omega;211937 Wrote:
Have you tried to listen , seanadams?
Yes, I'm listening right now and I don't hear a problem. I've been
listening for years, and so have thousands of others.
PLEASE give this i try, It´s not placebo!
PLEASE give this i try, It´s not placebo!
PLEASE give this
I'm one of those open minded people that will give things a go before
passing comment
to set the picture ..I have an unmodded sb3 feeding either an src2496
upsampler or a quad99cdp [as dac]
I have not heard your fault ..though I can understand the frustration
if thats what your
there seems to be a downer on RA .I can't understand why as there
are many other people doing far worse than makeing slightly over the
odds on there products.
All the RA gear I've heared worked just like it says on the tin..
There service and return policy are very good too [I've not had
this is my write upof the xdac v3 mods ...I've now do six of these units
following these basic guidelines.
MF x dacv3 mods
The aim was to try and improve the unit but on a strictly limited
budget of about £50 for parts. The unit on initial listen sounded thin,
closed in and a little
try using a test disc ...like the ones from Chesky Records Jazz Sampler
Audiophile Test Compact Disc - Volume 1
this can be dropped onto the puter and you can use the varios tracks to
find your best seating position.
I'd start by sitting at the piont of an equilateral triangle with the
Could something about wireless and buffering be a source of problem? Is
your SB wireless or wired?
--
vrobin
vrobin's Profile: http://forums.slimdevices.com/member.php?userid=11705
View this thread:
omega;211937 Wrote:
Later today i will try to Downgrade the SB3 to see if there is a problem
in firmware / Slimserver.
Oh, Lord, here we go again :) Didn't Sean already post the definitive
reply to this one?
--
AndyC_772
Hi again!
I Have tried both wireless and wired, The result is the same.
But if i change the volume from Fixed to Adjustable in player
settings, Then the PAUSE Fix don´t work. (We are not able to hear any
differance)
But Fixed Volume setting sounds way better than Adjustable so
that´s not an
since we're kind of on the subject of power supplies, can anyone tell me
if a power supply with a 1.5amp rating would work as well as one with a
3amp rating. i've been trying to find a 12v regulated 3amp supply but
have only come across 1.5amp ones. also, if anyone could point me in
the
zanash;211943 Wrote:
I'm one of those open minded people that will give things a go before
passing comment
Me too, and I wish Omega were open minded enough to consider the
possibility that his mind is involved in the hearing process. I think
he should give that theory a go before
My unit is wireless .
as to the rest I know very little
but its odd to have a similar issue ?
--
zanash
zanash's Profile: http://forums.slimdevices.com/member.php?userid=12157
View this thread:
Hi Again!
seanadams, you say you can´t hear The effect
What Stereo gear did you use during the test? External DAC ? and fixed
output in player setting, Stream Flac as Wave etc?
How many tracks did you test ? For how long did you test?, Had you
allready make up your mind?
What Speakers etc ?
After fairly extensive research, I also went with the lavry da10 for my
SB3.
Although to be honest, I haven't done any significant A:B listening
tests to really appreciate the unit
--
mmg_fan
mmg_fan's Profile:
I don't know the truth or placebo part of this thread, but... damn,
reading you really scare me! Wether you're a troller, a placebo victim
or a real good ear... please, take it easy! :)
--
vrobin
vrobin's Profile:
omega;212012 Wrote:
seanadams, do you have measure equipment ?
LOL! Do you think Sean might have had some measure equipment *when he
invented* the Slimp3 and the SB?
This can´t realy be a Placebo thing Both of us can hear this cleary and
my girfriend to.
Looking forward to hearing the
Lavry here too... awesome sound and reasonable price for the
performance. I paid $975.00 free shipping.
--
ErikM
ErikM's Profile: http://forums.slimdevices.com/member.php?userid=7576
View this thread:
zanash;211945 Wrote:
there seems to be a downer on RA .I can't understand why as there
are many other people doing far worse than makeing slightly over the
odds on there products.
All the RA gear I've heared worked just like it says on the tin..
There service and return policy are
Zanash - I'm quite interested in your mods. Which do you think made the
biggest difference? I use a stock X-DACv3+X-PSU but with homemade
silver/ptfe cables.
I might try damping the case as a zero-cost tweak. After that, what are
the must-do changes?
Regards
Phil
--
Phil Leigh
You want to see
Look for an older Nakamichi. They had a great power amp section designed
by Nelson Pass, TA3A, or the TA4A
--
ErikM
ErikM's Profile: http://forums.slimdevices.com/member.php?userid=7576
View this thread:
I tried this and couldn't hear any difference with either my
Transporter, SB2, or SB3. My music collection is stored in Apple
Lossless, but I convert to WAV in Slimserver before sending to the
TP/SB. In all cases, I'm using a wireless connection. Using a Dodson
DA-218 DAC with the Transporter,
ErikM;212034 Wrote:
Look for an older Nakamichi. They had a great power amp section designed
by Nelson Pass, TA3A, or the TA4A
You mean like an RE-2 or RE-3 Nakamichi?
--
parfour7th
parfour7th's Profile:
Hi Phil Leigh,
Do you have Fixed Volume Setting And no auto gain settings?
Optical or Coaxial output ?
Stream Wave as Flac?
How long / Many recordings did you test?
What server / Firmware Version ?
Sweetspot listening etc?
Just came home from the office,
Tested again, a can clearly hear
omega;212050 Wrote:
If i listen to a hole record the good sound is there all the time.
So the fix is only needed when jumping between tracks
How have you configured ReplayGain?
--
snarlydwarf
snarlydwarf's
Omega,
Yes I have digital volume fixed (and analogue volume at 63 - i.e.
off!), no auto gain and I stream FLAC (as I can hear NO difference
streaming WAV or FLAC). Digital o/op is coax into TACT RCS 2.2x (and
then Altmann JISCO+UPCI into MR X-DACv3 - all coax...)
I tried it 4 or 5 times with a
This is me and Hammers Player Audio Settings:
Turn OFF Audio:Outputs always on
Crossfade:None
Crossfade Duration:0
Digital Volume Control:Digital output level is Fixed
Preamp Volume Control:0
Audio Startup time:0
Bitrate limiting:No Limit
Volume Adjustment/Replay Gain:Disable Volume Adjustment.
Omega - try it with Preamp Volume Control = 63 (ie the analogue stages
are turned off) - does it still work?
--
Phil Leigh
You want to see the signal path BEFORE it gets onto a CD/vinyl...it
ain't what you'd call minimal...
...SB3+TACT+Altmann+MF DACXV3/Linn tri-amped Aktiv 5.1 system and
Hi Agian Phil Leigh!
Thanks for giving this a try! :-)
Can you test one more thing?
If you have a Optical cable, Try the Optical Out from SB3
Mabye your Altmann JISCO+UPCI is helping you ?
Please try without the Altmann JISCO+UPCI over Optical.
Both me and Hammer65 hear the differance in
omega;212059 Wrote:
Hi Agian Phil Leigh!
Thanks for giving this a try! :-)
Can you test one more thing?
If you have a Optical cable, Try the Optical Out from SB3
Mabye your Altmann JISCO+UPCI is helping you ?
Please try without the Altmann JISCO+UPCI over Optical.
Both me and
I recommend vintage solid state if you want a receiver for an office or
other secondary system. Look for something manufactured in the mid 70s
to early 80s. Sansuis (9090, 7070, etc.) are my favorite, with Pioneer,
Marantz, and Yamaha from that same period close behind. You should
easily be
Hi Phil.
I just tried to set the Analog out Volume on 100% (On The remote)
But the same thing,
Way are you thinking about the Analog output ?
My PREAMP VOLUME CONTROL is 0 In slimserver.
can you clarify...do you hear this effect with both stream flac as
wav and stream flac as flac?
-Yes i Do
Phil.
I Run on 6.5.2 but i will try to downgrade. (Running out of ideas now)
Best Regards!
/Mats :-)
--
omega
omega's Profile: http://forums.slimdevices.com/member.php?userid=9336
View this thread:
omega;212068 Wrote:
Hi Phil.
I just tried to set the Analog out Volume on 100% (On The remote)
But the same thing,
Way are you thinking about the Analog output ?
My PREAMP VOLUME CONTROL is 0 In slimserver.
can you clarify...do you hear this effect with both stream flac as
wav and
HI igain Phil! :-)
Thank for all your time and chatting with me!
Ok now i understand i will try this 63 setting.
Mabye not this evening, Me and my girfriend live in a flat, And is´s
quite late here in sweden for more testing.
I send i report later!
One more Question,
You are running with Tact
omega;212077 Wrote:
HI igain Phil! :-)
Thank for all your time and chatting with me!
Ok now i understand i will try this 63 setting.
Mabye not this evening, Me and my girfriend live in a flat, And is´s
quite late here in sweden for more testing.
I send i report later!
One more
ok Phil i understand.
I Have a good room with big paintings on the walls to kill nasty room
echos etc, and a very big carpet on the floor.
And Camebride Azur 840a amp.
Do you listen in stereo or 5.1 ?
To bad that you cant turn the TACT room correction off.
I think it´s harder for you to hear
Mats,
I listen to music in 2.1...5.1 is for DVD/HDTV only.
I don't think the TACT is doing anything much - but the Altmann devices
may be. If the problem is related to clocks/jitter...that is what the
Altmann devices address.
Regards,
Phil
--
Phil Leigh
You want to see the signal path BEFORE
Phil, I liten only in stereo,
Please try, if you have the time without the altman, And with Optical
some day.
If you can hear the things i and Hammer65 do without the altman then
we know it´s jitter or clocks.
I don´t know how good the X-DAC v3 is on treating jitter?
My friend Hammer65 have
Gotta be the acid.
--
Pale Blue Ego
Pale Blue Ego's Profile: http://forums.slimdevices.com/member.php?userid=110
View this thread: http://forums.slimdevices.com/showthread.php?t=36503
38 matches
Mail list logo