[newbie] pmsuspend2 question
hi, i have an hp pavilion xt118. i am currently running mdk9.2 and am trying to get swsusp to work. when i try it it goes down ok but reboot is slow and comes back with no mouse or keyboard. in my searches i have heard that if you use a seperate swap partition (one that isnt being used for ram) for suspend it works ok. i would like to know if this is true and how to do it. i made a new swap partition and changed the resume=hda() line in the boot section to point to the new partition but i dont know how to make pmsuspend2 write to that swap partition because it only wants to write to the original swap at hda5, not the new one at hda8. thanks in advance, drew Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] NVIDIA driver pops up its ugly head
Hello all, I'm having a ball getting the proprietary nvidia drivers to work on box for a geforce2 DDR card. I've already tried every trick in the book and a lot that aren't, frying the initrd twice in the process and using every kernel I could get my hands on to boot. Tried all rpm's available as well the nvidia install scriptnutting:( I keep on getting the same error in XFree:NVRM: rm_init_adapter failed The way I read my logs the nvidia gets loaded fine by the kernel but gets deactivated by XFree when it can't use the glx module with /dev/nvidia0.:-/ Ah yes, I have commented out the dri line in /etc/security/console.perms and there's no line pointing to it in XF86Config-4 nor to GLcore, so it isn't that. Does this ring any bells or is it a known Mandrake issue I've missed somewhere? TIA, HarM -- Registered Linux User #197998 FSF Associate Member #901 ICQ #146191606 Mandrake HowTo's more: http://twiki.mdklinuxfaq.org Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] Upgrade 9.1--9.2
Title: Upgrade 9.1--9.2 There is a log of my upgrade to 9.2 at http://web.tiscali.it/danslinuxbox/Linux.html Let me know if there are any other lists/people in Mandrake interested in this and I'll forward it to them. Replies to me please as I am not subscribed to the list, or at my personal e-mail found on the website. Thanks, Daniel Hutton
Re: [newbie] Mozilla - that resource hog!
On Thursday 04 Dec 2003 2:16 am, Greg wrote: John Can you tell me where you got all the info listed here John Richard Smith [EMAIL PROTECTED] wrote: top - 13:50:36 up 1 day, 21:26, 3 users, load average: 0.01, 0.06, 0.05 Tasks: 105 total, 2 running, 103 sleeping, 0 stopped, 0 zombie Cpu(s): 16.2% user, 2.0% system, 0.0% nice, 81.8% idle Mem:515336k total, 510792k used, 4544k free, 6568k buffers Swap: 1028120k total,30604k used, 997516k free, 359000k cached PID USER PR NI VIRT RES SHR S %CPU %MEMTIME+ Command 15963 root 15 0 35552 34m 17m S 9.9 6.9 0:14.23 mozilla-bin 1599 root 9 -10 98400 15m 3420 S 7.0 3.1 30:12.89 X 16078 root 11 0 992 992 768 R 0.7 0.2 0:00.57 top 16032 root 9 0 9636 9632 6880 S 0.3 1.9 0:00.68 gnome-terminal That's top Give the command top in a terminal window. -- Richard Urwin Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Shorewall - OK to accept ICMP type 8 from all?
According to google, port 17300 might be used by the W32.Weird (Kuang2) to scan for infected machines. That does not mean your machine is infected (it's a Windows trojan), but that others are searching for an infected machine to activate the trojan. http://www.freelists.org/archives/techies-discuss/06-2003/msg0.html http://us.mcafee.com/virusInfo/default.asp?id=descriptionvirus_k=10213 Just to name two. raffaele [EMAIL PROTECTED] wrote: On Thu, 04 Dec 2003 01:01, Raffaele Belardi wrote: Thanks Raffaele. Just checked the fwlog this morning after changing shorewall to allow pings last night and only being connected to the internet for one hour - and holy shite! MANY more hits than usual on ports 80 and 17300. Strange that so many hits on port 17300 all from different source IPs when I don't even know what that port is used for??? Its not listed in /etc/services and I haven't made any rules for that port myself. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] Ximian Evolution: Inport Addressbook
Hi all... I use Ximian Evolution 1.2.2 [3mdk] that bundled with Mandrake 9.1. I can not import my addressbook from Kmail with vCard 3.0 format or comma separated format. In vCard 3.0, Evolution just can recognize initial and email address, but not all additional information. In comma separated format, it can not do anything. Please expalin me to import may addressbook. -- ()-() Makacih, | Even experienced users ( 'o' ) Budhi mbUdh Astiyadi| read man pages everyday, (,)~(,) Pesanggrahan - Indonesia | so beginner users should (')-(') Registered Linux User #327090 | read them all the time. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Upgrade 9.1--9.2
On Thursday 04 Dec 2003 8:31 am, Hutton Daniel wrote: There is a log of my upgrade to 9.2 at http://web.tiscali.it/danslinuxbox/Linux.html Let me know if there are any other lists/people in Mandrake interested in this and I'll forward it to them. Replies to me please as I am not subscribed to the list, or at my personal e-mail found on the website. Interesting, Daniel. Pity it doesn't go on to installing the upgrades/fixes. Perhaps you didn't know about them, as you are not subscribed to the lists? KDE is vastly different in the new release, as it has been split up into several packages, for cleaner code maintenance - nothing to do with Mandrake, of course. This means that you have to install some related packages, which may not be installed by default. Problems such as disappearing kde menus are cured by the upgrade package. Carry on, and add your results to the page. You might also like to look at our TWiki site (see my sig) for helpful information. Good luck Anne -- Registered Linux User No.293302 Have you visited http://twiki.mdklinuxfaq.org yet? Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] Font spacing in kword in M9.1
How do you reset the spacing between characters in kword ? I need to increase the spacing from the current default setting which virtually merges them. I'm not talking about line spacing. John -- John Richard Smith [EMAIL PROTECTED] Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] scrolling in mozilla/firebird eats up cpu
Jerry Barton wrote: On Wed, 3 Dec 2003 21:11:18 -0500 Todd Slater [EMAIL PROTECTED] wrote: I notice the same behavior in Pan. I wonder if it's a gtk2 or something to do with fonts. Todd I get a bit of a spike when scrolling in sylpheed, too (though not as high as in moz or pan). I use mainly helvetica in mozilla if that makes any difference. John -- John Richard Smith [EMAIL PROTECTED] Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] bind and dhcp
On Thu, 2003-12-04 at 06:19, Fajar Priyanto wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Dear all, I setup a slave name server in the domain. It gets zone transfer from the master. I also use dhcp that dynamically update the zone in the master server. The question is: Should I mention the slave server in clients option in dhcpd.conf? So that clients would know to which name server in case the master is down? Since you are using a private domain name (systek.kom), there is no way the clients find out about the secondary name server unless you explicitly tell them about it. IOW, you should mention it. In the case of public domain name, most of the time you register at the root authority 2 name servers to handle your domain. If the first one goes down the other enter action. -- Adolfo A. Bello B. [EMAIL PROTECTED] Make your posts more effective. Learn how at http://mandrake.vmlinuz.ca/bin/view/Main/MandrakeMailingListEtiquette Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] bind and dhcp
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Dear all, I setup a slave name server in the domain. It gets zone transfer from the master. I also use dhcp that dynamically update the zone in the master server. The question is: Should I mention the slave server in clients option in dhcpd.conf? So that clients would know to which name server in case the master is down? This is my dhcpd.conf: authoritative; ddns-update-style interim; key DHCP_UPDATER { algorithm HMAC-MD5.SIG-ALG.REG.INT; secret BjFnHGfSoUs1RUVnhaqJPg==; }; zone sistek.kom. { primary 192.168.0.250; key DHCP_UPDATER; } zone 0.168.192.in-addr.arpa. { primary 192.168.0.250; key DHCP_UPDATER; } subnet 192.168.0.0 netmask 255.255.255.0 { ddns-updates on; option routers 192.168.0.250; option subnet-mask 255.255.255.0; option domain-name sistek.kom; option domain-name-servers 192.168.0.250; range 192.168.0.1 192.168.0.150; default-lease-time 21600; max-lease-time 43200; host dhcp { hardware ethernet 00:d0:b7:a8:6f:0e; fixed-address 192.168.0.250; } } Many thanks, - -- Fajar http://linux.arinet.org Linux mdk91.sistek.kom 2.4.21-0.13mdk GNU/Linux 17:14:20 up 56 min, 9 users, load average: 0.51, 0.45, 0.39 Quote of the day: Windows 95 is crash compatible with Windows 1.0, 2.x, and 3.x. -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.1 (GNU/Linux) iD8DBQE/zwo7Mai9kCFqACoRAgXgAKCVk2SkzY6YRhT3h5u4BuXht1cvtQCgq34w wDjuSA4B18llSS4dCHoINqo= =jQWy -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] NVIDIA driver pops up its ugly head
On Thursday 04 December 2003 11:03, robin wrote: Have you checked for stale GL simlinks? Sir Robin Well lately, no I haven't but I did a fresh test-install on a spare partition which gave me exactly the same errors. Then I'm already grabbing at straws so I might as well do that so's to be sure. I did make sure the nvidia.o module came from the right kernel as well as manually loading it from it's proper directory to be sure. Thanks, HarM -- Registered Linux User #197998 FSF Associate Member #901 ICQ #146191606 Mandrake HowTo's more: http://twiki.mdklinuxfaq.org Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Mozilla - that resource hog!
Greg wrote: John Can you tell me where you got all the info listed here Thanks Greg It's from a nice little programme called top which should be default installed, but check, in a terminal, # rpm -qa | grep top gnome-desktop-2.2.0.1-2mdk libgtop2-2.0.1-1mdk toppler-0.96-8mdk libgtop2.0_0-2.0.1-1mdk libgnome-desktop-2_2-2.2.0.1-2mdk to see if you have it all installed, if not go to MCC and tell it to install top from your CD's then open another terminal and type top. there are other programmes like gkrellm that do similar things, but for this purpose top does it all nicely. John -- John Richard Smith [EMAIL PROTECTED] Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] Flash and Konquorer
Hi All, How do I make Flash 6 work with Konquorer?It works ok with Mozilla. Drew Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] bins
On Wed, 3 Dec 2003 14:57:28 -0500 Charles A Edwards [EMAIL PROTECTED] wrote: On Mon, 1 Dec 2003 15:44:00 -0500 Lee Wiggers [EMAIL PROTECTED] wrote: I bumbled around after I got my head out of ..and figured it out. Could have been a first. Appreciate your response. Lee if you are interested I just uploaded bins-1.1.24 to my site. It is now split into 2 rpms, bins and bins-gui. Charles -- It's bad enough that life is a rat-race, but why do the rats always have to win?-- Mandrake Linux 9.2 Registered Linux user #182463 Machine: TallBoy #184143 http://www.eslrahc.com -- I don't know, Charles.I was so tickled with me when I got .23 working... Your site is getting pretty spiffy. Lee -- User #223705 Linux Counter, http://counter.li.org Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Flash and Konquorer
On Thursday 04 Dec 2003 12:03 pm, Drew Martin wrote: Hi All, How do I make Flash 6 work with Konquorer?It works ok with Mozilla. Drew In konq settingsPlugins Check the plugins directory includes /usr/lib/mozilla-1.4/plugins (or whereever) Then press the 'Scan' button You will see the plugins detected in the 'Plugins' Tab derek -- -- www.jennings.homelinux.net http://twiki.mdklinuxfaq.org Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] gotmail is not working
On Thursday 04 Dec 2003 1:44 am, Adolfo Bello wrote: Hi there: In the past two days I haven't been able to download my hotmail account mails using gotmail 0.7.9. It's been complaining with: Getting hotmail index page... Processing java check Logging in... Following redirect... Loading main display... gotmail died with message: Could not isolate folder index location Exiting abnormally, cleaning temp files. = It was working nicely before. I just checked the .gotmailrc file and it looks OK. Does any gotmail user have this problem or is it just me? TIA Me too. I assume Hotmail have changed their site and we will need a new version of gotmail. derek -- -- www.jennings.homelinux.net http://twiki.mdklinuxfaq.org Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] gotmail is not working
On Thu, 2003-12-04 at 09:07, Derek Jennings wrote: Me too. I assume Hotmail have changed their site and we will need a new version of gotmail. derek Thank you, Derek. You just avoided me a lot of headaches :-) Saludos, -- Adolfo A. Bello B. [EMAIL PROTECTED] Make your posts more effective. Learn how at http://mandrake.vmlinuz.ca/bin/view/Main/MandrakeMailingListEtiquette Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Flash and Konquorer
On Thursday 04 Dec 2003 1:05 pm, Derek Jennings wrote: On Thursday 04 Dec 2003 12:03 pm, Drew Martin wrote: Hi All, How do I make Flash 6 work with Konquorer?It works ok with Mozilla. Drew In konq settingsPlugins Check the plugins directory includes /usr/lib/mozilla-1.4/plugins (or whereever) Then press the 'Scan' button You will see the plugins detected in the 'Plugins' Tab derek Thanks for that,worked a threat. Drew Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] gotmail is not working
On Thu, Dec 04, 2003 at 01:07:14PM +, Derek Jennings wrote: On Thursday 04 Dec 2003 1:44 am, Adolfo Bello wrote: Hi there: In the past two days I haven't been able to download my hotmail account mails using gotmail 0.7.9. snip Me too. I assume Hotmail have changed their site and we will need a new version of gotmail. hotwayd is still working here if they don't fix gotmail. Todd Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] NVIDIA driver pops up its ugly head
H.J.Bathoorn wrote: Hello all, I'm having a ball getting the proprietary nvidia drivers to work on box for a geforce2 DDR card. I've already tried every trick in the book and a lot that aren't, frying the initrd twice in the process and using every kernel I could get my hands on to boot. Tried all rpm's available as well the nvidia install scriptnutting:( I keep on getting the same error in XFree:NVRM: rm_init_adapter failed The way I read my logs the nvidia gets loaded fine by the kernel but gets deactivated by XFree when it can't use the glx module with /dev/nvidia0.:-/ Ah yes, I have commented out the dri line in /etc/security/console.perms and there's no line pointing to it in XF86Config-4 nor to GLcore, so it isn't that. Does this ring any bells or is it a known Mandrake issue I've missed somewhere? Have you checked for stale GL simlinks? Sir Robin -- Certitude is possible for those who only own one encyclopedia. - Robert Anton Wilson Robin Turner IDMYO Bilkent Univeritesi Ankara 06533 Turkey www.bilkent.edu.tr/~robin Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Kmail hangs - mdk 9.1 - fix or better search option?
--- Ronald J. Hall [EMAIL PROTECTED] wrote: On Wednesday 03 December 2003 08:25 am, Tango Echo wrote: TE Hi all, TE TE I have Mandrake 9.1 installed (w/latest Texstar KDE). TE When I input a search string and hit search Kfind TE hangs. When other windows are dragged in front of it, TE then removed, the Kfind window becomes distorted... TE Is there a fix for this or can you recommend a better TE search tool? TE TE Thanks! TE TE Tango Echo How 'bout just using find, whereis, or locate from a shell? Works awful good here. :-) -- Thanks Ronald, but I am looking for a GUI solution. Yes, I can always su, updatedb, then slocate - and it does work good! However, I am shocked to see only one gui based file search program installed in MDK 9.1, not to mention it doesn't even work... Any more ideas? __ Do you Yahoo!? Free Pop-Up Blocker - Get it now http://companion.yahoo.com/ Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Kmail hangs - finding files
On Thursday 04 Dec 2003 2:24 pm, Derek Jennings wrote: Thanks Ronald, but I am looking for a GUI solution. Yes, I can always su, updatedb, then slocate - and it does work good! However, I am shocked to see only one gui based file search program installed in MDK 9.1, not to mention it doesn't even work... Any more ideas? Yes I have two klocate and kio_locate You will need to compile klocate yourself, but kio_locate is available in contrib. kio_locate allows you to search by typing locate:/string in the url line of konqueror. It uses slocate as its backend which means that it will only find files that have been indexed in the slocate database. The job to do the indexing runs at 4am each morning, so if you switch your computer off at night you will need to install anacron to run the job for you in the morning. I have a write up here http://www.jennings.homelinux.net/modules.php?name=Newsfile=articlesid=7 After you install slocate and kio_locate packages run updatedb as root to initialise the database for the first time. derek If I can add to my own post. I appear to have already made an RPM of klocate I did it for 9.1, but it works on 9.2 as well. It is available in the download area of my site. Also the syntax for using kio_locate is :- locate:/string/ Plus I wanted to emphasise how useful it is for desktop users to install anacron. Without anacron to run jobs which a server would do in the middle of the night your logs and your tmp folder will become huge, and lots of necessary housekeeping will not get done. The downside is that anacron will cause the hard drive to go berserk 15 minutes after you boot your computer. Do not panic it isn't broken. derek -- -- www.jennings.homelinux.net http://twiki.mdklinuxfaq.org Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Mandrake 9.2 won't install
On Thu, 4 Dec 2003 05:57:17 -0800 (PST) Tango Echo [EMAIL PROTECTED] wrote: error in exec of stage2 :-( trying to execute '/usr/bin/runinstall2' from the installation volume, the following fatal error occurred FATAL ERROR IN STAGE1: I/0 error I can't recover from this. You may reboot your system. I tried reburning the CD from the ISO and tried installing on a different computer (both are Compaqs). I'm going to guess the ISO is bad and I need to download it again. But I'd like to make sure here. Any suggestions? I for the ISO from the secsup mirror if that matters... To check the iso's download the md5sum file from the ftp site, I dont remember how to use the file but it checks the iso's to verify proper size and stuff. I had the same problem but i got hold of a bad batch of cheap cd's (dont buy cheap cd's they suck) and i had only three out of 20 that were any good. Regards, Dan Gordon -- Thu Dec 4 09:46:39 EST 2003 09:46:39 up 31 min, 1 user, load average: 0.00, 0.01, 0.04 The only really masterful noise a man makes in a house is the noise of his key, when he is still on the landing, fumbling for the lock. -- Colette Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Kmail hangs - mdk 9.1 - fix or better search option?
On Thursday 04 Dec 2003 2:11 pm, Tango Echo wrote: --- Ronald J. Hall [EMAIL PROTECTED] wrote: On Wednesday 03 December 2003 08:25 am, Tango Echo wrote: TE Hi all, TE TE I have Mandrake 9.1 installed (w/latest Texstar KDE). TE When I input a search string and hit search Kfind TE hangs. When other windows are dragged in front of it, TE then removed, the Kfind window becomes distorted... TE Is there a fix for this or can you recommend a better TE search tool? TE TE Thanks! TE TE Tango Echo How 'bout just using find, whereis, or locate from a shell? Works awful good here. :-) -- Thanks Ronald, but I am looking for a GUI solution. Yes, I can always su, updatedb, then slocate - and it does work good! However, I am shocked to see only one gui based file search program installed in MDK 9.1, not to mention it doesn't even work... Any more ideas? Yes I have two klocate and kio_locate You will need to compile klocate yourself, but kio_locate is available in contrib. kio_locate allows you to search by typing locate:/string in the url line of konqueror. It uses slocate as its backend which means that it will only find files that have been indexed in the slocate database. The job to do the indexing runs at 4am each morning, so if you switch your computer off at night you will need to install anacron to run the job for you in the morning. I have a write up here http://www.jennings.homelinux.net/modules.php?name=Newsfile=articlesid=7 After you install slocate and kio_locate packages run updatedb as root to initialise the database for the first time. derek -- -- www.jennings.homelinux.net http://twiki.mdklinuxfaq.org Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] How to get Wine working?
Hi all, I installed Wine on my system from the cd (mdk 9.1) and I'm wondering how to proceed. In the documentation on Wine HQ all sorts of configuration tools and scripts are mentioned that I just can't find. Can anybody tell me what to do or where I can find a clear tutorial. My goal is when all is running to install TopStyle and give it the ultimate test, so if any of you out there have done this, don't hesitate to tell me how you did it... Regards, Marco Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Kmail hangs - mdk 9.1 - fix or better search option?
On Thursday 04 December 2003 09:11 am, Tango Echo wrote: TE Thanks Ronald, but I am looking for a GUI solution. TE Yes, I can always su, updatedb, then slocate - and it TE does work good! However, I am shocked to see only one TE gui based file search program installed in MDK 9.1, TE not to mention it doesn't even work... Any more ideas? Looks like Johnny on the spot, aka Derek Jennings already answered that! :-) -- /\ DarkLord \/ Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Mandrake 9.2 won't install
On Thursday 04 December 2003 02:50 pm, Dan Gordon wrote: On Thu, 4 Dec 2003 05:57:17 -0800 (PST) Tango Echo [EMAIL PROTECTED] wrote: error in exec of stage2 :-( trying to execute '/usr/bin/runinstall2' from the installation volume, the following fatal error occurred FATAL ERROR IN STAGE1: I/0 error I can't recover from this. You may reboot your system. I tried reburning the CD from the ISO and tried installing on a different computer (both are Compaqs). I'm going to guess the ISO is bad and I need to download it again. But I'd like to make sure here. Any suggestions? I for the ISO from the secsup mirror if that matters... To check the iso's download the md5sum file from the ftp site, I dont remember how to use the file but it checks the iso's to verify proper size and stuff. I had the same problem but i got hold of a bad batch of cheap cd's (dont buy cheap cd's they suck) and i had only three out of 20 that were any good. Regards, Dan Gordon instead of enter, hit f1, and type linux noapic mem=xxxM considering the instructions about shared video memory and reduce the amount of system memory based on how much memory you give to the (onboard/shared memory) video card, so a box with 256 memory installed, and using 16 megs for video would say 'mem=240M' . Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] NVIDIA driver pops up its ugly head
On Thursday 04 December 2003 03:31 am, H.J.Bathoorn wrote: H. Ah yes, I have commented out the dri line in /etc/security/console.perms and H. there's no line pointing to it in XF86Config-4 nor to GLcore, so it isn't H. that. Just a random thought - there are -2- DRI lines in the XF86Config-4 file, did you get them both? -- /\ DarkLord \/ Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Mandrake 9.2 won't install
On Thursday 04 December 2003 09:50 am, Dan Gordon wrote: DG To check the iso's download the md5sum file from the ftp site, I dont DG remember how to use the file but it checks the iso's to verify proper DG size and stuff. I had the same problem but i got hold of a bad batch of DG cheap cd's (dont buy cheap cd's they suck) and i had only three out of DG 20 that were any good. DG DG Regards, DG Dan Gordon DG Just md5sum name of iso image the resulting string of numbers should identically match whats posted on Mandrakes' web site. -- /\ DarkLord \/ Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Kmail hangs - finding files
On Thursday 04 December 2003 09:38 am, Derek Jennings wrote: DJ Plus I wanted to emphasise how useful it is for desktop users to install DJ anacron. Without anacron to run jobs which a server would do in the middle of DJ the night your logs and your tmp folder will become huge, and lots of DJ necessary housekeeping will not get done. The downside is that anacron will DJ cause the hard drive to go berserk 15 minutes after you boot your computer. DJ Do not panic it isn't broken. DJ DJ derek DJ Derek, you can adjust the time that anacron updates the db though, right? Isn't that the part that really thrashes your HD on most (user/desktop) setups? For some reason I'm thinking it can be made to run later rather than sooner... Personally, it never bothered me though... :-) -- /\ DarkLord \/ Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Mandrake 9.2 won't install
Dan Gordon wrote: On Thu, 4 Dec 2003 05:57:17 -0800 (PST) Tango Echo [EMAIL PROTECTED] wrote: error in exec of stage2 :-( trying to execute '/usr/bin/runinstall2' from the installation volume, the following fatal error occurred FATAL ERROR IN STAGE1: I/0 error I can't recover from this. You may reboot your system. I tried reburning the CD from the ISO and tried installing on a different computer (both are Compaqs). I'm going to guess the ISO is bad and I need to download it again. But I'd like to make sure here. Any suggestions? I for the ISO from the secsup mirror if that matters... To check the iso's download the md5sum file from the ftp site, I dont remember how to use the file but it checks the iso's to verify proper size and stuff. I had the same problem but i got hold of a bad batch of cheap cd's (dont buy cheap cd's they suck) and i had only three out of 20 that were any good. Regards, Dan Gordon Before you download the ISO again, do this, test iso cd to directory iso file md5sum isofilename.iso 5a2d86513cdd302bfe546a5463312dd21f32c isofilename.iso The 32-digit hex number is a unique hash based on the data in the file. Then burn to CD in the usual way. Then , test1 burnt cd = You can also check the MD5 hash of the resulting CD-ROM. ls -ls isofilename.iso to find the filesize, in bytes, of the ISO image Divide that by 2048 to find the number of sectors:(xx) Put the CD into a drive but don't mount it. dd if=/dev/(x) bs=2048 count=(xx) | md5sum - where (x) is your device(eg. hdc, or scd0), where (xx) is the number of sectors They should agree.If they do you have good ISO's and CD's John -- John Richard Smith [EMAIL PROTECTED] Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] NVIDIA driver pops up its ugly head
On Thu, 4 Dec 2003 16:55:57 +0100 H.J.Bathoorn [EMAIL PROTECTED] wrote: I'm beginning to think it's either the card itself or the GLX rpm. *Sometimes*, for some weird reason, you have to put the complete path to the GLX library, so where it says: Load glx # 3D layer ...you may need to put: Load /usr/X11R6/lib/modules/extensions/libglx.so -- JoeHill ++ ICQ # 280779813 Registered Linux user #282046 Homepage: www.orderinchaos.org +++ When the going gets weird, the weird turn pro. -- Hunter S. Thompson Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] NVIDIA driver pops up its ugly head
On Thursday 04 Dece9mbr 2003 16:13, Ronald J. Hall wrote: On Thursday 04 December 2003 03:31 am, H.J.Bathoorn wrote: H. Ah yes, I have commented out the dri line in /etc/security/console.perms and H. there's no line pointing to it in XF86Config-4 nor to GLcore, so it isn't H. that. Just a random thought - there are -2- DRI lines in the XF86Config-4 file, did you get them both? Actually there never was a DRI line in mine. XFdra ke picked that up fine. I'm beginning to think it's either the card itself or the GLX rpm. For instance fsv will not run due to missing openGL support. Running it remotely from a box that's got a rivaTnt card that uses the nv driver, that same fsv will run fine. That's a box running 9.2 in an almost mirrored install, kernel et all but obviously not the nvidia drivers as the riva won't work with those. Maybe I'll give mdk9.1 a test drive again on this box and see what happens then. IIRC it worked fine at the time and installed the nvidia drivers out of the box, or was that 9.0?:-/ Thanks, HarM -- Registered Linux User #197998 FSF Associate Member #901 ICQ #146191606 Mandrake HowTo's more: http://twiki.mdklinuxfaq.org Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] gotmail is not working
i get it too, i guess microsoft changed things again, with luck there'll be a fix soon, (oh the arrogance of a mere user, just assume some soul will fix it! :) ) bascule On Thursday 04 Dec 2003 1:44 am, Adolfo Bello wrote: Hi there: In the past two days I haven't been able to download my hotmail account mails using gotmail 0.7.9. It's been complaining with: Getting hotmail index page... Processing java check Logging in... Following redirect... Loading main display... gotmail died with message: Could not isolate folder index location Exiting abnormally, cleaning temp files. = It was working nicely before. I just checked the .gotmailrc file and it looks OK. Does any gotmail user have this problem or is it just me? TIA -- Zaphod grinned two manic grins, sauntered over to the bar and bought most of it. -- Zaphod in paradise. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Kmail hangs - finding files
On Thursday 04 Dec 2003 2:59 pm, Ronald J. Hall wrote: On Thursday 04 December 2003 09:38 am, Derek Jennings wrote: DJ Plus I wanted to emphasise how useful it is for desktop users to install DJ anacron. Without anacron to run jobs which a server would do in the middle of DJ the night your logs and your tmp folder will become huge, and lots of DJ necessary housekeeping will not get done. The downside is that anacron will DJ cause the hard drive to go berserk 15 minutes after you boot your computer. DJ Do not panic it isn't broken. DJ DJ derek DJ Derek, you can adjust the time that anacron updates the db though, right? Isn't that the part that really thrashes your HD on most (user/desktop) setups? For some reason I'm thinking it can be made to run later rather than sooner... Personally, it never bothered me though... :-) man anacrontab tells you how to adjust it. Or you could simply adjust the time of your cron.daily and cron.weekly jobs to a time when the computer is likely to be switched on. It is logrotate and updatedb that really thrashes the HD. I just wanted to get over the point that if the user leaves the system as default then their jobs will never get done if they switch off at night. derek And BTW: Before Anne asks. Yes I have updated the TWiki -- -- www.jennings.homelinux.net http://twiki.mdklinuxfaq.org Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] Mandrake 9.2 won't install
Hi all, I just downloaded Mandrake 9.2 and tried to install. I am brought to the inital splash screen where I hit Enter to continue. Next I see the text fly by but am stopped by this error: error in exec of stage2 :-( trying to execute '/usr/bin/runinstall2' from the installation volume, the following fatal error occurred FATAL ERROR IN STAGE1: I/0 error I can't recover from this. You may reboot your system. I tried reburning the CD from the ISO and tried installing on a different computer (both are Compaqs). I'm going to guess the ISO is bad and I need to download it again. But I'd like to make sure here. Any suggestions? I for the ISO from the secsup mirror if that matters... __ Do you Yahoo!? Free Pop-Up Blocker - Get it now http://companion.yahoo.com/ Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] How to get Wine working?
Hi, for an easy configuration but less optimizated you can use the WineSetupTk configuration tool, i'm not shure if it is on the Mdk 9.1 cd's but if not try to findint on the net. or use the winetools that you can find at www.winehq.com Cdrack. --- Marco Verheul [EMAIL PROTECTED] wrote: Hi all, I installed Wine on my system from the cd (mdk 9.1) and I'm wondering how to proceed. In the documentation on Wine HQ all sorts of configuration tools and scripts are mentioned that I just can't find. Can anybody tell me what to do or where I can find a clear tutorial. My goal is when all is running to install TopStyle and give it the ultimate test, so if any of you out there have done this, don't hesitate to tell me how you did it... Regards, Marco Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com __ Do you Yahoo!? Free Pop-Up Blocker - Get it now http://companion.yahoo.com/ Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Mandrake 9.2 won't install
Happened to me also with the downloaded images, more or less the same error. I powered off and tried again and it worked ok. I had to repeat the installation the day after, this time it worked immediately ok. I don't know what happened. The system is an oldish AMDK6-2/550 with 128Mbyte RAM, for what it's worth. raffaele [EMAIL PROTECTED] wrote: Hi all, I just downloaded Mandrake 9.2 and tried to install. I am brought to the inital splash screen where I hit Enter to continue. Next I see the text fly by but am stopped by this error: error in exec of stage2 :-( trying to execute '/usr/bin/runinstall2' from the installation volume, the following fatal error occurred FATAL ERROR IN STAGE1: I/0 error I can't recover from this. You may reboot your system. I tried reburning the CD from the ISO and tried installing on a different computer (both are Compaqs). I'm going to guess the ISO is bad and I need to download it again. But I'd like to make sure here. Any suggestions? I for the ISO from the secsup mirror if that matters... Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Mozilla-1.5
On Wed, 3 Dec 2003 16:17:17 -0600 John Drouhard [EMAIL PROTECTED] wrote: I just now realized that it's your name backwards, kind of. Charlse. That's clever. lol It has been my user name for quite sometime. When I initially did it, It Was supposed to be my name backwards, except that I spelled it wrong. }-:| Course I'm glad I did now. Charles -- Before destruction a man's heart is haughty, but humility goes before honour. -- Psalms 18:12 - Mandrake Linux 10.0 on PurpleDragon Kernel-2.6.0-0.2mdkenterprise http://www.eslrahc.com - pgp0.pgp Description: PGP signature
Re: [newbie] NVIDIA driver pops up its ugly head
On Thursday 04 December 2003 17:11, JoeHill wrote: On Thu, 4 Dec 2003 16:55:57 +0100 H.J.Bathoorn [EMAIL PROTECTED] wrote: I'm beginning to think it's either the card itself or the GLX rpm. *Sometimes*, for some weird reason, you have to put the complete path to the GLX library, so where it says: Load glx # 3D layer ...you may need to put: Load /usr/X11R6/lib/modules/extensions/libglx.so Yo, that line was there in the first place, I commented it out and added the Load glx line and checked the XFreelogs.libgl.so loads from the same location, that's not it. It's vexing...could be a permission thingy but I wouldn't know any other than dri in /etc/console.perms. Good luck, HarM -- Registered Linux User #197998 FSF Associate Member #901 ICQ #146191606 Mandrake HowTo's more: http://twiki.mdklinuxfaq.org Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Mandrake 9.2 won't install
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Thursday 04 December 2003 8:11 am, Ronald J. Hall wrote: On Thursday 04 December 2003 09:50 am, Dan Gordon wrote: DG To check the iso's download the md5sum file from the ftp site, I dont DG remember how to use the file but it checks the iso's to verify proper DG size and stuff. I had the same problem but i got hold of a bad batch of DG cheap cd's (dont buy cheap cd's they suck) and i had only three out of DG 20 that were any good. DG DG Regards, DG Dan Gordon DG I always use cheap CD-R disks Dan. From the last spindle (100 disks, CDN$38.74 incl GST) all of the 700 MB blanks I have used so far were between 825 and 913 MB available space. Not bad for generic 700 MB High Speed (Max 48X) CD-R Media. BTW; only one coaster but that was a result of PEBCAK. ie.: the loose nut on the keyboard syndrome. Just md5sum name of iso image the resulting string of numbers should identically match whats posted on Mandrakes' web site. When you download the ISOs also download the md5sums.asc file. Then use the command Ron posted but add a -c flag: md5sum -c name of md5sums.asc file to do a check against that official check file. It should check all the download disks. Do this before burning anything unless you don't have enough coasters already. g If you've already done the deed (burnt the disk without checking) put the disk in your regular read drive and use the following command to check. Assumes you have mkcd installed: mkcd --checkmd5 /dev/hdX where X is the drive with the install disk. You'll have to do that for each disk, the first method is faster, checks all disks, and wastes less blanks. (-; HTH Charlie - -- Edmonton,AB,Canada User 244963 at http://counter.li.org Mandrake Linux release 9.2 (FiveStar) for i586 kernel 2.4.22-21mdk 21:57:16 up 13:05, 1 user, load average: 0.01, 0.04, 0.08 This is a good time to punt work. -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.3 (GNU/Linux) iD8DBQE/zsSAZqvqlrLPr5YRAhDAAKCEMW5MBGYbHbJKKUS556HxtCqIDwCfYSbD D2/yZy/6NHJ/r1cst8mL9a4= =4sV3 -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] installing USB mouse on HP laptop
Dear gurus. I have just installed Mandrake 9.2 on a HP Pavilion laptop. In addition to the mouse that comes with the machine, I use an external USB optical mouse. How could I make the system (X Windows?) recognize it and, perhaps, have it co-existing with the regular PS/2 type of mouse? Thanks in advance, Ramon. __ Acabe com aquelas janelinhas que pulam na sua tela. AntiPop-up UOL - É grátis! http://antipopup.uol.com.br/ Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] disabling default user at booting
Dear gurus. I have not succeded in disabling the default user at boot time. Any tip would be very much appreciated. Thanks in advance, Ramon. __ Acabe com aquelas janelinhas que pulam na sua tela. AntiPop-up UOL - É grátis! http://antipopup.uol.com.br/ Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] Testing Procmail Whitelist
Viagra! -- JoeHill ++ ICQ # 280779813 Registered Linux user #282046 Homepage: www.orderinchaos.org +++ Reality is what you can get away with. -- Robert Anton Wilson Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Testing Procmail Whitelist
On Thu, 4 Dec 2003 20:30:26 -0500 JoeHill [EMAIL PROTECTED] wrote: Viagra! It works! Woot! I's learnin', sorry to bombard like this... -- JoeHill ++ ICQ # 280779813 Registered Linux user #282046 Homepage: www.orderinchaos.org +++ Where the state begins, individual liberty ceases, and vice versa. -- Bakunin Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Testing Procmail Whitelist
It was filtered, didn't it? You have to change: * [EMAIL PROTECTED] to * [EMAIL PROTECTED] Saludos, Adolfo Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Testing Procmail Whitelist
On Thu, 4 Dec 2003 20:30:26 -0500 JoeHill [EMAIL PROTECTED] wrote: Viagra! Penis -- Collar points don't match, and you've trimmed all the seams -- Murphy's Laws of Sewing n°13 - Mandrake Linux 10.0 on PurpleDragon Kernel-2.6.0-0.2mdkenterprise http://www.eslrahc.com - pgp0.pgp Description: PGP signature
Re: [newbie] Testing Procmail Whitelist
On Thu, 2003-12-04 at 21:43, Charles A Edwards wrote: On Thu, 4 Dec 2003 20:30:26 -0500 JoeHill [EMAIL PROTECTED] wrote: Viagra! Penis spamassassin Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Testing Procmail Whitelist
On Thu, 04 Dec 2003 21:47:46 -0400 Adolfo Bello [EMAIL PROTECTED] wrote: spamassassin not big enough -- Collar points don't match, and you've trimmed all the seams -- Murphy's Laws of Sewing n°13 - Mandrake Linux 10.0 on PurpleDragon Kernel-2.6.0-0.2mdkenterprise http://www.eslrahc.com - pgp0.pgp Description: PGP signature
Re: [newbie] NVIDIA driver pops up its ugly head
On Thursday 04 December 2003 22:23, Ronald J. Hall wrote: Did you do the: chmod 0666 /dev/nvidia* chown root /dev/nvidia* thingy? Hehehehh, are you getting back at me for criticizing yer reply settings?;D No, I didn't. Anyway, this is what I get: chmod 0666 /dev/nvidia* chmod: failed to get attributes of `/dev/nvidia*': No such file or directory lsmod shows no nvidia module loaded. Hey, that's funny I don't remember uninstalling the nvidia kernel. urpmq doesn't show it either..so run nvidia's installer again, I'm definitely getting old. Ok, it installs and removes some stale stuff (at least it gives that impression).lsmod shows nvidia, startx doesn't play ball:( Can't load the modulesheesh! So lets give it a reboot just be sure...a shocking mess: no more user/lib/module.deps (or something along that line) and an unworkable system:( Luckily I can boot from another partition that has / mirrored so no real damage except me losing an hour or 2. What a mess:( Good luck, HarM -- -- Registered Linux User #197998 FSF Associate Member #901 ICQ #146191606 Mandrake HowTo's more: http://twiki.mdklinuxfaq.org Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Testing Procmail Whitelist
On Thu, Dec 04, 2003 at 08:43:18PM -0500, Charles A Edwards wrote: On Thu, 4 Dec 2003 20:30:26 -0500 JoeHill [EMAIL PROTECTED] wrote: Viagra! Penis DON'T LOSE ANY MORE MONEY ON YOUR EXISTING HOME LOAN! Todd Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Upgrade 9.1--9.2
I tried the upgrade and it hosed kde and the menu system. I then re-did it as a install so I did not play around to much. Roly On Thursday 04 December 2003 12:31 am, Hutton Daniel wrote: There is a log of my upgrade to 9.2 at http://web.tiscali.it/danslinuxbox/Linux.html Let me know if there are any other lists/people in Mandrake interested in this and I'll forward it to them. Replies to me please as I am not subscribed to the list, or at my personal e-mail found on the website. Thanks, Daniel Hutton -- MicroSoft - The company that made the internet unsafe! Linux Counter #241069 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] test
messages dont seem to be getting through. please ignore -- Thu Dec 4 17:39:37 CST 2003 -- Registered Linux User # 315649 Registered Machine # 201001 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] Bootdisk editing
I have 9.0 x86_64 version that suffers from the same bug that 9.0 32bit did. The boot images are missing floppy.o... Mandrake does not have a fix out for it yet. I would like to add that into the .mar file inside network.rdz from the network.img floppy. Please step me through on how to properly unpack/repack the .rdz, and what/where are the tools for editing the .mar file inside the ramdisk image. I figured out how to mount and unmount ramdisk images. :-D Thanks! Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] menu/rpm bug update
There was another update on the menu bug. If interested, i added the 2nd advisory link: http://mandrake.vmlinuz.ca/bin/view/Main/FiveStarNews eric -- Mandrake HowTo's More: http://twiki.mdklinuxfaq.org Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Time display errors
Somebody scribbled about [newbie] Time display errors Coming from a Windows intensive background I mainly use X and I have noticed that since the upgrade, my system time seems to increment itself by 2 hours each time I reboot the machine, if I don't physically change it each time. Now that's odd. So would you for instance reboot today, then it would be 2 hours ahead, reboot the next day, find it 4 hours ahead - or does it just stay ahead of the regular time zone? I'll hazard a guess you're running KDE and you're seeing the same behavior of KDE's clock display I am, but first verify your machine is showing correct time by typing 'date' in a konsole. That will display what time Linux thinks it is and that is derived from the BIOS time (which should be set to UTC, unless you're on a dual boot system) and a time zone offset settable by Mandrake Control Center or by editing the timezone files directly. I have set the local time zone in the clock GUI to be Africa/Johannesburg and hence my time zone to SAST but my time still increments. I thought it might be that my hardware clock was said to There may be two sets of timezone information being displayed - as others have suggested. My KDE clock right now is +7 hours fast of PST, and I've seen variations of that - usually it shows up as EST. I don't reboot often enough, but it could advance the zones as you describe - I haven't been able to notice. If I open Mandrake Control Center, choose System/date and time, my clock in MCC shows the correct time zone. I reset the KDE clock with right mouse click and Show date and time - and select America/Los Angeles, and it thinks I'm on the East Coast somewhere (it's 11:44, presumably PM, according to the KDE clock, but 8:44 pm now in California). Too bad I don't run this thing at work, I could convince my boss it's time to go home :). As far as I can tell, KDE's information for time zones differs from what Mandrake shows -- in other words, America/Los Angeles from KDE's splash screen is different from America/Los Angeles in MCC. But that doesn't really make sense. What I have noticed is that when I start KDE, the time zone will be correct for some period of time -- and then something - running some application, or just waiting around -- invariably, the clock gets bumped. And it's only affecting the KDE clock. Anything else (even KDE applications that display time in a status message, for instance, Kmail) shows the correct time zone. Also take note that KDE's clock can show a time zone independently of what the system shows. UTC=false ARC=false ZONE=America/New_York Where the America/New_York came from is anybody's guess. I tried AFAIK it's the default time zone setting. editing the file and putting Africa/Johannesburg as the Zone but I did not have any luck with the line as below: OK but when you edit the file I think you need to rerun init. Many configuration files are like that - the changes aren't immediately acted upon. Assuming you reran init (e.g., by rebooting) does the Unix (Linux) time zone show as correct? -- David E. Fox Thanks for letting me [EMAIL PROTECTED]change magnetic patterns [EMAIL PROTECTED] on your hard disk. --- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] How to get Wine working?
Hi Marco, The Wine on the 9.1 CDs is very old (new releases come out monthly). Wines compiled for Mandrake can be found at http://sourceforge.net/project/showfiles.php?group_id=6241 I'm not sure about the status of the November wine. There have been a number of complaints on the wine users mailing list about the Mandrake binary. However, I installed the October Mandrake binary successfully, so I know that one will install properly on a 9.1 system. I agree with cdrack's advice about using Winesetuptk to configure it. There is a new Winesetuptk at the site I listed above. One of its benefits is that it takes advantage of all the new stuff in the latest Wine releases. I installed it and thought it did a great job of installing all my media for Wine's use. Since Wine is alpha software, there is no guarantee that it will run your application. Winehq maintains a database of applications that have been tried with Wine (both successfully and unsuccessfully). You might look there to see if anyone has tried to use TopStyle with Wine. http://appdb.winehq.com Also, it is important to remove your current installation of Wine before installing another one. You can easily do this through the Mandrake Control Center. Good luck, deedee cdrack [EMAIL PROTECTED] wrote: Hi, for an easy configuration but less optimizated you can use the WineSetupTk configuration tool, i'm not shure if it is on the Mdk 9.1 cd's but if not try to findint on the net. or use the winetools that you can find at www.winehq.com Cdrack. --- Marco Verheul [EMAIL PROTECTED] wrote: Hi all, I installed Wine on my system from the cd (mdk 9.1) and I'm wondering how to proceed. In the documentation on Wine HQ all sorts of configuration tools and scripts are mentioned that I just can't find. Can anybody tell me what to do or where I can find a clear tutorial. My goal is when all is running to install TopStyle and give it the ultimate test, so if any of you out there have done this, don't hesitate to tell me how you did it... Regards, Marco -- Registered Linux User #327485 Visit WordStar GNU/Linux http://www.wordstar2.com Also, see the WordStar Users Group http://www.wordstar2.com/cbabbage/wordstar __ McAfee VirusScan Online from the Netscape Network. Comprehensive protection for your entire computer. Get your free trial today! http://channels.netscape.com/ns/computing/mcafee/index.jsp?promo=393397 Get AOL Instant Messenger 5.1 free of charge. Download Now! http://aim.aol.com/aimnew/Aim/register.adp?promo=380455 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com