RE: ccnp voice certification
It *is* zero pages; it's a CIM (Cisco Interactive Mentor). I have it and am using it. So far, I'm pretty impressed. It includes a discussion of the history of the phone network, analog and digital signaling, etc. And the biggest draw is the simulated router environment which allows you to configure some 3600 series router with VICs to complete a call. I'm not done with it yet, but I'm enjoying it and feel like I'm getting the hang of VoIP pretty quickly. - Don -Original Message- From: Ole Drews Jensen [mailto:[EMAIL PROTECTED]] Sent: Monday, January 29, 2001 12:00 PM To: 'umerkhan'; [EMAIL PROTECTED] Subject: RE: ccnp voice certification The only book I can find is this one (ISBN:1587200236) : http://www.ciscopress.com/book.cfm?series=2book=98 http://www.amazon.com/exec/obidos/ASIN/1587200236/qid%3D/107-8239556-3243701 (watch for wordwrap) It must be a pretty easy book to read, because according to CiscoPress, it only has 0 pages. :-) Should you deside to get it, please let me know if it's good, since I probably will look at that exam when I'm done with my CCNP. Hth, Ole Ole Drews Jensen Systems Network Manager CCNA, MCSE, MCP+I RWR Enterprises, Inc. [EMAIL PROTECTED] http://www.CiscoKing.com NEED A JOB ??? http://www.oledrews.com/job -Original Message- From: umerkhan [mailto:[EMAIL PROTECTED]] Sent: Monday, January 29, 2001 1:09 PM To: [EMAIL PROTECTED] Subject: ccnp voice certification hello=20 can anyone suggest me any book or guide for the prepration of the ccnp = cvoice certification (640-647 CVOICE) thanx, umer _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: OT Fridays Funnies!
That incident is what caused me to switch careers and move away from Sydney. ;-) And ladies, please try to warm up your hands first! -Original Message- From: Natasha [mailto:[EMAIL PROTECTED]] Sent: Friday, January 26, 2001 11:01 AM To: CCIE Group study list Subject: OT Fridays Funnies! Here's your weekly safety brief. Be careful what you wear (or don't wear), when working under your vehicle...especially in public. From the Sydney Morning Herald Australia comes this story of a central west couple who drove their car to K-Mart only to have their car break down in the parking lot. The man told his wife to carry on with the shopping while he fixed the car there in the lot. The wife returned later to see a small group of people near the car. On closer inspection she saw a pair of male legs protruding from under the chassis. Although the man was in shorts, his lack of underwear turned private parts into glaringly public ones. Unable to stand the embarrassment, she dutifully stepped forward, quickly put her hand UP his shorts and tucked everything back into place. On regaining her feet she looked across the hood and found herself staring at her husband who was standing idly by. The mechanic, however, had to have three stitches in his head -- Natasha Flazynski http://www.ciscobot.com My Cisco information site. http://www.botbuilders.com Artificial Intelligence and Linux development A bus station is where a bus stops. A train station is where a train stops. On my desk, I have a work station... _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: But isn't that the routers job???
I can see where you're coming from, and maybe I would have worded it differently if I'd written the book (i.e. "Why leave it up to the route processor when it can be switched faster?"); but do keep in mind that the CPU in a router isn't exactly cutting edge technology. If you read the specs, most of them are similar to those in computers that we all lusted for five years ago. That being the case, the argument is a good one: take as much burden off the processor as possible by reducing the number of lookups. - Don -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Sent: Monday, January 22, 2001 8:42 PM To: [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Subject: Re: But isn't that the routers job??? Hi Tony, I understand all of this fully but where I'm confused is, how much of a burden could this be if that's all it has to do. I want to know what the "more important" things are...Maybe I overestimate the power of a route processor but I would think that its especially created with the power to handle tons of routing considering that that's what its designed for...am I wrong? Mark Z. In a message dated 1/22/01 11:27:41 PM Eastern Standard Time, [EMAIL PROTECTED] writes: Hi, My understanding is that routers perform basically two functions one is to route that is to find the best path a given message should take and the other is to switch that is once the route is known to send the data to the appropriate interface. I think what they are saying in the book. If you know the path a message should take that is the route then why go through the procedure of identifying it again why not just switch it. I know what I'm trying to say. What they say in the book is right "why burden the CPU". Teunis, Hobart, Tasmania Australia On Monday, January 22, 2001 at 11:05:02 PM, [EMAIL PROTECTED] wrote: Hey Group, Me again. I'm reading for my CIT and am at the section where it goes into detail of the various switching methods in the router (i.e., silicon, CEF, autonomous, etc.) I understand how all this works and understand how the SP takes a lot of the stress away from the RP and this is good because your avoiding bogging the RP/CPU down. I have a problem with these statements though and want some clarification... Taken form the book (Lammle's CIT p. 173): "This is just another reason why switching is such a good practice. Why burden the RP with every packet if it's not necessary? By using switching methods, the RP is free to use valuable CPU time on more important things than doing route lookups for every packet that comes in the router." Correct me if I'm wrong but isn't that what a routers supposed to do??? What else does the RP have to do that is more important than ROUTING? I may be overanalyzing this but it just seems that he's saying that the RP has better things to do like make coffee, rather than route. Basically, could somebody give me a list of some other things the RP/CPU has to do other than route lookups...(I know there are access-lists and other CPU things here, I just would like a solid list to remember). Thanks team, Mark Zabludovsky ~ CCNA, CCDA, 3/4-NP A HREF="mailto: [EMAIL PROTECTED]"[EMAIL PROTECTED]/A "Even if I knew I had only 1 more week to live, I would still schedule my CCIE lab. I would just have to work a little harder I guess. After all, without any goals in life, I'm dead already." ~Mark Zabludovsky~ Mark Zabludovsky ~ CCNA, CCDA, 3/4-NP A HREF="mailto: [EMAIL PROTECTED]"[EMAIL PROTECTED]/A "Even if I knew I had only 1 more week to live, I would still schedule my CCIE lab. I would just have to work a little harder I guess. After all, without any goals in life, I'm dead already." ~Mark Zabludovsky~ _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Spam from KG2 about Free Money
As I recall, Kelly posted a message a few weeks back mentioning a drawing for a free router. I signed up for the drawing and am also getting e-mail from them now. I don't think it was intended as spam. - Don -Original Message- From: Paul Borghese [mailto:[EMAIL PROTECTED]] Sent: Wednesday, January 17, 2001 10:09 AM To: [EMAIL PROTECTED] Subject: Spam from KG2 about Free Money Did anyone else get a spam from KG2 about some offer they have. The subject contained the title "FREE MONEY". I want to make sure they are not collecting addresses from the list. Paul _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Little ID card
Yep, ya sure do. I've got two new ones since getting my NP/DP certs. -Original Message- From: Steven Dangerfield [mailto:[EMAIL PROTECTED]] Sent: Friday, January 12, 2001 8:32 AM To: [EMAIL PROTECTED] Subject: OT: Little ID card Don't want to sound too fussy, but, Now a days when you get your cisco cert do you still get the credit card sized id card that says your name, cisco id, and the qualification you've got. These sort of things are handy at interview time ! anyone passed CCNP and got one of these let me know ! Steve Steven Dangerfield, Network Engineer/Analyst B.Eng, CCNA, CCSA Email : [EMAIL PROTECTED] Totalise - the Users ISP - To become a member and a shareholder visit http://www.totalise.net --- "From Golfing Breaks to Carribean Cruises, Totalise shop has the holiday for you" http://www.totaliseshop.co.uk _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: CCIE LAB
Errr... you might want to elaborate on exactly what kind of help you want. -Original Message- From: rajeev_ks@ [mailto:[EMAIL PROTECTED]] Sent: Friday, January 12, 2001 10:54 AM To: [EMAIL PROTECTED] Subject: CCIE LAB Need help about CCIE LAB preparation. Finished my Qual last october 2000. Pls respond. Rajeev. rajeev_ks@0 e-mail: rajeev_ks@[EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Back to Back in lab
Crossover, yes. But what kind of crossover? Are you emulating a T1? You'll need a T1 crossover. Or 56/65K? You'll need a 56/64K crossover. -Original Message- From: Roberts, Timothy [mailto:[EMAIL PROTECTED]] Sent: Thursday, January 11, 2001 9:51 AM To: '[EMAIL PROTECTED]' Subject: Back to Back in lab If I connect two CSU's back to back, what kind of cable should I use? Should it just need a crossover cable? Thanks _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: 700seriesInfo ISBN#s
700 Switch? I don't know of a switch in the 700 series, but there are a few access routers - they used to be the Combinet line which Cisco bought. I don't know of any books which cover them, except to mention they exist. A quick search on CCO for "700 router" brought forth a wealth of information, though. - Don -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Sent: Thursday, January 11, 2001 12:22 PM To: [EMAIL PROTECTED] Subject: 700seriesInfo ISBN#s I HAVE SEEN REFERENCES TO 700'S BUT NOT IN A BOOK. CAN ANYONE ADVISE THE ISBN# OF ANY BOOKS THAT COVER THE 700 SERIES SWITCHES? THANKS IN ADVANCE FOR YOUR HELP. ROGER This message powered by EMUMAIL. -- http://www.EMUMAIL.com _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Config help required
You need to remove all references to the unused DLCIs in your config, and you'll likely have to reboot the router also. -Original Message- From: lansolott [mailto:[EMAIL PROTECTED]] Sent: Thursday, January 11, 2001 10:11 PM To: [EMAIL PROTECTED] Subject: Config help required Hi guys, I have a router in production that I monitor, I recieved a trap on it, when I went in I could see in the log that a few DLCI's changed status to deleated, I later found out that those DLCI's were no longer in production, some are still in use, to avoid further confusion I would like to remove the unused DLCI's, but I'm not sure how to go about it, I have spoken with the carrier, they said that there were only 2 DLCI's configured on the frame switch, 16, 19. the following may help, what I would like is that when I type in sh frame pvc, the deleated PVC's don't appear to avoid further confusion of what the status is suposed to be... Thanks interface Serial0 description Frame-Relay 56K DLCI 23 ip address 135.135.1.6 255.255.255.0 encapsulation frame-relay bandwidth 56 no frame-relay inverse-arp IP 17 no frame-relay inverse-arp IP 21 no frame-relay inverse-arp IP 22 no frame-relay inverse-arp IP 23 no frame-relay inverse-arp IP 26 no frame-relay inverse-arp IP 27 no frame-relay inverse-arp IP 30 no frame-relay inverse-arp IP 31 no frame-relay inverse-arp IP 32 frame-relay map ip 135.135.1.1 16 broadcast tcp header-compression passive frame-relay map ip 135.135.1.4 19 broadcast #sh frame pvc PVC Statistics for interface Serial0 (Frame Relay DTE) DLCI = 16, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial0 input pkts 33590455 output pkts 33585407 in bytes 1735964044 out bytes 637683181 dropped pkts 1 in FECN pkts 55868 in BECN pkts 0 out FECN pkts 0 out BECN pkts 0 in DE pkts 33590403 out DE pkts 0 pvc create time 25w1d last time pvc status changed 6:44:11 DLCI = 17, DLCI USAGE = LOCAL, PVC STATUS = DELETED, INTERFACE = Serial0 input pkts 0 output pkts 0 in bytes 0 out bytes 0 dropped pkts 0 in FECN pkts 0 in BECN pkts 0 out FECN pkts 0 out BECN pkts 0 in DE pkts 0 out DE pkts 0 pvc create time 25w1d last time pvc status changed 6:44:14 DLCI = 19, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial0 input pkts 1603389 output pkts 1608551 in bytes 257099301 out bytes 261556274 dropped pkts 1 in FECN pkts 68 in BECN pkts 138 out FECN pkts 0 out BECN pkts 0 in DE pkts 1603386 out DE pkts 0 pvc create time 25w1d last time pvc status changed 6:44:17 DLCI = 21, DLCI USAGE = LOCAL, PVC STATUS = DELETED, INTERFACE = Serial0 input pkts 0 output pkts 0 in bytes 0 out bytes 0 dropped pkts 0 in FECN pkts 0 in BECN pkts 0 out FECN pkts 0 out BECN pkts 0 in DE pkts 0 out DE pkts 0 pvc create time 25w1d last time pvc status changed 6:44:18 DLCI = 22, DLCI USAGE = LOCAL, PVC STATUS = DELETED, INTERFACE = Serial0 input pkts 0 output pkts 0 in bytes 0 out bytes 0 dropped pkts 0 in FECN pkts 0 in BECN pkts 0 out FECN pkts 0 out BECN pkts 0 in DE pkts 0 out DE pkts 0 pvc create time 25w1d last time pvc status changed 6:44:20 DLCI = 23, DLCI USAGE = LOCAL, PVC STATUS = DELETED, INTERFACE = Serial0 input pkts 0 output pkts 0 in bytes 0 out bytes 0 dropped pkts 0 in FECN pkts 0 in BECN pkts 0 out FECN pkts 0 out BECN pkts 0 in DE pkts 0 out DE pkts 0 pvc create time 25w1d last time pvc status changed 6:44:21 DLCI = 26, DLCI USAGE = LOCAL, PVC STATUS = DELETED, INTERFACE = Serial0 input pkts 0 output pkts 0 in bytes 0 out bytes 0 dropped pkts 0 in FECN pkts 0 in BECN pkts 0 out FECN pkts 0 out BECN pkts 0 in DE pkts 0 out DE pkts 0 pvc create time 25w1d last time pvc status changed 6:44:22 DLCI = 27, DLCI USAGE = LOCAL, PVC STATUS = DELETED, INTERFACE = Serial0 input pkts 0 output pkts 0 in bytes 0 out bytes 0 dropped pkts 0 in FECN pkts 0 in BECN pkts 0 out FECN pkts 0 out BECN pkts 0 in DE pkts 0 out DE pkts 0 pvc create time 25w1d last time pvc status changed 6:44:30 DLCI = 30, DLCI USAGE = LOCAL, PVC STATUS = DELETED, INTERFACE = Serial0 input pkts 0 output pkts 0 in bytes 0 out bytes 0 dropped pkts 0 in FECN pkts 0 in BECN pkts 0 out FECN pkts 0 out BECN pkts 0 in DE pkts 0 out DE pkts 0 pvc create time 25w1d last time pvc status changed 6:44:36 DLCI = 31, DLCI USAGE = LOCAL, PVC STATUS = DELETED, INTERFACE = Serial0 input pkts 0 output pkts 0 in bytes 0 out bytes 0 dropped pkts 0 in FECN pkts 0 in BECN pkts 0 out FECN pkts 0 out BECN pkts 0 in DE pkts 0 out DE pkts 0 pvc create time 25w1d last time pvc status changed 6:44:37 DLCI = 32, DLCI USAGE = LOCAL, PVC STATUS = DELETED, INTERFACE = Serial0 input pkts 0 output pkts 0 in bytes 0 out bytes 0 dropped pkts 0 in FECN pkts 0 in BECN pkts 0 out FECN pkts 0 out BECN pkts 0 in DE pkts 0 out DE pkts 0 pvc create time 25w1d last time pvc status changed 6:44:38 Jan 11 16:48:17: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0, changed state to down Jan 11 16:48:18: %LINK-3-UPDOWN: Interface Serial0, changed state to down Jan 11
RE: Newbie Question
For the ISDN you'll need either two live ISDN lines or an ISDN simulator. For the T1 WICs you can make a T1 crossover cable. I fergit the exact pinout, but it should be no trouble to find it on the Internet. - Don -Original Message- From: Robert M. Cramer [mailto:[EMAIL PROTECTED]] Sent: Wednesday, January 10, 2001 6:17 PM To: [EMAIL PROTECTED] Subject: Newbie Question I have a newbie question regarding a home test lab: I have two ISDN routers 802 and 804 - Can I connect the ISDN interfaces back to back to simulate a connect or do I need something else? I also have the same question with T1 WIC's. Thanks _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Frame Relay PVC
My first and last inclination (not to mention every inclination in between) is to blame the telco. If they've truly done testing on the circuit and can't find anything, then consider whether you cross multiple carriers on that PVC. It may not be your local carrier's issue, which is why they haven't found anything. If you're on a single carrier, then I would recommend a redesign of that PVC. It's easy to say there's nothing wrong with the configuration of the PVC when you're talking with someone who doesn't know all the ins and outs of frame switch configuration, but in my experience, most of the carrier techs don't really KNOW their equipment - they just have a script they run through to create new PVCs, hence they may not be exactly accurate when they say that everything is fine. Hope that helps. - Don -Original Message- From: Radford Dion [mailto:[EMAIL PROTECTED]] Sent: Wednesday, January 03, 2001 8:46 AM To: [EMAIL PROTECTED] Subject: Frame Relay PVC I have a intermittent problem (about a dozen times a day) where a PVC goes from the active to inactive state. It used to happen maybe once a week. I have not changed anything on either router. Furthermore, my other PVC's are unaffected. I did a debug of the lmi packets and the output is below. My telco says there is nothing wrong with the physical connection or the configuration of the PVC. If anyone has an explanation for these events, or even better, a solution to fix the damn thing, I'd love to hear it. Thanks, Dion Serial0(in): Status, myseq 89 RT IE 1, length 1, type 0 KA IE 3, length 2, yourseq 193, myseq 89 PVC IE 0x7 , length 0x3 , dlci 235, status 0x2 PVC IE 0x7 , length 0x3 , dlci 250, status 0x2 PVC IE 0x7 , length 0x3 , dlci 271, status 0x0 *Jan 3 10:23:37: %FR-5-DLCICHANGE: Interface Serial0 - DLCI 271 state changed to INACTIVE *Jan 3 10:23:37: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0.1, changed state to down PVC IE 0x7 , length 0x3 , dlci 750, status 0x2 Serial0(out): StEnq, myseq 90, yourseen 193, DTE up datagramstart = 0x401D66CC, datagramsize = 14 FR encap = 0x00010308 00 75 95 01 01 01 03 02 5A C1 Serial0(in): Status, myseq 90 RT IE 1, length 1, type 1 KA IE 3, length 2, yourseq 194, myseq 90 Serial0(out): StEnq, myseq 91, yourseen 194, DTE up datagramstart = 0x40001338, datagramsize = 14 FR encap = 0x00010308 00 75 95 01 01 01 03 02 5B C2 Serial0(in): Status, myseq 91 RT IE 1, length 1, type 1 KA IE 3, length 2, yourseq 195, myseq 91 Serial0(out): StEnq, myseq 91, yourseen 194, DTE up datagramstart = 0x40001338, datagramsize = 14 FR encap = 0x00010308 00 75 95 01 01 01 03 02 5B C2 Serial0(in): Status, myseq 91 RT IE 1, length 1, type 1 KA IE 3, length 2, yourseq 195, myseq 91 Serial0(out): StEnq, myseq 92, yourseen 195, DTE up datagramstart = 0x402295A0, datagramsize = 14 FR encap = 0x00010308 00 75 95 01 01 01 03 02 5C C3 Serial0(in): Status, myseq 92 RT IE 1, length 1, type 1 KA IE 3, length 2, yourseq 196, myseq 92 Serial0(out): StEnq, myseq 93, yourseen 196, DTE up datagramstart = 0x4FB4, datagramsize = 14 FR encap = 0x00010308 00 75 95 01 01 01 03 02 5D C4 Serial0(in): Status, myseq 93 RT IE 1, length 1, type 1 KA IE 3, length 2, yourseq 197, myseq 93 Serial0(out): StEnq, myseq 94, yourseen 197, DTE up datagramstart = 0x401D5E9C, datagramsize = 14 FR encap = 0x00010308 00 75 95 01 01 01 03 02 5E C5 Serial0(in): Status, myseq 94 RT IE 1, length 1, type 1 KA IE 3, length 2, yourseq 198, myseq 94 Serial0(out): StEnq, myseq 95, yourseen 198, DTE up datagramstart = 0x43FC, datagramsize = 14 FR encap = 0x00010308 00 75 95 01 01 00 03 02 5F C6 Serial0(in): Status, myseq 95 RT IE 1, length 1, type 0 KA IE 3, length 2, yourseq 199, myseq 95 PVC IE 0x7 , length 0x3 , dlci 235, status 0x2 PVC IE 0x7 , length 0x3 , dlci 250, status 0x2 PVC IE 0x7 , length 0x3 , dlci 271, status 0x2 *Jan 3 10:24:37: %FR-5-DLCICHANGE: Interface Serial0 - DLCI 271 state changed to ACTIVE *Jan 3 10:24:37: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0.1, changed state to up PVC IE 0x7 , length 0x3 , dlci 750, status 0x2 Serial0(out): StEnq, myseq 96, yourseen 199, DTE up datagramstart = 0x43FC, datagramsize = 14 FR encap = 0x00010308 00 75 95 01 01 01 03 02 60 C7 Configs: Router A: interface Serial0 no ip address encapsulation frame-relay bandwidth 256 frame-relay lmi-type ansi ! interface Serial0.1 point-to-point ip address 172.19.148.254 255.255.255.0 frame-relay interface-dlci 271 Router B: interface Serial1 no ip address encapsulation frame-relay bandwidth 64 no fair-queue frame-relay lmi-type ansi ! interface Serial1.1 point-to-point ip address 172.19.148.253 255.255.255.0 frame-relay interface-dlci 240 * DISCLAIMER: The information contained in this e-mail may be confidential and is intended solely for the use of the named addressee. Access, copying or re-use of the e-mail or any information
RE: Frame Relay PVC
Really? You had the same PVC dropping regularly because of EM? Dang, that's weird! I've been playing with the idea of taking one of those home study courses in basic electrical theory. Maybe I oughta go ahead and do that; might clear up some ideas in my head. =) - Don -Original Message- From: John Neiberger [mailto:[EMAIL PROTECTED]] Sent: Wednesday, January 03, 2001 9:41 AM To: [EMAIL PROTECTED] Subject: RE: Frame Relay PVC I've experienced these types of symptoms several times and 99% of the time it really is the telco's fault, it just takes some serious pressure to get them to put some resources toward fixing the problem. However, at least once I found that it was a bad extension from the demarc (NIU) to the csu/dsu. The building we were in had lots of other equipment at the demarc, and from time to time throughout the day some of that equipment would generate enough EM noise that it would cause a lot of errors on our line and the PVC would go down. The telco tested and didn't find any problems and even sent a tech who didn't discover any problems. I later went there myself and re-oriented some of the cables in relation to other equipment and the problem went away. My first and last inclination (not to mention every inclination in between) is to blame the telco. If they've truly done testing on the circuit and can't find anything, then consider whether you cross multiple carriers on that PVC. It may not be your local carrier's issue, which is why they haven't found anything. If you're on a single carrier, then I would recommend a redesign of that PVC. It's easy to say there's nothing wrong with the configuration of the PVC when you're talking with someone who doesn't know all the ins and outs of frame switch configuration, but in my experience, most of the carrier techs don't really KNOW their equipment - they just have a script they run through to create new PVCs, hence they may not be exactly accurate when they say that everything is fine. Hope that helps. - Don -Original Message- From: Radford Dion [mailto:[EMAIL PROTECTED]] Sent: Wednesday, January 03, 2001 8:46 AM To: [EMAIL PROTECTED] Subject: Frame Relay PVC I have a intermittent problem (about a dozen times a day) where a PVC goes from the active to inactive state. It used to happen maybe once a week. I have not changed anything on either router. Furthermore, my other PVC's are unaffected. I did a debug of the lmi packets and the output is below. My telco says there is nothing wrong with the physical connection or the configuration of the PVC. If anyone has an explanation for these events, or even better, a solution to fix the damn thing, I'd love to hear it. Thanks, Dion Serial0(in): Status, myseq 89 RT IE 1, length 1, type 0 KA IE 3, length 2, yourseq 193, myseq 89 PVC IE 0x7 , length 0x3 , dlci 235, status 0x2 PVC IE 0x7 , length 0x3 , dlci 250, status 0x2 PVC IE 0x7 , length 0x3 , dlci 271, status 0x0 *Jan 3 10:23:37: %FR-5-DLCICHANGE: Interface Serial0 - DLCI 271 state changed to INACTIVE *Jan 3 10:23:37: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0.1, changed state to down PVC IE 0x7 , length 0x3 , dlci 750, status 0x2 Serial0(out): StEnq, myseq 90, yourseen 193, DTE up datagramstart = 0x401D66CC, datagramsize = 14 FR encap = 0x00010308 00 75 95 01 01 01 03 02 5A C1 Serial0(in): Status, myseq 90 RT IE 1, length 1, type 1 KA IE 3, length 2, yourseq 194, myseq 90 Serial0(out): StEnq, myseq 91, yourseen 194, DTE up datagramstart = 0x40001338, datagramsize = 14 FR encap = 0x00010308 00 75 95 01 01 01 03 02 5B C2 Serial0(in): Status, myseq 91 RT IE 1, length 1, type 1 KA IE 3, length 2, yourseq 195, myseq 91 Serial0(out): StEnq, myseq 91, yourseen 194, DTE up datagramstart = 0x40001338, datagramsize = 14 FR encap = 0x00010308 00 75 95 01 01 01 03 02 5B C2 Serial0(in): Status, myseq 91 RT IE 1, length 1, type 1 KA IE 3, length 2, yourseq 195, myseq 91 Serial0(out): StEnq, myseq 92, yourseen 195, DTE up datagramstart = 0x402295A0, datagramsize = 14 FR encap = 0x00010308 00 75 95 01 01 01 03 02 5C C3 Serial0(in): Status, myseq 92 RT IE 1, length 1, type 1 KA IE 3, length 2, yourseq 196, myseq 92 Serial0(out): StEnq, myseq 93, yourseen 196, DTE up datagramstart = 0x4FB4, datagramsize = 14 FR encap = 0x00010308 00 75 95 01 01 01 03 02 5D C4 Serial0(in): Status, myseq 93 RT IE 1, length 1, type 1 KA IE 3, length 2, yourseq 197, myseq 93 Serial0(out): StEnq, myseq 94, yourseen 197, DTE up datagramstart = 0x401D5E9C, datagramsize = 14 FR encap = 0x00010308 00 75 95 01 01 01 03 02 5E C5 Serial0(in): Status, myseq 94 RT IE 1, length 1, type 1 KA IE 3, length 2, yourseq 198, myseq 94 Serial0(out): StEnq, myseq 95, yourseen 198, DTE up datagramstart = 0x43FC, datagramsize = 14 FR encap =
RE: another question about BCMSN
My guess would be because the 5500 and 6500 are switches, not routers. -Original Message- From: Li Song [mailto:[EMAIL PROTECTED]] Sent: Thursday, December 21, 2000 1:20 AM To: [EMAIL PROTECTED] Subject: another question about BCMSN this question is quite confusing : which cisco router support multilayer switching ?? the choice is 4500,5500,6500,7500, the answer is 4500 and 7500 I don't know what is the purpose of this question , anybody can tell me why 5500 and 6500 is not correct ? _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Cisco 1601 AUI
There's nothing to configure. The AUI and RJ-45 interfaces go to the same internal logic board. Just plug a transceiver onto the AUI, plug your Ethernet cable into it, and you should be up running, unless there's something wrong with the innards of the router that is affecting the Ethernet mechanism altogether. -Original Message- From: Shane Stockman [mailto:[EMAIL PROTECTED]] Sent: Thursday, December 21, 2000 1:33 AM To: [EMAIL PROTECTED] Subject: Cisco 1601 AUI Could someone please provide some commands for configuring a 1601 AUI port as the ethernet one is blown. Thanks _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Pwd Question
I searched on CCO and can find no record of "no service password-recovery"; I don't believe there is such an animal. You're not using an older version of HyperTerminal, are you? The old version didn't send the break signal properly. You can try the newer version or a different terminal emulator altogether if this is the case. - Don -Original Message- From: Eric Fisher [mailto:[EMAIL PROTECTED]] Sent: Tuesday, December 19, 2000 12:54 PM To: [EMAIL PROTECTED] Subject: Pwd Question I have this router that someone must have entered no service password-recovery and I don't have the password. You are unable to get into Rommon to change the confreg. Is there a work around this or do I have to call Cisco. Thanks _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Pwd Question
Something just occurred to me: I remember reading once that IOS v11.3 was specifically made for a telco provider (Sprint?) without normal password-recovery features. Or perhaps it includes a feature to turn off password-recovery. Either way, is it possible you have a router with that IOS version on it? -Original Message- From: Eric Fisher [mailto:[EMAIL PROTECTED]] Sent: Tuesday, December 19, 2000 1:35 PM To: Taylor, Don Subject: Re: Pwd Question Please check out www.boerland.com/dotu http://www.boerland.com/dotu It is a pretty interesting site. Be careful don't try some of these commands on your production routers. They can locked up and cause a reboot. Some of the commands are useful for troubleshooting. Just remember they are no supported by Cisco. - Original Message - From: Taylor, Don mailto:[EMAIL PROTECTED] To: 'Eric Fisher' mailto:[EMAIL PROTECTED] ; [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] Sent: Tuesday, December 19, 2000 4:13 PM Subject: RE: Pwd Question I searched on CCO and can find no record of "no service password-recovery"; I don't believe there is such an animal. You're not using an older version of HyperTerminal, are you? The old version didn't send the break signal properly. You can try the newer version or a different terminal emulator altogether if this is the case. - Don -Original Message- From: Eric Fisher [ mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] ] Sent: Tuesday, December 19, 2000 12:54 PM To: [EMAIL PROTECTED] Subject: Pwd Question I have this router that someone must have entered no service password-recovery and I don't have the password. You are unable to get into Rommon to change the confreg. Is there a work around this or do I have to call Cisco. Thanks _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Truth being stranger than fiction....
In the New Testament, God showed the Apostle Peter that He was laying to rest all the rules regarding clean and unclean animals. In this context, perhaps Cisco can back off and stop enforcing their view that everything which makes reference to their company or their product line somehow violates their intellectual property. Thank you for that aside, Howard. I still remember the first time I heard you mention the Trouter. I keep waiting for one to come on sale on eBay. =) - Don -Original Message- From: Howard C. Berkowitz [mailto:[EMAIL PROTECTED]] Sent: Tuesday, December 19, 2000 8:32 PM To: [EMAIL PROTECTED] Subject: Truth being stranger than fiction Apparently, there are circumstances under which ciscos are certified, rather than doing the certification. Some discussions have questioned whether or not certain things are kosher or not, but there is a definitive reference: http://www.kosherquest.org/bookhtml/FISH.htm in which Rabbi Eliezer Eidlitz answers your questions about the dietary laws, including what fish are kosher. There is an cross-reference: "Cisco See: Trouts" To make this even more bizarre, look in the Cisco trademark section of the IOS 9.1 documentation set. You will find that Cisco trademarked the term "trouter," which was marketingspeak for a _t_erminal server _router_. It is my understanding, however, that trouters did not scale well and industry focus groups generally considered the idea sounded fishy. Scalability, according to the kosherquest site, is quite complex: "Fish which have fins and scales are kosher. Fish which only have fins are not kosher. Of the four types of scales, clenoid, cycloid, ganoid and placoid, only clenoid and cycloid scales are valid according to the Torah. Gandoid is the type found on sturgeon and placoid is found on shark.There is no prohibition against eating fish blood, other than the fact that people may think that a person is eating prohibited blood, and ritual slaughter is not required. "The scales must be true scales that can be removed without damaging the skin of the fish. As it says in the Torah - "These you may eat of the fishes, all that have fins and scalesS" (Vayikrah XI:9-12) Bony tubercles and plate or thorn-like scales that can be removed only byremoving part of the skin are not considered scales in this context. Some fish that have such scales, such as eels, lumpfish, shark,sturgeon, and swordfish, are not kosher." This further complicates the situation. If shark is scalable but nonkosher, that suggests that Cisco lawyers also are not kosher. Further, look at the back of many Cisco blades -- I'm thinking of a 4000 router NPM. What are those protrusions called? Cooling fins, eh? Coincidence? You decide. Perhaps the 4000 routers were discontinued because they had fins but were not sufficiently scalable. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: A challenge
Okay, I'll be the first to stick his neck out. I think the problem is that Host A is running Windows 2000. =) Okay, just kidding. I've been having problems with it lately, so I felt like bashing it a bit. Actually, it sounds like Host A might be on a separate hub partition or VLAN than Hosts B and C, so a normal ping would never go to the router and therefore fail. When the broadcast ping is used, it goes to the router and is passed on. -Original Message- From: Brian [mailto:[EMAIL PROTECTED]] Sent: Monday, December 18, 2000 6:07 PM To: [EMAIL PROTECTED] Subject: A challenge Here is an interesting challenge, that may not be so obvious to some of you. You were told to configure a network as follows: 10.1.1.1/8 router 10.1.1.2/8 hostA gw 10.1.1.1 10.1.1.3/8 hostB gw 10.1.1.1 10.1.1.4/8 hostC gw 10.1.1.1 hostA cannot ping hostB or hostC. hostB and hostC have no problem pinging eachother however, but cannot ping hostA. hostA does get a reply however from all hosts if it pings 10.1.1.255. What do you suppose the problem is? I'll let you know when someone posts the right answer. Brian --- Brian Feeny, CCNP+ATM, CCDP [EMAIL PROTECTED] Network Administrator ShreveNet Inc. (ASN 11881) _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Looking for Career Resume advice
Sounds like you're willing to consider relocation - that's a definite bonus for anyone looking for a CCNP. I have never needed a professional resume writer, but I also used to do desktop publishing, so I might have a leg up on the next guy in that regard. Basically, I just used the professional resume template in MS Word and tweaked it to fit me. As for places to look for work, I have not been able to beat www.net-temps.com. I get nearly all my responses from there, though I also get a handful from www.headhunter.net, and I usually also post on www.dice.com, but have never even gotten a nibble from them. Fairly often I get offers that include moving to a new area or even a new state. Once in a while I'll even see other countries listed. Basically, if you use these tools and have a resume that doesn't look like it was written by your cat, and are open to relocation, you will *NOT* have a bit of trouble finding a new position. - Don -Original Message- From: Eric Gunn [mailto:[EMAIL PROTECTED]] Sent: Sunday, December 17, 2000 8:43 AM To: [EMAIL PROTECTED] Subject: Looking for Career Resume advice Hello, I just completed my CCNP with a specialty in Security. I will soon be in the market for a new job and was looking for a little direction. Has any one use a professional resume writer and are they worth the money? Also, the area I live in Milwaukee,WI is not exactly an IT hotbed, although it does have some opportunity. Any areas that may be a better place to look for good IT jobs? Up until this point I have been in a "resume building" mode switching jobs as my education increases. I have self studied and paid for all my certifications, so I have not been using employers for anything but experience. I have just had to move along at each point were my education is not used at the current place of employment. I certainly plan on continuing my education. I plan on doing ATM and Voice over IP specialties, then moving on to the long road to CCIE certification. I am just looking for advice on getting a job that will be a good fit for me. Any advice is certainly appreciated. Thank You for listening. Eric _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: ISDN Simulator Ni1 or ATT Switch type
It really doesn't matter which one you choose. NI1 is a standard that will run on ATT's 5ESS and Northern's DMS switch types. If it were me, I'd get the NI1 standard, but there's not a heckuva lot of different in the configs of the two types. - Don -Original Message- From: Gordon Olson [mailto:[EMAIL PROTECTED]] Sent: Tuesday, December 12, 2000 4:35 PM To: [EMAIL PROTECTED] Subject: ISDN Simulator Ni1 or ATT Switch type I am going to purchase an ISDN Simulator and they want to know what switch type that I want, which type do I want? They have Ni1 or ATT, what is the one used for lab purposes? _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: What can CDP offer ?
CDP's benefit comes from getting said information *without* telnetting. I occasionally troubleshoot networks that have misconfigured IP addresses. Obviously if the IP is wrong, I can't telnet to some sites. But with CDP I can see the address that the far end is advertising, and change my IP so I can telnet to it. Once there, I can fix the wrong IP, the connection will drop me back to my original router, and I can change the local IP - all fixed! Without CDP I wouldn't know the far end's IP. That's just one application, but one that has saved my bacon a few times. - Don -Original Message- From: CCIE TB [mailto:[EMAIL PROTECTED]] Sent: Tuesday, December 12, 2000 8:26 PM To: [EMAIL PROTECTED] Subject: What can CDP offer ? Hi group members, I'm just wondering...if you can access a router by telneting to it, you can get most of the information that you will get through CDP. Then what is the benefit of CDP? Thanks to all Adia _ Get more from the Web. FREE MSN Explorer download : http://explorer.msn.com _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: 2610 csu/dsu configuration
Title: RE: 2610 csu/dsu configuration There's not too much to it. HDLC is the default encapsulation, so you won't have to change that. And if the second router you're connecting too has a Cisco internal CSU, they'll have the same default. Basically you just need to put clocking on one of the routers and that should do it. The command is clock rate ? (you get to choose the speed - might as well go with the fastest, 400). The commands for configuring your CSU, though, are (in interface config mode) service-module t1 ? (get the list). The ones I use most often are: service-module t1 timeslots 1-24 speed 64; this sets the CSU up for 24 channels at 64K per channel (T1 speed) service-module t1 linecode b8zs; B8ZS line coding, as opposed to AMI (your provider can tell you which one to use) service-module t1 framing esf; ESF or SF are your framing choices Hope that helps. Lemme know if you need something else. - Don -Original Message- From: Kelly Scroggins [mailto:[EMAIL PROTECTED]] Sent: Friday, December 01, 2000 12:35 PM To: [EMAIL PROTECTED] Subject: 2610 csu/dsu configuration Can someone point me to some good documentation on how to configure the csu/dsu module in a 2610 for a plain ordinary hdlc t1 connection? Thanks, kelly _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: O/T ballots-per-second musings
Title: RE: O/T ballots-per-second musings I saw something on www.vote.com, I believe, that asked people their feelings about voting via computer over the Internet. I took a tour years ago through the San Francisco mint and was shown a huge scale that they used to weigh gold, coins, etc. It was a weight-counterweight type - not electronic, although they had access to electronic ones - and was the preferred type to use because it couldn't be easily mishandled or misconfigured. I think the voting method is similar to this. Look at all the accusations (well deserved, IMNSHO) flying after the hand recounts. People have an interest in who wins; machines don't. And if we were to move toward some method of electronic voting, how can we secure that so that there is no question - ever! - of tampering? I don't think it can be done. Someone would have to program the ballots, and who's to say s/he wouldn't use political bias to throw in some code that accidently dropped every third vote from the opposing party? Also, circuits certainly aren't tamper-proof. A few years with Pacific Bell taught me that Joe Farmer can backhoe an OC circuit in nothin'-flat, knocking out entire communities. I agree that the current mess sucks, but I don't think we networking professionals will be called in to fix it until we can produce a magic box that is completely tamper-proof and transmits over quarks. Until then, just mail all your ballots to me and I'll fill 'em out right for you. =) - Don -Original Message- From: Priscilla Oppenheimer [mailto:[EMAIL PROTECTED]] Sent: Thursday, November 30, 2000 7:14 PM To: [EMAIL PROTECTED] Subject: O/T ballots-per-second musings Has anyone figured out the ballots-per-second (bps) transmission rate for the ballots that travelled in a Ryder truck from Palm Beach County to Tallahassee? ;-) Seriously, do we recognize how ridiculous this situation is? With current technology, the data should have arrived in seconds. We seem to have scraped by the year 2000 without any major disasters caused by Y2K bugs. However, the year 2000 election is a victim of ancient, buggy punch-card readers. I call this the E2K problem. The punch card readers in Miami-Dade County were unable to detect a vote for president on 10,000 ballots. That's outrageous! Regardless of any political wrangling about the significance of this problem, as computer professionals, we should be asking ourselves, how could this happen? We now have two kinds of proof (Y2K and E2K) that we need to take a more active role in working with our users to dump ancient systems and upgrade to newer and less buggy solutions. That's not an easy task, of course. Finances, office politics, and risk aversion are just some of the many reasons that users don't upgrade. But what are we doing to be more proactive? Are we monitoring our systems to determine their fragility? Are we taking action when we recognize potential problems? Are we designing reliable systems that can adapt to changes? Or are we hiding behind our 21-inch monitors and praying that nothing bad will happen on our shift? I'd like to see the computer industry get serious about developing less buggy systems and upgrading legacy systems that are failure-prone. I'd welcome a technical (non-political) discussion on this topic. Thanks for listening to my ravings. ;-) Priscilla Priscilla Oppenheimer http://www.priscilla.com _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: 2610 csu/dsu configuration
Title: RE: 2610 csu/dsu configuration Yes, you're right; I wasn't specific enough, I suppose, in my explanation. I know the encapsulation is configured on the router under the interface and that it's separate from the CSU. Since the question indicated configuring the CSU for HDLC, I mentioned that she didn't need to change it. I should have specified that even if she had to, it would be separate from the CSU. My bad! =( Sorry, if I've confused anyone. - Don -Original Message-From: Chuck Larrieu [mailto:[EMAIL PROTECTED]]Sent: Friday, December 01, 2000 4:02 PMTo: Taylor, Don; [EMAIL PROTECTED]Subject: RE: 2610 csu/dsu configuration Don, I believe that a CSU is a layer one device. I have never seen any option on any CSU I have ever worked with, internal or external, for line encapsulation. It is always AMI / B8ZS and SF / ESF choices. on the router interface is where you configure HDLC or PPP. ( Or SDLC or SMDS or frame relay, for that matter. ) This is done with both internal and external CSU's. notice that within the Cisco config, you even differentiate between the serial interface and the service module when issuing commands. Chuck -Original Message-From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Taylor, DonSent: Friday, December 01, 2000 2:38 PMTo: 'Kelly Scroggins'; [EMAIL PROTECTED]Subject: RE: 2610 csu/dsu configuration There's not too much to it. HDLC is the default encapsulation, so you won't have to change that. And if the second router you're connecting too has a Cisco internal CSU, they'll have the same default. Basically you just need to put clocking on one of the routers and that should do it. The command is "clock rate ?" (you get to choose the speed - might as well go with the fastest, 400). The commands for configuring your CSU, though, are (in interface config mode) "service-module t1 ?" (get the list). The ones I use most often are: "service-module t1 timeslots 1-24 speed 64"; this sets the CSU up for 24 channels at 64K per channel (T1 speed) "service-module t1 linecode b8zs"; B8ZS line coding, as opposed to AMI (your provider can tell you which one to use) "service-module t1 framing esf"; ESF or SF are your framing choices Hope that helps. Lemme know if you need something else. - Don -Original Message- From: Kelly Scroggins [mailto:[EMAIL PROTECTED]] Sent: Friday, December 01, 2000 12:35 PM To: [EMAIL PROTECTED] Subject: 2610 csu/dsu configuration Can someone point me to some good documentation on how to configure the csu/dsu module in a 2610 for a plain ordinary hdlc t1 connection? Thanks, kelly _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Internet ?
Title: RE: Internet ? Try http://www.internet2.edu/html/infokit.html. - Don -Original Message- From: Andre Fecteau [mailto:[EMAIL PROTECTED]] Sent: Thursday, November 30, 2000 12:37 PM To: [EMAIL PROTECTED] Subject: Internet ? Hello, I was wondering if anyone knows a site that would have a graphical map of the ISP's showing how they are connected? Of course I don't expect the map to have every connection, but I was hoping for a basic map showing how the ISP's are interconnected. I was also wondering if someone knew a good site to get an explanation of how all these Internet agencies work together? EX: RADB, RIR, ARIN, ICANN, IANA, RIPE, etc... I have a basic understanding, but going to the sites has been confusing me. Can anyone point out a site that really explains these things in a way a beginner can understand. I have been configuring alot of things on routers, but it wasn't untill I started working with BGP that I realized how little I knew about how the Internet is run! Help, Andre -- Unix Software Engineer [EMAIL PROTECTED] CNE3, 4 CCNA _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Internet ?
Title: RE: Internet ? I misread this earlier. I thought you were asking for a map of Internet2. Here's a map of the current internet: http://www.cs.bell-labs.com/who/ches/map/index.html -Original Message-From: Taylor, Don [mailto:[EMAIL PROTECTED]]Sent: Thursday, November 30, 2000 1:23 PMTo: 'Andre Fecteau'; [EMAIL PROTECTED]Subject: RE: Internet ? Try http://www.internet2.edu/html/infokit.html. - Don -Original Message- From: Andre Fecteau [mailto:[EMAIL PROTECTED]] Sent: Thursday, November 30, 2000 12:37 PM To: [EMAIL PROTECTED] Subject: Internet ? Hello, I was wondering if anyone knows a site that would have a graphical map of the ISP's showing how they are connected? Of course I don't expect the map to have every connection, but I was hoping for a basic map showing how the ISP's are interconnected. I was also wondering if someone knew a good site to get an explanation of how all these Internet agencies work together? EX: RADB, RIR, ARIN, ICANN, IANA, RIPE, etc... I have a basic understanding, but going to the sites has been confusing me. Can anyone point out a site that really explains these things in a way a beginner can understand. I have been configuring alot of things on routers, but it wasn't untill I started working with BGP that I realized how little I knew about how the Internet is run! Help, Andre -- Unix Software Engineer [EMAIL PROTECTED] CNE3, 4 CCNA _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Ip management
What level of management do you mean? If you're not DNSing or DHCPing, wouldn't you just want a spreadsheet saying what IPs are allocated to what hosts and which ones are left over? I know of a very large ASP that does this in MS Excel. - Don -Original Message-From: Emilia Lambros [EMAIL PROTECTED]To: Group Study [EMAIL PROTECTED]Date: Wednesday, November 29, 2000 8:29 AMSubject: RE: Ip management Are there any that do just the IP management? Most that I've seen do all sorts of DNS and DHCP stuff as well as manage IPs. I need something that will JUST help me manage a multitude of IP addresses - not provide DNS entries or make them available as a DHCP server :) Is there anything that anyone else has come across that has does LESS rather than more? I've been looking for about a year and come up with nothing :( Cheers, Em -Original Message-From: Irwin Lazar [mailto:[EMAIL PROTECTED]]Sent: Wednesday, November 29, 2000 3:35 AMTo: 'Palis Michael'; Group Study; CISCOSubject: RE: Ip management There are lots of good ones out there. Check out Lucent's QIP, Checkpoint's NetID, and Cisco's Network Registrar to name a few. If you search back issues of Network Computing, you'll find a couple of product comparisons and reviews. irwin -Original Message-From: Palis Michael [mailto:[EMAIL PROTECTED]]Sent: Tuesday, November 28, 2000 12:06 AMTo: Group Study; CISCOSubject: Ip management I am looking for an good IP management program able to manage several class C and privade addresses allocated to several customers. Can you suggest one? ../ Ppalis Micheal ../ e-mail: [EMAIL PROTECTED] ../ CYPRUS TELECOM. AUTHORITY FAX: + 357 2 486634../ Value Added Services www: http://www.cytanet.com.cy./ Telecommunications Str../ P.O.Box 24929, CY-1396../ Nicosia, Cyprus
RE: Study sanity
Title: RE: Study sanity Definitely been over a year. That was two jobs ago! =) -Original Message- From: Montgomery, Robert WARCOM Contractor [mailto:[EMAIL PROTECTED]] Sent: Tuesday, November 28, 2000 3:39 PM To: David Armstrong Cc: [EMAIL PROTECTED] Subject: RE: Study sanity Hasn't it been 6 months or a year since the Blueberry thread? -Original Message- From: David Armstrong [mailto:[EMAIL PROTECTED]] Sent: Tuesday, November 28, 2000 2:56 PM To: [EMAIL PROTECTED] Subject: Re: Study sanity Blueberries! ;-) Jim Healis [EMAIL PROTECTED] wrote in message [EMAIL PROTECTED]" TARGET="_blank">news:[EMAIL PROTECTED]... I'm interested in hearing remedies for those times when you have read so much, and keep rereading material because it's repeated in every book, that you feel a little dizzy, a bit disoriented, and ready to throw the books out the window. Let's hear what everyone has done, especially those CCIEs! -j _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Frame Relay Problem
Title: RE: Frame Relay Problem Maybe I'm missing something, but in looking at your config and cross-referencing the rules of the lab, I can't understand why you didn't just create two subinterfaces on R1. -Original Message- From: James Wilson [mailto:[EMAIL PROTECTED]] Sent: Sunday, November 26, 2000 5:50 PM To: [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Subject: Frame Relay Problem Hi All, I hope someone can shed some light on the problem I have come across in the following scenario : Three routers, R1,R2 and R3 all connected via a Frame Relay cloud with a router in the middle doing frame relay switching. The frame switch is _not_ fully meshed. R1 is acting as the hub with R2 and R3 being spokes off R1. Hence there is a PVC betweenR1 and R2 and a PVC between R1 and R3. There is _no_ PVC between R2 and R3. The particular lab exercise here specifies that each router much be able to ping every other router in the frame cloud. BUT the use of the 'frame-relay map' command is forbidden, and only R1 can be configured using a subinterface. As I have it configured R1 can ping both R2 and R3 as expected. However, both R2 and R3 can only ping R1 (the hub) yet cannot ping each other. The question stipulates you should use routing and not Layer2 to Layer3 mapping. A debug on the ping from R2 to R3 shows that there is no map entry for R3 hence encapsulation failed. A look at 'sh frame map' shows there is only 1 entry and it is for R1. This sh frame map is identical on R2 and R3. So the question is, how can I get R2 and R3 to be able to ping each other using routing and not the frame relay map command. It's got two of us here studying for our CCIE stumped, so im hoping someone out there has an idea as to how this can be accomplished. Also, as this is for the CCIE, static routes are not an option. Cheers. Jim. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Serial Inteface w/ builtin CSU/DSU question
It will run a self-test every time you reboot the router and you can view the results with a "show service-module" command. Here's the output from mine (the salient line is surrounded by asterisks that I added): Bravo#sho service-moduleModule type is T1/fractional Hardware revision is 0.80, Software revision is 1.07, Image checksum is 0x8510A6B6, Protocol revision is 0.1Receiver has no alarms.Framing is ESF, Line Code is B8ZS, Current clock source is line,Fraction has 24 timeslots (64 Kbits/sec each), Net bandwidth is 1536 Kbits/s*Last module self-test (done at startup): Passed*Last clearing of alarm counters 5d16h loss of signal : 0, loss of frame : 0, AIS alarm : 0, Remote alarm : 1, last occurred 5d16h Module access errors : 0,Total Data (last 96 15 minute intervals): 0 Line Code Violations, 0 Path Code Violations 0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins 0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail SecsData in current interval (262 seconds elapsed): 0 Line Code Violations, 0 Path Code Violations 0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins 0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs -Original Message-From: Raul Fernandez [mailto:[EMAIL PROTECTED]]Sent: Saturday, November 25, 2000 3:28 PMTo: 'Cisco group study'Subject: Serial Inteface w/ builtin CSU/DSU question Dear Group, Are there any built in test in CISCO routers with built in CSU/DSU that will let you test the CSU/DSU? I know about loop back test ect and debuging the serial interface itself but I am looking for commands that test the internal CSU/DUS specifically. Thank you for time. Sincerely, Raul
RE: How to Config DSU/CSU....
Title: RE: How to Config DSU/CSU An external CSU/DSU isn't configured within the router. It's usually configured either through the front panel display or via DIP switches. You'll want to verify at least three things on your CSU: line speed (number of channels), framing (ESF/D4), and line coding (B8ZS/AMI). You may also need to configure clocking, bit robbing, etc. It will help you immensely to have a manual for your CSU available. You may want to check the manufacturer's website, if they have one. Good luck! - Don -Original Message- From: Minh Vu [mailto:[EMAIL PROTECTED]] Sent: Thursday, November 23, 2000 10:12 PM To: '[EMAIL PROTECTED]' Subject: How to Config DSU/CSU Hi, How do I config EXTERNAL DSU/CSU on 1005 and 2501, I tried to simulate 56k link across those two, but I couldn't find the command or how to config this, before I was used cross-over between those two. The cross-over between two DSU/CSU was working (its display linked @56k) Here is my layout: 1005---DSU/CSUxDSU/CSU2501 DSU/CSU :Motorola 3512 IOS: 11.3.11aT1 here is int s0 of 2501 config: interface Serial1 ip address 50.0.0.1 255.0.0.0 no keepalive ! note I using HDLC encap. !note with this 2501 config, I got Serial1 is up, line protocol is up here is 1005 config interface Serial0 ip address 50.0.0.2 255.0.0.0 no ip mroute-cache bandwidth 56000 fair-queue 64 256 0 ! also using HDLC encap. !note with this 1005 config, I got Serial0 is up, line protocol is down Anyone have sample config on EXTERNAL DSU/CSU. I looked thru cisco site, they just have sample for INTERNAL only, which I don't have those command (ie: service-module , and T1-controller). Thanks _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Need help with converting IP address to MAC address
Title: RE: Need help with converting IP address to MAC address A MAC address is an address that is burned into an Ethernet NIC by the manufacturer. The first three (it is three, right?) octets identify the manufacturer. This address is completely independent of any network layer address you assign to the interface. That's why you can assign an IP address, a secondary IP address, an IPX address, and an AppleTalk address all to the same interface. It will still have the same MAC. The MAC is used in network segments to identify the next hop a frame must take, whereas a network layer address identifies the starting and ending points only. - Don -Original Message- From: Sisqo [mailto:[EMAIL PROTECTED]] Sent: Friday, November 24, 2000 12:15 PM To: [EMAIL PROTECTED] Subject: Need help with converting IP address to MAC address Cisco press book (BCMSN) does not really explain well the concept. I was wondering if someone can help me break the barrier. Example in the book: 224.163.163.45 = 01-00-5E-23-A3-2D I thought 163=A3, why is the 2nd octet converted to 23? Any help this would be appreciated. Thanks _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: annoying line after config t
Title: RE: annoying line after config t I believe you want no logging console. - Don -Original Message- From: Dennis Laganiere [mailto:[EMAIL PROTECTED]] Sent: Thursday, November 23, 2000 10:40 AM To: '[EMAIL PROTECTED]' Subject: annoying line after config t Isn't there a command to suppress the annoying 00:01:35: %SYS-5-CONFIG_i: Configured from console by console line and dramatic pause every time you exit the config term? I was so happy to learn the no ip domain-lookup command to suppress the pause every time you mistype a command, but this one still stumps me. You help is appreciated. Thanks... - Dennis _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Line Down , Protocol Up ?
Title: RE: Line Down , Protocol Up ? You're correct; it's an impossible situation. If the line's down (e.g. circuit is unplugged), there's no way for protocol to pass. I used to use this question as a brainbuster with my coworkers. =) - Don -Original Message- From: Phil Barker [mailto:[EMAIL PROTECTED]] Sent: Wednesday, November 22, 2000 11:21 AM To: cisco GroupStudy Subject: Line Down , Protocol Up ? Hi Gang, Just been looking at the binary possibilities of these options i.e 0 0 0 1 1 0 1 1 And feel thet that Line Down, Protocol Up is impossible. Can anyone confirm this or has anyone seen anything quirky of this nature. Regards, Phil. Do You Yahoo!? Get your free @yahoo.co.uk address at http://mail.yahoo.co.uk or your free @yahoo.ie address at http://mail.yahoo.ie _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: on Frame Relay
Title: RE: on Frame Relay The port itself can handle up to 256K; that's the port speed. You're paying for 64K (CIR), which is what you'll get on average. You will occasionally burst up to 256K when there is no other traffic on the circuit (it is shared bandwidth with other frame relay subscribers). This bursting is figured into the pricing (remember, you'll average 64K throughput, even though you may not get exactly 64K all the time). If you burst over your CIR for more than your alotted time slot (remember, they expect you to burst every once in a while) your packets will be marked as discard eligible and will be preferencially discarded if another customer is trying to transmit within CIR, such that the port would not be able to handle your extra data (you'll be relegated back to your own CIR). The pricing can be done differently, depending on the carrier. Some will bill you for your CIR plus any actual usage above CIR. Others allow you to burst up to the maximum available bandwidth as long as there is no other traffic for no extra charge. There's also a new animal on the frame relay front called 0-CIR, which means you don't elect a CIR at all, and pay only for actual usage. If this has been completely confusing, then the telco has done their job well. I think half the time they actually want their customers not to understand their pricing. Anyway, pardon my kvetching. =) Hopefully the technical details are helpful to you. - Don -Original Message- From: Rayappa Mayakunthala [mailto:[EMAIL PROTECTED]] Sent: Monday, November 20, 2000 11:23 PM To: [EMAIL PROTECTED] Subject: on Frame Relay Folks I have couple of questions on Frame Relay. When they say CIR is 64Kbps and the port is 256Kbps in a 64/256 FR link, what does that mean? Do I get CIR all the time and do I also get the port bandwidth all the time? How does this work? Do the service providers have the port bandwidth for each link or it is shared across? How does the pricing work, if somebody bursts upto the port speed all the time, does he get billed more? Cheers, Rayappa. The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender and delete the materialfrom any computer. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Failed CID (640-025)....
Title: RE: Failed CID (640-025) I've said this before, but I'll rant again: this exam sucks like a Hoover. It is, IMNSHO, not relevant to the real world. However, the certification is nice to have, and Robert Padjen's (Sybex) Cisco Internetwork Design is the best preparation for it that I've seen. - Don -Original Message- From: Aaron Moreau-Cook [mailto:[EMAIL PROTECTED]] Sent: Monday, November 20, 2000 7:22 PM To: cisco Subject: Failed CID (640-025) Can anyone tell me why I need to care about SNA, IPX, Token Ring, or ATM WAN Switches in the CID Exam? I was very disappointed in this exam, I've been reading this exam sucked. It really sucked when almost 20% of the questions were SNA, 20% were Token Ring I had a few ATM WAN Switches, but I have never needed or seen one before. Working at a content provider I don't have the luxury to order a strand of fiber and try to make a ATM network off of it. Question: What is the backplane of the BGX ATM Switch Have? a) 9.6 gbps b) 1.2 gbps c) 45 mbps d) I have never seen a BGX ATM Switch before. Lame... Lame... Lame... I'll be retaking this exam on Monday. Score: 500/1000, 650 needed to pass. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Off Topic - Apologies for my HEATED RESPONSE
Title: RE: Off Topic - Apologies for my HEATED RESPONSE They take routers out of your lab just 'cause??? Holy crap, I'd get in there with a shotgun if I were you. Let some of them feel your pain. -Original Message- From: Craig Johnson [mailto:[EMAIL PROTECTED]] Sent: Saturday, November 18, 2000 12:19 PM To: 'Louie Belt'; '[EMAIL PROTECTED]' Subject: RE: Off Topic - Apologies for my HEATED RESPONSE Man, you hit the nail on the head with that one. I take my lab December 13 and I get more irritable everyday. Maybe it's because my coworkers don't understand or care why I'm doing it, or don't see the difficulty in it. It's especially hard when you get no support from your job in studying. When coworkers have no qualms in taking routers out of your lab just because yours are setup and its convenient to do so. That's why this list is so invaluable, you have to have someone that can relate to you. Hopefully, my stress will die down soon enough. :) -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Louie Belt Sent: Saturday, November 18, 2000 1:35 PM To: 'Patrick Bass'; [EMAIL PROTECTED] Subject: RE: Off Topic - Apologies for my HEATED RESPONSE Chuck, Don't worry about it. Anyone who is truly in prep mode for the CCIE lab knows exactly how you feel. After spending months using every spare moment preparing for my lab, I can guarantee you I've snapped at people for a lot less. Only those who are in true prep mode (or those who have been through it - and been successful) can possibly understand the amount of work it takes to get through it. I agree with your sentiments, it's not for slackers, and those who are not willing to spend the time to get the answers for themselves should not even consider wasting their time (or Cisco's) in pursuit of the CCIE cert. Just keep in mind that the number of CCIE wanna-be's outnumber CCIE's 10-1. Keep struggling forward!! Louie Whatever my personal situation, and the situations of certain others around me, it is not right for me to vent on individuals, or on the list itself, for whatever reason. So, Mr. H. Pun, please accept my sincere apology for my unkind remarks. Best wishes in your pursuit of your dreams. Chuck _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: BGP book
Title: RE: BGP book Bassam Halabi's Internet Routing Architectures (Cisco Press, ISBN 157870233X) is the definitive guide. -Original Message- From: Kenneth Lorenzo [mailto:[EMAIL PROTECTED]] Sent: Saturday, November 18, 2000 1:21 PM To: [EMAIL PROTECTED] Subject: BGP book can anyone recommend a book that has extensive coverage of BGP? Thanks! Kenneth _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Broadband
Here, try these on for size: Broadband = http://www.its.bldrdoc.gov/fs-1037/dir-005/_0722.htm Baseband = http://www.its.bldrdoc.gov/fs-1037/dir-004/_0543.htm Hopefully this will help. The entire glossary is located at http://www.its.bldrdoc.gov/projects/t1glossary2000/(and ignore what it says about being offline until 11/18 - it definitely worked for me. =) - Don -Original Message-From: Chris Larson [mailto:[EMAIL PROTECTED]]Sent: Friday, November 17, 2000 11:22 AMTo: [EMAIL PROTECTED]Subject: Broadband Why is everyone referring to DSL as broadband? My understanding of broadband would leave me to think that DSL is not broadband at all. What gives?
RE: Broadband Wireless...
Title: RE: Broadband Wireless... I'm not familiar with the content of this site (just found it by searching when you mentioned it), but it looks to have some good information. Hope it helps. http://wi.pennwellnet.com/home/home.cfm - Don -Original Message- From: McMasters, Eric [mailto:[EMAIL PROTECTED]] Sent: Friday, November 17, 2000 10:44 AM To: '[EMAIL PROTECTED]' Subject: Broadband Wireless... Hey there everyone I was wondering if anyone had any good resources, such as white papers, etc on broadband wireless technology. I'm looking for both high level documentation and some down and dirty stuff also, so that I can become familiar with this technology. I've been checking out the Cisco site and found some info on their product line, but I'm looking for something more along the lines of tech docs. Any assistance would be greatly appreciated! Thanks! Eric McMasters _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Free Book: Telecom Networking Glossary
Title: RE: Free Book: Telecom Networking Glossary Mind reels? Does that have anything to do with monkeys and the Internet? - Don -Original Message- From: Chuck Larrieu [mailto:[EMAIL PROTECTED]] Sent: Friday, November 17, 2000 12:31 PM To: Howard C. Berkowitz; [EMAIL PROTECTED] Subject: RE: Free Book: Telecom Networking Glossary Wrong list again, Howard. That's twice today. Discussion of reels should be directed to one of the classic film lists. :- Chuck -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Howard C. Berkowitz Sent: Friday, November 17, 2000 12:02 PM To: [EMAIL PROTECTED] Subject: RE: Free Book: Telecom Networking Glossary I agree with Priscilla, this list is a voice of technical knowledge and camaraderie, it is important to maintain integrity on all fronts even if that means banning shameless vendor plugs. Shameless vendor plugs? Like a DB60? Shameless crossover, rollover cables...the mind reels. :-) _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Scripts for IOS upgrades
Title: RE: Scripts for IOS upgrades I used to do this a lot for Pacific Bell - all by myself. I created my own scripts; they aren't difficult at all. Here's my method: Group all your like models of routers together and stack them them on top of each other, plugged in and booted up. Get a copy of a terminal emulator (HyperTerm or whatever), the IOS image you need, and a TFTP server on a workstation. You'll need a console cable and an Ethernet crossover cable too. Console to the router and configure the router with a temporary e0 (or e0/0 or whatever) address on the same subnet as the workstation. Now go through the motions of TFTPing the image to the router. When you're done, just copy all of the information you entered into the router to a text file, e.g.: config term int e0 ip addr 10.1.1.1 255.255.255.0 (assuming the workstation is on the 10.1.1.0 subnet...) no shut exit copy tftp flash 10.1.1.2 (workstation IP) c1600-y-mz.112-16.P (image name) y (answer to 'do you want to overwrite current image') y (answer to 'do you want to erase flash') (I believe you will have to enter the final carriage-return (Confirm?) manually. Sit back and watch the go by. When they're done, reboot the router, switch your cables to the next router, and dump your text file to the terminal emulator to start all over again. When the last router is done, you can switch your console cable back to the first router to confirm that the new image is working properly - and as long as you never saved the config, the ethernet interface will still have it's original address. Hope this helps. (BTW, it's obviously even faster if you can use a FastEthernet interface...) - Don -Original Message- From: Tammy Slater [mailto:[EMAIL PROTECTED]] Sent: Friday, November 17, 2000 2:01 PM To: [EMAIL PROTECTED] Subject: Scripts for IOS upgrades All, We support over 500 components and different models of Cisco hardware. We need to upgrade IOS levels in a fast way. I would imagine using some type of script with checks and balances would do the trick. Has any one used such a creature...? Where could I find a creature like this as fast, as fast can be...? Thanks in advance for your help. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Free DSL whitepaper
Title: Free DSL whitepaper Hey, all, After the question was brought up regarding DSL being broadband, I did some searching and found a well written and engaging whitepaper on the subject. http://www.virata.com/pdf/virata_dsl2.pdf Happy reading! - Don
Agreeing to disagree, WAS Free Book: Telecom Networking Glossary
Title: Agreeing to disagree, WAS Free Book: Telecom Networking Glossary Ladies and Gentlemen, that was, without a doubt, one of the most genteel and mutually respectful exchanges, where there existed a disagreement, that I have witnessed on this list in the time I've been a member. Thanks to all of you (well, *most* of you...) for the reminder that we don't have to be @$$holes to each other just because we hold contrary opinions. I'm glad to see that there are actual adults on this list. I was beginning to think I was surrounded by children... rude, opinionated, stupid children in need of a severe beating. - Don -Original Message- From: David Armstrong [mailto:[EMAIL PROTECTED]] Sent: Friday, November 17, 2000 3:14 PM To: [EMAIL PROTECTED] Subject: Re: Free Book: Telecom Networking Glossary Jim, On the contrary, I feel like I caused offense. I have very high respect for Priscilla and had no intention of getting this barrage started. David Jim Erickson [EMAIL PROTECTED] wrote in message 8v4d8u$h3l$[EMAIL PROTECTED]" TARGET="_blank">news:8v4d8u$h3l$[EMAIL PROTECTED]... Martin-Guy Richard [EMAIL PROTECTED] wrote in message [EMAIL PROTECTED]" TARGET="_blank">news:[EMAIL PROTECTED]... Ho please David, keep sending link to free book. I understood that you copied and pasted the Email... I didn't notice it was a copy/paste when I posted earlier - I thought it was posted by someone at Cisco. Sorry, David, if I caused any offense. ---JRE--- David Armstrong wrote: This has really gone a lot farther than I ever meant. I simply received the email from Cisco and cut-n-pasted it into this newsgroup thinking that a glossary on Telecom and Networking might be useful to have as a reference. I guess I should have just put down free book go here rather than the content of the email I received. I apologize for the confusion and for starting a degradation thread for Top Down Network Design. I think it's an awesome book that every network engineer should have. Now, please let's stop this discussion. If someone wants the book just go get it. Thanks and once again, I apologize. David Armstrong _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Thoughts on the 640-25 CID exam
It's anything but straightforward. It bobs and weaves all over the place. IMHO, knowing the material is not enough to pass this exam; you should get a good study guide (Robert Padjen's Cisco Internetwork Design Guide by Sybex is the best I know of - don't even bother with the Cisco Press book) to prepare you for how the test presents itself and how to read and interpret the questions and multiple choice answers. - Don ""Craig E. Smith"" [EMAIL PROTECTED] wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... I'm getting ready to take the CID 640-025. Does anyone have any info about the exam. Is it as straight forward as the objectives outlined? Thanks Craig E. SmithNetwork EngineerLightbridge, Inc.(781) 359-4287www.lightbridge.com
RE: Motorola ISDN question
Title: RE: Motorola ISDN question My suggestion would be to visit www.motorola.com and see if you can find the specs for it there, or at the very least, find their support phone number and give 'em a call. - Don -Original Message- From: Sar Feng [mailto:[EMAIL PROTECTED]] Sent: Friday, November 17, 2000 11:00 PM To: [EMAIL PROTECTED] Subject: Motorola ISDN question I have a motorola ISDN NT1, but have no power adapter, any one can help me , tell me what kind of A/C it needs? thanks sar _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Ethernet Frame
Title: RE: Ethernet Frame Remember that frames are a Layer 2 entity; they aren't aware of network addressing. All a frame knows or cares about is how to reach the next device. That being the case, Host B would see the source MAC address of the local router. IP and other Layer 3 addresses tell you the start and finish points; MAC addresses tell you step by step by step how to get from one to the other. - Don -Original Message- From: Martinez, Carlos [mailto:[EMAIL PROTECTED]] Sent: Thursday, November 16, 2000 3:00 PM To: '[EMAIL PROTECTED]' Subject: Ethernet Frame hello all, I had somebody ask me what the source mac address would be on a frame sent across a serial link connected by to two routers, for example: Host A sends a packet to Host B, which is on the other side of the wan link. what would Host B see and what where would he send his reply to.(the local router or Host A or what) thanks in advance _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: a question about enable secret 5 abcd1234
Title: RE: a question about enable secret 5 abcd1234 You'll need a keyboard, console cable, and a few hundred years. -Original Message- From: cslx [mailto:[EMAIL PROTECTED]] Sent: Thursday, November 16, 2000 8:33 PM To: [EMAIL PROTECTED] Subject: Re: a question about enable secret 5 abcd1234 but how can I do that,could you give me some more details? thanx Miller, Nathan (AZ15) [EMAIL PROTECTED] wrote in message [EMAIL PROTECTED]" TARGET="_blank">news:[EMAIL PROTECTED]... What you are seeing is an MD5 hash of the clear text password. Unlike the type 7 password there is no easy way to get the clear text password from the hash. I believe (I may be wrong) that an MD5 hash can be brute forced but it takes LOTS of processing power and time. Regards, Nathan -Original Message- From: cslx [mailto:[EMAIL PROTECTED]] Sent: Thursday, November 16, 2000 1:58 AM To: [EMAIL PROTECTED] Subject: a question about enable secret 5 abcd1234 the present question is : I know the password's encrypted text is abcd1234,but how can I know the clear text of the encrypted text abcd1234?that is to say, how can I know the real password?could someone tell me?thanx a lot _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Brute Forcing an enable secret
Title: RE: Brute Forcing an enable secret Any passwording scheme can be brute forced, given enough time, just a like an infinite number of monkeys on an infinite number of typewriters will eventually write all the works of Shakespeare. The idea behind MD5 hashing is that the ONLY hope of cracking it is in brute forcing it, which will take quite a while. Here's a webpage I found on the subject (I just entered brute force md5 at www.excite.com to find it) that you may find interesting: http://www.stack.nl/~galactus/remailers/attack-3.html (watch the word wrap). - Don -Original Message- From: Dave [mailto:[EMAIL PROTECTED]] Sent: Wednesday, November 15, 2000 10:07 AM To: Cisco Maillist Subject: Brute Forcing an enable secret Hello everyone I know that the type 7 passwords are reversed easily but the enable secret passwords (type 5) are a MD5 one way hash and cannot be reversed. I have read that they can be brute forced yet I haven't been able to find any programs out there that can do this. Does anyone know of any programs that will take in the MD5 hash of the enable secret and attempt to brute force it? tia Dave _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: question : ethernet collision rule of thumb...
Title: RE: question : ethernet collision rule of thumb... Yes, you will always have some collisions on a shared medium like Ethernet (obviously I'm not included a switched environment). The general guideline is that for IP you should have no more than 500 hosts on a flat network segment; IPX allows for 300; AppleTalk for 200; NetBIOS, 200; and a mix of protocols, 200. Again, this is just a guideline, which doesn't take some things into account, such as multicasting. I have not seen a guideline that specifies the percentage of collisions above which you should definitely segment. If anyone else has, please share. - Don -Original Message- From: E Joseph [mailto:[EMAIL PROTECTED]] Sent: Wednesday, November 15, 2000 4:34 PM To: [EMAIL PROTECTED] Subject: question : ethernet collision rule of thumb... I would first like to thank everyone. I have been a member of this groups for several years now. I have never actually posted a question, generally I just absorb others questions. I realise there is no concrete answer on this, BUT how many collision on a shared media ethernet segment does it take before having a problem?? I was just invovled in a situation where we had a hub hanging off a hub connected to our 6509. The switchport error disabled and I had to track the devices down. I beleive you will always see some collisions in a shared ethernet environment??? At what collision rate should you get worried??? How much does it take to shut a switch port down??? Thanks, Ed __ Do You Yahoo!? Yahoo! Calendar - Get organized for the holidays! http://calendar.yahoo.com/ _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Nothing get through at router
Title: RE: Nothing get through at router What else have you tried? Telnet? If you're getting ICMP replies, then you're getting to the router and so will other packets. If it were me, I'd console into the troublesome router and look for access lists. Barring that, start debugging. - Don -Original Message- From: KC Lee [mailto:[EMAIL PROTECTED]] Sent: Wednesday, November 15, 2000 9:01 PM To: [EMAIL PROTECTED] Subject: Nothing get through at router I can successfully ping a router, but nothing else seems to get through the router. What should I do? _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Default Ping Payload
Title: RE: Default Ping Payload I went through the motions of an extended ping on my router, answered yes to extended commands, and one of the options there is the data pattern to use. It appears the default is 0xABCD. I didn't get this result by sniffing, so I may be wrong, but... good luck. - Don -Original Message- From: John Neiberger [mailto:[EMAIL PROTECTED]] Sent: Monday, November 13, 2000 11:54 AM To: [EMAIL PROTECTED] Subject: Default Ping Payload When conducting ping tests from one of our remote routers, I get anywhere from 5-13% packet loss when using the default ping payload, yet when I change the payload to anything else--such as all ones, all zeroes, alternating ones and zeroes--I get no packet loss whatsoever. This holds true regardless of packet size. However, when using the default data pattern, larger packets get dropped more often than smaller packets. We are seeing zero input or output errors on this interface. This seems VERY strange to me, but I think I'll get closer to an answer when I find out what the default pattern is. Do any of you know what that is? TIA, John Neiberger ___ Tired of slow Internet? Get @Home Broadband Internet http://www.home.com/xinbox/signup.html _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: lock and key (and telnet)
Title: RE: lock and key (and telnet) Thanks, Brian. This will be one of the e-mails I keep archived. =) - Don -Original Message- From: Brian [mailto:[EMAIL PROTECTED]] Sent: Monday, November 13, 2000 1:26 PM To: [EMAIL PROTECTED] Subject: Re: lock and key (and telnet) Responding to my own email. I found that you don't have to set autocommand access-enable on the vty ports themselves, that you can actually apply this to a username: username jim pass foo username jim autocommand access-enable host and then jim would use dynamic access lists, other logins not configured for autocommand access-enable host would get normal CLI access to the router. Brian On Mon, 13 Nov 2000, Brian wrote: I have a question regarding lock and key. If I configure my vty's for autocommand access-enable host, then how can I telnet to my router? I mean, from then on out it will just log you out after logging in (and set the dynamic access-list). What if I have a router with s0 (wan side/internet) and e0 (lan side), and I want to be able to telnet to the router, to configure it from the lan side, and I want users to be able to telnet to the router from the wan side to set lock and key...is this even possible? From what I am seeing, is that once lock and key is in effect on vty's, you: 1. have to have an input access list on the interface you enter the router on (else it complains) 2. are immediatly logged out, and the dynamic access-list set, and their is no way to get into the router via vty. Brian --- Brian Feeny, CCNP, CCDP [EMAIL PROTECTED] Network Administrator ShreveNet Inc. (ASN 11881) --- Brian Feeny, CCNP, CCDP [EMAIL PROTECTED] Network Administrator ShreveNet Inc. (ASN 11881) _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Clarification Question: ^Z, EXIT, END
Title: RE: Clarification Question: ^Z, EXIT, END Ctrl-Z and end both take you out of config mode from wherever you are. Exit will take you out of config mode if you're at the Router(config)# prompt. If you're at any other prompt, such as Router(config-if), Router(config-router), etc., it will take you up one level (i.e. from a subinterface to the interface, or from an interface to global config). Configuration mode just means you're configuring the router on some level, non-specific. Global configuration mode is being explicit that you are at the Router(config)# prompt. Hope that clears it up for you. - Don -Original Message- From: Reel, JohnX [mailto:[EMAIL PROTECTED]] Sent: Monday, November 13, 2000 2:54 PM To: '[EMAIL PROTECTED]' Subject: Clarification Question: ^Z, EXIT, END Afternoon. In the Cisco CCNA Exam #640-507 Certification Guide Book, page , I am missing a clarification of terms used here... Use Ctrl+Z from any part of configuration mode (or use the exit command from global configuration mode) to exit configuration mode and return to privileged EXEC mode. The configuration mode end command also exits from any point in the configuration mode back to privileged EXEC mode. The exit commands from submodes or contexts of configuration mode back up one level toward global configuration mode. - Is there a clean and simple explanation as to what and when to use the particular commands? - In the real world and in the CCNA test... Is there a reason that the Global configuration mode and Configuration mode are different? _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: To the people going after free stuff
Title: RE: To the people going after free stuff How is this taking advantage of Cisco? You find a free book, courtesy of Cisco and groupstudy, get it for free. Maybe you read it and turn around and sell it to someone else who can use it; maybe you *don't* read it, but make it available to someone who wants it. Where exactly is the harm? Cisco's paid the publisher, and Cisco will make money off anyone who implements their technology in response to reading the book Cisco paid for. - Don -Original Message- From: chris fong [mailto:[EMAIL PROTECTED]] Sent: Friday, November 10, 2000 9:27 AM To: [EMAIL PROTECTED] Subject: To the people going after free stuff I know most people getting free stuff from cisco are doing it for thier personal use, but I am disgusted at those who turn around and sell them on Ebay. You would not believe how many items I have come across on Ebay; t-shirts, books, you name it, its on Ebay. The most recent item being the free book:Optical Networks, A Practical Perspective. To those who take advantage of Cisco by doing this, you make me sick!! Just had to vent! Thanks __ Do You Yahoo!? Thousands of Stores. Millions of Products. All in one Place. http://shopping.yahoo.com/ _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: How to verify the CIR from my router?
Title: RE: How to verify the CIR from my router? Try debug frame-relay lmi and wait for the full status enquiry (takes place every 6 updates, or 60 seconds, by default). If the switch is providing the CIR information in its updates, this is where you'll see it. - Don -Original Message- From: Jack Walker [mailto:[EMAIL PROTECTED]] Sent: Wednesday, November 08, 2000 12:35 PM To: [EMAIL PROTECTED] Subject: Re: How to verify the CIR from my router? Jeff, I am not user taffic shaping, so I am not sure which command can help me here, I do have cisco encap, but I tried all those show frame ? commands, no luck. Thanks Jack -- Jeff McCoy [EMAIL PROTECTED] wrote in message 8ucblc$msb$[EMAIL PROTECTED]" TARGET="_blank">news:8ucblc$msb$[EMAIL PROTECTED]... I believe that encap frame-relay cisco will display CIR from the cloud switch, other encaps will not. Jack Walker [EMAIL PROTECTED] wrote in message 8ucb78$kpr$[EMAIL PROTECTED]" TARGET="_blank">news:8ucb78$kpr$[EMAIL PROTECTED]... All, Just want to ask how I could verfify/display the CIR of my PVC? I know we could throw traffic to verify this, but I just got a new PVC on a production router(we just add a new PVC on our production T1), so I can not push traffic to the production router just to verify the PVC. Is there any other ways to verify the CIR? Thanks Jack _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: CID Test
Title: RE: CID Test Forget the Cisco Press book; in my opinion it bounces around from topic to topic and doesn't address any single item deeply enough to be terribly helpful. Top-Down is a good book for all around network design topics, but isn't geared toward the exam. My personal preference for CID preparedness is Robert Padjen's (Sybex) Cisco Internetwork Design. - Don -Original Message- From: Hubert Pun [mailto:[EMAIL PROTECTED]] Sent: Wednesday, November 08, 2000 9:13 PM To: Cisco Study Group Subject: CID Test I am planning to write the CID test. Which book, the Cisco Press CID book or the Top Down Network is more useful for passing the exam? and btw, which book is more useful for the CCIE written exam? and which one is actually more useful in real life? thanks in advanced _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: DNS Problem
Title: RE: DNS Problem DNS using random ports is a new one on me. I've never heard of that, but would be interested in learning more if you have a resource to suggest. Are you implementing the access list correctly? Remember that port 53 is the source, not the destination. I have a similar setup in my home lab and the rule is: access-list 101 permit tcp any eq 53 any log. - Don -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Sent: Monday, November 06, 2000 10:55 AM To: [EMAIL PROTECTED]; [EMAIL PROTECTED] Subject: RE: DNS Problem I believe you can also permit established connections which would do the same thing with a little more security. -Original Message- From: Frank Wells [mailto:[EMAIL PROTECTED]] Sent: Monday, November 06, 2000 12:02 PM To: [EMAIL PROTECTED] Subject: Re: DNS Problem I believe DNS uses random ports to communicate once it has established a session using port 53. This means you would need to open up the ports greater than 1023 for this to work. Perhaps someone can confirm this as my recollection of this is a little shaky. From: Millner, Gary [EMAIL PROTECTED] Reply-To: Millner, Gary [EMAIL PROTECTED] To: '[EMAIL PROTECTED]' [EMAIL PROTECTED] Subject: DNS Problem Date: Mon, 6 Nov 2000 12:14:30 -0500 I have a unique problem. I'm trying to put our firewall up using the Cisco IOS access-list commands. When I put it in place, with TCP and UDP ports 53 open, DNS will not work. We are using Windows 2000 Server as our DNS Server. Is there a bug in Windows 2000? Or does Windows 2000 use an additional port for DNS that I'm not aware of. Thanks. Gary Millner [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Share information about yourself, create your own public profile at http://profiles.msn.com. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: ubr924
Title: RE: ubr924 I was in the same boat, and with the same provider (@Home). You need to call them and ask a) whether your router is supported (my uBR924 wasn't on their supported equipment list), and b) whether they'll allow you to install your own equipment (I'm in a lease-only area, so I have to use their Motorola crap - bastards!). You shouldn't really have to do much of anything on your end; it's their network provisioning that is screwing you up. - Don -Original Message- From: Rick Holden [mailto:[EMAIL PROTECTED]] Sent: Saturday, November 04, 2000 5:08 PM To: [EMAIL PROTECTED] Subject: ubr924 I have a cable router that I am trying to get working in my house, but with no success. The problem is the service provider is not giving me an IP address and the IOS doesn't let me assign one. I believe that the service provider wants to assign it based on the hostname, because that how my PC gets it. Is there a way to send the router's hostname in the DHCP request? Or does anyone know how I can get an IP address on the cable interface. Any help would appreciated? Thanks? _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: COLT URL
Title: RE: COLT URL http://www.cisco.com/cgi-bin/front.x/wwtraining/colt/ColtLogin.pl -Original Message- From: Evan Francen [mailto:[EMAIL PROTECTED]] Sent: Tuesday, October 31, 2000 10:25 AM To: '[EMAIL PROTECTED]' Subject: COLT URL I know that the URL has been posted before, so I apologize for my oversight... Does anyone know the URL for COLT on Cisco's web site? Thanks in advance! Evan _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: RS lab - ATM gone?
Title: RE: RS lab - ATM gone? Nope. Just the lab. All items are still fair game on the written. -Original Message- From: Bond Jeffrey MSgt 93 CSS/SCON [mailto:[EMAIL PROTECTED]] Sent: Tuesday, October 31, 2000 12:45 PM To: 'Kirk Bollinger'; Chuck Church Cc: '[EMAIL PROTECTED]' Subject: RE: RS lab - ATM gone? I wonder does this apply to the written test also!! Jeffrey Bond, CCNP, MCSE NCOIC Network Operations (W) 912.497.2741 (F) 520.563.2993 mailto:[EMAIL PROTECTED] -Original Message- From: Kirk Bollinger [mailto:[EMAIL PROTECTED]] Sent: Monday, October 30, 2000 8:43 PM To: Chuck Church Cc: '[EMAIL PROTECTED]' Subject: Re: RS lab - ATM gone? It says just ATM LANE so CLIP, PVC MPOA are still possible topics. Just my guess. -Kirk On Tue, 31 Oct 2000, Chuck Church wrote: All, I'm a little curious about them taking ATM LANE off the lab. Why didn't they just say ATM? Is ATM without the LAN emulation supported on any Cisco devices that are part of the lab? I know they don't require you to set up ATM switching, but is it used in native mode on any of the AVVID products? _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Do you know any software which can emulate IBM PC as a Mac?
Title: RE: Do you know any software which can emulate IBM PC as a Mac? I'm not sure if you're asking for a PC emulator for the Mac or a Mac emulator for the PC. I know of SoftWindows, which will emulate Windows on a Mac and Executor (www.ardi.com), which will emulate Macintosh (System 7) on a PC. - Don -Original Message- From: Joseph J [mailto:[EMAIL PROTECTED]] Sent: Friday, October 13, 2000 8:28 AM To: [EMAIL PROTECTED] Subject: Do you know any software which can emulate IBM PC as a Mac? Sorry for interrupt! Joseph _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Cisco Pix Telnet Access
Title: RE: Cisco Pix Telnet Access Is this the only issue? Are you routing properly between VLANs? Can you ping the PIX? If telnet from VLAN2 is the only thing blocked, it sounds like a rule issue. -Original Message- From: p s [mailto:[EMAIL PROTECTED]] Sent: Thursday, October 12, 2000 11:18 AM To: [EMAIL PROTECTED] Subject: Cisco Pix Telnet Access To Cisco Study Group I have a Cisco 515 Pix Firewall that I cannot Telnet to from my 10.10.9.0 network. I just created VLAN 2 on my Cisco 6503 Switch, VLAN 2 contains the entire 10.10.9.0 network. VLAN1 contains the 10.10.10.0 network. My 6503 switch connects through an MSFC interface to a T1 which connects to our Data Center where the Pix Firewall is located. Does anyone have any ideas on what would cause this Telnet issue? Thanks for your help Paul Stapleton [EMAIL PROTECTED] __ Do You Yahoo!? Get Yahoo! Mail - Free email you can access from anywhere! http://mail.yahoo.com/ _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: 2500 router password recovery
Sounds like you're suffering from the older HyperTerminal where the break sequence didn't work properly. Get the new version from http://hilgraeve.com/htpe/download.html. It works fine. - Don -Original Message-From: Robert McIntire [mailto:[EMAIL PROTECTED]]Sent: Tuesday, October 10, 2000 9:25 PMTo: [EMAIL PROTECTED]Subject: 2500 router password recovery I'm working with a used 2514 router with an unknown enable password. I've tried the standard break technique but can't abort the boot sequence. I believe that break may be disabled. I'm using Win NT 4 and hyperterminal to connect to the console port and am able to connect and SHOW VERSION. I am getting terminal feedback. I've used CTRL-BREAK AND CTRL-SHFT-6 to no avail. How can I access ROMMON mode and change the password? Is there a jumper on the system board that can be used to circumvent the password and access the router for configuration? Any advice is appreciated, Thanks
SmartCertify CBT software for study
Title: SmartCertify CBT software for study Does anyone out there have experience/opinions on SmartCertify's (www.smartcertify.com) CBT offerings? I'm looking at possibly purchasing their Cisco IMCR package, which, I'm told, leads one through all sorts of theory about routing/switching (to fill in any gaps your current education left), information about the routers themselves (how the backplane operates, etc.), and includes a section that simulates IOS configuration of everything from setting the hostname to configuring BGP and IOS upgrades. Not only that, but the salesman told me they guarantee that you'll be ready for and PASS your CCIE lab (not written - he was specific) once you can work your way through the whole CBT. I was a bit skeptical, but he was insistent, so I'm interested in checking it out. But for such a magical product I was expecting the price to be on the order of $5 - $10K. Turns out it's only $1499. A guarantee like that for the price of a router is just too good to ignore, so I wanted to get some feedback from anyone that knows anything about these. Thanks! - Don
RE: Password encryption decoder
Title: RE: Password encryption decoder It can't be done. Cisco uses the MD5 algorithm for their secret passwords, which is a one-way hash. The hash is stored and when a password is entered, it's run through the algorithm. If the gibberish created matches the stored hash, access is granted. The *actual* password is never stored on the system. - Don -Original Message- From: Daniel [mailto:[EMAIL PROTECTED]] Sent: Tuesday, October 10, 2000 1:21 PM To: [EMAIL PROTECTED] Subject: Re: Password encryption decoder The Boson software works great for most password decryption. Do you know of any software that will decrypt enable secret passwords? The Boson software will not do it. Daniel Barnhill, Don [EMAIL PROTECTED] wrote in message [EMAIL PROTECTED]" TARGET="_blank">news:[EMAIL PROTECTED]... William, Try www.boson.com They have a free set of utilties that includes a tftp server, syslog server, and password decoder. Don Barnhill MCSE,ASE,CCNP,CCDA -Original Message- From: Plantier, William [mailto:[EMAIL PROTECTED]] Sent: Tuesday, October 10, 2000 10:13 AM To: '[EMAIL PROTECTED]' Subject: Password encryption decoder Where can I find the Password encryption decoder for Cisco encrypted passwords? Thanks Wm. Spencer Plantier LAN Engineer (919) 474-1300 ext 0873 Office (919) 474-1056 Fax (919)696-8848 Cell [EMAIL PROTECTED] **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: CCO #
Title: RE: CCO # Sign up for Cisco's consultant program for free. They'll give you CCO access, plus a whole box of goodies. http://www.cisco.com/warp/public/767/consultant-online.html - Don -Original Message- From: RAUNIYAR RAJEEV [mailto:[EMAIL PROTECTED]] Sent: Thursday, October 05, 2000 1:43 PM To: [EMAIL PROTECTED] Subject: CCO # hi all, could someone help me to know how to get CCO #. I do have the registration number of Cisco router with me. Regards. Rajeev **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Can any body tell me
Title: RE: Can any body tell me You must obtain the CCDA first, plus all the requirements for CCNP (which includes the CCNA), before continuing to the CCDP. -Original Message- From: Atif Naeem Siddiqui [mailto:[EMAIL PROTECTED]] Sent: Thursday, October 05, 2000 1:32 AM To: [EMAIL PROTECTED] Subject: Can any body tell me Dear All, Hi, I am continously memeber of this mailing list and i must say this is great side for the Cisco Persons. Today i got one prob. if you guys help me, it is really an appricaiate able efforts from your side, Basically i have done the CCNA and now i want to do CCDP is that Cisco have any Limitation on those person who have done the CCNA or not, means either the CCNA can do the CCDP or they have to CCDA first for doing this. Plz need your suggestions. Thanks Best Regards, Atif Naeem Siddiqui. Join 18 million Eudora users by signing up for a free Eudora Web-Mail account at http://www.eudoramail.com **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Failed CID!
Title: RE: Failed CID! Agreed - IN SPADES!! I studied the subject material on the objectives list and still managed to fail a few times. Finally I gave up and read an actual study guide that helped word the information the way the test words it (Robert Padjen's CCDA Study Guide by Sybex - Highly recommended!). This is simply the only way to go with the old Cisco tests. Knowing the material just isn't enough; you have to know the TEST. -Original Message- From: Brian [mailto:[EMAIL PROTECTED]] Sent: Friday, October 06, 2000 6:48 PM To: Hal White Cc: [EMAIL PROTECTED] Subject: Re: Failed CID! On Thu, 5 Oct 2000, Hal White wrote: I can't believe that I just failed the CID by six questions. I did not fail don't kick yourself too hard, its a pretty challenging test with a broad range of material. because I do not understand network design, I failed because the test was so horribly written. The questions were not hard, they were vague. There were several questions with typos and errors. This test was as bad as the old I saw some typos as well. The questions are actually probably intended to be vauge, intended so that the answer isn't obvious, or that maybe their are multiple answers...but which is best. CID test which I also thought was horribly written. I put in alot of study time, I read the CID book, watched the online CID class and I read several desing documents on Cisco's site. Hopefully, Cisco will rewrite this test soon because it is awful. Well, hopefuly you will re-take it soon too, while its still fresh in your head. At least now that you have seen the test, you probably know what to start readin up on. Then to make matters worse, I was mad driving back to my office and I wasn't paying attention and I got a speeding ticket. Hopefully my day will improve, because it could not get any worse. when it rains Brian _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Share information about yourself, create your own public profile at http://profiles.msn.com. **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] --- Brian Feeny, CCNP, CCDP [EMAIL PROTECTED] Network Administrator ShreveNet Inc. (ASN 11881) **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: anyone has Redback experience?
Title: RE: anyone has Redback experience? No firsthand experience with Redbacks, sorry to say. MPS = MPOA (Multiprotocol Over ATM) MPLS = MultiProtocol Label Switching; it's a relatively new standard (i.e. not specific to any vendor) that paints frames with an additional header. This speeds up switching because the switch doesn't have to disassemble the IP packet to find the layer two information. -Original Message- From: Jae Kang [mailto:[EMAIL PROTECTED]] Sent: Tuesday, October 03, 2000 7:33 PM To: '[EMAIL PROTECTED]' Subject: OT: anyone has Redback experience? Hi all, Does anyone have a good experience with Redback products? Also I think I have a good knowledge about the follwoing two term. MLS (Multilayer Switching - layer 3 switching term ) and MPS(Multiple layer server - ATM term.) But, what about MPLS(?) Is this redback-specific? Regards, _ Jae-Joon Kang - Senior Network Integration Engineer. Ipex Information Technology Group Ph: (07) 3406 5887 Fax: (07) 3406 5859 Mobile: 0410 556 107 E-mail: [EMAIL PROTECTED] Address: 88 Commercial Rd Newstead, Brisbane, Queensland, Australia _ This e-mail may be confidential. Any opinions expressed herein are the opinion of the writer unless there is an express indication to the contrary. If you are not the intended recipient of this communication please delete and destroy all copies and immediately reply by return e-mail. Ipex ITG disclaims all liability and responsibility for any direct or indirect loss arising from this e-mail and/or any attachments. **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Book for CCDA???
Title: RE: Book for CCDA??? http://www.lovegrove.co.uk/bgl/ccnaccda.html Scroll to the bottom for CCDA. -Original Message- From: Alex [mailto:[EMAIL PROTECTED]] Sent: Thursday, September 28, 2000 12:59 PM To: [EMAIL PROTECTED] Subject: Book for CCDA??? Hi I'm looking for a good CCDA book, any suggestions??? Thanks **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: CCDA summerization question
Title: RE: CCDA summerization question I'd have to agree with you. The best summarization possible is 172.16.0.0. -Original Message- From: John lay [mailto:[EMAIL PROTECTED]] Sent: Wednesday, September 27, 2000 12:24 AM To: [EMAIL PROTECTED] Subject: CCDA summerization question Guys, While studying for the CCDA, I found the following question in one of the exam preparation sites. The following IP addresses can be summaried by which bit of the 3rd octet 172.16.0.0, 172.16.64.0, 172.16.128.0, 172.16.192.0 --- 1st bit, first 2 bit, first 4 bit, last 6 bit I don't think that the following addresses could be summarized on any bit of the 3rd octet. If you have a look to the 3rd octet 172.16.0.0 --- 172.16..0 172.16.64.0 --- 172.16.0100.0 172.16.128.0--- 172.16.1000.0 172.16.192.0--- 172.16.1100.0 Could someone verify this with me guys ? Thanks a lot ___ Say Bye to Slow Internet! http://www.home.com/xinbox/signup.html **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Question
Title: RE: Question I believe you're talking about Network Address Translation (NAT). The basic elements involved are a pool of real IP addresses, a source list, an inside interface (usually Ethernet), and an outside interface (usually some type of WAN, e.g. serial, T1, etc.). Here is the URL of a sample NAT config I found on Cisco's website: http://www.cisco.com/warp/customer/556/1.html Remember to use the overload keyword in defining which pool your source list will be NAT'ed into. This keyword allows the same real IP (using different ports) to be used by multiple privately addressed hosts. Here's another example: http://www.cisco.com/univercd/cc/td/doc/product/software/ios113ed/113ed_cr/dial_c/dcprt11/dcnat.htm (watch the word wrap). - Don -Original Message- From: Question! [mailto:[EMAIL PROTECTED]] Sent: Wednesday, September 27, 2000 2:05 PM To: [EMAIL PROTECTED] Subject: Question How to use 10 Real IP for 100 COmputers How to set the router support this configuration? Please teach me and inform me what command I should use to set this config... **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Traceback tool?
Title: RE: Traceback tool? Try these. http://www.cisco.com/stack/Stack_help.html http://www.cisco.com/stack/stackdecoder.shtml -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Luong, David Sent: Tuesday, September 26, 2000 3:42 PM To: 'Cisco Group Study' Subject: Traceback tool? Hi guys (gals), I am looking for a traceback decoder and I know one is available on CCO but I can't seem to locate it! I asked the TAC to try to look but he gets several thousand hits on return...anyone have the url link? Sincerely, David Luong CCNP,CCNA,Network+,A+,i-Net+ Telecommunications Analyst Insurance Corporation of B.C. Vancouver, B.C CANADA http://www.syngress.com/authors/Product%20Engineers/MasterContribs.htm File: Luong, David.vcf (See attached file: winmail.dat)
RE: Precedence: Bulk and a fix for vactions autoresponders
Title: RE: Precedence: Bulk and a fix for vactions autoresponders That would be *awesome*! My Out of Office rule in Outlook is beginning to look pretty crowded since different e-mail programs have different ways of saying I'm not here. -Original Message- From: Paul Borghese [mailto:[EMAIL PROTECTED]] Sent: Tuesday, September 26, 2000 2:23 PM To: [EMAIL PROTECTED] Subject: Precedence: Bulk and a fix for vactions autoresponders Jennifer Joy sent me a suggestion that I include the Precedence: bulk header in the e-mail messages that go out from this list. Apparently the vacation program uses the Precedence to determine if it should send an auto-reply back. So maybe this will cut down on the amount of Out of Office messages we receive every time a post is made to the list. Thanks Jennifer for the idea! Paul Borghese **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: VPN help
Title: RE: VPN help I'm hardly a Windows expert, but Microsoft sure is. I just entered windows 2000 professional vpn into the search engine and came up with: http://www.microsoft.com/WINDOWS2000/guide/server/solutions/remote.asp#Productive -Original Message- From: Lakeman, DerrickX [mailto:[EMAIL PROTECTED]] Sent: Tuesday, September 26, 2000 3:05 PM To: '[EMAIL PROTECTED]' Subject: VPN help I have a client that has a small office of 3 computers (all running Windows 2000 Pro networked together via Ethernet)(Site A). One of the Windows 2000 Pro computers at his office acts as the 'server' and has a DSL line connected to it. He has a computer (Windows 95) in his mother's home running DSL (Site B), one in his home running DSL (Windows 95)(Site C), and a traveling laptop with a 56K modem (Windows 9x)(Site D). My understanding is Windows 2000 Pro doesn't support VPN so... What hardware and/or software product is best for creating a VPN over the internet? What server products and what client products are best? Thank you, Dirk Lakeman **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: FREE BOOK !!!!
Title: RE: FREE BOOK Actually, try this link. http://www.cisco.com/offer/avvid/1314_flash/1314_conclusion.html -Original Message- From: David Papin [mailto:[EMAIL PROTECTED]] Sent: Friday, September 22, 2000 8:18 AM To: [EMAIL PROTECTED] Subject: FREE BOOK Take a Look at this URL http://www.cisco.com/warp/public/779/largeent/avvid/ __ Do You Yahoo!? Send instant messages get email alerts with Yahoo! Messenger. http://im.yahoo.com/ **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Password for 2501
Title: RE: Password for 2501 http://www.cisco.com/warp/public/474/pswdrec_2500.html -Original Message- From: Danny Mok [mailto:[EMAIL PROTECTED]] Sent: Thursday, September 21, 2000 4:44 PM To: [EMAIL PROTECTED] Subject: Password for 2501 Hi all, We have a Cisco router 2501 sitting between the Internet and our firewall. A network infrastructure change involves a configuration change at the router. Unfortunately nobody seems to recall the password. Does anyone know how to hack into Cisco router 2501? Thanks in advance. Danny **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Interview questions
Comments inline: -Original Message- From: Plantier, William [mailto:[EMAIL PROTECTED]] Sent: Wednesday, September 20, 2000 9:04 AM To: [EMAIL PROTECTED] Subject: Interview questions Here are some question I had on a interview that I didnt know at least at the moment: What are the reserved PVC's and what are they reserved for? I'm not sure about this one. If he's asking what are reserved virtual circuits, I'd say the PVCs are, as opposed to SVCs. On the other hand, if he's asking what DLCIs are reserved, I've seen two slightly different lists, depending on the book you reference, but they are mostly similar. The one I'm currently looking in shows reserved DLCIs: 0 - LMI signaling 1-15 - Reserved (doesn't say what for) 16-991 Available (non-reserved) 992-1007 - Optional management information (rarely used) 1008-1022 - Reserved (doesn't say what for) 1023 - Other management function I believe that where the function is simply "Reserved," it depends upon the carrier's implementation of Frame Relay and/or the brand of switch used. In other words, "it depends." What is the proprietary protocol on the Catalyst's? The only thing I can think of here is Cisco's proprietary ISL trunking protocol. What are the four major configurations on a CSU/DSU? Pretty sure about this one: Number of channels (speed), Line Coding (B8ZS, AMI), Frame Type (ESF, D4), and Clock Source (internal, line). Not really crazy about the wording of the first two questions, frankly. I usually try to play to their egos if I know I don't know the answer to see if they'll offer it. At worst, I still won't know the answers after the interview; at best, I'll have the answers for next time. Hope this helps, - Don Thanks Spencer Plantier ATT Solutions LAN Engineer Phone (919) 474-1300 ext 0873 Cell (919) 696-8848 Fax (919) 474-1056 **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Another interview question
Absolutely. Use priority lists or customer queues. -Original Message- From: Plantier, William [mailto:[EMAIL PROTECTED]] Sent: Wednesday, September 20, 2000 12:02 PM To: [EMAIL PROTECTED] Subject: Another interview question Can you priortize traffic on a Frame relay network? Spencer Plantier ATT Solutions LAN Engineer Phone (919) 474-1300 ext 0873 Cell (919) 696-8848 Fax (919) 474-1056 **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Router for play @ home
I made the mistake of getting a 924 before checking with my cable company. Do that first to a) make sure your equipment will actually work with their network (they're going to have to reprovision your circuit anyway, so you may as well call them first), and b) make sure they allow you to have your own equipment on their circuit. I found out, to my dismay, that I am in a lease-only area right now, i.e. I hafta use their crappy Motorola modem. =( - Don -Original Message- From: Mike Sholar [mailto:[EMAIL PROTECTED]] Sent: Wednesday, August 23, 2000 5:29 AM To: Group Study Subject: Router for play @ home Hello people! Not exactly a cert question, but it applies. I will soon be getting cable intenet access at the house, and would like to purchase a cisco router to play with behind the cable modem. What series router should I be looking at, just to learn the ios and play around with. I am working on my CCNA, and realize a physical router is not necessary, but I will be progressing upwards and would like the experience. I looked at the 924 cable modem/router cisco sells, and the $899 price tag was a little much for play-time! Thanks for the input. Mike MCSE, MCP+I ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] * The information in this email is confidential and may be legally privileged. It is intended solely for the addressee. Access to this email by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, distribution or any action taken or omitted to be taken in reliance on it, is prohibited and may be unlawful. When addressed to our clients any opinions or advice contained in this email are subject to the terms and conditions expressed in the governing KPMG client engagement letter. * ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Which class should I take?
If you weren't already almost through the ACRC text, I'd say go for that one 'cause it's easily the most difficult. But if you're sure you don't need the classroom instruction, I'd say take the CIT. I found it to be the most relevant to the real world. - Don -Original Message- From: Miller, Nathan (AZ15) [mailto:[EMAIL PROTECTED]] Sent: Monday, August 21, 2000 7:59 AM To: [EMAIL PROTECTED] Subject: Which class should I take? I am pursuing CCNP certification I have an opportunity to attend a class covering one of the four tests. I am 80% through a couple of ACRC books, so I think that I will probably not chose BSCN. Of the remaining three courses, which would you attend? For which subject matter is classroom instruction most useful? Thanks in advance! Nathan Miller ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] * The information in this email is confidential and may be legally privileged. It is intended solely for the addressee. Access to this email by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, distribution or any action taken or omitted to be taken in reliance on it, is prohibited and may be unlawful. When addressed to our clients any opinions or advice contained in this email are subject to the terms and conditions expressed in the governing KPMG client engagement letter. * ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE:
Is anybody else getting loads of empty e-mails from Nobody? -Original Message- From: Nobody [mailto:[EMAIL PROTECTED]] Sent: Friday, August 18, 2000 8:47 AM To: undisclosed-recipients Subject: * The information in this email is confidential and may be legally privileged. It is intended solely for the addressee. Access to this email by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, distribution or any action taken or omitted to be taken in reliance on it, is prohibited and may be unlawful. When addressed to our clients any opinions or advice contained in this email are subject to the terms and conditions expressed in the governing KPMG client engagement letter. * ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Cisco 2600 RMON Hung.
Maybe I'm missing something here... you said you deleted the image and now can only boot to rommon? That's normal. Did you put a new image back into the router? -Original Message- From: Khalid Ahmed [mailto:[EMAIL PROTECTED]] Sent: Wednesday, July 19, 2000 11:18 AM To: Cisco Group Subject: Cisco 2600 RMON Hung. Hi folks, We have a C2600 that we deleted the Flash off of. Now it boots in the RMON Mode and will not come out of it. we looked at this link below http://www.cisco.com/univercd/cc/td/doc/product/access/acs_mod/cis2600/2600h ig/rom.htm And it is reported as a Boot Chip (Hardware bug) on the 2600. Has anyone else run into this problem and know a way to get rid of the error. The error is listed below. System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1) Copyright (c) 1999 by Cisco Systems, Inc. TAC:Home:SW:IOS:Specials for info C2600 platform with 65536 Kbytes of main memory device does not contain a valid magic number boot: cannot open "flash:" boot: cannot determine first file name on device "flash:" Thanks in advance. Regards. Khalid Ahmed. [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] * The information in this email is confidential and may be legally privileged. It is intended solely for the addressee. Access to this email by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, distribution or any action taken or omitted to be taken in reliance on it, is prohibited and may be unlawful. When addressed to our clients any opinions or advice contained in this email are subject to the terms and conditions expressed in the governing KPMG client engagement letter. * ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Cable router question
I recently got a uBR924 and am attempting to use it with the @Home cable service. Anybody have any experience with this? According to CCO, the router should be somewhat self-configuring. What I see is that the cable interface shows up/down, regardless of whether the cable line is even plugged in. Is this normal? Also, I've attempted to remove the default bridge-group and enable IP routing, but the router doesn't keep these changes after a reboot, though it keeps all other changes I make. I'm just about to call TAC, but I'd rather figure it out for myself with a little nudging from groupstudy. Anyone got any hints for me? - Don * The information in this email is confidential and may be legally privileged. It is intended solely for the addressee. Access to this email by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, distribution or any action taken or omitted to be taken in reliance on it, is prohibited and may be unlawful. When addressed to our clients any opinions or advice contained in this email are subject to the terms and conditions expressed in the governing KPMG client engagement letter. * ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Password brk in 1700 series
There are many documents that relate to this. Just get on www.cisco.com and search for password recovery or your specific model of router. I did, and came up with http://www.cisco.com/univercd/cc/td/doc/product/access/acs_mod/cis1700/hw_in stl/trbshoot.htm. - Don -Original Message- From: Hitesh Pathak (CSD-BBYRO-RTSG) [mailto:[EMAIL PROTECTED]] Sent: Friday, August 04, 2000 5:37 AM To: '[EMAIL PROTECTED]' Subject: Password brk in 1700 series Dear all, Can anyone help me in breaking my enable secret password on 17xx router. Is there any general doc on this available on web. thanks in advance Hitesh ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] * The information in this email is confidential and may be legally privileged. It is intended solely for the addressee. Access to this email by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, distribution or any action taken or omitted to be taken in reliance on it, is prohibited and may be unlawful. When addressed to our clients any opinions or advice contained in this email are subject to the terms and conditions expressed in the governing KPMG client engagement letter. * ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: IS-IS in BSCN
Has anyone ever actually seen IS-IS in production? The closest I've ever gotten to it was having to do some research on it for a writing project. Just curious. - Don -Original Message- From: Chuck Larrieu [mailto:[EMAIL PROTECTED]] Sent: Thursday, August 03, 2000 11:23 AM To: Edward Solomon; [EMAIL PROTECTED] Subject: RE: IS-IS in BSCN Interestingly, the CCIE ISP/Dial track does not talk about IS-IS either, that I can find. Interesting. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Edward Solomon Sent: Thursday, August 03, 2000 9:02 AM To: [EMAIL PROTECTED] Subject:Re: IS-IS in BSCN ""McCallum, Robert"" [EMAIL PROTECTED] wrote in message news:[EMAIL PROTECTED] .uk... I sat the Beta Exam for this and never came across any ISIS questions SNIP Hi, Does anyone know if there are any questions on IS-IS in the new routing exam (BSCN). No, IS-IS is not covered on BSCN. I did not come across any questions on this in the Routing 2.0 examination either. -- Edward Solomon CCNA, CCSI Senior I/T Specialist Networking Solutions IBM Canada Ltd. - Learning Services Tel.: (905) 316-3241 Fax: (905) 316-3101 E-mail: [EMAIL PROTECTED] Internet: http://www.can.ibm.com/services/learning/net_internet.html ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] * The information in this email is confidential and may be legally privileged. It is intended solely for the addressee. Access to this email by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, distribution or any action taken or omitted to be taken in reliance on it, is prohibited and may be unlawful. When addressed to our clients any opinions or advice contained in this email are subject to the terms and conditions expressed in the governing KPMG client engagement letter. * ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Cisco Free Book: IP Telephony
Click on the soccer ball and it'll work. -Original Message- From: Dick Silva [mailto:[EMAIL PROTECTED]] Sent: Monday, July 31, 2000 12:43 PM To: Ed Farmer; [EMAIL PROTECTED] Subject: Re: Cisco Free Book: IP Telephony / It may be free if you can complete the quiz. However when you click on the indicated subjects (there are 3) there is no response, ie, they do not function. Hence you gets no free book. "just an old dog". \ -Original Message- From: Ed Farmer [EMAIL PROTECTED] To: [EMAIL PROTECTED] [EMAIL PROTECTED] Date: Monday, July 31, 2000 11:08 AM Subject: Cisco Free Book: IP Telephony Another Free Book from Cisco. IP Telephony. http://www.cisco.com/offer/govgameplan/V458-100S1 Ed Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] * The information in this email is confidential and may be legally privileged. It is intended solely for the addressee. Access to this email by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, distribution or any action taken or omitted to be taken in reliance on it, is prohibited and may be unlawful. When addressed to our clients any opinions or advice contained in this email are subject to the terms and conditions expressed in the governing KPMG client engagement letter. * ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: CNR
I haven't worked with it enough to recommend it, but I was able to find a lot of info on Cisco's site. Try searching for its full name: Cisco Network Registrar. One of the generic pages I found is http://www.cisco.com/univercd/cc/td/doc/pcat/netregs1.htm - Don -Original Message- From: Muralidhar A. [mailto:[EMAIL PROTECTED]] Sent: Sunday, July 30, 2000 6:57 AM To: cisco freinds Subject: CNR Hi Has anyone worked with CNR 3.5... i need to place a soultion on this.. could anyone give me technical links on this product of Cisco... i searched but all i could get were marketing stuff.. and not much on tech side.. regards, Murali ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] * The information in this email is confidential and may be legally privileged. It is intended solely for the addressee. Access to this email by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, distribution or any action taken or omitted to be taken in reliance on it, is prohibited and may be unlawful. When addressed to our clients any opinions or advice contained in this email are subject to the terms and conditions expressed in the governing KPMG client engagement letter. * ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Significantly off-topic: Whatever happened to diplomacy?
Paul and group, I'm really disappointed in what I see happening with the list of late. I'm only 31, but I can remember when people didn't just fly off the handle at the drop of a hat. Just over this weekend I've seen two flames, and one unfounded accusation; and all of these have been posted for the entire group's enjoyment. A couple of years ago I was co-admin of a message board and one of the standing rules was to refrain from posting personal attacks to the board. Offenders were warned once, then banned for a period. I hate to suggest anything that would require even more maintenance by Paul, but damn it, even preschoolers learn not to bite each other or they take a time-out. And too many people here have apparently forgotten that lesson, making the whole experience less enjoyable than it should be. My delete key works just fine, but I still have to read the post before I decide to delete it. Food for thought. - Don * The information in this email is confidential and may be legally privileged. It is intended solely for the addressee. Access to this email by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, distribution or any action taken or omitted to be taken in reliance on it, is prohibited and may be unlawful. When addressed to our clients any opinions or advice contained in this email are subject to the terms and conditions expressed in the governing KPMG client engagement letter. * ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: TEI SAPI
Your post made me wonder, so I went a-searchin'. The only thing I was able to find on it that might be somewhat authoritative is the following URL: http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/dial_ r/drprt1/drbri.htm Scroll to the bottom of the page and look at the table (or just do a search for "sapi" - it only shows up once). Note that SAPI doesn't enter the equation until layer 3. - Don -Original Message- From: Ole Drews Jensen [mailto:[EMAIL PROTECTED]] Sent: Thursday, July 27, 2000 1:16 PM To: '[EMAIL PROTECTED]' Subject: TEI SAPI I had a question in my study guide about what the combination of TEI SAPI gives you. My answer was 'A unique datalink layer address', but the answer in the book said 'A unique network layer address'. I had the understanding that this was info in the address field of the LAPD protocol (Q.921) which is operating on the ISDN D-channel in the Datalink layer. Who's right, and if I'm wrong - could someone please explain why? I hope this is a typo in the book, because just when you think you know what the it's all about, you get thrown a "No, you're wrong" in the face... Thanks in advance, Ole P.S. Besides the few typo's I've seen, so far this BCRAN book (from McGraw Hill) is excellent Ole Drews Jensen Systems Network Manager CCNA, MCSE, MCP+I RWR Enterprises, Inc. [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] * The information in this email is confidential and may be legally privileged. It is intended solely for the addressee. Access to this email by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, distribution or any action taken or omitted to be taken in reliance on it, is prohibited and may be unlawful. When addressed to our clients any opinions or advice contained in this email are subject to the terms and conditions expressed in the governing KPMG client engagement letter. * ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: CCNA 2.0 details again.....
From what I've heard (I haven't taken 2.0), the main difference is the heightened emphasis on switching in the new exam. - Don -Original Message-From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]Sent: Tuesday, July 25, 2000 3:28 PMTo: GroupStudy Mailing ListSubject: CCNA 2.0 details again. Hi guys, Please don't slander me, but I also wanted to know the main differences between the CCNA 2.0 and 1.0 exam. All of my materials, such as the Todd Lammle book for 640-407, The Sybex e-trainer, and Exam Notes all are for the 1.0 exam. I wanted to know if there was any other material in addition to these references are needed in order to ACE this exam.Not to mention the passing score(822), # of questions(65), and time limit(90min) speculations were true. If someone could give me a brief overview of all this stuff, that'd be great! Thanks in advance for the help, Jay
RE: What Path works?
You have to take the same 4 exams to get your CCNP, so the path you take probably depends upon your strengths and weaknesses. If I were to do it again from scratch, I would probably do the ACRC* first 'cause I'm strong in routing, then the BCRAN, then the BCMSN 'cause I'm weakest in switching (VLANs, STP, etc.), and finally the CIT to wrap it all together. If you're strong in switching, for example, you might want to take the BCMSN first just to get it out of the way. - Don *This exam is gonna be replaced in a few days, but it's the one I took, so it's the one I listed. -Original Message- From: Doug Guth [mailto:[EMAIL PROTECTED]] Sent: Tuesday, July 25, 2000 3:33 PM To: [EMAIL PROTECTED] Subject: What Path works? Looking for some feedback... There seem to be some different paths followed to CCNP. What have you found to be a balance between book smarts and real life prep for CCNP? ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] * The information in this email is confidential and may be legally privileged. It is intended solely for the addressee. Access to this email by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, distribution or any action taken or omitted to be taken in reliance on it, is prohibited and may be unlawful. When addressed to our clients any opinions or advice contained in this email are subject to the terms and conditions expressed in the governing KPMG client engagement letter. * ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: DHCP on Router!!
Hey, Julian! =) I found the following URL that shows what output you *should* see: http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120 t/120t1/easyip2.htm#xtocid2310242 (watch the wrap). How do you have it set up? I'm assuming you've got a router configured as a DHCP server and are watching the console output as a computer configured for DHCP boots while directly plugged into the e0 interface. Have you seen any traffic? Do you see the DHCDISCOVER packet coming from the PC, for example? - Don -Original Message- From: ZAPP, JULIAN F (PB) [mailto:[EMAIL PROTECTED]] Sent: Monday, July 24, 2000 3:00 PM To: swapnil; jeongwoo park; cgs Subject: RE: DHCP on Router!! I have turned on debug DHCP on several routers platforms and different 12.x(x) versions, but have yet to get any response. Has anyone seen the debug output for DHCP. My work around is to use an access list for the DHCP packet. -Original Message- From: swapnil [mailto:[EMAIL PROTECTED]] Sent: Saturday, July 15, 2000 10:31 PM To: jeongwoo park Cc: cgs Subject: Re: DHCP on Router!! IOS 12.0(1)T - Original Message - From: jeongwoo park [EMAIL PROTECTED] To: Groupstudy [EMAIL PROTECTED] Sent: Sunday, July 16, 2000 6:20 AM Subject: DHCP on Router!! Hi all I heard that router had DHCP function. Is that true? if it is, which version is that? Thanks in adv __ Do You Yahoo!? Get Yahoo! Mail - Free email you can access from anywhere! http://mail.yahoo.com/ ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] * The information in this email is confidential and may be legally privileged. It is intended solely for the addressee. Access to this email by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, distribution or any action taken or omitted to be taken in reliance on it, is prohibited and may be unlawful. When addressed to our clients any opinions or advice contained in this email are subject to the terms and conditions expressed in the governing KPMG client engagement letter. * ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Stub Areas
Here are a couple, from our own archives: http://www.groupstudy.com/archives/cisco/22/msg00701.html http://www.groupstudy.com/archives/cisco/22/msg00653.html -Original Message- From: Brandon Carroll [mailto:[EMAIL PROTECTED]] Sent: Monday, July 24, 2000 8:00 AM To: [EMAIL PROTECTED] Subject: Stub Areas Is there a site that breaks down all the areas like, stubby, not so stubby, totally stubby and totally not so stubby? I went over it in BSCN and seem to be having a hard time reviewing it. Thanks. ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] * The information in this email is confidential and may be legally privileged. It is intended solely for the addressee. Access to this email by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, distribution or any action taken or omitted to be taken in reliance on it, is prohibited and may be unlawful. When addressed to our clients any opinions or advice contained in this email are subject to the terms and conditions expressed in the governing KPMG client engagement letter. * ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: CID Books
CCDP++ (I *just* passed!) =) IMNSHO, the ONLY book worth reading is Cisco Internetword Design by Robert Padjen (Sybex). I worked through the Cisco Press book and found it to be basically useless. Don't misunderstand: It's a good text, but it didn't seem to address what was actually on the test. The Sybex book gives you the answers to what is on the exam; by that I mean the information required of the exam is in the book, but there are no NDA violations. Good luck! - Don -Original Message- From: mindiani mindiani [mailto:[EMAIL PROTECTED]] Sent: Friday, July 21, 2000 1:55 PM To: [EMAIL PROTECTED] Subject: CID Books What would be the right Book to prepare for CID. Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] * The information in this email is confidential and may be legally privileged. It is intended solely for the addressee. Access to this email by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, distribution or any action taken or omitted to be taken in reliance on it, is prohibited and may be unlawful. When addressed to our clients any opinions or advice contained in this email are subject to the terms and conditions expressed in the governing KPMG client engagement letter. * ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: School Hook Up
Hooking them up shouldn't prove too difficult. You'll probably want a dual ethernet router (Cisco 1605 or if you're handy with Linux or WinNT just build one). With only a handful of computers like you mentioned, you can stick a hub on the school side of the router, then put your ISDN Terminal Adapter or DSL modem on the other interface. You'll probably also want to consider security issues. - Don -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Sent: Tuesday, July 18, 2000 2:51 PM To: [EMAIL PROTECTED] Subject: School Hook Up Ok all I have a situation at a school I am working with in Mississippi. Not sure if they will have ISDN/DSL access. So here is the problem, how can I hook up 5 or more computers to the Internet with an analog line. If possible what would be a good cheap source of the parts. Thanks Ken A HREF="http://www.geocities.com/warrentonumc/ken.html"Ken's Page/A ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] * The information in this email is confidential and may be legally privileged. It is intended solely for the addressee. Access to this email by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, distribution or any action taken or omitted to be taken in reliance on it, is prohibited and may be unlawful. When addressed to our clients any opinions or advice contained in this email are subject to the terms and conditions expressed in the governing KPMG client engagement letter. * ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Password recovery
Where's the hangup? Can you get to the rommon prompt? If not, I'd suggest a different terminal program: either the upgrade to Hyperterminal, or a completely different animal. There are some issues with the older Hyperterminal sending the break signal properly. If you can get to rommon you shouldn't have a problem, but if you do, lemme know. I used to walk people through password recovery all the time over the phone. - Don -Original Message- From: Jeff Duchin [mailto:[EMAIL PROTECTED]] Sent: Friday, July 14, 2000 11:00 AM To: [EMAIL PROTECTED] Subject: Password recovery Problem. I've got a 2505 and I'm trying to recover the password on it. I've tried all the steps on Cisco's website below and no dice. http://www.cisco.com/warp/public/474/pswdrec_2500.html#proc I'm connecting through the console port using Hyperterminal on an NT box. Any help would be much appreciated. Cheers-n-Beers, Jeff ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] * The information in this email is confidential and may be legally privileged. It is intended solely for the addressee. Access to this email by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, distribution or any action taken or omitted to be taken in reliance on it, is prohibited and may be unlawful. When addressed to our clients any opinions or advice contained in this email are subject to the terms and conditions expressed in the governing KPMG client engagement letter. * ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: cir, bc, be
CIR is the average speed you'll transmit overall. In addition to this, you can burst (Bc) up to, in your example, another 128K (256K total) for a predefined period of time (usually about 1 second). Be designates all those packets above the Bc; these are marked DE and will be discarded if congestion occurs. - Don -Original Message- From: Vic Feferberg [mailto:[EMAIL PROTECTED]] Sent: Friday, July 14, 2000 2:24 AM To: [EMAIL PROTECTED] Subject: cir, bc, be I'm having trouble getting my head around how bc and be relate to cir. For example, if all 3 are set to 128k, is bc included in cir, or is it additional to cir. etc, etc. TIA ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] * The information in this email is confidential and may be legally privileged. It is intended solely for the addressee. Access to this email by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, distribution or any action taken or omitted to be taken in reliance on it, is prohibited and may be unlawful. When addressed to our clients any opinions or advice contained in this email are subject to the terms and conditions expressed in the governing KPMG client engagement letter. * ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Yahoo messages--forming a troubleshooting network
I love the idea too. My personal preference is for ICQ, 'cause I already use it, but this is a great idea. - Don -Original Message- From: Asad Jafari [mailto:[EMAIL PROTECTED]] Sent: Friday, July 14, 2000 4:35 PM To: Fred Flinstone; [EMAIL PROTECTED] Subject: Re: Yahoo messages--forming a troubleshooting network good idea, lets do it!! Asad - Original Message - From: Fred Flinstone [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Friday, July 14, 2000 2:31 PM Subject: Yahoo messages--forming a troubleshooting network Hey ...just a crazy idea but I wondered who all would be up for getting yahoo Instant Messeger login's so when we are all at work when could ask each other Cisco question's concerning day to day operations. I think it would all make us look like guru's to our bosses. :) Thanks Kyle Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] * The information in this email is confidential and may be legally privileged. It is intended solely for the addressee. Access to this email by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, distribution or any action taken or omitted to be taken in reliance on it, is prohibited and may be unlawful. When addressed to our clients any opinions or advice contained in this email are subject to the terms and conditions expressed in the governing KPMG client engagement letter. * ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
