: [AFMUG] List updates
Rule 1: Don't change anything major on Friday, unless you like working
Saturday. And Sunday.
Rule 2: Don't change anything major on Monday. It's Monday.
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Paul McCall via Af
Sent: Friday, January 2, 2015 9:22 AM
To: af
Guys,
We had a glitch switching over to normal headers with Amazon. We are putting
it back the way it was while we work through this with Amazon.
We will provide updates as we work through it.
Thank you for your patience
Paul McCall, Pres.
PDMNet / Florida Broadband
658 Old Dixie Highway
Friday is the day that we have scheduled to actually flip the switch to
running off the different header format. Sorry if that was confusing.
Step 1 - get as many people pre-Amazon Authorized as possible. We sent out the
Amazon Verification email yesterday. My understanding is that it is
Well..
As you all probably are aware, PDMNet has been managing the AFMUG list for
Chuck and we have been using Amazon to do it. There were some bumps to get it
off the ground as Amazon has VERY specific/strict methods that have to be
adhered to in order to send email through their
¿½ï¿½ ☺
�
===
Curtis Brotherton
PDMNet
(772) 564-6800
�
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Paul McCall via Af
Sent: Tuesday, December 30, 2014 10:55 AM
To: af@afmug.commailto:af@afmug.com
Subject: [AFMUG] Adjustments to the AFMUG lists / Amazon
�
Well��
ï
that restores the headers to display the
actual person and email address of the sender (which also fixes the threading)
☺
===
Curtis Brotherton
PDMNet
(772) 564-6800tel:%28772%29%20564-6800
From: Af [mailto:af-boun...@afmug.commailto:af-boun...@afmug.com] On Behalf
Of Paul McCall
Yes, slowly, on purpose.
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Simon Westlake via Af
Sent: Tuesday, December 30, 2014 1:49 PM
To: af@afmug.com
Subject: Re: [AFMUG] Adjustments to the AFMUG lists / Amazon
I got mine literally 30 seconds ago, I think they are going out slowly.
On
Maybe ☺
From: Af [mailto:af-boun...@afmug.com] On Behalf Of That One Guy via Af
Sent: Tuesday, December 30, 2014 3:13 AM
To: af@afmug.com
Subject: [AFMUG] is the list going to get fixed?
a yes or a no
--
All parts should go together without forcing. You must remember that the parts
you are
Merry Christmas everyone! I pray that you and your family have a blessed day,
creating memories!
Paul
Paul McCall, Pres.
PDMNet / Florida Broadband
658 Old Dixie Highway
Vero Beach, FL 32962
772-564-6800 office
772-473-0352 cell
www.pdmnet.comhttp://www.pdmnet.com/
We have blocked 1900 UDP for many years and never have “seen” any side affects
from that
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Mark Radabaugh via Af
Sent: Tuesday, December 23, 2014 11:44 AM
To: af@afmug.com
Subject: Re: [AFMUG] North Korea is down
UDP 1900 is ephemeral port,
Need to work with a good Motorola 2 Way dealer. STAT !
Need some intelligence and need to buy some stuff
Paul McCall, Pres.
PDMNet / Florida Broadband
658 Old Dixie Highway
Vero Beach, FL 32962
772-564-6800 office
772-473-0352 cell
www.pdmnet.comhttp://www.pdmnet.com/
No, they fixed it
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Josh Luthman via Af
Sent: Friday, December 12, 2014 11:15 AM
To: af@afmug.com
Subject: Re: [AFMUG] ePMP Release 2.3.3 available now
Are you saying that bug still exists in 2.3.3 from 2.3.1 (accessing the radio
from a
Please reply OFFLIST
Special contest === Every Purchase made by Christmas eve, 2014 gets one
entry into a drawing for a $ 250 Credit for PDMNet’s Repair Services, including
Motorola, Cambium, Gemtek and Ubiquiti equipment. Drawing winner to be
announced on December 29,
on different hardware
Not that I have ever heard of.
They still sell new routers. why not just buy a new Imagestream to handle what
you are doing?
Also don't be afraid of radius...it's pretty mature and solid.
All of our routers are Imagestream
On Wednesday, December 3, 2014, Paul McCall via Af
af
We have been running Imagestream Rebel GE (latest REV) at the core for a while
now, and been problem free. IS because we run Azotel (without Radius) and IS
runs Azotel's WIB (control software).
We are adding more BW (Gig connections) and fear that the IS router might not
be able to handle the
I thought I heard it was 2degree downtilt
From: Af [mailto:af-boun...@afmug.com] On Behalf Of CBB - Jay Fuller via Af
Sent: Tuesday, December 02, 2014 11:22 AM
To: af@afmug.com
Subject: Re: [AFMUG] epmp - multi site
Gotcha. Notice they all came with gps receiversis there any built in
on the 2.4 sector? Can't find it listed
anywhere.
On Tue, Dec 2, 2014 at 3:57 PM, Paul McCall via Af
af@afmug.commailto:af@afmug.com wrote:
I thought I heard it was 2degree downtilt
From: Af [mailto:af-boun...@afmug.commailto:af-boun...@afmug.com] On Behalf
Of CBB - Jay Fuller via Af
Sent: Tuesday
Skype: danieldwhite
daniel.wh...@saftehnika.commailto:daniel.wh...@saftehnika.com
-Original Message-
From: Af [mailto:af-boun...@afmug.commailto:af-boun...@afmug.com] On Behalf
Of Paul McCall via Af
Sent: Monday, December 1, 2014 3:08 PM
To: af@afmug.commailto:af@afmug.com
Subject
We have an SAF Lumina with the Hybrid Interface on it. Optical and Electrcial.
Our fiber going to the radio got eaten by a big bird. Not THE Big Bird, but A
big bird :)
Anyway, can we actually use the EL (copper) interface to pass data? I have
emailed SAF this AM and not gotten an answer
watts+
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Mon, Dec 1, 2014 at 11:07 AM, Paul McCall via Af
af@afmug.commailto:af@afmug.com wrote:
We have an SAF Lumina with the Hybrid Interface on it. Optical and Electrcial.
Our fiber going
] SAF Hybrid interface question
Do you have their fancy POEs? I'm not sure if it does typical POE as the unit
is 35 watts+
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Mon, Dec 1, 2014 at 11:07 AM, Paul McCall via Af
af@afmug.commailto:af
Yeah, we plugged in copper, made the change in radio. All is good. We don’t
do POE at all on this. This was pre-terminated fiber and we will replace
fiber in a few days.
Paul
-Original Message-
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Seth Mattinen via Af
Sent: Monday,
at 3:07 PM, Paul McCall via Af
af@afmug.commailto:af@afmug.com wrote:
Yeah, we plugged in copper, made the change in radio. All is good. We don’t
do POE at all on this. This was pre-terminated fiber and we will replace
fiber in a few days.
Paul
-Original Message-
From: Af [mailto:af
Please reply OFFLIST
Special contest === Every Purchase made by close of business Monday
December 1, 2014 gets one entry into a drawing for a $ 250 Credit for PDMNet’s
Repair Services, including Motorola, Cambium, Gemtek and Ubiquiti equipment.
Drawing winner to be announced
modulation should be just fine during heavy rain
events.
We have a 30 mile 11ghz shot in CO and it's never dropped during a rain event.
And we had some massive downpours that dropped a couple inches of rain in less
than an hour.
On Monday, November 24, 2014, Paul McCall via Af
af@afmug.commailto:af
Anyone using these yet?PTP450 in 3.65Ghz What kind of BW and what
distance are you seeing with what antennas?
Paul
Paul McCall, Pres.
PDMNet / Florida Broadband
658 Old Dixie Highway
Vero Beach, FL 32962
772-564-6800 office
772-473-0352 cell
www.pdmnet.comhttp://www.pdmnet.com/
the cambium link planner to run paths for distances and dish sizes.
They are 120mbps aggregate links (as long as you are running in 8x and 20mhz
channel size)
On Tuesday, November 25, 2014, Paul McCall via Af
af@afmug.commailto:af@afmug.com wrote:
Anyone using these yet?PTP450 in 3.65Ghz What
Cambium,
Can you please make a suggestion as to what equipment that you recommend to us
for this type of problem/solution?
Paul
-Original Message-
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Paul McCall via Af
Sent: Saturday, November 22, 2014 12:32 PM
To: af@afmug.com
Subject
F12berlinetta. they are both
cars that drive on roads but that's about where the similarities end. same
thing with backhauls.
2 cents
-sean
On Mon, Nov 24, 2014 at 7:48 AM, Paul McCall via Af
af@afmug.commailto:af@afmug.com wrote:
Cambium,
Can you please make a suggestion as to what
For Cambium we have a very remote tower that feeds several other towers.
Everything is OSPF but logically...
Tower R (the main remote tower - a 190 ft. Rohn 25G with several anti-twist
devices) is fed by...
Tower A - 26 miles away - UBNT 3.65ghz Rocket M5 AND a Mikrotik RB912 5
take
sync from a different source, like a CMM4.
Jeff Broadwick
ConVergence Technologies, Inc.
312-205-2519 Office
574-220-7826 Cell
jbroadw...@converge-tech.commailto:jbroadw...@converge-tech.com
On Nov 22, 2014, at 12:31 PM, Paul McCall via Af
af@afmug.commailto:af@afmug.com wrote:
For Cambium
We have 3 Crown Castle towers that we have had since 2003. Started around $
500 per month for 4 sectors and 2 BHs back then. Rent escalations plus now
having 6 sectors on it now, have brought the rent up to around $ 1000/month.
We are exploring our other options for new towers.
Two of the
Matt,
There are actually lots of little chips around the CPU area that can cause this
and a couple other parts that can as well.
We actually have a proprietary workaround that works pretty universally to fix
this, but I cant share that secret :) it involve no component swaps.
Paul
Worked fine for me... questioning the gateway aspect as well... either it
assumes a gateway based on IP and mask OR its using the public Gateway to get
home
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Wireless Admin via Af
Sent: Wednesday, November 12, 2014 3:12 PM
To: af@afmug.com
We have 2.3 on one tower because we needed 10 Mhz channels. No problems that
we have noticed
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Rex-List Account via Af
Sent: Monday, November 03, 2014 8:24 AM
To: af@afmug.com
Subject: Re: [AFMUG] ePMP Software 2.3
I have it installed on a test
Anybody have a crafty marketing letter / card for trying to sell your service
as a redundant connection for those that already have DSL / Cable?
Paul McCall, Pres.
PDMNet / Florida Broadband
658 Old Dixie Highway
Vero Beach, FL 32962
772-564-6800 office
772-473-0352 cell
, Paul McCall via Af
af@afmug.commailto:af@afmug.com wrote:
I know of ITElite – do they actually work well? Are there other options?
Paul
From: Af [mailto:af-boun...@afmug.commailto:af-boun...@afmug.com] On Behalf
Of Paul McCall via Af
Sent: Monday, November 03, 2014 3:41 PM
To: af
be nice too, but at least I can just use a whole
stack of them to get around that.
From: Af [af-boun...@afmug.commailto:af-boun...@afmug.com] on behalf of Paul
McCall via Af [af@afmug.commailto:af@afmug.com]
Sent: Wednesday, October 29, 2014 9:26 PM
To: af
All good TJ ?
From: Af [mailto:af-boun...@afmug.com] On Behalf Of TJ Trout via Af
Sent: Thursday, October 30, 2014 3:13 PM
To: af@afmug.com
Subject: Re: [AFMUG] Testing 123
Test 1213
On Oct 30, 2014 12:11 PM, TJ Trout t...@voltbb.commailto:t...@voltbb.com
wrote:
Test 1211pm
On Oct 29, 2014
+1
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Mike Hammett via Af
Sent: Wednesday, October 29, 2014 8:31 AM
To: af@afmug.com
Subject: Re: [AFMUG] ePMP feature
The sooner the better!
-
Mike Hammett
Intelligent Computing Solutions
http://www.ics-il.com
Is anyone using a 3rd party company to call your customers on your behalf,
primarily in the area of upsells of service or routers? We have been pushing
the Mikrotik routers to each customer prem and its really helping us a LOT to
solve or at least see the customers internal issues (what device
Yes, probably 95% of working numbers.
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Ken Hohhof via Af
Sent: Sunday, October 26, 2014 5:57 PM
To: af@afmug.com
Subject: Re: [AFMUG] Using outside reps or service to call customers?
You have working phone numbers for your customers? That alone
: [AFMUG] WTB: Rohn 65, 55 or similar towers
We have bought lots of used tower from ham radio guys, they dont usually go
above 45g though but you might find something.
On Oct 24, 2014 10:56 PM, Paul McCall via Af
af@afmug.commailto:af@afmug.com wrote:
I have a need to build 4 80 ft. and 2 60 ft
I have a need to build 4 80 ft. and 2 60 ft. un-guyed towers on the cheap .
I was thinking of some used 65G tower pieces that I can easily do 80 feet
unguyed. Not seeing much out there that is reasonable. I emailed several
companies that I found on google but no one seemed to have stock (on
Anybody using these yet? Results?
Paul McCall, Pres.
PDMNet / Florida Broadband
658 Old Dixie Highway
Vero Beach, FL 32962
772-564-6800 office
772-473-0352 cell
www.pdmnet.comhttp://www.pdmnet.com/
pa...@pdmnet.netmailto:pa...@pdmnet.net
We have done a 50+ unit ePMP forklift yesterday/today and are having some
issues right at the edge of the 90 degree sector coverage. We have the sectors
installed at 0,90,180, 270 degrees - very precisely - we had great landmarks
to use for a guide at each degree)
(week signals right at
strength.
Mark
On 10/22/14, 12:27 PM, Paul McCall via Af wrote:
I want to make sure we are on the same page. Not asking about the PMP450 3.65
I am asking about the PTP450 3.65
-Original Message-
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Mark Radabaugh via Af
Sent: Wednesday
We did a 50+ ePMP customer swapout the past two days and had some customers
that were borderline. We were using Brand X dishes for most of the swapouts
with pretty good results. We have a few links that were not about -76 to -78
and decided to try Beehive Manufacturing's bigger dish with the
:23 PM, Paul McCall via Af af@afmug.com wrote:
We did a 50+ ePMP customer swapout the past two days and had some
customers that were borderline. We were using “Brand X” dishes for
most of the swapouts with pretty good results. We have a few links
that were not about
-76 to -78 and decided
, October 22, 2014 5:18 PM
To: af@afmug.com
Subject: Re: [AFMUG] Kudus to Chuck and Beehive ePMP dishes
On Wed, Oct 22, 2014 at 4:11 PM, Paul McCall via Af af@afmug.com wrote:
Yes, we have forklifted 5 or 6 towers now from a Canopy 100 series 2.4. In
general, we have been happy
better in a
low-noise environment because the frames are pretty large.
However, if there is a lot of interference, I would expect the PMP450 to get
better because it can fit a bunch of ATM-like frames in between bits of
interference.
bp
On 10/22/2014 2:24 PM, Paul McCall via Af wrote:
I have
Nate... send to me... my admin is out , so it might be a couple hours
-Original Message-
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Nate Burke via Af
Sent: Tuesday, October 21, 2014 10:03 AM
To: Animal Farm
Subject: [AFMUG] List Admin
Who do we talk to about some Technical
Craig,
We have a bunch of the 5.2 APs P9 in the warehouse if you need any.
Paul, PDMNet
772-564-6800
-Original Message-
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Craig House via Af
Sent: Friday, October 17, 2014 11:22 PM
To: af@afmug.com
Subject: [AFMUG] DFS issues
We are
Kurt,
I have some comments inline.
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Kurt Fankhauser via Af
Sent: Saturday, October 18, 2014 2:20 AM
To: af@afmug.com
Subject: Re: [AFMUG] Pmp450 vs epmp pros vs cons
I started the spring deploying 450 in 2.4ghz, 5ghz, and 3.65ghz and then
We don’t have that exact scenario, but you could monitor or throttle through a
router (Mikrotik) or use the SM QOS to help mitigate that (somewhat)
-Original Message-
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Travis Johnson via Af
Sent: Wednesday, October 15, 2014 4:14 PM
To:
We have upgraded a bunch of towers to ePMP (2.4) are finding we are going to
really be more exacting with our downtilts to avoid spectrum overlap... more
than we did with 100 series, because of the SNR requirements. I assume 2.4 450
would have similar requirements.
So, I want to map out my
Adam,
That’s what I was thinking also. That would be handy
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Adam Moffett via Af
Sent: Tuesday, October 14, 2014 11:20 AM
To: af@afmug.com
Subject: Re: [AFMUG] Downtilt tool
That's the method I've generally used. You can further calculate
** PLEASE REPLY OFFLIST
We have 150 P10 2400SMs, recently pulled from working service from PDMNet's
network - $ 75 each (minimum qty 10). OR best offer on the whole lot.
We also have about 20 P10 2450APs (stock - integrated) and about 25 P10 2450APs
- $ 350 each (minimum qty 3) OR
Jeremy,
I am glad this worked out well for you financially. Most people have been very
unhappy with the effect of this, and in then we ALL pay for any costs that are
lowered, subsidized etc. Financially for this country as a whole, today and
in the future, Obamacare is a disaster. There is
+1
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Rory Conaway via Af
Sent: Thursday, October 09, 2014 4:54 PM
To: af@afmug.com
Subject: Re: [AFMUG] ObamaCare
It can’t if it’s constantly chipped apart from the bottom up. Between
continued growth of the welfare state, unchecked immigration
My personal went up 60%
From: Af [mailto:af-boun...@afmug.com] On Behalf Of James Howard via Af
Sent: Wednesday, October 08, 2014 12:01 PM
To: af@afmug.com
Subject: Re: [AFMUG] ObamaCare
Only 10%?! I was talking to an insurance agent. He said that on the personal
policies they didn't see
all CPE's to Epmp
then change AP to Epmp that is what wifi mode is for
—
Sent from Mailboxhttps://www.dropbox.com/mailbox
On Wed, Oct 8, 2014 at 10:29 PM, Paul McCall via Af
af@afmug.commailto:af@afmug.com wrote:
What is the perceived application for the SM operating in standard WiFi mode
injectors definitely add some signal loss due to the Ethernet
magnetics in the path. At least a couple dB.
I've also noticed that certain surge suppressors are even more picky with the
gigabit injectors. Not sure why.
On Oct 7, 2014 2:30 PM, Paul McCall via Af
af@afmug.commailto:af@afmug.com wrote
Did it
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Matt Mangriotis via Af
Sent: Monday, October 06, 2014 10:57 AM
To: af@afmug.com
Subject: [AFMUG] 900 MHz Survey - Request for Info
As some of you may already be aware, we are conducting some inquiries
surrounding the 900 MHz band in
+1
-Original Message-
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Matt via Af
Sent: Monday, October 06, 2014 11:21 AM
To: af@afmug.com
Subject: Re: [AFMUG] PacketFlux Product Ideas
Rack mount 24 port sync over power injector. Possibly with surge protection.
On Sun, Oct 5, 2014
Or even 450 throughput
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Chuck McCown via Af
Sent: Monday, October 06, 2014 2:25 PM
To: af@afmug.com
Subject: Re: [AFMUG] 900 MHz Survey - Request for Info
How about one wide channel that takes up the whole band. Then you could get
430 type of
I have to hook up a CMM to a tower that already has a CMM on it, like today.
There is a timing 6 pin connector on the CMM. Can that be used to bridge the
sync to the 2nd CMM? If so, how would that be wired, and what setting would I
make in the CMM(s) so that it would know to use it
Paul
and one GPS antenna ??
IIRC, it needs to be a roll-over cable. Pin 1 to 6 and 2 to 3. 2 3 if you
care about the GPS data, otherwise just 1 to 6 and 6 to 1.
On 10/6/2014 3:48 PM, Paul McCall via Af wrote:
I have to hook up a CMM to a tower that already has a CMM on it, like
today.�ï
PM, Paul McCall via Af
af@afmug.commailto:af@afmug.com wrote:
I have to hook up a CMM to a tower that already has a CMM on it, like today.
There is a “timing” 6 pin connector on the CMM. Can that be used to bridge the
sync to the 2nd CMM? If so, how would that be wired, and what setting would
Even a 12+4 would be great
From: Af [mailto:af-boun...@afmug.com] On Behalf Of timothy steele via Af
Sent: Monday, October 06, 2014 9:36 PM
To: af@afmug.com
Cc: af@afmug.com
Subject: Re: [AFMUG] PacketFlux Product Ideas
A sync injecter with 28 ports 24 sync injected ports + 4 POE ports for BH's
We are thinking of raising our prices on our residential basic plan. Some of
our customers have been on the same priced plan for 7 years (or more). Around
$ 45 / month for up to 5Mbit/1Mbit. Probably 25% of those customers, we are
the only good source for Internet. The rest have varying
Very good input from all of you!
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Ken Hohhof via Af
Sent: Saturday, October 04, 2014 4:32 PM
To: af@afmug.com
Subject: Re: [AFMUG] How frequently have you had a price increase?
Everyone seems to expect our prices will go down, it’s the Internet
On Oct 4, 2014, at 4:54 PM, Paul McCall via Af
af@afmug.commailto:af@afmug.com wrote:
Very good input from all of you!
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Ken Hohhof via Af
Sent: Saturday, October 04, 2014 4:32 PM
To: af@afmug.commailto:af@afmug.com
Subject: Re: [AFMUG] How
I think a couple of us has mentioned SimpleDNS – 2 minute install – just works ☺
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Josh Baird via Af
Sent: Friday, October 03, 2014 9:47 AM
To: af@afmug.com
Subject: Re: [AFMUG] DNS server for guys who dont want to be gurus
Yeah. RHEL/CentOS
, Oct 3, 2014 at 8:56 AM, Paul McCall via Af
af@afmug.commailto:af@afmug.com wrote:
I think a couple of us has mentioned SimpleDNS – 2 minute install – just works ☺
From: Af [mailto:af-boun...@afmug.commailto:af-boun...@afmug.com] On Behalf
Of Josh Baird via Af
Sent: Friday, October 03, 2014 9:47
Rory,
Can you define better filtering from a practical perspective?
What frequency have you compared, 450 to ePMP? With interference or something?
The reason I ask that is we are taking down 2.4 PMP100 and replacing a lot of
those with ePMP, which is working well except where we have a 2.4
SimpleDNS works great - 5+ years no issues -- SIMPLE
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Sean Heskett via Af
Sent: Thursday, October 02, 2014 1:27 PM
To: af@afmug.com
Subject: Re: [AFMUG] DNS server for guys who dont want to be gurus
BIND is your friend.
i'd also set iptables
of each email in the from line, or is
that a separate matter entirely?
On Mon, Sep 29, 2014 at 8:20 PM, Paul McCall via Af
af@afmug.commailto:af@afmug.com wrote:
Guys,
As some of you are aware, PDMNet’s behind the scenes management of the AFMUG
list as a service to Chuck McCown and his
A couple years ago (like maybe 2010??) , the FCC issued a clarifying document
about the rights of a homeowner vs. the rights of a deed restricted area.
Something to the effect of it's legal to enact guidelines for visual esthetic
reasons at a property, such as shielding from view from the
: Af [mailto:af-boun...@afmug.com] On Behalf Of Paul McCall via Af
Sent: Tuesday, September 30, 2014 9:08 AM
To: af@afmug.commailto:af@afmug.com
Subject: [AFMUG] Legal FCC document about deed restrictions and antennas
A couple years ago (like maybe 2010??) , the FCC issued a clarifying document
about
Wireless, Monitor should show you that.
Tools, eDetect will show you the signal strength of anything on the channel by
MAC only. Might help you get close… ePMP MACs start with 00:04.
From: Af [mailto:af-bounces+paulm=pdmnet@afmug.com] On Behalf Of Mike
Hammett via Af
Sent: Monday,
Is there an easy way to power up (and run) a PTP250 other than the built in
power supply ? I don't mind getting creative if need be.
Paul
Paul McCall, Pres.
PDMNet / Florida Broadband
658 Old Dixie Highway
Vero Beach, FL 32962
772-564-6800 office
772-473-0352 cell
or just reply to the
authentication(s)?
bp
On 9/29/2014 6:20 PM, Paul McCall via Af wrote:
Guys,
As some of you are aware, PDMNet's behind the scenes management of the AFMUG
list as a service to Chuck McCown and his companies, involves hosting on an
Amazon server. Some very good things have come
Subject: Re: [AFMUG] AFMUG list option being considered
What will we need to do? Unsubscribe/resubscribe or just reply to the
authentication(s)?
bp
On 9/29/2014 6:20 PM, Paul McCall via Af wrote:
Guys,
As some of you are aware, PDMNet's behind the scenes management of the AFMUG
list
Prince via Af
Sent: Monday, September 29, 2014 9:34 PM
To: af@afmug.commailto:af@afmug.com
Subject: Re: [AFMUG] AFMUG list option being considered
What will we need to do? Unsubscribe/resubscribe or just reply to the
authentication(s)?
bp
On 9/29/2014 6:20 PM, Paul McCall via Af wrote:
Guys
Ken,
If that part was damaged (and then removed on purpose) there could be damage to
the Ethernet Transceiver itself or a few of the other parts that support the
transceiver. Obviously, send it back. For grins, you might try setting your
computer interface to 10Mbit just to see what it does
@afmug.com] On Behalf Of Paul
McCall via Af
Sent: Saturday, September 27, 2014 9:28 PM
To: af@afmug.commailto:af@afmug.com
Subject: Re: [AFMUG] OT Friday Fun
For you Chuck... attempting to attach an .m4a file for you
From: Af [af-bounces+paulm=pdmnet@afmug.com
Ken,
We run 906, 915, 924 on all towers except one. That one has 924 plastered with
signal all around it, for 7 years like that.
On that tower, we do run 906, 914, 922 and it has been running that way since
2007
-Original Message-
From: Af
Double C’s are part of my daily warm-up Chuck.
But, there are some guys that are just amazing… Doc being on my short list of
trumpet players in that list… Maynard Ferguson and Harry James are the other
biggies.
Glad that you got to hear Doc !
From: Af
Yes, that one… I just did my warmups for tonight and recorded it for you on
my Mac with Quicktime, but I don’t think the MIME attachment type allows for
attachments to the list. If not, I will send it to your personal
I will try that later … headed out the door for the gig!
From: Af
I would say that is likely Jeremy.
From: Af [mailto:af-bounces+paulm=pdmnet@afmug.com] On Behalf Of Jeremy
Grip via Af
Sent: Saturday, September 27, 2014 8:18 PM
To: af@afmug.com
Subject: [AFMUG] PMP450 in 3.55?
I notice looking at PMP450 specs that there are two separate units in 3GHz, one
For you Chuck... attempting to attach an .m4a file for you
From: Af [af-bounces+paulm=pdmnet@afmug.com] on behalf of Jeremy Grip via
Af [af@afmug.com]
Sent: Saturday, September 27, 2014 8:06 PM
To: af@afmug.com
Subject: Re: [AFMUG] OT Friday Fun
MF! MF! MF!
Gerard is correct. An SM will function without it, though it makes the
Ethernet less than protected from basic transient surges (even little ones).
I would suggest replacing it
From: Af [mailto:af-bounces+paulm=pdmnet@afmug.com] On Behalf Of Gerard
Dupont III via Af
Sent: Saturday,
Could be that when the part came off, a trace went with it
From: Af [mailto:af-bounces+paulm=pdmnet@afmug.com] On Behalf Of Ken Hohhof
via Af
Sent: Saturday, September 27, 2014 11:07 PM
To: af@afmug.com
Subject: Re: [AFMUG] missing part on Canopy SM
So the missing part doesn’t explain why
Yeah, my question was just about the stand-offs only
From: Af [mailto:af-bounces+paulm=pdmnet@afmug.com] On Behalf Of Peter
Kranz via Af
Sent: Friday, September 26, 2014 2:28 PM
To: af@afmug.com
Subject: Re: [AFMUG] Standoff question, rule of thumb, etc.
have at least 3 ft of vertical
I met Doc a couple years ago at a music conference He still plays regularly,
has a beautiful, much younger wife and is still quite the character !
[https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-xfa1/t31.0-8/p417x417/471835_3947161194611_1355780645_o.jpg]
From: Af
Over the years we have employed different philosophies on mounting sectors to
towers. Our reference point was the Moto 100 series connectorized radios with
sectors. We started out with 18 standoffs on a Rohn 25G tower, because some
smart guy suggested that was what we needed. Another smart
We had one like that Craig. 26.9 miles - 5700BH20 - started with P8s in 2003.
later upgraded to P10s on 2011, recently upgrade to something else.
It was at 310 ft at one end and 260 ft at the other. VERY strong link... -62
and never any problems. Oh, the good ol' days
-Original
Yeah, I love all the Mikrotik “tricks” to accomplish these type things, but
sometimes I struggle at always being successful.
In this case, telneting directly from the tik takes about one minute (OK, two
if you take your time) and then you are done
From: Af
AP cost ?
-Original Message-
From: Af [mailto:af-bounces+paulm=pdmnet@afmug.com] On Behalf Of Matt
Jenkins via Af
Sent: Saturday, September 20, 2014 8:44 PM
To: af@afmug.com
Subject: Re: [AFMUG] TVWS Alive or Dead? Was: Re: Dear Cambium
I think its 350 each + Antenna.
Matthew
1 - 100 of 114 matches
Mail list logo
