Well I figured it out. Once I changed the rmon to
boot manually and ignore nvram I was able to boot from rom. From there it was
easy as pie. Thanks
Nathan
i think debug dialer should tell you the required information. Make sure you
have explicitly defined the traffic that is permitted to initiate the dial
connction.
Regards
Atif
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Nahrajieh Anggaon
Sent: Tuesd
Wednesday at 1:30 for the CCNA.
I figure to review the books tomorrow for the day and get a good nights
sleep.
Now if I can only figure what an IOS is! kidding, I'm up to here with
the IOS!
Let's just hope no brain fog. I've decided to keep the Ciscobot going in
case other students find it usefull
I've never used a 1700, but if the command set is Cisco IOS, then use "debug
dialer". That should do the trick for you.
-John
> Dear friends,
>
> How do you monitor traffic that trigger DDR on a Cisco isdn router? What
> command do you use to monitor in real time what station is causing th
have u got any access lists in place ?
Regards
Atif
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Jose Luis Canillas
Sent: Tuesday, July 11, 2000 12:29 AM
To: cisco
Subject: Weird response
Hi all,
Can someone tell me why is it that I can traceroute
Thanks Raf, I am more concerned with the interoperability issues between
the 301 IDU and the AS5300, as we are using the satellite to carry VoIP
from dial in users from the 5300.
I dun really have the info on the antenna size as am not a satellite
person, but we are using APSTAR and C-band. Ou
Remember mrtg does its monitoring with snmp (I suppose cricket does the
same, I never used it though).
This means you can monitor everything available on that router with snmp,
memory, blocks, errors, processes, temperature, lots of things. Just get
yourself a free MIB browser if needed and take a
Question!
I am in the BSCN class, by ASCOLTA training, and it is an excelent course.
I know it probably will not be on the exam but when I issue the
show eigrp neighbors command the following results are displayed:
IP-EIGRP Neighbors for process 77
Address Interface Holdtime
Hi,
It would be good if the IOS configuration is also posted along with the
e-mail, this will help in analyzing the problem.
Regards,
Srinivas
"Nahrajieh Anggaon" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Dear friends,
>
> How do you monitor traffic
Hi..
I am CCNA, sun certified admin, MCSE CNE and some other cert's too but now I
am in a dilemma. As some of the seniors here and friends have suggested that
instead of going in for CCNP I start preparing for CCIE directly...
I would like to ask the Guru's of Cisco in this group to suggest what
I've only skimmed this, so I may not have understood the requirements correctly.
However, some providers offer 'standby' PVCs. These cost much less than a
normal PVC (at least over here - 10% I think), and are only active in the event
of a failure of the main PVC.
So if you have a setup where
Hello,
Can somebody help me with tips, links to resources, ... about
calling in with a ISDN modem into a CISCO 800.
Thanks
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstud
hi everyone
Can anyone tell me how can I connect novell client to a remote novell
server thru' 2 ISDN route. How do I configure the ISDN route to advertise
that there is a novell server on the other.
___
UPDATED Posting Guidelines: http://www.groupstudy.com
stepping stones or the big leap?
the same ground is covered
usually the incremental approach has the lower risk
> --
> From: Muralidhar A.[SMTP:[EMAIL PROTECTED]]
> Reply To: Muralidhar A.
> Sent: 11 July 2000 08:47
> To: cisco freinds
> Subject: dilemma.
>
>
U can directly take ccie
regards
--
T. Mohamed Abubakkar Siddiqu CCNA
"Muralidhar A." <[EMAIL PROTECTED]> wrote:
> Hi..
> I am CCNA, sun certified admin, MCSE CNE and some other cert's too
> but now I
> am in a dilemma. As some of the seniors here and friends have suggested
> that
> i
what do you want to know ?
"Kurt Claeys ADIFO" wrote in message <8kepd1$aig$[EMAIL PROTECTED]>...
>Hello,
>
>Can somebody help me with tips, links to resources, ... about
>calling in with a ISDN modem into a CISCO 800.
>
>Thanks
>
>
>
>
>___
>UPDATED Posting Guidel
Ron Rella
LAN / WAN Engineer
YOUpowered, Inc.
we are permission based personalization...
www.YOUpowered.com
One Silicon Alley Plaza
90 William Street, suite 202
New York, NY 10038
E-mail - [EMAIL PROTECTED]
Phone 212.324.1400
Fax 212.324.1430
Cell914.450.9439
The view
yeah why not?
just do it so many times you know what to expect, that way you get thro'
eventually. Like the monkey and typewriters thing, does that apply to CCIE
as well as the complete works of shakespear?
Seriously tho', if you are going to learn all you need for the CCIE you
might as well d
You know, since Patrick brought this up...
NT will, by default, use protocols in the order in which they were
installed. By default, Netbeui and NWLink are installed on NT, and if
TCP/IP is installed afterwards, NT (And Outlook/Exchange) will attempt to
use Netbeui and NWLink first, and won't ev
In preparing for the CCNP you are preparing for the CCIE. All of the things
that you will learn in the CCNP will be invaluable towards your pursuit of
the CCIE. Think about it.. ACRC (now BCSN) is all about router config with
high end routing protocols.. I wonder where you will see that again??? M
Here are a couple... (for the written...)
CCIE Prep Kit 350-001 : Routing and Switching
http://www1.fatbrain.com/asp/bookinfo/bookinfo.asp?theisbn=078972359X
The Cisco Ccie Study Guide, Second Edition
http://www1.fatbrain.com/asp/bookinfo/bookinfo.asp?theisbn=0071356762
on the way...
CCIE Routi
Hey...Howdy..
What is the BEST Network Analyzer recommended ? Fluke Enterprise Meter ?
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclos
One question that I could not find the answer for in the archives. Do you
get any certification kit after taking each individual test in the CCNP
track for example for BSCN?
Regards
Jon MCSE, CCNA,CCDA
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list
Folks,
What is our final goal, get a paper(ccna, ccnp, ccie) or
actually learn everything about cisco.
Juan
-Original Message-
From: Tim O'Brien [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, July 11, 2000 8:22 AM
To: Muralidhar A.; [EMAIL PROTECTED]
Subject: Re: dilemma.
In pr
All,
I desperately need
to upgrade the IOS on my 2621 to ver 12.0(?) Enterprise release so that I can
get through some labs and was wondering if someone could advise me on how
SmartNet works. If I buy a contract will this enable me to upgrade to a better
IOS? Or am I just better off buy th
Title: SAP filters
Hello, group.
In my review for ACRC, I came across several areas that were not easy to digest. One of them is
SAP filters. It says: when SAP input filter is in place, the propagated SAP updates represent the entire table, but contain only a subset of all services. When a SAP
You get a receipt that's about it. No you don't get anything until you pass
the last exam
Derek S. Winchester
Sr. Wan Engineer (CCNP)
Data Communications Department
[EMAIL PROTECTED]
Phone: 410-953-4887
Cell: 443-562-3456
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECT
Well, it's like this. The CCNP certification has 2 versions. Version 1 is
basically made up of the old exams, namely ACRC, CLSC, CMTD and CIT.
Version 2 is made up of BSCN, BCRAN, BCMSN and Support. All of the old
exams will be retired on July 31 of this year. You may write any exam from
the ol
If this is just a few message (1-3) do not worry about it. Sometimes the
posters sends the message twice because the first time it did not show up
immediately. Plus the e-mail mail readers also have problems with sending
twice.
If it is a majority of messages look carefully at the headerss of b
Here is an interesting problem.
I have a client with a Cisco 2924XL switch. Most stations are
directly connected to the switch, however off of one of the switch
ports is an old Bay 10mb/s hub.
The problem is that stations connected to the hub cannot communicate
with stations connected to the
The funny thing of it is that on the PC side, the ping goes through and
the trace stops right on the last router. Could there be such an opposite
difference on the ping and trace technique of both O.S.? (CISCO & NT)
Tnx..
Jose Luis
-- Forwarded by Jose Luis Canillas/PY/ABNA
Someone asked about duplicate addresses and before I get 100 replies (even
if only 1% of the list responds) that is still 100+ replies), I wanted to
explain in more detail as to what I was referring. Here are two sample
headers from a duplicate message I received from [EMAIL PROTECTED]:
Header 1
Is there anyway to remove a specific line from an access list without
erasing the entire thing. Thanks in advance.
Best Regards,
Scott M. Trieste
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info
yeap! use:
no access-list 101 permit tcp any any eq 23 - or whatever the access-list
particulars are.
Hope that helps
Russ..
""Scott M. Trieste"" <[EMAIL PROTECTED]> wrote in message
8kf6re$91d$[EMAIL PROTECTED]">news:8kf6re$91d$[EMAIL PROTECTED]...
> Is there anyway to remove a specific line
Juan,
"It Depends"
Only you can answer that. The goals have to be set by the individual. Some
people get certified to get their foot in the door to a new career completely.
Some will to change the emphasis from server administration to networking. Some,
to get a promotion or qualify for a
Hey Don,
Interesting problem.. Have you tried clearing the arp cache on the 2924? I
assume that the hosts connected to the hub are in the same subnet as the
ones on the switch? Any Vlans setup on the switch? Any access-lists setup?
Finally, have you tried erasing the config and starting from s
nop!!
[EMAIL PROTECTED] on 11/07/2000 03:58:00 AM
To: Jose Luis Canillas/PY/ABNAMRO/NL@ABNAMRO, [EMAIL PROTECTED]
cc:
Subject:RE: Weird response
have u got any access lists in place ?
Regards
Atif
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTE
The Problem may be the Cable or Crimping. The Switch may Expect two Pairs.
The LED will glow even one pair is correct. Check the Connectivity by
changing the Cable.
Regards
siddiqu.T
--
T. Mohamed Abubakkar Siddiqu CCNA
"Don Dettmore" <[EMAIL PROTECTED]> wrote:
> Here is an intere
could this happen because you have to use a crossover cable between the hub
and the switch ?
or
are there any VLANs on the catalyst ?
---
Gabriel Neagoe, GN379-RIPE
Networking solutions consultant
Cisco product manager, CCNA, CCDA
S&T Romania
tel: +401
It is not possible in Cisco.
But one stupid Idea.
U just transfer the configuration into TFTP server.
Edit the Configuration and transfer back.
regards
siddiqu .T
--
T. Mohamed Abubakkar Siddiqu CCNA
"Scott M. Trieste" <[EMAIL PROTECTED]> wrote:
> Is there anyway to remove a spec
How can I ping the MAC address of a host. Is it just like pinging the ip
address. I tried it but didn't get response. What will be the syntax?
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
___
Daryn,
Are you using 3Com NICs on any devices? I've noticed that 3Coms DO
NOT autonegotiate correctly with Cisco set-based switches. One side will
always come up half duplex, the other side full. Intel and Compaq NICs
don't seem to have this problem. You're better off hardcoding everyth
On page 351 of the Cisco Press CCNA study guide it states Only named access
lists allow individual statements to be deleted. Numbered lists only allow
for deletion of the entire list. Insertion of the new statement into the
list will require deletion and re-addition of all statements after the n
Hi John, thanks for the reply.
Yes Howard is very correct, and a little more info here is required.
Here is the deal...
1) My company is in the startup phases of a datacenter that will have a
varitity of services, ISP, ASP, Outsourcing, distributed servers, etc. Think
of exodus on a local scale
Hi All
I have connected 2 cisco 801 ISDN routers using 64k link , but when i ping
from SITE A to SITE B or viseversa
it replies
!.!.!.!..!.!.!.!..!.!.!.!.!..!.!.!.!.!.!.!.!.!.!..!..!.!.!.!...!.!.!...!.!..
!. with 48% Success rate , can any body tell why its not 100%
am i missing some thing
Maybe a layer one problem?
Seems that the switch can see the hub. The hub can't see the switch. Do you
have link both ends? Have you substituted the patch cable between them?
Alternatively do you have a packet analyzer such as EtherPeek to stick in
the hub to see if it sees the pings, arp requests
Folks,
> What is our final goal, get a paper(ccna, ccnp, ccie) or
> actually learn everything about cisco.
None of the above..
To have fun, be a better father and husband.
Laugh a lot
Do what I can to the best of my ability.
Know what I know and know what I don't know.
All the other
Hi
I would like to ask some general questions
regarding Cisco exams:
1) No of questions in these
exams
2) Time allowed
3) On the Cisco Site, it says
that for CCDP, you can sit for the Remote Access, Switching, Routing and CID
exams. Do you have to have CCNA and CCDA status befor
Thanks,
Stan Rossetti
Russia Services Group
Email: [EMAIL PROTECTED]
Phone: (256) 544-5031
Beeper: 544-1183 pin # 0112
> -Original Message-
> From: Rossetti, Stan
> Sent: Tuesday, July 11, 2000 9:56 AM
> To: 'Mohamed Abubakkar Siddiqu'
> Subject: RE: Access List Question
Hi,
Can anyone let me know if they have 2520 and 2900 enterprise series for
sale.I am in the UK.
Much apprecited if anyone can get back to me .
Thanks.
dennis
Get Your Private, Free E-mail from MSN Hotmail at http://www.hot
Actually it is possible in Cisco,
for standard lists do:
(config)# ip access-list standard 10
(config-std-nacl)#no permit blahblahblahblah
for extended do:
(config)#ip access-list extended 102
(config-ext-nacl)# no deny blahblahblah
You'll probably only find this on newer IOS versions
Paul
Phil:
This nails it down as destined for a telco supply. Yes, Phil, the polarity
switch is
all that is required. Marlin P Jones has one -48 VDC 1 amp (roughly 48
watts)
for $56, and one used -48 VDC 15 amps (roughly 750 watts) for $40.
A little history: telephone companies use/used batteries to
The mail server used for groupstudy is maintained for our use and completely
free of charge to us. Because of this, there is not much funding for
upgrades, which in turn results in this not being the most powerful server.
Paul (The Man!) Borghese does his best to maintain this service for us, but
Oz:
Oh my, I'm deeply offended.
Actually, I never recommended 4 car batteries, but it
can be done that way. Wire them in series, charge them
in parallel. (Did I forget to mention that I am a Certified
Electronics Technician?)
Phil has verified the voltage specs in a personal post.
Hey Ray- th
Well, I could be wrong but maybe this is different for various (newer vs.
older as well?) switches and/or different OSes. Leigh Anne did mention this
for the 5000/5500 but just guessing, it looks like Joe's output is from a
4000.
What I do know is that the Cisco Press LAN Switching book suppor
Hi guys.
Does anyone know of a good CCIE Boot Camp in the Florida State?.
I've heard of good study sessions in trainning centers with certified
instructors to practice for the exam, but I don't remember any of them.
Thanks a lot in advance.
César Enrique
___
You can do this with the "os2ping" command. That is if you are running OS/2.
Scott
Peter Gray wrote:
> How can I ping the MAC address of a host. Is it just like pinging the ip
> address. I tried it but didn't get response. What will be the syntax?
> _
I stand corrected! :)
""Stull, Cory"" <[EMAIL PROTECTED]> wrote in message
0D7A05A19CE4D211BD050008C7330FE7147CAD@CCUPDC">news:0D7A05A19CE4D211BD050008C7330FE7147CAD@CCUPDC...
> On page 351 of the Cisco Press CCNA study guide it states Only named
access
> lists allow individual statements to be d
Bob, nice move! Those books are worth some cash! As far as the content,
the problems you'll face are going to be primarily with the ACRC and CLSC
books as the content of the new tests has changed dramatically. BCSN (ACRC)
now concentrates on the routing protocols very heavily, particularly BGP,
congrats.. watch the CIT 4.0.. the english is brutal on the exam..
questions tend to contradict themselves as well as being unclear :)
""Lonnie Paschall"" <[EMAIL PROTECTED]> wrote in message
8kd07v$c4f$[EMAIL PROTECTED]">news:8kd07v$c4f$[EMAIL PROTECTED]...
> Just passed the BCRAN today. I used
Team:
Have multiple users on a floor experiencing slow
response (15 min) when pulling up AutoCad files. The
are on a dedicated switch that has VLAN 32 as it's
home. The users ip address subnet is #.#.33.#. This
is a 23 bit subnet. The server they are getting the
files from is on a different s
I am, as stated, just back from Peru, and deeply cultureshocked.
But I will try to make the dinner, if not the conference. I hope everyone
learns everything they hope to.
Ojos Estrellados
>From: "Chuck Larrieu" <[EMAIL PROTECTED]>
>To: "Starry Eyes" <[EMAIL PROTECTED]>
>Subject: Networkers i
Hello Gurus:
Any one has experience with Atm Tunneling. Any config.
and input please. thanks
__
Do You Yahoo!?
Get Yahoo! Mail Free email you can access from anywhere!
http://mail.yahoo.com/
___
UPDATED Posting Gui
wow! That's going to take someone with far more design experience than I
have. You're right, those SLAs have you backed into a corner,
technologically. Hopefully, someone on the list might be able to offer
better advice than I can.
Good luck!
John
> Hi John, thanks for the reply.
>
> Yes
Hi Oz,
Seriously, as a CCIE or Senior networking engineer do you have time to enjoy
your family and things that you like to do ?
""Oz"" <[EMAIL PROTECTED]> wrote in message
066e01bfeb46$2dcf6d70$[EMAIL PROTECTED]">news:066e01bfeb46$2dcf6d70$[EMAIL PROTECTED]...
> Folks,
> > What is ou
yes
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Thomas Lisa
Sent: Monday, July 10, 2000 12:26 PM
To: [EMAIL PROTECTED]
Subject: Repeat Messages
Is it just me, or are others getting resends of groupstudy messages from
before?
Tom Lisa, Instructor, C
The only thing I see in the config is the two static routes on each side.
Both point to the remote network, but their next hops are different. I'd
recommend getting rid of one of them on both side. Do a "show ip route", I
bet it is only showing the static to the Dialer. It's probably not causin
When you have a SAP input filter the router only learns about services that
are permited by the list.
When you have an outbound list the router only advertises services permitted
by the list.
Does that make better sense? I ran across the same thing when studying, the
books explenation was ve
For the purpose of the CCNA 2.0 exam does subnet
zero exist as far as Cisco is concerned and has anyone come across any mention
of it in the present 2.0 exam?
Karl
Does anyone know the current size of the BGP routing table?
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTE
This has been the best answer I have ever seen
It is hard to find these kind of thoughts these days in the year 2000.
sheers
Rgds
--Original Message--
From: "Oz" <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Sent: July 11, 2000 2:42:03 PM GMT
Subject: Re: dilemma.
Folks,
>
You know where you get 1 email a day? How can I get it if there is?
Sorry for the wasted bandwidth.
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and
Douglas,
It could be several things
What Type of Device is the switch (5500)?
How many users are on the Vlans? If it worked immediately, then it could be
a compiling of the broadcasts. Also, a simple way to do it, would either be
to just assign that Server to the Vlan the main user's are on!
You s
Hello everyone,
I am planning to study for BSCN exam. Can anyone
tell me if there are any institute/class for only the lab in
bay area.
TIA
RAJ PODUVAL
MCSE,CCNA,CCDA
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives,
The ultimate goal is to understand the concepts and execute your learnings
by some type of hands on experience.
There are things in the networking you would never learn from the books
unless you are faced to solved. Sure, a paper shows that you are goal
oriented, but if I was to hire someone I wou
Just wanted to check if my replies to group were working.
Matt Lange
CCNP CCDP MCSE CS
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosur
One of the first things I noticed in the config section under Interface
BRI0, you have
interface BRI0
bandwidth 64
Replace 64 with 64000?
Bob Schussler
Sales Engineer
Broadwing / Indianapolis
317-469-3719
-Original Message-
From: Muhammad Faheem [mailto:[EMAIL PROTECTED]]
Sent:
Has anyone sat this exam? I have the new Cisco Quick start book and it seems
to have alot of signaling and framing info. Is this book good for the exam?
Anyone have any reading suggestions on this exam? Thanks in advance.
David Cooper
CCNP/CCDP
___
UPDATED Post
It depends on the platform and software. The switches with which I am
familliar (the Catalyst 1900/2820 series) support several ports within one
VLAN. In terms of actual membership, a port can only be a member of only
one VLAN on these switches. In the case of trunk ports, they can carry
traffi
Anyone have any idea where I can find some info on Bay Networks 450 series
console cable pinout. It's a DCE connection but are unable to make any of
our cables work to get in.
We work mostly Cisco.
Thanks,
Ed
Get Your
I passed the CCDA today on my first shot! It was a
tough exam. Very deceiving. I used the following study
materials:
CCDA Study Guide by Todd Lammle
Top Down Network Design by Prescilla Oppenheimer
Practice exams by www.ccxxproductions.bigstep.com
Good luck to everyone in their certification effor
I have a DHCP server on one network and want clients from the other network
to be able to attain its ip address from this dhcp server. What are the
necessary commands needed to make this possible? I've tried "ip
helper-address" alone on the ethernet interface on the other side of the
dhcp server n
Hey Group,
I was just wondering if anybody had any links to, or any examples of labs
to work on for the CCNP or CCIE level of training. A friend and I are already
working on the "CCIE All-In-One Study Guide," but we were just wondering how
we could get more and if any of you had them. Any h
Has anyone needed to allow all Win2k admin BS
through a PIX firewall? RPC is about the only thing not working.
I've got it opened up 100% - including the following for RPC:
established
tcp 0 135 permitto tcp 135 permitfrom tcp 1024-65535
Anyone
dealt with this before? There are Win2K
Hi:
I have ciscoSecureACS 2.4 for NT authenticating dial-in users against the NT
user database. Now I have a few users who don't have accounts in the NT
domain but need access to the network and need to be authenticate when they
dial in. I could create local accounts for them either on NAS or in
Yes there are they are called refurbished routers. The only way you can
practice for the ccnp stuff is to go and by refurbed or used routers.
You can pick up a 2501 for about 900$ and a 2502 for about 600$.
Check out www.grandstore.com or network hardware resale. I by all my
stuff from there.
We do not have CDP disabled anywhere on our routers, either globally or at
the interface level. I brought up a new PVC today and at the remote side I
could see both PVCs to that router. After a few seconds, though, one of
them disappeared from the "show cdp neighbors" output. No changes were ma
final goal
Oz wrote:
>
> Folks,
> > What is our final goal, get a paper(ccna, ccnp, ccie) or
> > actually learn everything about cisco.
>
> None of the above..
> To have fun, be a better father and husband.
> Laugh a lot
> Do what I can to the best of my ability.
> Know what I know
For T1 make a cable using cat5 and two RJ45 ends - cross pins 1+2 to pins
4+5 and you've got your T1 crossover.
For 56k CSU/DSUs cross 1+2 and 7+8 if I remember correctly.
Gary Alterson wrote:
> Hello all wiser than I:
>
> If I've got two 2600 series routers, both with the Internal T-1/
All,
Does anyone know of a good V.35 cable source? I'm in the process of
building my home lab for CCIE, and all the routers I've got have DTE cables.
I guess I need some DCE cables to go back-to-back, right? All the routers
are 2500s with 60 pin serial. I know I should know this, but I'v
checkig if my replies work
Matt Lange
CCNP CCDP MCSE CS
Oz wrote:
>
> Folks,
> > What is our final goal, get a paper(ccna, ccnp, ccie) or
> > actually learn everything about cisco.
>
> None of the above..
> To have fun, be a better father and husband.
> Laugh a lot
> Do what I can
Don't undervalue X.25. It is still in use within
the US, but in Europe and other places around the
globe, X.25 is very widely used. As Cisco is a global
company, your certification should be globally
based and not based on what is in use in the US
today.
Regards Kamoto
--- Russell Lusignan
<[E
Did you run "debug cdp" to verify that it is being sent?
-Mag
Magnus Thorne
eVoice, Inc.
1394 Williow Road
Menlo Park, CA 94025
Direct: 650.330.3974
Main: 650.330.3700
Fax: 650.330.3901
-
It depends on what you want to do. Network Associates Sniffer is good as is
Dolch Systems products. TTC also makes excellent products as well, the
Thunderbirds and Firebirds are awesome, my favorite is the T-500.
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]O
To begin with, thanks for your reply.
Are you saying that Catalyst 1900/2820 series don't support trucking? So, a
port can belong to only one VLAN in these switches?
jeongwoo
--Original Message--
From: "tcpi" <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Sent: July 12, 2000 1:14:06 AM
bit shaky on this, but here goes...
there is a standard - G.703/704 - it's not just a cisco thing
T/S 0 is used for signalling, the remaining 31 channels (1-31) are used for
data - hence the 1,984kb/s bandwidth rather than the 2,048 you might expect.
Under a cisco E1 you would configure a virtua
Jose,
Pretty vague description... Are you on the same ethernet segment as the NT
server? More detail would help consolodate the problem. It could be a slew
of possibilities based on your description. Rephrase the question and I'd
be happy to reply.
Chris
>From: Jose Luis Canillas <[EMAIL
Here is full command that i know of.
interface ethernet 0
ip address #.#.#.# *.*.*.* ( user subnet and subnet mask)
ip helper-address &.&.&.& <-- DHCP server ip address
hope it helps
--Original Message--
From: "Richard" <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Sent: July 11, 2000 10:2
Hi,
I am new to ISDN concepts, but here they are
We have 23 DSO for carrying data. Each channel carries 8 bit word or
something. So
23 * 8 = 184
One channel is used for carrying signal . So the number comes out to be
184 + 8 = 192
Since 8000 samples are sampled per seco
1 - 100 of 133 matches
Mail list logo