27;t had a single problem with it.
-Alex
- Original Message -
From: "Kevin D. Clark" <[EMAIL PROTECTED]>
To: "Hewitt Tech" <[EMAIL PROTECTED]>
Cc:
Sent: Sunday, June 19, 2005 2:21 PM
Subject: Re: Causes of router/switch hangs?
>
> "Hewitt T
Recently I ran into two similar situations (or at least similar symptoms at
two different client sites. In one case a LinkSys 24 port switch would
intermittently hang. Troubleshooting revealed that one particular connection
seemed to be causing the problem and the cable attached to the port was
fai
- Original Message -
From: "Brian" <[EMAIL PROTECTED]>
To: "'Hewitt Tech'" <[EMAIL PROTECTED]>;
Sent: Sunday, June 12, 2005 9:47 PM
Subject: RE: Recommendations for webcasting/video conferenciing?
> http://www.webex.com
>
> Works w
I have a new client that wanted to setup a webcast from his hotel room. I
explained to him that it is necessary to have control of the firewall/router
so that the appropriate ports can be forwarded and that it was unlikely that
the hotel chain would be that cooperative. Sure enough although the fo
of the
target Windows box.
- Original Message -
From: "Dan Jenkins" <[EMAIL PROTECTED]>
To: "Hewitt Tech" <[EMAIL PROTECTED]>
Cc: "GNHLUG"
Sent: Wednesday, June 01, 2005 10:52 PM
Subject: Re: Samba problem? Macintosh (Panther) can't see Windows PCs
>
I was asked to look into a client's problem where they have a mixed
environment of fairly new Macs and Windows XP boxes. Apparently a network
peer to peer sharing setup was done and one particular iMac was happily
sharing it's files and accessing Windows XP shares for several days. Then
the Mac got
I'm sure I share this trait with a lot of the folks on this list but I've
had an almost lifelong compulsion to buy books. In my case I sometimes have
2 or 3 different editions of the same technical book. I could advertise a
few of these on the list (free to the takers) but I was wondering if anyone
Purely a hardware question: has anyone run across a Dell 2650 server that
flashes "PCI Parity Error E13F4" on the PC Health LED? This server
occasionally scrolls this error across the front panel. Removing power and
then plugging the power cord back in seems to clear the error which happens
intermi
You should probably confine yourself to IA32 processors since the vast
majority of Xeons you will encounter will be strictly IA32.
-Alex
- Original Message -
From: "Kenneth E. Lussier" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, January 26, 2005 2:20 PM
Subject: Xeon
/business/bss/products/server/64-bit/index.htm?iid=hwd_64bitpage+64bit_rc2&;
- Original Message -
From: "Hewitt Tech" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, January 26, 2005 2:36 PM
Subject: Re: Xeon
> The IA64 architecture refers to the
The IA64 architecture refers to the Itanium processors. The IA32
architecture would cover most Xeon processors although there is a 64 bit
extended model that has an almost identical instruction set to the AMD-64
family of processors.
-Alex
- Original Message -
From: "Kenneth E. Lussier"
I've put together a couple of AMD-64 based systems and in general they feel
"fast". The problem with that kind of an observation is that there's really
no data behind it. Recently Infoworld reviewed an IBM Opteron (the
commercial version of the AMD-64 family) and claimed that their testing
showed t
There is supposedly an Iwill SFF dual Opteron system but it either isn't
available or isn't ready for prime time yet.
However, how about an Antec Minuet case (16.8" x 12.75" x 3.8") which can
take a Micro-ATX motherboard? Tyan makes a model Tiger S2723GNN which
supports two Xeon processors. The A
Spectra Access in Manchester provides wireless systems. They recently did
the Manchester Airport and supply commercial connections in the Manchester
area.
http://www.spectraaccess.com/
-Alex
- Original Message -
From: "Ray Cote" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday
- Original Message -
From: "Greg Rundlett" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Cc: "Hewitt Tech" <[EMAIL PROTECTED]>;
<[EMAIL PROTECTED]>
Sent: Wednesday, November 10, 2004 7:05 PM
Subject: Re: Why Intuit should have an Open Source v
The article at the following URL discusses upcoming plans for Microsoft to
add a small business financial application to their Office suite.
http://www.infoworld.com/article/04/11/05/HNsmboffice_1.html
-Alex
___
gnhlug-discuss mailing list
[EMAIL PROT
A few weeks ago a client was having problems with his Dell system and
specifically he had file system corruption (Windows XP Home) which required
a repair install of his OS. I noticed that the event logger logged a "disk
bad block" event about the time of the corruption of his file system and I
rec
- Original Message -
From: <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Wednesday, September 29, 2004 7:14 AM
Subject: Re: BitTorrent and Comcast?
.
.
.
> Okay, take into account that most internet users never
- Original Message -
From: "Benjamin Scott" <[EMAIL PROTECTED]>
To: "Greater NH Linux User Group" <[EMAIL PROTECTED]>
Sent: Tuesday, September 28, 2004 8:10 PM
Subject: Re: BitTorrent and Comcast?
> On Tue, 28 Sep 2004, at 3:36pm, [EMAIL PROTECTED] wrote:
> > The scammers should be track
- Original Message -
From: "Jeff Kinz" <[EMAIL PROTECTED]>
To: "Greater NH Linux User Group" <[EMAIL PROTECTED]>
Sent: Monday, September 27, 2004 10:44 PM
Subject: Re: BitTorrent and Comcast?
.
.
> its a bit like asking a police officer, exactly how many M
- Original Message -
From: "Dan Jenkins" <[EMAIL PROTECTED]>
To: "Jeff Macdonald" <[EMAIL PROTECTED]>
Cc: "GNHLUG" <[EMAIL PROTECTED]>
Sent: Thursday, August 26, 2004 11:18 PM
Subject: Re: pcmcia vs pccard vs cardbus
> Jeff Macdonald wrote:
> > I know that pccard is the same is pcmcia (
- Original Message -
From: "Greg Rundlett" <[EMAIL PROTECTED]>
To: "discuss" <[EMAIL PROTECTED]>
Sent: Saturday, August 14, 2004 1:07 AM
Subject: rant on pathetic example of Microsoft FUD
> I was developing a CD-ROM product which contains multiple Microsoft
> PowerPointless (tm) present
Breaking news: if you'd like to hear how Iraqi's in the "New Iraq" are using
Linux, tune in...
-Alex
P.S. Via Bill Sconce (who just walked through the door)
___
gnhlug-discuss mailing list
[EMAIL PROTECTED]
http://mail.gnhlug.org/mailman/listinfo/gnhlu
- Original Message -
From: "Bruce Dawson" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, June 15, 2004 11:14 AM
Subject: Re: Recommendations for VPN end point appliances?
On Tue, 2004-06-15 at 09:38, Hewitt Tech wrote:
> These will be the last Link
- Original Message -
From: <[EMAIL PROTECTED]>
To: "Greater NH Linux User Group" <[EMAIL PROTECTED]>
Sent: Sunday, June 13, 2004 1:14 PM
Subject: Re: Recommendations for VPN end point appliances?
> On Fri, 11 Jun 2004, at 10:51pm, [EMAIL PROTECTED] wrote:
> > ... does anyone have any re
- Original Message -
From: "Chris" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Sunday, June 13, 2004 10:07 PM
Subject: Re: Recommendations for VPN end point appliances?
>
>
> [EMAIL PROTECTED] wrote:
> >
> > On Sun, 13 Jun 2004, at 9:40pm, [EMAIL PROTECTED] wrote:
> > >> ... shared
SonicWall certainly has plenty to choose from. I've never heard anything bad
about their products now that I think about it.
-Alex
- Original Message -
From: "Brian" <[EMAIL PROTECTED]>
To: "Hewitt Tech" <[EMAIL PROTECTED]>; "Greater NH
Since we're on the topic of network hardware recommendations - does anyone
have any recommendations for VPN end point appliances. I had used some 3Com
3CR-856 firewall/router/VPN end points with good results but 3Com has
discontinued them. I ordered a pair of BEFSX41 LinkSys routers but haven't
bee
One thing that might affect which tool you decide to use - if you need an
intrusion detection system, you might want to use snort. I've used Ethereal
in an all windows environment to track down worms/trojans. In that scenario
you might only need 5 or 10 seconds worth of traffic. But if you are look
http://www.strangehorizons.com/index.pl?Contents=/2004/20040405/badger.shtml
___
gnhlug-discuss mailing list
[EMAIL PROTECTED]
http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss
t from my web site on the main
page at www.alexhewitt.com .
-Alex
- Original Message -
From: "Cole Tuininga" <[EMAIL PROTECTED]>
To: "GNHLUG List" <[EMAIL PROTECTED]>
Sent: Monday, March 29, 2004 3:21 PM
Subject: Re: Can this be protected?
> On Mon,
When I picked up this tool a while back it was free. Now the author wants
$10 for it (which seems reasonable).
-Alex
- Original Message -
From: "Hewitt Tech" <[EMAIL PROTECTED]>
To: "Greater NH Linux User Group" <[EMAIL PROTECTED]>
Sent: Monday, March 2
There's a nice little tool located at: http://hixus.com that does a good job
of obfuscating an email address. It generates javascript that can be
embedded in your web page. I have found that the scam artists seem to
actually read email addresses and write them down or otherwise add them to
their ta
- Original Message -
From: <[EMAIL PROTECTED]>
To: "Greater NH Linux User Group" <[EMAIL PROTECTED]>
Sent: Thursday, March 11, 2004 1:22 PM
Subject: Re: p2p, anonymity and security
> On Thu, 11 Mar 2004, at 12:04am, [EMAIL PROTECTED] wrote:
> > So, my first question...Is a Linksys Route
This story claims that AT&T disclaimed ownership of derivative UNIX code and
SCO's lawsuits may fall apart...
http://www.computerworld.com/softwaretopics/os/unix/story/0,10801,90205,00.html
-Alex
___
gnhlug-discuss mailing list
[EMAIL PROTECTED]
http:/
ginal Message -
From: "Jerry Feldman" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Saturday, January 31, 2004 2:11 PM
Subject: Re: Using linux to clone a Windows ME disk?
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Sat, 31 Jan 2004 12:34:45 -0500
"Hewitt
I realize you wanted to do this with Open Source tools but the Powerquest
Drive Image tool will do this quickly and reliably. In a UNIX environment,
I've cloned disks using dd but it gets complicated when you mix in Microsoft
formats. Not only that but you probably want to make the new 60 gig drive
One other thing you might look at - does this BIOS have a virus check? If
so, turning off the virus check might allow it to make it into the Linux
bootstrap.
-Alex
P.S. Just a swag ;^)
- Original Message -
From: "Michael ODonnell" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday
Title: Message
Or you can do what I do - subscribe to both!
;^)
-Alex
- Original Message -
From:
Sharpe,
Richard
To: NHLUG
([EMAIL PROTECTED])
Sent: Monday, December 29, 2003 8:48
AM
Subject: RE: A good LINUX magazine
?
Thanks, I picked
up a copy o
I like Linux Magazine which seems to have a decent signal to noise ratio.
Their web site is:
www.linuxmagazine.com
-Alex
- Original Message -
From: "Erik Price" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Cc: "GNHLUG" <[EMAIL PROTECTED]>
Sent: Thursday, December 25, 2003 6:12 PM
Subject
I have a client in Merrimack New Hampshire who would like something faster
than dial-up. Their offices are located on route 3. Does anyone know who, if
anyone, might provide fast internet? I checked their phone number and
according to DSL Reports, they're just over 18k feet from the CO.
-Alex
___
I think you may find that if you had the "Basic" installation and you didn't
register your cable modem using the programs on the CD they left with you,
that you won't be able to get a DHCP served address. The way it works is
that you setup a proxy address for your computer and then using a web page
Thanks Bill. As luck would have it I had one of the affected routers in my
inventory. I downloaded the latest firmware which according to the article
you referenced should fix the problem.
-Alex
- Original Message -
From: "Bill Mullen" <[EMAIL PROTECTED]>
To: "GNHLUG Discussion List" <[E
It's been too long since I had the pleasure of hearing Bill Sconce deliver a
technical presentation. A number of years ago, when Bill worked for DEC, his
technical presentations at the annual customer conferences were widely
anticipated and heavily attended. For those of you who don't know, Bill
wo
I'm not sure what your message means. The problem Comcast has with Linux is
that they don't have an easy way to re-configure email clients on that
platform. Any Linux system connected to Comcast should continue to work
except that Linux users will need to manually re-configure their email (not
a hu
: "Richard Sharpe" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Cc: "Hewitt Tech" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
Sent: Sunday, June 08, 2003 7:09 AM
Subject: Re: PDA Suggestions
After think about this, I don't think I want a Windose PDA, how
Check out:
http://www.handhelds.org/projects/h1900.html
Look's like there is some support with more planned.
-Alex
- Original Message -
From: "Richard A Sharpe" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>; "'Erik Price'" <[EMAIL PROTECTED]>
Cc: "'GNHLUG List'" <[EMAIL PROTECTED]>
Sent:
I guess I have to concur - I bought a Zaurus 5600 because I wanted one. I've
owned a couple of Palm type devices, a Compaq iPaq (Pocket PC) and now the
Zaurus. The Zaurus as you might suspect, is a *very* powerful machine. I
will in fact be replacing a laptop with it. But if your need is for a
clas
constant activity.
-Alex
P.S. I'm quite willing to put up with low battery life given the things I
can so easily do with the machine. The output of the charging unit is 5 V so
it should be easy to hang some kind of fat battery off it if necessary.
- Original Message -
From: <[E
I don't remember if anyone suggested this but I've seen some pretty odd
behavior when a system simply runs out of disk space. If for example root is
full, you usually can't log in or start many programs. Of course if you can
get the system to come up single user with the disks in read only mode you
I just bought a Zaurus SL-5600 PDA for use in my business. My primary use
will be connecting to client's LANs and making adjustments to routers and
gateways. The 5600 has 96 megs of RAM and includes both Compact Flash and
Secure Digital media slots. One of the reasons I bought at this time was
that
Thanks Jim. With 20/20 hindsight I think this problem should have been
easier but...
-Alex
- Original Message -
From: <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, April 02, 2003 5:22 PM
Subject: Re: Dumb networking question...
Alex (Hewitt Tech) wrote:
>
One other piece of the puzzle fell into place. Although I had VPN
connections going from one gateway to the other, I couldn't ping addresses
for machines behind the other gateway. Further perusal of the 3 Com
documents (not included with the device but on their web site) showed that
the LANs needed
This is true for the 3Com device as well. It autosenses all ports including
the WAN port and the LAN ports... This would explain why my VPN tunnel
connected no matter whether I had a straight through or a crossover cable.
-alex
- Original Message -
From: "Derek Martin" <[EMAIL PROTECTED]>
Believe it or not, disk I/O bandwidth is often the culprit in situations
like this. Try moving the same amount of data from disk to disk and see what
happens. Make sure you invalidate the cache if you do this in a loop to
overcome the effects of extensive read caching. I think you'll find that
you
ir IP addresses.
- Original Message -
From: "Ben Boulanger" <[EMAIL PROTECTED]>
To: "Hewitt Tech" <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Tuesday, April 01, 2003 9:20 AM
Subject: Re: Dumb networking question...
On Mon, 31 Mar 2003, Hewit
cross-over cable.
-Alex
- Original Message -
From: "Hewitt Tech" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, April 01, 2003 7:36 AM
Subject: Re: Dumb networking question...
I agree that two of these devices aren't entirely necessary unless we want
will work using just
one gateway box.
-Alex
- Original Message -
From: "Derek Martin" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, March 31, 2003 11:21 PM
Subject: Re: Dumb networking question...
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Mon, Mar
I'm staging a network setup for a client and I have the following:
2 x 3Com 3cr856-95 Cable/DSL Secure Gateways (these are 4 port switched hubs
with built-in DHCP servers and PPTP/IPsec servers
I've hooked the two gateways directly to each other using their WAN ports -
they do see each other as 1
A business group that I belong to wants to be able to use a mail list
server. I know that Yahoo provides a free list server but was wondering if
anyone knew of any others. Yahoo pays for their "free" servers with
advertisements that get attached to each message. Worse, they make you sign
up for the
Amazon.com has the new model for $499. They say it's being released March
21st and they are taking pre-orders now. I think the new model is the one I
might buy. It looks like a decent system. I have a Compaq iPaq handheld
(model 3670). I tried running Linux on it and succeeded in getting it
install
Oops! They're selling the 5500 for less. The new 5600 will be quite a bit
more...
-Alex
- Original Message -
From: "Jefferson Kirkland" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, March 17, 2003 9:18 PM
Subject: Cheap price for Sharp Zaurus!
Everyone,
I saw posted
Cute... walked into that one ;^)
-Alex
- Original Message -
From: "Michael O'Donnell" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, March 14, 2003 8:10 PM
Subject: Re: Yet another reason to avoid Microsoft server products...
>The more I see of Microsoft's stuff, the
>wor
I just installed a new Intel based server for a client and ran into
something both interesting and disturbing. Enterprise software vendors have
always (or at least tried) placed a high premium on backwards compatibility.
When for example Digital Equipment Corporation released a new version of
their
My piece of (fill in the cuss word of your choice) Compaq Presario laptop is
starting to break down around the hinges of the cover. This system has been
a series of disappointments - can't run Linux easily, doesn't support 32 bit
cardbus cards, battery croaked early. I just discovered when I called
An acquaintance sent me an email asking to have her email address changed.
It seems that a spammer used her email address as a return address (I guess
that's sometimes called spoofing) and of course she's getting deluged with
angry responses from the spammer's activities. I pointed her to some of t
A bit less than 17 years ago the nobel prize winning physicist Richard
Feynman added an addendum to the Roger's commission investigation of the
Challenger space shuttle disaster. It's worth re-visiting Feynman's report.
You can find a copy at:
http://www.uky.edu/~holler/msc/roles/feynrept.html
-A
st.
-Alex
- Original Message -
From: "Tom Buskey" <[EMAIL PROTECTED]>
To: "Hewitt Tech" <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Friday, January 31, 2003 1:58 PM
Subject: Re: Low cost national V92 ISPs?
"Hewitt Tech" said:
>likely go
World is out for me. Although they might otherwise be a worthy ISP, they
have no V92 rated connections available in New Hampshire. Moreover, I think
they need software at their end to support V92 (the call waiting part)
although I'm not sure about that. Highstream.net claims that you can answer
cal
I used one of their free accounts about a year ago when I was working for a
certain large Hightech company who didn't allow any outgoing modem
connections. I needed to access a customer system and the quickest way to do
it was to dial out over my office telephone line and I needed something with
PP
I'm looking for a dialup ISP preferrably that has V.92 access
numbers/support and hopefully $10/month or less. Anyone using any of these
ISPs? A couple that I've looked at: Netzero, Highstream.net. I mainly need
this when I'm on the road and to back up my high speed connection.
-Alex
Interesting that you mention "onerous restrictions". A friend of mine up in
Canada was about to subscribe to a high speed service in Halifax, Nova
Scotia, where he lives and I asked him to get the details so I could advise
him. The local phone company there supplies a DSL connection with a 3 mbs
do
I meant to send this to the list, sorry you'll see it twice Travis ;^)
-Alex
- Original Message -
From: "Hewitt Tech" <[EMAIL PROTECTED]>
To: "Travis Roy" <[EMAIL PROTECTED]>
Sent: Wednesday, January 22, 2003 10:04 PM
Subject: Re: Email hosting
I'm not positive they're going to raise rates. They say on their web page
that they will be "considering services and pricing" whatever that means.
-Alex
- Original Message -
From: <[EMAIL PROTECTED]>
To: "Hewitt Tech" <[EMAIL PROTECTED]>
Cc: &l
Actually Ben, at first glance I thought you were going to launch into a
"When I was a boy we had to walk two miles to school up hill both ways!" ;^)
-Alex
- Original Message -
From: <[EMAIL PROTECTED]>
To: "Greater NH Linux User Group" <[EMAIL PROTECTED]>
Sent: Wednesday, January 22, 2003
Ah yes, but why, after a pile of telecommunications companies went bankrupt
laying thousands of miles of buried fibre-optics cables are we still talking
about dial-up connections? What *does* it cost to deliver high speed? For
that matter, I think copper/fibre is passé. It should be possible to use
Actually, I do both. I have registered a couple of domain names and one is
hosted. I also decided that the bigfoot service for $9.95/quarter was
reasonable and I've already asked our online friends to use my bigfoot
address. I was just curious about who was using what and for how much. As
much as I
that a lot of high tech
folks aren't working just now and that their accounts may dry up a lot
faster than anticipated.
-Alex
P.S. Actually it's been so cold lately maybe hell is freezing over... ;^)
- Original Message -
From: "Jefferson Kirkland" <[EMAIL PROTECTED]&
I certainly was aware that Comcast had bought AT&T broadband. For some
reason I assumed that since AT&T owned the ATTBI.COM domain name that
customers wouldn't need to change their email addresses. But apparently
that's not true. Has anyone heard anything different? Given that we had to
switch addr
That's why I mirrored the disk and replaced it but I have a very uneasy
feeling about the durability of the drive. I'm quite unimpressed with having
to do this with an ostensibly new technology ATA drive.
-Alex
I've seen this before, quite a while ago where the disks were not
properly fo
I ran into an interesting (more like terrifying) problem with a Maxtor 80
gig D740X-6L drive. The drive has been in service for perhaps 9 months.
Within the last couple of weeks I noticed that the system, running Win2k
Pro, was taking longer to boot. I reviewed the event log and found that at
the s
That's a good point about being able to write to an NFS or Samba filesystem.
It would be pretty simple to provide student directories on a Linux
fileserver.
-Alex
- Original Message -
From: "Bill Mullen" <[EMAIL PROTECTED]>
To: "GNHLUG Mailing List" <[EMAIL PROTECTED]>
Sent: Sunday, Janua
I think you would avoid using a distro that tried to boot off an NT or XP
system. AFAIK, NTFS support in Linux is experimental. I think it works well
enough that you can for example, change the system password information, but
anything more extensive could lead to problems.
-Alex
- Original M
Dang! I wish I had seen your response before I posted my simplistic answer.
;^) Ok, I'll second the recommendation. You would probably also want to
caution the students to avoid mounting the system's hard drive or rather
explain how to mount the drive read-only to prevent any "accidents".
-Alex
Jerry, is there a reason why you and the other instructors couldn't use
Knoppix to teach your courses? You need to be able to boot off the CD-ROM
but once the system is booted, the system is faster to some extent because
it's mostly memory resident. Students could save their work to the floppy
driv
I recently purchased a Samsung ML 1430 laser printer which seems to handle
fairly heavy paper. I printed out some sheet music for my daughter and seem
to recall that the paper was "68 lb". It certainly was thick. I did notice
that there was some slippage of the printer feed mechanism on at least on
Geez Ben, don't hold back, tell us how you really feel! ;^)
And remember those damned things were built specifically so the manufacturer
could save $2 or $3 on the cost of the modem.
-Alex
- Original Message -
From: <[EMAIL PROTECTED]>
To: "Greater NH Linux User Group" <[EMAIL PROTECTED]
Derek, I think you just made my point! For every happy user you can find one
almost equally unhappy. As another data point I helped someone out with
their problem about a year ago. They had purchased a shiny new HP Pavilion
desktop system. They tried and failed to reliably connect to 3 different
IS
I think a really sad thing about our technology is that name brands don't
necessarily mean the system will be all that good. For every pissed off
Compaq customer I've found a pissed off Dell customer. That goes for most of
the vendors out there. They mostly provide support from the same third party
I wouldn't say "quick to point the finger". It took me quite a long time to
come to the conclusion that there was a CPU/Windows interaction. And yes,
now that you mention it I've see a few Intel boards be unstable under
Windows. Truth is, there really is engineering involved in building a stable
ro
Thing is though Ben, the machine I had the most trouble with was
manufactured by a now merged PC company called Compaq. With the original
factory installation the machine wouldn't run more than an hour or so
without crashing or blue screening. You're probably quite right about a lot
of systems not
other guy's.
-Alex
P.S. This problem has been out there for a while, about a year, so hopefully
the fix is readily available.
- Original Message -
From: "Mark Komarinski" <[EMAIL PROTECTED]>
To: "Hewitt Tech" <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTEC
It's been a while since I deliberately forced the machine into standby
although it would only take a few minutes. My vague recollection is that
stopping/removing/reinserting the card didn't help. In fact I concluded at
the time that it was YAWB (yet another Windows Bug). If I had a nickel for
every
I've seen something similar with my laptop Win 2k using a wireless card.
Everything works fine until the laptop, running on battery, desides to go to
standby mode. When the system wakes up it's pretty much impossible to revive
the network connection off the wireless card. Just plain bad design AFAI
9, 2003 9:39 AM
Subject: Re: Anyone heard of an open source tool to read ISO images?
On Thu, 2003-01-09 at 09:13, Hewitt Tech wrote:
> I just ran across a tool called undisker at www.undisker.com that is
> supposed to be able to read from a .iso image file. Normally you would use
a
> CD
Thu, 2003-01-09 at 09:13, Hewitt Tech wrote:
> I just ran across a tool called undisker at www.undisker.com that is
> supposed to be able to read from a .iso image file. Normally you would use
a
> CD burner to burn the image to a CD but this tool allows you to read the
> contents of the
Cool! I had no idea you could do that with a file.
-Alex
P.S. Now that's a nice little advantage over Windows.
- Original Message -
From: "Travis Roy" <[EMAIL PROTECTED]>
To: "Hewitt Tech" <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Thu
I just ran across a tool called undisker at www.undisker.com that is
supposed to be able to read from a .iso image file. Normally you would use a
CD burner to burn the image to a CD but this tool allows you to read the
contents of the .iso file. You can extract one or more files from the .iso
file
Not really. The software that comes with the modem could easily do this. The
PC should still be useable (although with Windows 9x that might not be much
;^)).
-Alex
P.S. The caller-id stuff has been available in modem software for a long
time.
- Original Message -
From: "Michael O'Donnel
et dial-up
account. Since then they've gone to a regular per month charge. I don't know
if they're any good.
-Alex
- Original Message -
From: "Hewitt Tech" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, January 08, 2003 11:18 AM
Subject:
1 - 100 of 142 matches
Mail list logo