Re: [newbie-it] modem interno
Alle 23:19, giovedì 9 maggio 2002, hai scritto: - C'e' una altissima probabilita' tendente al 99% che sia un winmodem non supportato; sarebbe comunque interessante sapere che chipset monta; - cerca su http://www.idir.net/~gromitkc/winmodem.html, www.linmodems.org e con google se c'e' qualche riferimento in giro per il tuo modem (non farti illusioni, AFAIK non c'e' molta speranza ..); - l'irq 17 non esiste :) presumo che sia un refuso. hmmm, non saprei. Ho lo stesso problema e con un modem Lucent (non AMR) che era ampiamente suportato e funzionante sulla rh 7.2 (portatile Acer) previa installazione del driver. Ho scaricato il relativo driver per mdk8.2, l'ho installato ma riscontro gli stessi problemi. Settandolo (come da default) come /dev/modem mi dice che non riesce a rilevare il modem, se cambio in ttys2 dice inizializzazione modem e rimane fermo li e non si connette. Ciao Sandro -- Dr. Sandro Porrazzini - A.I.P. n. 2075 - [EMAIL PROTECTED] Mandrake Linux 8.1 on Pentium III 688 Mhz Linux Machine # 103048 Linux User # 203143
Re: [newbie-it] Installazione mdk 8.2
- Original Message - From: freefred [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Friday, May 10, 2002 1:54 AM Subject: Re: [newbie-it] Installazione mdk 8.2 ormai dovresti credo aver risolto. Sì, l'ho installato cancellando la mdk 8.1 -perdendo tutti i dati per non aver fatto backup - ma ho preferito avere un amico esperto al mio fianco... :-) La prima installazione si era bloccata dopo aver chiesto il 3 cd. Poi una volta rifatta e formattando le partizioni preesistenti è andato tutto a buon fine. anche lilo mi permette sempre l'avvio a win Ho solo dato un'occhiata veloce ma - sigh - il problema dello scanner collegato allo hub non si è risolto. Continua a non vedere sto cazz' di hub. Mah!! solo una cosa quindi: e' normale il tempo dell'aggiornamento. anzi, a seconda del pc, puo' essere anche piu' lungo. L'aggiornamento e' una cosa che richiede molto tempo (immagino prima controlli tutti i pacchetti che hai e le dipendenze ecc.) Me ne sono accorto. ;-) Ciao ku68
Fwd: Re: [newbie-it] Trasferire file
Scusate se inoltro nuovamente il messaggio ma viste le numerose e-mail che sono arrivate successivamente pensa sia il caso di rimandarla. Scusate se aggiungo anche un altra cosa: Se una cosa si può fare con Linux perchè consigliare di farla con un programmino per Win--ws? Scusate ma questa è una mailing-list di Linux. -- Messaggio inoltrato -- Subject: Re: [newbie-it] Trasferire file Date: Thu, 9 May 2002 11:18:12 +0200 From: Germano [EMAIL PROTECTED] To: [EMAIL PROTECTED] Dipende da che errore ti dà. Può darsi che la directory non sia montata (controlla leggendo il contenuto di /etc/mtab: se è presente vuol dire che è montata). Può darsi che se provi come utente normale non te lo faccia fare mentre da root sì: vuol dire che in /etc/fstab nella riga corrispondente non c'è l'opzione 'user' (in realtà quella opzione decide chi è che può montare quella directory). Oppure, più semplicemente, non hai i permessi in scrittura per quella directory. Ciao, Ge Il 08:29, giovedì 09 Maggio 2002, ku68 hai scritto: Ciao, ho questo problema. Vorrei trasferire alcuni file scaricati via mail da linux a win. Ho provato a trasferirli nella dir /mnt/win_c/windows/desktop/nome del file ma mi segnala che è impossibile. Eppure mi è stato detto che si può anche senza montare samba o altro. Dov'è che sbaglio? Grazie in anticipo dell'eventuale risposta ku68 ---
Fwd: Re: [newbie-it] Mozilla, netscape, konqueror .....e java
Per errore questa risposta era andata all'indirizzo privato di Max. La riposto qui in ML... Daniele -- Messaggio inoltrato -- Subject: Re: [newbie-it] Mozilla, netscape, konqueror .e java Date: Fri, 10 May 2002 10:39:50 +0200 From: Daniele Micci [EMAIL PROTECTED] Alle 09:53, venerdì 10 maggio 2002, hai scritto: Salve, prima di tutto un grazie a tutti per l'interessamento. Il link che non riesco a percorrere è quello delle gare in corso: mi ritorna sempre all' home page, con win$ invece vengono visualizzati altri due link sulla destra e posso entrare nelle sezioni gare di appalto. Non vengono generati messaggi di errore e java (ibm jre 2.13) è installato come pure l' ssl layer (jsse1.0.2). Grazie ancora max Ciao, per vedere il problema con i miei occhi, sono andato anche io sul sito dell'ANAS. Credo che tutto dipenda dall'errore che compare nella parte bassa dello schermo: Microsoft OLE DB Provider for ODBC Driverserror '80040e21' Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done. /_gghi_report/gghi_Log.inc, line 41 Confermo che cliccare sui link produce solo un refresh della home page. Temo a questo punto che ci sia del codice ASP nella home page che viene eseguito solo in presenza di alcuni browser... quali saranno mai? :-| Direi che l'idea di scrivere in blocco (cioè tutti noi) un'email ai gestori del sito potrebbe essere una via. Almeno gli si rompe un po' le scatole! Daniele ---
[newbie-it] CD Allegati a LinuxC difettosi
Salve a tutti, invio questa mail, perche' mi e' successa una cosa strana. I CD della mdk8.2 allegati a Linuxc mi davano dei problemi durante l'installazione, il lettore continuava a rippare senza procedere, non completava il secon stage, etc. Ho saputo in facolta' di non essere l'unico con questo problema, ma visto che sono riuscito a risolverlo, posto il procedimento da me seguito, magari puo' essere utile a qualcuno. Quello che ho fatto e' stato creare delle copie dei CD tramite NERO, il quale permette di specificare il numero di tentativi di lettura da eseguire prima di dichiarare un errore, e inoltre consente un certo recovery dei settori danneggiai, anche quando questi siano su dischi masterizzati in modo 1. Ho usato nero perche' Clone vedeva i cd danneggiati, e non riusciava a correggerli. Se la copia riesce in modo corretto basta rimasterizzare i cd e i problemi sono risolti. Spero di non essere troppo OT e di non aver scassato le b---e a nessuno. Ciao Nicola. P.s. I problemi nelle ricompilazione dei moduli che avevo trovato nella 8.1 qui non li ho riscontrati (E vai!!) - Salve, il messaggio che hai ricevuto è stato inviato per mezzo del sistema di web mail interfree. Se anche tu vuoi una casella di posta free visita il sito http://club.interfree.it Ti aspettiamo! -
[newbie-it] CD Allegati a LinuxC difettosi
Salve a tutti, invio questa mail, perche' mi e' successa una cosa strana. I CD della mdk8.2 allegati a Linuxc mi davano dei problemi durante l'installazione, il lettore continuava a rippare senza procedere, non completava il secon stage, etc. Ho saputo in facolta' di non essere l'unico con questo problema, ma visto che sono riuscito a risolverlo, posto il procedimento da me seguito, magari puo' essere utile a qualcuno. Quello che ho fatto e' stato creare delle copie dei CD tramite NERO, il quale permette di specificare il numero di tentativi di lettura da eseguire prima di dichiarare un errore, e inoltre consente un certo recovery dei settori danneggiai, anche quando questi siano su dischi masterizzati in modo 1. Ho usato nero perche' Clone vedeva i cd danneggiati, e non riusciava a correggerli. Se la copia riesce in modo corretto basta rimasterizzare i cd e i problemi sono risolti. Spero di non essere troppo OT e di non aver scassato le b---e a nessuno. Ciao Nicola. P.s. I problemi nelle ricompilazione dei moduli che avevo trovato nella 8.1 qui non li ho riscontrati (E vai!!) - Salve, il messaggio che hai ricevuto è stato inviato per mezzo del sistema di web mail interfree. Se anche tu vuoi una casella di posta free visita il sito http://club.interfree.it Ti aspettiamo! -
[newbie-it] CD Allegati a LinuxC difettosi
Salve a tutti, invio questa mail, perche' mi e' successa una cosa strana. I CD della mdk8.2 allegati a Linuxc mi davano dei problemi durante l'installazione, il lettore continuava a rippare senza procedere, non completava il secon stage, etc. Ho saputo in facolta' di non essere l'unico con questo problema, ma visto che sono riuscito a risolverlo, posto il procedimento da me seguito, magari puo' essere utile a qualcuno. Quello che ho fatto e' stato creare delle copie dei CD tramite NERO, il quale permette di specificare il numero di tentativi di lettura da eseguire prima di dichiarare un errore, e inoltre consente un certo recovery dei settori danneggiai, anche quando questi siano su dischi masterizzati in modo 1. Ho usato nero perche' Clone vedeva i cd danneggiati, e non riusciava a correggerli. Se la copia riesce in modo corretto basta rimasterizzare i cd e i problemi sono risolti. Spero di non essere troppo OT e di non aver scassato le b---e a nessuno. Ciao Nicola. P.s. I problemi nelle ricompilazione dei moduli che avevo trovato nella 8.1 qui non li ho riscontrati (E vai!!) - Salve, il messaggio che hai ricevuto è stato inviato per mezzo del sistema di web mail interfree. Se anche tu vuoi una casella di posta free visita il sito http://club.interfree.it Ti aspettiamo! -
[newbie-it] CD Allegati a LinuxC difettosi
Salve a tutti, invio questa mail, perche' mi e' successa una cosa strana. I CD della mdk8.2 allegati a Linuxc mi davano dei problemi durante l'installazione, il lettore continuava a rippare senza procedere, non completava il secon stage, etc. Ho saputo in facolta' di non essere l'unico con questo problema, ma visto che sono riuscito a risolverlo, posto il procedimento da me seguito, magari puo' essere utile a qualcuno. Quello che ho fatto e' stato creare delle copie dei CD tramite NERO, il quale permette di specificare il numero di tentativi di lettura da eseguire prima di dichiarare un errore, e inoltre consente un certo recovery dei settori danneggiai, anche quando questi siano su dischi masterizzati in modo 1. Ho usato nero perche' Clone vedeva i cd danneggiati, e non riusciava a correggerli. Se la copia riesce in modo corretto basta rimasterizzare i cd e i problemi sono risolti. Spero di non essere troppo OT e di non aver scassato le b---e a nessuno. Ciao Nicola. P.s. I problemi nelle ricompilazione dei moduli che avevo trovato nella 8.1 qui non li ho riscontrati (E vai!!) - Salve, il messaggio che hai ricevuto è stato inviato per mezzo del sistema di web mail interfree. Se anche tu vuoi una casella di posta free visita il sito http://club.interfree.it Ti aspettiamo! -
[newbie-it] CD Allegati a LinuxC difettosi
Salve a tutti, invio questa mail, perche' mi e' successa una cosa strana. I CD della mdk8.2 allegati a Linuxc mi davano dei problemi durante l'installazione, il lettore continuava a rippare senza procedere, non completava il secon stage, etc. Ho saputo in facolta' di non essere l'unico con questo problema, ma visto che sono riuscito a risolverlo, posto il procedimento da me seguito, magari puo' essere utile a qualcuno. Quello che ho fatto e' stato creare delle copie dei CD tramite NERO, il quale permette di specificare il numero di tentativi di lettura da eseguire prima di dichiarare un errore, e inoltre consente un certo recovery dei settori danneggiai, anche quando questi siano su dischi masterizzati in modo 1. Ho usato nero perche' Clone vedeva i cd danneggiati, e non riusciava a correggerli. Se la copia riesce in modo corretto basta rimasterizzare i cd e i problemi sono risolti. Spero di non essere troppo OT e di non aver scassato le b---e a nessuno. Ciao Nicola. P.s. I problemi nelle ricompilazione dei moduli che avevo trovato nella 8.1 qui non li ho riscontrati (E vai!!) - Salve, il messaggio che hai ricevuto è stato inviato per mezzo del sistema di web mail interfree. Se anche tu vuoi una casella di posta free visita il sito http://club.interfree.it Ti aspettiamo! -
[newbie-it] CD Allegati a LinuxC difettosi
Salve a tutti, invio questa mail, perche' mi e' successa una cosa strana. I CD della mdk8.2 allegati a Linuxc mi davano dei problemi durante l'installazione, il lettore continuava a rippare senza procedere, non completava il secon stage, etc. Ho saputo in facolta' di non essere l'unico con questo problema, ma visto che sono riuscito a risolverlo, posto il procedimento da me seguito, magari puo' essere utile a qualcuno. Quello che ho fatto e' stato creare delle copie dei CD tramite NERO, il quale permette di specificare il numero di tentativi di lettura da eseguire prima di dichiarare un errore, e inoltre consente un certo recovery dei settori danneggiai, anche quando questi siano su dischi masterizzati in modo 1. Ho usato nero perche' Clone vedeva i cd danneggiati, e non riusciava a correggerli. Se la copia riesce in modo corretto basta rimasterizzare i cd e i problemi sono risolti. Spero di non essere troppo OT e di non aver scassato le b---e a nessuno. Ciao Nicola. P.s. I problemi nelle ricompilazione dei moduli che avevo trovato nella 8.1 qui non li ho riscontrati (E vai!!) - Salve, il messaggio che hai ricevuto è stato inviato per mezzo del sistema di web mail interfree. Se anche tu vuoi una casella di posta free visita il sito http://club.interfree.it Ti aspettiamo! -
[newbie-it] CD Allegati a LinuxC difettosi
Salve a tutti, invio questa mail, perche' mi e' successa una cosa strana. I CD della mdk8.2 allegati a Linuxc mi davano dei problemi durante l'installazione, il lettore continuava a rippare senza procedere, non completava il secon stage, etc. Ho saputo in facolta' di non essere l'unico con questo problema, ma visto che sono riuscito a risolverlo, posto il procedimento da me seguito, magari puo' essere utile a qualcuno. Quello che ho fatto e' stato creare delle copie dei CD tramite NERO, il quale permette di specificare il numero di tentativi di lettura da eseguire prima di dichiarare un errore, e inoltre consente un certo recovery dei settori danneggiai, anche quando questi siano su dischi masterizzati in modo 1. Ho usato nero perche' Clone vedeva i cd danneggiati, e non riusciava a correggerli. Se la copia riesce in modo corretto basta rimasterizzare i cd e i problemi sono risolti. Spero di non essere troppo OT e di non aver scassato le b---e a nessuno. Ciao Nicola. P.s. I problemi nelle ricompilazione dei moduli che avevo trovato nella 8.1 qui non li ho riscontrati (E vai!!) - Salve, il messaggio che hai ricevuto è stato inviato per mezzo del sistema di web mail interfree. Se anche tu vuoi una casella di posta free visita il sito http://club.interfree.it Ti aspettiamo! -
[newbie-it] CD Allegati a LinuxC difettosi
Salve a tutti, invio questa mail, perche' mi e' successa una cosa strana. I CD della mdk8.2 allegati a Linuxc mi davano dei problemi durante l'installazione, il lettore continuava a rippare senza procedere, non completava il secon stage, etc. Ho saputo in facolta' di non essere l'unico con questo problema, ma visto che sono riuscito a risolverlo, posto il procedimento da me seguito, magari puo' essere utile a qualcuno. Quello che ho fatto e' stato creare delle copie dei CD tramite NERO, il quale permette di specificare il numero di tentativi di lettura da eseguire prima di dichiarare un errore, e inoltre consente un certo recovery dei settori danneggiai, anche quando questi siano su dischi masterizzati in modo 1. Ho usato nero perche' Clone vedeva i cd danneggiati, e non riusciava a correggerli. Se la copia riesce in modo corretto basta rimasterizzare i cd e i problemi sono risolti. Spero di non essere troppo OT e di non aver scassato le b---e a nessuno. Ciao Nicola. P.s. I problemi nelle ricompilazione dei moduli che avevo trovato nella 8.1 qui non li ho riscontrati (E vai!!) - Salve, il messaggio che hai ricevuto è stato inviato per mezzo del sistema di web mail interfree. Se anche tu vuoi una casella di posta free visita il sito http://club.interfree.it Ti aspettiamo! -
[newbie-it] CD Allegati a LinuxC difettosi
Salve a tutti, invio questa mail, perche' mi e' successa una cosa strana. I CD della mdk8.2 allegati a Linuxc mi davano dei problemi durante l'installazione, il lettore continuava a rippare senza procedere, non completava il secon stage, etc. Ho saputo in facolta' di non essere l'unico con questo problema, ma visto che sono riuscito a risolverlo, posto il procedimento da me seguito, magari puo' essere utile a qualcuno. Quello che ho fatto e' stato creare delle copie dei CD tramite NERO, il quale permette di specificare il numero di tentativi di lettura da eseguire prima di dichiarare un errore, e inoltre consente un certo recovery dei settori danneggiai, anche quando questi siano su dischi masterizzati in modo 1. Ho usato nero perche' Clone vedeva i cd danneggiati, e non riusciava a correggerli. Se la copia riesce in modo corretto basta rimasterizzare i cd e i problemi sono risolti. Spero di non essere troppo OT e di non aver scassato le b---e a nessuno. Ciao Nicola. P.s. I problemi nelle ricompilazione dei moduli che avevo trovato nella 8.1 qui non li ho riscontrati (E vai!!) - Salve, il messaggio che hai ricevuto è stato inviato per mezzo del sistema di web mail interfree. Se anche tu vuoi una casella di posta free visita il sito http://club.interfree.it Ti aspettiamo! -
[newbie-it] CD Allegati a LinuxC difettosi
Salve a tutti, invio questa mail, perche' mi e' successa una cosa strana. I CD della mdk8.2 allegati a Linuxc mi davano dei problemi durante l'installazione, il lettore continuava a rippare senza procedere, non completava il secon stage, etc. Ho saputo in facolta' di non essere l'unico con questo problema, ma visto che sono riuscito a risolverlo, posto il procedimento da me seguito, magari puo' essere utile a qualcuno. Quello che ho fatto e' stato creare delle copie dei CD tramite NERO, il quale permette di specificare il numero di tentativi di lettura da eseguire prima di dichiarare un errore, e inoltre consente un certo recovery dei settori danneggiai, anche quando questi siano su dischi masterizzati in modo 1. Ho usato nero perche' Clone vedeva i cd danneggiati, e non riusciava a correggerli. Se la copia riesce in modo corretto basta rimasterizzare i cd e i problemi sono risolti. Spero di non essere troppo OT e di non aver scassato le b---e a nessuno. Ciao Nicola. P.s. I problemi nelle ricompilazione dei moduli che avevo trovato nella 8.1 qui non li ho riscontrati (E vai!!) - Salve, il messaggio che hai ricevuto è stato inviato per mezzo del sistema di web mail interfree. Se anche tu vuoi una casella di posta free visita il sito http://club.interfree.it Ti aspettiamo! -
[newbie-it] CD Allegati a LinuxC difettosi
Salve a tutti, invio questa mail, perche' mi e' successa una cosa strana. I CD della mdk8.2 allegati a Linuxc mi davano dei problemi durante l'installazione, il lettore continuava a rippare senza procedere, non completava il secon stage, etc. Ho saputo in facolta' di non essere l'unico con questo problema, ma visto che sono riuscito a risolverlo, posto il procedimento da me seguito, magari puo' essere utile a qualcuno. Quello che ho fatto e' stato creare delle copie dei CD tramite NERO, il quale permette di specificare il numero di tentativi di lettura da eseguire prima di dichiarare un errore, e inoltre consente un certo recovery dei settori danneggiai, anche quando questi siano su dischi masterizzati in modo 1. Ho usato nero perche' Clone vedeva i cd danneggiati, e non riusciava a correggerli. Se la copia riesce in modo corretto basta rimasterizzare i cd e i problemi sono risolti. Spero di non essere troppo OT e di non aver scassato le b---e a nessuno. Ciao Nicola. P.s. I problemi nelle ricompilazione dei moduli che avevo trovato nella 8.1 qui non li ho riscontrati (E vai!!) - Salve, il messaggio che hai ricevuto è stato inviato per mezzo del sistema di web mail interfree. Se anche tu vuoi una casella di posta free visita il sito http://club.interfree.it Ti aspettiamo! -
[newbie-it] CD Allegati a LinuxC difettosi
Salve a tutti, invio questa mail, perche' mi e' successa una cosa strana. I CD della mdk8.2 allegati a Linuxc mi davano dei problemi durante l'installazione, il lettore continuava a rippare senza procedere, non completava il secon stage, etc. Ho saputo in facolta' di non essere l'unico con questo problema, ma visto che sono riuscito a risolverlo, posto il procedimento da me seguito, magari puo' essere utile a qualcuno. Quello che ho fatto e' stato creare delle copie dei CD tramite NERO, il quale permette di specificare il numero di tentativi di lettura da eseguire prima di dichiarare un errore, e inoltre consente un certo recovery dei settori danneggiai, anche quando questi siano su dischi masterizzati in modo 1. Ho usato nero perche' Clone vedeva i cd danneggiati, e non riusciava a correggerli. Se la copia riesce in modo corretto basta rimasterizzare i cd e i problemi sono risolti. Spero di non essere troppo OT e di non aver scassato le b---e a nessuno. Ciao Nicola. P.s. I problemi nelle ricompilazione dei moduli che avevo trovato nella 8.1 qui non li ho riscontrati (E vai!!) - Salve, il messaggio che hai ricevuto è stato inviato per mezzo del sistema di web mail interfree. Se anche tu vuoi una casella di posta free visita il sito http://club.interfree.it Ti aspettiamo! -
Re: [newbie-it] CD Allegati a LinuxC difettosi
Il ven, 2002-05-10 alle 13:03, [EMAIL PROTECTED] ha scritto: Salve a tutti, invio questa mail, perche' mi e' successa una cosa strana. I CD della mdk8.2 allegati a Linuxc mi davano dei problemi durante l'installazione, il lettore continuava a rippare senza procedere, non completava il secon stage, etc. Ho saputo in facolta' di non essere l'unico con questo problema, ma visto che sono riuscito a risolverlo, posto il procedimento da me seguito, magari puo' essere utile a qualcuno. Quello che ho fatto e' stato creare delle copie dei CD tramite NERO, il quale permette di specificare il numero di tentativi di lettura da eseguire prima di dichiarare un errore, e inoltre consente un certo recovery dei settori danneggiai, anche quando questi siano su dischi masterizzati in modo 1. Ho usato nero perche' Clone vedeva i cd danneggiati, e non riusciava a correggerli. Se la copia riesce in modo corretto basta rimasterizzare i cd e i problemi sono risolti. Spero di non essere troppo OT e di non aver scassato le b---e a nessuno. Ciao Nicola. P.s. I problemi nelle ricompilazione dei moduli che avevo trovato nella 8.1 qui non li ho riscontrati (E vai!!) - Salve, il messaggio che hai ricevuto è stato inviato per mezzo del sistema di web mail interfree. Se anche tu vuoi una casella di posta free visita il sito http://club.interfree.it Ti aspettiamo! - Anche io ho avuto gli stessi problemi... Il lettore cd continua a scattare e non c'è verso di leggerlo. A me succede con il terzo cd. Qualcuno sa se è possibile avere un cambio di cd la LinuxC? Ciao, Pollo.
Re: [newbie-it] Mozilla, netscape, konqueror .....e java
Il 16:36, giovedì 9 maggio 2002, hai scritto: On Thu, 9 May 2002, max wrote: salve, ho provato con tutti i brwoser in oggetto ma proprio non riesco ad aprire questo sito: www.enteanas.it (niente paura è l'ANAS). Ci sono dei link a gare e lavori in corso ma...niente da fare. Possibile che un ente pubblico offre servizi importanti come gare d'appalto solo a chi ha i prodotti M$? O forse sono io che ho pasticciato con i plugin? Ogni delucidazione sarà olremodo gradita. Il problema e' che finche' molti siti che ci circondano sono stesi da uemasterrr preparati coi punti delle patatine, incapaci e trogloditi ... e dire che 'pare' che siano pure pagati :-/ A me appare anche un errore microsoft OLE DB Provider for ODBC Drivers ecc... Il perche' non funzionano i link e' presto detto, hai guardato nella barra di stato a cosa corrisponde ognuno di quei link? te lo dico io http://www.enteanas.it/home.asp; e http://www.enteansa.it/home.asp#; cioe' niente di nuovo! C'e' un escamotage cmq: fai clic su percorribilita' e poi scegli i link sulla sinistra. Grazie per l'escamotage...problema risolto! max ---
[newbie-it] CD Allegati a LinuxC difettosi
Salve a tutti, invio questa mail, perche' mi e' successa una cosa strana. I CD della mdk8.2 allegati a Linuxc mi davano dei problemi durante l'installazione, il lettore continuava a rippare senza procedere, non completava il secon stage, etc. Ho saputo in facolta' di non essere l'unico con questo problema, ma visto che sono riuscito a risolverlo, posto il procedimento da me seguito, magari puo' essere utile a qualcuno. Quello che ho fatto e' stato creare delle copie dei CD tramite NERO, il quale permette di specificare il numero di tentativi di lettura da eseguire prima di dichiarare un errore, e inoltre consente un certo recovery dei settori danneggiai, anche quando questi siano su dischi masterizzati in modo 1. Ho usato nero perche' Clone vedeva i cd danneggiati, e non riusciava a correggerli. Se la copia riesce in modo corretto basta rimasterizzare i cd e i problemi sono risolti. Spero di non essere troppo OT e di non aver scassato le b---e a nessuno. Ciao Nicola. P.s. I problemi nelle ricompilazione dei moduli che avevo trovato nella 8.1 qui non li ho riscontrati (E vai!!) - Salve, il messaggio che hai ricevuto è stato inviato per mezzo del sistema di web mail interfree. Se anche tu vuoi una casella di posta free visita il sito http://club.interfree.it Ti aspettiamo! -
[newbie-it] CD Allegati a LinuxC difettosi
Salve a tutti, invio questa mail, perche' mi e' successa una cosa strana. I CD della mdk8.2 allegati a Linuxc mi davano dei problemi durante l'installazione, il lettore continuava a rippare senza procedere, non completava il secon stage, etc. Ho saputo in facolta' di non essere l'unico con questo problema, ma visto che sono riuscito a risolverlo, posto il procedimento da me seguito, magari puo' essere utile a qualcuno. Quello che ho fatto e' stato creare delle copie dei CD tramite NERO, il quale permette di specificare il numero di tentativi di lettura da eseguire prima di dichiarare un errore, e inoltre consente un certo recovery dei settori danneggiai, anche quando questi siano su dischi masterizzati in modo 1. Ho usato nero perche' Clone vedeva i cd danneggiati, e non riusciava a correggerli. Se la copia riesce in modo corretto basta rimasterizzare i cd e i problemi sono risolti. Spero di non essere troppo OT e di non aver scassato le b---e a nessuno. Ciao Nicola. P.s. I problemi nelle ricompilazione dei moduli che avevo trovato nella 8.1 qui non li ho riscontrati (E vai!!) - Salve, il messaggio che hai ricevuto è stato inviato per mezzo del sistema di web mail interfree. Se anche tu vuoi una casella di posta free visita il sito http://club.interfree.it Ti aspettiamo! -
[newbie-it] CD Allegati a LinuxC difettosi
Salve a tutti, invio questa mail, perche' mi e' successa una cosa strana. I CD della mdk8.2 allegati a Linuxc mi davano dei problemi durante l'installazione, il lettore continuava a rippare senza procedere, non completava il secon stage, etc. Ho saputo in facolta' di non essere l'unico con questo problema, ma visto che sono riuscito a risolverlo, posto il procedimento da me seguito, magari puo' essere utile a qualcuno. Quello che ho fatto e' stato creare delle copie dei CD tramite NERO, il quale permette di specificare il numero di tentativi di lettura da eseguire prima di dichiarare un errore, e inoltre consente un certo recovery dei settori danneggiai, anche quando questi siano su dischi masterizzati in modo 1. Ho usato nero perche' Clone vedeva i cd danneggiati, e non riusciava a correggerli. Se la copia riesce in modo corretto basta rimasterizzare i cd e i problemi sono risolti. Spero di non essere troppo OT e di non aver scassato le b---e a nessuno. Ciao Nicola. P.s. I problemi nelle ricompilazione dei moduli che avevo trovato nella 8.1 qui non li ho riscontrati (E vai!!) - Salve, il messaggio che hai ricevuto è stato inviato per mezzo del sistema di web mail interfree. Se anche tu vuoi una casella di posta free visita il sito http://club.interfree.it Ti aspettiamo! -
[newbie-it] CD Allegati a LinuxC difettosi
Salve a tutti, invio questa mail, perche' mi e' successa una cosa strana. I CD della mdk8.2 allegati a Linuxc mi davano dei problemi durante l'installazione, il lettore continuava a rippare senza procedere, non completava il secon stage, etc. Ho saputo in facolta' di non essere l'unico con questo problema, ma visto che sono riuscito a risolverlo, posto il procedimento da me seguito, magari puo' essere utile a qualcuno. Quello che ho fatto e' stato creare delle copie dei CD tramite NERO, il quale permette di specificare il numero di tentativi di lettura da eseguire prima di dichiarare un errore, e inoltre consente un certo recovery dei settori danneggiai, anche quando questi siano su dischi masterizzati in modo 1. Ho usato nero perche' Clone vedeva i cd danneggiati, e non riusciava a correggerli. Se la copia riesce in modo corretto basta rimasterizzare i cd e i problemi sono risolti. Spero di non essere troppo OT e di non aver scassato le b---e a nessuno. Ciao Nicola. P.s. I problemi nelle ricompilazione dei moduli che avevo trovato nella 8.1 qui non li ho riscontrati (E vai!!) - Salve, il messaggio che hai ricevuto è stato inviato per mezzo del sistema di web mail interfree. Se anche tu vuoi una casella di posta free visita il sito http://club.interfree.it Ti aspettiamo! -
[newbie-it] CD Allegati a LinuxC difettosi
Salve a tutti, invio questa mail, perche' mi e' successa una cosa strana. I CD della mdk8.2 allegati a Linuxc mi davano dei problemi durante l'installazione, il lettore continuava a rippare senza procedere, non completava il secon stage, etc. Ho saputo in facolta' di non essere l'unico con questo problema, ma visto che sono riuscito a risolverlo, posto il procedimento da me seguito, magari puo' essere utile a qualcuno. Quello che ho fatto e' stato creare delle copie dei CD tramite NERO, il quale permette di specificare il numero di tentativi di lettura da eseguire prima di dichiarare un errore, e inoltre consente un certo recovery dei settori danneggiai, anche quando questi siano su dischi masterizzati in modo 1. Ho usato nero perche' Clone vedeva i cd danneggiati, e non riusciava a correggerli. Se la copia riesce in modo corretto basta rimasterizzare i cd e i problemi sono risolti. Spero di non essere troppo OT e di non aver scassato le b---e a nessuno. Ciao Nicola. P.s. I problemi nelle ricompilazione dei moduli che avevo trovato nella 8.1 qui non li ho riscontrati (E vai!!) - Salve, il messaggio che hai ricevuto è stato inviato per mezzo del sistema di web mail interfree. Se anche tu vuoi una casella di posta free visita il sito http://club.interfree.it Ti aspettiamo! -
Re: [newbie-it] CD Allegati a LinuxC difettosi
Ho visto evolution è molto ben fatto. Chi lo usa sa dirmi se gestisce + account? Sì gestisce + account, ma non lo uso perchè ogni volta che gli chiedo di stampare non lo fa e a volte crasha... :(( Un saluto.
[newbie-it] nicoladeglinnocenti
la persona in oggetto ha innestato qualche loop strano? Continuo a ricevere la stessa email! Ciao, lux __ Fai i tuoi acquisti su www.kwshopping.it
Re: [newbie-it] configurazione hardware (scusate per la lunghezza)
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Il 12:16, lunedì 6 maggio 2002, in merito a Re: [newbie-it] configurazione hardware (scusate per la lunghezza), carmine de pasquale ha scritto: se può servire allego pnpdump d (NAME TAG2117/46803539[0]{LECTRON Winet ISDNExpress PnP}) 2) scheda audio ectiva ev 1935 machone pci. non so come farla Multimedia audio controller: OPTi Inc. EV1935 ECTIVA MachOne PCI Audio (rev 16). Bus 0, device 12, function 0: VGA compatible controller: S3 Inc. ViRGE/DX or /GX (rev 1). IRQ 10. Bus 1, device 0, function 0: VGA compatible controller: S3 Inc. Trio 64 3D (rev 1). 5) non riesco ad avviare il serverx contemporaneamente con 2 schede video (agp e pci), anche se xf86cfg si avvia con entrambe, le configura, ma quando parte il serverx mi dà errore, riprova e parte con una sola scheda. * * # Refer to the XF86Config(4/5) man page for details about the format of # this file. # * * Section Files RgbPath /usr/X11R6/lib/X11/rgb # Multiple FontPath entries are allowed (they are concatenated together) # By default, Mandrake 6.0 and later now use a font server independent of # the X server to render fonts. FontPath unix/:-1 EndSection # * * # Server flags section. # * * Section ServerFlags # Uncomment this to cause a core dump at the spot where a signal is # received. This may leave the console in an unusable state, but may # provide a better stack trace in the core dump to aid in debugging #NoTrapSignals # Uncomment this to disable the CrtlAltBS server abort sequence # This allows clients to receive this key event. #DontZap # Uncomment this to disable the CrtlAltKP_+/KP_- mode switching # sequences. This allows clients to receive these key events. #DontZoom # This allows the server to start up even if the # mouse device can't be opened/initialised. AllowMouseOpenFail EndSection # * * # Input devices # * * # * * # Keyboard section # * * Section InputDevice Identifier Keyboard1 Driver Keyboard Option AutoRepeat 250 30 Option XkbRules xfree86 Option XkbModel pc105 Option XkbLayout it EndSection # * * # Pointer section # * * Section InputDevice Identifier Mouse1 Driver mouse Option ProtocolIMPS/2 Option Device /dev/mouse Option ZAxisMapping 4 5 # ChordMiddle is an option for some 3-button Logitech mice #Option ChordMiddle EndSection Section Module # This loads the DBE extension module. Load dbe # This loads the Video for Linux module. Loadv4l # This loads the miscellaneous extensions module, and disables # initialisation of the XFree86-DGA extension within that module. SubSection extmod #Option omit xfree86-dga EndSubSection # This loads the Type1 and FreeType font modules Load type1 Load freetype EndSection # * * # Monitor section # * * # Any number of monitor sections may be present Section Monitor Identifier Generic|Multi-frequenza che raggiunge 1280x1024 a 60 Hz VendorName Unknown ModelName Unknown # HorizSync is in kHz unless units are specified. # HorizSync may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS. HorizSync 31.5-64.3 # VertRefresh is in Hz unless units are specified. # VertRefresh may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS. VertRefresh 50-90 # This is a set of extended mode timings typically used for laptop, # TV fullscreen mode or DVD fullscreen output. # These are available along with standard mode timings. # Sony Vaio C1(X,XS,VE,VN)? # 1024x480 85.6 Hz, 48 kHz hsync ModeLine 1024x48065.00 1024 1032 1176 1344 480 488 494 563 -hsync -vsync # 768x576 79 Hz, 50 kHz hsync ModeLine 768x576
Re: [newbie-it] 8.2 - KMail
Mi rispondo da solo per completare i dati. allora, il problema non è solo con kmail ma anche con netscape e con evolution. Spediscono, ma NON ricevono la posta. qualche idea, per favore? grazie, g. Guido Milanese - [EMAIL PROTECTED] Vocal Ensemble Ars Antiqua - http://www.arsantiqua.org Salita del Passero 11, I-16126 Genova GE, Italy ** GAUDETE IN DOMINO SEMPER *
Re: [newbie-it] 8.2 - KMail (fwd)
Ri-invio il messaggio che sembre non essere arrivato: L'host che ti appare nell'account pop3 dovrebbe contenere il nome del server di posta in arrivo (nel tuo caso direi lo stesso del server smtp), altrimenti non si connette a nulla :)
Re: [newbie-it] alcuni piccoli problemi
Il Fri, 10 May 2002 00:00:17 +0200 (CEST) LukenShiro ha scritto: On Thu, 9 May 2002, skyheart wrote: sulla mia mandrake 8.2 - gnome non mantiene le impostazioni relative allo sfondo del dektop dopo l'uscita o il riavvio. Non saorei, la butto la': controlla che la directory $HOME/.gnome e i file in essa contenuto siano leggibili e scrivibili dall'utente [con ls -l] e di proprieta' dello stesso. Ora provo poi ti dico... -xwc non parte e devo killare ogni volta il processo (usando top + kill) Prova ad eseguirlo da un terminale di testo, magari ti dice qualcosa di significativo. A vevo già provato ma nn dice proprio nulla ...bè strano ma vero ora nn lo fa piu...mà. -- LU #210970 LM #98222 - MDK8.2 elaborata / 2.4.18-6mdk Ricorda: i motori di ricerca ti vogliono bene, non abbandonarli!! Netiquette al contrario (volutamente ironica): http://www.geocities.com/Athens/Parthenon/9704/galareteo.html
Re: [newbie-it] Trasferire file
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Il 21:59, giovedì 9 maggio 2002, in merito a Re: [newbie-it] Trasferire file, nicola ha scritto: Ciao, ho questo problema. Vorrei trasferire alcuni file scaricati via mail da linux a win. Ho provato a trasferirli nella dir /mnt/win_c/windows/desktop/nome del file ma mi segnala che è impossibile. che solo il superutente possa farci casini. Per poter copiare da utente dovresti modificare il file /etc/fstab, ma personalmente te lo sconsiglio, in quanto potresti involontariamente fare casini. io invece ti consiglio di capire come funzioni fstab ;-) e quindi di decidere se sia meglio una finestra sulla quale clikkare che ti costringa ad entrare come root per qualsiasi cosa o piuttosto, pensare a cosa fare prima di farlo.. ok mandrake semplifica le cose, ma sempre GNU/Linux è.. quindi metti noauto,users,showexec in fstab nella linea relativa al punto di montaggio della partizione vfat monterai TU, quando vuoi, la partizione, e potrai copiarci tutto, (sempre sapendo quello che fai e perchè) bye miKe __ Slackware 8 GNU/Linux 2.4.18 hp Xe3 R.U.#219755 - S.R.U.#705 - R.M.#110932 - -- -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.6 (GNU/Linux) Comment: For info see http://www.gnupg.org iD8DBQE83D9fF/9fksDJ4y0RAvnIAKC5imeIGV85jijb5nMXxEK/UfF9bwCeNuv7 oXxYhAkbCBRGBjYkQnJazLU= =e4Ms -END PGP SIGNATURE-
Re: [newbie-it] alcuni piccoli problemi
Il Fri, 10 May 2002 00:00:17 +0200 (CEST) LukenShiro ha scritto: On Thu, 9 May 2002, skyheart wrote: sulla mia mandrake 8.2 - gnome non mantiene le impostazioni relative allo sfondo del dektop dopo l'uscita o il riavvio. Non saorei, la butto la': controlla che la directory $HOME/.gnome e i file in essa contenuto siano leggibili e scrivibili dall'utente [con ls -l] e di proprieta' dello stesso. Ok, controllato, i permessi sono a posto. Copio qua sotto il file /home/nomeutente/.gnome/Background magari qualcuno ci vede qualcosa di strano. [Default] Enabled=true wallpaper=/home/alex/Documents/immagini/nat-old.jpg wallpaperAlign=3 color1=#ecdfcf color2=#efe7c6 simple=solid gradient=horizontal adjustOpacity=false opacity=-1 nautilus_theme=gnome wallpapers=3 wallpapers_dir=/usr/share/nautilus/patterns/dark-gnome.jpg wallpaper2=/usr/share/nautilus/patterns/brushed_metal.png wallpaper3=/usr/share/nautilus/patterns/dark-gnome.jpg Grazie e ciao -- SkyHeart -- Linux user cognitive dissident
[newbie-it] ancora icq
Allora... dalle mail precedenti è emerso che Licq dà un po di problemi per un cambiamento fatto dalla mirabilis, ho provato quindi a usare gnomeicu perchè qualcuno aveva detto che funzionava meglio, ma nulla inserendo il mio vecchio numero di icq mi ha autenticato 1 volta su 3 e quando ho tentato di aggingere un amico alla lista è andato in crash 2 volte su 2 (ho usato la versione che sta sul cd dell 8.2). Se così stanno le cose qualcuno mi dà un consiglio: quale client usare? Sul cd della 8.2 ce ne sono un po'che si dichiarano universali... quali sono le vostre esperienze? Grazie a tutti. Ciao -- SkyHeart -- Linux user cognitive dissident
[newbie-it] ICQ
Buona sera oh gloriosa mailinglist ^_^ il tedioso problema ICQ purtroppo al momento credo sia risolvibile solo in 2 modi :'''( il primo è licq 1.1 con tutti i suoi incolmabili limiti (dopo lo scempio made in mirabilis non si può creare nuovi account, autorizzare le persone ad aggiungerci alla loro contact list e tutto il resto... ma almeno funziona) il secondo dovrebbe essere vicq ma non ne ho mai trovato l'rpm e comunque è un programma che funziona in modalità testo (io sono agli inizi con linux e ho ancora il terrore di ciò che non è grafico) per il resto da quando è stato cambiato il protocollo tutti i programmi che non si sono ancora adattati sono inservibili. per quanto riguarda cambiare l'account confermo che è necessario usare il comando licq -b una_directory solo quando si possiede già un account icq perchè la registrazione con licq non funge... bisogna quindi prendersi la briga di fare prima un salto sul sito di icq da cui mi pare proprio che ci si possa registrare ciao ciao ^_^
Re: [newbie-it] ancora icq
On Sat, 11 May 2002, skyheart wrote: Se così stanno le cose qualcuno mi dà un consiglio: quale client usare? Sul cd della 8.2 ce ne sono un po'che si dichiarano universali... quali sono le vostre esperienze? Io ho sempre usato licq e lo sto usando ancora adesso :) (non pero' la versione ufficiale in dotazione alla distribuzione), una modificata in proprio da uno sviluppatore della Cooker. Direi che funziona piuttosto bene e riconosce il protocollo V8 (l'ultima vaccata appunto della consociata di AOL, mirabilis non ha piu' il controllo di icq ora), eliminando i problemi di messaggi a vuoto e i doppioni eterni. Non e' supportata in alcun modo e considerata ancora da testare: consiglio di prendere i pacchetti contrassegnati dal numero 1.1.0-... e piu' recenti. https://qa.mandrakesoft.com/~snailtalk/RPM/cooker/RPMS/ -- LU #210970 LM #98222 - MDK8.2 elaborata / 2.4.18-ac3 Ricorda: i motori di ricerca ti vogliono bene, non abbandonarli!! Netiquette al contrario (volutamente ironica): http://www.geocities.com/Athens/Parthenon/9704/galareteo.html
Re: [newbie-it] modem interno x sandro
Alle 08:53, venerdì 10 maggio 2002, hai scritto: Credo sia un problema con il DEVFS. Se cerchi il readme dei driver del lucent per la versione 8.1 troverai le istruzioni per sistemarlo. Fammi sapere se era questo Luigi Grazie, ci sto provando ma non va. Dato che l'ho fatto con un po' di fretta dopo ci riprovo seguendo le istruzioni passo-passo. Ciao e grazie Sandro -- Dr. Sandro Porrazzini - A.I.P. n. 2075 - [EMAIL PROTECTED] Mandrake Linux 8.1 on Pentium III 688 Mhz Linux Machine # 103048 Linux User # 203143
Re: [newbie] Problems Installing commercial ver. 8.2
On Fri, 2002-05-10 at 16:00, Greg Pettiford wrote: So I check all of them, click Install, and get the following error message depslist.ordered mismatch against hdlist files It then kicks me back to formatting and choosing a mount point. I have a felling that it may be a bad cd from the retail package, but am unable to get back to the store yet to exchange it and see. Any thoughts people? I have had similar problems whilst upgrading in the past if I didn't format the /var partition. If you are formatting the /var partition then I'm afraid that I'm stumped! Regards John... Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Problems Installing commercial ver. 8.2
See the errata. You are installing on a K6 or Pentium 1 and need a patch. It's easy - just download the patch to a dos floppy, press F1 and type patch at the start of the install. http://www.linux-mandrake.com/en/errata.php3 Brian On Fri, 2002-05-10 at 16:00, Greg Pettiford wrote: Hi Folks, I'm having a problem installing 8.2, right out of the box with the first CD. I was running 8.0 on a pc, dual boot with WinMe, and was going to install 8.2. I get thru to where I choose the packages to install, and the graphics only show a partial list of packages, like it doesn't want to show the entire graphic, just the check points for KDE, Workstation and choose individual packages. So I check all of them, click Install, and get the following error message depslist.ordered mismatch against hdlist files It then kicks me back to formatting and choosing a mount point. I have a felling that it may be a bad cd from the retail package, but am unable to get back to the store yet to exchange it and see. Any thoughts people? Thanks... Greg - And the sky was full of stars; each one an exploding ship, one of ours... _ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] getting a pop server going
It should start by itself when xinetd starts as the default configuration is for pop3d to run. You'll find the configuration file here: /etc/xinetd.d/pop3s You may also have to set hosts.allow to enable remote connections. Miark Brian Parish [EMAIL PROTECTED] saith: I need to set up a simple mail system using fetchmail, procmail and pop. Fetchmail is fetching happily. I've installed imap. I can see pop on my list of services under Control Center, but it's an xinetd service. Where do I go to configure and start it? I'll keep reading, but if anyone can give me a quick boot in the right direction... TIA Brian Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Quake3 in Linux - hot damn!
Glenn, 1) Download ftp://ftp.idsoftware.com/idstuff/quake3/linux/linuxq3apoint-1.31.x86.run 2) As root, run the file as follows: sh linuxq3apoint-1.31.x86.run 3) Insert your Winblows Quake 3 CD, and go to the baseq3 directory. 4) Copy the pak0.pk3 file to your hard drive as follows: cp pak0.pk3 to /usr/local/games/quake3/baseq3/pak0.pk3 5) Run the game by typing the following in a terminal: quake3 Miark Xaero [EMAIL PROTECTED] saith: I'd be interested in just knowing how to install Quake3 under Mandrake 8.2. What do I need to download? Do I need the Quake for Linux CD or is my Quake for that other OS CD good enough? Maybe someone could point me in the direction of a web site detailing Quake3 / Linux installs? Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] RPM's missing of Powerpacks?
Brian Parish [EMAIL PROTECTED] saith: Agreed Charles! Let's put the are they really there or not? question to bed. If ls -R cd-mnt-point | grep package-name can't see them, they are not there. The question now is: What does Mandrake do about it? Brian, Some of the RPM packages use capital letters, so a bare grep command may not find them if you search for lowercase letters. Cover both bases by, instead, doing a case insensitive search: grep -i package Miark Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Qn: Software Manager: replacing the Mandrake CD sources
thanks to Dimitris Loannou and Brandon Vanderg, and an un-named person who emailed me directly, i managed to do what i set out to do. for the benefit of anyone other newbie w/o a cdrom drive, the key bit of info is to point the mirror to the directory containing the Mandrake RPMS, eg ftp://mirrors.secsup.org/pub/linux/mandrake/Mandrake/8.2/i586/Mandrake/R PMS/ and set the relative path to hdlist correctly, in this case ../base/hdlist (i think the .cz part of hdlist.cz can be omitted) once again, thank you everyone. - Original Message - From: Stormjumper [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Thursday, May 09, 2002 3:35 PM Subject: [newbie] Qn: Software Manager: replacing the Mandrake CD sources hello, i installed Mandrake 8.2 Download Edition on an old system using the 3 downloaded cdroms, then subsequently remove the cd-rom drive. is there any way i can configure the Software Manager to point to sources on the web for packages in the cds? right now, i've added a few (valid?) sources, but they can only give me security upgrades and bug fixes. if i try to install any packages that exist(ed) on the install cd(s), i'm prompted for the mandrake cds. thanks Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] installing a tar.gz
To install a tarball you must first decompress it. tar -zxvf file.tar.gz z=ungzip x=extract v=verbose f=filename (I think) tar archives the files. gz compress's them this will create a directory with the files in it, cd into that directory and there will most likely be a INSTALL or README file, that'll tell you how to install it. Mandrake installs with glibc so the /w glibc package should work. If not, then download the static which should work by itself. -Jay Stojs said: Now is about time I learn how to install a tar ball. Could someone please give me detailed step by step instructions on how to install a tar ball. I need to know not only the steps I have to perform, but also why to take each step and what packages I need installed before starting. I use mandrake 8.2 download edition. I would very much appreciate instructions on how to install the audiogalaxy satellite and why I should choose the version w/ glibc or static. The program can be found at: http://www.audiogalaxy.com/satellite/download.php? I guess understanding the tars is a big step in my pinguinitiation (can anyone actually pronounce that word?). Big thanks in advance, Stojs -- Never do anything against conscience even if the state demands it. - Albert Einstein (1879-1955) Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
RE: [newbie] Noisy Processor Fans
I am sure I am not alone in thinking that these current higher powered processor fans are becoming very noisy. I came across Zalman's CNP S6000-CU Cooler on the web, which is claimed to be both very efficient and much quieter. Anyone got any experiences of it to relate to us. Perhaps some of you out there have some better models to suggest to us. John -- John Richard Smith [EMAIL PROTECTED] It's a small world! I too get annoyed about the noise levels from my PC, but couldn't find much about quiet processor fans when I recently replaced mine. Lo and behold, TheRegister (that website again!) has got an item about a new fan-less NEC PC, with a link to a company that supplies gizmos to quieten your current machine. Guess what: the website address is... www.quietpc.com ! Obvious or what? Richard PS If you find a quiet fan, could you let me know about it? Cheers. *** This e-mail and its attachments are intended for the above named recipient(s) only and are confidential and may be privileged. If they have come to you in error you must take no action based on them, nor must you copy or disclose them or any part of their contents to any person or organisation; please notify the sender immediately and delete this e-mail and its attachments from your computer system. Please note that Internet communications are not necessarily secure and may be changed, intercepted or corrupted. We advise that you understand and observe this lack of security when e-mailing us and we will not accept any liability for any such changes, interceptions or corruptions. Although we have taken steps to ensure that this e-mail and its attachments are free from any virus, we advise that in keeping with good computing practice the recipient should ensure they are actually virus free. Copyright in this e-mail and attachments created by us belongs to Littlewoods. Littlewoods takes steps to prohibit the transmission of offensive, obscene or discriminatory material. If this message contains inappropriate material please forward the e-mail intact to [EMAIL PROTECTED] and it will be investigated. Statements and opinions contained in this e-mail may not necessarily represent those of Littlewoods. Please note that e-mail communication may be monitored. Registered office: Littlewoods Retail Limited, Sir John Moores Building, 100 Old Hall Street, Liverpool, L70 1AB Registered no: 421258 http://www.littlewoods.com *** Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] Mounting spare Ext2 Partition
This is my fstab for LM8.2:- /dev/hda7 / ext2 defaults 1 1 /dev/hda9 /mnt/ext2-vol6 defaults 1 1 /dev/hda5 /boot ext2 defaults 1 2 /dev/hda1 /mnt/W2000 ntfs defaults 0 0 /dev/hda10 /mnt/ntfs-vol7 ntfs defaults 0 0 /dev/hda11 /mnt/ntfs-vol8 ntfs defaults 0 0 /dev/hda12 /mnt/ntfs-vol9 ntfs defaults 0 0 none /dev/pts devpts mode=0620 0 0 none /dev/shm tmpfs defaults 0 0 /dev/hdc/mnt/cdrom iso9660 ro,iocharset=iso8859-15,nosuid,noauto,exec,user,nodev 0 0 /dev/scd0 /mnt/cdrom2 iso9660 ro,iocharset=iso8859-15,nosuid,noauto,exec,user,nodev 0 0 /dev/fd0/mnt/floppy vfat umask=0,sync,nosuid,user,iocharset=iso8859-15,noauto,nodev,codepage=850,unhide 0 0 /dev/fd1/mnt/floppy2vfat umask=0,sync,nosuid,user,iocharset=iso8859-15,noauto,codepage=850,nodev,unhide 0 0 none /proc proc defaults 0 0 /dev/hda8 swap swap defaults 0 0 I recently added the second line to mount at run time a spare ext2 partition which I wanted to use as a store for downloads. It is fine, and indeed I am able to write to this spare partition. The only problem is that the run time script saysmount local files system, mount fs type defaults not supported which seems to me that it does not like my defaults 1 1 , I first chose 0 0 ,with the same result , Can anyone suggest a setting that would be agreeable to the boot script, or what am I doing wrong here. Note the spare partition is just that , no OS. John -- John Richard Smith [EMAIL PROTECTED] Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Noisy Processor Fans
Barran, Richard wrote: I am sure I am not alone in thinking that these current higher powered processor fans are becoming very noisy. I came across Zalman's CNP S6000-CU Cooler on the web, which is claimed to be both very efficient and much quieter. Anyone got any experiences of it to relate to us. It's a small world! I too get annoyed about the noise levels from my PC, but couldn't find much about quiet processor fans when I recently replaced mine. Lo and behold, TheRegister (that website again!) has got an item about a new fan-less NEC PC, with a link to a company that supplies gizmos to quieten your current machine. Guess what: the website address is... www.quietpc.com Right I've got experience with that particular Zalman cooler, I didn't purchase it from quietpc because it seemed somewhat expensive from there (I'm in the UK) It's used on my Audio/Video PC which sits in my front room... hence the need for something that was quiet. It's cooling a Celeron 900 and is completely silent at its slowest fan speed. It's not the highest performing cooler available, but it is one of the quietest. Now all I need is something to quieten the faint whirring noise from the harddrive... no spare 5 1/4 bay to put a drive muffler type enclosure in the tiny case that I'm using unfortunately. -- Dave Russell Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Mounting spare Ext2 Partition
The only problem is that the run time script saysmount local files system, mount fs type defaults not supported which seems to me that it does not like my defaults 1 1 , I first chose 0 0 ,with the same result , Can anyone suggest a setting that would be agreeable to the boot script, or what am I doing wrong here. Note the spare partition is just that , no OS. Compare the following two lines (tabbed for effect): /dev/hda7 / ext2defaults 1 1 /dev/hda9 /mnt/ext2-vol6 defaults 1 1 notice something missing? Regards, John... Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Possible stupid question/scsi emulation for parallel port scanner!
Ha,ha,ha!! Thanks a lot Brian for your time to reply me. On my way to the shops. I won't regret it. As you said, and you 're very right in this {everytime I look at my two sons I realize it even more},life is short and scanners are cheap. Thanks a lot anyway Dimitris --- Brian Parish [EMAIL PROTECTED] : Dimitris, I tried to get a parallel scsi emulated piece of HP junk going and found that it was theoretically possible. A web page accessed thru the SANE site indicated that all I needed to do was become a linux scanner interface design engineer. I figured I would have it going within three or four years and lost interest at that point. My advice - life is short - scanners are cheap. That said, I now have a nice new USB scanner. Works great - as long as I boot W$ to use it ;-) Message - read the compatibility list before going to the computer shop - but you knew that! HTH Brian P.S. Not a stupid question! There are none and this was less so than many - most of them mine. On Thu, 2002-05-09 at 16:51, Dimitris Ioannou wrote: Dear list I know this might be a stupid question but I have to ask it since this list is my last resort and I'm one step before going and buying a new scanner/Linux compatible. Is it possible to achieve a scsi emulation for parallel port scanner (bloody#$^! ACER340P)[a company that thinks of Linux as a Virus] in order to make it work with reported drivers as snapscan 310, 310s or Vuego 310s-as read in the Sane web page, or being detected by sane-scsi-scanner? TIA and please do not shoot the piano-player Dimitris Ioannou Do You Yahoo!? @yahoo.gr http://www.otenet.gr Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Do You Yahoo!? @yahoo.grhttp://www.otenet.gr Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] WG: some stupid cvs stuff
Title: Nachricht i've got a problem , i downloaded a cvs-snapshot from sourceforge . coz i got somekind of cvs probs [usually it works] now after untaring that tarball i've got 350 mb full of sourcecode i want to compile , but there's a problem : on every single file there is now the extension ',v' ... so if i want to compile the files can't see the others ... how can i get rid of these ,v ... there are tousands of files ... so how can i get rid of them in the whole cvs dir with subdirs etc ... i tried rename ,v [what do i have to place here that there is nothing after?] * but it would take me hours to go from dir to dir and rename them ... is there another way ? maybe during the untaring ? adi
RE: [newbie] Noisy Processor Fans
Hi Richard, It's a small world! I too get annoyed about the noise levels from my PC, but couldn't find much about quiet processor fans when I recently replaced mine. Lo and behold, TheRegister (that website again!) has got an item about a new fan-less NEC PC, with a link to a company that supplies gizmos to quieten your current machine. Guess what: the website address is... www.quietpc.com ! Obvious or what? Richard PS If you find a quiet fan, could you let me know about it? Cheers. Well, despite my previous bad pun, for which I have absolutely no remorse :-), I would still recommend the ThermalTake fans and the Volcano7/7+ for an excellent balance between cooling performance and noise. The fans being sold on the quietpc.com site are clocking in at about 22.5 dB, the Volcano fans start at about 27dB. Since they have variable speeds based on CPU temp they do get noisier if higher cooling levels are required but in my experience they spend most of their time at the slower fan speeds. Personally I am willing to put up with a slightly higher noise level if it means better cooling, particularly considering my passion for overclocking everything in sight :-) (Damn that toaster is FAST now!!) You can enhance the easy of cooling here through various methods, including using a copper shim between the proc and heatsink to increase the efficiency of heat dissipation. I would also tend to recommend a smart case fan that will again alter revs based on the ambient temp in the case. ThemarlTake does these as well. You may have gathered I am a bit of a fan of TT, this is because since using their kit I can actually put the case/cover on my PC without the temperature going through the roof! Believe me, when you overclock everything, that really is some feat!! Ideally of course I would tend to recommend the liquid cooling systems which effectively refridgerate your PC, often using a cooling pad mounted in the top of the case, since hot air rises :-) This means you only require a heatsink on the proc. This does have some associated noise, but very little. The MAJOR drawback of this type of cooling is cost, but if you really want to lose the sound of whirring fans totally and have a good few hundred £'s to spare... Steve. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Quake 3 stuff added....
On Thursday 09 May 2002 01:12 pm, you wrote: It ran just fine for me with the no sound option. And I'd *love* to install the ALSA drivers but they're such a pain every time I try. I can never seem to get it working :-\ Well, ALSA is installed by default, right? I mean, its already installed on a stock 8.2 setup? -- /\ DarkLord \/ Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Quake 3 stuff added....
On Thursday 09 May 2002 01:10 pm, you wrote: I suspect my mail about this must have gotten lost: I think we crossed somewhere, I did get another message from you about this. Thanks again though! ;-) I spoke to a CS friend of mine and he told me exactly how to do this. Make a script (I named mine q3a.sh, but it doesn't really matter) and put in it the following: killall artsd quake3 artsd Now, rather than type quake3, open the script to play and all will be fine! What I did after that to make it even easier is I created an icon on my desktop which linked to /usr/local/games/quake3/q3a.sh (which is, obviously, where I placed my script) So, now all I have to do is click on the icon and all works perfectly :) Hope I helped! Brian Here, on my setup, this does kill artsd, and start Quake 3however, it still exits out with a signal 11...killing the KDE server makes no diff. ;-( -- /\ DarkLord \/ Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
AW: [newbie] Quake 3 stuff added....
another question : how do i install mods in linux for q3 ??? --- ... XP , while X stands for cra -Ursprüngliche Nachricht- Von: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Im Auftrag von darklord Gesendet: Freitag, 10. Mai 2002 14:23 An: [EMAIL PROTECTED] Betreff: Re: [newbie] Quake 3 stuff added On Thursday 09 May 2002 01:12 pm, you wrote: It ran just fine for me with the no sound option. And I'd *love* to install the ALSA drivers but they're such a pain every time I try. I can never seem to get it working :-\ Well, ALSA is installed by default, right? I mean, its already installed on a stock 8.2 setup? -- /\ DarkLord \/ Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] The Register: Preinstalled Windows Illegal to Remove ?
On Friday 10 May 2002 12:20 am, you wrote: T'was indeed a humorous jab, but then my sense of humor may be a little different ;-) Thought so! ;-) And I'm sure you are indeed a nice guy - but then - you have a gun, so I'd just better say that eh? :-))) ;-) (just for the record though - I've never had to use a gun to dispute!) Don't shoot anyone I wouldn't! Bet thats a short list! lol cheers Brian Hehehehehe, did I mention that my .signature file used to read: Have gun, will travel ??? snicker -- /\ DarkLord \/ Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] another 2 distro boot (Help please Civileme!)
O Well, there has to be an initrd.image file somewhere ,it has to be found and put into the active /boot directory, because it you don't have one then it's a reinstall job . Grub is only another form of Lilo , it's where the boot script goes if you are using grub. I'm a bit rust with grub , haven't used it for a while, I stick to lilo these days, though there is nothing wrong with using grub as such , it hasn't been around so long as lilo and therefore has a reputation with some that it isn't as good as lilo. but I don't really know that . Each Linux OS has to have it's own kernel version and initrd.image file and they all go in the active /boot directory. You have LM 7.1 and LM8.2 , now I know that 7.1 does not have a very sofisticated lilo install programme and that is why it has to be installed first, on the otherhand LM8.2 can do it all where getting the lilo stanzas right is concerned. Can you get to desktop anywhere at the moment. Can you read all the the directories of both OS's from any Desktop . Surely if you installed 8.2 last you are on desktop in 8.2 at least. It's just a matter of getting into 7.1 and copying the intird.image file and kernel across to 8.2's /boot directory, and then writing your lilo/grub stanza to boot 7.1, and judging from your example ,this ought to do it. I guess your not getting into 7.1's OS at this time, and this is why your not finding the 7.1's initrd.image file , and kernel yes ? That's a good explanation. I am in 8.2 no problem. I have hdb5 (7.1) mountimg as /home/old, again no problem. No initrd to be found in /home/old/boot/, there is the problem that i started this thread with. Bascule seemed to be implying that it was unnesecary. snip lilo.conf OK, So you are on Desktop in 8.2 , and you say you have a /home/old/boot, This is not clear to me. If you have the 7.1 OS mounted there has to be an entry in the /etc/fstab file of LM8.2 to get it mounted. This file is read at boot time and provided the stanza to mount it is correct you will have a mounted 7.1 OS to go rummage around. I suspect that you don't have a mounted 7.1 OS in LM8.2. though I may be wrong. To get a mounted 7.1 partition in LM8.2 you have to do two things, 1) create a new directory in /mnt directory of LM8.2 this can be called anything , say call it LM7.1 2) add a line to /etc/fstab in LM8.2, mine looks like this:- /dev/hda9 /mnt/ext2-vol6 defaults 1 1 yours might look something like /dev/hdb5 /mnt/ext2-LM7.1 Play around with it a bit , maybe I got the definitions a little wrong somewhere , there are examples in fstab to help you go by. Then hopefully you have your 7.1 OS mounted in LM8.2, then go rummage around and find the kernel and initrd.image files for 7.1 and copy them across to the /boot directory of LM8.1, The go to /ect/lilo.conf in LM8.2 and add the the stanzas to boot it. This is basically the Silveleme method, maybe not the exact way he does it but it follows his principle. The only problem is that the newbie has to have all this extra knowledge to do it, whereas the DrakeX method of creating /boot /root/ /swap partition method everything is automated, all you the user have to do is make sure you get your lilo/grub stanzas correct as you install it. But lets see whether we can get Silveleme's method to work for you now that you have got this far. If you have any trouble with the abovementioned, maybe we could see what your LM8.2 fstab file looks like. -- John Richard Smith [EMAIL PROTECTED] Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Mounting spare Ext2 Partition
On Friday 10 May 2002 08:18 pm, John wrote: This is my fstab for LM8.2:- /dev/hda7 / ext2 defaults 1 1 /dev/hda9 /mnt/ext2-vol6 defaults 1 1 snip I recently added the second line to mount at run time a spare ext2 partition which I wanted to use as a store for downloads. It is fine, and indeed I am able to write to this spare partition. The only problem is that the run time script saysmount local files system, mount fs type defaults not supported which seems to me that it does not like my defaults 1 1 , I first chose 0 0 ,with the same result , Can anyone suggest a setting that would be agreeable to the boot script, or what am I doing wrong here. Note the spare partition is just that , no OS. John you haven't entered the filesystem type after the mount point. just add ext2 tween vol6 and defaults as you have above it for mounting root. David Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Mounting spare Ext2 Partition
On Friday 10 May 2002 12:07, you wrote: The only problem is that the run time script saysmount local files system, mount fs type defaults not supported which seems to me that it does not like my defaults 1 1 , I first chose 0 0 ,with the same result , Can anyone suggest a setting that would be agreeable to the boot script, or what am I doing wrong here. Note the spare partition is just that , no OS. Compare the following two lines (tabbed for effect): /dev/hda7 / ext2defaults 1 1 /dev/hda9 /mnt/ext2-vol6 defaults 1 1 notice something missing? Regards, John... Hmmm, so there is. -- John Richard Smith [EMAIL PROTECTED] Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] IRQ
I suspect the freeze problem I mentioned earlier is to do with IRQ conflicts, but how do I change IRQs? I've looked up every configuration tool I can find (Control Centre, linuxconf, webmin) and couldn't find anything that allows me to assign IRQs, or indeed do much at all to my hardware profile. Sir Robin Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] IRQ
Hi Robin, I suspect the freeze problem I mentioned earlier is to do with IRQ conflicts, but how do I change IRQs? I've looked up every configuration tool I can find (Control Centre, linuxconf, webmin) and couldn't find anything that allows me to assign IRQs, or indeed do much at all to my hardware profile. When using Linux IRQ assigning is handled by the BIOS, so your only chance would be to try and reserve IRQs there (e.g. for Legacy ISA devices) which then frees up and the IRQs rearrange. Another option might be to physically reseat the cards in the slots, however I am not sure if it has any effect when BIOS is handling the IRQs. Good luck Roman Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] installing a tar.gz
On Friday 10 May 2002 04:28 am, Stojs wrote: Now is about time I learn how to install a tar ball. Could someone please give me detailed step by step instructions on how to install a tar ball. I need to know not only the steps I have to perform, but also why to take each step and what packages I need installed before starting. I use mandrake 8.2 download edition. Should answer all your questions: http://www.mandrakeuser.org/docs/basics/index.html#csc FWIW, usin KDE, I just r-click on tarballs and choose 'Archiver' from the drop down menu, click on 'Action' and then 'Extract. Lot easier than 'tar x?f' from the CL. Konqueror will also open tarballs, just l-click on 'em. I also suggest you use a standard directory for upacking tarballs to. I use /home/tom/src/. Most tarballs when extracted will then create their own dir under /src. You can see what this dir is gonna be when you start Archiver. -- Tom BrinkmanCorpus Christi, Texas Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Mounting spare Ext2 Partition
On Friday 10 May 2002 12:07, you wrote: The only problem is that the run time script saysmount local files system, mount fs type defaults not supported which seems to me that it does not like my defaults 1 1 , I first chose 0 0 ,with the same result , Can anyone suggest a setting that would be agreeable to the boot script, or what am I doing wrong here. Note the spare partition is just that , no OS. Compare the following two lines (tabbed for effect): /dev/hda7 / ext2defaults 1 1 /dev/hda9 /mnt/ext2-vol6 defaults 1 1 notice something missing? Regards, John... Hmmm, so there is. Later, Actually No, The implication is that I missed mnt/ off, but actually hda7 is the boot OS ,not the spare exts partition (hda9) which I want to mount in order to gain access to it. ext2-vol6 is a directory in /mnt and the access point to the partion hda9. John -- John Richard Smith [EMAIL PROTECTED] Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] softhome is off?
On Thursday 09 May 2002 23:43, Damian G opened a general hailing frequency and transmitted to all open stations: is anyone able to connect to softhome's POP? as far as my machine can tell, it's dead! plz respond offline, as i suscribed to the lists with a softhome account and i am currently unable to retrieve the list messages. my wife has an account there, just got mail from it. looks fine from here. -- It is increasingly obvious that our techknowledgy is outpacing our humanity. -Einstein shane Profile at: http://dmoz.org/profiles/shen.html Proud to be a DMOZ editor since 10-98 Mandrake Users Club Member http://www.linux-mandrake.com/en/club/ Registered linux user #101606 http://counter.li.org/ Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Problems Installing commercial ver. 8.2
Yeah, I've got a K6 chip, I will download the patch and give it a try, thanks... greg --- And the sky was full of stars; each one an exploding ship, one of ours... - Original Message - From: Brian Parish [EMAIL PROTECTED] To: newbie [EMAIL PROTECTED] Sent: Friday, May 10, 2002 2:38 AM Subject: Re: [newbie] Problems Installing commercial ver. 8.2 See the errata. You are installing on a K6 or Pentium 1 and need a patch. It's easy - just download the patch to a dos floppy, press F1 and type patch at the start of the install. http://www.linux-mandrake.com/en/errata.php3 Brian On Fri, 2002-05-10 at 16:00, Greg Pettiford wrote: Hi Folks, I'm having a problem installing 8.2, right out of the box with the first CD. I was running 8.0 on a pc, dual boot with WinMe, and was going to install 8.2. I get thru to where I choose the packages to install, and the graphics only show a partial list of packages, like it doesn't want to show the entire graphic, just the check points for KDE, Workstation and choose individual packages. So I check all of them, click Install, and get the following error message depslist.ordered mismatch against hdlist files It then kicks me back to formatting and choosing a mount point. I have a felling that it may be a bad cd from the retail package, but am unable to get back to the store yet to exchange it and see. Any thoughts people? Thanks... Greg -- -- - And the sky was full of stars; each one an exploding ship, one of ours... _ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] file.PUB in LM8.1 ??
I don't know how to open a .pub file, but if you are mainly interested in the text contents and not all the glamorous formatting, you might try opening a shell, su to root, and then using a command-line the command: strings filename | less ENTER to see if you can either find out what kind of pub (publication) it is and to read and/or capture the text out of the file by piping the contents to a text file. On Thursday 09 May 2002 18:21, you wrote: Does anyone know how to open/read a file with a .pub extension while using LM8.1 ?? I just received this file and need to work on it. but can't open it. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] IRQ
On 10 May 2002 16:42 EEST you wrote: Hi Robin, I suspect the freeze problem I mentioned earlier is to do with IRQ conflicts, but how do I change IRQs? I've looked up every configuration tool I can find (Control Centre, linuxconf, webmin) and couldn't find anything that allows me to assign IRQs, or indeed do much at all to my hardware profile. When using Linux IRQ assigning is handled by the BIOS, so your only chance would be to try and reserve IRQs there (e.g. for Legacy ISA devices) which then frees up and the IRQs rearrange. Another option might be to physically reseat the cards in the slots, however I am not sure if it has any effect when BIOS is handling the IRQs. Hmm, this probably isn't my problem, then, since this hardware worked fine on 8.0, so the IRQs should be the same in 8.2. I'm surprised this hasn't come up in the errata, since I don't think there's anything weird about my hardware. In case it rings any bells, here's the full spec Pentium II-MX 350 MHz 128 MB RAM Creative CDROM CD4020E GeForce 2 MX/400 Intel 82371AB/EB PCI bus master Intel 82371AB/EB PCI to ASI bridge Intel 82443BX processor to AGP controller Intel 82443BX processor to PCI bridge Award PCI BIOS Cirrus Logic internal modem (not detected because) Inca external modem CE motherboard Creative AWE64 soundcard Creative Wavetable (configuration later removed with kudzu) BTW, these freezes only seem to be happening when I'm online. Sir Robin Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Macintosh Networking (was vNC)
Dave - but it's not cheap. RichardA Terry Smith, Friday 10 May 2002 04:07: I believe there is also a commercial program (name?) which emulates MS networking. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] OT: What can I use to open a Corel Draw Vector drawing file
I have a couple of files that are .cdr Corel Draw Vector drawing files and I do not have Corel Draw. Is there a program that will open these files for editing??? I don't want to have to purchase Corel Draw to open these files. Thanks Mike Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] q3 warning and question
ok, so after all the quake 3 talk i decide i should at least run the demo, right? first the warning, i don't know if this applies to to all versions or just the linux only demo, but if your xfree config doesn't have the resolution you are playing in, your art playing. it is unbelievably slow. since the demo defaults to 640x480 and my lowest resolution is 800, the default is so slow i can barely move the curser. at 1024 (my usual operating resolution) it is rocket fast. very odd. second, the question for those playing already, is the screen brightness adjustable in the full version? in the demo it is not, or at least doesn't seem to be. i found a slider, can't select it. on my 6 year old monitor that needs to be replaced soon i feel like i am wearing sunglasses on a moonlit night.. or, anyone with a screen that goes to higher res than 1024 they aren't using? :-D -- Help Microsoft stamp out piracy. Give Linux to a friend today. shane Profile at: http://dmoz.org/profiles/shen.html Proud to be a DMOZ editor since 10-98 Mandrake Users Club Member http://www.linux-mandrake.com/en/club/ Registered linux user #101606 http://counter.li.org/ Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] Nautilus
Having a small problem here After removing the old KDE3 and installing the Texstar CVS RPMs I guess I forgot to install some package having to do with nautilus. I HAVE Nautilus but it has no text and a few other problems. Anyone got any ideas? Thanks! Brian Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] Simple line in recording
What would be the simplest way to do a recording using the line in on my soundcard? I'm using 8.2 with a SBLive 5.1 Platinum (with Live!Drive, but I don't feel like tackling that today). Is there software (a simple wav editor would be great) that comes installed by default on the 8.2 download discs? If not, what would be a good one to go get? Thanks! - peace, Rog Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] AbiWord 1.0.1
Hey folks, me again. :-[ I'm having two problems with AbiWord 1.0.1 - the first has to do with fonts. When I start it up, I get this message: AbiWord was not able to add its fonts to the X font path. This does not mean that there is anything wrong with your system, but you will need to modify your font path manually. Please see Unix Font Path Problems in the FAQ section of the AbiWord help file for more detailed information, including instructions on how to turn this warning off. Now, I looked for above said section and could not find it :( I looked every else where it said stuff about fonts and could not find anything referring to my problem and how to fix it :( After I hit OK in the warning box, AbiWord opens and *seems* to be working fine, but I must admit all I've used it for so far is to type this is a test in a couple different fonts and print it off. Anyone able to help??? On a much lighter and simpler note, the window size that it opens to is a bit annoying. The width is just too small to show the full toolbar on top and it cuts off some of the right side of the page. I know the size window it opens is in a config file somewhere so I was hoping one of you could point me in its direction. Thanks Brian Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] ssh problem?
I'm trying to get CVS to work from my linux box across to the server which is running hpux and I get this error. I thought my problem was that ssh was not installed on the hp machine. It now is installed but I still get the following error. ssh: connect to address a.b.c.d port 22: Connection refused I tried watching the packets in ethereal but it didn't give me any info that helped. Is something not running? Have I configured something wrong? How can I determine if the problem is my box or the other box? TIA Jeanie Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] Lost Rat
Hi Guys Just installed 8.2 onto my new PC and if I log out of KDE the mouse stops working, forcing a reboot. The rat was detected as an ordinary PS2 type, which it is, and I have enabled IRQ12 in the bios for sole use by a ps2 rat. I am using an ASUS AN7266-E motherboard with an Athlon XP1900+ CPU, should these be the cause. Thanks and regards Mark A
Re: [newbie] q3 warning and question
shane [EMAIL PROTECTED] saith: ok, so after all the quake 3 talk i decide i should at least run the demo, right? Um... why? That download is _much_ larger that the one to just install the regular game. Or do you not have Q3 yet? (Shame on you if you don't ;-) ...the default is so slow i can barely move the curser. at 1024 (my usual operating resolution) it is rocket fast. very odd. Good problem to have, I suppose. second, the question for those playing already, is the screen brightness adjustable in the full version? Yes, absolutely. or, anyone with a screen that goes to higher res than 1024 they aren't using? :-D Just gave away my last one :-( Miark Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] IRQ
On 10 May 2002 18:42 EEST you wrote: This is a multi-part message in MIME format... =_1021044596-31891-1579 On 10 May 2002 16:42 EEST you wrote: Hi Robin, I suspect the freeze problem I mentioned earlier is to do with IRQ conflicts, but how do I change IRQs? I've looked up every configuration tool I can find (Control Centre, linuxconf, webmin) and couldn't find anything that allows me to assign IRQs, or indeed do much at all to my hardware profile. When using Linux IRQ assigning is handled by the BIOS, so your only chance would be to try and reserve IRQs there (e.g. for Legacy ISA devices) which then frees up and the IRQs rearrange. Another option might be to physically reseat the cards in the slots, however I am not sure if it has any effect when BIOS is handling the IRQs. Hmm, this probably isn't my problem, then, since this hardware worked fine on 8.0, so the IRQs should be the same in 8.2. I'm surprised this hasn't come up in the errata, since I don't think there's anything weird about my hardware. In case it rings any bells, here's the full spec Pentium II-MX 350 MHz 128 MB RAM Creative CDROM CD4020E GeForce 2 MX/400 Intel 82371AB/EB PCI bus master Intel 82371AB/EB PCI to ASI bridge Intel 82443BX processor to AGP controller Intel 82443BX processor to PCI bridge Award PCI BIOS Cirrus Logic internal modem (not detected because) Inca external modem CE motherboard Creative AWE64 soundcard Creative Wavetable (configuration later removed with kudzu) BTW, these freezes only seem to be happening when I'm online. One install later (tried seeing if pulling out my USB leads and not configuring the soundcard would do the trick) I'm still getting exactly the same thing. Looks like it's time to go back to 8.0 for a while. :-( Sir Robin the Vanquished Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] q3 warning and question
On Friday 10 May 2002 11:01, Miark opened a general hailing frequency and transmitted to all open stations: Um... why? That download is _much_ larger that the one to just install the regular game. Or do you not have Q3 yet? (Shame on you if you don't ;-) yeah, shame on me, i have 2 but not 3. slacker. ;P or, anyone with a screen that goes to higher res than 1024 they aren't using? :-D Just gave away my last one :-( typical. :-D -- Microsoft: The company that made web browsing dangerous. shane Profile at: http://dmoz.org/profiles/shen.html Proud to be a DMOZ editor since 10-98 Mandrake Users Club Member http://www.linux-mandrake.com/en/club/ Registered linux user #101606 http://counter.li.org/ Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] why fsck is not automatic ?
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Why when I have a system crash, a partition not umounted, the fsck is not automatic and I have to press Y to make it happen ? How can I configure the old way, automatic fsck when filesystem not umounted ? And BTW how can I schedule an fsck to the next reboot ? Thank you. - -- Pupeno: [EMAIL PROTECTED] http://www.pupeno.com.ar -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.6 (GNU/Linux) Comment: For info see http://www.gnupg.org iD8DBQE83Af7WhjnmGRO4vQRAhiOAKCMGKb1UQpXuE20RmWtINrkAe/EsACgqF5y ZQbpwj14xgs9Wm2WWe6NdUA= =1IaV -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] q3 warning and question
ok, so after all the quake 3 talk i decide i should at least run the demo, right? Um... why? That download is _much_ larger that the one to just install the regular game. Or do you not have Q3 yet? (Shame on you if you don't ;-) Yeah, in case you didn't know, you can get the Linux Q3A for about $10 - that's what I bought it for from Best Buy at least - aluminum case and all :-D Brian Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] q3 warning and question
On Friday 10 May 2002 12:48, Brian Koppe opened a general hailing frequency and transmitted to all open stations: Um... why? That download is _much_ larger that the one to just install the regular game. Or do you not have Q3 yet? (Shame on you if you don't ;-) Yeah, in case you didn't know, you can get the Linux Q3A for about $10 - that's what I bought it for from Best Buy at least - aluminum case and all :-D when you suck like i do $10 is a lot to get fragged for a few hours a week.. ;) -- Your mouse has moved. Windows must be rebooted to acknowledge this change. shane Profile at: http://dmoz.org/profiles/shen.html Proud to be a DMOZ editor since 10-98 Mandrake Users Club Member http://www.linux-mandrake.com/en/club/ Registered linux user #101606 http://counter.li.org/ Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Simple line in recording
On Fri, 10 May 2002 13:13:30 -0400 (EDT) Roger Sherman [EMAIL PROTECTED] wrote: What would be the simplest way to do a recording using the line in on my soundcard? I'm using 8.2 with a SBLive 5.1 Platinum (with Live!Drive, but I don't feel like tackling that today). Is there software (a simple wav editor would be great) that comes installed by default on the 8.2 download discs? If not, what would be a good one to go get? Thanks! - peace, Rog After some experimenting just now with ML8.2 to get recording working I found the sox-12.17.1-3mdk RPM (it's on the download edition) can do this (among many other things), see 'man rec'. Don't forget to adjust mixer settings ;) I'm sure there are GUI solutions but I don't know one now :( The audacity-0.98-6mdk RPM (also on the download edition) looks like a nice .wav editor. HTH and have fun, -Frans Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] why fsck is not automatic ?
On 10 May 2002 21:58 EEST you wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Why when I have a system crash, a partition not umounted, the fsck is not automatic and I have to press Y to make it happen ? How can I configure the old way, automatic fsck when filesystem not umounted ? And BTW how can I schedule an fsck to the next reboot ? If you have ext3 or Reiser, fsck is not normally necessary, so it doesn't run by default. I pressed Y a few times out of curiosity (I'm getting a lot of practice it dirty reboots at the moment!) and it only did a few piddly things, unlike the swathe of stuff it went through when I had ext2. Not sure how you can make it run, though there's bound to be something in the startup script you can hack as a last resort. Another thing I noticed is that on bootup, kudzu works the same way, but you don't see it in graphic bootup, you need to run linux no-fb. Sir Robin Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] Chkrootkit shows nothing?
A few days ago, I got some KWrited docs popping up on my Mandrake 8.1 desktop (Security warning: World Writeable files found followed by a long list of files located on both hardrives). I am a linux newbie and assumed the popups were the product of some kind of monitoring utility that I had inadvertently installed. Although I have a simple workstation setup (except for the extra partitions and triple boot aspect to it) and installed 8.1 with medium security, I went back into the control panel and re-set it to medium security and the Kwrited popups stopped appearing. From the lists of files displayed, I assumed my machine had been compromised and that I would have to partition, reformat, reload the win98, mandrake 8.1 and Redhat 5.1 partition in order to make things right. I downloaded chkrootkit and ran it while booted to the main HD/ Mandrake 8.1 just to see what was up. Surprisingly it showed nothing. I'm not sure why that is. I am not familiar with chkrootkit and may have failed to run it so that it searched all of the drives. Can anyone tell me how to run it to seach RH 5.1 or the win98SE partition? Can that be done from 8.1 on the other drive as I attempted? Does it check comprehensively or does it only check the drive/OS that it is booted to? Secondly, is it possible that, despite the KWrited popops that occured on 2 different occasions, my machine is unnaffected? dan Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Mounting spare Ext2 Partition
John Richard Smith wrote: On Friday 10 May 2002 12:07, you wrote: The only problem is that the run time script saysmount local files system, mount fs type defaults not supported which seems to me that it does not like my defaults 1 1 , I first chose 0 0 ,with the same result , Can anyone suggest a setting that would be agreeable to the boot script, or what am I doing wrong here. Note the spare partition is just that , no OS. Compare the following two lines (tabbed for effect): /dev/hda7 / ext2defaults 1 1 /dev/hda9 /mnt/ext2-vol6 defaults 1 1 notice something missing? Regards, John... Hmmm, so there is. Later, Actually No, The implication is that I missed mnt/ off, but actually hda7 is the boot OS ,not the spare exts partition (hda9) which I want to mount in order to gain access to it. ext2-vol6 is a directory in /mnt and the access point to the partion hda9. John Johnyou missed John's point. Try the edited entry below. /dev/hda7 / ext2defaults 1 1 /dev/hda9 /mnt/ext2-vol6 ext2defaults 1 1 -- Alan :) Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Simple line in recording
On Fri, 10 May 2002, Frans Ketelaars wrote: On Fri, 10 May 2002 13:13:30 -0400 (EDT) Roger Sherman [EMAIL PROTECTED] wrote: What would be the simplest way to do a recording using the line in on my soundcard? I'm using 8.2 with a SBLive 5.1 Platinum (with Live!Drive, but I don't feel like tackling that today). Is there software (a simple wav editor would be great) that comes installed by default on the 8.2 download discs? If not, what would be a good one to go get? Thanks! - peace, Rog After some experimenting just now with ML8.2 to get recording working I found the sox-12.17.1-3mdk RPM (it's on the download edition) can do this (among many other things), see 'man rec'. Don't forget to adjust mixer settings ;) OK, that seems as though it'll work...the man page is not providing a whole lot of help, though. I tried just rec track1.wav, with a minidisc playing on the line in (set at about mid-level on kmix), but when I played it back, I just heard static...I looked the man page up and down, but really I wasn't sure what I was looking at...perhaps I wasn't giving enough information? Maybe I had to specify something that I wasn't...anyone know enough about this program to point me in the right direction? I'm sure there are GUI solutions but I don't know one now :( That's fine...I'm pretty happy on the command line :-) The audacity-0.98-6mdk RPM (also on the download edition) looks like a nice .wav editor. HTH and have fun, Thanks, man! - peace, Rog Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Application launches from command line but not from menu - SOLVED
On Thu, 9 May 2002 22:38:44 -0500 Dennis Myers [EMAIL PROTECTED] wrote: On Monday 06 May 2002 09:22 pm, you wrote: That fixed it; thanks! Ok, I give up where is the menu properties you are talking about, located? I would like to fix this problem also, but can't find a menu properties. TIA This is aka MenuDrake. In KDE 2, K, Configure Panel, Menu Editor. Then locate Image Magick (mine is under Multimedia--Graphics). HTH, Todd -- Todd Slater 5:39pm up 1 day, 9:49, 3 users, load average: 0.73, 0.45, 0.18 2.4.8-26mdk The whole theory of modern education is radically unsound. Fortunately... education produces no effect whatsoever. If it did, it would prove a serious danger to the upper classes, and probably lead to acts of violence in Grosvenor Square. (Oscar Wilde) Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] Memory Usage - Caching
I've noticed that a lot of my 64mb of memory shows up as cached when i do cat /proc/meminfo (i included the output) and i've been wondering if it's normal for linux to use up so much memory. Since i have a limited supply i'd like to have as much free as possible. So my questions are: is it nessecary to have linux cache so much memory and if not then how do i change it to a more suitable setting? -- Where'd you get your CPU, a box of Crackerjacks!? -Wierd Al total:used:free: shared: buffers: cached: Mem: 63741952 61923328 1818624 204800 1462272 39419904 Swap: 254943232 34906112 220037120 MemTotal:62248 kB MemFree: 1776 kB MemShared: 200 kB Buffers: 1428 kB Cached: 23236 kB SwapCached: 15260 kB Active: 36516 kB Inact_dirty: 2968 kB Inact_clean: 640 kB Inact_target: 832 kB HighTotal: 0 kB HighFree:0 kB LowTotal:62248 kB LowFree: 1776 kB SwapTotal: 248968 kB SwapFree: 214880 kB NrSwapPages: 53720 pages Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Quake3 in Linux - hot damn!
Miark wrote: Glenn, 1) Download ftp://ftp.idsoftware.com/idstuff/quake3/linux/linuxq3apoint-1.31.x86.run 2) As root, run the file as follows: sh linuxq3apoint-1.31.x86.run 3) Insert your Winblows Quake 3 CD, and go to the baseq3 directory. 4) Copy the pak0.pk3 file to your hard drive as follows: cp pak0.pk3 to /usr/local/games/quake3/baseq3/pak0.pk3 5) Run the game by typing the following in a terminal: quake3 Miark Xaero [EMAIL PROTECTED] saith: I'd be interested in just knowing how to install Quake3 under Mandrake 8.2. What do I need to download? Do I need the Quake for Linux CD or is my Quake for that other OS CD good enough? Maybe someone could point me in the direction of a web site detailing Quake3 / Linux installs? *smiles* Thx Miark, fast learner aren't you? :) And fwiw, i made a shortcut on the desktop to Q3 for myself. -- Femme Good Decisions You boss Made: We'll do as you suggest and go with Linux. I've always liked that character from Peanuts. - Source: Dilbert Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Mounting spare Ext2 Partition
On Sat, 2002-05-11 at 01:32, John Richard Smith wrote: Compare the following two lines (tabbed for effect): /dev/hda7 / ext2defaults 1 1 /dev/hda9 /mnt/ext2-vol6 defaults 1 1 notice something missing? Regards, John... Hmmm, so there is. Later, Actually No, The implication is that I missed mnt/ off, but actually hda7 is the boot OS ,not the spare exts partition (hda9) which I want to mount in order to gain access to it. ext2-vol6 is a directory in /mnt and the access point to the partion hda9. Look again, In the first entry you have specified, correctly, the device, the mountpoint and the filesystem type. In the second entry you have specified the device and the mountpoint, but no filesystem type! That's why the system complains of unknown filesystem type 'defaults'. Regards, John... Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Noisy Processor Fans
Barran, Richard wrote: I am sure I am not alone in thinking that these current higher powered processor fans are becoming very noisy. I came across Zalman's CNP S6000-CU Cooler on the web, which is claimed to be both very efficient and much quieter. Anyone got any experiences of it to relate to us. Perhaps some of you out there have some better models to suggest to us. John -- John Richard Smith [EMAIL PROTECTED] It's a small world! I too get annoyed about the noise levels from my PC, but couldn't find much about quiet processor fans when I recently replaced mine. Lo and behold, TheRegister (that website again!) has got an item about a new fan-less NEC PC, with a link to a company that supplies gizmos to quieten your current machine. Guess what: the website address is... www.quietpc.com ! Obvious or what? Richard PS If you find a quiet fan, could you let me know about it? Cheers. FWIW i know ppl have taken the stuff you line cars with *some sort of foam rubber* sealed the inside of their cases with that to reduce noise quite a bit. You may want to look into it? -- Femme Good Decisions You boss Made: We'll do as you suggest and go with Linux. I've always liked that character from Peanuts. - Source: Dilbert Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Noisy Processor Fans
I nailed my linux box to the desk because I thought it was going to take off. Two power supply fans, three case fans, a CPU fan, and one other little booger doing something in there. I thought that was normal. Lee On Friday 10 May 2002 06:49 am, Dave Russell wrote: Barran, Richard wrote: I am sure I am not alone in thinking that these current higher powered processor fans are becoming very noisy. I came across Zalman's CNP S6000-CU Cooler on the web, which is claimed to be both very efficient and much quieter. Anyone got any experiences of it to relate to us. It's a small world! I too get annoyed about the noise levels from my PC, but couldn't find much about quiet processor fans when I recently replaced mine. Lo and behold, TheRegister (that website again!) has got an item about a new fan-less NEC PC, with a link to a company that supplies gizmos to quieten your current machine. Guess what: the website address is... www.quietpc.com Right I've got experience with that particular Zalman cooler, I didn't purchase it from quietpc because it seemed somewhat expensive from there (I'm in the UK) It's used on my Audio/Video PC which sits in my front room... hence the need for something that was quiet. It's cooling a Celeron 900 and is completely silent at its slowest fan speed. It's not the highest performing cooler available, but it is one of the quietest. Now all I need is something to quieten the faint whirring noise from the harddrive... no spare 5 1/4 bay to put a drive muffler type enclosure in the tiny case that I'm using unfortunately. -- Registered Linux abuser #223705 The best indication that there is intelligent life elsewhere is that they haven't contacted us. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Quake3 in Linux - hot damn!
I'm downloading the file now. Thanks ;) Es Divendres 10 Maig 2002 01:53, en FemmeFatale va escriure: Joan Tur wrote: Es Dijous 09 Maig 2002 07:41, en Miark va escriure: If any of you play Quake 3 in Windows, but not Linux, you GOTTA try it. I get virtually the same frame rate in 1280x1024 in Linux as I get playing 800x600 in Windows, and maps load at least twice as fast, maybe even three times as fast. This is awesome. What do I have to do to have Q3 working under Linux?? 8-? Thanks!! runs fine... i used the .sh file from id's ftp site: ftp://ftp.idsoftware.com/idstuff/quake3/linux/ Enter these commands in a Term window as yourself *not root*: d/l point release *you want the file ending in .sh* type su in terminal then 'sh nameofpr.sh' put in your quake3 cd then in the terminal switch to cdrom mount point then type 'cd baseq3' then type 'cp pak0.pk3 to /usr/local/games/quake3/baseq3/pak0.pk3' wait... then enjoy :) works fine with the current Nvidia drivers I use. -- Joan Tur. Ibiza - Spain AOL quini2k ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] The Register: Preinstalled Windows Illegal to Remove ?
On Friday 10 May 2002 17:05, Derek Byram opened a general hailing frequency and transmitted to all open stations: i won't argue the dumb part, but i will point out that in his book billyg says that the next big advancement in computers will come when we find a fast easy way to factor prime numbers. ...left as an exercise for the reader. seems to me this has become a flamethrower war :) ? well mostly, but the flames in the post are from linux towards bill gates, so... how many here on this list want to defend bill? don't all speak up at once! ;) -- you can have peace or freedom, but never count on both at once -heinlein shane Profile at: http://dmoz.org/profiles/shen.html Proud to be a DMOZ editor since 10-98 Mandrake Users Club Member http://www.linux-mandrake.com/en/club/ Registered linux user #101606 http://counter.li.org/ Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] i586 v i686
On Thursday 09 May 2002 09:31 pm, you wrote: i586 will work on machines with a Pentium class processor or newer. That is, anything newer than a 486. i686 will work on machines with a Celeron, Pentium II, or newer. Thus my AMD K6 box can use RPMs for either i586 or i686, but my AMD K5 box can only use RPMs for i586. I propose that Mandrake writes a program, if such thing does not already exist, to test the CPU and tell the user which rpm to use, i486, i586, i686 or god knows what is next. I propose that this program also be part of the os installation hardware detection. The CPU is just a peripheral that requires its own driver, after all! Seedkum Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] The Register: Preinstalled Windows Illegal to Remove ?
On Saturday 11 May 2002 03:28, you wrote: On Friday 10 May 2002 17:05, Derek Byram opened a general hailing frequency and transmitted to all open stations: i won't argue the dumb part, but i will point out that in his book billyg says that the next big advancement in computers will come when we find a fast easy way to factor prime numbers. ...left as an exercise for the reader. seems to me this has become a flamethrower war :) ? well mostly, but the flames in the post are from linux towards bill gates, so... how many here on this list want to defend bill? don't all speak up at once! ;) i can't defend billy boy, his software went downhill after 3.11 *G* -- derek Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] Any ideas? - 8.2 w/ Celeron GA-6VX7-4X Motherboard
I just got this machine as a cheap system to learn Linux on, but it won't install correctly. As soon as it gets to the boot floppy creation step, I click 'No' and it freezes immediately. That's in Expert mode. In regular mode, it gets all the way to the X video mode selection and freezes at a black screen, apparently after trying a video mode. Here's my hardware: Gigabyte motherboard: GA-6VX7-4X 256MB ram Celeron 800 CPU 27.3GB IBM drive S3 Virge/VX PCI video card (the computer won't even boot with my AGP Voodoo3500) Microsoft Natural Pro USB Intellimouse Explorer Thanks, Barry Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] semi OT redhat battles the evil empire?
ok, saw an article on this, was shocked, forgot about it. went to the store tonight. saw it again. now i am just confused. redhat is currently offering a rebate if you are changing over from another OS. cool you say more reason to leave windows! if only redhats rebate goes to users of mandrake and suse. i have often said that there are a few beginer or desktop only distros like redmond but only 2 complete distros, mandrake and suse. does this mean redhat agrees? -- Chaos! Panic! Disaster! (My work here is done) shane Profile at: http://dmoz.org/profiles/shen.html Proud to be a DMOZ editor since 10-98 Mandrake Users Club Member http://www.linux-mandrake.com/en/club/ Registered linux user #101606 http://counter.li.org/ Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] another 2 distro boot (DONE)
On Saturday 11 May 2002 12:22 am, you wrote: O Well, there has to be an initrd.image file somewhere ,it has to be found and put into the active /boot directory, because it you don't have one then it's a reinstall job . Grub is only another form of Lilo , it's where the boot script goes if you are using grub. I'm a bit rust with grub , haven't used it for a while, I stick to lilo these days, though there is nothing wrong with using grub as such , it hasn't been around so long as lilo and therefore has a reputation with some that it isn't as good as lilo. but I don't really know that . Each Linux OS has to have it's own kernel version and initrd.image file and they all go in the active /boot directory. You have LM 7.1 and LM8.2 , now I know that 7.1 does not have a very sofisticated lilo install programme and that is why it has to be installed first, on the otherhand LM8.2 can do it all where getting the lilo stanzas right is concerned. Can you get to desktop anywhere at the moment. Can you read all the the directories of both OS's from any Desktop . Surely if you installed 8.2 last you are on desktop in 8.2 at least. It's just a matter of getting into 7.1 and copying the intird.image file and kernel across to 8.2's /boot directory, and then writing your lilo/grub stanza to boot 7.1, and judging from your example ,this ought to do it. I guess your not getting into 7.1's OS at this time, and this is why your not finding the 7.1's initrd.image file , and kernel yes ? That's a good explanation. I am in 8.2 no problem. I have hdb5 (7.1) mountimg as /home/old, again no problem. No initrd to be found in /home/old/boot/, there is the problem that i started this thread with. Bascule seemed to be implying that it was unnesecary. snip lilo.conf OK, So you are on Desktop in 8.2 , and you say you have a /home/old/boot, This is not clear to me. Yes i had Mandrake 8.2 booting okay under LILO. I had Mandrake 7.1 mounting automatically on boot as /home/old. I had edited fstab to include it. No initrd file to be found in amongst my 7.1 files anywhere. I had done file searches from within konq on initrd* searching through the /home/old directory structure (recursive searching and case insensitive searching were both selected). In 8.2, they are both (vmlinuz and initrd) in /boot, thus i would have expected to find it in /home/old/boot but initrd was not there. If you have the 7.1 OS mounted there has to be an entry in the /etc/fstab file of LM8.2 to get it mounted. This file is read at boot time and provided the stanza to mount it is correct you will have a mounted 7.1 OS to go rummage around. I suspect that you don't have a mounted 7.1 OS in LM8.2. though I may be wrong. snip I had created other issues while doing package updates. So i decided to reload 8.2. As i had tarballs of both /home and /root of 7.1, i also decided to repartition and reload it back on to the old 4Gig drive. Loaded it with all docs this time and LILO instead of grub. I had a working stanza for lilo.conf then to import into 8.2. The vga=788 line was causing more greif, it turned out to be unsupported under 7.1. Reinstalled 8.2 (treating package updates gingerly this time, one at a time and not trying to update ghostscript as it locked up X). With all the docs loaded on 7.1 i got konq to do another search for initrd*. Found a kernal doc that was very informative. As Bascule said in the first place initrd is/was entirely optional and it seems under 7.1 it was left to the user to implement if they chose. It is a ram disk image that has various commands preloaded into it that are used during the boot cycle, then dumped - that is if i read it correctly. Anyway copied my vmlinuz-blah-blah across. Installed 7.1' lilo stanza in 8.2 lilo.conf. Typed lilo as su and it is away. Still could not completely recover netscape mail even after installing the /home tarball, but that is another issue... i know what to do next with that. I am a happy chappy and i can go back to my security updates et al now knowing that i have learned something. Thanks Bascule, and thanks for trying John. Michael Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] why fsck is not automatic ?
On Saturday 11 May 2002 05:48 am, Pupeno wrote: Why when I have a system crash, a partition not umounted, the fsck is not automatic and I have to press Y to make it happen ? How can I configure the old way, automatic fsck when filesystem not umounted ? And BTW how can I schedule an fsck to the next reboot ? Thank you. Sounds like you need to read up on the Magic SysRq key. Synchronising your disks helps. BTW often nothing apears to be happening till 3/4 of the way through the sequence. http://www.linux-mandrake.com/en/doc/82/en/ref.html/ts-system-freeze.html Remembering the Sequence Entirely Is Useful Buddy Michael Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] semi OT redhat battles the evil empire?
11 2002 07:31, / shane : Shane firts of all hello Can you please post more details about it? Never heard about something like it. You mean a Linux Distro stands against others? I've thought that recently RedHat changed perspective and aimed mostly at server market. Regards Dimitris ok, saw an article on this, was shocked, forgot about it. went to the store tonight. saw it again. now i am just confused. redhat is currently offering a rebate if you are changing over from another OS. cool you say more reason to leave windows! if only redhats rebate goes to users of mandrake and suse. i have often said that there are a few beginer or desktop only distros like redmond but only 2 complete distros, mandrake and suse. does this mean redhat agrees? -- # Registered Linux User 271321 This message was sent from a Microsoft_Free PC. # Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] semi OT redhat battles the evil empire?
On Fri, 10 May 2002 21:31:58 -0700 shane [EMAIL PROTECTED] wrote: ok, saw an article on this, was shocked, forgot about it. went to the store tonight. saw it again. now i am just confused. redhat is currently offering a rebate if you are changing over from another OS. cool you say more reason to leave windows! if only redhats rebate goes to users of mandrake and suse. i have often said that there are a few beginer or desktop only distros like redmond but only 2 complete distros, mandrake and suse. does this mean redhat agrees? hmm.. actually i woudn't worry about that.. they will find out this atrategy will not make a lot of ppl change from suse/mdk to redhat. IMHO Linux users tend to be very satisfied with their choices, simply beacuse we CAN choose, and try a lot of things. a rebate is not enough to change a mandrake/suse user's mind, unless he/she had a very bad experience with it. Now, for Windoze users... that's another deal. in their case it might work. /IMHO we all know RH is a more traditional company, so to speak.. so it's not very surprising that they start using a more agressive advertising strategy... . and on the other hand, it does hurt a little.. Damian Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com