season flush (shock I guess) through the tank, all pumps and fittings with a high concentration of bleach/water, then

Stus-List Re: Rotella T5 - 10w30 vs 15w40?

Merci! Sent from my iPhone > On Sep 26, 2022, at 3:52 PM, dwight veinot via CnC-List > wrote: > >  > No. > >> On Mon, Sep 26, 2022 at 4:51 PM Dave S via CnC-List >> wrote: >> Does it matter in any practical sense whether I use 10W-30, which is

Stus-List Rotella T5 - 10w30 vs 15w40?

Does it matter in any practical sense whether I use 10W-30, which is available, versus 15 W 40, which was available last time I bought a jug… Yanmar 2GM…. Thx. Dave. Sent from my iPhone

Stus-List Re: C 35 MK I Keel Bolts

I’ve been following this thread a little bit, And I can’t help but wonder if the lead doesn’t creep a tiny bit over time. There’s a lot of compression involved. It wouldn’t take much to see a reduction in bolt torque. Dave 33-2 Sent from my iPhone > On Sep 26, 2022, at 2:27 PM, John Irvin

Stus-List Re: Marinco Nicro Day/Night Solar Vent motor replacement

dn’t know > the vents would be used on sailboats. > > > > *From:* Dave S via CnC-List > *Sent:* Friday, September 16, 2022 7:02 PM > *To:* Stus-List > *Cc:* Dave S > *Subject:* Stus-List Re: Marinco Nicro Day/Night Solar Vent motor > replacement > > > > Mine i

Stus-List Re: Marinco Nicro Day/Night Solar Vent motor replacement

Mine is a newer gen 3” model. 5 years old maybe, and I’d not buy another. I’ve tried my best to upgrade/repair/modify WINDSTAR in ways that are top notch, robust and reliable, and this product definitely isn’t. It still works but the slide-switch is intermittent - the cheapest junk

Stus-List Re: C 35 MK I Keel Bolts

Second that. When I rebuilt my keel sump, I had removed the keel bolts, and I figured I should Re bed the keel at the same time. The boat was on the hard and not easily accessible by a travel lift, so I raised the hull as much as I could with the six cradle pads and cleaned out the

Stus-List Re: Eight Bells for Rob Ball

RIP Rob, and thanks. For those who have not seen this, enjoy. https://m.youtube.com/watch?v=F5EUNYc_xiw Dave 33-2 Windstar Sent from my iPhone > On Sep 10, 2022, at 3:07 PM, Dean McNeill via CnC-List > wrote: > > Such sad news. > > I too have benefitted from Robs excellent design

Stus-List Re: C Steak Rub

That’s one I keep on the boat - ‘barberians’ is the brand. Easy. Also Italian seasoning or herbes de Provence, other basics. Not so basic, are sun dried tomatoes and some assorted dried mushrooms and hot peppers from the local Asian supermarkets. Couscous, risotto. Also - Look up ‘thermal

Stus-List Re: Bimini or dodger extender suggestions

Quite happy with the arrangement on my 33-2 https://cncwindstar.blogspot.com/2017/01/random-photos-hopefully-revealing-some.html?m=1 Dave Windstar 33-2 Sent from my iPhone > On Sep 2, 2022, at 2:59 AM, Dean McNeill via CnC-List > wrote: > > Anyone have a nice bimini or dodger extension

Stus-List Re: Water back flowing through the head

If no overboard discharge, If black water it’s the joker valve, if sea water the flapper. Mine does both under the right conditions. I close the raw water intake when under way, and change the joker valve every season, PLUS keeping the holding tank pumped out. Dave Sent from my iPhone

Stus-List Re: TMC galley pump installation

I did this last weekend and yes, had to remove the rubber. It is glued on the new one, but the bond can be broken by prying with a mid-sized screwdriver. It can be pulled straight off the old one. Apparently rebuild kits are available for these however I’ve not been able to locate one for

Stus-List Re: [EXTERNAL] Re: Lithium Batteries

When I brought the LiFePo batteries to the boat last spring I climbed a ladder with 2 group 31 batteries in one hand. Didn’t realize it till I was halfway up the ladder. Made me smile. For me this was a no-brainer. I could not have gotten the usable capacity I wanted in the footprint

Stus-List Re: Solar Panel on Bimini top

Yes. http://cncwindstar.blogspot.com/search/label/Solar%20and%20Batteries?m=1 Dave 33-2 Windstar Sent from my iPhone > On Jul 26, 2022, at 11:22 PM, Wade Glew via CnC-List > wrote: > >  > Has anyone figured out how to mount a flexible solar panel on the bimini top > without the panel

Stus-List Re: Engine tachometer

Mine did this as a result of a bad wiring harness ground at the engine. Dave Sent from my iPhone > On Jul 26, 2022, at 7:04 AM, David Knecht via CnC-List > wrote: > > Yesterday, I was motoring and noticed that the engine tachometer was acting > strangely. It would read 4000 rpm for a

Stus-List Re: Sad Cetol story

This is why my therapist prescribed stainless steel handrails….. ;-) Dave Sent from my iPhone > On Jul 10, 2022, at 12:41 PM, Dennis C. via CnC-List > wrote: > >  > The issue with Touche's cap rails, and any other teak fastened using bungs, > is you can't totally encapsulate them with one

Stus-List Re: Engine not turning over

While you are at this, you might check the engine ground stud for corrosion - disassemble, clean it and the terminals up, protect with dielectric grease, reassemble. Not a huge job. The harness and a bunch of other stuff grounds at this point and unreliable or high resistance grounds can cause

Stus-List Re: Yanmar 2 GMF

Good to hear. How the heck did the old one get that clogged? Bad decade for mosquitoes? Dave On Tue, 28 Jun 2022 at 22:19, Robert Abbott via CnC-List < cnc-list@cnc-list.com> wrote: > > While I awaited another day for a marine mechanic to get around to > addressing my engine problem,

Stus-List Re: Yanmar 2 GMF

I’ve troubleshot a few and for what it’s worth I’ve not seen one here with an exhaust elbow issue on the Great Lakes. This is always cited online as a trouble spot but it appears to be much less of a concern in Fresh water.The three I’ve checked were original and clear of obstructions.

Stus-List Re: Yanmar 2 GMF

Rob - just went through this with a marina neighbour’s universal - went end to end and finally found that the governor had a tired spring. The Good thing was that by the time we were done the entire fuel supply and exhaust were checked, optimized and are now known to be reliable, plus he can

Stus-List Re: [EXTERNAL] Re: Batteries again

I addressed this with a 25a dc:dc charger, works great with my 50a hitachi alternator And despite the nominal rating difference it wouldn’t surprise me if I was actually charging more quickly and efficiently than before. I do believe that the alternator will see less short term heat rise and

Stus-List Re: Batteries again

Couldn’t agree more on LiFePO for the house bank. My journey abd decision criteria here: https://cncwindstar.blogspot.com/search/label/Solar%20and%20Batteries?m=1 Dave 33-2 windstar Sent from my iPhone > On May 26, 2022, at 1:03 PM, Matthew via CnC-List > wrote: > >  > This is excellent

  1   2   3   4   5   6   >