Re: How to configure Maven for an overloaded intranet repository?
There are two approaches for your issue. First of all, you can try to use caches, so you don't need to download dependencies over and over again. There are also settings which might help, see the system properties in WAGON-545 [1]. E.g. retries and timeouts. But. To me it sounds from your description that your internal repo mirror needs some HA / scaling set up. Refer to the guides from nexus [2] and artifactory [3] for more information. Have nodes near your locations and configure the LBs to prefer near nodes. [1] - https://issues.apache.org/jira/browse/WAGON-545 [2] - https://help.sonatype.com/repomanager3/planning-your-implementation/resiliency-and-high-availability/high-availability-clustering-%28legacy%29/configuring-nodes [3] - https://www.jfrog.com/confluence/display/JFROG/High+Availability On Thu, 29 Sept 2022, 20:23 David Karr, wrote: > I work in a very large enterprise that uses a centralized intranet maven > repository to get artifacts from. It often has load issues that result in > builds failing with "failed to respond". The team that maintains it is > working towards eventual mitigations for that, but it will be quite a while > before that actually happens. > > What knobs or dials can I get to to make the connection to the remote > repository more resilient? The error "failed to respond" sounds like a > connection timeout, not a read timeout, but I can't tell. What property > values can I override that would help here? >
How to configure Maven for an overloaded intranet repository?
I work in a very large enterprise that uses a centralized intranet maven repository to get artifacts from. It often has load issues that result in builds failing with "failed to respond". The team that maintains it is working towards eventual mitigations for that, but it will be quite a while before that actually happens. What knobs or dials can I get to to make the connection to the remote repository more resilient? The error "failed to respond" sounds like a connection timeout, not a read timeout, but I can't tell. What property values can I override that would help here?
how to configure maven-shade-plugin to execute using specific java version?
Hi,
My default JAVA_HOME points to java 1.6 and I am trying use
maven-shade-plugin version 3.2.1 which requires java 1.7+
So I looking for a way to configure my maven-shade-plugin to execute using
required java version and not my default JAVA_HOME version.
E.g. I had similar issue with maven-surefire-plugin and I was able to solve
it by specifying under its but unfortunately this
doesn't works for maven-shade-plugin:
${JAVA_8_HOME}/bin/java
Thanks,
Sachin
Re: Need help.. How to configure POM for multi-module checkout
Yeah, that's a good idea...
On 2019/03/24 14:38:25, Kyle Marek wrote:
> You can arbitrarily switch to other tags and branches with submodules.
> It is just a simple `git checkout X` from the submodule's directory.
>
> -Kyle
>
> On 3/24/19 9:51 AM, ga...@oedata.com wrote:
> > Hi Nick,
> >
> > Thank you for that suggestion. That was also suggested on stackoverflow by
> > Karl. That method is better suited for static-ish configurations. I need
> > a BOM type system where I can dynamically switch between tags and branches
> > for different modules, much like clear case. I'll be moving to a different
> > structure and tool chain in 6 months.
> >
> > cheer
> >
> > On 2019/03/24 01:45:50, Kyle Marek wrote:
> >> Not sure that it will help with version number matches, but you could
> >> also use Git submodules to bring multiple repositories together in a
> >> single tree.
> >>
> >> See: https://git-scm.com/book/en/v2/Git-Tools-Submodules
> >>
> >> On 3/23/19 9:26 PM, ga...@oedata.com wrote:
> >>> Hi Karl,
> >>>
> >>> Thank you for replying on mail server. and thanks for sending me the
> >>> links to you project poms. They look awesome.
> >>>
> >>> The is a difference between your projects and my situation. Your projects
> >>> all the modules reside in the same repository. In my case, they reside in
> >>> different repositories.
> >>>
> >>> I elected to use the scm plugin because it allows me to select branches
> >>> and tags, based on the project and development requirements. I didn't
> >>> suspect reactor would check for poms before executing the life cycle.
> >>>
> >>> I'm sure this has been solved by someone in the past. I just don't know
> >>> how to solve it using maven. I can solve it with a bunch of execute
> >>> blocks, but that is very ugly. I'm going to look at the release plugin
> >>> and a few others
> >>>
> >>> It's likely I'm using the wrong plugin or I'm missing a plugin.
> >>>
> >>> BTW, I like your iterator plugin
> >>>
> >>> cheers
> >>> gary
> >>>
> >>>
> >>>
> >>>
> >>> On 2019/03/23 23:56:48, Karl Heinz Marbaise wrote:
> Hi,
>
> I will give you the same answer as on StackOverflow.
>
> The way you are going sounds wrong...
>
> As I already suggested is the way to go creating a multi module build
> which comprises of several modules which is located within a single Git
> repository. this can be build by using a single command.
>
>
> mvn clean package
>
> from the root location..
>
> https://github.com/khmarbaise/javaee
> https://github.com/khmarbaise/supose
>
> Kind regards
> Karl Heinz Marbaise
>
> On 24.03.19 00:35, Gary M wrote:
> > Hi,
> >
> > I need some help with scm checking out multiple modules and building
> > them.
> > I have several projects I'm consolidating into a single jar. Reactor
> > checks for module poms before generate-sources executes.
> >
> > How do I fix this issue ?
> >
> > thanks..
> > g
> >
> > POM sample to give you an idea of what I've done.
> >
> >
> >org.apache.maven.plugins
> >maven-scm-plugin
> >1.9.4
> >
> >
> >mod-1
> >generate-sources
> >
> > ${mod-1.url}
> > ${mod-1.versionType}
> > ${mod-1.version}
> > ${mod-1.directory}
> >
> >
> > checkout
> >
> >
> >
> >mod-2
> >generate-sources
> >
> > ${mod-2.url}
> > ${mod-2.versionType}
> > ${mod-2.version}
> > ${mod-2.directory}
> >
> >
> > checkout
> >
> >
> >
> >
> > .
> >
> >
> >
> -
> To unsubscribe, e-mail: users-unsubscr...@maven.apache.org
> For additional commands, e-mail: users-h...@maven.apache.org
>
>
> >>> -
> >>> To unsubscribe, e-mail: users-unsubscr...@maven.apache.org
> >>> For additional commands, e-mail: users-h...@maven.apache.org
> >>
> > -
> > To unsubscribe, e-mail: users-unsubscr...@maven.apache.org
> > For additional commands, e-mail: users-h...@maven.apache.org
>
>
-
To unsubscribe, e-mail: users-unsubscr...@maven.apache.org
For additional commands, e-mail: users-h...@maven.apache.org
Re: Need help.. How to configure POM for multi-module checkout
Hi Karl, Thank you for the suggestion to use maven-shade/maven-assembly-plugin(s). I was planning to use them, but haven't gotten around to them yet. I was hung up on the checkout/build thing. :- Maybe on Tuesday. The libraries are in 7 modules to manage the development cycle, specifically functional and unit testing. The aggregate library.jar will not have test cases other than one per library to ensure each module was included in the library.jar. The BOM file is the way I'm going as per your suggestion. cheers, gary On 2019/03/24 21:45:37, Karl Heinz Marbaise wrote: > Hi Gary, > > On 24.03.19 17:55, ga...@oedata.com wrote: > > Hi Nick, > > > > Thanks for the questions, I'll try to explain. > > > > The parent pom aggregates a library (jar) from different and sometimes > > interdependent modules. The parent pom checks out the module sources with > > the poms and compiles them into a single jar. > > > Maybe I misunderstand a thing here. But it sounds as if you have a > resulting library which results in a single jar? Let us ignore at the > first place the checkout things etc. > > Basicly I would say if your result is a single jar you usually have a > single maven project? > > If your result is a single jar which is combined from different modules > I would reconsider the architecture cause usually it's better having > separated modules like *-api, *-core etc. and may be a supplemental > thing could be a shaded-jar which combines several of them... > > Having seperated modules make testing easier which means you can put > your unit tests into the appropriate module etc. > > Do you use maven-shade/maven-assembly-plugin? > > If you like to produce a BOM file. The usualy way is to make a separate > module which contains simply the dependencyManagement with mentioning > the modules it should contain. > > Kind regards > Karl Heinz Marbaise > > > - > To unsubscribe, e-mail: users-unsubscr...@maven.apache.org > For additional commands, e-mail: users-h...@maven.apache.org > > - To unsubscribe, e-mail: users-unsubscr...@maven.apache.org For additional commands, e-mail: users-h...@maven.apache.org
Re: Need help.. How to configure POM for multi-module checkout
Hi Gary, On 24.03.19 17:55, ga...@oedata.com wrote: Hi Nick, Thanks for the questions, I'll try to explain. The parent pom aggregates a library (jar) from different and sometimes interdependent modules. The parent pom checks out the module sources with the poms and compiles them into a single jar. Maybe I misunderstand a thing here. But it sounds as if you have a resulting library which results in a single jar? Let us ignore at the first place the checkout things etc. Basicly I would say if your result is a single jar you usually have a single maven project? If your result is a single jar which is combined from different modules I would reconsider the architecture cause usually it's better having separated modules like *-api, *-core etc. and may be a supplemental thing could be a shaded-jar which combines several of them... Having seperated modules make testing easier which means you can put your unit tests into the appropriate module etc. Do you use maven-shade/maven-assembly-plugin? If you like to produce a BOM file. The usualy way is to make a separate module which contains simply the dependencyManagement with mentioning the modules it should contain. Kind regards Karl Heinz Marbaise - To unsubscribe, e-mail: users-unsubscr...@maven.apache.org For additional commands, e-mail: users-h...@maven.apache.org
Re: Need help.. How to configure POM for multi-module checkout
Hi Nick,
Thanks for the questions, I'll try to explain.
The parent pom aggregates a library (jar) from different and sometimes
interdependent modules. The parent pom checks out the module sources with the
poms and compiles them into a single jar.
I was using the modules pattern in in the parent pom to make the BOM easier
(less confusing) to manage. I was also using scm plugin for multi-module
checkouts. Independently, multi-module builds and multi-module checkouts work
perfectly.
When I mix the SCM plugin with the multi-module build, reactor first checks if
the module's poms exist prior to checkout. I was wondering whether there was a
way to defer the pom check until after checkout. After reviewing reactor code,
I found that is not possible without changes.
It looks like the release plugin interacts with reactor in a complimentary
process.
On 2019/03/24 11:31:28, Nikki Novak wrote:
> Gary,
>
> Having modules residing in other repositories is not a problem...
>
> ...but why do they not have a pom.xml ?
>
> ...Is the POM on a different branch ?
> ...Are the modules using ANT or gradle instead ?
> ...Are you auto-generating POMs ?
>
> Like, I'm really scratching my head trying to figure out what is going on
> here ?
>
> If the only thing you need to do is checkout, then you could add a git
> submodule and add the folder to the maven aggregator ?
> The git submodule always points to a specific commit (until you update the
> reference).
>
> Would that be a viable option for your purpose(s) ?
>
> Nick
>
>
> From: garym@
> Sent: Sunday, March 24, 2019 1:26 AM
> To: users@maven.apache.org
> Subject: Re: Need help.. How to configure POM for multi-module checkout
>
> Hi Karl,
>
> Thank you for replying on mail server. and thanks for sending me the links to
> you project poms. They look awesome.
>
> The is a difference between your projects and my situation. Your projects all
> the modules reside in the same repository. In my case, they reside in
> different repositories.
>
> I elected to use the scm plugin because it allows me to select branches and
> tags, based on the project and development requirements. I didn't suspect
> reactor would check for poms before executing the life cycle.
>
> I'm sure this has been solved by someone in the past. I just don't know how
> to solve it using maven. I can solve it with a bunch of execute blocks, but
> that is very ugly. I'm going to look at the release plugin and a few others
>
> It's likely I'm using the wrong plugin or I'm missing a plugin.
>
> BTW, I like your iterator plugin
>
> cheers
> gary
>
>
>
>
> On 2019/03/23 23:56:48, Karl Heinz Marbaise wrote:
> > Hi,
> >
> > I will give you the same answer as on StackOverflow.
> >
> > The way you are going sounds wrong...
> >
> > As I already suggested is the way to go creating a multi module build
> > which comprises of several modules which is located within a single Git
> > repository. this can be build by using a single command.
> >
> >
> > mvn clean package
> >
> > from the root location..
> >
> > https://github.com/khmarbaise/javaee
> > https://github.com/khmarbaise/supose
> >
> > Kind regards
> > Karl Heinz Marbaise
> >
> > On 24.03.19 00:35, Gary M wrote:
> > > Hi,
> > >
> > > I need some help with scm checking out multiple modules and building them.
> > > I have several projects I'm consolidating into a single jar. Reactor
> > > checks for module poms before generate-sources executes.
> > >
> > > How do I fix this issue ?
> > >
> > > thanks..
> > > g
> > >
> > > POM sample to give you an idea of what I've done.
> > >
> > >
> > >org.apache.maven.plugins
> > >maven-scm-plugin
> > >1.9.4
> > >
> > >
> > >mod-1
> > >generate-sources
> > >
> > > ${mod-1.url}
> > > ${mod-1.versionType}
> > > ${mod-1.version}
> > > ${mod-1.directory}
> > >
> > >
> > > checkout
> > >
> > >
> > >
> > >mod-2
> > >generate-sources
> > >
> > > ${mod-2.url}
> > > ${mod-2.versionType}
> > >
Re: Need help.. How to configure POM for multi-module checkout
You can arbitrarily switch to other tags and branches with submodules.
It is just a simple `git checkout X` from the submodule's directory.
-Kyle
On 3/24/19 9:51 AM, ga...@oedata.com wrote:
> Hi Nick,
>
> Thank you for that suggestion. That was also suggested on stackoverflow by
> Karl. That method is better suited for static-ish configurations. I need a
> BOM type system where I can dynamically switch between tags and branches for
> different modules, much like clear case. I'll be moving to a different
> structure and tool chain in 6 months.
>
> cheer
>
> On 2019/03/24 01:45:50, Kyle Marek wrote:
>> Not sure that it will help with version number matches, but you could
>> also use Git submodules to bring multiple repositories together in a
>> single tree.
>>
>> See: https://git-scm.com/book/en/v2/Git-Tools-Submodules
>>
>> On 3/23/19 9:26 PM, ga...@oedata.com wrote:
>>> Hi Karl,
>>>
>>> Thank you for replying on mail server. and thanks for sending me the links
>>> to you project poms. They look awesome.
>>>
>>> The is a difference between your projects and my situation. Your projects
>>> all the modules reside in the same repository. In my case, they reside in
>>> different repositories.
>>>
>>> I elected to use the scm plugin because it allows me to select branches and
>>> tags, based on the project and development requirements. I didn't suspect
>>> reactor would check for poms before executing the life cycle.
>>>
>>> I'm sure this has been solved by someone in the past. I just don't know
>>> how to solve it using maven. I can solve it with a bunch of execute blocks,
>>> but that is very ugly. I'm going to look at the release plugin and a few
>>> others
>>>
>>> It's likely I'm using the wrong plugin or I'm missing a plugin.
>>>
>>> BTW, I like your iterator plugin
>>>
>>> cheers
>>> gary
>>>
>>>
>>>
>>>
>>> On 2019/03/23 23:56:48, Karl Heinz Marbaise wrote:
Hi,
I will give you the same answer as on StackOverflow.
The way you are going sounds wrong...
As I already suggested is the way to go creating a multi module build
which comprises of several modules which is located within a single Git
repository. this can be build by using a single command.
mvn clean package
from the root location..
https://github.com/khmarbaise/javaee
https://github.com/khmarbaise/supose
Kind regards
Karl Heinz Marbaise
On 24.03.19 00:35, Gary M wrote:
> Hi,
>
> I need some help with scm checking out multiple modules and building them.
> I have several projects I'm consolidating into a single jar. Reactor
> checks for module poms before generate-sources executes.
>
> How do I fix this issue ?
>
> thanks..
> g
>
> POM sample to give you an idea of what I've done.
>
>
>org.apache.maven.plugins
>maven-scm-plugin
>1.9.4
>
>
>mod-1
>generate-sources
>
> ${mod-1.url}
> ${mod-1.versionType}
> ${mod-1.version}
> ${mod-1.directory}
>
>
> checkout
>
>
>
>mod-2
>generate-sources
>
> ${mod-2.url}
> ${mod-2.versionType}
> ${mod-2.version}
> ${mod-2.directory}
>
>
> checkout
>
>
>
>
> .
>
>
>
-
To unsubscribe, e-mail: users-unsubscr...@maven.apache.org
For additional commands, e-mail: users-h...@maven.apache.org
>>> -
>>> To unsubscribe, e-mail: users-unsubscr...@maven.apache.org
>>> For additional commands, e-mail: users-h...@maven.apache.org
>>
> -
> To unsubscribe, e-mail: users-unsubscr...@maven.apache.org
> For additional commands, e-mail: users-h...@maven.apache.org
signature.asc
Description: OpenPGP digital signature
Re: Need help.. How to configure POM for multi-module checkout
Hi Nick,
Thank you for that suggestion. That was also suggested on stackoverflow by
Karl. That method is better suited for static-ish configurations. I need a
BOM type system where I can dynamically switch between tags and branches for
different modules, much like clear case. I'll be moving to a different
structure and tool chain in 6 months.
cheer
On 2019/03/24 01:45:50, Kyle Marek wrote:
> Not sure that it will help with version number matches, but you could
> also use Git submodules to bring multiple repositories together in a
> single tree.
>
> See: https://git-scm.com/book/en/v2/Git-Tools-Submodules
>
> On 3/23/19 9:26 PM, ga...@oedata.com wrote:
> > Hi Karl,
> >
> > Thank you for replying on mail server. and thanks for sending me the links
> > to you project poms. They look awesome.
> >
> > The is a difference between your projects and my situation. Your projects
> > all the modules reside in the same repository. In my case, they reside in
> > different repositories.
> >
> > I elected to use the scm plugin because it allows me to select branches and
> > tags, based on the project and development requirements. I didn't suspect
> > reactor would check for poms before executing the life cycle.
> >
> > I'm sure this has been solved by someone in the past. I just don't know
> > how to solve it using maven. I can solve it with a bunch of execute blocks,
> > but that is very ugly. I'm going to look at the release plugin and a few
> > others
> >
> > It's likely I'm using the wrong plugin or I'm missing a plugin.
> >
> > BTW, I like your iterator plugin
> >
> > cheers
> > gary
> >
> >
> >
> >
> > On 2019/03/23 23:56:48, Karl Heinz Marbaise wrote:
> >> Hi,
> >>
> >> I will give you the same answer as on StackOverflow.
> >>
> >> The way you are going sounds wrong...
> >>
> >> As I already suggested is the way to go creating a multi module build
> >> which comprises of several modules which is located within a single Git
> >> repository. this can be build by using a single command.
> >>
> >>
> >> mvn clean package
> >>
> >> from the root location..
> >>
> >> https://github.com/khmarbaise/javaee
> >> https://github.com/khmarbaise/supose
> >>
> >> Kind regards
> >> Karl Heinz Marbaise
> >>
> >> On 24.03.19 00:35, Gary M wrote:
> >>> Hi,
> >>>
> >>> I need some help with scm checking out multiple modules and building them.
> >>> I have several projects I'm consolidating into a single jar. Reactor
> >>> checks for module poms before generate-sources executes.
> >>>
> >>> How do I fix this issue ?
> >>>
> >>> thanks..
> >>> g
> >>>
> >>> POM sample to give you an idea of what I've done.
> >>>
> >>>
> >>>org.apache.maven.plugins
> >>>maven-scm-plugin
> >>>1.9.4
> >>>
> >>>
> >>>mod-1
> >>>generate-sources
> >>>
> >>> ${mod-1.url}
> >>> ${mod-1.versionType}
> >>> ${mod-1.version}
> >>> ${mod-1.directory}
> >>>
> >>>
> >>> checkout
> >>>
> >>>
> >>>
> >>>mod-2
> >>>generate-sources
> >>>
> >>> ${mod-2.url}
> >>> ${mod-2.versionType}
> >>> ${mod-2.version}
> >>> ${mod-2.directory}
> >>>
> >>>
> >>> checkout
> >>>
> >>>
> >>>
> >>>
> >>> .
> >>>
> >>>
> >>>
> >> -
> >> To unsubscribe, e-mail: users-unsubscr...@maven.apache.org
> >> For additional commands, e-mail: users-h...@maven.apache.org
> >>
> >>
> > -
> > To unsubscribe, e-mail: users-unsubscr...@maven.apache.org
> > For additional commands, e-mail: users-h...@maven.apache.org
>
>
-
To unsubscribe, e-mail: users-unsubscr...@maven.apache.org
For additional commands, e-mail: users-h...@maven.apache.org
Re: Need help.. How to configure POM for multi-module checkout
Gary,
Having modules residing in other repositories is not a problem...
...but why do they not have a pom.xml ?
...Is the POM on a different branch ?
...Are the modules using ANT or gradle instead ?
...Are you auto-generating POMs ?
Like, I'm really scratching my head trying to figure out what is going on here ?
If the only thing you need to do is checkout, then you could add a git
submodule and add the folder to the maven aggregator ?
The git submodule always points to a specific commit (until you update the
reference).
Would that be a viable option for your purpose(s) ?
Nick
From: garym@
Sent: Sunday, March 24, 2019 1:26 AM
To: users@maven.apache.org
Subject: Re: Need help.. How to configure POM for multi-module checkout
Hi Karl,
Thank you for replying on mail server. and thanks for sending me the links to
you project poms. They look awesome.
The is a difference between your projects and my situation. Your projects all
the modules reside in the same repository. In my case, they reside in different
repositories.
I elected to use the scm plugin because it allows me to select branches and
tags, based on the project and development requirements. I didn't suspect
reactor would check for poms before executing the life cycle.
I'm sure this has been solved by someone in the past. I just don't know how to
solve it using maven. I can solve it with a bunch of execute blocks, but that
is very ugly. I'm going to look at the release plugin and a few others
It's likely I'm using the wrong plugin or I'm missing a plugin.
BTW, I like your iterator plugin
cheers
gary
On 2019/03/23 23:56:48, Karl Heinz Marbaise wrote:
> Hi,
>
> I will give you the same answer as on StackOverflow.
>
> The way you are going sounds wrong...
>
> As I already suggested is the way to go creating a multi module build
> which comprises of several modules which is located within a single Git
> repository. this can be build by using a single command.
>
>
> mvn clean package
>
> from the root location..
>
> https://github.com/khmarbaise/javaee
> https://github.com/khmarbaise/supose
>
> Kind regards
> Karl Heinz Marbaise
>
> On 24.03.19 00:35, Gary M wrote:
> > Hi,
> >
> > I need some help with scm checking out multiple modules and building them.
> > I have several projects I'm consolidating into a single jar. Reactor
> > checks for module poms before generate-sources executes.
> >
> > How do I fix this issue ?
> >
> > thanks..
> > g
> >
> > POM sample to give you an idea of what I've done.
> >
> >
> >org.apache.maven.plugins
> >maven-scm-plugin
> >1.9.4
> >
> >
> >mod-1
> >generate-sources
> >
> > ${mod-1.url}
> > ${mod-1.versionType}
> > ${mod-1.version}
> > ${mod-1.directory}
> >
> >
> > checkout
> >
> >
> >
> >mod-2
> >generate-sources
> >
> > ${mod-2.url}
> > ${mod-2.versionType}
> > ${mod-2.version}
> > ${mod-2.directory}
> >
> >
> > checkout
> >
> >
> >
> >
> > .
> >
> >
> >
>
> -
> To unsubscribe, e-mail: users-unsubscr...@maven.apache.org
> For additional commands, e-mail: users-h...@maven.apache.org
>
>
-
To unsubscribe, e-mail: users-unsubscr...@maven.apache.org
For additional commands, e-mail: users-h...@maven.apache.org
How to configure maven to checkout multiple modules before module reactor fails
How should I configure maven parent pom to checkout code before Module list
fails because the pom cannot be found.
It seems the maven's reactor test for a module's pom occurs before the
generate-sources phase when scm checkouts the projects with the projects'
pom.
How can I fix this ?
thanks
target/mod-1
target/mod-2
org.apache.maven.plugins
maven-scm-plugin
1.9.4
mod-1
generate-sources
${mod-1.url}
${mod-1.versionType}
${mod-1.version}
${mod-1.directory}
checkout
mod-2
generate-sources
${mod-2.url}
${mod-2.versionType}
${mod-2.version}
${mod-2.directory}
checkout
.
--
Sent from: http://maven.40175.n5.nabble.com/Maven-Users-f40176.html
-
To unsubscribe, e-mail: users-unsubscr...@maven.apache.org
For additional commands, e-mail: users-h...@maven.apache.org
Re: Need help.. How to configure POM for multi-module checkout
Not sure that it will help with version number matches, but you could
also use Git submodules to bring multiple repositories together in a
single tree.
See: https://git-scm.com/book/en/v2/Git-Tools-Submodules
On 3/23/19 9:26 PM, ga...@oedata.com wrote:
> Hi Karl,
>
> Thank you for replying on mail server. and thanks for sending me the links to
> you project poms. They look awesome.
>
> The is a difference between your projects and my situation. Your projects all
> the modules reside in the same repository. In my case, they reside in
> different repositories.
>
> I elected to use the scm plugin because it allows me to select branches and
> tags, based on the project and development requirements. I didn't suspect
> reactor would check for poms before executing the life cycle.
>
> I'm sure this has been solved by someone in the past. I just don't know how
> to solve it using maven. I can solve it with a bunch of execute blocks, but
> that is very ugly. I'm going to look at the release plugin and a few others
>
> It's likely I'm using the wrong plugin or I'm missing a plugin.
>
> BTW, I like your iterator plugin
>
> cheers
> gary
>
>
>
>
> On 2019/03/23 23:56:48, Karl Heinz Marbaise wrote:
>> Hi,
>>
>> I will give you the same answer as on StackOverflow.
>>
>> The way you are going sounds wrong...
>>
>> As I already suggested is the way to go creating a multi module build
>> which comprises of several modules which is located within a single Git
>> repository. this can be build by using a single command.
>>
>>
>> mvn clean package
>>
>> from the root location..
>>
>> https://github.com/khmarbaise/javaee
>> https://github.com/khmarbaise/supose
>>
>> Kind regards
>> Karl Heinz Marbaise
>>
>> On 24.03.19 00:35, Gary M wrote:
>>> Hi,
>>>
>>> I need some help with scm checking out multiple modules and building them.
>>> I have several projects I'm consolidating into a single jar. Reactor
>>> checks for module poms before generate-sources executes.
>>>
>>> How do I fix this issue ?
>>>
>>> thanks..
>>> g
>>>
>>> POM sample to give you an idea of what I've done.
>>>
>>>
>>>org.apache.maven.plugins
>>>maven-scm-plugin
>>>1.9.4
>>>
>>>
>>>mod-1
>>>generate-sources
>>>
>>> ${mod-1.url}
>>> ${mod-1.versionType}
>>> ${mod-1.version}
>>> ${mod-1.directory}
>>>
>>>
>>> checkout
>>>
>>>
>>>
>>>mod-2
>>>generate-sources
>>>
>>> ${mod-2.url}
>>> ${mod-2.versionType}
>>> ${mod-2.version}
>>> ${mod-2.directory}
>>>
>>>
>>> checkout
>>>
>>>
>>>
>>>
>>> .
>>>
>>>
>>>
>> -
>> To unsubscribe, e-mail: users-unsubscr...@maven.apache.org
>> For additional commands, e-mail: users-h...@maven.apache.org
>>
>>
> -
> To unsubscribe, e-mail: users-unsubscr...@maven.apache.org
> For additional commands, e-mail: users-h...@maven.apache.org
signature.asc
Description: OpenPGP digital signature
Re: Need help.. How to configure POM for multi-module checkout
Hi Karl,
Thank you for replying on mail server. and thanks for sending me the links to
you project poms. They look awesome.
The is a difference between your projects and my situation. Your projects all
the modules reside in the same repository. In my case, they reside in different
repositories.
I elected to use the scm plugin because it allows me to select branches and
tags, based on the project and development requirements. I didn't suspect
reactor would check for poms before executing the life cycle.
I'm sure this has been solved by someone in the past. I just don't know how to
solve it using maven. I can solve it with a bunch of execute blocks, but that
is very ugly. I'm going to look at the release plugin and a few others
It's likely I'm using the wrong plugin or I'm missing a plugin.
BTW, I like your iterator plugin
cheers
gary
On 2019/03/23 23:56:48, Karl Heinz Marbaise wrote:
> Hi,
>
> I will give you the same answer as on StackOverflow.
>
> The way you are going sounds wrong...
>
> As I already suggested is the way to go creating a multi module build
> which comprises of several modules which is located within a single Git
> repository. this can be build by using a single command.
>
>
> mvn clean package
>
> from the root location..
>
> https://github.com/khmarbaise/javaee
> https://github.com/khmarbaise/supose
>
> Kind regards
> Karl Heinz Marbaise
>
> On 24.03.19 00:35, Gary M wrote:
> > Hi,
> >
> > I need some help with scm checking out multiple modules and building them.
> > I have several projects I'm consolidating into a single jar. Reactor
> > checks for module poms before generate-sources executes.
> >
> > How do I fix this issue ?
> >
> > thanks..
> > g
> >
> > POM sample to give you an idea of what I've done.
> >
> >
> >org.apache.maven.plugins
> >maven-scm-plugin
> >1.9.4
> >
> >
> >mod-1
> >generate-sources
> >
> > ${mod-1.url}
> > ${mod-1.versionType}
> > ${mod-1.version}
> > ${mod-1.directory}
> >
> >
> > checkout
> >
> >
> >
> >mod-2
> >generate-sources
> >
> > ${mod-2.url}
> > ${mod-2.versionType}
> > ${mod-2.version}
> > ${mod-2.directory}
> >
> >
> > checkout
> >
> >
> >
> >
> > .
> >
> >
> >
>
> -
> To unsubscribe, e-mail: users-unsubscr...@maven.apache.org
> For additional commands, e-mail: users-h...@maven.apache.org
>
>
-
To unsubscribe, e-mail: users-unsubscr...@maven.apache.org
For additional commands, e-mail: users-h...@maven.apache.org
Re: Need help.. How to configure POM for multi-module checkout
Hi,
I will give you the same answer as on StackOverflow.
The way you are going sounds wrong...
As I already suggested is the way to go creating a multi module build
which comprises of several modules which is located within a single Git
repository. this can be build by using a single command.
mvn clean package
from the root location..
https://github.com/khmarbaise/javaee
https://github.com/khmarbaise/supose
Kind regards
Karl Heinz Marbaise
On 24.03.19 00:35, Gary M wrote:
Hi,
I need some help with scm checking out multiple modules and building them.
I have several projects I'm consolidating into a single jar. Reactor
checks for module poms before generate-sources executes.
How do I fix this issue ?
thanks..
g
POM sample to give you an idea of what I've done.
org.apache.maven.plugins
maven-scm-plugin
1.9.4
mod-1
generate-sources
${mod-1.url}
${mod-1.versionType}
${mod-1.version}
${mod-1.directory}
checkout
mod-2
generate-sources
${mod-2.url}
${mod-2.versionType}
${mod-2.version}
${mod-2.directory}
checkout
.
-
To unsubscribe, e-mail: users-unsubscr...@maven.apache.org
For additional commands, e-mail: users-h...@maven.apache.org
Need help.. How to configure POM for multi-module checkout
Hi,
I need some help with scm checking out multiple modules and building them.
I have several projects I'm consolidating into a single jar. Reactor
checks for module poms before generate-sources executes.
How do I fix this issue ?
thanks..
g
POM sample to give you an idea of what I've done.
org.apache.maven.plugins
maven-scm-plugin
1.9.4
mod-1
generate-sources
${mod-1.url}
${mod-1.versionType}
${mod-1.version}
${mod-1.directory}
checkout
mod-2
generate-sources
${mod-2.url}
${mod-2.versionType}
${mod-2.version}
${mod-2.directory}
checkout
.
How to configure java.util.logging for a forked failsafe invocation?
Hi,
As suggested here: https://stackoverflow.com/a/12276898/634324 I'm simply
doing this (using the updated rather than deprecated prop name) which forks
a JVM (the default):
maven-failsafe-plugin
2.22.0
${project.basedir}/src/test/resources/logging.properties
default-integration-test
integration-test
integration-test
But it doesn't seem to be having any effect.
I stepped through it a bit in the debugger... enough to see that it seems
to be that this sequence:
https://github.com/apache/maven-surefire/blob/19ea21e3d7681c33a158dd7e06e8b5a993a33d85/surefire-booter/src/main/java/org/apache/maven/surefire/booter/ForkedBooter.java#L91-L95
ends up initializing the LogManager before a system prop
like java.util.logging.config.file can be set.
If this sounds like it'd be worth capturing in an issue/JIRA, I could add
more detail, but first wanted to check this wasn't a known problem or a
usage error... (or if the "solution" is just not to fork which I wasn't
hoping to resort to yet).
Thanks,
Scott Kurz
AW: How to configure maven-dependency-plugin's encoding used for unpack?
No I have never heard of vfs-maven-plugin before, and I doubt it will be an easy solution, as the "download" address is not known in the POM -- it is a DEPENDENCY, hence the dependency resolution mechanism has to be used. -Ursprüngliche Nachricht- Von: Andreas Gudian [mailto:andreas.gud...@gmail.com] Gesendet: Dienstag, 17. März 2015 20:20 An: Maven Users List Betreff: Re: How to configure maven-dependency-plugin's encoding used for unpack? Markus, as for an "ASAP" quick fix, did you try using the vfs-maven-plugin to unpack your zip files? I don't fully understand your usecase, but I use that one to download and unpack zip files within a maven build. 2015-03-17 13:34 GMT+01:00 Kristian Rosenvold : > I can guarantee a timely review, which is about as much as we > guarantee around here :) > > There is a practical issue, since maven assembly plugin uses a > parameter called "archiverConfig" configure the Archiver. I am still > pondering if for assembly I should supply the *same* config object or > create a separate one called "unarchiverConfig". The same would apply > for dependency plugin, since we'd definitely want this to be done in > the same manner. > > Kristian > > > 2015-03-17 9:49 GMT+01:00 Markus Karg : > > Great, thanks a lot! :-) > > > > But let's negotiate one thing upfront: If we provide code that adds > to maven-dependency-plugin's , which > essentially forwards the encoding to the Plexus Unarchiver, and it > looks good to you from a technical view, will you guarantee us that it > will definitively up in the plugin? I have to ask that upfront because > of the discussion going on here currently about the general usefulness > of encodings and we must not spend any time into providing code if it > ends up in the trash due to different opinions within the pluging > management team. So if you can ensure this, we will lookup some people coding > the solution. > > > > Thanks! > > -Markus > > > > > > -Ursprüngliche Nachricht- > > Von: kristian.rosenv...@zenior.no > > [mailto:kristian.rosenv...@zenior.no] > Im Auftrag von Kristian Rosenvold > > Gesendet: Dienstag, 17. März 2015 08:39 > > An: Maven Users List > > Betreff: Re: How to configure maven-dependency-plugin's encoding > > used > for unpack? > > > > I'm not kidding about anything. I reopened the issue. > > > > If you make a patch that applies encoding to zip files I can review that. > > > > Kristian > > > > > > 2015-03-17 8:27 GMT+01:00 Markus Karg : > > > >> Kristian, > >> > >> you're kidding, don't you? ;-) > >> > >> what you propose does not work. We are an ISV providing a download > >> for virtually anybody. We cannot tell the world "Hey, you cannot > >> simply use Windows to unzip, but you must first download some other > >> application, because we're using Maven, and it is unable to deal > >> with encodings.". :-( > >> > >> We are NOT packaging a "jar" file. We are packaging a "zip" file. > >> In fact I never mentioned "jar" AFAIK. That one is publicly downloadable. > >> Some team told us they use that "zip" as a dependency and need to > >> unpack it as part of their "prepare-package" phase (they only need > >> some files, not the full zip). At that moment, then file names are > >> turned into garbage. If there is headroom, then let's use that > >> headroom. All we demand is a way to tell in the POM that the plexus > >> "zip unarchiver" used by maven-dependency-plugin for that single > >> artifactItem shall use CP850. :-) > >> > >> I'm talking about http://jira.codehaus.org/browse/MDEP-436 > >> > >> Thank you for your kind help. > >> > >> Regards > >> -Markus > >> > >> > >> -Ursprüngliche Nachricht- > >> Von: kristian.rosenv...@zenior.no > >> [mailto:kristian.rosenv...@zenior.no] > >> Im Auftrag von Kristian Rosenvold > >> Gesendet: Montag, 16. März 2015 21:19 > >> An: Maven Users List > >> Betreff: Re: How to configure maven-dependency-plugin's encoding > >> used for unpack? > >> > >> There is no way to specify unarchiver encoding in the dependency > >> plugin, I have checked. So currently you have to make your users > >> install a less brain dead zip program than the windows compressed > folder mechanism. > >> &g
Re: How to configure maven-dependency-plugin's encoding used for unpack?
Markus, as for an "ASAP" quick fix, did you try using the vfs-maven-plugin to unpack your zip files? I don't fully understand your usecase, but I use that one to download and unpack zip files within a maven build. 2015-03-17 13:34 GMT+01:00 Kristian Rosenvold : > I can guarantee a timely review, which is about as much as we > guarantee around here :) > > There is a practical issue, since maven assembly plugin uses a > parameter called "archiverConfig" configure the Archiver. I am still > pondering if for assembly I should supply the *same* config object or > create a separate one called "unarchiverConfig". The same would apply > for dependency plugin, since we'd definitely want this to be done in > the same manner. > > Kristian > > > 2015-03-17 9:49 GMT+01:00 Markus Karg : > > Great, thanks a lot! :-) > > > > But let's negotiate one thing upfront: If we provide code that adds > to maven-dependency-plugin's , which essentially > forwards the encoding to the Plexus Unarchiver, and it looks good to you > from a technical view, will you guarantee us that it will definitively up > in the plugin? I have to ask that upfront because of the discussion going > on here currently about the general usefulness of encodings and we must not > spend any time into providing code if it ends up in the trash due to > different opinions within the pluging management team. So if you can ensure > this, we will lookup some people coding the solution. > > > > Thanks! > > -Markus > > > > > > -Ursprüngliche Nachricht- > > Von: kristian.rosenv...@zenior.no [mailto:kristian.rosenv...@zenior.no] > Im Auftrag von Kristian Rosenvold > > Gesendet: Dienstag, 17. März 2015 08:39 > > An: Maven Users List > > Betreff: Re: How to configure maven-dependency-plugin's encoding used > for unpack? > > > > I'm not kidding about anything. I reopened the issue. > > > > If you make a patch that applies encoding to zip files I can review that. > > > > Kristian > > > > > > 2015-03-17 8:27 GMT+01:00 Markus Karg : > > > >> Kristian, > >> > >> you're kidding, don't you? ;-) > >> > >> what you propose does not work. We are an ISV providing a download for > >> virtually anybody. We cannot tell the world "Hey, you cannot simply > >> use Windows to unzip, but you must first download some other > >> application, because we're using Maven, and it is unable to deal with > >> encodings.". :-( > >> > >> We are NOT packaging a "jar" file. We are packaging a "zip" file. In > >> fact I never mentioned "jar" AFAIK. That one is publicly downloadable. > >> Some team told us they use that "zip" as a dependency and need to > >> unpack it as part of their "prepare-package" phase (they only need > >> some files, not the full zip). At that moment, then file names are > >> turned into garbage. If there is headroom, then let's use that > >> headroom. All we demand is a way to tell in the POM that the plexus > >> "zip unarchiver" used by maven-dependency-plugin for that single > >> artifactItem shall use CP850. :-) > >> > >> I'm talking about http://jira.codehaus.org/browse/MDEP-436 > >> > >> Thank you for your kind help. > >> > >> Regards > >> -Markus > >> > >> > >> -Ursprüngliche Nachricht- > >> Von: kristian.rosenv...@zenior.no > >> [mailto:kristian.rosenv...@zenior.no] > >> Im Auftrag von Kristian Rosenvold > >> Gesendet: Montag, 16. März 2015 21:19 > >> An: Maven Users List > >> Betreff: Re: How to configure maven-dependency-plugin's encoding used > >> for unpack? > >> > >> There is no way to specify unarchiver encoding in the dependency > >> plugin, I have checked. So currently you have to make your users > >> install a less brain dead zip program than the windows compressed > folder mechanism. > >> > >> I am also slightly questioning of what you are trying to achieve here; > >> if you are unpacking a "jar" file then it *will* and *should* be UTF8, > >> meaning you cannot use the lobotomized zip support that is included in > >> windows, no matter what. I don't see us fixing /that/ issue, since > >> we'd be violating the jar specification. If your dependency is to an > >> actual "zip" file, we have slightly more headroom, and suc
Re: How to configure maven-dependency-plugin's encoding used for unpack?
I can guarantee a timely review, which is about as much as we guarantee around here :) There is a practical issue, since maven assembly plugin uses a parameter called "archiverConfig" configure the Archiver. I am still pondering if for assembly I should supply the *same* config object or create a separate one called "unarchiverConfig". The same would apply for dependency plugin, since we'd definitely want this to be done in the same manner. Kristian 2015-03-17 9:49 GMT+01:00 Markus Karg : > Great, thanks a lot! :-) > > But let's negotiate one thing upfront: If we provide code that adds > to maven-dependency-plugin's , which essentially > forwards the encoding to the Plexus Unarchiver, and it looks good to you from > a technical view, will you guarantee us that it will definitively up in the > plugin? I have to ask that upfront because of the discussion going on here > currently about the general usefulness of encodings and we must not spend any > time into providing code if it ends up in the trash due to different opinions > within the pluging management team. So if you can ensure this, we will lookup > some people coding the solution. > > Thanks! > -Markus > > > -Ursprüngliche Nachricht- > Von: kristian.rosenv...@zenior.no [mailto:kristian.rosenv...@zenior.no] Im > Auftrag von Kristian Rosenvold > Gesendet: Dienstag, 17. März 2015 08:39 > An: Maven Users List > Betreff: Re: How to configure maven-dependency-plugin's encoding used for > unpack? > > I'm not kidding about anything. I reopened the issue. > > If you make a patch that applies encoding to zip files I can review that. > > Kristian > > > 2015-03-17 8:27 GMT+01:00 Markus Karg : > >> Kristian, >> >> you're kidding, don't you? ;-) >> >> what you propose does not work. We are an ISV providing a download for >> virtually anybody. We cannot tell the world "Hey, you cannot simply >> use Windows to unzip, but you must first download some other >> application, because we're using Maven, and it is unable to deal with >> encodings.". :-( >> >> We are NOT packaging a "jar" file. We are packaging a "zip" file. In >> fact I never mentioned "jar" AFAIK. That one is publicly downloadable. >> Some team told us they use that "zip" as a dependency and need to >> unpack it as part of their "prepare-package" phase (they only need >> some files, not the full zip). At that moment, then file names are >> turned into garbage. If there is headroom, then let's use that >> headroom. All we demand is a way to tell in the POM that the plexus >> "zip unarchiver" used by maven-dependency-plugin for that single >> artifactItem shall use CP850. :-) >> >> I'm talking about http://jira.codehaus.org/browse/MDEP-436 >> >> Thank you for your kind help. >> >> Regards >> -Markus >> >> >> -Ursprüngliche Nachricht- >> Von: kristian.rosenv...@zenior.no >> [mailto:kristian.rosenv...@zenior.no] >> Im Auftrag von Kristian Rosenvold >> Gesendet: Montag, 16. März 2015 21:19 >> An: Maven Users List >> Betreff: Re: How to configure maven-dependency-plugin's encoding used >> for unpack? >> >> There is no way to specify unarchiver encoding in the dependency >> plugin, I have checked. So currently you have to make your users >> install a less brain dead zip program than the windows compressed folder >> mechanism. >> >> I am also slightly questioning of what you are trying to achieve here; >> if you are unpacking a "jar" file then it *will* and *should* be UTF8, >> meaning you cannot use the lobotomized zip support that is included in >> windows, no matter what. I don't see us fixing /that/ issue, since >> we'd be violating the jar specification. If your dependency is to an >> actual "zip" file, we have slightly more headroom, and such a patch might be >> applied. >> >> I am not sure which issue you are referring to, I know there is one >> for assembly-plugin (http://jira.codehaus.org/browse/MASSEMBLY-748) >> since the encoding feature should be fixed to work for "unpack" too. >> >> Kristian >> >> >> >> >> 2015-03-16 15:04 GMT+01:00 Markus Karg : >> >> > Kristian, >> > >> > can you please reopen the item then? I mean, it simply is not fixed, >> > because UTF-8 ZIPs are not a solution: Windows cannot correctly >> > display them, so people on the Windows world will virtually every >>
AW: How to configure maven-dependency-plugin's encoding used for unpack?
Great, thanks a lot! :-) But let's negotiate one thing upfront: If we provide code that adds to maven-dependency-plugin's , which essentially forwards the encoding to the Plexus Unarchiver, and it looks good to you from a technical view, will you guarantee us that it will definitively up in the plugin? I have to ask that upfront because of the discussion going on here currently about the general usefulness of encodings and we must not spend any time into providing code if it ends up in the trash due to different opinions within the pluging management team. So if you can ensure this, we will lookup some people coding the solution. Thanks! -Markus -Ursprüngliche Nachricht- Von: kristian.rosenv...@zenior.no [mailto:kristian.rosenv...@zenior.no] Im Auftrag von Kristian Rosenvold Gesendet: Dienstag, 17. März 2015 08:39 An: Maven Users List Betreff: Re: How to configure maven-dependency-plugin's encoding used for unpack? I'm not kidding about anything. I reopened the issue. If you make a patch that applies encoding to zip files I can review that. Kristian 2015-03-17 8:27 GMT+01:00 Markus Karg : > Kristian, > > you're kidding, don't you? ;-) > > what you propose does not work. We are an ISV providing a download for > virtually anybody. We cannot tell the world "Hey, you cannot simply > use Windows to unzip, but you must first download some other > application, because we're using Maven, and it is unable to deal with > encodings.". :-( > > We are NOT packaging a "jar" file. We are packaging a "zip" file. In > fact I never mentioned "jar" AFAIK. That one is publicly downloadable. > Some team told us they use that "zip" as a dependency and need to > unpack it as part of their "prepare-package" phase (they only need > some files, not the full zip). At that moment, then file names are > turned into garbage. If there is headroom, then let's use that > headroom. All we demand is a way to tell in the POM that the plexus > "zip unarchiver" used by maven-dependency-plugin for that single > artifactItem shall use CP850. :-) > > I'm talking about http://jira.codehaus.org/browse/MDEP-436 > > Thank you for your kind help. > > Regards > -Markus > > > -Ursprüngliche Nachricht----- > Von: kristian.rosenv...@zenior.no > [mailto:kristian.rosenv...@zenior.no] > Im Auftrag von Kristian Rosenvold > Gesendet: Montag, 16. März 2015 21:19 > An: Maven Users List > Betreff: Re: How to configure maven-dependency-plugin's encoding used > for unpack? > > There is no way to specify unarchiver encoding in the dependency > plugin, I have checked. So currently you have to make your users > install a less brain dead zip program than the windows compressed folder > mechanism. > > I am also slightly questioning of what you are trying to achieve here; > if you are unpacking a "jar" file then it *will* and *should* be UTF8, > meaning you cannot use the lobotomized zip support that is included in > windows, no matter what. I don't see us fixing /that/ issue, since > we'd be violating the jar specification. If your dependency is to an > actual "zip" file, we have slightly more headroom, and such a patch might be > applied. > > I am not sure which issue you are referring to, I know there is one > for assembly-plugin (http://jira.codehaus.org/browse/MASSEMBLY-748) > since the encoding feature should be fixed to work for "unpack" too. > > Kristian > > > > > 2015-03-16 15:04 GMT+01:00 Markus Karg : > > > Kristian, > > > > can you please reopen the item then? I mean, it simply is not fixed, > > because UTF-8 ZIPs are not a solution: Windows cannot correctly > > display them, so people on the Windows world will virtually every > > create > CP850-ZIPs! > > > > Do you know about any plans to support this, or what is the intended > > future of this issue? > > > > Thanks > > -Markus > > > > -Ursprüngliche Nachricht- > > Von: kristian.rosenv...@zenior.no > > [mailto:kristian.rosenv...@zenior.no] > > Im Auftrag von Kristian Rosenvold > > Gesendet: Montag, 16. März 2015 13:46 > > An: Maven Users List > > Betreff: Re: How to configure maven-dependency-plugin's encoding > > used for unpack? > > > > I did not actually look at the implementation on the dependency > > plugin, but it is actually technically impossible to supply the > > encoding parameter to > > *unzip* via the tag. So until this is fixed, UTF-8 > > zip archives are the only ones that will work (with plexus unzip > archiver)
AW: AW: How to configure maven-dependency-plugin's encoding used for unpack?
Hervé, can you please elaborate for non-committers like me: (a) Why shall I open another issue that contains essentially the same text as the already-existing and non-fixed-but-marked-as-resolved one http://jira.codehaus.org/browse/MDEP-436 ? The result would be the same: Kristian assumes it is fixed, and again closes it. So what do we gain ? (b) Why adding a new configuration property to maven-dependency-plugin's would (even hypothetically) break anything ? (c) What you assume how anybody should be able to use maven-dependency-plugin's unpack target on CP850-ZIPs ? Just to make me understand. :-) Thanks -Markus -Ursprüngliche Nachricht- Von: Hervé BOUTEMY [mailto:herve.bout...@free.fr] Gesendet: Dienstag, 17. März 2015 08:36 An: Maven Users List Betreff: Re: AW: How to configure maven-dependency-plugin's encoding used for unpack? Le mardi 17 mars 2015 08:19:20 Markus Karg a écrit : > (1) "Normal users" (non-comitters) do not have permission to reopen > issues so I really beg for your kind help to reopen this issue for me! > :-) no, please don't reopen the issue: open another issue > (2) Despite all the quirks of Windows, the ZIP specification does not > say a word about encoding, we had the discussion on dev@ mailing list in october and we based our decision partly on PKWARE's old documentation see http://mail-archives.apache.org/mod_mbox/maven-dev/201410.mbox/%3C1632789.Hzz1ElkyQm%40herve-desktop%3E > so it is pretty correct to use any decoding in ZIPs. > As a consequence, maven-dependency-plugin MUST either be able to > detect the encoding OR MUST have configurable encoding (plexus > unarchiver already provides setEncoding BTW). > I actually do not understand the discussion about this. I have such > ZIPs, these are compliant with the ZIP specification, please provide the Zip specifications you're referring to: having a common reference is the first problem we faced, ie we could not find any shared reference > and maven-dependency-plugin > cannot handle it. So instead of complaining about Windows being quirky > wouldn't it make more sense to simply provide maven-dependency-plugin > the same option that maven-assembly-plugin already has? I > mean, that would be straightforward, simple to implement, pragmatic > and would actually help us (we are stuck with this!) while discussions about > Windows do not. > ;-) I suppose there are multiple zip encoders and decoders on every platform: the problem is with some decoders, IIUC, not the whole platform that executes it > Maybe there is a trick so one can configure plexus unarchiver's > setEncoding via the POM, but we simply don't know how to do that. So > if you know that trick, then please share your knowledge with us. We > do not insist on a fix for the plugin, but we really need a solution > ASAP! :-) given the problem on shared zip structure reference, we really fear that fixing the issue for one user will break the other one, using another zip decoder Regards, Hervé > Thanks a lot! > -Markus > > -Ursprüngliche Nachricht- > Von: kristian.rosenv...@zenior.no > [mailto:kristian.rosenv...@zenior.no] Im Auftrag von Kristian > Rosenvold Gesendet: Dienstag, 17. März 2015 07:06 > An: Maven Users List > Betreff: Re: How to configure maven-dependency-plugin's encoding used > for unpack? > This is really only a question about the borked "zip file" explorer > that is default in windows. Quality zip clients always works fine on Windows. > The miserable story is documented entirely at > http://commons.apache.org/proper/commons-compress/zip.html#Encoding > and is an enjoyable read for anyone who wants the full story :) > For the assembly plugin I have scheduled > http://jira.codehaus.org/browse/MASSEMBLY-748 for the next release, > which should be soonish. > For the dependency plugin I am still not convinced that this should be > supported. Unlike the ZIP specification, the Jar specification is > crystal clear on "UTF-8" only, which means we'd be breaking something > that is not broken. > Kristian > > > > > > 2015-03-17 6:39 GMT+01:00 Baptiste Mathus : > > > > And this is actually not even always true, CP1252 is also often used > > on Windows (in France for example). > > > > > > > > Encoding is actually a quite "simple" problem, but transfer makes it > > difficult to handle as each move has to take care of what it does. > > As for the JIRA tickets, if you feel this is not OK, feel free to > > comment/reopen/create the ones you want. > > But also beware that without a patch, in that very specific > > situation, it's not very likely someone else
Re: How to configure maven-dependency-plugin's encoding used for unpack?
Herve; Markus is right. when we switched to default UTF-8 like the rest of the world, users of legacy windows versions "lost" the option to unzip with default locale, which had been the behaviour up to that point. This is really nothing to discuss and there is no further reason to aggreviate Markus by requiring more docs or arguments :) Kristian 2015-03-17 8:39 GMT+01:00 Kristian Rosenvold : > I'm not kidding about anything. I reopened the issue. > > If you make a patch that applies encoding to zip files I can review that. > > Kristian > > > 2015-03-17 8:27 GMT+01:00 Markus Karg : > >> Kristian, >> >> you're kidding, don't you? ;-) >> >> what you propose does not work. We are an ISV providing a download for >> virtually anybody. We cannot tell the world "Hey, you cannot simply use >> Windows to unzip, but you must first download some other application, >> because we're using Maven, and it is unable to deal with encodings.". :-( >> >> We are NOT packaging a "jar" file. We are packaging a "zip" file. In fact >> I never mentioned "jar" AFAIK. That one is publicly downloadable. Some team >> told us they use that "zip" as a dependency and need to unpack it as part >> of their "prepare-package" phase (they only need some files, not the full >> zip). At that moment, then file names are turned into garbage. If there is >> headroom, then let's use that headroom. All we demand is a way to tell in >> the POM that the plexus "zip unarchiver" used by maven-dependency-plugin >> for that single artifactItem shall use CP850. :-) >> >> I'm talking about http://jira.codehaus.org/browse/MDEP-436 >> >> Thank you for your kind help. >> >> Regards >> -Markus >> >> >> -Ursprüngliche Nachricht- >> Von: kristian.rosenv...@zenior.no [mailto:kristian.rosenv...@zenior.no] >> Im Auftrag von Kristian Rosenvold >> Gesendet: Montag, 16. März 2015 21:19 >> An: Maven Users List >> Betreff: Re: How to configure maven-dependency-plugin's encoding used for >> unpack? >> >> There is no way to specify unarchiver encoding in the dependency plugin, >> I have checked. So currently you have to make your users install a less >> brain dead zip program than the windows compressed folder mechanism. >> >> I am also slightly questioning of what you are trying to achieve here; if >> you are unpacking a "jar" file then it *will* and *should* be UTF8, meaning >> you cannot use the lobotomized zip support that is included in windows, no >> matter what. I don't see us fixing /that/ issue, since we'd be violating >> the jar specification. If your dependency is to an actual "zip" file, we >> have slightly more headroom, and such a patch might be applied. >> >> I am not sure which issue you are referring to, I know there is one for >> assembly-plugin (http://jira.codehaus.org/browse/MASSEMBLY-748) since >> the encoding feature should be fixed to work for "unpack" too. >> >> Kristian >> >> >> >> >> 2015-03-16 15:04 GMT+01:00 Markus Karg : >> >> > Kristian, >> > >> > can you please reopen the item then? I mean, it simply is not fixed, >> > because UTF-8 ZIPs are not a solution: Windows cannot correctly >> > display them, so people on the Windows world will virtually every >> create CP850-ZIPs! >> > >> > Do you know about any plans to support this, or what is the intended >> > future of this issue? >> > >> > Thanks >> > -Markus >> > >> > -Ursprüngliche Nachricht- >> > Von: kristian.rosenv...@zenior.no >> > [mailto:kristian.rosenv...@zenior.no] >> > Im Auftrag von Kristian Rosenvold >> > Gesendet: Montag, 16. März 2015 13:46 >> > An: Maven Users List >> > Betreff: Re: How to configure maven-dependency-plugin's encoding used >> > for unpack? >> > >> > I did not actually look at the implementation on the dependency >> > plugin, but it is actually technically impossible to supply the >> > encoding parameter to >> > *unzip* via the tag. So until this is fixed, UTF-8 >> > zip archives are the only ones that will work (with plexus unzip >> archiver). >> > >> > Kristian >> > >> > >> > 2015-03-16 13:05 GMT+01:00 Adrien Rivard : >> > >> > > If I'm reading the documentation correctly, >> > > on
Re: How to configure maven-dependency-plugin's encoding used for unpack?
I'm not kidding about anything. I reopened the issue. If you make a patch that applies encoding to zip files I can review that. Kristian 2015-03-17 8:27 GMT+01:00 Markus Karg : > Kristian, > > you're kidding, don't you? ;-) > > what you propose does not work. We are an ISV providing a download for > virtually anybody. We cannot tell the world "Hey, you cannot simply use > Windows to unzip, but you must first download some other application, > because we're using Maven, and it is unable to deal with encodings.". :-( > > We are NOT packaging a "jar" file. We are packaging a "zip" file. In fact > I never mentioned "jar" AFAIK. That one is publicly downloadable. Some team > told us they use that "zip" as a dependency and need to unpack it as part > of their "prepare-package" phase (they only need some files, not the full > zip). At that moment, then file names are turned into garbage. If there is > headroom, then let's use that headroom. All we demand is a way to tell in > the POM that the plexus "zip unarchiver" used by maven-dependency-plugin > for that single artifactItem shall use CP850. :-) > > I'm talking about http://jira.codehaus.org/browse/MDEP-436 > > Thank you for your kind help. > > Regards > -Markus > > > -Ursprüngliche Nachricht- > Von: kristian.rosenv...@zenior.no [mailto:kristian.rosenv...@zenior.no] > Im Auftrag von Kristian Rosenvold > Gesendet: Montag, 16. März 2015 21:19 > An: Maven Users List > Betreff: Re: How to configure maven-dependency-plugin's encoding used for > unpack? > > There is no way to specify unarchiver encoding in the dependency plugin, I > have checked. So currently you have to make your users install a less brain > dead zip program than the windows compressed folder mechanism. > > I am also slightly questioning of what you are trying to achieve here; if > you are unpacking a "jar" file then it *will* and *should* be UTF8, meaning > you cannot use the lobotomized zip support that is included in windows, no > matter what. I don't see us fixing /that/ issue, since we'd be violating > the jar specification. If your dependency is to an actual "zip" file, we > have slightly more headroom, and such a patch might be applied. > > I am not sure which issue you are referring to, I know there is one for > assembly-plugin (http://jira.codehaus.org/browse/MASSEMBLY-748) since the > encoding feature should be fixed to work for "unpack" too. > > Kristian > > > > > 2015-03-16 15:04 GMT+01:00 Markus Karg : > > > Kristian, > > > > can you please reopen the item then? I mean, it simply is not fixed, > > because UTF-8 ZIPs are not a solution: Windows cannot correctly > > display them, so people on the Windows world will virtually every create > CP850-ZIPs! > > > > Do you know about any plans to support this, or what is the intended > > future of this issue? > > > > Thanks > > -Markus > > > > -Ursprüngliche Nachricht- > > Von: kristian.rosenv...@zenior.no > > [mailto:kristian.rosenv...@zenior.no] > > Im Auftrag von Kristian Rosenvold > > Gesendet: Montag, 16. März 2015 13:46 > > An: Maven Users List > > Betreff: Re: How to configure maven-dependency-plugin's encoding used > > for unpack? > > > > I did not actually look at the implementation on the dependency > > plugin, but it is actually technically impossible to supply the > > encoding parameter to > > *unzip* via the tag. So until this is fixed, UTF-8 > > zip archives are the only ones that will work (with plexus unzip > archiver). > > > > Kristian > > > > > > 2015-03-16 13:05 GMT+01:00 Adrien Rivard : > > > > > If I'm reading the documentation correctly, > > > only apply to filter resources, not to zip > them. > > > > > > In any case I would try using utf-8. > > > > > > > > > On Mon, Mar 16, 2015 at 12:34 PM, Kristian Rosenvold < > > > kristian.rosenv...@gmail.com> wrote: > > > > > > > I dont believe there is support for specifying encoding to unzip. > > > > At > > > least > > > > assembly only provides config to zip. Call it a bug, call it a > > > > feature :( > > > > > > > > Kristian > > > > > > > > > > > > 2015-03-16 12:12 GMT+01:00 Markus Karg : > > > > > > > > > To preserve German umlauts in file names within a ZIP, we are > > using... > > > > > > > > > > > > > > > CP850 > > > > > > > > > > > > > > > ...in the maven-assembly-plugin configuration, which is working > well. > > > :) > > > > > > > > > > Next we want to use maven-dependency-plugin to unpack that ZIP. > > > > > > > > > > How can we configure maven-dependency-plugin:unpack so it will > > > > > apply > > > > CP850 > > > > > when unpacking that ZIP? > > > > > > > > > > Thanks! > > > > > -Markus > > > > > > > > > > > > > > > > > > > > > -- > > > Adrien Rivard > > > > > >
AW: How to configure maven-dependency-plugin's encoding used for unpack?
The ASSEMBLY plugin forwards its own to the Plexus Archiver internally. That way you can create ZIPs with CP850. :-) The DEPENDENCY plugin intenrally uses the Plexus ZipUnarchiver. The Plexus ZipUnarchiver is a special form of the AbstractUnarchiver, which has a method setEncoding(String) (http://plexus.codehaus.org/plexus-components/plexus-archiver/apidocs/org/codehaus/plexus/archiver/zip/AbstractZipUnArchiver.html#setEncoding(java.lang.String) ). But the dependency plugin has no to forwards to the Plexus ZipArchiver to make use it this. :-( -Ursprüngliche Nachricht- Von: kristian.rosenv...@zenior.no [mailto:kristian.rosenv...@zenior.no] Im Auftrag von Kristian Rosenvold Gesendet: Montag, 16. März 2015 20:25 An: Maven Users List Betreff: Re: How to configure maven-dependency-plugin's encoding used for unpack? I don't really see that the dependency plugin has any support for encoding in pack or unpack. Where did you see that ? Kristian 2015-03-16 15:04 GMT+01:00 Markus Karg : > Kristian, > > can you please reopen the item then? I mean, it simply is not fixed, > because UTF-8 ZIPs are not a solution: Windows cannot correctly > display them, so people on the Windows world will virtually every create > CP850-ZIPs! > > Do you know about any plans to support this, or what is the intended > future of this issue? > > Thanks > -Markus > > -Ursprüngliche Nachricht- > Von: kristian.rosenv...@zenior.no > [mailto:kristian.rosenv...@zenior.no] > Im Auftrag von Kristian Rosenvold > Gesendet: Montag, 16. März 2015 13:46 > An: Maven Users List > Betreff: Re: How to configure maven-dependency-plugin's encoding used > for unpack? > > I did not actually look at the implementation on the dependency > plugin, but it is actually technically impossible to supply the > encoding parameter to > *unzip* via the tag. So until this is fixed, UTF-8 > zip archives are the only ones that will work (with plexus unzip archiver). > > Kristian > > > 2015-03-16 13:05 GMT+01:00 Adrien Rivard : > > > If I'm reading the documentation correctly, > > only apply to filter resources, not to zip them. > > > > In any case I would try using utf-8. > > > > > > On Mon, Mar 16, 2015 at 12:34 PM, Kristian Rosenvold < > > kristian.rosenv...@gmail.com> wrote: > > > > > I dont believe there is support for specifying encoding to unzip. > > > At > > least > > > assembly only provides config to zip. Call it a bug, call it a > > > feature :( > > > > > > Kristian > > > > > > > > > 2015-03-16 12:12 GMT+01:00 Markus Karg : > > > > > > > To preserve German umlauts in file names within a ZIP, we are > using... > > > > > > > > > > > > CP850 > > > > > > > > > > > > ...in the maven-assembly-plugin configuration, which is working well. > > :) > > > > > > > > Next we want to use maven-dependency-plugin to unpack that ZIP. > > > > > > > > How can we configure maven-dependency-plugin:unpack so it will > > > > apply > > > CP850 > > > > when unpacking that ZIP? > > > > > > > > Thanks! > > > > -Markus > > > > > > > > > > > > > > > -- > > Adrien Rivard > > > - To unsubscribe, e-mail: users-unsubscr...@maven.apache.org For additional commands, e-mail: users-h...@maven.apache.org
Re: AW: How to configure maven-dependency-plugin's encoding used for unpack?
Le mardi 17 mars 2015 08:19:20 Markus Karg a écrit : > (1) "Normal users" (non-comitters) do not have permission to reopen issues > so I really beg for your kind help to reopen this issue for me! :-) no, please don't reopen the issue: open another issue > (2) Despite all the quirks of Windows, the ZIP specification does not say a > word about encoding, we had the discussion on dev@ mailing list in october and we based our decision partly on PKWARE's old documentation see http://mail-archives.apache.org/mod_mbox/maven-dev/201410.mbox/%3C1632789.Hzz1ElkyQm%40herve-desktop%3E > so it is pretty correct to use any decoding in ZIPs. > As a consequence, maven-dependency-plugin MUST either be able to detect the > encoding OR MUST have configurable encoding (plexus unarchiver already > provides setEncoding BTW). > I actually do not understand the discussion about this. I have such ZIPs, > these are compliant with the ZIP specification, please provide the Zip specifications you're referring to: having a common reference is the first problem we faced, ie we could not find any shared reference > and maven-dependency-plugin > cannot handle it. So instead of complaining about Windows being quirky > wouldn't it make more sense to simply provide maven-dependency-plugin the > same option that maven-assembly-plugin already has? I mean, that > would be straightforward, simple to implement, pragmatic and would actually > help us (we are stuck with this!) while discussions about Windows do not. > ;-) I suppose there are multiple zip encoders and decoders on every platform: the problem is with some decoders, IIUC, not the whole platform that executes it > Maybe there is a trick so one can configure plexus unarchiver's setEncoding > via the POM, but we simply don't know how to do that. So if you know that > trick, then please share your knowledge with us. We do not insist on a fix > for the plugin, but we really need a solution ASAP! :-) given the problem on shared zip structure reference, we really fear that fixing the issue for one user will break the other one, using another zip decoder Regards, Hervé > Thanks a lot! > -Markus > > -Ursprüngliche Nachricht- > Von: kristian.rosenv...@zenior.no [mailto:kristian.rosenv...@zenior.no] Im > Auftrag von Kristian Rosenvold Gesendet: Dienstag, 17. März 2015 07:06 > An: Maven Users List > Betreff: Re: How to configure maven-dependency-plugin's encoding used for > unpack? > This is really only a question about the borked "zip file" explorer that is > default in windows. Quality zip clients always works fine on Windows. > The miserable story is documented entirely at > http://commons.apache.org/proper/commons-compress/zip.html#Encoding and is > an enjoyable read for anyone who wants the full story :) > For the assembly plugin I have scheduled > http://jira.codehaus.org/browse/MASSEMBLY-748 for the next release, which > should be soonish. > For the dependency plugin I am still not convinced that this should be > supported. Unlike the ZIP specification, the Jar specification is crystal > clear on "UTF-8" only, which means we'd be breaking something that is not > broken. > Kristian > > > > > > 2015-03-17 6:39 GMT+01:00 Baptiste Mathus : > > > > And this is actually not even always true, CP1252 is also often used > > on Windows (in France for example). > > > > > > > > Encoding is actually a quite "simple" problem, but transfer makes it > > difficult to handle as each move has to take care of what it does. > > As for the JIRA tickets, if you feel this is not OK, feel free to > > comment/reopen/create the ones you want. > > But also beware that without a patch, in that very specific situation, > > it's not very likely someone else will spend time to fix it. > > > > > > > > HTH > > Cheers > > > > > > > > 2015-03-16 15:04 GMT+01:00 Markus Karg : > > > > > > > > > Kristian, > > > > > > > > > > > > can you please reopen the item then? I mean, it simply is not fixed, > > > because UTF-8 ZIPs are not a solution: Windows cannot correctly > > > display them, so people on the Windows world will virtually every > > > create > > > > CP850-ZIPs! > > > > > > > > > > > Do you know about any plans to support this, or what is the intended > > > future of this issue? > > > > > > > > > > > > Thanks > > > -Markus > > > > > > > > > > > > -Ursprüngliche Nachricht- > > &
AW: How to configure maven-dependency-plugin's encoding used for unpack?
Kristian, you're kidding, don't you? ;-) what you propose does not work. We are an ISV providing a download for virtually anybody. We cannot tell the world "Hey, you cannot simply use Windows to unzip, but you must first download some other application, because we're using Maven, and it is unable to deal with encodings.". :-( We are NOT packaging a "jar" file. We are packaging a "zip" file. In fact I never mentioned "jar" AFAIK. That one is publicly downloadable. Some team told us they use that "zip" as a dependency and need to unpack it as part of their "prepare-package" phase (they only need some files, not the full zip). At that moment, then file names are turned into garbage. If there is headroom, then let's use that headroom. All we demand is a way to tell in the POM that the plexus "zip unarchiver" used by maven-dependency-plugin for that single artifactItem shall use CP850. :-) I'm talking about http://jira.codehaus.org/browse/MDEP-436 Thank you for your kind help. Regards -Markus -Ursprüngliche Nachricht- Von: kristian.rosenv...@zenior.no [mailto:kristian.rosenv...@zenior.no] Im Auftrag von Kristian Rosenvold Gesendet: Montag, 16. März 2015 21:19 An: Maven Users List Betreff: Re: How to configure maven-dependency-plugin's encoding used for unpack? There is no way to specify unarchiver encoding in the dependency plugin, I have checked. So currently you have to make your users install a less brain dead zip program than the windows compressed folder mechanism. I am also slightly questioning of what you are trying to achieve here; if you are unpacking a "jar" file then it *will* and *should* be UTF8, meaning you cannot use the lobotomized zip support that is included in windows, no matter what. I don't see us fixing /that/ issue, since we'd be violating the jar specification. If your dependency is to an actual "zip" file, we have slightly more headroom, and such a patch might be applied. I am not sure which issue you are referring to, I know there is one for assembly-plugin (http://jira.codehaus.org/browse/MASSEMBLY-748) since the encoding feature should be fixed to work for "unpack" too. Kristian 2015-03-16 15:04 GMT+01:00 Markus Karg : > Kristian, > > can you please reopen the item then? I mean, it simply is not fixed, > because UTF-8 ZIPs are not a solution: Windows cannot correctly > display them, so people on the Windows world will virtually every create > CP850-ZIPs! > > Do you know about any plans to support this, or what is the intended > future of this issue? > > Thanks > -Markus > > -Ursprüngliche Nachricht- > Von: kristian.rosenv...@zenior.no > [mailto:kristian.rosenv...@zenior.no] > Im Auftrag von Kristian Rosenvold > Gesendet: Montag, 16. März 2015 13:46 > An: Maven Users List > Betreff: Re: How to configure maven-dependency-plugin's encoding used > for unpack? > > I did not actually look at the implementation on the dependency > plugin, but it is actually technically impossible to supply the > encoding parameter to > *unzip* via the tag. So until this is fixed, UTF-8 > zip archives are the only ones that will work (with plexus unzip archiver). > > Kristian > > > 2015-03-16 13:05 GMT+01:00 Adrien Rivard : > > > If I'm reading the documentation correctly, > > only apply to filter resources, not to zip them. > > > > In any case I would try using utf-8. > > > > > > On Mon, Mar 16, 2015 at 12:34 PM, Kristian Rosenvold < > > kristian.rosenv...@gmail.com> wrote: > > > > > I dont believe there is support for specifying encoding to unzip. > > > At > > least > > > assembly only provides config to zip. Call it a bug, call it a > > > feature :( > > > > > > Kristian > > > > > > > > > 2015-03-16 12:12 GMT+01:00 Markus Karg : > > > > > > > To preserve German umlauts in file names within a ZIP, we are > using... > > > > > > > > > > > > CP850 > > > > > > > > > > > > ...in the maven-assembly-plugin configuration, which is working well. > > :) > > > > > > > > Next we want to use maven-dependency-plugin to unpack that ZIP. > > > > > > > > How can we configure maven-dependency-plugin:unpack so it will > > > > apply > > > CP850 > > > > when unpacking that ZIP? > > > > > > > > Thanks! > > > > -Markus > > > > > > > > > > > > > > > -- > > Adrien Rivard > > >
AW: How to configure maven-dependency-plugin's encoding used for unpack?
My posting was an example why non-UTF-8-ZIPs are needed to be supported by maven-dependency-plugin. It was definitively not intended as a claim that all Windows editions exactly need CP850. Sorry for the misunderstanding. -Ursprüngliche Nachricht- Von: bmat...@gmail.com [mailto:bmat...@gmail.com] Im Auftrag von Baptiste Mathus Gesendet: Dienstag, 17. März 2015 06:40 An: Maven Users List Betreff: Re: How to configure maven-dependency-plugin's encoding used for unpack? And this is actually not even always true, CP1252 is also often used on Windows (in France for example). Encoding is actually a quite "simple" problem, but transfer makes it difficult to handle as each move has to take care of what it does. As for the JIRA tickets, if you feel this is not OK, feel free to comment/reopen/create the ones you want. But also beware that without a patch, in that very specific situation, it's not very likely someone else will spend time to fix it. HTH Cheers 2015-03-16 15:04 GMT+01:00 Markus Karg : > Kristian, > > can you please reopen the item then? I mean, it simply is not fixed, > because UTF-8 ZIPs are not a solution: Windows cannot correctly > display them, so people on the Windows world will virtually every create > CP850-ZIPs! > > Do you know about any plans to support this, or what is the intended > future of this issue? > > Thanks > -Markus > > -Ursprüngliche Nachricht- > Von: kristian.rosenv...@zenior.no > [mailto:kristian.rosenv...@zenior.no] > Im Auftrag von Kristian Rosenvold > Gesendet: Montag, 16. März 2015 13:46 > An: Maven Users List > Betreff: Re: How to configure maven-dependency-plugin's encoding used > for unpack? > > I did not actually look at the implementation on the dependency > plugin, but it is actually technically impossible to supply the > encoding parameter to > *unzip* via the tag. So until this is fixed, UTF-8 > zip archives are the only ones that will work (with plexus unzip archiver). > > Kristian > > > 2015-03-16 13:05 GMT+01:00 Adrien Rivard : > > > If I'm reading the documentation correctly, > > only apply to filter resources, not to zip them. > > > > In any case I would try using utf-8. > > > > > > On Mon, Mar 16, 2015 at 12:34 PM, Kristian Rosenvold < > > kristian.rosenv...@gmail.com> wrote: > > > > > I dont believe there is support for specifying encoding to unzip. > > > At > > least > > > assembly only provides config to zip. Call it a bug, call it a > > > feature :( > > > > > > Kristian > > > > > > > > > 2015-03-16 12:12 GMT+01:00 Markus Karg : > > > > > > > To preserve German umlauts in file names within a ZIP, we are > using... > > > > > > > > > > > > CP850 > > > > > > > > > > > > ...in the maven-assembly-plugin configuration, which is working well. > > :) > > > > > > > > Next we want to use maven-dependency-plugin to unpack that ZIP. > > > > > > > > How can we configure maven-dependency-plugin:unpack so it will > > > > apply > > > CP850 > > > > when unpacking that ZIP? > > > > > > > > Thanks! > > > > -Markus > > > > > > > > > > > > > > > -- > > Adrien Rivard > > > -- Baptiste MATHUS - http://batmat.net Sauvez un arbre, Mangez un castor ! - To unsubscribe, e-mail: users-unsubscr...@maven.apache.org For additional commands, e-mail: users-h...@maven.apache.org
AW: How to configure maven-dependency-plugin's encoding used for unpack?
(1) "Normal users" (non-comitters) do not have permission to reopen issues so I really beg for your kind help to reopen this issue for me! :-) (2) Despite all the quirks of Windows, the ZIP specification does not say a word about encoding, so it is pretty correct to use any decoding in ZIPs. As a consequence, maven-dependency-plugin MUST either be able to detect the encoding OR MUST have configurable encoding (plexus unarchiver already provides setEncoding BTW). I actually do not understand the discussion about this. I have such ZIPs, these are compliant with the ZIP specification, and maven-dependency-plugin cannot handle it. So instead of complaining about Windows being quirky wouldn't it make more sense to simply provide maven-dependency-plugin the same option that maven-assembly-plugin already has? I mean, that would be straightforward, simple to implement, pragmatic and would actually help us (we are stuck with this!) while discussions about Windows do not. ;-) Maybe there is a trick so one can configure plexus unarchiver's setEncoding via the POM, but we simply don't know how to do that. So if you know that trick, then please share your knowledge with us. We do not insist on a fix for the plugin, but we really need a solution ASAP! :-) Thanks a lot! -Markus -Ursprüngliche Nachricht- Von: kristian.rosenv...@zenior.no [mailto:kristian.rosenv...@zenior.no] Im Auftrag von Kristian Rosenvold Gesendet: Dienstag, 17. März 2015 07:06 An: Maven Users List Betreff: Re: How to configure maven-dependency-plugin's encoding used for unpack? This is really only a question about the borked "zip file" explorer that is default in windows. Quality zip clients always works fine on Windows. The miserable story is documented entirely at http://commons.apache.org/proper/commons-compress/zip.html#Encoding and is an enjoyable read for anyone who wants the full story :) For the assembly plugin I have scheduled http://jira.codehaus.org/browse/MASSEMBLY-748 for the next release, which should be soonish. For the dependency plugin I am still not convinced that this should be supported. Unlike the ZIP specification, the Jar specification is crystal clear on "UTF-8" only, which means we'd be breaking something that is not broken. Kristian 2015-03-17 6:39 GMT+01:00 Baptiste Mathus : > And this is actually not even always true, CP1252 is also often used > on Windows (in France for example). > > Encoding is actually a quite "simple" problem, but transfer makes it > difficult to handle as each move has to take care of what it does. > As for the JIRA tickets, if you feel this is not OK, feel free to > comment/reopen/create the ones you want. > But also beware that without a patch, in that very specific situation, > it's not very likely someone else will spend time to fix it. > > HTH > Cheers > > 2015-03-16 15:04 GMT+01:00 Markus Karg : > > > Kristian, > > > > can you please reopen the item then? I mean, it simply is not fixed, > > because UTF-8 ZIPs are not a solution: Windows cannot correctly > > display them, so people on the Windows world will virtually every > > create > CP850-ZIPs! > > > > Do you know about any plans to support this, or what is the intended > > future of this issue? > > > > Thanks > > -Markus > > > > -Ursprüngliche Nachricht- > > Von: kristian.rosenv...@zenior.no > > [mailto:kristian.rosenv...@zenior.no] > > Im Auftrag von Kristian Rosenvold > > Gesendet: Montag, 16. März 2015 13:46 > > An: Maven Users List > > Betreff: Re: How to configure maven-dependency-plugin's encoding > > used for unpack? > > > > I did not actually look at the implementation on the dependency > > plugin, but it is actually technically impossible to supply the > > encoding > parameter > > to > > *unzip* via the tag. So until this is fixed, UTF-8 > > zip archives are the only ones that will work (with plexus unzip archiver). > > > > Kristian > > > > > > 2015-03-16 13:05 GMT+01:00 Adrien Rivard : > > > > > If I'm reading the documentation correctly, > > > only apply to filter resources, not to zip > > > them. > > > > > > In any case I would try using utf-8. > > > > > > > > > On Mon, Mar 16, 2015 at 12:34 PM, Kristian Rosenvold < > > > kristian.rosenv...@gmail.com> wrote: > > > > > > > I dont believe there is support for specifying encoding to > > > > unzip. At > > > least > > > > assembly only provides config to zip. Call it a bug, call it a > > > > feature :( > > > > &
Re: How to configure maven-dependency-plugin's encoding used for unpack?
This is really only a question about the borked "zip file" explorer that is default in windows. Quality zip clients always works fine on Windows. The miserable story is documented entirely at http://commons.apache.org/proper/commons-compress/zip.html#Encoding and is an enjoyable read for anyone who wants the full story :) For the assembly plugin I have scheduled http://jira.codehaus.org/browse/MASSEMBLY-748 for the next release, which should be soonish. For the dependency plugin I am still not convinced that this should be supported. Unlike the ZIP specification, the Jar specification is crystal clear on "UTF-8" only, which means we'd be breaking something that is not broken. Kristian 2015-03-17 6:39 GMT+01:00 Baptiste Mathus : > And this is actually not even always true, CP1252 is also often used on > Windows (in France for example). > > Encoding is actually a quite "simple" problem, but transfer makes it > difficult to handle as each move has to take care of what it does. > As for the JIRA tickets, if you feel this is not OK, feel free to > comment/reopen/create the ones you want. > But also beware that without a patch, in that very specific situation, it's > not very likely someone else will spend time to fix it. > > HTH > Cheers > > 2015-03-16 15:04 GMT+01:00 Markus Karg : > > > Kristian, > > > > can you please reopen the item then? I mean, it simply is not fixed, > > because UTF-8 ZIPs are not a solution: Windows cannot correctly display > > them, so people on the Windows world will virtually every create > CP850-ZIPs! > > > > Do you know about any plans to support this, or what is the intended > > future of this issue? > > > > Thanks > > -Markus > > > > -Ursprüngliche Nachricht- > > Von: kristian.rosenv...@zenior.no [mailto:kristian.rosenv...@zenior.no] > > Im Auftrag von Kristian Rosenvold > > Gesendet: Montag, 16. März 2015 13:46 > > An: Maven Users List > > Betreff: Re: How to configure maven-dependency-plugin's encoding used for > > unpack? > > > > I did not actually look at the implementation on the dependency plugin, > > but it is actually technically impossible to supply the encoding > parameter > > to > > *unzip* via the tag. So until this is fixed, UTF-8 zip > > archives are the only ones that will work (with plexus unzip archiver). > > > > Kristian > > > > > > 2015-03-16 13:05 GMT+01:00 Adrien Rivard : > > > > > If I'm reading the documentation correctly, > > > only apply to filter resources, not to zip them. > > > > > > In any case I would try using utf-8. > > > > > > > > > On Mon, Mar 16, 2015 at 12:34 PM, Kristian Rosenvold < > > > kristian.rosenv...@gmail.com> wrote: > > > > > > > I dont believe there is support for specifying encoding to unzip. At > > > least > > > > assembly only provides config to zip. Call it a bug, call it a > > > > feature :( > > > > > > > > Kristian > > > > > > > > > > > > 2015-03-16 12:12 GMT+01:00 Markus Karg : > > > > > > > > > To preserve German umlauts in file names within a ZIP, we are > > using... > > > > > > > > > > > > > > > CP850 > > > > > > > > > > > > > > > ...in the maven-assembly-plugin configuration, which is working > well. > > > :) > > > > > > > > > > Next we want to use maven-dependency-plugin to unpack that ZIP. > > > > > > > > > > How can we configure maven-dependency-plugin:unpack so it will > > > > > apply > > > > CP850 > > > > > when unpacking that ZIP? > > > > > > > > > > Thanks! > > > > > -Markus > > > > > > > > > > > > > > > > > > > > > -- > > > Adrien Rivard > > > > > > > > > -- > Baptiste MATHUS - http://batmat.net > Sauvez un arbre, > Mangez un castor ! >
Re: How to configure maven-dependency-plugin's encoding used for unpack?
And this is actually not even always true, CP1252 is also often used on Windows (in France for example). Encoding is actually a quite "simple" problem, but transfer makes it difficult to handle as each move has to take care of what it does. As for the JIRA tickets, if you feel this is not OK, feel free to comment/reopen/create the ones you want. But also beware that without a patch, in that very specific situation, it's not very likely someone else will spend time to fix it. HTH Cheers 2015-03-16 15:04 GMT+01:00 Markus Karg : > Kristian, > > can you please reopen the item then? I mean, it simply is not fixed, > because UTF-8 ZIPs are not a solution: Windows cannot correctly display > them, so people on the Windows world will virtually every create CP850-ZIPs! > > Do you know about any plans to support this, or what is the intended > future of this issue? > > Thanks > -Markus > > -Ursprüngliche Nachricht- > Von: kristian.rosenv...@zenior.no [mailto:kristian.rosenv...@zenior.no] > Im Auftrag von Kristian Rosenvold > Gesendet: Montag, 16. März 2015 13:46 > An: Maven Users List > Betreff: Re: How to configure maven-dependency-plugin's encoding used for > unpack? > > I did not actually look at the implementation on the dependency plugin, > but it is actually technically impossible to supply the encoding parameter > to > *unzip* via the tag. So until this is fixed, UTF-8 zip > archives are the only ones that will work (with plexus unzip archiver). > > Kristian > > > 2015-03-16 13:05 GMT+01:00 Adrien Rivard : > > > If I'm reading the documentation correctly, > > only apply to filter resources, not to zip them. > > > > In any case I would try using utf-8. > > > > > > On Mon, Mar 16, 2015 at 12:34 PM, Kristian Rosenvold < > > kristian.rosenv...@gmail.com> wrote: > > > > > I dont believe there is support for specifying encoding to unzip. At > > least > > > assembly only provides config to zip. Call it a bug, call it a > > > feature :( > > > > > > Kristian > > > > > > > > > 2015-03-16 12:12 GMT+01:00 Markus Karg : > > > > > > > To preserve German umlauts in file names within a ZIP, we are > using... > > > > > > > > > > > > CP850 > > > > > > > > > > > > ...in the maven-assembly-plugin configuration, which is working well. > > :) > > > > > > > > Next we want to use maven-dependency-plugin to unpack that ZIP. > > > > > > > > How can we configure maven-dependency-plugin:unpack so it will > > > > apply > > > CP850 > > > > when unpacking that ZIP? > > > > > > > > Thanks! > > > > -Markus > > > > > > > > > > > > > > > -- > > Adrien Rivard > > > -- Baptiste MATHUS - http://batmat.net Sauvez un arbre, Mangez un castor !
Re: How to configure maven-dependency-plugin's encoding used for unpack?
There is no way to specify unarchiver encoding in the dependency plugin, I have checked. So currently you have to make your users install a less brain dead zip program than the windows compressed folder mechanism. I am also slightly questioning of what you are trying to achieve here; if you are unpacking a "jar" file then it *will* and *should* be UTF8, meaning you cannot use the lobotomized zip support that is included in windows, no matter what. I don't see us fixing /that/ issue, since we'd be violating the jar specification. If your dependency is to an actual "zip" file, we have slightly more headroom, and such a patch might be applied. I am not sure which issue you are referring to, I know there is one for assembly-plugin (http://jira.codehaus.org/browse/MASSEMBLY-748) since the encoding feature should be fixed to work for "unpack" too. Kristian 2015-03-16 15:04 GMT+01:00 Markus Karg : > Kristian, > > can you please reopen the item then? I mean, it simply is not fixed, > because UTF-8 ZIPs are not a solution: Windows cannot correctly display > them, so people on the Windows world will virtually every create CP850-ZIPs! > > Do you know about any plans to support this, or what is the intended > future of this issue? > > Thanks > -Markus > > -Ursprüngliche Nachricht- > Von: kristian.rosenv...@zenior.no [mailto:kristian.rosenv...@zenior.no] > Im Auftrag von Kristian Rosenvold > Gesendet: Montag, 16. März 2015 13:46 > An: Maven Users List > Betreff: Re: How to configure maven-dependency-plugin's encoding used for > unpack? > > I did not actually look at the implementation on the dependency plugin, > but it is actually technically impossible to supply the encoding parameter > to > *unzip* via the tag. So until this is fixed, UTF-8 zip > archives are the only ones that will work (with plexus unzip archiver). > > Kristian > > > 2015-03-16 13:05 GMT+01:00 Adrien Rivard : > > > If I'm reading the documentation correctly, > > only apply to filter resources, not to zip them. > > > > In any case I would try using utf-8. > > > > > > On Mon, Mar 16, 2015 at 12:34 PM, Kristian Rosenvold < > > kristian.rosenv...@gmail.com> wrote: > > > > > I dont believe there is support for specifying encoding to unzip. At > > least > > > assembly only provides config to zip. Call it a bug, call it a > > > feature :( > > > > > > Kristian > > > > > > > > > 2015-03-16 12:12 GMT+01:00 Markus Karg : > > > > > > > To preserve German umlauts in file names within a ZIP, we are > using... > > > > > > > > > > > > CP850 > > > > > > > > > > > > ...in the maven-assembly-plugin configuration, which is working well. > > :) > > > > > > > > Next we want to use maven-dependency-plugin to unpack that ZIP. > > > > > > > > How can we configure maven-dependency-plugin:unpack so it will > > > > apply > > > CP850 > > > > when unpacking that ZIP? > > > > > > > > Thanks! > > > > -Markus > > > > > > > > > > > > > > > -- > > Adrien Rivard > > >
Re: How to configure maven-dependency-plugin's encoding used for unpack?
I don't really see that the dependency plugin has any support for encoding in pack or unpack. Where did you see that ? Kristian 2015-03-16 15:04 GMT+01:00 Markus Karg : > Kristian, > > can you please reopen the item then? I mean, it simply is not fixed, > because UTF-8 ZIPs are not a solution: Windows cannot correctly display > them, so people on the Windows world will virtually every create CP850-ZIPs! > > Do you know about any plans to support this, or what is the intended > future of this issue? > > Thanks > -Markus > > -Ursprüngliche Nachricht- > Von: kristian.rosenv...@zenior.no [mailto:kristian.rosenv...@zenior.no] > Im Auftrag von Kristian Rosenvold > Gesendet: Montag, 16. März 2015 13:46 > An: Maven Users List > Betreff: Re: How to configure maven-dependency-plugin's encoding used for > unpack? > > I did not actually look at the implementation on the dependency plugin, > but it is actually technically impossible to supply the encoding parameter > to > *unzip* via the tag. So until this is fixed, UTF-8 zip > archives are the only ones that will work (with plexus unzip archiver). > > Kristian > > > 2015-03-16 13:05 GMT+01:00 Adrien Rivard : > > > If I'm reading the documentation correctly, > > only apply to filter resources, not to zip them. > > > > In any case I would try using utf-8. > > > > > > On Mon, Mar 16, 2015 at 12:34 PM, Kristian Rosenvold < > > kristian.rosenv...@gmail.com> wrote: > > > > > I dont believe there is support for specifying encoding to unzip. At > > least > > > assembly only provides config to zip. Call it a bug, call it a > > > feature :( > > > > > > Kristian > > > > > > > > > 2015-03-16 12:12 GMT+01:00 Markus Karg : > > > > > > > To preserve German umlauts in file names within a ZIP, we are > using... > > > > > > > > > > > > CP850 > > > > > > > > > > > > ...in the maven-assembly-plugin configuration, which is working well. > > :) > > > > > > > > Next we want to use maven-dependency-plugin to unpack that ZIP. > > > > > > > > How can we configure maven-dependency-plugin:unpack so it will > > > > apply > > > CP850 > > > > when unpacking that ZIP? > > > > > > > > Thanks! > > > > -Markus > > > > > > > > > > > > > > > -- > > Adrien Rivard > > >
AW: How to configure maven-dependency-plugin's encoding used for unpack?
Kristian, can you please reopen the item then? I mean, it simply is not fixed, because UTF-8 ZIPs are not a solution: Windows cannot correctly display them, so people on the Windows world will virtually every create CP850-ZIPs! Do you know about any plans to support this, or what is the intended future of this issue? Thanks -Markus -Ursprüngliche Nachricht- Von: kristian.rosenv...@zenior.no [mailto:kristian.rosenv...@zenior.no] Im Auftrag von Kristian Rosenvold Gesendet: Montag, 16. März 2015 13:46 An: Maven Users List Betreff: Re: How to configure maven-dependency-plugin's encoding used for unpack? I did not actually look at the implementation on the dependency plugin, but it is actually technically impossible to supply the encoding parameter to *unzip* via the tag. So until this is fixed, UTF-8 zip archives are the only ones that will work (with plexus unzip archiver). Kristian 2015-03-16 13:05 GMT+01:00 Adrien Rivard : > If I'm reading the documentation correctly, > only apply to filter resources, not to zip them. > > In any case I would try using utf-8. > > > On Mon, Mar 16, 2015 at 12:34 PM, Kristian Rosenvold < > kristian.rosenv...@gmail.com> wrote: > > > I dont believe there is support for specifying encoding to unzip. At > least > > assembly only provides config to zip. Call it a bug, call it a > > feature :( > > > > Kristian > > > > > > 2015-03-16 12:12 GMT+01:00 Markus Karg : > > > > > To preserve German umlauts in file names within a ZIP, we are using... > > > > > > > > > CP850 > > > > > > > > > ...in the maven-assembly-plugin configuration, which is working well. > :) > > > > > > Next we want to use maven-dependency-plugin to unpack that ZIP. > > > > > > How can we configure maven-dependency-plugin:unpack so it will > > > apply > > CP850 > > > when unpacking that ZIP? > > > > > > Thanks! > > > -Markus > > > > > > > > > -- > Adrien Rivard >
Re: How to configure maven-dependency-plugin's encoding used for unpack?
I did not actually look at the implementation on the dependency plugin, but it is actually technically impossible to supply the encoding parameter to *unzip* via the tag. So until this is fixed, UTF-8 zip archives are the only ones that will work (with plexus unzip archiver). Kristian 2015-03-16 13:05 GMT+01:00 Adrien Rivard : > If I'm reading the documentation correctly, > only apply to filter resources, not to zip them. > > In any case I would try using utf-8. > > > On Mon, Mar 16, 2015 at 12:34 PM, Kristian Rosenvold < > kristian.rosenv...@gmail.com> wrote: > > > I dont believe there is support for specifying encoding to unzip. At > least > > assembly only provides config to zip. Call it a bug, call it a feature :( > > > > Kristian > > > > > > 2015-03-16 12:12 GMT+01:00 Markus Karg : > > > > > To preserve German umlauts in file names within a ZIP, we are using... > > > > > > > > > CP850 > > > > > > > > > ...in the maven-assembly-plugin configuration, which is working well. > :) > > > > > > Next we want to use maven-dependency-plugin to unpack that ZIP. > > > > > > How can we configure maven-dependency-plugin:unpack so it will apply > > CP850 > > > when unpacking that ZIP? > > > > > > Thanks! > > > -Markus > > > > > > > > > -- > Adrien Rivard >
Re: How to configure maven-dependency-plugin's encoding used for unpack?
If I'm reading the documentation correctly, only apply to filter resources, not to zip them. In any case I would try using utf-8. On Mon, Mar 16, 2015 at 12:34 PM, Kristian Rosenvold < kristian.rosenv...@gmail.com> wrote: > I dont believe there is support for specifying encoding to unzip. At least > assembly only provides config to zip. Call it a bug, call it a feature :( > > Kristian > > > 2015-03-16 12:12 GMT+01:00 Markus Karg : > > > To preserve German umlauts in file names within a ZIP, we are using... > > > > > > CP850 > > > > > > ...in the maven-assembly-plugin configuration, which is working well. :) > > > > Next we want to use maven-dependency-plugin to unpack that ZIP. > > > > How can we configure maven-dependency-plugin:unpack so it will apply > CP850 > > when unpacking that ZIP? > > > > Thanks! > > -Markus > > > -- Adrien Rivard
Re: How to configure maven-dependency-plugin's encoding used for unpack?
I dont believe there is support for specifying encoding to unzip. At least assembly only provides config to zip. Call it a bug, call it a feature :( Kristian 2015-03-16 12:12 GMT+01:00 Markus Karg : > To preserve German umlauts in file names within a ZIP, we are using... > > > CP850 > > > ...in the maven-assembly-plugin configuration, which is working well. :) > > Next we want to use maven-dependency-plugin to unpack that ZIP. > > How can we configure maven-dependency-plugin:unpack so it will apply CP850 > when unpacking that ZIP? > > Thanks! > -Markus >
How to configure maven-dependency-plugin's encoding used for unpack?
To preserve German umlauts in file names within a ZIP, we are using... CP850 ...in the maven-assembly-plugin configuration, which is working well. :) Next we want to use maven-dependency-plugin to unpack that ZIP. How can we configure maven-dependency-plugin:unpack so it will apply CP850 when unpacking that ZIP? Thanks! -Markus
RE: How to configure maven
Sorry - the bad repo is in the rampart pom.xml file. I must have fat fingered the text search first time around. -Original Message- From: Walters, Jay [mailto:walte...@hmc.harvard.edu] Sent: Wednesday, January 22, 2014 11:49 AM To: 'Maven Users List' Subject: RE: How to configure maven Sorry, this is probably also relevant (and also does not look right). Is this a mirror gone bad? How do I configure where maven looks for the repository for apache files (and where is the right place). Downloading: http://shibboleth.internet2.edu/downloads/maven2/org/apache/axis2/a xis2-kernel/1.6.2/axis2-kernel-1.6.2.pom [WARNING] Checksum validation failed, expected http://shibboleth.internet2.edu/downloads/maven2/or g/apache/axis2/mex/1.6.2/mex-1.6.2-impl.jar -Original Message- From: Walters, Jay [mailto:walte...@hmc.harvard.edu] Sent: Wednesday, January 22, 2014 11:47 AM To: 'users@maven.apache.org' Subject: How to configure maven Sorry for asking such a easy question, but googling apache maven anything doesn't get to the answer too easily. I have a previously working local repository in my home\.m2 directory. I am on windows and JDK 1.6.0_21. I have previously used this with maven 2.2.1 and 3.0.4. I also downloaded a fresh maven 3.1.1 which has the same problem. I have no custom settings.xml file, I just have what comes in the zipfile downloads from the apache website. Today, I'm trying to build apache rampart 1.6.2 from source (downloaded yesterday) which wants to pull in apache axis jars/poms and also a file apache/8/pom.xml from an apache repository. Rather than fetching in the files I need I get the attached internet2 html page which breaks the build. Is there a way to configure this so apache stuff builds properly? - To unsubscribe, e-mail: users-unsubscr...@maven.apache.org For additional commands, e-mail: users-h...@maven.apache.org - To unsubscribe, e-mail: users-unsubscr...@maven.apache.org For additional commands, e-mail: users-h...@maven.apache.org
RE: How to configure maven
Sorry, this is probably also relevant (and also does not look right). Is this a mirror gone bad? How do I configure where maven looks for the repository for apache files (and where is the right place). Downloading: http://shibboleth.internet2.edu/downloads/maven2/org/apache/axis2/a xis2-kernel/1.6.2/axis2-kernel-1.6.2.pom [WARNING] Checksum validation failed, expected http://shibboleth.internet2.edu/downloads/maven2/or g/apache/axis2/mex/1.6.2/mex-1.6.2-impl.jar -Original Message- From: Walters, Jay [mailto:walte...@hmc.harvard.edu] Sent: Wednesday, January 22, 2014 11:47 AM To: 'users@maven.apache.org' Subject: How to configure maven Sorry for asking such a easy question, but googling apache maven anything doesn't get to the answer too easily. I have a previously working local repository in my home\.m2 directory. I am on windows and JDK 1.6.0_21. I have previously used this with maven 2.2.1 and 3.0.4. I also downloaded a fresh maven 3.1.1 which has the same problem. I have no custom settings.xml file, I just have what comes in the zipfile downloads from the apache website. Today, I'm trying to build apache rampart 1.6.2 from source (downloaded yesterday) which wants to pull in apache axis jars/poms and also a file apache/8/pom.xml from an apache repository. Rather than fetching in the files I need I get the attached internet2 html page which breaks the build. Is there a way to configure this so apache stuff builds properly? - To unsubscribe, e-mail: users-unsubscr...@maven.apache.org For additional commands, e-mail: users-h...@maven.apache.org
How to configure maven
Sorry for asking such a easy question, but googling apache maven anything doesn't get to the answer too easily. I have a previously working local repository in my home\.m2 directory. I am on windows and JDK 1.6.0_21. I have previously used this with maven 2.2.1 and 3.0.4. I also downloaded a fresh maven 3.1.1 which has the same problem. I have no custom settings.xml file, I just have what comes in the zipfile downloads from the apache website. Today, I'm trying to build apache rampart 1.6.2 from source (downloaded yesterday) which wants to pull in apache axis jars/poms and also a file apache/8/pom.xml from an apache repository. Rather than fetching in the files I need I get the attached internet2 html page which breaks the build. Is there a way to configure this so apache stuff builds properly? - To unsubscribe, e-mail: users-unsubscr...@maven.apache.org For additional commands, e-mail: users-h...@maven.apache.org
Re: How to configure a profile to NOT upload build aritfact to a repository?
> deploy plugin has a skip option [1] > So add this option in a profile ? > I'd say the only use case for the skip param would be if you have some Maven project the should NEVER upload it's artifact. Then you could configure this so that it will not be uploaded even if "mvn deploy" is executed. But it should then not be in a profile. But if you have a project that normally should upload it's artifact and you have some scenario where it shouldn't (like one of your CI build jobs), then you should just do "mvn install" in that case. A profile using skip brings no advantage but is just a step away from Maven conventions IMO. /Anders > > HTH, > -- > Olivier > [1] http://maven.apache.org/plugins/maven-deploy-plugin/faq.html#skip > > 2012/11/3 Anders Hammar : > > As Berrie explained, the correct solution here is to just do a "mvn > > install" build in this case. Starting to use profiles is not the > solution. > > It (almost) never is. > > > > /Anders > > > > On Sat, Nov 3, 2012 at 10:22 AM, Barrie Treloar > wrote: > > > >> On Sat, Nov 3, 2012 at 2:35 AM, > wrote: > >> > >> > Greetings, > >> > > >> > I have a project that builds and then artifacts are automatically > >> uploaded > >> > to our Nexus repository. I have a special case where I need the code > to > >> > build but I don't want the artifacts to be uploaded. > >> > > >> > I set up a profile for the special case. However it is still trying > to > >> > upload because it is inheriting the > attributes > >> > from the parent. > >> > > >> > How can I tell this profile to NOT upload to the Nexus repo? I tried > >> > putting dummy data under a tag inside the > >> profile > >> > but that is causing the builds to fail. > >> > > >> > Thanks, > >> > > >> > Carlos > >> > > >> > >> What command are you using? > >> > >> mvn install > >> does everything locally, does not upload anything. > >> > >> mvn deploy > >> does everything that "mvn install" does, plus uploads to > >> distributionManagement. > >> > >> mvn release:perform > >> Automated some of the steps that you should be doing if you were to > >> manually run "mvn deploy". > >> > > > > -- > Olivier Lamy > Talend: http://coders.talend.com > http://twitter.com/olamy | http://linkedin.com/in/olamy > > - > To unsubscribe, e-mail: users-unsubscr...@maven.apache.org > For additional commands, e-mail: users-h...@maven.apache.org > >
Re: How to configure a profile to NOT upload build aritfact to a repository?
deploy plugin has a skip option [1] So add this option in a profile ? HTH, -- Olivier [1] http://maven.apache.org/plugins/maven-deploy-plugin/faq.html#skip 2012/11/3 Anders Hammar : > As Berrie explained, the correct solution here is to just do a "mvn > install" build in this case. Starting to use profiles is not the solution. > It (almost) never is. > > /Anders > > On Sat, Nov 3, 2012 at 10:22 AM, Barrie Treloar wrote: > >> On Sat, Nov 3, 2012 at 2:35 AM, wrote: >> >> > Greetings, >> > >> > I have a project that builds and then artifacts are automatically >> uploaded >> > to our Nexus repository. I have a special case where I need the code to >> > build but I don't want the artifacts to be uploaded. >> > >> > I set up a profile for the special case. However it is still trying to >> > upload because it is inheriting the attributes >> > from the parent. >> > >> > How can I tell this profile to NOT upload to the Nexus repo? I tried >> > putting dummy data under a tag inside the >> profile >> > but that is causing the builds to fail. >> > >> > Thanks, >> > >> > Carlos >> > >> >> What command are you using? >> >> mvn install >> does everything locally, does not upload anything. >> >> mvn deploy >> does everything that "mvn install" does, plus uploads to >> distributionManagement. >> >> mvn release:perform >> Automated some of the steps that you should be doing if you were to >> manually run "mvn deploy". >> -- Olivier Lamy Talend: http://coders.talend.com http://twitter.com/olamy | http://linkedin.com/in/olamy - To unsubscribe, e-mail: users-unsubscr...@maven.apache.org For additional commands, e-mail: users-h...@maven.apache.org
Re: How to configure a profile to NOT upload build aritfact to a repository?
As Berrie explained, the correct solution here is to just do a "mvn install" build in this case. Starting to use profiles is not the solution. It (almost) never is. /Anders On Sat, Nov 3, 2012 at 10:22 AM, Barrie Treloar wrote: > On Sat, Nov 3, 2012 at 2:35 AM, wrote: > > > Greetings, > > > > I have a project that builds and then artifacts are automatically > uploaded > > to our Nexus repository. I have a special case where I need the code to > > build but I don't want the artifacts to be uploaded. > > > > I set up a profile for the special case. However it is still trying to > > upload because it is inheriting the attributes > > from the parent. > > > > How can I tell this profile to NOT upload to the Nexus repo? I tried > > putting dummy data under a tag inside the > profile > > but that is causing the builds to fail. > > > > Thanks, > > > > Carlos > > > > What command are you using? > > mvn install > does everything locally, does not upload anything. > > mvn deploy > does everything that "mvn install" does, plus uploads to > distributionManagement. > > mvn release:perform > Automated some of the steps that you should be doing if you were to > manually run "mvn deploy". >
Re: How to configure a profile to NOT upload build aritfact to a repository?
On Sat, Nov 3, 2012 at 2:35 AM, wrote: > Greetings, > > I have a project that builds and then artifacts are automatically uploaded > to our Nexus repository. I have a special case where I need the code to > build but I don't want the artifacts to be uploaded. > > I set up a profile for the special case. However it is still trying to > upload because it is inheriting the attributes > from the parent. > > How can I tell this profile to NOT upload to the Nexus repo? I tried > putting dummy data under a tag inside the profile > but that is causing the builds to fail. > > Thanks, > > Carlos > What command are you using? mvn install does everything locally, does not upload anything. mvn deploy does everything that "mvn install" does, plus uploads to distributionManagement. mvn release:perform Automated some of the steps that you should be doing if you were to manually run "mvn deploy".
How to configure a profile to NOT upload build aritfact to a repository?
Greetings, I have a project that builds and then artifacts are automatically uploaded to our Nexus repository. I have a special case where I need the code to build but I don't want the artifacts to be uploaded. I set up a profile for the special case. However it is still trying to upload because it is inheriting the attributes from the parent. How can I tell this profile to NOT upload to the Nexus repo? I tried putting dummy data under a tag inside the profile but that is causing the builds to fail. Thanks, Carlos This message is for the designated recipient only and may contain privileged, proprietary, or otherwise private information. If you have received it in error, please notify the sender immediately and delete the original. Any other use of the e-mail by you is prohibited. Where allowed by local law, electronic communications with Accenture and its affiliates, including e-mail and instant messaging (including content), may be scanned by our systems for the purposes of information security and assessment of internal compliance with Accenture policy. . __ www.accenture.com
Re: how to configure maven plugins using compony repository with nexus
Am 13.01.2012 07:12 schrieb "chandrasheker" : > > Hi, > > How to configure maven plugins to company repository with nexus ui.i > download the jar from internal company repository It's described in the manual of Sonatype Nexus. Please rtfm. Besides, the exception stack trace you gave is mostly useless, as it does not contain the dependency which could mot be resolved. Regards Ansgar while run application but > it gives the following excepiton > org.apache.maven.lifecycle.LifecycleExecutionException: > at > org.apache.maven.lifecycle.internal.LifecycleDependencyResolver.getDependencies(LifecycleDependencyResolver.java:196) >at > org.apache.maven.lifecycle.internal.LifecycleDependencyResolver.resolveProjectDependencies(LifecycleDependencyResolver.java:108) >at > org.apache.maven.lifecycle.internal.MojoExecutor.ensureDependenciesAreResolved(MojoExecutor.java:258) >at > org.apache.maven.lifecycle.internal.MojoExecutor.execute(MojoExecutor.java:201) >at > org.apache.maven.lifecycle.internal.MojoExecutor.execute(MojoExecutor.java:153) >at > org.apache.maven.lifecycle.internal.MojoExecutor.execute(MojoExecutor.java:145) >at > org.apache.maven.lifecycle.internal.LifecycleModuleBuilder.buildProject(LifecycleModuleBuilder.java:84) >at > org.apache.maven.lifecycle.internal.LifecycleModuleBuilder.buildProject(LifecycleModuleBuilder.java:59) >at > org.apache.maven.lifecycle.internal.LifecycleStarter.singleThreadedBuild(LifecycleStarter.java:183) >at > org.apache.maven.lifecycle.internal.LifecycleStarter.execute(LifecycleStarter.java:161) >at org.apache.maven.DefaultMaven.doExecute(DefaultMaven.java:319) >at org.apache.maven.DefaultMaven.execute(DefaultMaven.java:156) >at org.apache.maven.cli.MavenCli.execute(MavenCli.java:537) >at org.apache.maven.cli.MavenCli.doMain(MavenCli.java:196) >at org.apache.maven.cli.MavenCli.main(MavenCli.java:141) >at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) >at > sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) >at > sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) >at java.lang.reflect.Method.invoke(Method.java:597) >at > org.codehaus.plexus.classworlds.launcher.Launcher.launchEnhanced(Launcher.java:290) >at > org.codehaus.plexus.classworlds.launcher.Launcher.launch(Launcher.java:230) >at > org.codehaus.plexus.classworlds.launcher.Launcher.mainWithExitCode(Launcher.java:409) >at > org.codehaus.plexus.classworlds.launcher.Launcher.main(Launcher.java:352) > Caused by: org.apache.maven.project.DependencyResolutionException: > > Thanks & Regards, > chandra > > -- > View this message in context: http://maven.40175.n5.nabble.com/how-to-configure-maven-plugins-using-compony-repository-with-nexus-tp5141812p5141812.html > Sent from the Maven - Users mailing list archive at Nabble.com. > > - > To unsubscribe, e-mail: users-unsubscr...@maven.apache.org > For additional commands, e-mail: users-h...@maven.apache.org >
how to configure maven plugins using compony repository with nexus
Hi, How to configure maven plugins to company repository with nexus ui.i download the jar from internal company repository while run application but it gives the following excepiton org.apache.maven.lifecycle.LifecycleExecutionException: at org.apache.maven.lifecycle.internal.LifecycleDependencyResolver.getDependencies(LifecycleDependencyResolver.java:196) at org.apache.maven.lifecycle.internal.LifecycleDependencyResolver.resolveProjectDependencies(LifecycleDependencyResolver.java:108) at org.apache.maven.lifecycle.internal.MojoExecutor.ensureDependenciesAreResolved(MojoExecutor.java:258) at org.apache.maven.lifecycle.internal.MojoExecutor.execute(MojoExecutor.java:201) at org.apache.maven.lifecycle.internal.MojoExecutor.execute(MojoExecutor.java:153) at org.apache.maven.lifecycle.internal.MojoExecutor.execute(MojoExecutor.java:145) at org.apache.maven.lifecycle.internal.LifecycleModuleBuilder.buildProject(LifecycleModuleBuilder.java:84) at org.apache.maven.lifecycle.internal.LifecycleModuleBuilder.buildProject(LifecycleModuleBuilder.java:59) at org.apache.maven.lifecycle.internal.LifecycleStarter.singleThreadedBuild(LifecycleStarter.java:183) at org.apache.maven.lifecycle.internal.LifecycleStarter.execute(LifecycleStarter.java:161) at org.apache.maven.DefaultMaven.doExecute(DefaultMaven.java:319) at org.apache.maven.DefaultMaven.execute(DefaultMaven.java:156) at org.apache.maven.cli.MavenCli.execute(MavenCli.java:537) at org.apache.maven.cli.MavenCli.doMain(MavenCli.java:196) at org.apache.maven.cli.MavenCli.main(MavenCli.java:141) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.codehaus.plexus.classworlds.launcher.Launcher.launchEnhanced(Launcher.java:290) at org.codehaus.plexus.classworlds.launcher.Launcher.launch(Launcher.java:230) at org.codehaus.plexus.classworlds.launcher.Launcher.mainWithExitCode(Launcher.java:409) at org.codehaus.plexus.classworlds.launcher.Launcher.main(Launcher.java:352) Caused by: org.apache.maven.project.DependencyResolutionException: Thanks & Regards, chandra -- View this message in context: http://maven.40175.n5.nabble.com/how-to-configure-maven-plugins-using-compony-repository-with-nexus-tp5141812p5141812.html Sent from the Maven - Users mailing list archive at Nabble.com. - To unsubscribe, e-mail: users-unsubscr...@maven.apache.org For additional commands, e-mail: users-h...@maven.apache.org
Re: How to configure properties-maven-plugin to report built in properties/variables
You can achieve this very easily by using the maven-ant-plugin combined
with the echoproperties Ant task
(http://ant.apache.org/manual/Tasks/echoproperties.html).
Cheers,
Guillaume
Le 3/01/2012 17:22, David Hoffer a écrit :
How can I get project variables/properties exported to property file?
I'm using properties-maven-plugin and it's good but it only reports
things I have explicitly created as properties in my project. I need
to also get a report on things that maven already defined such as:
scm:svn:https://...
scm:svn:https://...
https://...
...
To get these values reported using this plugin I have to add this to my project:
${project.scm.connection}
${project.scm.developerConnection}
${project.scm.url}
This is tedious and error prone. Is there a way to report this
without adding variables as properties manually?
-
To unsubscribe, e-mail: users-unsubscr...@maven.apache.org
For additional commands, e-mail: users-h...@maven.apache.org
-
To unsubscribe, e-mail: users-unsubscr...@maven.apache.org
For additional commands, e-mail: users-h...@maven.apache.org
Re: How to configure properties-maven-plugin to report built in properties/variables
Am 03.01.2012 17:22 schrieb "David Hoffer" :
>
> How can I get project variables/properties exported to property file?
What are you going to do with these properties files?
Depending on your use case, there might be quite easy solutions for you,
without putting a lot of properties into files.
A
>
> I'm using properties-maven-plugin and it's good but it only reports
> things I have explicitly created as properties in my project. I need
> to also get a report on things that maven already defined such as:
>
>
> scm:svn:https://...
> scm:svn:https://...
> https://...
>
> ...
>
>
> To get these values reported using this plugin I have to add this to my
project:
>
>
>
${project.scm.connection}
>
${project.scm.developerConnection}
>${project.scm.url}
>
>
> This is tedious and error prone. Is there a way to report this
> without adding variables as properties manually?
>
> -
> To unsubscribe, e-mail: users-unsubscr...@maven.apache.org
> For additional commands, e-mail: users-h...@maven.apache.org
>
Re: How to configure properties-maven-plugin to report built in properties/variables
Hi,
if you create a site and using the project-info-report-plugin will show
a page with the information about the source repository
which contains exactly the information about the area...
http://maven.apache.org/plugins/maven-project-info-reports-plugin/
Example of this:
http://maven.apache.org/plugins/maven-project-info-reports-plugin/source-repository.html
So no need to put the scm connections into properties which will not
work...in particular if you are using the release plugin of Maven...
So simply write the information plain into the scm are no using of
properties...
scm:svn:https://...
scm:svn:https://...
https://...
...
To get these values reported using this plugin I have to add this to my project:
${project.scm.connection}
${project.scm.developerConnection}
${project.scm.url}
This is tedious and error prone. Is there a way to report this
without adding variables as properties manually?
-
To unsubscribe, e-mail: users-unsubscr...@maven.apache.org
For additional commands, e-mail: users-h...@maven.apache.org
--
SoftwareEntwicklung Beratung SchulungTel.: +49 (0) 2405 / 415 893
Dipl.Ing.(FH) Karl Heinz MarbaiseICQ#: 135949029
Hauptstrasse 177 USt.IdNr: DE191347579
52146 Würselen http://www.soebes.de
-
To unsubscribe, e-mail: users-unsubscr...@maven.apache.org
For additional commands, e-mail: users-h...@maven.apache.org
How to configure properties-maven-plugin to report built in properties/variables
How can I get project variables/properties exported to property file?
I'm using properties-maven-plugin and it's good but it only reports
things I have explicitly created as properties in my project. I need
to also get a report on things that maven already defined such as:
scm:svn:https://...
scm:svn:https://...
https://...
...
To get these values reported using this plugin I have to add this to my project:
${project.scm.connection}
${project.scm.developerConnection}
${project.scm.url}
This is tedious and error prone. Is there a way to report this
without adding variables as properties manually?
-
To unsubscribe, e-mail: users-unsubscr...@maven.apache.org
For additional commands, e-mail: users-h...@maven.apache.org
Re: How to configure plugin with default values
On Thu, Aug 18, 2011 at 10:40:23AM -0600, David Hoffer wrote:
> I'm creating a plugin and having trouble getting the container
> (plexus) to configure initial values. I've started with the
> dependency plugin as a basis and see that somehow mojo parameters get
> set with default values...I assume this is happening by the container
> but what's the secret to making this work? I've added some new mojo
http://maven.apache.org/guides/plugin/guide-java-plugin-development.html
You add a 'default-value="something"' to the @parameter annotation,
and something (I'm not sure it's plexus, at least not directly) will
evaluate the string value and attempt to convert it to something
compatible with the type of the parameter field, if no value was
configured externally.
The bit that's not well documented is that you can pluck property
values such as ${project.build.directory} out of the model by writing
them in the default-value string. Apparently this is the proper way
to discover model values and the like, though I've found nothing
authoritative yet that actually says "do it this way".
> parameters following the same convention and they are null at runtime
> (running unit test). Is there some documentation on the
> creating/wiring of plugin mojos to the container?
Some. Not enough. When I figure out some of the missing stuff I will
write some more.
--
Mark H. Wood, Lead System Programmer mw...@iupui.edu
Asking whether markets are efficient is like asking whether people are smart.
pgpfuDT2RpVxp.pgp
Description: PGP signature
How to configure plugin with default values
I'm creating a plugin and having trouble getting the container (plexus) to configure initial values. I've started with the dependency plugin as a basis and see that somehow mojo parameters get set with default values...I assume this is happening by the container but what's the secret to making this work? I've added some new mojo parameters following the same convention and they are null at runtime (running unit test). Is there some documentation on the creating/wiring of plugin mojos to the container? -Dave - To unsubscribe, e-mail: users-unsubscr...@maven.apache.org For additional commands, e-mail: users-h...@maven.apache.org
how to configure maven-test-plugin
hello all, i want to mock a final class, for that i need to use jdave to do so i need to launch your tests with the following vm parameter: -javaagent:/path/to/workspace/jdave-unfinalizer/target/jdave-unfinalizer-jar-name.jar i did a search and the maven-test-plugin can do this ( i dont understand why it is a dependency not a plugin !) how to configure this plugin in the pom.xml to modify properties lik maven.junit.jvmand maven.junit.jvmargs thanks in advance -- -- الله المعين منير الصبور
Fwd: how to configure maven-test-plugin
hello all, i want to mock a final class, for that i need to use jdave to do so i need to launch your tests with the following vm parameter: -javaagent:/path/to/workspace/jdave-unfinalizer/target/jdave-unfinalizer-jar-name.jar i did a search and the maven-test-plugin can do this ( i dont understand why it is a dependency not a plugin !) how to configure this plugin in the pom.xml to modify properties lik maven.junit.jvmand maven.junit.jvmargs thanks in advance -- -- الله المعين منير الصبور -- -- الله المعين منير الصبور
Re: how to configure build processes with mavn
Having different "flavors" of your artifacts, depending on which environment you build for is not recommended. In Maven, a specific artifact defined by GAV (i.e. a specific version of your artifact) cannot (should not) change. We've had numerous discussions regarding this on the list. It simply isn't the Maven way. What you should do, is to try to keep your configuration separated from your binaries. And then create separate artifacts (either through classifiers or different projects) for each environment. And in your build process, by default, you build them all. /Anders On Mon, Jun 21, 2010 at 14:58, Mariyan Nenchev wrote: > Hi, > > I have a huge java project with several modules. The build is based on > maven. There are many parameters, that are used in the project and i have > placed them in the database. They are environment specific (for example > parameter x has value1 for TEST, value2 for UAT, value3 for PROD so on..). > I > want to create 3 different configurations about these 3 environments. And > tell something like project_root$mvn install configuration1 -> this builds > me the whole project by using parameters setuped for UAT for example. > > Is there any way to do this with maven? > > Regards. >
AW: how to configure build processes with mavn
Hi, I think, there are 2 features available supporting your requirement. 1) /profiles/profile 2) /build/plugins/plugin/executions/execution I know that 1) can be triggered via "mvn -Pconf1,conf2" but for the ability to execute more than one profile at once, the profile need to contain a execution with a unique execution id. This leads me to the following question: Is it possible to enable/disable an execution using a mvn parameter? (Alternative: is it possible to enable/disable an execution based on a profile property? Regards, Bernhard -Ursprüngliche Nachricht- Von: Mariyan Nenchev [mailto:mnenc...@trinitascapital.com] Gesendet: Montag, 21. Juni 2010 14:59 An: users@maven.apache.org Betreff: how to configure build processes with mavn Hi, I have a huge java project with several modules. The build is based on maven. There are many parameters, that are used in the project and i have placed them in the database. They are environment specific (for example parameter x has value1 for TEST, value2 for UAT, value3 for PROD so on..). I want to create 3 different configurations about these 3 environments. And tell something like project_root$mvn install configuration1 -> this builds me the whole project by using parameters setuped for UAT for example. Is there any way to do this with maven? Regards. - To unsubscribe, e-mail: users-unsubscr...@maven.apache.org For additional commands, e-mail: users-h...@maven.apache.org
how to configure build processes with mavn
Hi, I have a huge java project with several modules. The build is based on maven. There are many parameters, that are used in the project and i have placed them in the database. They are environment specific (for example parameter x has value1 for TEST, value2 for UAT, value3 for PROD so on..). I want to create 3 different configurations about these 3 environments. And tell something like project_root$mvn install configuration1 -> this builds me the whole project by using parameters setuped for UAT for example. Is there any way to do this with maven? Regards.
Re: maven-javadoc-plugin how to configure both aggregate and non-appregate reports
false
2009/11/2 David Hoffer :
> I'm using the latest version of maven-javadoc-plugin using its new
> reportSets options, Since I have a multi module project I'd like the top
> level to have aggregate javadoc reports and then at the java child projects
> have javadocs for that module too.
>
> However I never get any javadocs reports at the top level. Here is how my
> project is configured.
>
> Top level pom:
>
> org.apache.maven.plugins
> maven-javadoc-plugin
> ${maven-javadoc-plugin.version}
>
>
>
>
>
> aggregate
>
>
>
>
> aggregate
>
>
>
>
>
> Java Child pom:
>
> org.apache.maven.plugins
> maven-javadoc-plugin
> ${maven-javadoc-plugin.version}
>
>
>
>
>
> non-aggregate
>
>
>
>
> javadoc
>
>
>
>
>
> Flex child pom:
>
> org.sonatype.flexmojos
> flexmojos-maven-plugin
> ${flexmojos-maven-plugin.version}
>
> true
>
>
>
> How am I supposed to do this to get reports at the top level too?
>
> -Dave
>
-
To unsubscribe, e-mail: users-unsubscr...@maven.apache.org
For additional commands, e-mail: users-h...@maven.apache.org
maven-javadoc-plugin how to configure both aggregate and non-appregate reports
I'm using the latest version of maven-javadoc-plugin using its new
reportSets options, Since I have a multi module project I'd like the top
level to have aggregate javadoc reports and then at the java child projects
have javadocs for that module too.
However I never get any javadocs reports at the top level. Here is how my
project is configured.
Top level pom:
org.apache.maven.plugins
maven-javadoc-plugin
${maven-javadoc-plugin.version}
aggregate
aggregate
Java Child pom:
org.apache.maven.plugins
maven-javadoc-plugin
${maven-javadoc-plugin.version}
non-aggregate
javadoc
Flex child pom:
org.sonatype.flexmojos
flexmojos-maven-plugin
${flexmojos-maven-plugin.version}
true
How am I supposed to do this to get reports at the top level too?
-Dave
Re: How to configure proxy for multiple protocols
Thanks for your response. I've created an issue for this http://jira.codehaus.org/browse/MNG-4394 On Wed, Oct 14, 2009 at 11:32, Michal Hlavac wrote: > network proxy settings in maven has really bad design. As I know, only > one proxy can active at the same time. > > m. > > Hugo Palma wrote / napísal(a): > > I'm trying to use the same proxy for both http and https but i'm having > no > > success. > > I've tried configuring like this: > > > > > > > > myhttp > > true > > http > > 192.168.0.4 > > 8080 > > > > > > > > myhttps > > true > > https > > 192.168.0.4 > > 8080 > > > > > > > > But only the first proxy is used. I also tried using the same id for both > > proxies with no success. > > Any ideas ? > > > > Thanks. > > > > >
Re: How to configure proxy for multiple protocols
network proxy settings in maven has really bad design. As I know, only one proxy can active at the same time. m. Hugo Palma wrote / napísal(a): > I'm trying to use the same proxy for both http and https but i'm having no > success. > I've tried configuring like this: > > > > myhttp > true > http > 192.168.0.4 > 8080 > > > > myhttps > true > https > 192.168.0.4 > 8080 > > > > But only the first proxy is used. I also tried using the same id for both > proxies with no success. > Any ideas ? > > Thanks. > smime.p7s Description: S/MIME Cryptographic Signature
How to configure proxy for multiple protocols
I'm trying to use the same proxy for both http and https but i'm having no success. I've tried configuring like this: myhttp true http 192.168.0.4 8080 myhttps true https 192.168.0.4 8080 But only the first proxy is used. I also tried using the same id for both proxies with no success. Any ideas ? Thanks.
Re: Maven Resource Plugin - Filtering: How to configure custom Token to be filtered
probably a bug. (I have to investigate more)
Can you create a issue [1] and attach a simple project to reproduce the issue.
Thanks !
--
Olivier
[1] http://jira.codehaus.org/browse/MRESOURCES
2009/9/24 Torsten Krah :
> Am Donnerstag, 24. September 2009 13:55:08 schrieb Olivier Lamy:
>> Have a look at delimiters [1] parameters in the resources mojo
>
> Hi, thx for this hint.
> Did have a look there - delimiters does sounds nice (i need to turn off
> useDefaultDelimiters to get them respected), however its not working as
> expected (at least expected by me ;-)).
>
>
>
> org.apache.maven.plugins
> maven-resources-plugin
> 2.4
>
> false
>
> $
> @
> #
> ${*}
>
> UTF-8
>
>
>
> Using this i get a NullPointerException:
> java.lang.NullPointerException
> at
> org.codehaus.plexus.interpolation.multi.DelimiterSpecification.parse(DelimiterSpecification.java:54)
> at
> org.codehaus.plexus.interpolation.multi.MultiDelimiterStringSearchInterpolator.setDelimiterSpecs(MultiDelimiterStringSearchInterpolator.java:394)
>
>
> Removing the ${*} (although the docs does mention it as valid and i would like
> to use it too) it runs but not working like expected:
>
> Some exampled i tried:
>
> mvn clean resources:resource -Dtest.value=true
>
> As example using this property file:
>
> test.value=$test.value$
> test.value=#test.value#
> test.val...@test.value@
> test.value=${test.value}
>
> Using only:
>
> $
> @
>
> i get this result:
>
> test.value=true
> test.value=#test.value#
> test.value=true
> test.value=${test.value}
>
> Using this one:
>
> $
> @
> #
>
> the result is:
>
> test.value=true
> test.value=#test.value#
> test.val...@test.value@
> test.value=${test.value}
>
>
> Whats wrong here? Did i miss something or is my plugin configuration
> incorrect? Might this be a bug?
>
>
> Torsten
>
> --
> Bitte senden Sie mir keine Word- oder PowerPoint-Anhänge.
> Siehe http://www.gnu.org/philosophy/no-word-attachments.de.html
>
> Really, I'm not out to destroy Microsoft. That will just be a
> completely unintentional side effect."
> -- Linus Torvalds
>
--
Olivier
-
To unsubscribe, e-mail: users-unsubscr...@maven.apache.org
For additional commands, e-mail: users-h...@maven.apache.org
Re: Maven Resource Plugin - Filtering: How to configure custom Token to be filtered
Am Donnerstag, 24. September 2009 13:55:08 schrieb Olivier Lamy:
> Have a look at delimiters [1] parameters in the resources mojo
Hi, thx for this hint.
Did have a look there - delimiters does sounds nice (i need to turn off
useDefaultDelimiters to get them respected), however its not working as
expected (at least expected by me ;-)).
org.apache.maven.plugins
maven-resources-plugin
2.4
false
$
@
#
${*}
UTF-8
Using this i get a NullPointerException:
java.lang.NullPointerException
at
org.codehaus.plexus.interpolation.multi.DelimiterSpecification.parse(DelimiterSpecification.java:54)
at
org.codehaus.plexus.interpolation.multi.MultiDelimiterStringSearchInterpolator.setDelimiterSpecs(MultiDelimiterStringSearchInterpolator.java:394)
Removing the ${*} (although the docs does mention it as valid and i would like
to use it too) it runs but not working like expected:
Some exampled i tried:
mvn clean resources:resource -Dtest.value=true
As example using this property file:
test.value=$test.value$
test.value=#test.value#
test.val...@test.value@
test.value=${test.value}
Using only:
$
@
i get this result:
test.value=true
test.value=#test.value#
test.value=true
test.value=${test.value}
Using this one:
$
@
#
the result is:
test.value=true
test.value=#test.value#
test.val...@test.value@
test.value=${test.value}
Whats wrong here? Did i miss something or is my plugin configuration
incorrect? Might this be a bug?
Torsten
--
Bitte senden Sie mir keine Word- oder PowerPoint-Anhänge.
Siehe http://www.gnu.org/philosophy/no-word-attachments.de.html
Really, I'm not out to destroy Microsoft. That will just be a
completely unintentional side effect."
-- Linus Torvalds
smime.p7s
Description: S/MIME cryptographic signature
Re: Maven Resource Plugin - Filtering: How to configure custom Token to be filtered
Hi,
Have a look at delimiters [1] parameters in the resources mojo
HTH,
--
Olivier
http://maven.apache.org/plugins/maven-resources-plugin/resources-mojo.html#delimiters
2009/9/24 Torsten Krah :
> Hi,
>
> i want to migrate from antmod to maven.
> I wonder if it is possible to configure additional tokens to replace my
> property placeholders ( not only @...@ and ${} ).
>
> I want to replace $$ ones.
>
> I've read http://maven.apache.org/shared/maven-filtering/usage.html but
> looking at latest trunk or beta3 of the maven shared component the docs
> mention MavenProjectValueSource which is gone already and does only exist in
> beta2 anymore (exists only up to revision 806645).
>
> So what would be the best way to get my custom token filtered?
> Is it configurable or have i have to write my own resource mojo (against trunk
> version or beta3, what must be done as the example is outdated, isn't it?).
>
> thx for help
>
> Torsten
>
>
> --
> Bitte senden Sie mir keine Word- oder PowerPoint-Anhänge.
> Siehe http://www.gnu.org/philosophy/no-word-attachments.de.html
>
> Really, I'm not out to destroy Microsoft. That will just be a
> completely unintentional side effect."
> -- Linus Torvalds
>
--
Olivier
-
To unsubscribe, e-mail: users-unsubscr...@maven.apache.org
For additional commands, e-mail: users-h...@maven.apache.org
Maven Resource Plugin - Filtering: How to configure custom Token to be filtered
Hi,
i want to migrate from antmod to maven.
I wonder if it is possible to configure additional tokens to replace my
property placeholders ( not only @...@ and ${} ).
I want to replace $$ ones.
I've read http://maven.apache.org/shared/maven-filtering/usage.html but
looking at latest trunk or beta3 of the maven shared component the docs
mention MavenProjectValueSource which is gone already and does only exist in
beta2 anymore (exists only up to revision 806645).
So what would be the best way to get my custom token filtered?
Is it configurable or have i have to write my own resource mojo (against trunk
version or beta3, what must be done as the example is outdated, isn't it?).
thx for help
Torsten
--
Bitte senden Sie mir keine Word- oder PowerPoint-Anhänge.
Siehe http://www.gnu.org/philosophy/no-word-attachments.de.html
Really, I'm not out to destroy Microsoft. That will just be a
completely unintentional side effect."
-- Linus Torvalds
smime.p7s
Description: S/MIME cryptographic signature
Re: How to configure maven-site-plugin to publish jar?
David Hoffer wrote: > Can and if possible how can I configure the maven-site-plugin so that it > bundles the entire site in a jar and then deploys it? Ideally the whole > process would remain contained within the site-deploy phase. > > -Dave > You can use the site:jar goal for this purpose: http://maven.apache.org/plugins/maven-site-plugin/jar-mojo.html The site.jar file is attached to your main artifact by default. -- Dennis Lundberg - To unsubscribe, e-mail: users-unsubscr...@maven.apache.org For additional commands, e-mail: users-h...@maven.apache.org
How to configure maven-site-plugin to publish jar?
Can and if possible how can I configure the maven-site-plugin so that it bundles the entire site in a jar and then deploys it? Ideally the whole process would remain contained within the site-deploy phase. -Dave
Re: how to configure existing project for maven2
Hi, Some questions you need to find responses : * is your project single module or multiple ? => one pom or several pom with one parent * does your project tree respects the default structure used by maven (src/main/java, src/main/resources, ...) ? modify your project structure or configure it in the pom (http://maven.apache.org/pom.html#Build_Element). My advice : try to match as much as possible the default configuration . Hope it helps ... Gab' 2009/4/10 rohan chauhan > > > Hi al, > > I'm wondering that how can i configure an existing project in maven2. > > How to create pom.xml file for that. > > And is it necessary to have pom.xml file in each sub-folder of root folder > > > > > Do not follow where the path may lead. Go instead where there is no path > and leave a trail ! ! ! > > > > > * Learn to enjoy every minute of your life. Be happy now. Don't wait for > something outside of yourself to make you happy in the future. Think how > really precious is the time you have to spend, whether it's at work or with > your family.. Every minute should be enjoyed and savored > by forgetting problems. * - My Thought > > > > > Add more friends to your messenger and enjoy! Go to > http://messenger.yahoo.com/invite/ >
how to configure existing project for maven2
Hi al, I'm wondering that how can i configure an existing project in maven2. How to create pom.xml file for that. And is it necessary to have pom.xml file in each sub-folder of root folder Do not follow where the path may lead. Go instead where there is no path and leave a trail ! ! ! * Learn to enjoy every minute of your life. Be happy now. Don't wait for something outside of yourself to make you happy in the future. Think how really precious is the time you have to spend, whether it's at work or with your family.. Every minute should be enjoyed and savored by forgetting problems. * - My Thought Add more friends to your messenger and enjoy! Go to http://messenger.yahoo.com/invite/
How to configure maven-idea-plugin to include/exclude directories?
How can I configure maven-idea-plugin to allow target/generated-sources as IDEA source but disallow all others? Having target included by default seriously slows down IDEA when it finds new javadocs, etc. -Dave - To unsubscribe, e-mail: users-unsubscr...@maven.apache.org For additional commands, e-mail: users-h...@maven.apache.org
Re: How to configure resources plugin to copy extra files
I had the same issue... and I didn't want to set the extra resources in the
build section of the pom, because i didn't want to include them in my jar.
I think this has to do with the version of the maven-resources-plugin that
you have installed. If you run "maven -U" to update to the latest version
of all dependencies, it should solve the problem. Or you can explicitly set
the version to 2.3:
maven-resources-plugin
2.3
...
zorro2b wrote:
>
> I am converting a project to use Maven. I have got it to compile but the
> tests are failing because there are xml files in with the java source that
> need to be copied over with the classes. I don't want to move these into
> the resources dir, so I followed the example here:
> http://maven.apache.org/plugins/maven-resources-plugin/examples/copy-resources.html
>
> but I get the error "'copy-resources' was specified in an execution, but
> not found in the plugin"
>
> so I have tried changing the goal to "resources" as well as removing the
> goals section completely. Both get rid of the error, but no files are
> copied.
>
> Does anyone have a working config they could share?
>
> Here is my current config:
>
> maven-resources-plugin
>
>
> copy-resources
> process-resources
>
>
> resources
>
>
> ${basedir}/target/classes
>
>
> src/main/java
>
> **/*.xml
>
>
>
>
>
>
>
>
>
--
View this message in context:
http://www.nabble.com/How-to-configure-resources-plugin-to-copy-extra-files-tp21067611p22189863.html
Sent from the Maven - Users mailing list archive at Nabble.com.
-
To unsubscribe, e-mail: users-unsubscr...@maven.apache.org
For additional commands, e-mail: users-h...@maven.apache.org
Re: How to configure resources plugin to copy extra files
You may not need to for his example though the example on the page sited does
not work. Anyone know what the correct execution value should be?
Configuring the plug-in is useful because in the example it states you can
attach it to a phase.
brettporter wrote:
>
> You shouldn't need to configure the resource plugin at all, just the
> following will work:
>
>
>
> src/main/java
>
>**/*.xml
>
>
>
>
> Cheers,
> Brett
>
> On 18/12/2008, at 5:19 PM, zorro2b wrote:
>
>>
>> I am converting a project to use Maven. I have got it to compile but
>> the
>> tests are failing because there are xml files in with the java
>> source that
>> need to be copied over with the classes. I don't want to move these
>> into the
>> resources dir, so I followed the example here:
>> http://maven.apache.org/plugins/maven-resources-plugin/examples/copy-resources.html
>>
>> but I get the error "'copy-resources' was specified in an execution,
>> but not
>> found in the plugin"
>>
>> so I have tried changing the goal to "resources" as well as removing
>> the
>> goals section completely. Both get rid of the error, but no files are
>> copied.
>>
>> Does anyone have a working config they could share?
>>
>> Here is my current config:
>>
>>maven-resources-plugin
>>
>>
>>copy-resources
>>process-resources
>>
>>
>> resources
>>
>>
>> ${basedir}/target/classes> outputDirectory>
>>
>>
>> src/main/java
>>
>> **/*.xml
>>
>>
>>
>>
>>
>>
>>
>>
>> --
>> View this message in context:
>> http://www.nabble.com/How-to-configure-resources-plugin-to-copy-extra-files-tp21067611p21067611.html
>> Sent from the Maven - Users mailing list archive at Nabble.com.
>>
>>
>> -
>> To unsubscribe, e-mail: users-unsubscr...@maven.apache.org
>> For additional commands, e-mail: users-h...@maven.apache.org
>>
>
> --
> Brett Porter
> br...@apache.org
> http://blogs.exist.com/bporter/
>
>
> -
> To unsubscribe, e-mail: users-unsubscr...@maven.apache.org
> For additional commands, e-mail: users-h...@maven.apache.org
>
>
>
--
View this message in context:
http://www.nabble.com/How-to-configure-resources-plugin-to-copy-extra-files-tp21067611p22043924.html
Sent from the Maven - Users mailing list archive at Nabble.com.
-
To unsubscribe, e-mail: users-unsubscr...@maven.apache.org
For additional commands, e-mail: users-h...@maven.apache.org
Re: How to configure resources plugin to copy extra files
Excellent! That worked, thanks.
brettporter wrote:
>
> You shouldn't need to configure the resource plugin at all, just the
> following will work:
>
>
>
> src/main/java
>
>**/*.xml
>
>
>
>
> Cheers,
> Brett
>
> On 18/12/2008, at 5:19 PM, zorro2b wrote:
>
>>
>> I am converting a project to use Maven. I have got it to compile but
>> the
>> tests are failing because there are xml files in with the java
>> source that
>> need to be copied over with the classes. I don't want to move these
>> into the
>> resources dir, so I followed the example here:
>> http://maven.apache.org/plugins/maven-resources-plugin/examples/copy-resources.html
>>
>> but I get the error "'copy-resources' was specified in an execution,
>> but not
>> found in the plugin"
>>
>> so I have tried changing the goal to "resources" as well as removing
>> the
>> goals section completely. Both get rid of the error, but no files are
>> copied.
>>
>> Does anyone have a working config they could share?
>>
>> Here is my current config:
>>
>>maven-resources-plugin
>>
>>
>>copy-resources
>>process-resources
>>
>>
>> resources
>>
>>
>> ${basedir}/target/classes> outputDirectory>
>>
>>
>> src/main/java
>>
>> **/*.xml
>>
>>
>>
>>
>>
>>
>>
>>
>> --
>> View this message in context:
>> http://www.nabble.com/How-to-configure-resources-plugin-to-copy-extra-files-tp21067611p21067611.html
>> Sent from the Maven - Users mailing list archive at Nabble.com.
>>
>>
>> -
>> To unsubscribe, e-mail: users-unsubscr...@maven.apache.org
>> For additional commands, e-mail: users-h...@maven.apache.org
>>
>
> --
> Brett Porter
> br...@apache.org
> http://blogs.exist.com/bporter/
>
>
> -
> To unsubscribe, e-mail: users-unsubscr...@maven.apache.org
> For additional commands, e-mail: users-h...@maven.apache.org
>
>
>
--
View this message in context:
http://www.nabble.com/How-to-configure-resources-plugin-to-copy-extra-files-tp21067611p21068948.html
Sent from the Maven - Users mailing list archive at Nabble.com.
-
To unsubscribe, e-mail: users-unsubscr...@maven.apache.org
For additional commands, e-mail: users-h...@maven.apache.org
Re: How to configure resources plugin to copy extra files
You shouldn't need to configure the resource plugin at all, just the
following will work:
src/main/java
**/*.xml
Cheers,
Brett
On 18/12/2008, at 5:19 PM, zorro2b wrote:
I am converting a project to use Maven. I have got it to compile but
the
tests are failing because there are xml files in with the java
source that
need to be copied over with the classes. I don't want to move these
into the
resources dir, so I followed the example here:
http://maven.apache.org/plugins/maven-resources-plugin/examples/copy-resources.html
but I get the error "'copy-resources' was specified in an execution,
but not
found in the plugin"
so I have tried changing the goal to "resources" as well as removing
the
goals section completely. Both get rid of the error, but no files are
copied.
Does anyone have a working config they could share?
Here is my current config:
maven-resources-plugin
copy-resources
process-resources
resources
${basedir}/target/classesoutputDirectory>
src/main/java
**/*.xml
--
View this message in context:
http://www.nabble.com/How-to-configure-resources-plugin-to-copy-extra-files-tp21067611p21067611.html
Sent from the Maven - Users mailing list archive at Nabble.com.
-
To unsubscribe, e-mail: users-unsubscr...@maven.apache.org
For additional commands, e-mail: users-h...@maven.apache.org
--
Brett Porter
br...@apache.org
http://blogs.exist.com/bporter/
-
To unsubscribe, e-mail: users-unsubscr...@maven.apache.org
For additional commands, e-mail: users-h...@maven.apache.org
How to configure resources plugin to copy extra files
I am converting a project to use Maven. I have got it to compile but the
tests are failing because there are xml files in with the java source that
need to be copied over with the classes. I don't want to move these into the
resources dir, so I followed the example here:
http://maven.apache.org/plugins/maven-resources-plugin/examples/copy-resources.html
but I get the error "'copy-resources' was specified in an execution, but not
found in the plugin"
so I have tried changing the goal to "resources" as well as removing the
goals section completely. Both get rid of the error, but no files are
copied.
Does anyone have a working config they could share?
Here is my current config:
maven-resources-plugin
copy-resources
process-resources
resources
${basedir}/target/classes
src/main/java
**/*.xml
--
View this message in context:
http://www.nabble.com/How-to-configure-resources-plugin-to-copy-extra-files-tp21067611p21067611.html
Sent from the Maven - Users mailing list archive at Nabble.com.
-
To unsubscribe, e-mail: users-unsubscr...@maven.apache.org
For additional commands, e-mail: users-h...@maven.apache.org
Re: How to configure..
> We are planning to use maven in our project. our project has the production > server. And we need to configure the maven repository for each developer > instance like mirror or something else. So that the developer can test > locally their part without touching the main pom.xml. Please guide me how to > configure this. You probably want to configure the settings.xml file on each of your developer's workstations. But it is hard to tell what exaxctly you are asking, or what your problem is. You will have better luck on this list if you ask specific, detailed questions and demonstrate that you have done your own homework/reading before asking on the list. Wayne - To unsubscribe, e-mail: users-unsubscr...@maven.apache.org For additional commands, e-mail: users-h...@maven.apache.org
Re: How to configure..
Download Maven2 and set the library files (jars) names specified in the tags. for reference see www.roseindia.net radha c wrote: > > Hi, > > We are planning to use maven in our project. our project has the > production server. And we need to configure the maven repository for each > developer instance like mirror or something else. So that the developer > can test locally their part without touching the main pom.xml. Please > guide me how to configure this. > > Thanks, > Radha.C > > > > > - > To unsubscribe, e-mail: users-unsubscr...@maven.apache.org > For additional commands, e-mail: users-h...@maven.apache.org > > > -- View this message in context: http://n2.nabble.com/How-to-configure..-tp1646696p1646761.html Sent from the maven users mailing list archive at Nabble.com. - To unsubscribe, e-mail: users-unsubscr...@maven.apache.org For additional commands, e-mail: users-h...@maven.apache.org
How to configure..
Hi, We are planning to use maven in our project. our project has the production server. And we need to configure the maven repository for each developer instance like mirror or something else. So that the developer can test locally their part without touching the main pom.xml. Please guide me how to configure this. Thanks, Radha.C - To unsubscribe, e-mail: users-unsubscr...@maven.apache.org For additional commands, e-mail: users-h...@maven.apache.org
Re: how to configure hibernate3-maven-plugin
I have a vague memory that the AppFuse archetypes use the hibernate plugin, but I can't swear to it; try this: http://appfuse.org/display/APF/AppFuse+QuickStart dahoffer wrote: Can someone point me to an example of how to use hibernate3-maven-plugin to: 1. Create hibernate mapping files from POJOs. 2. Create hibernate configuration file. 3. Create db schema from 1 & 2. 4. Deploy schema to database. Thanks much, -Dave - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
how to configure hibernate3-maven-plugin
Can someone point me to an example of how to use hibernate3-maven-plugin to: 1. Create hibernate mapping files from POJOs. 2. Create hibernate configuration file. 3. Create db schema from 1 & 2. 4. Deploy schema to database. Thanks much, -Dave -- View this message in context: http://www.nabble.com/how-to-configure-hibernate3-maven-plugin-tp20876624p20876624.html Sent from the Maven - Users mailing list archive at Nabble.com. - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: Re[2]: Netbeans plugin: how to configure repository location?
Under miscelaneous is maven. Alternatively you can edit the settings.xml file manually. Milos On Mon, Oct 20, 2008 at 6:18 PM, Dmitry S. Kravchenko <[EMAIL PROTECTED]> wrote: > Hi, Milos! > > I can't locate it. Tools/Options has the common buttons at the top: > General, Editor, Java Code, Fonts & Colors, Keymap, C/C++, > Miscelaneous. > >> the Tools/Options shall have a panel where you can set the local >> repository. That will write in your ~/.m2/settings.xml file the >> appropriate settings entry.. > >>> I found a way to configure repository location in standalone version >>> of Maven. Is it a way to do the same with Maven plugin for Netbeans? >>> It is still placing repository in .m2 folder within %HOME%. > > > Dims. > > > > - > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re[2]: Netbeans plugin: how to configure repository location?
Hi, Milos! I can't locate it. Tools/Options has the common buttons at the top: General, Editor, Java Code, Fonts & Colors, Keymap, C/C++, Miscelaneous. > the Tools/Options shall have a panel where you can set the local > repository. That will write in your ~/.m2/settings.xml file the > appropriate settings entry.. >> I found a way to configure repository location in standalone version >> of Maven. Is it a way to do the same with Maven plugin for Netbeans? >> It is still placing repository in .m2 folder within %HOME%. Dims. - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: Netbeans plugin: how to configure repository location?
the Tools/Options shall have a panel where you can set the local repository. That will write in your ~/.m2/settings.xml file the appropriate settings entry.. Milos On Mon, Oct 20, 2008 at 5:33 PM, Dmitry S. Kravchenko <[EMAIL PROTECTED]> wrote: > Hi! > > I'm a Maven newbie. > > I found a way to configure repository location in standalone version > of Maven. Is it a way to do the same with Maven plugin for Netbeans? > It is still placing repository in .m2 folder within %HOME%. > > Thanks. > > Dims. > > > - > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Netbeans plugin: how to configure repository location?
Hi! I'm a Maven newbie. I found a way to configure repository location in standalone version of Maven. Is it a way to do the same with Maven plugin for Netbeans? It is still placing repository in .m2 folder within %HOME%. Thanks. Dims. - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: How to configure a JBoss to link to the webapp folder of a WAR project
I think I know the reason...
Not Maven or Eclipse related!
My other projects were AspectJ ones. They have many aspects and these
classes are not hot replaced. I guess this is a limitation/feature of
AspectJ. :-(
On Tue, Sep 2, 2008 at 2:50 PM, Pedro Viegas <[EMAIL PROTECTED]> wrote:
> Martin... THANKS!
>
> I tried the antiJARLocking=true like you said and the inner modules began
> to work.
> I now have all classes hot-code replacing fine, as long as they are of the
> same eclipse project (in it's build path).
>
> Only one little detail is missing, and it would be very handy.
> Dependent projects.
> Maven dependencies are linked to other projects in the workspace. It knows
> it can browse the sources when in debug for instance. But, these classes are
> not hot-deployed, even with the antiJARLocking set to true. Any clue? Been
> trying several things to try to figure out without sucess so far...
>
> Ragards,
>
>
> On Tue, Sep 2, 2008 at 1:59 AM, Martin Gainty <[EMAIL PROTECTED]> wrote:
>
>>
>> did you look at antiJARLocking=true
>>
>> http://www.jboss.org/file-access/default/members/jbossweb/freezone/docs/2.1.0/config/context.html
>> otherwise the classloader locks the jar and no other process can deploy on
>> top of itMartin__ Disclaimer and
>> confidentiality note Everything in this e-mail and any attachments relates
>> to the official business of Sender. This transmission is of a confidential
>> nature and Sender does not endorse distribution to any party other than
>> intended recipient. Sender does not necessarily endorse content contained
>> within this transmission. > Date: Mon, 1 Sep 2008 18:30:35 +0100> From:
>> [EMAIL PROTECTED]> To: users@maven.apache.org> Subject: Re: How to
>> configure a JBoss to link to the webapp folder of a WAR project> > Many
>> apologies!> My previous post had so many tipos I had to repost it here...
>> Will be more> careful in the future... and type slower too! :-D> > Hi
>> again,> > Following a tip from John Newman I used this Eclipse plugin...>
>> http://andrei.gmxhome.de/filesync/> > This allows us to configure an
>> automated file copy operation for specific> project folders to whatever
>> folder we want to.> So I configured the plugin to copy the webapp folder to
>> the exploded war> target folder and got the JSP/CSS/Images and JS files hot
>> code replace> working! (Thanks John!)> > This is fine except for
>> multi-module projects or dependent projects.> For these I still cannot get
>> hot-code replacement for classes since they are> bundled as JARs even if the
>> dependent projects are open in eclipse and> workspace resolution is active
>> im the Maven Eclipse Plugin.> > Has anyone gotten further with this approach
>> or a similar one?> > Thanks,> > On Mon, Sep 1, 2008 at 6:09 PM, Pedro Viegas
>> <[EMAIL PROTECTED]> wrote:> > > Hi again,> >> > Following a tip from
>> John Newman I used this Eclipse plugin...> >
>> http://andrei.gmxhome.de/filesync/> >> > This allows us to configure an
>> automaed file copy operation for specific> > project folders to whateve
>> folder we want to.> > So I configured the plugin to copy the webapp folder
>> to the exploded wr> > target folder ad got the JSP/CS/Images/JS files hot
>> code replace working!> > (Thans John!)> >> > This is fine except for
>> multi-module projects or dependant projects.> > For these I still cannot get
>> hot-code replacement for classes since they> > are bundled as JARs even if
>> the dependant projects are open in eclipsed and> > wirkspace resolution is
>> active um the Maven Eclise Plugin.> >> > Has anyone gotten further with this
>> approuch or a similar one?> >> > Thanks,> >> >> >> > On Fri, Jul 11, 2008 at
>> 11:21 AM, Pedro Viegas <[EMAIL PROTECTED]>wrote:> >> >> Hi David,> >>>
>> >> Sorry for to confusing post.> >> I'll try to explain better.> >>> >> I
>> have hot deployment in place. It is working, just not in the best way.> >>
>> What I have suceeded so far:> >>> >> I have setup JBoss deploy URLs to
>> search my> >> ${maven.project}/target/{projectWAR}> >> I deploy using mvn
>> war:exploded so I don't have to wait for the> >> compression phase.> >> For
>> JBoss to accept a dir like a WAR (that does not end in .war - maven's> >&g
Re: How to configure a JBoss to link to the webapp folder of a WAR project
Martin... THANKS!
I tried the antiJARLocking=true like you said and the inner modules began to
work.
I now have all classes hot-code replacing fine, as long as they are of the
same eclipse project (in it's build path).
Only one little detail is missing, and it would be very handy.
Dependent projects.
Maven dependencies are linked to other projects in the workspace. It knows
it can browse the sources when in debug for instance. But, these classes are
not hot-deployed, even with the antiJARLocking set to true. Any clue? Been
trying several things to try to figure out without sucess so far...
Ragards,
On Tue, Sep 2, 2008 at 1:59 AM, Martin Gainty <[EMAIL PROTECTED]> wrote:
>
> did you look at antiJARLocking=true
>
> http://www.jboss.org/file-access/default/members/jbossweb/freezone/docs/2.1.0/config/context.html
> otherwise the classloader locks the jar and no other process can deploy on
> top of itMartin__ Disclaimer and
> confidentiality note Everything in this e-mail and any attachments relates
> to the official business of Sender. This transmission is of a confidential
> nature and Sender does not endorse distribution to any party other than
> intended recipient. Sender does not necessarily endorse content contained
> within this transmission. > Date: Mon, 1 Sep 2008 18:30:35 +0100> From:
> [EMAIL PROTECTED]> To: users@maven.apache.org> Subject: Re: How to
> configure a JBoss to link to the webapp folder of a WAR project> > Many
> apologies!> My previous post had so many tipos I had to repost it here...
> Will be more> careful in the future... and type slower too! :-D> > Hi
> again,> > Following a tip from John Newman I used this Eclipse plugin...>
> http://andrei.gmxhome.de/filesync/> > This allows us to configure an
> automated file copy operation for specific> project folders to whatever
> folder we want to.> So I configured the plugin to copy the webapp folder to
> the exploded war> target folder and got the JSP/CSS/Images and JS files hot
> code replace> working! (Thanks John!)> > This is fine except for
> multi-module projects or dependent projects.> For these I still cannot get
> hot-code replacement for classes since they are> bundled as JARs even if the
> dependent projects are open in eclipse and> workspace resolution is active
> im the Maven Eclipse Plugin.> > Has anyone gotten further with this approach
> or a similar one?> > Thanks,> > On Mon, Sep 1, 2008 at 6:09 PM, Pedro Viegas
> <[EMAIL PROTECTED]> wrote:> > > Hi again,> >> > Following a tip from
> John Newman I used this Eclipse plugin...> >
> http://andrei.gmxhome.de/filesync/> >> > This allows us to configure an
> automaed file copy operation for specific> > project folders to whateve
> folder we want to.> > So I configured the plugin to copy the webapp folder
> to the exploded wr> > target folder ad got the JSP/CS/Images/JS files hot
> code replace working!> > (Thans John!)> >> > This is fine except for
> multi-module projects or dependant projects.> > For these I still cannot get
> hot-code replacement for classes since they> > are bundled as JARs even if
> the dependant projects are open in eclipsed and> > wirkspace resolution is
> active um the Maven Eclise Plugin.> >> > Has anyone gotten further with this
> approuch or a similar one?> >> > Thanks,> >> >> >> > On Fri, Jul 11, 2008 at
> 11:21 AM, Pedro Viegas <[EMAIL PROTECTED]>wrote:> >> >> Hi David,> >>>
> >> Sorry for to confusing post.> >> I'll try to explain better.> >>> >> I
> have hot deployment in place. It is working, just not in the best way.> >>
> What I have suceeded so far:> >>> >> I have setup JBoss deploy URLs to
> search my> >> ${maven.project}/target/{projectWAR}> >> I deploy using mvn
> war:exploded so I don't have to wait for the> >> compression phase.> >> For
> JBoss to accept a dir like a WAR (that does not end in .war - maven's> >>
> notation), I have configured the war plugin to create the exploded dir with>
> >> ".war" sufix. Like so...> >>> >> > >> > >>
> maven-war-plugin> >> > >>
> > >>
> ${project.build.directory}/${project.build.finalName}.war >>
> webappDirectory>> >> > >> > >> And this is what I
> have.> >> All java classes get hot replaced by JBoss Eclipse plugin OK.> >>
> JSP's are not!> >> To refresh JSP a
RE: How to configure a JBoss to link to the webapp folder of a WAR project
did you look at antiJARLocking=true
http://www.jboss.org/file-access/default/members/jbossweb/freezone/docs/2.1.0/config/context.html
otherwise the classloader locks the jar and no other process can deploy on top
of itMartin__ Disclaimer and
confidentiality note Everything in this e-mail and any attachments relates to
the official business of Sender. This transmission is of a confidential nature
and Sender does not endorse distribution to any party other than intended
recipient. Sender does not necessarily endorse content contained within this
transmission. > Date: Mon, 1 Sep 2008 18:30:35 +0100> From: [EMAIL PROTECTED]>
To: users@maven.apache.org> Subject: Re: How to configure a JBoss to link to
the webapp folder of a WAR project> > Many apologies!> My previous post had so
many tipos I had to repost it here... Will be more> careful in the future...
and type slower too! :-D> > Hi again,> > Following a tip from John Newman I
used this Eclipse plugin...> http://andrei.gmxhome.de/filesync/> > This allows
us to configure an automated file copy operation for specific> project folders
to whatever folder we want to.> So I configured the plugin to copy the webapp
folder to the exploded war> target folder and got the JSP/CSS/Images and JS
files hot code replace> working! (Thanks John!)> > This is fine except for
multi-module projects or dependent projects.> For these I still cannot get
hot-code replacement for classes since they are> bundled as JARs even if the
dependent projects are open in eclipse and> workspace resolution is active im
the Maven Eclipse Plugin.> > Has anyone gotten further with this approach or a
similar one?> > Thanks,> > On Mon, Sep 1, 2008 at 6:09 PM, Pedro Viegas <[EMAIL
PROTECTED]> wrote:> > > Hi again,> >> > Following a tip from John Newman I used
this Eclipse plugin...> > http://andrei.gmxhome.de/filesync/> >> > This allows
us to configure an automaed file copy operation for specific> > project folders
to whateve folder we want to.> > So I configured the plugin to copy the webapp
folder to the exploded wr> > target folder ad got the JSP/CS/Images/JS files
hot code replace working!> > (Thans John!)> >> > This is fine except for
multi-module projects or dependant projects.> > For these I still cannot get
hot-code replacement for classes since they> > are bundled as JARs even if the
dependant projects are open in eclipsed and> > wirkspace resolution is active
um the Maven Eclise Plugin.> >> > Has anyone gotten further with this approuch
or a similar one?> >> > Thanks,> >> >> >> > On Fri, Jul 11, 2008 at 11:21 AM,
Pedro Viegas <[EMAIL PROTECTED]>wrote:> >> >> Hi David,> >>> >> Sorry for to
confusing post.> >> I'll try to explain better.> >>> >> I have hot deployment
in place. It is working, just not in the best way.> >> What I have suceeded so
far:> >>> >> I have setup JBoss deploy URLs to search my> >>
${maven.project}/target/{projectWAR}> >> I deploy using mvn war:exploded so I
don't have to wait for the> >> compression phase.> >> For JBoss to accept a dir
like a WAR (that does not end in .war - maven's> >> notation), I have
configured the war plugin to create the exploded dir with> >> ".war" sufix.
Like so...> >>> >> > >> > >>
maven-war-plugin> >> > >>
> >>
${project.build.directory}/${project.build.finalName}.war >>
webappDirectory>> >> > >> > >> And this is what I
have.> >> All java classes get hot replaced by JBoss Eclipse plugin OK.> >>
JSP's are not!> >> To refresh JSP after I change them I issue a mvn
war:exploded each time I> >> want to.> >>> >> This is the best I got so far.
It's not a bad solution. It takes only a> >> few seconds for the projecto to
refresh the JSP. BUT this is a bit> >> workarround and having to set this up
for each project...> >>> >> Anyone has a better aprouch?> >>> >> Thanks,> >>>
>>> >> On Fri, Jul 11, 2008 at 12:35 AM, David Brown <[EMAIL PROTECTED]>> >>
wrote:> >>> >>> Hello Pedro, I'm not sure by your statements if you are using a
HOT> >>> deploy or not. In the case you are using a hot deploy try using an
exploded> >>> war under server/default/deploy and see if you see any
difference. The JSPs> >>> are compiled by the container once they are
Re: How to configure a JBoss to link to the webapp folder of a WAR project
Many apologies!
My previous post had so many tipos I had to repost it here... Will be more
careful in the future... and type slower too! :-D
Hi again,
Following a tip from John Newman I used this Eclipse plugin...
http://andrei.gmxhome.de/filesync/
This allows us to configure an automated file copy operation for specific
project folders to whatever folder we want to.
So I configured the plugin to copy the webapp folder to the exploded war
target folder and got the JSP/CSS/Images and JS files hot code replace
working! (Thanks John!)
This is fine except for multi-module projects or dependent projects.
For these I still cannot get hot-code replacement for classes since they are
bundled as JARs even if the dependent projects are open in eclipse and
workspace resolution is active im the Maven Eclipse Plugin.
Has anyone gotten further with this approach or a similar one?
Thanks,
On Mon, Sep 1, 2008 at 6:09 PM, Pedro Viegas <[EMAIL PROTECTED]> wrote:
> Hi again,
>
> Following a tip from John Newman I used this Eclipse plugin...
> http://andrei.gmxhome.de/filesync/
>
> This allows us to configure an automaed file copy operation for specific
> project folders to whateve folder we want to.
> So I configured the plugin to copy the webapp folder to the exploded wr
> target folder ad got the JSP/CS/Images/JS files hot code replace working!
> (Thans John!)
>
> This is fine except for multi-module projects or dependant projects.
> For these I still cannot get hot-code replacement for classes since they
> are bundled as JARs even if the dependant projects are open in eclipsed and
> wirkspace resolution is active um the Maven Eclise Plugin.
>
> Has anyone gotten further with this approuch or a similar one?
>
> Thanks,
>
>
>
> On Fri, Jul 11, 2008 at 11:21 AM, Pedro Viegas <[EMAIL PROTECTED]>wrote:
>
>> Hi David,
>>
>> Sorry for to confusing post.
>> I'll try to explain better.
>>
>> I have hot deployment in place. It is working, just not in the best way.
>> What I have suceeded so far:
>>
>> I have setup JBoss deploy URLs to search my
>> ${maven.project}/target/{projectWAR}
>> I deploy using mvn war:exploded so I don't have to wait for the
>> compression phase.
>> For JBoss to accept a dir like a WAR (that does not end in .war - maven's
>> notation), I have configured the war plugin to create the exploded dir with
>> ".war" sufix. Like so...
>>
>>
>>
>> maven-war-plugin
>>
>>
>> ${project.build.directory}/${project.build.finalName}.war> webappDirectory>
>>
>>
>> And this is what I have.
>> All java classes get hot replaced by JBoss Eclipse plugin OK.
>> JSP's are not!
>> To refresh JSP after I change them I issue a mvn war:exploded each time I
>> want to.
>>
>> This is the best I got so far. It's not a bad solution. It takes only a
>> few seconds for the projecto to refresh the JSP. BUT this is a bit
>> workarround and having to set this up for each project...
>>
>> Anyone has a better aprouch?
>>
>> Thanks,
>>
>>
>> On Fri, Jul 11, 2008 at 12:35 AM, David Brown <[EMAIL PROTECTED]>
>> wrote:
>>
>>> Hello Pedro, I'm not sure by your statements if you are using a HOT
>>> deploy or not. In the case you are using a hot deploy try using an exploded
>>> war under server/default/deploy and see if you see any difference. The JSPs
>>> are compiled by the container once they are invoked at the browser. As an
>>> experiment: create a second virtual JBoss (4.2.1/4.2.2) server on a port
>>> like 8989 that deploys a single JSP and see if you can get it to recompile.
>>> There are instructions int the JBoss /examples directory on how to do this.
>>> HTH, David.
>>> Pedro Viegas wrote ..
>>> > Hi all,
>>> >
>>> > I've been trying to build an environment for developing web
>>> applications
>>> > that generate WAR files with a productive debug/development process.
>>> > I'm using JBoss as the application server. Tomcat is a no go and Jetty
>>> has
>>> > issues with some bytecode APIs I use.
>>> >
>>> > All is working fine in the traditional way. I package the WAR, deploy
>>> it to
>>> > the server with the cargo plugin and test it.
>>> > Through JBoss Eclipse Plugin I have debug and hotcode replacement for
>>> java
>>> > classes, BUT not for JSPs!
>>> > How can I make JBoss aware of JSP/CSS/JS changes?
>>> >
>>> > I have seen a bunch of examples for Tomcat and Jetty to indicate a path
>>> to
>>> > the webapp folder.
>>> > For JBoss the only solution so far has always included building an
>>> exploded
>>> > WAR somewhere and point JBoss deploy URLs to it so it deploys them.
>>> > Even the solution of using the war:inplace is not functional since
>>> JBoss
>>> > deployer only scans WAR/JAR/EAR/etc files. A directory like
>>> > "src/main/webapp" is simply ignored.
>>> >
>>> > All I wanted to do was deploy the application through Maven a Eclipse
>>> > lanched debug JBoss instance and be able to change my JSP files and
>>> refresh
>>> > them on the browser.
>>> > As anyone been able to do this?
>>> >
>>> > Thanks,
>>> >
>>> > --
>
Re: How to configure a JBoss to link to the webapp folder of a WAR project
Hi Siarhei, Thanks for the tip. I haven't explored the WTP project before, only read about it very briefly. I will try this approach, even though it will surely force me to change a bit of my deployment and modules to comply to some rules I have read on the site. One question though, why did it put the m2eclipse plug in aside? Woudn't it help in the process? Are they incompatible? WTP projects and M2Projects projects I mean? I've been using the m2eclipse for some time and aside for a few bugs i got used to work arround i'm quite happy with it. Your experience (good or bad) would be appreciated to help me weight my options. Thanks, On Fri, Jul 11, 2008 at 10:05 PM, Siarhei Dudzin <[EMAIL PROTECTED]>wrote: > Hi, > > It pretty much 'just works'. I have a multi module eclipse (Eclipse Europa > version) projects with WTP 2 enabled in the maven-eclipse-plugin > configuration. > No m2eclipse plugin (tried it - but put it aside) - just > maven-eclipse-plugin. > > Just download sources of maven-eclipse-plugin - it has several test > projects > that can give you an idea for configuring your projects. > > JBoss Tools is built on top of WTP 2 and does exploded deployment right to > JBoss hot deploy directory. > > Regards, > Siarhei > > On Fri, Jul 11, 2008 at 12:14 PM, Pedro Viegas <[EMAIL PROTECTED]> > wrote: > > > Hi Siarhei, > > > > I too use JBoss tools and Eclipse Plugin. > > How did you set this up? > > > > Thanks, > > > > On Thu, Jul 10, 2008 at 8:08 PM, Siarhei Dudzin < > [EMAIL PROTECTED]> > > wrote: > > > > > What's wrong with JBoss Tools? We use maven-eclipse-plugin + JBoss > Tools, > > > works well so far... > > > > > > Siarhei > > > > > > On Thu, Jul 10, 2008 at 7:37 PM, Pedro Viegas <[EMAIL PROTECTED]> > > > wrote: > > > > > > > Hi all, > > > > > > > > I've been trying to build an environment for developing web > > applications > > > > that generate WAR files with a productive debug/development process. > > > > I'm using JBoss as the application server. Tomcat is a no go and > Jetty > > > has > > > > issues with some bytecode APIs I use. > > > > > > > > All is working fine in the traditional way. I package the WAR, deploy > > it > > > to > > > > the server with the cargo plugin and test it. > > > > Through JBoss Eclipse Plugin I have debug and hotcode replacement for > > > java > > > > classes, BUT not for JSPs! > > > > How can I make JBoss aware of JSP/CSS/JS changes? > > > > > > > > I have seen a bunch of examples for Tomcat and Jetty to indicate a > path > > > to > > > > the webapp folder. > > > > For JBoss the only solution so far has always included building an > > > exploded > > > > WAR somewhere and point JBoss deploy URLs to it so it deploys them. > > > > Even the solution of using the war:inplace is not functional since > > JBoss > > > > deployer only scans WAR/JAR/EAR/etc files. A directory like > > > > "src/main/webapp" is simply ignored. > > > > > > > > All I wanted to do was deploy the application through Maven a Eclipse > > > > lanched debug JBoss instance and be able to change my JSP files and > > > refresh > > > > them on the browser. > > > > As anyone been able to do this? > > > > > > > > Thanks, > > > > > > > > -- > > > > Pedro Viegas > > > > > > > > > > > > Walking on water and developing software > > > > from a specification are easy if both are > > > > frozen. > > > > - Edward V. Berard > > > > > > > > > > > > > > > -- > > Pedro Viegas > > > > > > Walking on water and developing software > > from a specification are easy if both are > > frozen. > > - Edward V. Berard > > > -- Pedro Viegas Walking on water and developing software from a specification are easy if both are frozen. - Edward V. Berard
Re: How to configure a JBoss to link to the webapp folder of a WAR project
Hi again,
Following a tip from John Newman I used this Eclipse plugin...
http://andrei.gmxhome.de/filesync/
This allows us to configure an automaed file copy operation for specific
project folders to whateve folder we want to.
So I configured the plugin to copy the webapp folder to the exploded wr
target folder ad got the JSP/CS/Images/JS files hot code replace working!
(Thans John!)
This is fine except for multi-module projects or dependant projects.
For these I still cannot get hot-code replacement for classes since they are
bundled as JARs even if the dependant projects are open in eclipsed and
wirkspace resolution is active um the Maven Eclise Plugin.
Has anyone gotten further with this approuch or a similar one?
Thanks,
On Fri, Jul 11, 2008 at 11:21 AM, Pedro Viegas <[EMAIL PROTECTED]> wrote:
> Hi David,
>
> Sorry for to confusing post.
> I'll try to explain better.
>
> I have hot deployment in place. It is working, just not in the best way.
> What I have suceeded so far:
>
> I have setup JBoss deploy URLs to search my
> ${maven.project}/target/{projectWAR}
> I deploy using mvn war:exploded so I don't have to wait for the compression
> phase.
> For JBoss to accept a dir like a WAR (that does not end in .war - maven's
> notation), I have configured the war plugin to create the exploded dir with
> ".war" sufix. Like so...
>
>
>
> maven-war-plugin
>
> ${project.build.directory}/${project.build.finalName}.war
>
>
>
> And this is what I have.
> All java classes get hot replaced by JBoss Eclipse plugin OK.
> JSP's are not!
> To refresh JSP after I change them I issue a mvn war:exploded each time I
> want to.
>
> This is the best I got so far. It's not a bad solution. It takes only a few
> seconds for the projecto to refresh the JSP. BUT this is a bit workarround
> and having to set this up for each project...
>
> Anyone has a better aprouch?
>
> Thanks,
>
>
> On Fri, Jul 11, 2008 at 12:35 AM, David Brown <[EMAIL PROTECTED]>
> wrote:
>
>> Hello Pedro, I'm not sure by your statements if you are using a HOT deploy
>> or not. In the case you are using a hot deploy try using an exploded war
>> under server/default/deploy and see if you see any difference. The JSPs are
>> compiled by the container once they are invoked at the browser. As an
>> experiment: create a second virtual JBoss (4.2.1/4.2.2) server on a port
>> like 8989 that deploys a single JSP and see if you can get it to recompile.
>> There are instructions int the JBoss /examples directory on how to do this.
>> HTH, David.
>> Pedro Viegas wrote ..
>> > Hi all,
>> >
>> > I've been trying to build an environment for developing web applications
>> > that generate WAR files with a productive debug/development process.
>> > I'm using JBoss as the application server. Tomcat is a no go and Jetty
>> has
>> > issues with some bytecode APIs I use.
>> >
>> > All is working fine in the traditional way. I package the WAR, deploy it
>> to
>> > the server with the cargo plugin and test it.
>> > Through JBoss Eclipse Plugin I have debug and hotcode replacement for
>> java
>> > classes, BUT not for JSPs!
>> > How can I make JBoss aware of JSP/CSS/JS changes?
>> >
>> > I have seen a bunch of examples for Tomcat and Jetty to indicate a path
>> to
>> > the webapp folder.
>> > For JBoss the only solution so far has always included building an
>> exploded
>> > WAR somewhere and point JBoss deploy URLs to it so it deploys them.
>> > Even the solution of using the war:inplace is not functional since JBoss
>> > deployer only scans WAR/JAR/EAR/etc files. A directory like
>> > "src/main/webapp" is simply ignored.
>> >
>> > All I wanted to do was deploy the application through Maven a Eclipse
>> > lanched debug JBoss instance and be able to change my JSP files and
>> refresh
>> > them on the browser.
>> > As anyone been able to do this?
>> >
>> > Thanks,
>> >
>> > --
>> > Pedro Viegas
>> >
>> >
>> > Walking on water and developing software
>> > from a specification are easy if both are
>> > frozen.
>> > - Edward V. Berard
>> Yet some, not wise, go to the other side of the globe, to barbarous and
>> unhealthy regions, and devote ten or twenty years, in that they may
>> live,-that is, keep comfortably warm,- and die in New England at last.
>>
>> Henry David Thoreau - Walden - 1845
>>
>>
>> -
>> To unsubscribe, e-mail: [EMAIL PROTECTED]
>> For additional commands, e-mail: [EMAIL PROTECTED]
>>
>>
>
>
> --
> Pedro Viegas
>
>
> Walking on water and developing software
> from a specification are easy if both are
> frozen.
> - Edward V. Berard
>
--
Pedro Viegas
Walking on water and developing software
from a specification are easy if both are
frozen.
- Edward V. Berard
Re: How to configure a JBoss to link to the webapp folder of a WAR project
Hi, It pretty much 'just works'. I have a multi module eclipse (Eclipse Europa version) projects with WTP 2 enabled in the maven-eclipse-plugin configuration. No m2eclipse plugin (tried it - but put it aside) - just maven-eclipse-plugin. Just download sources of maven-eclipse-plugin - it has several test projects that can give you an idea for configuring your projects. JBoss Tools is built on top of WTP 2 and does exploded deployment right to JBoss hot deploy directory. Regards, Siarhei On Fri, Jul 11, 2008 at 12:14 PM, Pedro Viegas <[EMAIL PROTECTED]> wrote: > Hi Siarhei, > > I too use JBoss tools and Eclipse Plugin. > How did you set this up? > > Thanks, > > On Thu, Jul 10, 2008 at 8:08 PM, Siarhei Dudzin <[EMAIL PROTECTED]> > wrote: > > > What's wrong with JBoss Tools? We use maven-eclipse-plugin + JBoss Tools, > > works well so far... > > > > Siarhei > > > > On Thu, Jul 10, 2008 at 7:37 PM, Pedro Viegas <[EMAIL PROTECTED]> > > wrote: > > > > > Hi all, > > > > > > I've been trying to build an environment for developing web > applications > > > that generate WAR files with a productive debug/development process. > > > I'm using JBoss as the application server. Tomcat is a no go and Jetty > > has > > > issues with some bytecode APIs I use. > > > > > > All is working fine in the traditional way. I package the WAR, deploy > it > > to > > > the server with the cargo plugin and test it. > > > Through JBoss Eclipse Plugin I have debug and hotcode replacement for > > java > > > classes, BUT not for JSPs! > > > How can I make JBoss aware of JSP/CSS/JS changes? > > > > > > I have seen a bunch of examples for Tomcat and Jetty to indicate a path > > to > > > the webapp folder. > > > For JBoss the only solution so far has always included building an > > exploded > > > WAR somewhere and point JBoss deploy URLs to it so it deploys them. > > > Even the solution of using the war:inplace is not functional since > JBoss > > > deployer only scans WAR/JAR/EAR/etc files. A directory like > > > "src/main/webapp" is simply ignored. > > > > > > All I wanted to do was deploy the application through Maven a Eclipse > > > lanched debug JBoss instance and be able to change my JSP files and > > refresh > > > them on the browser. > > > As anyone been able to do this? > > > > > > Thanks, > > > > > > -- > > > Pedro Viegas > > > > > > > > > Walking on water and developing software > > > from a specification are easy if both are > > > frozen. > > > - Edward V. Berard > > > > > > > > > -- > Pedro Viegas > > > Walking on water and developing software > from a specification are easy if both are > frozen. > - Edward V. Berard >
Re: How to configure a JBoss to link to the webapp folder of a WAR project
By the way... one more thing...
There is also the option of using the:
mvn war:inplace
This should solve all my problems... except that I cannot change the webapp
folder to webapp.war! And since the webapp folder does not terminate with a
".war" extension JBoss does not deploy it. Tries to but issues a
"deployer: null" error message, since it does not have a deployer for null
extension files.
Am I barking at the wrong tree here?
Thanks,
On Fri, Jul 11, 2008 at 11:21 AM, Pedro Viegas <[EMAIL PROTECTED]> wrote:
> Hi David,
>
> Sorry for to confusing post.
> I'll try to explain better.
>
> I have hot deployment in place. It is working, just not in the best way.
> What I have suceeded so far:
>
> I have setup JBoss deploy URLs to search my
> ${maven.project}/target/{projectWAR}
> I deploy using mvn war:exploded so I don't have to wait for the compression
> phase.
> For JBoss to accept a dir like a WAR (that does not end in .war - maven's
> notation), I have configured the war plugin to create the exploded dir with
> ".war" sufix. Like so...
>
>
>
> maven-war-plugin
>
> ${project.build.directory}/${project.build.finalName}.war
>
>
>
> And this is what I have.
> All java classes get hot replaced by JBoss Eclipse plugin OK.
> JSP's are not!
> To refresh JSP after I change them I issue a mvn war:exploded each time I
> want to.
>
> This is the best I got so far. It's not a bad solution. It takes only a few
> seconds for the projecto to refresh the JSP. BUT this is a bit workarround
> and having to set this up for each project...
>
> Anyone has a better aprouch?
>
> Thanks,
>
>
> On Fri, Jul 11, 2008 at 12:35 AM, David Brown <[EMAIL PROTECTED]>
> wrote:
>
>> Hello Pedro, I'm not sure by your statements if you are using a HOT deploy
>> or not. In the case you are using a hot deploy try using an exploded war
>> under server/default/deploy and see if you see any difference. The JSPs are
>> compiled by the container once they are invoked at the browser. As an
>> experiment: create a second virtual JBoss (4.2.1/4.2.2) server on a port
>> like 8989 that deploys a single JSP and see if you can get it to recompile.
>> There are instructions int the JBoss /examples directory on how to do this.
>> HTH, David.
>> Pedro Viegas wrote ..
>> > Hi all,
>> >
>> > I've been trying to build an environment for developing web applications
>> > that generate WAR files with a productive debug/development process.
>> > I'm using JBoss as the application server. Tomcat is a no go and Jetty
>> has
>> > issues with some bytecode APIs I use.
>> >
>> > All is working fine in the traditional way. I package the WAR, deploy it
>> to
>> > the server with the cargo plugin and test it.
>> > Through JBoss Eclipse Plugin I have debug and hotcode replacement for
>> java
>> > classes, BUT not for JSPs!
>> > How can I make JBoss aware of JSP/CSS/JS changes?
>> >
>> > I have seen a bunch of examples for Tomcat and Jetty to indicate a path
>> to
>> > the webapp folder.
>> > For JBoss the only solution so far has always included building an
>> exploded
>> > WAR somewhere and point JBoss deploy URLs to it so it deploys them.
>> > Even the solution of using the war:inplace is not functional since JBoss
>> > deployer only scans WAR/JAR/EAR/etc files. A directory like
>> > "src/main/webapp" is simply ignored.
>> >
>> > All I wanted to do was deploy the application through Maven a Eclipse
>> > lanched debug JBoss instance and be able to change my JSP files and
>> refresh
>> > them on the browser.
>> > As anyone been able to do this?
>> >
>> > Thanks,
>> >
>> > --
>> > Pedro Viegas
>> >
>> >
>> > Walking on water and developing software
>> > from a specification are easy if both are
>> > frozen.
>> > - Edward V. Berard
>> Yet some, not wise, go to the other side of the globe, to barbarous and
>> unhealthy regions, and devote ten or twenty years, in that they may
>> live,-that is, keep comfortably warm,- and die in New England at last.
>>
>> Henry David Thoreau - Walden - 1845
>>
>>
>> -
>> To unsubscribe, e-mail: [EMAIL PROTECTED]
>> For additional commands, e-mail: [EMAIL PROTECTED]
>>
>>
>
>
> --
> Pedro Viegas
>
>
> Walking on water and developing software
> from a specification are easy if both are
> frozen.
> - Edward V. Berard
>
--
Pedro Viegas
Walking on water and developing software
from a specification are easy if both are
frozen.
- Edward V. Berard
Re: How to configure a JBoss to link to the webapp folder of a WAR project
Hi David,
Sorry for to confusing post.
I'll try to explain better.
I have hot deployment in place. It is working, just not in the best way.
What I have suceeded so far:
I have setup JBoss deploy URLs to search my
${maven.project}/target/{projectWAR}
I deploy using mvn war:exploded so I don't have to wait for the compression
phase.
For JBoss to accept a dir like a WAR (that does not end in .war - maven's
notation), I have configured the war plugin to create the exploded dir with
".war" sufix. Like so...
maven-war-plugin
${project.build.directory}/${project.build.finalName}.war
And this is what I have.
All java classes get hot replaced by JBoss Eclipse plugin OK.
JSP's are not!
To refresh JSP after I change them I issue a mvn war:exploded each time I
want to.
This is the best I got so far. It's not a bad solution. It takes only a few
seconds for the projecto to refresh the JSP. BUT this is a bit workarround
and having to set this up for each project...
Anyone has a better aprouch?
Thanks,
On Fri, Jul 11, 2008 at 12:35 AM, David Brown <[EMAIL PROTECTED]>
wrote:
> Hello Pedro, I'm not sure by your statements if you are using a HOT deploy
> or not. In the case you are using a hot deploy try using an exploded war
> under server/default/deploy and see if you see any difference. The JSPs are
> compiled by the container once they are invoked at the browser. As an
> experiment: create a second virtual JBoss (4.2.1/4.2.2) server on a port
> like 8989 that deploys a single JSP and see if you can get it to recompile.
> There are instructions int the JBoss /examples directory on how to do this.
> HTH, David.
> Pedro Viegas wrote ..
> > Hi all,
> >
> > I've been trying to build an environment for developing web applications
> > that generate WAR files with a productive debug/development process.
> > I'm using JBoss as the application server. Tomcat is a no go and Jetty
> has
> > issues with some bytecode APIs I use.
> >
> > All is working fine in the traditional way. I package the WAR, deploy it
> to
> > the server with the cargo plugin and test it.
> > Through JBoss Eclipse Plugin I have debug and hotcode replacement for
> java
> > classes, BUT not for JSPs!
> > How can I make JBoss aware of JSP/CSS/JS changes?
> >
> > I have seen a bunch of examples for Tomcat and Jetty to indicate a path
> to
> > the webapp folder.
> > For JBoss the only solution so far has always included building an
> exploded
> > WAR somewhere and point JBoss deploy URLs to it so it deploys them.
> > Even the solution of using the war:inplace is not functional since JBoss
> > deployer only scans WAR/JAR/EAR/etc files. A directory like
> > "src/main/webapp" is simply ignored.
> >
> > All I wanted to do was deploy the application through Maven a Eclipse
> > lanched debug JBoss instance and be able to change my JSP files and
> refresh
> > them on the browser.
> > As anyone been able to do this?
> >
> > Thanks,
> >
> > --
> > Pedro Viegas
> >
> >
> > Walking on water and developing software
> > from a specification are easy if both are
> > frozen.
> > - Edward V. Berard
> Yet some, not wise, go to the other side of the globe, to barbarous and
> unhealthy regions, and devote ten or twenty years, in that they may
> live,-that is, keep comfortably warm,- and die in New England at last.
>
> Henry David Thoreau - Walden - 1845
>
>
> -
> To unsubscribe, e-mail: [EMAIL PROTECTED]
> For additional commands, e-mail: [EMAIL PROTECTED]
>
>
--
Pedro Viegas
Walking on water and developing software
from a specification are easy if both are
frozen.
- Edward V. Berard
Re: How to configure a JBoss to link to the webapp folder of a WAR project
Hi Siarhei, I too use JBoss tools and Eclipse Plugin. How did you set this up? Thanks, On Thu, Jul 10, 2008 at 8:08 PM, Siarhei Dudzin <[EMAIL PROTECTED]> wrote: > What's wrong with JBoss Tools? We use maven-eclipse-plugin + JBoss Tools, > works well so far... > > Siarhei > > On Thu, Jul 10, 2008 at 7:37 PM, Pedro Viegas <[EMAIL PROTECTED]> > wrote: > > > Hi all, > > > > I've been trying to build an environment for developing web applications > > that generate WAR files with a productive debug/development process. > > I'm using JBoss as the application server. Tomcat is a no go and Jetty > has > > issues with some bytecode APIs I use. > > > > All is working fine in the traditional way. I package the WAR, deploy it > to > > the server with the cargo plugin and test it. > > Through JBoss Eclipse Plugin I have debug and hotcode replacement for > java > > classes, BUT not for JSPs! > > How can I make JBoss aware of JSP/CSS/JS changes? > > > > I have seen a bunch of examples for Tomcat and Jetty to indicate a path > to > > the webapp folder. > > For JBoss the only solution so far has always included building an > exploded > > WAR somewhere and point JBoss deploy URLs to it so it deploys them. > > Even the solution of using the war:inplace is not functional since JBoss > > deployer only scans WAR/JAR/EAR/etc files. A directory like > > "src/main/webapp" is simply ignored. > > > > All I wanted to do was deploy the application through Maven a Eclipse > > lanched debug JBoss instance and be able to change my JSP files and > refresh > > them on the browser. > > As anyone been able to do this? > > > > Thanks, > > > > -- > > Pedro Viegas > > > > > > Walking on water and developing software > > from a specification are easy if both are > > frozen. > > - Edward V. Berard > > > -- Pedro Viegas Walking on water and developing software from a specification are easy if both are frozen. - Edward V. Berard
Re: How to configure a JBoss to link to the webapp folder of a WAR project
Hello Pedro, I'm not sure by your statements if you are using a HOT deploy or not. In the case you are using a hot deploy try using an exploded war under server/default/deploy and see if you see any difference. The JSPs are compiled by the container once they are invoked at the browser. As an experiment: create a second virtual JBoss (4.2.1/4.2.2) server on a port like 8989 that deploys a single JSP and see if you can get it to recompile. There are instructions int the JBoss /examples directory on how to do this. HTH, David. Pedro Viegas wrote .. > Hi all, > > I've been trying to build an environment for developing web applications > that generate WAR files with a productive debug/development process. > I'm using JBoss as the application server. Tomcat is a no go and Jetty has > issues with some bytecode APIs I use. > > All is working fine in the traditional way. I package the WAR, deploy it to > the server with the cargo plugin and test it. > Through JBoss Eclipse Plugin I have debug and hotcode replacement for java > classes, BUT not for JSPs! > How can I make JBoss aware of JSP/CSS/JS changes? > > I have seen a bunch of examples for Tomcat and Jetty to indicate a path to > the webapp folder. > For JBoss the only solution so far has always included building an exploded > WAR somewhere and point JBoss deploy URLs to it so it deploys them. > Even the solution of using the war:inplace is not functional since JBoss > deployer only scans WAR/JAR/EAR/etc files. A directory like > "src/main/webapp" is simply ignored. > > All I wanted to do was deploy the application through Maven a Eclipse > lanched debug JBoss instance and be able to change my JSP files and refresh > them on the browser. > As anyone been able to do this? > > Thanks, > > -- > Pedro Viegas > > > Walking on water and developing software > from a specification are easy if both are > frozen. > - Edward V. Berard Yet some, not wise, go to the other side of the globe, to barbarous and unhealthy regions, and devote ten or twenty years, in that they may live,-that is, keep comfortably warm,- and die in New England at last. Henry David Thoreau - Walden - 1845 - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: How to configure a JBoss to link to the webapp folder of a WAR project
What's wrong with JBoss Tools? We use maven-eclipse-plugin + JBoss Tools, works well so far... Siarhei On Thu, Jul 10, 2008 at 7:37 PM, Pedro Viegas <[EMAIL PROTECTED]> wrote: > Hi all, > > I've been trying to build an environment for developing web applications > that generate WAR files with a productive debug/development process. > I'm using JBoss as the application server. Tomcat is a no go and Jetty has > issues with some bytecode APIs I use. > > All is working fine in the traditional way. I package the WAR, deploy it to > the server with the cargo plugin and test it. > Through JBoss Eclipse Plugin I have debug and hotcode replacement for java > classes, BUT not for JSPs! > How can I make JBoss aware of JSP/CSS/JS changes? > > I have seen a bunch of examples for Tomcat and Jetty to indicate a path to > the webapp folder. > For JBoss the only solution so far has always included building an exploded > WAR somewhere and point JBoss deploy URLs to it so it deploys them. > Even the solution of using the war:inplace is not functional since JBoss > deployer only scans WAR/JAR/EAR/etc files. A directory like > "src/main/webapp" is simply ignored. > > All I wanted to do was deploy the application through Maven a Eclipse > lanched debug JBoss instance and be able to change my JSP files and refresh > them on the browser. > As anyone been able to do this? > > Thanks, > > -- > Pedro Viegas > > > Walking on water and developing software > from a specification are easy if both are > frozen. > - Edward V. Berard >
How to configure a JBoss to link to the webapp folder of a WAR project
Hi all, I've been trying to build an environment for developing web applications that generate WAR files with a productive debug/development process. I'm using JBoss as the application server. Tomcat is a no go and Jetty has issues with some bytecode APIs I use. All is working fine in the traditional way. I package the WAR, deploy it to the server with the cargo plugin and test it. Through JBoss Eclipse Plugin I have debug and hotcode replacement for java classes, BUT not for JSPs! How can I make JBoss aware of JSP/CSS/JS changes? I have seen a bunch of examples for Tomcat and Jetty to indicate a path to the webapp folder. For JBoss the only solution so far has always included building an exploded WAR somewhere and point JBoss deploy URLs to it so it deploys them. Even the solution of using the war:inplace is not functional since JBoss deployer only scans WAR/JAR/EAR/etc files. A directory like "src/main/webapp" is simply ignored. All I wanted to do was deploy the application through Maven a Eclipse lanched debug JBoss instance and be able to change my JSP files and refresh them on the browser. As anyone been able to do this? Thanks, -- Pedro Viegas Walking on water and developing software from a specification are easy if both are frozen. - Edward V. Berard
RE: how to configure a mirror?
You might try to avoid the mirror all together. Instead of mirroring central,
change the url in a profile to be what you want it to be. There's no good way
to change the mirror url if the property didn't work.
-Original Message-
From: Stephane Nicoll [mailto:[EMAIL PROTECTED]
Sent: Friday, April 04, 2008 7:25 AM
To: Maven Users List
Subject: how to configure a mirror?
Hi,
I am trying to configure a mirror. We have development teams around
the world so I would like to be able to configure the central mirror
with a property that would be define in a profile for instance
(developers may travel around so they need to use the closest mirror).
We can't set a mirror in a profile.
I tried to do something like
internal
Releases - Liege repository
${internal.url}
central
And define internal.url in a profile that is in the activeProfiles
section of the settings but it did not replaced the value.
Any solution to this problem?
Thanks,
Stéphane
--
Large Systems Suck: This rule is 100% transitive. If you build one,
you suck" -- S.Yegge
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
