On Tue, Jan 04, 2005 at 12:27:16PM +1100, Stephen Kühn wrote:
On Tue, 2005-01-04 at 11:50, David Reynolds wrote:
I'm pretty sure I'm buggered this time around, but maybe someone here can
help
me spot my error for next time:
Situation: Needed Windows on my computer to run some
On Thu, Dec 30, 2004 at 04:03:25PM +, Bill Winegarden wrote:
Hi,
I have been asked by my family to set up a website. The domain is all set and
a webdav account has been set up for me to upload files.
This is new to me. I have gone into MCC and there is a webdav entry under the
mount
On Tue, Dec 28, 2004 at 03:27:18PM -0600, Chris wrote:
I'm trying to re-setup my imap folders. I've got courier-imap installed and
running. Everytime I get as far as entering my mail host in the imap setup
in kmail, (earthlink.net) a few seconds later a window pops up (could not
connect
On Mon, Dec 27, 2004 at 10:14:51AM +, Graham Watkins wrote:
This ought to be easy but I can't figure it out.
How do I get the iconbox to launch with xfce4 instead of having to start
it from the command line? Is there anywhere I should put a script for
this and any other program I want
On Sun, Dec 19, 2004 at 03:39:15PM +0100, [EMAIL PROTECTED] wrote:
Hi.
I've noticed that, strangely, the effect of the command 'chgrp'
is not permanent: I did
# chgrp rodolfo /*
and then
# ls -l /
and got the following output:
[EMAIL PROTECTED] rodolfo]# ls -l /
total
On Sun, Dec 19, 2004 at 02:11:49PM +1300, SnapafunFrank wrote:
Hi
The following appears to be off topic a little, but with no response
from the mozilla forum and it being mandrake I'm trying to get my
company to run with, I'm hoping some kind soul here might take some time
out to assist.
On Fri, Dec 17, 2004 at 11:33:18PM +0100, Rodolfo Medina wrote:
Hi.
Suppose that a large text file has been slightly modified by another person,
and I want to find out 'a posteriori' what changes were done.
Is there a linux command (or set of commands) that can compare the two files
and
Mdk 9.1
MPlayer-1.0pre5try2 (from source)
all win32 codecs
I'm trying to play a stream from KGSR radio with mplayer. I can play it
at work on a Windows box with WiMP. When I try here it just hangs. If I
wait long enough I get a burst of noise every now and then. I'm on cable
so conncection speed
On Thu, Dec 16, 2004 at 09:38:49PM -0500, Todd Slater wrote:
Mdk 9.1
MPlayer-1.0pre5try2 (from source)
all win32 codecs
I'm trying to play a stream from KGSR radio with mplayer. I can play it
at work on a Windows box with WiMP. When I try here it just hangs. If I
wait long enough I get
On Thu, Dec 16, 2004 at 10:10:45PM -0500, Charles A Edwards wrote:
On Thu, 16 Dec 2004 21:38:49 -0500
Todd Slater wrote:
I'm trying to play a stream from KGSR radio with mplayer. I can play
it
at work on a Windows box with WiMP. When I try here it just hangs.
I can play it here using
On Wed, Dec 15, 2004 at 07:32:54PM -0500, Greg Meyer wrote:
Is anybody else on this list getting bombarded with virus laden e-mail from a
particular ip address in Australia?
Whoever it is is sending to the address that I use for the Mandrake lists, so
I am thinking it may be one of our
On Sun, Dec 12, 2004 at 11:30:19AM +, Paul Smith wrote:
Dear All
I am trying to install a program using the following command inside a
the script installMapleLinuxSU:
sh ./LinuxInstaller.bin
but I get the error:
bash: ./installMapleLinuxSU: /bin/sh: bad interpreter: Permission
On Thu, Dec 09, 2004 at 04:02:21AM +0100, Danesh Daroui wrote:
Hi,
I have downloaded all iso imaged of Mandrake Linux Official 10.1.
During installation, it needs KDE CD. I searched on available FTP
sites, but there was not any KDE iso image. Can anybody help ?
After futzing around with gnome in Slackware and Ubuntu I've come to
enjoy a few of the gnome games. I can't find them in 10.1 Official DE
and the machine is not on a network so I can't set up urpmi--can
somebody verify whether tetravex etc. are available in contrib or
some place?
Thanks!
Todd
On Tue, Dec 07, 2004 at 05:44:56PM +0100, Danesh Daroui wrote:
Hi,
I am migrating from Fedora Core 3 to Mandrake 10.1, but I was jut
dissapointed !!! What a garbage is this Mandrake 10.1 !!! It always
crashes and it is absolutely unstable. Did you have same problem ? Is
On Tue, Dec 07, 2004 at 07:05:08PM +0100, Danesh Daroui wrote:
Todd Slater wrote:
On Tue, Dec 07, 2004 at 05:44:56PM +0100, Danesh Daroui wrote:
Hi,
I am migrating from Fedora Core 3 to Mandrake 10.1, but I was jut
dissapointed !!! What a garbage is this Mandrake
On Fri, Dec 03, 2004 at 04:12:39AM -0800, Tango Echo wrote:
Anyone?? Or is this rocket science?
I've never used Spamassassin but I've heard that it can be a resource
hog. How much do you need it to do--virus filtering etc.? If you just
need a bayesian-type filter bogofilter is a good
On Tue, Nov 30, 2004 at 01:48:58PM -0500, BJ Tracy wrote:
Hi All,
Running MDK 10.0 and want to upgrade my box to a DVD-RW. I have looked
at the list of certified DVD's but was wondering if there is really a
compatibility problem with any new DVD-RW out of the box.
I'm looking to do the
On Tue, Nov 30, 2004 at 04:40:11PM -0500, Todd Slater wrote:
BTW, when will 10.1 official be available for us cheap bastards? I
thought it was going to be made available at the end of November ...
OK, talking to myself, I just hit aolm and see that the iso's are
starting to be made available
On Sat, Nov 27, 2004 at 04:14:09PM +0100, Miroslav Skoric wrote:
Gentle folks,
I have a dual-boot system (Mdk 9.1 and W2k - both having their own
partitions). I also have a spare FAT partition for downloading etc. At
the moment my email client in Mdk is Mozilla suite 1.6 and for W2k is
On Tue, Nov 23, 2004 at 08:42:35PM +0100, Anders Lind wrote:
Hello again,
another question, is there a software to convert MP3 to wav with...I tried
using XMMS but it seems that the plugin that is supposed to be there for it
is not.
Try mpg123.
Todd
I just noticed that all user directories in /home allow group and other
read access. Shouldn't the default setting for /home/user be -rwx--?
Todd
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Join
On Tue, Nov 23, 2004 at 04:51:43PM -0500, JoeHill wrote:
On Tue, 23 Nov 2004 15:06:00 -0500
Todd Slater disseminated the following:
I just noticed that all user directories in /home allow group and other
read access. Shouldn't the default setting for /home/user be -rwx--?
Ya, I
On Mon, Nov 22, 2004 at 11:17:32PM -0500, Bill Mudry wrote:
Could someone help me find out why I cannot get some virtual hosts going on
Apache.
Bill,
How about letting us know what happens when you try to access a virtual
host (in the browser)? Any errors in /var/log/httpd/access_log or
On Tue, Nov 16, 2004 at 12:39:19PM -0500, Jaime Magiera wrote:
Not if it's related to permission conflicts on the server, such as
those imposed by msec. Hence, in the subject Apache or Mandrake.
I think permissions on /home/user/public_html should be 711. I wouldn't
change permissions on
On Tue, Nov 16, 2004 at 09:26:23PM -0800, Hemal Detroja wrote:
Posted by Raj on Wednesday 17/Nov/2004, @03:57
Folks,
I am newbie. I am able to use Kmail to access HOTMAIL directly
without any other software!
For Incoming emails:
Select : POP3
Host : pop2hot.com
{ Feed your
On Mon, Nov 15, 2004 at 09:46:29PM +1100, Stephen Kühn wrote:
Ok - y'all heard me rave on and on about XFce4 time and time again, but
now, well, I'm blown. It's gotten to 4.2 release candidate 1 - and of
course, I had to download it and install it up over the top of what I
already had (er,
I recently bought an ssl certificate for a domain and everything is cool
with browsing the site with https://. Now I'm reading up on Courier IMAP
and using SSL with it--can I use the same certificate for web and IMAP,
or do I have to buy another one?
Todd
--
Name that tune #14: There's a room
On Fri, Nov 12, 2004 at 09:12:35AM -0500, JoeHill wrote:
Best of luck in your future efforts with Mandrake, remember we're always here
to
help (though, running 9.2 still, I've been about as useful as tits on a bull
around here of late...).
I know what you mean, I'm still on 9.1 cause I don't
On Tue, Nov 02, 2004 at 12:20:09PM -0800, Sevatio wrote:
Is it possible to play games at MSN Gaming Zone with Linux? I'm tired
of a friend of mine's W2k pc that keeps getting infected despite Norton
Antivirus. So I'm going to try and switch him over to Linux but he
likes playing in MSN's
On Sun, Oct 31, 2004 at 09:40:00AM +0100, Rodolfo Medina wrote:
Hi.
Does it exist a linux command (or a sequence of commands)
that looks into a file
and delete one line if there are two equal?
uniq is the closest thing I know, but it requires lines to be sorted.
Todd
--
Name that tune
On Tue, Oct 26, 2004 at 11:16:40PM +0800, frankieh wrote:
Todd Slater wrote:
I am hosting a few sites for friends that need cgi access. I read
something about cgi scripts shouldn't be in the web document root for
security purposes--people being able to read them as text. I turned on
cgi
I am hosting a few sites for friends that need cgi access. I read
something about cgi scripts shouldn't be in the web document root for
security purposes--people being able to read them as text. I turned on
cgi by adding the ExecCGI in Directory /home/*/public_html which if I
understand is not
On Wed, Oct 20, 2004 at 09:29:45PM -0400, Adolfo Bello wrote:
Hi all:
Now that Evolution has dropped the Summary, I am going to need a RSS
reader.
I am currently using liferea but I would like to try some others before
making a decision. Any suggestion?
This is one area that I prefer
On Thu, Oct 14, 2004 at 10:41:20AM -0500, Eric Scott wrote:
Heya. I have a server at work running Mandrake 9.2. I'm administering
it remotely through webmin/vnc/ssh and all that fun stuff. Here's the
problem:
I want to set up my /var/www/html directory with limited FTP access. I
can't
On Wed, Oct 13, 2004 at 06:19:23PM +0800, frankieh wrote:
Bryan Phinney wrote:
Don't know if anyone else here is running Apache with web logs, or 'blogs'
and has had trouble with referrer spam but I thought I would mention my
latest experience.
snip
If anyone else is having this problem and
On Wed, Oct 13, 2004 at 11:36:26AM -0400, Bryan Phinney wrote:
On Wednesday 13 October 2004 08:36, Todd Slater wrote:
I have issues with comment spam but not referrer spam, but if I
understand Bryan's strategy it will not block comment spammers, right?
WordPress has some nice comment spam
On Fri, Oct 08, 2004 at 08:30:24PM -0400, g2 wrote:
Hi folks,
I am in a situation where I would like to move all the saved messages I have
in KDE mail into a program under windows.
I think I might be using the mozilla thunderbird.
I do have a fat32 partition that I can see from both the
On Mon, Oct 04, 2004 at 10:05:49PM +0800, Julius Suarez wrote:
On Mon, 4 Oct 2004 21:51:01 +0800, Julius Suarez
[EMAIL PROTECTED] wrote:
Just thinking out loud here - how abount linking the bookmarks.html in
Linux partition file to the bookmarks.html in Windows partition.
Tested
On Sun, Oct 03, 2004 at 02:48:26PM -0500, Chris wrote:
I installed Afterstep 2.0 yesterday, I like the looks, but it will take some
figuring out after all these years of using KDE. Question I have is adding
AS to my login manager. I've added 08AfterStep to my /etc/X11/wmsession.d
file as
On Sun, Oct 03, 2004 at 05:41:06PM -0500, Chris wrote:
On Sunday 03 October 2004 05:28 pm, Todd Slater wrote:
So, can someone lead me down the correct path? I'm sure its easy but I
just can't seem to locate the problem.
I believe the NAME you gave in wmsession.d is case-sensitive, so
On Fri, Oct 01, 2004 at 07:31:20AM -0400, Lanman wrote:
LX,
whack
Lyvim is one of the few who maintains a relatively even composure
compared to some of us and constantly offers help, suggestions and
tactful nudges as to list etiquette instead of attacking newbies or
welcoming them with
On Wed, Sep 29, 2004 at 08:39:52PM +1000, Stephen Kühn wrote:
On Wed, 2004-09-29 at 20:27, Thereidos wrote:
W li?cie z ?ro, 29-09-2004, godz. 09:07, Stephen Kühn pisze:
... gDesklets stuff ...
Don't bother.
Why?
Because it's CRAP software and doesn't work easily out of the box
On Tue, Sep 28, 2004 at 09:38:41PM -0400, JoeHill wrote:
On Tue, 28 Sep 2004 21:31:48 +0200
H.J.Bathoorn disseminated the following:
I second that. Mileage varies on other players, mplayer always just works on
all sorts of distro's and plays almost anything you throw at it.
I'd be
Anyone on the list use a Mac with OSX? I'm about to get one at work and
was wondering how easy it is to use the FreeBSD under the hood--such as
for installing apps I'm accustomed to like vcdimager, instiki, and
others.
Todd
--
Name that tune #7: A lot of people don't have much food on their
On Thu, 23 Sep 2004 20:16:51 +, PM [EMAIL PROTECTED] wrote:
On Thu, 2004-09-23 at 12:27 -0400, Todd Slater wrote:
You should just be able to point to all of your directories from the
command line, such as
normalize -m /path/to/dir1/*.wav /path/to/dir2/*.wav
snip
many thanks
On Thu, Sep 23, 2004 at 06:44:01PM +, PM wrote:
I generally use normalize to standardise the volumes of mp3 files, but
this will only work with one directory at a time.
I want to transfer a collection of mp3 files in many directories to a
DVD to play via DVD player.
Has anybody any
On Mon, Sep 20, 2004 at 02:34:45PM -0500, Eric Scott wrote:
On Mon, 2004-09-20 at 19:04, Carroll Grigsby wrote:
For all of us anti-MS folks, here's Bob Cringely's latest:
http://www.pbs.org/cringely/pulpit/pulpit20040916.html
-- cmg
Lol, ranks right up there with
My daughter got hold of an audio cd and scratched it all up. Thinking it
would be for the trash, I nevertheless gave it a shot and cleaned it and
put it in my stereo's cd player; to my surprise, nary a skip!
I thought I'd best back it up so I tried ripping it with cdparanoia to
encode to flac,
On Sun, Sep 12, 2004 at 11:22:38PM +0200, Thereidos wrote:
W li?cie z nie, 12-09-2004, godz. 20:16, Todd Slater pisze:
How about your own personal learning wiki? Instiki is really good for
this, I've set one up here: http://wiki.webonaire.com/cheatsheetki/
http://www.instiki.org
On Sun, Sep 12, 2004 at 04:39:33PM +0100, Paul Smith wrote:
Dear All
I am looking for a program to collect and organize some useful tips that
I can get from mailing lists. I am thinking about a word processor or a
database. Which one is more appropriate? Any ideas?
Thanks in advance,
On Sun, Sep 12, 2004 at 08:47:21AM -0400, Bill Winegarden wrote:
Hi,
I am trying to setup my Fuji Finepix 2400 in LM10. I did not have any problem
doing this in earlier versions and in 9.1 there was an automatic setup.
However in 10 it seems that I have to set it up manually again.
I have
On Thu, Sep 09, 2004 at 07:47:17AM -0700, julie wrote:
Has anyone tried using the WYSIWYG html editor Nvu? There is now an rpm for
Mandrake 10 available and, before installing the program I was wondering if
anyone had experienced any glitches.
Julie
I've use it on Windows; it's basically
On Tue, Sep 07, 2004 at 08:31:39PM -0400, Terence Golightly wrote:
List,
Below is a cmdln run of gmplayer. Please note the four or five last
lines and well a few in between:
[EMAIL PROTECTED] terryg]$ gmplayer
snip
VO: [dxr3] Error opening /dev/em8300-0 for writing, trying /dev/em8300
Since Eric and Joe seem to be asleep ;)
http://mandrake.vmlinuz.ca/bin/view/Main/MandrakeMailingListEtiquette
On Thu, Sep 02, 2004 at 11:01:02PM +1200, warren wrote:
Hi all,
I using Mandrake 10.0 and have just rebooted my computer to discover
that i have no mandrake control center / open
On Thu, Sep 02, 2004 at 11:19:30AM -0500, flesh.99 wrote:
On Thu, 2 Sep 2004 10:13:27 -0400, Todd Slater [EMAIL PROTECTED] wrote:
Since Eric and Joe seem to be asleep ;)
http://mandrake.vmlinuz.ca/bin/view/Main/MandrakeMailingListEtiquette
On Thu, Sep 02, 2004 at 11:01:02PM +1200
On Thu, Sep 02, 2004 at 09:38:05AM +0200, Harald T ZIPKO wrote:
Manually it's possible to copy the text from the file via
~r /name/of/the/file.txt
But:
How do I force 'mail' in a shell script to send a file as attachment to
[EMAIL PROTECTED]
(at the end of the week I would like to know
On Mon, Aug 30, 2004 at 10:21:11PM -0700, Rob Blomquist wrote:
On Monday 30 August 2004 3:56 pm, Brian Parish wrote:
Has anyone tried one of these hard drive players with Mandrake? The ogg
support and capacity makes it look good, but I wouldn't want to have to
boot doze to load it!
One
On Tue, Aug 31, 2004 at 07:24:34PM -0400, JoeHill wrote:
On Tue, 31 Aug 2004 18:32:26 -0400
Lyvim Xaphir disseminated the following:
No not specifically, if you don't have any money to spend on software,
you use free software.
In a way smarter:it's smarter than downloading illegal
On Mon, Aug 30, 2004 at 10:14:13PM +0200, Alan wrote:
Good day all
I asked a while ago about setting up a squid proxy server to do
authentication and somebody gave me a couple of URL's to look at and
being an idiot I did not save them.
I tried looking in the archives but the dates only go
Is there a way to have dvd's autoplay without using totem? I tried to
get mplayer to be the default by going to config kde
somethingorother file associations, mp* and moved mplayer up above
totem. When I insert a dvd now it doesn't autoplay.
Yes, this is kde on mdk10.0, for a friend.
Thanks,
On Thu, Aug 26, 2004 at 07:50:24AM -0400, Lanman wrote:
Does anyone know of a way to resize a batch of icons all at once? I've
been looking at Imagemagick, but can't get the command-line to work
properly. There seems to be some options or info missing from the
Man-Page for it, and I can't
On Thu, Aug 26, 2004 at 10:37:43AM -0400, Lanman wrote:
Hoyt Bailey wrote:
On Thursday 26 August 2004 07:38, Lanman wrote:
Hoyt Bailey wrote:
On Thursday 26 August 2004 06:50, Lanman wrote:
Does anyone know of a way to resize a batch of icons all at once?
I've been looking at
On Wed, Aug 25, 2004 at 01:04:49PM +0100, Paul Smith wrote:
Dear All
I have placed a script in /.kde/Autostart to be run at start-up for a
specific user. Is there some way of having the same script to be run at
the start-up for that specific user, independently of the chosen desktop
On Tue, Aug 24, 2004 at 11:13:05PM +0800, frankieh wrote:
Kaj Haulrich wrote:
Dear list...
...
Suddenly, when she tries to send an e-mail (from within Mozilla, of
course, I'm not THAT stupid), up pops a message from our ISP saying
that the box is compromized, accordingly the smtp-server
On Tue, Aug 24, 2004 at 06:39:59PM -0400, SiNiStEr Nation wrote:
I've installed Mandrake about week to two weeks ago and slowly learning
the system. My question is I have several files that I have downloaded,
and was wondering what's the process of burning these file to a cd? I
know I could
On Sat, Aug 21, 2004 at 08:58:07AM -0500, Steve Jeppesen wrote:
On Sat, 21 Aug 2004 00:38:24 -0400
Todd Slater [EMAIL PROTECTED] wrote:
http://clevername.homeip.net/2004_08_21-00_33_35.png
Todd,
I get the message clevername.homeip.net could not be found
Working on the server
On Fri, Aug 20, 2004 at 12:05:09PM -0700, Ayoub890 wrote:
Hi,
Can LM10 be booted from a USB or Firewire HD?
Thanx,
Ayoub
As long as your BIOS supports it.
Todd
--
rm -rf Whitehouse/Bush
Want to buy your Pack or Services from
On Thu, Aug 19, 2004 at 11:13:51PM -0400, JoeHill wrote:
Gettin' bored with my current selection of Pekwm themes, wondering if some
people can post some screens of their WM for me to get some ideas, or otherwise
steal/hack at.
Cheers!
(Please no candy-assed KDE or
On Thu, Aug 19, 2004 at 11:29:22AM +0100, Paul Smith wrote:
Dear All
Does somebody know about a program for giving us the number of
occurrences of each word in a text file?
Thanks in advance,
Paul
I don't know of a program that does it--perhaps it's built in to a word
processor? You
On Thu, Aug 19, 2004 at 07:37:25AM -0600, Russ Kepler wrote:
On Thursday 19 August 2004 06:45 am, Todd Slater wrote:
2. Get unique words to count from masterwordlist.
uniq masterwordlist uniqwords
3. Count the number of times a word in uniqwords appears in
masterwordlist
On Thu, Aug 19, 2004 at 08:30:25AM -0500, Mikkel L. Ellertson wrote:
Paul Smith wrote:
Dear All
Does somebody know about a program for giving us the number of
occurrences of each word in a text file?
Thanks in advance,
Paul
I am not at my Linux box at the moment, but if I
On Tue, Aug 17, 2004 at 05:57:51PM -0400, Paul Kaplan wrote:
Can anyone provide a link to an up to date archive of the newbie mailing list.
TIA
Paul
I have the best luck with
http://marc.theaimsgroup.com/?l=mandrake-newbier=1w=2
Thanks for asking.
Todd
On Thu, Aug 12, 2004 at 11:19:09AM -0400, Clint Harshaw wrote:
Hi all. I don't seem to have the commands w, who, and users available on
my system. Or at least, they don't seem to be giving the anticipated
output.
Did I misconfigure something during installation?
[EMAIL PROTECTED]
On Wed, Aug 11, 2004 at 03:47:26PM +0100, Paul Smith wrote:
Mikkel L. Ellertson wrote:
Is there some program to provide auto-completion for the command line
(bash)?
What exactly are you looking for?
Thanks, Mikkel. I looking for a way of getting auto-completion according
to history.
.
Todd
On Tue, 2004-08-10 at 07:11, Todd Slater wrote:
My compadre has a Compaq Presario 900 with DVD and WinDVD is all mucked
up--it keeps giving a create overlay failed error. I googled and tried
a bunch of things to fix it, to no avail. I could get DVD's to play
using PowerDVD, but it's
My compadre has a Compaq Presario 900 with DVD and WinDVD is all mucked
up--it keeps giving a create overlay failed error. I googled and tried
a bunch of things to fix it, to no avail. I could get DVD's to play
using PowerDVD, but it's just a trial and costs $50.
I suggested installing Mandrake
On Sun, Aug 08, 2004 at 08:58:15AM -0400, Ankit Malik wrote:
How to switch to text mode
/sbin/init 3 isnt working for me
You change the default init level in /etc/inittab.
Todd
--
Name that tune #1: Is there gas in the car? Yes there's gas in the car!
I think the people down the hall know
On Sat, Aug 07, 2004 at 01:58:40AM +, Lee Wiggers wrote:
On Fri, 6 Aug 2004 08:42:32 -0400
Todd Slater [EMAIL PROTECTED] wrote:
On Fri, Aug 06, 2004 at 07:25:01AM +, Lee Wiggers wrote:
Hi all
Anyone know how to strip a serial number from an .ogg?
I have two gb that I
On Sat, Aug 07, 2004 at 07:27:59PM -0400, Marv Boyes wrote:
Hello, all. Can anyone recommend an image viewer in the same vein as
gThumb or gqview that displays GIMP .xcf files without hassle?
If the GIMP 2 includes a thumbnail browser like Photoshop's, that
doesn't necessarily solve my
On Fri, Aug 06, 2004 at 07:25:01AM +, Lee Wiggers wrote:
Hi all
Anyone know how to strip a serial number from an .ogg?
I have two gb that I just noticed a sn in the tag. No particular
care about it, but it seems intrusive or prohibitive, or something.
Use something to edit the tags,
I'm auctioning some hard drives and I want to wipe them and format them.
I had all kinds of trouble creating boot floppies for some reason--even
though no errors were reported I couldn't boot them. I ended up having
success with making a bootable cd.
So I'm using autoclave to wipe the hard drive;
On Tue, Aug 03, 2004 at 01:47:00PM -0400, g2 wrote:
Clint, Todd,
Thanks for the suggestions.
I will check out the scripting tools you mentioned, however they will probably
be beyond my skill level.
Regarding Mozilla's ability to watch a website, yes I have explored that
feature.
BTW, my
On Tue, Aug 03, 2004 at 10:19:28AM +1000, Stephen Kühn wrote:
On Tue, 2004-08-03 at 08:17, [EMAIL PROTECTED] wrote:
I'm getting a lot of bad signature messages when I try to
install packages from the CD's. Should I be worried? Or is this
simply a matter of bad packaging?
Brenda Bell
On Sat, Jul 31, 2004 at 10:12:03AM -0400, Clint Harshaw wrote:
Hi all:
I'm new to Mandrake 10 Official, and have config'd my urpmi sources using
those at the easyurpmi site. I've run urpmi --auto-select and updated my
system. When I run who or users at the terminal, however, I don't get
On Thu, Jul 29, 2004 at 11:41:52PM -0400, g2 wrote:
folks,
does anyone know of a program, hopefully, appropriate for a linux/mandrake
newbie, that will send an email with the text content of a website I specify.
I know there are various web based services that do this, however none that I
On Wed, Jul 28, 2004 at 07:26:06AM -0500, Hoyt Bailey wrote:
No you didn't you just don't read things like I do.
PCI = Politically Incorrect. Maybe it should be /PC or PC/Not or maybe
PIC. Whatever!
How about: ! PC
Want to buy your Pack
On Tue, Jul 27, 2004 at 05:55:32AM -0400, Lanman wrote:
Joe; Not to worry! Your new domain is working, and so is your
philosophy! Grin! But you need to update your contacts page,...
http://www.freeyourmachine.org/contact.php
Just thought I'd let you know. And while I'm on the subject,
On Tue, Jul 27, 2004 at 09:36:56AM +0100, Graham Watkins wrote:
http://linuxorbit.com/modules.php?op=modloadname=Sectionsfile=indexreq=viewarticleartid=222page=1
If y'all use Firefox and aren't using the TinyURL extension, get it now!
This great extension uses the tinyurl site to generate
On Tue, Jul 27, 2004 at 02:58:39PM -0400, Lanman wrote:
Does anyone know where I can find a GPL'ed installer application for the
Linux Operating System? I am working on a project, and I need something
like Anaconda. I can't use a LiveCD installer for this, since the
finished project will
On Mon, Jul 26, 2004 at 07:11:14AM +0200, Marc Hultquist wrote:
/var/www/html
In-correct. By default apache2 installs its htdocs/ in the folder where
everything else is installed, I.E if when installing apache you do as follows
./configure --prefix=/apache/ your apache will be installed
On Sun, Jul 25, 2004 at 10:50:50AM -0300, Angus Auld wrote:
Greetings all,
I am trying to build a rpm package from tar using checkinstall,
and not succeeding.
The packages I want to build are giFT-FastTrack-0.8.7.tar.gz,
gift-openft-0.2.1.3.tar.gz, and gift-gnutella-0.0.9.2.tar.gz.
I am
On Wed, Jul 21, 2004 at 11:08:47PM +0100, Margot wrote:
Stephen Kuhn wrote:
On Thu, 2004-07-22 at 06:50, Margot wrote:
Errr...I'm afraid I have no idea where to find the startup script!
And what is chbg?
Thanks for your help so far.
Margot
/etc/X11/xfce4/xinitrc
Thanks
On Thu, Jul 22, 2004 at 12:34:13AM +0200, Marco Verheul wrote:
Hi all,
I want to install a platform independent font viewer (Opcion). On their
website ( http://opcion.sourceforge.net/help.htm ) they say:
Execute Opcion Font Viewer
... For Linux users use the command java -jar
On Sat, Jul 17, 2004 at 08:14:58AM +0700, Budhi Astiyadi wrote:
You should buy mobo with NForce2 Ultra 400 Chipset. If You sound maniac,
choose that come with MCP-T Southbridge, the price is little higher. If You
have more money, buy two identicel memory that can run dual channel, or
Dual
On Sun, Jul 18, 2004 at 06:10:20PM +0100, SME Server Admin wrote:
Hi Folks
Whats the setup to get Grip to rip CDs to MP3?
At the moment I've got the encoding setup to oggenc because all the others
wont work :(
Others tried are: gogo, mp3encode, xingmp3enc, l3enc, lame, bladeenc
For
Seems like I only post ot questions lately :(
I'm thinking about building a new computer. My needs are pretty typical
home user stuff. I want to network it (haven't decided on wired or
wireless yet), be able to watch TV on it, and possibly make dvd's from
recorded TV.
Basically I've decided I
On Fri, Jul 16, 2004 at 05:49:35PM -0500, hackhound wrote:
I have configured Klipper with the following line to launch Firefox
when a link in a text file is highlighted, and it works if Firefox is
not open. The problem is when I try it while Firefox is already open.
It's supposed to open in
Well, sorta OT--I'm looking to get a keyboard and mouse for my kids that
are better (ergonomically) than adult-sized keyboards and mice. The
manufacturer lists Windows or Mac as requirements, but I'm assuming that
means to run the typing software that comes with it, and perhaps to
program the
On Fri, Jul 09, 2004 at 02:58:51PM -0500, Mikkel L. Ellertson wrote:
Todd Slater wrote:
Well, sorta OT--I'm looking to get a keyboard and mouse for my kids
that are better (ergonomically) than adult-sized keyboards and mice.
The manufacturer lists Windows or Mac as requirements, but I'm
1 - 100 of 842 matches
Mail list logo
