At 11:29 AM 9/13/03, Rhugga wrote:
2) Has any tried using ghost to clone systems using Grub as the boot
loader? I seem to remember ghosting would never work right with lilo, but
I never tried it using grub.
Earlier this month, I copied a RH72/lilo disk using ghost - no problem,
except you must
At 03:20 PM 7/21/03, Lee Flier wrote:
On Mon, 2003-07-21 at 14:42, John Nichel wrote:
> Since
> the browser caches the username and password with the authentication
> realm, as described earlier in this tutorial, this is not a function of
> the server configuration, but is a question of getting t
At 01:59 PM 7/21/03, Mike McMullen wrote:
> Does anyone know of a utility or code that will
> time-out a web session with Apache?
in httpd.conf (default is 5 minutes):
#
# Timeout: The number of seconds before receives and sends time out.
#
Timeout 300
--
redhat-list mailing list
unsubscribe mail
You apparently have a bandwidth limitation on that site
At 01:24 PM 7/18/03, John Doesovich wrote:
Have a look at these shots and let us know if we were
hacked
http://www.geocities.com/johndoesovich/hacked.html
__
Do you Yahoo!?
SBC Yahoo! DSL - Now only $29.9
At 04:11 PM 7/17/03, Timothy Stone wrote:
Eric Chevalier wrote:
If you're going to install Cygwin and XFree86 on the Windows systems,
what about the possibility of installing x3270 on those same boxes, as
well? The New Features/Change List for x3270:
http://www.geocities.com/SiliconValley/Peaks
At 02:57 PM 7/17/03, Timothy Stone wrote:
Situation:
I have 600+ clients on Windows desktops. Each connects to a mainframe data
application via IBM Personal Communications 3270 Terminal Emulation over
telnet (ugh!).
What I know:
x3270 works on a RHL 8 server that I use as a testbed. I know that
At 04:17 PM 7/9/03, Frederic Herman wrote:
Frank Bax wrote:
I found this page: they preload Linux, but not RedHat - perhaps the
chipset used is not on RedHat's list of supported hardware?
At 12:35 PM 7/9/03, Frederic Herman wrote:
I just got an IBM G40 seried laptop, and installed RedHa
I found this page: they preload Linux, but not RedHat - perhaps the
chipset used is not on RedHat's list of supported hardware?
At 12:35 PM 7/9/03, Frederic Herman wrote:
I just got an IBM G40 seried laptop, and installed RedHat 9.0 on it.
The internal ethernet controller seems to be seen by kud
At 11:30 AM 7/8/03, Richard Crawford wrote:
>So I'm trying to figure out how I can set things up so that my wife
>can check her mail with SM when she forgets to turn off Outlook.
Two choices, I can think of:
A) This change would affect both accounts... Use cron to shutdown the pop
daemon when you
At 12:02 PM 7/3/03, Frank Bax wrote:
At 03:52 PM 7/2/03, Frank Bax wrote:
RedHat7.2 - OOo 1.0.3.1 - We have placed some OOo documents on our
intranet. When I click the link to a OOo document, the file is displayed
as garbage within Konqueror. If I right-click, "save as" to disk, th
At 03:52 PM 7/2/03, Frank Bax wrote:
RedHat7.2 - OOo 1.0.3.1 - We have placed some OOo documents on our
intranet. When I click the link to a OOo document, the file is displayed
as garbage within Konqueror. If I right-click, "save as" to disk, then
browse disk and double-click on
At 11:32 AM 7/3/03, Richard Humphrey wrote:
I am running a RH 8.0 box with up2date sendmail and when I got to
www.dnsreport.com i get the following error. Anyone know what the cause
is?
WARN: One or more of your mailservers does not accept mail in the domain
literal format ([EMAIL PROTECTED]). Mai
RedHat7.2 - OOo 1.0.3.1 - We have placed some OOo documents on our
intranet. When I click the link to a OOo document, the file is displayed
as garbage within Konqueror. If I right-click, "save as" to disk, then
browse disk and double-click on file, then OOo opens the document as it
should. I
At 04:12 PM 6/26/03, Gerry Doris wrote:
> Ed Wilts wrote:
>> On Thu, Jun 26, 2003 at 03:40:43PM -0400, Gerry Doris wrote:
>>
>>>Off the top of my head I would suggest you create a script running in
>>> cron
>>>that checks for new files in the upload directly, if there are any, runs
>>> a
>>>virus
At 05:15 PM 3/12/03, Frank Bax wrote:
Whenever I try to print from Kmail, the printer properties has defaulted
the paper size to A4. When I run printconf-gui, I see that printer has
been setup with USletter. I do get Kmail to use the proper default? It's
a pain to remember changi
What symlink did you create?
At 06:48 PM 3/12/03, Joe Polk wrote:
I had a similar problem until I created the symlink in my
.mozilla/plugins directory in my user directory.
<>
On Wed, 2003-03-12 at 17:44, Frank Bax wrote:
> Good idea - but both (browser and javascript console) windows
3 11:57 pm, Frank Bax wrote:
> I've downloaded a javascript for dynamic menus within webpage. Seems to
> work well for every platforms/browsers combo I've tried - except RedHat 7.2
> Netscape 4.78 - In this case selecting a menu option closes Netscape. Is
> there anyplace I c
Whenever I try to print from Kmail, the printer properties has defaulted
the paper size to A4. When I run printconf-gui, I see that printer has
been setup with USletter. I do get Kmail to use the proper default? It's
a pain to remember changing it everytime.
RedHat 7.2 - Kmail 1.3.1 - KDE 2.
I've downloaded a javascript for dynamic menus within webpage. Seems to
work well for every platforms/browsers combo I've tried - except RedHat 7.2
Netscape 4.78 - In this case selecting a menu option closes Netscape. Is
there anyplace I could look for error messages, or some clue to what's
w
At 04:12 PM 2/10/03, Arthur Mueller wrote:
>Does anyone know how to turn on numlock on system start
>automatically with RedHat 7.3?
Isn't this set in BIOS, rather than OS?
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]?subject=unsubscribe
https://listman.redhat.com/mailman/li
RedHat 7.2 - while in menu maintenance, I accidently deleted 'System'. How
do I get it back? In case it helps, there are other userid's on the system
that are still ok.
Frank
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]?subject=unsubscribe
https://listman.redhat.com/mail
At 06:24 PM 1/2/03, David Busby wrote:
Suppose you have an array in PHP like
$ar = array("a", "b", "c", "d", "e", "f", "g");
Now say you want to remove the 3rd item
unset($ar[2]);
All good? Not really...the array doesn't get shifted down, how could one
pull that off (or should I spin th
At 03:35 PM 1/2/03, Ferguson, Michael wrote:
>Running RH8.0. What is the command - Where is the icon,
>to show my hard drive capacity, space used, space free?
df -h
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]?subject=unsubscribe
https://listman.redhat.com/mailman/listinfo
At 11:50 PM 11/17/02, Shiva Haddad wrote:
I want to have client , server database in redhat for a IP Telephone
system product,
it must be multi-user & ...
which one is better , Mysql or postgresql ?
From what I've read, it appears to depend on what you will do. If your
system will be largely i
At 07:54 AM 11/16/02, Leonard den Ottolander wrote:
Hello Ed,
> In any case, mailman does have options to detect infinite loops like
> this but even the current production releases miss a few. In the beta
> releases, the detection is supposed to be better and more cases will be
> caught.
Coul
At 05:34 PM 11/15/02, Daniel Goldin wrote:
>Any way to do this? If not, does anyone know of good alternatives
>via the Internet? Thanks.
You cannot use your ADSL modem for fax, but you can simply hook your
fax-modem to the same phone line and use that for faxes while surfing on
ADSL connection
At 02:27 AM 11/15/02, Tianran Chen wrote:
How can I change the host name of my host? I am the root. Thanks for any help.
If find that trying to memorize this procedure for the several un*x
variants I work with is not worth the trouble. I typically enter the command:
grep -i -r hostnam
At 01:13 AM 10/20/02, MET wrote:
Attached is a copy of my default /etc/profile file which contains all of the
system wide variables/paths for all of my bash users. If someone could show
me how I would add something like /usr/local/qt/doc and /usr/local/qt/include
and one or two more that would be
At 02:53 AM 10/20/02, Schelstraete Bart wrote:
and create a .htaccess file with the following
AuthName "restricted stuff"
AuthType Basic
AuthUserFile etc/httpd/users
AuthUserFile /etc/httpd/users
You forgot a trailing '/'. I suppose this was just a typo?
As for typo's - didn't you me
I've heard that there are Linux distro's that fit on a floppy, but I'm
not sure RH is one of them. You might try a search for floppy based
systems to see how they got the size down.
At 08:29 AM 10/20/02, Shankar Rajendran wrote:
I
trying to Port Rh Linux 6.1 in a 8 MB Diskonchip flash disk. If
RedHat 7.2 - Why do menus on this test page not work in Konqueror?
http://qb2000.on.ca/php/menu/CascadeMenu.htm
--
redhat-list mailing list
unsubscribe mailto:redhat-list-request@;redhat.com?subject=unsubscribe
https://listman.redhat.com/mailman/listinfo/redhat-list
At 12:35 PM 10/15/02, Mark wrote:
>On Tuesday 15 October 2002 06:50 am, Richard is done writ:
>
> > I've been given a little challenge by my boss which I'm kinda hoping one of
> > you kinda people can help me with. We need to capture some data from a
> > AS/400 system held centrally. The data can
The AS/400 has lots of ways to send data down to a PC - pretending to be a
printer is the worst option available.
The AS/400 can be a fileserver for a PC network, just have an AS/400 script
copy the output to a file in this part of the system and PC user can copy
it just like any other file.
grep -v ^b$ myfile > newfile
At 06:43 PM 10/14/02, Rudolf Amirjanyan wrote:
>I have a file like this
>
>a
>b
>a
>b
>
>How I can filter this file, so that all the lines containing
>b, were deleted.
>Is there any way to do
read the copyright section of:
man convert
At 03:38 PM 10/14/02, Teodor Georgiev wrote:
>ImageMagick = command line ? ? ? ? ? ?
>
>- Original Message -
>From: "Cristian Grigoriu" <[EMAIL PROTECTED]>
>To: <[EMAIL PROTECTED]>
>Sent: Monday, October 14, 2002 10:32 PM
>Subject: Re:
At 11:49 AM 10/8/02, Jeff Bearer wrote:
>I'm using Mailman to manage several Newsletters, the subscribers can't
>submit, they just receive mail. One of the lists is up to nearly 2000
>users and Sendmail takes forever to send the mail. The last e-mail took
>20 hours to complete, and one was sent
At 05:59 PM 10/7/02, [EMAIL PROTECTED] wrote:
>On Monday 07 October 2002 20:46, Nagib Abi Fadel wrote:
> > Thanx guys,
> > but could i specify more then one mail server for retrieving messages. I
> > meen if i have more then one mail account in different servers can i setup
> > Squirrelmail for re
At 10:36 AM 10/8/02, stanley wrote:
>Please may someone help , I need to delete some e-mails from my mailq
>and I don't know how
shutdown sendmail, then delete the files that correspond to the emails you
want to delete. re-start sendmail.
--
redhat-list mailing list
unsubscribe mailto:[EM
At 08:04 PM 10/5/02, Edward Marczak wrote:
>On 10/5/02 4:55 PM, "Martín Marqués" <[EMAIL PROTECTED]> tapped the
>keys:
>
> > Is it really possible (I've been reading lots of discussions about this
> on the
> > net) to set virtual domain form MTA (on one side) and web servers (on the
> > other sid
I've upgraded my RedHat 7.2 system kernel 2.4.9-34 (this part went
smoothly) and then upgraded to XFree 4.2.1 and now when I boot my system I
can not login to either KDE nor GNOME - there is a very basic window
manager, and if I type 'startkde' in the terminal window provide, KDE does
start in
someone suggested trying 'wordperfect' from shell, which produced:
wine: readwriteprintcap.c:641: ParseLprPrintcapBuffers: Assertion
`(charsCopied < 4)' failed.
Frank
At 07:38 PM 9/10/02, Gary wrote:
>On Tuesday 10 September 2002 05:39 pm, you wrote:
>
> > I installed WPO2000 on RedHat 7.2 - i
It's a reverse dns problem - the machine you are trying to ssh into
should have an entry in /etc/hosts for the machine trying to gain
access.
At 08:40 PM 9/10/02, Chavez Gutierrez, Freddy wrote:
I'm using RH 7.3 and
SSH. When I login remotely using a SSH client (PUTTY) the system take too
much tim
I installed WPO2000 on RedHat 7.2 - it worked fine for a while. I used the
updated install scripts and Mr. Torrie's CorelWine rpm. It has been
working firn for a couple of weeks (and continues to do so on another
machine). Now when I start the WP application, I get a window that says
"Wine
We have attempted to go non-Windows with a few PC's in the office. We have
a data entry application on our webserver. One of the users noticed an
apparent short-coming in Konqueror today. Most of our data entry is done
via select boxes. When using IE, it was possible to tab into a select bo
chives for this list exist with a better
search engine?
Frank
>Date: Wed, 21 Aug 2002 09:30:25 -0400
>To: [EMAIL PROTECTED]
>From: Frank Bax <[EMAIL PROTECTED]>
>Subject: Re: Error while initializing the sound driver:
>
>A search of list archives (at redhat.com) for "
A search of list archives (at redhat.com) for "sound driver" yields "no hits".
Please forward any messages you might have on the subject.
Frank
At 02:52 AM 8/21/02, Patrick Beart wrote:
>At 8:43 PM -0400 8/20/02, Frank Bax wrote:
>>I have an ASUS TUV4x motherbo
I have an ASUS TUV4x motherboard that has integrated sound.
I've installed RedHat 7.3 and get the following message after I logon:
Sound server informational message:
Error while initializing the sound driver:
device /dev/dsp can't be opened (No such device)
The sound server will continue, using
I connected a Samsung ML-1210 printer to my usb port and rebooted machine
running RedHat 7.2. I used printconf-gui to setup the printer with gdi
driver. During this process, /dev/usb/lp0 does manage to present "Samsung
Electronics" under "model" column, so I'm guessing the usb stuff is workin
Does anyone have WPO2000 working with Redhat 7.2?
I installed WPO2000 on RedHat 7.2 using the scripts found at:
ftp://ftp.corel.com/pub/linux/Office2000/updates/
And it was working until I defined a printer to the system.
On a second system with printers previously defined, WP failed imm
I've installed dualboot Win98 / RedHat 7.2 with lilo. When I try:
K - Preferences - System - Boot Manager(LILO) - Boot after 0 seconds - OK
And reboot, I still get the lilo prompt for Win98/Linux. Why? I would
like to have no delay at this point. If I want to boot to Windows (very
rare), I
Actually, LinkSys boxes work the other way around. You configure a
starting ip (default is 100) and it uses from there to 255 for DHCP. Use a
number less than 100 for your static ip's. Don't use the ip LinkSys itself
(default is 192.168.1.1, but can be changed).
At 08:49 PM 23/04/02 -0500,
At 11:47 AM 20/04/02 -0500, ABrady wrote:
>On Sat, 20 Apr 2002 08:54:35 -0700 (PDT)
>script <[EMAIL PROTECTED]> quietly intimated:
>
> > someone gave me a linksys ethernetfast cable/dsl
> > router and i'm trying to hook it up with redhat 7.2.
> > has anyone out there used a linksys with redhat 7.2
At 12:16 AM 2/26/02 -0500, Brian Ashe wrote:
>On Monday February 25, 2002 11:22, Frank Bax said something about:
>> We have a print server device that connects parrallel cable to CAT5.
>> http://www.startech.com/ststore/itemdetail.cfm?product_id=PS1100A
>> This device
We have a print server device that connects parrallel cable to CAT5.
http://www.startech.com/ststore/itemdetail.cfm?product_id=PS1100A
This device works fine (although sometimes tempermental) with LPR driver on
NT4 system pointed at LPT1:192.168.1.8 - it doesn't work (yet) with Linux.
I'm not sure
Are you sure its the authentication that taking the time, or the
connection? If you were to telnet/ssh into the box, does it take many
seconds to get the login prompt? If this is the case, try adding an entry
to /etc/hosts for the machine that is trying to access the box.
Frank
At 04:27 PM 2/2
No need. They will go away on their own after 5 days. Not quite forever.
Otherwise, shutdown sendmail and delete offending file(s) from queue
directory. I believe there are two or three files for each mailq entry.
Each one of set only has minor differences in obscure filename. Compare
output o
56 matches
Mail list logo
